www.HomeGunsmith.com Archive
Archive Date: Jul. 29 2014, 04:00 ET
This is an archive! Click here to go to the live site.

Home > Main Forums > Ask a Guru
Screwed action  (Started: Jul. 16 2014, 06:08 ET, Last post: Jul. 28 2014, 19:07 ET)
Is it strong???
End mill shifting  (Started: Jul. 26 2014, 11:18 ET, Last post: Jul. 27 2014, 22:49 ET)
Interrupted thread action  (Started: Jul. 21 2014, 09:46 ET, Last post: Jul. 24 2014, 12:38 ET)
Primer flowing problem  (Started: Jul. 2 2014, 19:17 ET, Last post: Jul. 22 2014, 00:09 ET)
300 whisper  (Started: Jul. 14 2014, 11:32 ET, Last post: Jul. 19 2014, 16:27 ET)
Bolt thrust
Any mauser experts here?  (Started: May 13 2014, 20:45 ET, Last post: Jul. 16 2014, 12:16 ET)
Westernfield model 550 ca 20 ga  (Started: Jul. 10 2014, 16:39 ET, Last post: Jul. 13 2014, 23:54 ET)
Action slide tube assembly
Ruger p85 rear sight removal  (Started: Jul. 5 2014, 13:36 ET, Last post: Jul. 5 2014, 14:09 ET)
How to
Double rifle action  (Started: Jun. 29 2014, 20:44 ET, Last post: Jul. 2 2014, 18:08 ET)
Odd duck, odd question: m.ward sb-100br  (Started: Jun. 30 2014, 17:58 ET, Last post: Jun. 30 2014, 19:42 ET)
Removing the forearm
Bolt/block thrust  (Started: Jun. 29 2014, 21:32 ET, Last post: Jun. 30 2014, 07:52 ET)
Barrel brazing question  (Started: Jun. 27 2014, 22:03 ET, Last post: Jun. 28 2014, 00:49 ET)
Friction tube ignition for smokeless firearms?  (Started: May 26 2014, 13:28 ET, Last post: Jun. 27 2014, 19:49 ET)
Friction tube ignition - is it worth it?
Barrel id  (Started: Jun. 23 2014, 15:11 ET, Last post: Jun. 24 2014, 00:12 ET)
Gunsmith's screwdriver?  (Started: Jun. 11 2014, 23:27 ET, Last post: Jun. 23 2014, 20:40 ET)
Help identifying old tools
870 ejector spring replacement  (Started: Jun. 20 2014, 02:05 ET, Last post: Jun. 20 2014, 14:08 ET)
Any tips or tricks on replacing these?
Kimber 84m recent recall  (Started: Jun. 18 2014, 23:52 ET, Last post: Jun. 18 2014, 23:52 ET)
Preparing for anodizing  (Started: Jun. 8 2014, 09:35 ET, Last post: Jun. 16 2014, 01:07 ET)
Preparing an ar receiver for finishing
Milling an m&p slide for red dot  (Started: Jun. 10 2014, 18:31 ET, Last post: Jun. 13 2014, 21:39 ET)
Milling an m&p slide for red dot
Picture attachment  (Started: Jun. 7 2014, 07:11 ET, Last post: Jun. 7 2014, 09:07 ET)
Picture attachment
Rifling twist vs. barrel life  (Started: May 30 2014, 17:49 ET, Last post: Jun. 5 2014, 20:41 ET)
Any difference?
Mill table leveling  (Started: Feb. 14 2014, 14:02 ET, Last post: Jun. 4 2014, 21:06 ET)
For the kiddies
Shotgun  (Started: Jun. 1 2014, 10:47 ET, Last post: Jun. 3 2014, 09:41 ET)
Cut & crown
Over and under action designs?  (Started: May 31 2014, 20:20 ET, Last post: Jun. 1 2014, 07:19 ET)
Pins  (Started: May 30 2014, 14:40 ET, Last post: May 30 2014, 22:18 ET)
Magnets
Winchester 94  (Started: May 29 2014, 13:43 ET, Last post: May 30 2014, 17:56 ET)
Mainspring compression tool
Bedding pillar material  (Started: May 22 2014, 17:09 ET, Last post: May 23 2014, 17:39 ET)
Pillar material
Condition h1000  (Started: May 17 2014, 22:22 ET, Last post: May 22 2014, 12:14 ET)
How big a barrel for 700  (Started: May 16 2014, 09:23 ET, Last post: May 18 2014, 07:35 ET)
Help with 1911 slide  (Started: Apr. 18 2014, 19:06 ET, Last post: May 15 2014, 03:02 ET)
Possible 1911 9mm armscorp medallion
Ar 10 lower drawings  (Started: May 10 2014, 10:20 ET, Last post: May 10 2014, 18:15 ET)
Help !
Ruger m77 mark ii  (Started: Apr. 2 2014, 00:27 ET, Last post: May 10 2014, 14:08 ET)
Bedding
What's my major malfunction?!  (Started: May 7 2014, 19:39 ET, Last post: May 9 2014, 22:29 ET)
Cartridge based on the rim diameter of 300 wtb  (Started: May 5 2014, 20:17 ET, Last post: May 9 2014, 21:23 ET)
Barrel turning question  (Started: May 2 2014, 19:24 ET, Last post: May 8 2014, 17:36 ET)
Avoiding chatter
Stamping †caliber on barrel,speerchucker  (Started: May 7 2014, 21:49 ET, Last post: May 8 2014, 08:51 ET)
Blown up gun  (Started: Apr. 16 2014, 17:35 ET, Last post: May 7 2014, 19:57 ET)
Oops
Colt 1860 copy problems  (Started: May 1 2014, 12:19 ET, Last post: May 6 2014, 10:31 ET)
Busted tap in the frame
Heat treating medium  (Started: May 1 2014, 19:41 ET, Last post: May 5 2014, 22:29 ET)
Savage model 101  (Started: May 3 2014, 02:16 ET, Last post: May 3 2014, 02:16 ET)
Er 40 collets  (Started: May 2 2014, 22:08 ET, Last post: May 3 2014, 00:42 ET)
Mauser bolt shroud heat treat?  (Started: Apr. 25 2014, 21:55 ET, Last post: May 2 2014, 00:29 ET)
Gauge and mm/inch  (Started: Apr. 23 2014, 16:45 ET, Last post: Apr. 29 2014, 12:25 ET)
Remington 700  (Started: Apr. 27 2014, 01:44 ET, Last post: Apr. 27 2014, 10:32 ET)
Timney triggers
Installing  (Started: Apr. 24 2014, 19:28 ET, Last post: Apr. 25 2014, 01:07 ET)
Pesky mainsprings
Barrel blank questions  (Started: Apr. 21 2014, 19:44 ET, Last post: Apr. 22 2014, 15:52 ET)
Direction of bullet travel
Rotary table recomendations, please?  (Started: Apr. 18 2014, 22:59 ET, Last post: Apr. 20 2014, 23:10 ET)
Need help selecting rotary table
Winchester 1886 takedowns  (Started: Mar. 31 2014, 21:00 ET, Last post: Apr. 17 2014, 10:34 ET)
Barrel tenon threads  (Started: Apr. 16 2014, 17:59 ET, Last post: Apr. 16 2014, 20:26 ET)
223 wydle  (Started: Apr. 13 2014, 10:44 ET, Last post: Apr. 16 2014, 14:22 ET)
223 wydle chambering info
Tasco custom shop 2-8, 30mm tube  (Started: Apr. 15 2014, 18:57 ET, Last post: Apr. 15 2014, 18:57 ET)
Any good
Norinco m305  (Started: Apr. 13 2014, 21:18 ET, Last post: Apr. 13 2014, 22:02 ET)
Brake
Izy cm-2 receiver  (Started: Apr. 12 2014, 21:27 ET, Last post: Apr. 12 2014, 21:27 ET)
Cynergy not cocking  (Started: Apr. 8 2014, 02:05 ET, Last post: Apr. 8 2014, 10:20 ET)
Kessler model 30c  16 ga  (Started: Apr. 7 2014, 12:02 ET, Last post: Apr. 8 2014, 09:39 ET)
Safety
Single shot action adaptable to .38 special  (Started: Apr. 6 2014, 04:06 ET, Last post: Apr. 7 2014, 17:18 ET)
Break, falling block, bolt action
Milling barrel hole on 80% 10-22 receiver  (Started: Mar. 1 2014, 14:07 ET, Last post: Apr. 6 2014, 22:39 ET)
Ruger 22/45 mkiii help  (Started: Apr. 3 2014, 19:03 ET, Last post: Apr. 6 2014, 19:08 ET)
Mis firing
Rolling block question  (Started: Mar. 27 2014, 20:02 ET, Last post: Apr. 2 2014, 08:48 ET)
Ackack brake  (Started: Mar. 31 2014, 16:39 ET, Last post: Apr. 1 2014, 08:53 ET)
Just for giggles
Nosler  (Started: Mar. 29 2014, 14:34 ET, Last post: Mar. 31 2014, 23:20 ET)
Quality control
Parabolic drills  (Started: Mar. 30 2014, 10:42 ET, Last post: Mar. 31 2014, 01:08 ET)
How about dat!
Printing on rifle  (Started: Mar. 21 2014, 19:50 ET, Last post: Mar. 28 2014, 16:34 ET)
End of the madness  (Started: Mar. 28 2014, 13:48 ET, Last post: Mar. 28 2014, 15:56 ET)
Digital depth mic
Uses for old mower blades?  (Started: Aug. 4 2013, 10:38 ET, Last post: Mar. 26 2014, 22:39 ET)
6.5-06 or what?  (Started: Mar. 23 2014, 19:07 ET, Last post: Mar. 26 2014, 20:43 ET)
Can't decide
Mauser takedown rifle  (Started: Feb. 2 2014, 13:50 ET, Last post: Mar. 25 2014, 11:44 ET)
Barrel blanks  (Started: Mar. 22 2014, 12:02 ET, Last post: Mar. 23 2014, 16:33 ET)
How much is usable
Proof loads  (Started: Feb. 20 2014, 15:49 ET, Last post: Mar. 18 2014, 21:47 ET)
Izhmash toggle bolt  (Started: Mar. 4 2014, 10:04 ET, Last post: Mar. 16 2014, 11:24 ET)
More education...
Getting a blank firer to cycle ?  (Started: Mar. 11 2014, 16:19 ET, Last post: Mar. 16 2014, 04:08 ET)
Reamers  (Started: Mar. 8 2014, 01:27 ET, Last post: Mar. 11 2014, 23:35 ET)
Solid or interchangeable pilot
Shotgun  (Started: Mar. 11 2014, 17:41 ET, Last post: Mar. 11 2014, 17:41 ET)
Test fire caps
25-06 to † ackley.  (Started: Mar. 6 2014, 19:58 ET, Last post: Mar. 10 2014, 19:28 ET)
700 extractor  (Started: Mar. 7 2014, 13:57 ET, Last post: Mar. 10 2014, 09:28 ET)
Fitting
Remington shell stops  (Started: Mar. 4 2014, 22:33 ET, Last post: Mar. 7 2014, 00:06 ET)
Re-staking
Just for giggles  (Started: Mar. 3 2014, 12:50 ET, Last post: Mar. 6 2014, 17:30 ET)
Yah recon nuff powder?
Voere 2165 7mm magnum  (Started: Feb. 25 2014, 19:32 ET, Last post: Feb. 26 2014, 21:59 ET)
Looking for parts info
Remington 40x  (Started: Feb. 25 2014, 08:46 ET, Last post: Feb. 25 2014, 10:31 ET)
Education
S&w 629 hammer nose  (Started: Feb. 24 2014, 15:07 ET, Last post: Feb. 24 2014, 15:07 ET)
Looking for drawing / pic of hammer nose
Q: best materials for firearm boxes & liners  (Started: Feb. 19 2014, 14:22 ET, Last post: Feb. 20 2014, 20:11 ET)
Looking for suggestions
Looking for a good rear target sight for a pistol  (Started: Feb. 17 2014, 15:21 ET, Last post: Feb. 20 2014, 02:43 ET)
Single point action threads  (Started: Feb. 15 2014, 11:36 ET, Last post: Feb. 18 2014, 00:25 ET)
Browning 1885  (Started: Feb. 7 2014, 09:32 ET, Last post: Feb. 17 2014, 23:59 ET)
What metal to use
Mossberg 535 mag tube  (Started: Feb. 17 2014, 17:19 ET, Last post: Feb. 17 2014, 19:57 ET)
Why red loctite?
500 mossberg heavy trigger pull  (Started: Feb. 8 2014, 15:27 ET, Last post: Feb. 17 2014, 15:28 ET)
Question for you falling block gurus  (Started: Feb. 15 2014, 18:12 ET, Last post: Feb. 15 2014, 22:30 ET)
Chicopee cf  (Started: Feb. 10 2014, 17:51 ET, Last post: Feb. 12 2014, 01:11 ET)
Opinions
10/22 barrel for a falling block action  (Started: Feb. 3 2014, 15:58 ET, Last post: Feb. 7 2014, 18:16 ET)
Can it be done?
Drilling & tapping  (Started: Feb. 5 2014, 13:46 ET, Last post: Feb. 7 2014, 06:51 ET)
Receiver sights
Demilled ak part  (Started: Jan. 28 2014, 18:23 ET, Last post: Feb. 4 2014, 20:13 ET)
Need suggestions
Left hand slug barrels for 870 remington  (Started: Feb. 3 2014, 15:15 ET, Last post: Feb. 4 2014, 13:03 ET)
Anyone know of a supplier
Rohm rg38  (Started: Feb. 4 2014, 10:13 ET, Last post: Feb. 4 2014, 10:13 ET)
Safety lever
Wsm from 223 action  (Started: Jan. 25 2014, 13:35 ET, Last post: Feb. 1 2014, 17:50 ET)
Plans for the frank de haas chicopee rifle  (Started: Jan. 29 2014, 00:18 ET, Last post: Feb. 1 2014, 11:20 ET)
Plans
O-1 steel  (Started: Jan. 26 2014, 20:52 ET, Last post: Jan. 28 2014, 12:27 ET)
20 guage plans?  (Started: Jan. 26 2014, 20:23 ET, Last post: Jan. 28 2014, 02:48 ET)
Looking for 20 guage plans / champer dim
Welding pits  (Started: Jan. 19 2014, 21:25 ET, Last post: Jan. 26 2014, 16:14 ET)
Cutting forward camming area for a bolt rifle  (Started: Jan. 23 2014, 14:55 ET, Last post: Jan. 26 2014, 00:54 ET)
Any idea's
Rem choke dimensons  (Started: Jan. 20 2014, 19:38 ET, Last post: Jan. 23 2014, 19:51 ET)
Rem choke dimensons  in the barrel
Savage 24v  (Started: Jan. 22 2014, 17:06 ET, Last post: Jan. 23 2014, 16:06 ET)
Barrel attachment
Remington rolling block #1 question  (Started: Jan. 17 2014, 16:01 ET, Last post: Jan. 22 2014, 20:43 ET)
Headstock  (Started: Jan. 22 2014, 05:13 ET, Last post: Jan. 22 2014, 19:45 ET)
Why short length?
Savage magazine box  (Started: Dec. 27 2013, 18:54 ET, Last post: Jan. 20 2014, 18:57 ET)
Removing magazine box
Brake  (Started: Nov. 26 2013, 19:53 ET, Last post: Jan. 19 2014, 00:16 ET)
Brake
Locking lug question  (Started: Jan. 12 2014, 12:34 ET, Last post: Jan. 15 2014, 00:57 ET)
Help!  (Started: Jan. 6 2014, 18:01 ET, Last post: Jan. 12 2014, 10:35 ET)
Lathe question
How much do you guys trust a 1911's thumb safety?  (Started: Dec. 27 2013, 10:18 ET, Last post: Jan. 11 2014, 01:43 ET)
41v50  (Started: Jan. 3 2014, 10:41 ET, Last post: Jan. 7 2014, 09:59 ET)
Barrel info
Barrel vise and wrench  (Started: Dec. 31 2013, 13:10 ET, Last post: Jan. 3 2014, 14:30 ET)
Barrel vise and wrench
Headspace problem  (Started: Dec. 28 2013, 10:08 ET, Last post: Dec. 31 2013, 08:35 ET)
Savage 24v has a headspace problem
Model 70 fire array disassembly tool  (Started: Dec. 7 2013, 13:03 ET, Last post: Dec. 30 2013, 00:29 ET)
Something to do on a cold day
Q bout m4 barrel profile  (Started: Dec. 22 2013, 22:45 ET, Last post: Dec. 26 2013, 15:12 ET)
What's this for?
Sights for stevens 44  (Started: Dec. 23 2013, 12:17 ET, Last post: Dec. 23 2013, 15:43 ET)
3d printing  (Started: Dec. 22 2013, 18:37 ET, Last post: Dec. 23 2013, 10:24 ET)
Parabolic drills  (Started: Dec. 13 2013, 17:05 ET, Last post: Dec. 22 2013, 21:43 ET)
I'll be damned
Bullet identification  (Started: Dec. 18 2013, 18:11 ET, Last post: Dec. 21 2013, 04:09 ET)
Drill grinder  (Started: Dec. 17 2013, 14:37 ET, Last post: Dec. 19 2013, 20:40 ET)
Way besterer than aw45s universal grinde
Reducing pistol barrel diameter  (Started: Dec. 9 2013, 02:08 ET, Last post: Dec. 18 2013, 21:58 ET)
Turning pistol barrel diameter.
Stevens favorite 1894 frame screws  (Started: Dec. 14 2013, 12:22 ET, Last post: Dec. 14 2013, 15:08 ET)
M305 flash hider  (Started: Dec. 12 2013, 13:13 ET, Last post: Dec. 13 2013, 21:00 ET)
Nother tool
Silly 22  (Started: Dec. 2 2013, 16:09 ET, Last post: Dec. 7 2013, 18:19 ET)
Silly 22
Double falling block  (Started: Nov. 27 2013, 20:22 ET, Last post: Dec. 6 2013, 17:01 ET)
"gonna be dual..."
A question on semi-auto's?  (Started: Dec. 5 2013, 16:37 ET, Last post: Dec. 5 2013, 17:19 ET)
Lift table  (Started: Nov. 29 2013, 14:17 ET, Last post: Dec. 3 2013, 21:38 ET)
Lift table
Remington model 11 hammer  (Started: Dec. 3 2013, 08:26 ET, Last post: Dec. 3 2013, 09:57 ET)
Worn!
Falling block extractor  (Started: Nov. 27 2013, 07:50 ET, Last post: Dec. 1 2013, 19:06 ET)
Connecting falling block to the lever  (Started: Oct. 22 2013, 21:08 ET, Last post: Nov. 27 2013, 20:49 ET)
Muzzleloader breah plug - type of steel?  (Started: Oct. 25 2013, 12:20 ET, Last post: Nov. 26 2013, 22:19 ET)
Need to make a breach plug
Subsonic ammo  (Started: Nov. 8 2013, 18:34 ET, Last post: Nov. 26 2013, 19:18 ET)
Does subsonic ammo produce less pressure
Mainspring compression tool  (Started: Nov. 21 2013, 12:43 ET, Last post: Nov. 23 2013, 13:28 ET)
Mainspring compression tool
Old 45/70  (Started: Oct. 18 2013, 20:21 ET, Last post: Nov. 20 2013, 20:04 ET)
What to do to it?
What steel for a falling block ?  (Started: Oct. 20 2013, 19:03 ET, Last post: Nov. 20 2013, 19:56 ET)
Anybody recognize this rifle?  (Started: Nov. 16 2013, 08:14 ET, Last post: Nov. 19 2013, 16:41 ET)
Remove blr front ramp  (Started: Sep. 17 2013, 17:09 ET, Last post: Nov. 13 2013, 01:26 ET)
Bolt handle rem700  (Started: Oct. 3 2013, 02:34 ET, Last post: Nov. 12 2013, 18:38 ET)
Old style 55/45 weaver bases  (Started: Nov. 2 2013, 11:43 ET, Last post: Nov. 4 2013, 18:24 ET)
Old style 55/45 weaver bases
What kind of steel,,,,,,,  (Started: Oct. 30 2013, 21:17 ET, Last post: Oct. 30 2013, 21:17 ET)
Sterling mkii 380 parts  (Started: Oct. 30 2013, 20:05 ET, Last post: Oct. 30 2013, 20:05 ET)
Ok steel for enfield flash hider pin?  (Started: Oct. 17 2013, 09:11 ET, Last post: Oct. 29 2013, 22:59 ET)
Can i just temper a nail?
Rifling or rifled liners  (Started: Oct. 17 2013, 17:19 ET, Last post: Oct. 23 2013, 13:19 ET)
Building a bond arms type derringer
Winchester 94, question about post 64 guns  (Started: Sep. 17 2013, 08:02 ET, Last post: Oct. 23 2013, 02:29 ET)
To shorten a barrel or not, that is the question  (Started: Oct. 9 2013, 13:57 ET, Last post: Oct. 22 2013, 22:32 ET)
Extrator cut in krag barrel  (Started: Oct. 22 2013, 10:00 ET, Last post: Oct. 22 2013, 21:53 ET)
How in the world ?  (Started: Oct. 15 2013, 19:07 ET, Last post: Oct. 16 2013, 14:33 ET)
Bronze dynamite pipe bomb trench mortar  (Started: Oct. 9 2013, 20:43 ET, Last post: Oct. 11 2013, 23:46 ET)
Anyone ever hear of one of these?
Mechanical drawings  (Started: Oct. 8 2013, 20:17 ET, Last post: Oct. 8 2013, 20:36 ET)
Mechanical drawings
Ar15 firing problems  (Started: Oct. 6 2013, 06:05 ET, Last post: Oct. 8 2013, 17:19 ET)
Bolts avail. for mauser actions  (Started: Oct. 5 2013, 18:28 ET, Last post: Oct. 5 2013, 20:59 ET)
Looking for bolts to fit my mauser actio
Er40 oversized collets for work holding  (Started: Oct. 1 2013, 14:25 ET, Last post: Oct. 5 2013, 19:07 ET)
Er40 oversized collets for work holding
Tell me how to....  (Started: Oct. 2 2013, 18:24 ET, Last post: Oct. 4 2013, 00:56 ET)
Scale drawings to usable size.
Convert romanian 22 trainer to 17hm2  (Started: Sep. 25 2013, 11:47 ET, Last post: Sep. 27 2013, 19:10 ET)
Ruger mark 1  (Started: Sep. 15 2013, 18:56 ET, Last post: Sep. 19 2013, 20:21 ET)
Hammer over traveling won't fire
Mauser modification question  (Started: Sep. 12 2013, 07:50 ET, Last post: Sep. 17 2013, 12:58 ET)
Remington 22, mod 550-1  (Started: Sep. 16 2013, 19:54 ET, Last post: Sep. 17 2013, 07:31 ET)
Safety
Ruger vaquero  (Started: Sep. 16 2013, 21:00 ET, Last post: Sep. 17 2013, 02:10 ET)
Anyone know about vaquero's??
Cutting dovetails inside & outside  (Started: Sep. 5 2013, 19:39 ET, Last post: Sep. 12 2013, 19:18 ET)
Any charts with dimensions?
Cooey 22lr barrel steel  (Started: Sep. 12 2013, 05:11 ET, Last post: Sep. 12 2013, 18:18 ET)
Request information on barrel steel
What do you use to figure a cartridge dimension  (Started: Sep. 5 2013, 09:38 ET, Last post: Sep. 8 2013, 23:14 ET)
What measuring tools
20 ga. single shot shotgun  (Started: Aug. 20 2013, 06:26 ET, Last post: Sep. 5 2013, 05:08 ET)
Make it legal
Need stock and forend plans  (Started: Aug. 17 2013, 11:14 ET, Last post: Aug. 27 2013, 11:51 ET)
Remington #1 rolling block
Cz-527 question  (Started: Aug. 8 2013, 12:47 ET, Last post: Aug. 26 2013, 08:38 ET)
Two questions actually
Rifle grenade  (Started: Jul. 28 2013, 22:42 ET, Last post: Aug. 26 2013, 03:51 ET)
Any one made any ?
Ak47 variants (parts).  (Started: Aug. 21 2013, 18:46 ET, Last post: Aug. 23 2013, 08:17 ET)
Brass guns  (Started: Aug. 11 2012, 02:29 ET, Last post: Aug. 21 2013, 20:44 ET)
What type
Shell holder  (Started: Aug. 20 2013, 15:45 ET, Last post: Aug. 21 2013, 09:45 ET)
338 lapua build  (Started: Aug. 13 2013, 09:34 ET, Last post: Aug. 17 2013, 07:50 ET)
Browning bar semi-auto rifle  (Started: Aug. 13 2013, 07:17 ET, Last post: Aug. 16 2013, 16:06 ET)
Need help finding part
Hollenbeck s x s shotgun  (Started: Aug. 16 2013, 12:22 ET, Last post: Aug. 16 2013, 12:22 ET)
Remington model 12  (Started: Aug. 5 2013, 09:39 ET, Last post: Aug. 16 2013, 12:19 ET)
Rotating dovetail magazine band
Single shot .223 pistol drawings  (Started: Jul. 4 2013, 01:30 ET, Last post: Aug. 4 2013, 15:05 ET)
Single shot pistol design for comment
1022 extractor  (Started: Aug. 2 2013, 01:42 ET, Last post: Aug. 3 2013, 22:50 ET)
Scratch building an extractor
Home-built revolvers  (Started: May 20 2008, 04:54 ET, Last post: Aug. 1 2013, 22:53 ET)
Why don't we see more of those?
Blowback 22 pistol conversion kit bolt weight  (Started: Jul. 21 2013, 13:25 ET, Last post: Jul. 24 2013, 13:46 ET)
Rising block design?  (Started: Jul. 21 2013, 14:48 ET, Last post: Jul. 22 2013, 01:25 ET)
Does this exist?
Nickel plating  (Started: Jul. 7 2013, 12:02 ET, Last post: Jul. 13 2013, 19:39 ET)
Trapdoor questions  (Started: Jun. 20 2013, 00:45 ET, Last post: Jun. 23 2013, 22:06 ET)
Newb ???
Sako action h&r barrel!!  (Started: Jun. 17 2013, 18:55 ET, Last post: Jun. 19 2013, 10:19 ET)
Sako l61r action with h&r barrel
Rem. rolling block strength  (Started: Jun. 12 2013, 11:46 ET, Last post: Jun. 15 2013, 15:25 ET)
Rebarrel or display piece?
Mac-10 type weapon accesories  (Started: Jun. 12 2013, 13:46 ET, Last post: Jun. 14 2013, 13:27 ET)
17-4 for making gun parts  (Started: Jun. 7 2013, 15:42 ET, Last post: Jun. 13 2013, 22:10 ET)
Link to man making a revolver cylinder
Indexable turning tool holders  (Started: Jun. 12 2013, 13:42 ET, Last post: Jun. 12 2013, 21:23 ET)
Springfield 1903 mark1  (Started: Jun. 11 2013, 09:53 ET, Last post: Jun. 12 2013, 04:26 ET)
Seeking for barrel standards threading
Stevens crack shot 26 problem  (Started: Jun. 7 2013, 14:15 ET, Last post: Jun. 8 2013, 00:50 ET)
Trying to fix something not broken ??
Lathe belt question  (Started: May 25 2013, 19:53 ET, Last post: Jun. 3 2013, 09:44 ET)
Gluing a lathe belt  (Started: May 31 2013, 15:45 ET, Last post: Jun. 1 2013, 11:11 ET)
Lathe advise needed
Tek22  (Started: May 23 2013, 16:43 ET, Last post: May 30 2013, 13:26 ET)
Failure to eject
Winchester 94  (Started: May 28 2013, 21:54 ET, Last post: May 29 2013, 09:45 ET)
Pre/post 64 differances
H&r model 700 .22 mag rifle problem  (Started: May 21 2013, 21:19 ET, Last post: May 22 2013, 12:26 ET)
Anyone here worked on one?
Powder trickler  (Started: May 4 2013, 15:34 ET, Last post: May 18 2013, 12:07 ET)
Unbalanced rifle  (Started: May 12 2013, 10:26 ET, Last post: May 12 2013, 23:28 ET)
Shotgun news 9mm  (Started: Apr. 29 2013, 19:33 ET, Last post: May 4 2013, 22:48 ET)
Crack shot 26  (Started: May 3 2013, 01:13 ET, Last post: May 3 2013, 23:46 ET)
Breech block problem ??
Metal advise needed  (Started: Apr. 3 2013, 17:11 ET, Last post: Apr. 28 2013, 15:40 ET)
Looking for the meatl experts
Building a sarco p12 double stack 1911  (Started: Apr. 24 2013, 08:40 ET, Last post: Apr. 24 2013, 19:49 ET)
Problem where round makes 90
Weatherby mark v bolt assembly  (Started: Apr. 20 2013, 14:05 ET, Last post: Apr. 20 2013, 16:34 ET)
Norinco 22 atd  (Started: Apr. 19 2013, 17:55 ET, Last post: Apr. 19 2013, 18:21 ET)
Feeding problem
9mm chamber dimension  (Started: Apr. 15 2013, 19:09 ET, Last post: Apr. 16 2013, 16:13 ET)
Possible typo error?
Ruger 22/45 receiver base  (Started: Apr. 15 2013, 15:03 ET, Last post: Apr. 16 2013, 01:36 ET)
Hole spacing for optic base
Scope mounts  (Started: Sep. 6 2012, 13:59 ET, Last post: Apr. 13 2013, 15:23 ET)
Mounts for a pre war model 70
Mossberg model †42 bolt disassembly  (Started: Apr. 13 2013, 13:03 ET, Last post: Apr. 13 2013, 13:03 ET)
Bolt help please
Barrel question now  (Started: Apr. 7 2013, 18:50 ET, Last post: Apr. 12 2013, 14:22 ET)
Scope questions  (Started: Apr. 6 2013, 18:54 ET, Last post: Apr. 11 2013, 22:28 ET)
Like metals - galling  (Started: Apr. 3 2013, 18:54 ET, Last post: Apr. 5 2013, 18:40 ET)
Falling block question  (Started: Feb. 12 2013, 07:34 ET, Last post: Apr. 5 2013, 11:46 ET)
Amt backup  (Started: Apr. 3 2013, 16:58 ET, Last post: Apr. 5 2013, 11:09 ET)
Extractor
Question about pressure  (Started: Mar. 25 2013, 10:01 ET, Last post: Mar. 25 2013, 20:03 ET)
Trigger geometry  (Started: Mar. 25 2013, 15:33 ET, Last post: Mar. 25 2013, 18:59 ET)
Underhammer build question
Cutting cylinder recess for moon clips  (Started: Feb. 22 2013, 23:21 ET, Last post: Mar. 23 2013, 23:21 ET)
Need to turn s&w 640 cylinder
Proof testing questions  (Started: Mar. 20 2013, 23:26 ET, Last post: Mar. 22 2013, 14:08 ET)
Testing guns
Sears .410 gauge bolt action extraction problem  (Started: Mar. 20 2013, 21:52 ET, Last post: Mar. 21 2013, 04:12 ET)
Extraction †problems
I'm thinking of buying a pellet rifle  (Started: Mar. 11 2013, 19:52 ET, Last post: Mar. 19 2013, 11:49 ET)
.177 or .22?
Browning bar  (Started: Mar. 12 2013, 09:00 ET, Last post: Mar. 18 2013, 13:04 ET)
Short cycling
Design questions; gas operated semi rifles  (Started: Mar. 5 2013, 18:50 ET, Last post: Mar. 7 2013, 22:26 ET)
Combining my questions into one thread
500 s&w barrel uses?  (Started: Mar. 3 2013, 19:36 ET, Last post: Mar. 5 2013, 22:04 ET)
Design of rimfire firing pin  (Started: Feb. 9 2013, 19:37 ET, Last post: Mar. 4 2013, 20:45 ET)
Dry firing
Beaumont question  (Started: Feb. 17 2013, 20:52 ET, Last post: Feb. 27 2013, 10:40 ET)
Marlin model 56  (Started: Feb. 26 2013, 16:11 ET, Last post: Feb. 26 2013, 16:11 ET)
Trigger/sear spring
Would like my donation back  (Started: Feb. 4 2013, 18:46 ET, Last post: Feb. 24 2013, 22:11 ET)
Would like my donation back
Mystry part  (Started: Feb. 19 2013, 09:55 ET, Last post: Feb. 23 2013, 22:04 ET)
What it is????
Rolling block barrel  (Started: Feb. 17 2013, 14:04 ET, Last post: Feb. 19 2013, 11:42 ET)
Spanish 43 to 357 mag
Chinese sks  (Started: Feb. 4 2013, 15:03 ET, Last post: Feb. 18 2013, 19:24 ET)
Trigger bar
Stock repair x bolt  (Started: Feb. 17 2013, 23:30 ET, Last post: Feb. 17 2013, 23:30 ET)
Finish
Quiet guns  (Started: Feb. 14 2013, 00:18 ET, Last post: Feb. 17 2013, 17:10 ET)
Fn  belgium  98 mauser 7mm  (Started: Feb. 16 2013, 23:58 ET, Last post: Feb. 17 2013, 03:39 ET)
Safe
Question from a friend from a sherif department in  (Started: Feb. 10 2013, 14:04 ET, Last post: Feb. 16 2013, 11:17 ET)
.410/.45 lc chamber  (Started: Feb. 5 2013, 16:15 ET, Last post: Feb. 12 2013, 17:18 ET)
22 magazine tube  (Started: Feb. 9 2013, 15:40 ET, Last post: Feb. 9 2013, 18:35 ET)
Dimensions
Trigger to firing pin connection  (Started: Feb. 7 2013, 16:08 ET, Last post: Feb. 8 2013, 04:16 ET)
Looking for some explinations
Remington 700 bdl bottom metal  (Started: Feb. 6 2013, 11:06 ET, Last post: Feb. 7 2013, 06:35 ET)
Cad drawings needed
Please help identify frame  (Started: Feb. 1 2013, 15:25 ET, Last post: Feb. 6 2013, 23:23 ET)
Maybe rem 6 boy's rifle
Need help finding a patent  (Started: Feb. 3 2013, 13:20 ET, Last post: Feb. 4 2013, 13:26 ET)
Heym sr30
Barrel blank question  (Started: Feb. 2 2013, 17:33 ET, Last post: Feb. 3 2013, 17:38 ET)
Cz 550 threads  (Started: Dec. 31 2012, 18:37 ET, Last post: Feb. 3 2013, 11:30 ET)
Short barreled shotguns and barrel fluting?  (Started: Feb. 1 2013, 01:38 ET, Last post: Feb. 1 2013, 19:48 ET)
Fluting the proper way, how does it help
Ar 15 gas rings  (Started: Jan. 28 2013, 18:32 ET, Last post: Jan. 28 2013, 22:28 ET)
Alternatives to typical gas rings
1895 straight pull steyr rifle.  (Started: Aug. 19 2012, 23:16 ET, Last post: Jan. 25 2013, 18:39 ET)
1895 straight pull steyr rifle.
H & r 622 revolver  (Started: Jan. 15 2013, 12:19 ET, Last post: Jan. 25 2013, 11:43 ET)
Center pin
Ar-15 upper forging.  (Started: Jan. 22 2013, 23:49 ET, Last post: Jan. 24 2013, 09:51 ET)
Ar handguards at home?  (Started: Jan. 21 2013, 15:21 ET, Last post: Jan. 23 2013, 21:26 ET)
Handguards at home
17 hmr  (Started: Jan. 17 2013, 15:05 ET, Last post: Jan. 23 2013, 17:42 ET)
Overpressure ?
Left handed 1911 slide?  (Started: Jan. 22 2013, 18:16 ET, Last post: Jan. 22 2013, 22:47 ET)
50 american eagle cartridge  (Started: Jan. 22 2013, 18:30 ET, Last post: Jan. 22 2013, 18:30 ET)
Reloading information request
Reloading with the 'wrong' dies?  (Started: Jan. 19 2013, 15:13 ET, Last post: Jan. 21 2013, 15:35 ET)
Fluting rifle barrel  (Started: Jan. 17 2013, 08:30 ET, Last post: Jan. 20 2013, 09:49 ET)
Machinist  (Started: Jan. 15 2013, 21:02 ET, Last post: Jan. 19 2013, 21:22 ET)
Sks single shot  (Started: Dec. 29 2012, 17:39 ET, Last post: Jan. 18 2013, 01:08 ET)
.357 project  (Started: Jan. 13 2013, 08:53 ET, Last post: Jan. 17 2013, 20:30 ET)
I need a machinist  (Started: Jan. 9 2013, 23:25 ET, Last post: Jan. 15 2013, 17:37 ET)
How to shim a scope  (Started: Jan. 5 2013, 18:38 ET, Last post: Jan. 5 2013, 21:15 ET)
Ak receiver welding question  (Started: Dec. 20 2012, 20:29 ET, Last post: Jan. 5 2013, 17:04 ET)
Steel shot in older guns  (Started: Jan. 1 2013, 14:33 ET, Last post: Jan. 2 2013, 22:39 ET)
Beretta silverhawk w/chromemoly barrels
Single shot .223 pistol plan for criticism  (Started: Dec. 30 2012, 16:21 ET, Last post: Dec. 31 2012, 21:53 ET)
My basic plan for .223 pistol
Smiths for barrel fluting in portland, or area?  (Started: Dec. 25 2012, 21:57 ET, Last post: Dec. 30 2012, 21:29 ET)
Looking for gunsmiths in pdx
Winchester model 94 feed problems...  (Started: Dec. 15 2012, 13:55 ET, Last post: Dec. 26 2012, 21:37 ET)
Extractor for a raptor rifle  (Started: Dec. 20 2012, 22:56 ET, Last post: Dec. 21 2012, 15:20 ET)
New member needs help to finish a project  (Started: Nov. 24 2012, 16:07 ET, Last post: Dec. 20 2012, 21:59 ET)
Help on wood finishing
Remington 510 targetmaster  (Started: Dec. 17 2012, 21:52 ET, Last post: Dec. 19 2012, 14:11 ET)
Ressembly help
Golani sporter in .223  (Started: Nov. 19 2012, 17:18 ET, Last post: Dec. 13 2012, 16:04 ET)
Folding stock
H&r cylinder  (Started: Dec. 8 2012, 18:08 ET, Last post: Dec. 8 2012, 18:08 ET)
Compatable models
.410 derringer design  (Started: Nov. 27 2012, 04:16 ET, Last post: Dec. 7 2012, 15:36 ET)
Trigger geometry, .410 chamber thickness
Underhammer nipple location  (Started: Dec. 5 2012, 09:37 ET, Last post: Dec. 6 2012, 16:06 ET)
Winchester mod 50 magazine tube  (Started: Nov. 27 2012, 20:23 ET, Last post: Nov. 28 2012, 22:00 ET)
What angle on the receiver grooves to accept  (Started: Nov. 25 2012, 14:49 ET, Last post: Nov. 28 2012, 10:51 ET)
A scope mount, 60* or 62*??
Svt 40 muzzle brake thread count.  (Started: Jun. 14 2012, 02:54 ET, Last post: Nov. 25 2012, 20:59 ET)
Help please  (Started: Nov. 21 2012, 20:12 ET, Last post: Nov. 24 2012, 19:17 ET)
D/t bushing size
H&r revolver  (Started: Nov. 20 2012, 22:03 ET, Last post: Nov. 21 2012, 20:32 ET)
Need cylinder
Tt-olympia pistol barrel-removal problem  (Started: Nov. 6 2012, 12:11 ET, Last post: Nov. 19 2012, 23:31 ET)
Barrel stuck mid way
Feeding problem /winchester 1894  (Started: Nov. 11 2012, 09:47 ET, Last post: Nov. 13 2012, 10:17 ET)
Winchester 54  (Started: Nov. 11 2012, 21:06 ET, Last post: Nov. 12 2012, 19:55 ET)
Model 70 barrel fit 54?
Dehaas fm no. 2 vault lock  (Started: Nov. 7 2012, 00:26 ET, Last post: Nov. 9 2012, 19:21 ET)
Help a confused machinist
Twist rate calculator  (Started: Oct. 19 2012, 15:47 ET, Last post: Nov. 1 2012, 15:16 ET)
How slow it wants ?
Old mossberg 500c 20 ga, can you mod the tub mag  (Started: Oct. 11 2012, 13:51 ET, Last post: Oct. 30 2012, 11:06 ET)
To accept more than 2 shells???
Where can i fined parts for this revolver  (Started: Oct. 23 2012, 19:57 ET, Last post: Oct. 30 2012, 07:10 ET)
What type of steel is this  (Started: Oct. 28 2012, 10:51 ET, Last post: Oct. 29 2012, 22:33 ET)
Need to find an american tool steel
Nickel finish  (Started: Oct. 26 2012, 18:32 ET, Last post: Oct. 28 2012, 12:41 ET)
Smith & wesson victory revolver
Hawes saa .357 cylinder needed  (Started: Sep. 27 2012, 04:04 ET, Last post: Oct. 24 2012, 23:24 ET)
Squires bingham 20p  (Started: Oct. 16 2012, 19:50 ET, Last post: Oct. 18 2012, 23:03 ET)
'cousin' magazines. . .
Smallest bang for my buck  (Started: Oct. 16 2012, 17:51 ET, Last post: Oct. 17 2012, 18:13 ET)
Who makes a good can?
M44 bayonet mount removal  (Started: Sep. 28 2012, 08:02 ET, Last post: Oct. 14 2012, 11:04 ET)
Off!  off i say!
Diy rechamber of .22lr to .223 ?  (Started: Oct. 9 2012, 03:46 ET, Last post: Oct. 13 2012, 16:24 ET)
.375 liberator ml  (Started: Oct. 11 2012, 13:00 ET, Last post: Oct. 13 2012, 14:42 ET)
Revelation 22 need help  (Started: Oct. 10 2012, 17:09 ET, Last post: Oct. 13 2012, 10:23 ET)
How to replace pin holding barrel?
Storm lake are they any good?  (Started: Sep. 17 2012, 02:45 ET, Last post: Oct. 12 2012, 23:14 ET)
Buying a threaded xd45 barrel
.50 bmg extractor issues  (Started: Oct. 7 2012, 19:49 ET, Last post: Oct. 8 2012, 20:22 ET)
Resetting trigger for blowback?  (Started: Sep. 3 2012, 00:52 ET, Last post: Oct. 8 2012, 14:56 ET)
Looking for ideas
Mystery rifle  (Started: Oct. 7 2012, 02:45 ET, Last post: Oct. 8 2012, 00:30 ET)
Software for measuring sound  (Started: Sep. 28 2012, 09:29 ET, Last post: Oct. 4 2012, 19:46 ET)
I need one
223 bullets tilts on short range?  (Started: Sep. 30 2012, 11:39 ET, Last post: Oct. 2 2012, 07:37 ET)
I am really puzzled
J.c. higgins model 66  (Started: Sep. 26 2012, 08:58 ET, Last post: Sep. 26 2012, 08:58 ET)
Cylinder valve
Loose forend on ithaca flues.  (Started: Sep. 18 2012, 00:05 ET, Last post: Sep. 24 2012, 18:45 ET)
Anybody done any die casting at home?  (Started: Aug. 31 2012, 11:39 ET, Last post: Sep. 24 2012, 15:41 ET)
Savage barrel threading  (Started: Sep. 10 2012, 19:32 ET, Last post: Sep. 21 2012, 19:10 ET)
Threading die for 1.05" x20 tpi thread
Welding mauser bolt handle  (Started: Sep. 8 2012, 18:24 ET, Last post: Sep. 17 2012, 21:05 ET)
Necessary to reharden cocking cam?
Historic bronzes,  (Started: Sep. 11 2012, 10:30 ET, Last post: Sep. 16 2012, 07:59 ET)
The old guns,
Bushmaster m17s  (Started: Sep. 9 2012, 14:43 ET, Last post: Sep. 12 2012, 21:51 ET)
Replacement barrel
Shotgun problems  (Started: Sep. 9 2012, 14:11 ET, Last post: Sep. 12 2012, 18:16 ET)
Replacing pistol sights  (Started: Sep. 11 2012, 13:57 ET, Last post: Sep. 11 2012, 15:21 ET)
Replacing pistol sights
Correcting leade error  (Started: Sep. 1 2012, 01:21 ET, Last post: Sep. 10 2012, 18:04 ET)
Throat reamer
Drilling for front ramp  (Started: Jul. 28 2012, 22:56 ET, Last post: Sep. 8 2012, 20:28 ET)
Safe drill depth
Lc smith 12 ga double outside hammers  (Started: Sep. 4 2012, 15:14 ET, Last post: Sep. 7 2012, 20:58 ET)
Hammer and firing pin
Metal cutting saw blades  (Started: Aug. 8 2012, 18:04 ET, Last post: Sep. 6 2012, 10:44 ET)
Hep me!!!
Fox model b .410 shotgun  (Started: Sep. 3 2012, 20:23 ET, Last post: Sep. 3 2012, 20:23 ET)
Extractors
Luger auto shotgun  (Started: Sep. 3 2012, 13:50 ET, Last post: Sep. 3 2012, 13:50 ET)
Manual and parts
Where can i get used karbide chamber reamers  (Started: Aug. 27 2012, 19:57 ET, Last post: Sep. 1 2012, 19:47 ET)
20ga. barrel  (Started: Aug. 23 2012, 11:24 ET, Last post: Aug. 31 2012, 17:33 ET)
Shotgun
Bolt weight for .32 acp blowback.  (Started: Jul. 27 2010, 17:40 ET, Last post: Aug. 27 2012, 09:57 ET)
Collecting data for future build.
Slide lightening  (Started: Aug. 12 2012, 18:58 ET, Last post: Aug. 25 2012, 21:49 ET)
Tools and tips
.22 lr dummy rounds.  (Started: Aug. 12 2012, 01:03 ET, Last post: Aug. 25 2012, 19:51 ET)
Make, or buy?
Trigger group  (Started: Aug. 21 2012, 14:56 ET, Last post: Aug. 21 2012, 23:48 ET)
Stock repair pin  (Started: Aug. 19 2012, 03:44 ET, Last post: Aug. 19 2012, 05:12 ET)
Tight going in
How hard is it to replace a barrel on a gun  (Started: Aug. 16 2012, 00:33 ET, Last post: Aug. 18 2012, 21:50 ET)
Switch my 45 to a screw end front barrel
M1 carbine got me pulling my hair out  (Started: Jul. 31 2012, 20:35 ET, Last post: Aug. 18 2012, 10:55 ET)
Colt army special  (Started: Aug. 16 2012, 00:23 ET, Last post: Aug. 16 2012, 00:23 ET)
1911 a1 beavertail  (Started: Aug. 10 2012, 21:37 ET, Last post: Aug. 13 2012, 12:03 ET)
Original hammer
Bying firearms from anonymous black market reload  (Started: Aug. 8 2012, 18:22 ET, Last post: Aug. 8 2012, 18:22 ET)
Drawing of target scope base  (Started: Aug. 7 2012, 00:18 ET, Last post: Aug. 8 2012, 01:17 ET)
Drawing of target scope base
Best gun finishes  (Started: Jul. 8 2012, 13:00 ET, Last post: Aug. 7 2012, 22:35 ET)
Duracoat, cerakoat, gunkote
Vintage redfield charts  (Started: Jul. 30 2012, 16:57 ET, Last post: Aug. 1 2012, 22:30 ET)
Rolling block  (Started: Jul. 22 2012, 19:00 ET, Last post: Jul. 29 2012, 21:30 ET)
Barrel
Where are the stress points?  (Started: Jul. 28 2012, 21:19 ET, Last post: Jul. 29 2012, 19:03 ET)
On a semi-auto pistol frame and slide
Sig 1911 slide/frame fit  (Started: Jun. 28 2012, 18:31 ET, Last post: Jul. 28 2012, 20:48 ET)
Is this normal for a slide/frame fit?
Walther p38  (Started: Jul. 24 2012, 18:37 ET, Last post: Jul. 25 2012, 09:11 ET)
Hammer drop safety lever
"really big" .308 caliber  (Started: Jul. 20 2012, 19:59 ET, Last post: Jul. 24 2012, 15:41 ET)
Which one?
The difference between uzi and sten magazines  (Started: Jul. 9 2012, 12:12 ET, Last post: Jul. 19 2012, 18:23 ET)
I'm not sure which to use
Remington rolling block 7mm  (Started: Jul. 10 2012, 21:46 ET, Last post: Jul. 18 2012, 22:52 ET)
Is it safe
Question about gun type is it legel in ala  (Started: Jul. 11 2012, 21:49 ET, Last post: Jul. 17 2012, 19:57 ET)
Tactical pistal
Winchester 1892 barrels?  (Started: Jul. 17 2012, 17:15 ET, Last post: Jul. 17 2012, 19:12 ET)
Trouble reassembling stevens m94 shotgun  (Started: Jul. 16 2012, 11:52 ET, Last post: Jul. 17 2012, 17:50 ET)
Source for 8620 steel bar stock  (Started: Jul. 11 2012, 03:52 ET, Last post: Jul. 15 2012, 10:43 ET)
Source for 8620 steel bar stock
Nef r73 parts  (Started: Jul. 9 2012, 14:57 ET, Last post: Jul. 9 2012, 14:57 ET)
Win m50  (Started: Jun. 30 2012, 18:11 ET, Last post: Jul. 6 2012, 23:05 ET)
Trigger issues
Remington rolling block  (Started: Jul. 1 2012, 22:01 ET, Last post: Jul. 5 2012, 18:46 ET)
32 rimfire to 32-20
Posting pics  (Started: Jun. 28 2012, 23:35 ET, Last post: Jun. 29 2012, 14:12 ET)
New smart phone
H&k style roller locked bolt  (Started: Apr. 12 2012, 11:52 ET, Last post: Jun. 29 2012, 12:16 ET)
Just a few questions on the design
Receiver thickness of scar or acr, or xcr  (Started: Jun. 27 2012, 04:57 ET, Last post: Jun. 27 2012, 04:57 ET)
Forster seater die question  (Started: Jun. 10 2012, 11:26 ET, Last post: Jun. 20 2012, 20:05 ET)
Sniper scope 24x50  (Started: Jun. 10 2012, 18:39 ET, Last post: Jun. 18 2012, 13:54 ET)
Do you know any thing about it?
Mossberg 385t 20 ga.  (Started: Jun. 13 2012, 15:40 ET, Last post: Jun. 14 2012, 08:07 ET)
Feeding issues
Anyone know anything about this handgun  (Started: May 27 2012, 17:19 ET, Last post: Jun. 12 2012, 05:55 ET)
Materials for bolt carrier  (Started: Jun. 3 2012, 04:15 ET, Last post: Jun. 10 2012, 16:22 ET)
Need help choosing a material to use
Music wire  (Started: Jun. 4 2012, 10:49 ET, Last post: Jun. 10 2012, 12:21 ET)
What diameters should i buy?
A question from albania  (Started: Jun. 6 2012, 15:27 ET, Last post: Jun. 7 2012, 23:49 ET)
Walther p38  (Started: Jun. 7 2012, 13:53 ET, Last post: Jun. 7 2012, 13:53 ET)
Hammer drop not working
Help with older bar  (Started: May 28 2012, 23:17 ET, Last post: May 31 2012, 22:40 ET)
Clocking in for threading and chambering  (Started: May 29 2012, 08:27 ET, Last post: May 30 2012, 03:17 ET)
Chambering and threading barrels
Using aluminium for smg builds  (Started: May 22 2012, 18:02 ET, Last post: May 25 2012, 19:21 ET)
Any reasons not to use alu?
Rossi 971  (Started: May 22 2012, 22:23 ET, Last post: May 23 2012, 00:00 ET)
Finicky trigger reset
Inspiration for a first build  (Started: May 11 2012, 20:48 ET, Last post: May 18 2012, 16:35 ET)
Toten kopf "wts ak-47 type rifle build cd"  (Started: May 4 2012, 19:41 ET, Last post: May 18 2012, 15:43 ET)
Can i find it/him here ?
Spacing between parts question  (Started: May 6 2012, 16:56 ET, Last post: May 17 2012, 17:35 ET)
Lookin for a good distance between parts
Ruger mk build  (Started: May 15 2012, 22:26 ET, Last post: May 16 2012, 09:42 ET)
Stevens crackshot  (Started: Apr. 26 2011, 19:11 ET, Last post: May 9 2012, 15:44 ET)
Altering a remington 700 bolt to use savage bolt f  (Started: May 7 2012, 09:55 ET, Last post: May 7 2012, 19:57 ET)
Mini mauser  (Started: Apr. 29 2012, 09:47 ET, Last post: May 4 2012, 01:01 ET)
Question on locked and unlocked bolt design  (Started: Apr. 29 2012, 14:23 ET, Last post: May 3 2012, 04:19 ET)
Need help on a design i'm working on
Ruger 10 22 magazine  (Started: Apr. 30 2012, 20:13 ET, Last post: Apr. 30 2012, 22:50 ET)
What are the dimensions?
Satin finish  (Started: Apr. 29 2012, 15:08 ET, Last post: Apr. 29 2012, 16:42 ET)
Remove satin finish
Pondering a biuld  (Started: Apr. 25 2012, 14:16 ET, Last post: Apr. 25 2012, 23:24 ET)
Lock disassemly tutorial video  (Started: Apr. 23 2012, 18:10 ET, Last post: Apr. 23 2012, 18:10 ET)
This is an answer not a question
S&w x frame rear sight dimensions  (Started: Apr. 22 2012, 23:03 ET, Last post: Apr. 22 2012, 23:03 ET)
How would you secure this 9mm magazine  (Started: Apr. 16 2012, 22:19 ET, Last post: Apr. 22 2012, 21:06 ET)
Tube gun
Need dimensions for a match reamer, 22 semi-a  (Started: Apr. 22 2012, 07:52 ET, Last post: Apr. 22 2012, 17:55 ET)
Like a bentz chamber
Fn baby browning bauer blueprint  (Started: Apr. 17 2012, 21:13 ET, Last post: Apr. 22 2012, 16:10 ET)
Help!?
Iver johnson 66  (Started: Apr. 17 2012, 20:09 ET, Last post: Apr. 18 2012, 22:55 ET)
Rechambering 8mm mauser to 8mm06ai - simple?  (Started: Sep. 10 2011, 12:40 ET, Last post: Apr. 17 2012, 20:29 ET)
.30 carbine blowback bolt weight  (Started: Sep. 25 2011, 14:23 ET, Last post: Apr. 17 2012, 17:16 ET)
Beefing up a skinny barrel  (Started: Apr. 13 2012, 22:20 ET, Last post: Apr. 17 2012, 16:58 ET)
Key chain gun in 32  (Started: Nov. 3 2010, 17:22 ET, Last post: Apr. 17 2012, 16:29 ET)
Cool
Sbr require parts count?  (Started: Apr. 15 2012, 16:58 ET, Last post: Apr. 17 2012, 00:48 ET)
Fiberglass frames  (Started: Apr. 7 2012, 23:39 ET, Last post: Apr. 16 2012, 11:05 ET)
Possible ?
22 lr target pistol  (Started: Apr. 11 2012, 08:50 ET, Last post: Apr. 12 2012, 23:17 ET)
Twist rate,
Need rear sight for nylon 66  (Started: Apr. 10 2012, 00:01 ET, Last post: Apr. 12 2012, 19:32 ET)
Which magazine to use?  (Started: Apr. 2 2012, 19:33 ET, Last post: Apr. 10 2012, 20:44 ET)
Fal or cetme
Cylinder binding!  (Started: Feb. 13 2012, 10:24 ET, Last post: Apr. 10 2012, 00:21 ET)
I got two 1919a4 barrels  (Started: Apr. 7 2012, 16:02 ET, Last post: Apr. 9 2012, 12:54 ET)
What would you do with them
Where to get .22magazine for 1911 conversion?  (Started: Feb. 23 2012, 11:13 ET, Last post: Apr. 9 2012, 00:02 ET)
#4 rolling block  (Started: Apr. 2 2012, 08:40 ET, Last post: Apr. 8 2012, 16:51 ET)
Parts for laseraim 45 cal  (Started: Mar. 30 2012, 17:45 ET, Last post: Apr. 2 2012, 17:22 ET)
Recommendation on gearbox oil?  (Started: Mar. 30 2012, 08:28 ET, Last post: Apr. 2 2012, 08:20 ET)
Ar-7 survival rifle  (Started: Mar. 27 2012, 14:01 ET, Last post: Mar. 28 2012, 22:09 ET)
Anyone built one?
Best way to quench a receiver  (Started: Mar. 12 2012, 18:08 ET, Last post: Mar. 26 2012, 22:31 ET)
Which end first or does it matter
Cut rifling or button rifling?  (Started: Mar. 22 2012, 21:49 ET, Last post: Mar. 24 2012, 13:06 ET)
Trying an experiment
32-20 best modern action ?  (Started: Mar. 5 2012, 02:22 ET, Last post: Mar. 22 2012, 23:51 ET)
What modern bolt action to re barrel
Remington 700 action lugs  (Started: Mar. 15 2012, 00:13 ET, Last post: Mar. 22 2012, 18:05 ET)
Need firing pin for 1917 colt.  (Started: Mar. 11 2012, 23:29 ET, Last post: Mar. 20 2012, 22:47 ET)
New source for pre-hard steel  (Started: Mar. 14 2012, 16:08 ET, Last post: Mar. 20 2012, 21:48 ET)
What do you think
Wait for a marlin papoose, or make one from 795?  (Started: Mar. 8 2012, 21:53 ET, Last post: Mar. 19 2012, 18:56 ET)
Milling a stripper clip slot  (Started: Feb. 27 2012, 15:30 ET, Last post: Mar. 18 2012, 13:17 ET)
Remington 700 stripper clip slot
Stock for an ishapore enfield  (Started: Mar. 15 2012, 15:17 ET, Last post: Mar. 16 2012, 07:09 ET)
What to use?
Action threads  (Started: Feb. 22 2012, 22:04 ET, Last post: Mar. 8 2012, 06:32 ET)
Action threads
H & r 923  (Started: Mar. 5 2012, 11:47 ET, Last post: Mar. 7 2012, 15:18 ET)
End shake
Rechambering from .30 remington  (Started: Feb. 25 2012, 14:39 ET, Last post: Mar. 4 2012, 22:01 ET)
Modernizing obsolescence
Inspect a barrel blank before machining  (Started: Mar. 1 2012, 03:35 ET, Last post: Mar. 4 2012, 09:57 ET)
Fitting colt gold cup barrel  (Started: Feb. 5 2012, 22:39 ET, Last post: Mar. 3 2012, 08:07 ET)
Colt gold cup barrel fitting
Remington model 66 (nylon 66) questions  (Started: Feb. 27 2012, 19:26 ET, Last post: Feb. 29 2012, 11:41 ET)
Iso info on the nylon 66 .22 rifle
Anyone ever made a gun drill?  (Started: Apr. 5 2011, 14:52 ET, Last post: Feb. 27 2012, 08:56 ET)
For relining a .22
Mossberg 85d  (Started: Feb. 22 2012, 19:20 ET, Last post: Feb. 24 2012, 20:19 ET)
Throating a .22lr revolver barrel  (Started: Feb. 16 2012, 11:51 ET, Last post: Feb. 19 2012, 19:08 ET)
Necessary?
Para-ordnance wide body 1911 45acp  (Started: Feb. 17 2012, 11:56 ET, Last post: Feb. 17 2012, 21:36 ET)
Home made scope  (Started: Feb. 13 2012, 21:57 ET, Last post: Feb. 17 2012, 13:47 ET)
Replacement ruger mk ii sear assembly  (Started: Feb. 1 2012, 17:18 ET, Last post: Feb. 14 2012, 01:20 ET)
Ruger will not ship them directly
Walther p38 (39n)  (Started: Feb. 8 2012, 23:58 ET, Last post: Feb. 11 2012, 10:53 ET)
Full auto.
Bottom metal?  (Started: Feb. 5 2012, 18:29 ET, Last post: Feb. 5 2012, 18:29 ET)
Enfield?  (Started: Feb. 4 2012, 22:51 ET, Last post: Feb. 5 2012, 18:25 ET)
Remington 788 cracked bolt shroud  (Started: Jan. 16 2012, 11:47 ET, Last post: Feb. 2 2012, 17:39 ET)
Looking for cause
Mcmurran style rifling machine drum size question  (Started: Jan. 31 2012, 21:29 ET, Last post: Feb. 2 2012, 09:08 ET)
Welding of lug on contender barrel  (Started: Jan. 25 2012, 01:21 ET, Last post: Feb. 1 2012, 15:15 ET)
Welding  contender barrel
Cz 52 rebarrel to 9mm luger  (Started: Jan. 28 2012, 06:07 ET, Last post: Feb. 1 2012, 14:49 ET)
Need breech wall thickness data of .410 shotgun  (Started: Jan. 23 2012, 06:17 ET, Last post: Feb. 1 2012, 11:51 ET)
Measure your guns breech walls, please
Ak build without removing the barrel.  (Started: Jan. 26 2012, 00:10 ET, Last post: Feb. 1 2012, 10:29 ET)
Sharps borchardt castings  (Started: Jan. 29 2012, 16:03 ET, Last post: Jan. 31 2012, 18:24 ET)
Help
Mossberg 500 heat shield  (Started: Jan. 30 2012, 10:20 ET, Last post: Jan. 30 2012, 10:20 ET)
Scope recommendations  (Started: Jan. 27 2012, 11:32 ET, Last post: Jan. 29 2012, 14:08 ET)
Ar15  (Started: Dec. 16 2011, 12:36 ET, Last post: Jan. 29 2012, 12:23 ET)
Mag extension  (Started: Jan. 27 2012, 19:10 ET, Last post: Jan. 27 2012, 19:10 ET)
Super x2
Blow back  (Started: Jan. 15 2012, 23:09 ET, Last post: Jan. 25 2012, 21:18 ET)
Blow back info
Colt police positive special  (Started: Jan. 25 2012, 16:26 ET, Last post: Jan. 25 2012, 21:14 ET)
32 np ctg
Huh?  (Started: Jan. 24 2012, 13:29 ET, Last post: Jan. 25 2012, 13:29 ET)
Favorite
Mauser conversion  (Started: Jan. 6 2012, 10:06 ET, Last post: Jan. 24 2012, 15:27 ET)
Convert to 30-06
Harrington & richardson 32 s&w  (Started: Jan. 20 2012, 15:28 ET, Last post: Jan. 22 2012, 09:38 ET)
What model do i have
Anybody recognize this side lever double shotgun?  (Started: Jan. 20 2012, 12:12 ET, Last post: Jan. 21 2012, 11:45 ET)
Looks neat anyway
Ques.about colt police positive  (Started: Jan. 20 2012, 12:59 ET, Last post: Jan. 21 2012, 09:19 ET)
Lathe  (Started: Jan. 15 2012, 19:23 ET, Last post: Jan. 20 2012, 22:47 ET)
Which brands are better
Barrel thread size  (Started: Jan. 18 2012, 16:33 ET, Last post: Jan. 20 2012, 18:12 ET)
1894 and 1885 win.
Lefver nitro  (Started: Jan. 18 2012, 18:03 ET, Last post: Jan. 19 2012, 14:28 ET)
Main springs!!
Rohm rg14s  (Started: Jan. 17 2012, 17:03 ET, Last post: Jan. 18 2012, 11:26 ET)
Transfer bar spring
Revalation model 115  (Started: Jan. 17 2012, 15:12 ET, Last post: Jan. 18 2012, 11:24 ET)
Bolt flops around in receiver.
Frozen screw  (Started: Jan. 15 2012, 11:50 ET, Last post: Jan. 16 2012, 20:54 ET)
Remove rusted screw
Drilling and taaping for scope mounts  (Started: Jan. 13 2012, 22:00 ET, Last post: Jan. 14 2012, 23:09 ET)
Demand for this service
Drilling and reaming for liner  (Started: Jan. 10 2012, 09:21 ET, Last post: Jan. 14 2012, 22:19 ET)
Aics bottom metal  (Started: Jan. 11 2012, 08:40 ET, Last post: Jan. 11 2012, 13:31 ET)
Dimensions/prints/anything
Short barreling a saiga .308  (Started: Dec. 29 2011, 04:47 ET, Last post: Jan. 9 2012, 20:25 ET)
Mosin query  (Started: Dec. 31 2011, 13:03 ET, Last post: Jan. 6 2012, 13:32 ET)
Need sketch or print  (Started: Jan. 2 2012, 13:39 ET, Last post: Jan. 3 2012, 15:45 ET)
Rotating firing pin
Completely ot...but thought i'd ask anyways...  (Started: Jan. 1 2012, 10:37 ET, Last post: Jan. 1 2012, 17:36 ET)
45 acp bolt rifle  (Started: Jul. 20 2009, 16:32 ET, Last post: Dec. 30 2011, 20:01 ET)
Building a light bolt rifle in .45 acp
Just curious - replacement barrel only option?  (Started: Dec. 30 2011, 01:18 ET, Last post: Dec. 30 2011, 14:14 ET)
Need help identifying this pistol  (Started: Dec. 25 2011, 12:56 ET, Last post: Dec. 28 2011, 23:56 ET)
M1 garand gas cylinder lock  (Started: Dec. 23 2011, 20:33 ET, Last post: Dec. 23 2011, 20:33 ET)
Clocking issue
Cannot find a ,barrel fitting formula  (Started: Dec. 22 2011, 17:02 ET, Last post: Dec. 23 2011, 13:48 ET)
Fitting barrels
Romy rpk build  (Started: Dec. 21 2011, 13:52 ET, Last post: Dec. 21 2011, 21:27 ET)
Been putting it off
Remington 700 barrel  (Started: Dec. 18 2011, 13:18 ET, Last post: Dec. 21 2011, 10:28 ET)
Number 4 rolling block reface  (Started: Dec. 14 2011, 09:03 ET, Last post: Dec. 20 2011, 15:46 ET)
Best hunting conversion - enfield or mauser?  (Started: Dec. 12 2011, 21:43 ET, Last post: Dec. 19 2011, 12:50 ET)
Need prints  (Started: Nov. 11 2011, 17:32 ET, Last post: Dec. 18 2011, 19:45 ET)
Suomi kp-44
Ss actions  (Started: Dec. 1 2011, 11:27 ET, Last post: Dec. 17 2011, 21:30 ET)
Identify these falling blocks
Frame pivot pin  (Started: Dec. 16 2011, 19:17 ET, Last post: Dec. 17 2011, 17:43 ET)
Shotgun
Tc encore .240 weatherby  (Started: Dec. 16 2011, 21:34 ET, Last post: Dec. 16 2011, 21:34 ET)
Single trigger mechanism for 2 barreled pistol  (Started: Dec. 15 2011, 11:06 ET, Last post: Dec. 15 2011, 22:28 ET)
Looking for patents, plans, ideas
F99 contour?  (Started: Dec. 15 2011, 13:15 ET, Last post: Dec. 15 2011, 14:33 ET)
Stoeger 12 ga auto model luger  (Started: Dec. 5 2011, 16:33 ET, Last post: Dec. 15 2011, 11:00 ET)
Schematic
Fitment  (Started: Dec. 14 2011, 07:33 ET, Last post: Dec. 15 2011, 10:15 ET)
Method of attachment
At my wits end...  (Started: Dec. 6 2011, 23:54 ET, Last post: Dec. 14 2011, 21:06 ET)
Help me find a part
Winchester 1200 / 1300  (Started: Nov. 28 2011, 11:06 ET, Last post: Dec. 14 2011, 00:50 ET)
Need info on firing pin
Questions regarding ak improvement  (Started: Dec. 11 2011, 09:55 ET, Last post: Dec. 12 2011, 22:05 ET)
Fitting link pin  (Started: Dec. 9 2011, 21:56 ET, Last post: Dec. 12 2011, 14:48 ET)
Vz-24 mauser  (Started: Dec. 10 2011, 16:45 ET, Last post: Dec. 11 2011, 01:37 ET)
Parts needed
Sig sauer p228 project  (Started: Nov. 27 2011, 09:32 ET, Last post: Dec. 5 2011, 21:17 ET)
Some drawings needed
.357 mag chamber  (Started: Dec. 4 2011, 16:07 ET, Last post: Dec. 5 2011, 19:14 ET)
Gold-spot 22lr Silencer  (Started: Sep. 17 2004, 21:50 ET, Last post: Dec. 1 2011, 13:11 ET)
Information needed
Super colibri  (Started: Jun. 3 2011, 19:06 ET, Last post: Dec. 1 2011, 11:20 ET)
22lr semi auto cycle
Air rifle repair manual  (Started: May 21 2004, 20:38 ET, Last post: Nov. 30 2011, 22:46 ET)
Thoughts on diy injection molding plastics.  (Started: Jun. 15 2009, 09:15 ET, Last post: Nov. 30 2011, 20:08 ET)
Not for produciton work.
Mossberg 9200a1 action???  (Started: Nov. 30 2011, 11:57 ET, Last post: Nov. 30 2011, 14:11 ET)
Anyone built an mp5 semi kit?  (Started: Nov. 17 2011, 03:26 ET, Last post: Nov. 30 2011, 12:03 ET)
Welrod design  (Started: Jul. 4 2011, 12:18 ET, Last post: Nov. 28 2011, 00:43 ET)
Anybody have anything
Hopkin allen  (Started: Nov. 24 2011, 17:39 ET, Last post: Nov. 26 2011, 22:48 ET)
Adjustable rear sight?  (Started: Nov. 13 2011, 10:28 ET, Last post: Nov. 25 2011, 17:53 ET)
.22 reamer, bullet falls out  (Started: Nov. 22 2011, 02:47 ET, Last post: Nov. 23 2011, 01:58 ET)
Eaa witness failing to eject  (Started: Nov. 21 2011, 11:52 ET, Last post: Nov. 21 2011, 19:02 ET)
Goryunov barrel repair  (Started: Nov. 20 2011, 06:25 ET, Last post: Nov. 20 2011, 11:38 ET)
My lathe is too small
Gun savír custom oil high gloss  (Started: Nov. 17 2011, 18:31 ET, Last post: Nov. 17 2011, 20:49 ET)
Stevens 44 1/2  (Started: Nov. 13 2011, 15:17 ET, Last post: Nov. 15 2011, 16:45 ET)
H&r model 755/760 bumper insert plug  (Started: Nov. 10 2011, 18:22 ET, Last post: Nov. 13 2011, 18:42 ET)
What size are they, and what material?
Screws made  (Started: Nov. 9 2011, 18:51 ET, Last post: Nov. 13 2011, 09:46 ET)
Need kasonite help  (Started: Nov. 11 2011, 14:12 ET, Last post: Nov. 13 2011, 00:03 ET)
Why are gun drill so good at concentricity?  (Started: Nov. 10 2011, 14:13 ET, Last post: Nov. 10 2011, 21:37 ET)
Stopping power of 9x19 subsonic  (Started: Nov. 8 2011, 06:10 ET, Last post: Nov. 8 2011, 10:57 ET)
Comparing to fmj and jhp
Colt 1903 vs savage 1907  (Started: Nov. 7 2011, 12:16 ET, Last post: Nov. 7 2011, 12:16 ET)
Savage md.1907  (Started: Nov. 5 2011, 19:16 ET, Last post: Nov. 7 2011, 08:09 ET)
Marlin model 88 22lr  (Started: Nov. 6 2011, 19:46 ET, Last post: Nov. 7 2011, 05:59 ET)
Schematic needed
Leather holster  (Started: Nov. 4 2011, 16:33 ET, Last post: Nov. 5 2011, 15:27 ET)
Ruger single six 9 1/2 inch barrel
Ithaca model 700 ou shotgun  (Started: Nov. 3 2011, 17:23 ET, Last post: Nov. 3 2011, 17:23 ET)
Finish on receiver
Marlin color case hardening  (Started: Nov. 2 2011, 11:36 ET, Last post: Nov. 2 2011, 11:51 ET)
Marlin color case hardening
Savage 99f 300 savage  (Started: Oct. 28 2011, 22:14 ET, Last post: Nov. 2 2011, 11:28 ET)
Reboring and rechamber to 338 federal
Am i losing it?  (Started: Oct. 30 2011, 09:59 ET, Last post: Oct. 30 2011, 21:56 ET)
Brownell's screws?
8mm kurtz reamer  (Started: Oct. 28 2011, 21:22 ET, Last post: Oct. 28 2011, 23:38 ET)
12ga 3.5" chambering a blank  (Started: Oct. 28 2011, 17:30 ET, Last post: Oct. 28 2011, 17:30 ET)
Have a barrel blank, looking to finish
Cocking piece tang vs trigger sear  (Started: Oct. 28 2011, 11:31 ET, Last post: Oct. 28 2011, 13:23 ET)
Turk mauser  (Started: Oct. 23 2011, 21:48 ET, Last post: Oct. 26 2011, 21:20 ET)
Bolt stop
Mauser problem  (Started: Oct. 20 2011, 01:25 ET, Last post: Oct. 26 2011, 17:15 ET)
Sticky bolt
E r shaw barrels  (Started: Oct. 5 2011, 23:21 ET, Last post: Oct. 25 2011, 01:26 ET)
Still in business?
Ok, just what are they called?  (Started: Oct. 24 2011, 01:39 ET, Last post: Oct. 24 2011, 22:19 ET)
And where are they sold?
Franchi 48 al  (Started: Oct. 23 2011, 13:32 ET, Last post: Oct. 24 2011, 17:46 ET)
Action spring tube retainer
Mauser 2000  (Started: Oct. 17 2011, 17:38 ET, Last post: Oct. 23 2011, 23:52 ET)
Bolt body dimensions
Ok physics buffs, this one's for you!  (Started: Oct. 20 2011, 20:54 ET, Last post: Oct. 22 2011, 17:40 ET)
Helix pitch question...
Drill hole size info needed  (Started: Oct. 20 2011, 15:31 ET, Last post: Oct. 21 2011, 12:40 ET)
What size of drill do i need
Holmes ejector question  (Started: Oct. 14 2011, 08:41 ET, Last post: Oct. 14 2011, 16:18 ET)
Remington model 39  (Started: Oct. 14 2011, 13:44 ET, Last post: Oct. 14 2011, 13:44 ET)
Removing barrel
Rebarreling a later model s & w withut the barrel  (Started: Oct. 12 2011, 23:29 ET, Last post: Oct. 13 2011, 13:19 ET)
Rebarreling a s & w revolver
Enfield no.4 mk1 bolt head drawings  (Started: Sep. 30 2011, 19:41 ET, Last post: Oct. 13 2011, 07:37 ET)
03-a3 drill rifle  (Started: Aug. 31 2011, 01:24 ET, Last post: Oct. 10 2011, 06:40 ET)
Bench rest mag. follower  (Started: Oct. 5 2011, 02:02 ET, Last post: Oct. 10 2011, 06:33 ET)
Lock of super comanche pistol .410/45lc  (Started: Oct. 8 2011, 12:07 ET, Last post: Oct. 8 2011, 13:40 ET)
How does the locking mechanism work
Stupid question on barrel blank  (Started: Sep. 22 2011, 04:24 ET, Last post: Oct. 7 2011, 01:33 ET)
Wich end is chambered
Shooting gallery  (Started: Jul. 18 2009, 03:31 ET, Last post: Oct. 7 2011, 00:02 ET)
Details wanted
Mpa22t  (Started: Sep. 29 2011, 14:28 ET, Last post: Oct. 3 2011, 14:00 ET)
Anyone built one of those?
50 bmg  (Started: Sep. 27 2011, 19:56 ET, Last post: Sep. 29 2011, 18:42 ET)
Gunmetal design
Thompson center tcr blueprints  (Started: Sep. 28 2011, 15:22 ET, Last post: Sep. 29 2011, 11:04 ET)
Anyone built/rebuilt one
Custom7.62x54r?  (Started: Sep. 21 2011, 11:48 ET, Last post: Sep. 28 2011, 11:18 ET)
Boxlock  (Started: Sep. 26 2011, 18:55 ET, Last post: Sep. 27 2011, 20:29 ET)
Action schematics
Shortening a mod 870  (Started: Sep. 23 2011, 17:13 ET, Last post: Sep. 27 2011, 19:54 ET)
How to determine stock length?
Breech pin opinion  (Started: Sep. 27 2011, 11:53 ET, Last post: Sep. 27 2011, 15:39 ET)
1911 springs  (Started: Sep. 22 2011, 01:33 ET, Last post: Sep. 27 2011, 10:29 ET)
Rossi 877  (Started: Sep. 22 2011, 08:54 ET, Last post: Sep. 23 2011, 12:33 ET)
Need some precise dimentions
Recoil spring dimensions  (Started: Sep. 22 2011, 12:40 ET, Last post: Sep. 22 2011, 22:26 ET)
Garcia bronco trigger / sear layout  (Started: Aug. 26 2011, 05:33 ET, Last post: Sep. 22 2011, 08:43 ET)
Bolt action lugs  (Started: Sep. 6 2011, 20:33 ET, Last post: Sep. 22 2011, 00:18 ET)
Lug strength
Ball screws  (Started: Sep. 19 2011, 20:09 ET, Last post: Sep. 20 2011, 10:22 ET)
A source
Building books  (Started: Aug. 5 2011, 18:24 ET, Last post: Sep. 18 2011, 22:57 ET)
Building target rifles
Feed ramps  (Started: Sep. 18 2011, 11:57 ET, Last post: Sep. 18 2011, 21:45 ET)
Angles of feed ramps
Hatsun escort 12ga. auto  (Started: Aug. 23 2011, 23:50 ET, Last post: Sep. 16 2011, 18:39 ET)
Won't cycle consistantly
Schematic  (Started: Sep. 15 2011, 17:05 ET, Last post: Sep. 15 2011, 21:12 ET)
Volunteer arms shotgun
9mm chamber reamer dimensions  (Started: Sep. 9 2011, 21:49 ET, Last post: Sep. 13 2011, 08:38 ET)
Sharp edge on new chamber  (Started: Sep. 8 2011, 23:04 ET, Last post: Sep. 9 2011, 19:35 ET)
Enfield barrel  (Started: Sep. 5 2011, 21:24 ET, Last post: Sep. 7 2011, 20:23 ET)
Scope mounting holes drilled in barrel.
Remington xmark trigger replacement  (Started: Aug. 28 2011, 10:56 ET, Last post: Sep. 6 2011, 09:54 ET)
Dims for picatinny accessories  (Started: Feb. 1 2011, 23:11 ET, Last post: Sep. 6 2011, 09:45 ET)
For a scope base, not the rail itself
Cock on closing 98 mauser  (Started: Aug. 30 2011, 12:41 ET, Last post: Sep. 4 2011, 11:56 ET)
Czech 50 pistol  (Started: Aug. 31 2011, 14:55 ET, Last post: Aug. 31 2011, 23:44 ET)
What ammo does it use?
Windicator grip?  (Started: Aug. 26 2011, 23:19 ET, Last post: Aug. 30 2011, 18:45 ET)
Skb shotgun  (Started: Aug. 28 2011, 20:44 ET, Last post: Aug. 28 2011, 23:51 ET)
Rechambering a german kiplauf (pic)  (Started: Aug. 12 2011, 12:57 ET, Last post: Aug. 26 2011, 14:42 ET)
Is it feasible?
Lathe spiders...  (Started: Aug. 6 2011, 02:09 ET, Last post: Aug. 25 2011, 14:29 ET)
Alignment question
Arminius hw7 .22 revolver  (Started: Sep. 9 2010, 23:57 ET, Last post: Aug. 23 2011, 15:28 ET)
Need to buy, or need to make a part
Muzzle brake design  (Started: Jul. 18 2011, 11:01 ET, Last post: Aug. 22 2011, 13:03 ET)
Neck & throat reamer...  (Started: Aug. 19 2011, 02:23 ET, Last post: Aug. 19 2011, 11:39 ET)
Dragon skin serrations  (Started: Aug. 11 2011, 10:40 ET, Last post: Aug. 16 2011, 08:33 ET)
Set up and sequence for cutting
S&w model 64 hammer replacement  (Started: Aug. 15 2011, 12:06 ET, Last post: Aug. 15 2011, 14:22 ET)
Hammer interchangability
Free floating barrels  (Started: Aug. 12 2011, 15:19 ET, Last post: Aug. 13 2011, 10:05 ET)
Free floated barrels
Elec motor heatsink  (Started: Aug. 11 2011, 01:49 ET, Last post: Aug. 11 2011, 04:18 ET)
Winchester pre 64 mod chambering help  (Started: Aug. 2 2011, 20:11 ET, Last post: Aug. 10 2011, 00:26 ET)
Remington #1 rolling block strength?  (Started: Aug. 15 2009, 21:39 ET, Last post: Aug. 9 2011, 16:06 ET)
22lr fiering pin hole on a 9mm blank pistol  (Started: Aug. 3 2011, 19:58 ET, Last post: Aug. 4 2011, 19:41 ET)
How would you do it
22lr barrel and chamber  (Started: Aug. 3 2011, 14:02 ET, Last post: Aug. 4 2011, 11:16 ET)
What drill sizes?
Walther p1 sight question...  (Started: Jul. 23 2011, 20:13 ET, Last post: Aug. 1 2011, 15:20 ET)
1911 grip screw die  (Started: Jul. 31 2011, 03:33 ET, Last post: Jul. 31 2011, 15:09 ET)
Browning a-500 recoil operated shotgun  (Started: Jul. 21 2011, 08:35 ET, Last post: Jul. 21 2011, 16:35 ET)
Clean and oil
Knight bk 95  (Started: Jul. 15 2011, 19:28 ET, Last post: Jul. 19 2011, 18:41 ET)
209 conversion
New s&w 52-1 extractor  (Started: Jul. 17 2011, 11:57 ET, Last post: Jul. 19 2011, 18:26 ET)
Smith & wesson revolver  (Started: Jul. 17 2011, 12:24 ET, Last post: Jul. 18 2011, 12:21 ET)
What model is it
Mossberg model m  (Started: Jun. 19 2011, 20:20 ET, Last post: Jul. 15 2011, 12:41 ET)
Shotgun barrels  (Started: Jul. 12 2011, 21:26 ET, Last post: Jul. 13 2011, 20:19 ET)
Marks
Chamber reamer for .22 project  (Started: Jul. 13 2011, 01:32 ET, Last post: Jul. 13 2011, 16:55 ET)
Reaming a chamber
Remington model 11  (Started: Jul. 9 2011, 12:07 ET, Last post: Jul. 9 2011, 15:04 ET)
Replacing the fiber cushion for the bolt
Gunsmithing workshops  (Started: Jul. 7 2011, 18:15 ET, Last post: Jul. 8 2011, 19:02 ET)
Savage/stevens 842/340 glass bedding  (Started: Jun. 28 2011, 18:54 ET, Last post: Jul. 2 2011, 16:54 ET)
Rem 700 fire control group pins  (Started: Jun. 30 2011, 19:04 ET, Last post: Jul. 2 2011, 09:06 ET)
Good or bad idea on mauser bolt  (Started: Jun. 27 2011, 02:37 ET, Last post: Jul. 1 2011, 23:14 ET)
Shotgun ribs  (Started: Jun. 28 2011, 17:18 ET, Last post: Jun. 30 2011, 16:42 ET)
Installation
Boyds  (Started: Jun. 24 2011, 21:46 ET, Last post: Jun. 29 2011, 10:41 ET)
Remington model 11 stock and forend
Cycle length of semi autos?  (Started: Jun. 25 2011, 22:20 ET, Last post: Jun. 28 2011, 10:48 ET)
Test firing 50 bmg...  (Started: Jun. 26 2011, 23:25 ET, Last post: Jun. 27 2011, 00:42 ET)
Heat treat question
Breaking sharp edge of new chamber  (Started: Jun. 22 2011, 22:45 ET, Last post: Jun. 26 2011, 22:41 ET)
Savage 842  (Started: Jun. 9 2011, 21:11 ET, Last post: Jun. 24 2011, 20:40 ET)
Magazine and feed
Hard cock on opening mauser  (Started: Jun. 22 2011, 16:49 ET, Last post: Jun. 23 2011, 03:29 ET)
How to hand chamber ream?  (Started: Jun. 6 2011, 00:02 ET, Last post: Jun. 21 2011, 00:19 ET)
Savage fox bse series h 12 ga.  (Started: Jun. 16 2011, 17:31 ET, Last post: Jun. 20 2011, 16:45 ET)
Right extractor
Barrel blanks  (Started: Jun. 2 2011, 22:34 ET, Last post: Jun. 19 2011, 12:15 ET)
High temperature paint  (Started: Jun. 15 2011, 12:40 ET, Last post: Jun. 16 2011, 15:14 ET)
Lee enfield no.4 bolt head replacement  (Started: Jun. 15 2011, 15:30 ET, Last post: Jun. 15 2011, 15:30 ET)
Lee enfield no1 mk111  (Started: Jun. 9 2011, 23:38 ET, Last post: Jun. 13 2011, 00:03 ET)
5.5mm reamer bit  (Started: Jun. 5 2011, 14:40 ET, Last post: Jun. 9 2011, 18:15 ET)
Anodizing  (Started: Jun. 8 2011, 12:20 ET, Last post: Jun. 9 2011, 09:35 ET)
Ackley improved 30 degree  (Started: Jun. 7 2011, 11:10 ET, Last post: Jun. 7 2011, 11:10 ET)
Remington model 510 targetmaster bolt problem  (Started: Jun. 2 2011, 13:49 ET, Last post: Jun. 3 2011, 19:46 ET)
1911 front sight replacement  (Started: May 31 2011, 17:23 ET, Last post: May 31 2011, 20:35 ET)
Hk sr9  (Started: May 23 2011, 20:17 ET, Last post: May 28 2011, 18:18 ET)
Proper stainless steel for .380 pistol  (Started: May 7 2011, 10:34 ET, Last post: May 25 2011, 21:02 ET)
Tikka thread pattern??  (Started: May 16 2011, 17:36 ET, Last post: May 23 2011, 17:23 ET)
Rimfire/rear locking action strength  (Started: May 9 2011, 11:19 ET, Last post: May 18 2011, 02:23 ET)
Savage 99 trigger  (Started: May 17 2011, 18:30 ET, Last post: May 17 2011, 23:13 ET)
H & r 929  (Started: May 16 2011, 19:47 ET, Last post: May 17 2011, 10:22 ET)
Shotgun forearm sleeve removal  (Started: May 14 2011, 14:43 ET, Last post: May 17 2011, 06:55 ET)
Uberti 1872 rechambering  (Started: Apr. 7 2011, 14:46 ET, Last post: May 15 2011, 18:26 ET)
Reaming a 45 schofiled cyl to 45 colt
Pre 64 winchester bolt  (Started: May 12 2011, 22:57 ET, Last post: May 15 2011, 16:26 ET)
Might be a problem
Mossberg 935 vs 930 barrel interchangeability  (Started: May 11 2011, 11:38 ET, Last post: May 14 2011, 18:39 ET)
Tig-200c question  (Started: Apr. 30 2011, 21:52 ET, Last post: May 12 2011, 13:07 ET)
Have any one try it ?
Left handed .308 ar  (Started: May 9 2011, 12:28 ET, Last post: May 11 2011, 00:32 ET)
Dillon/henrod 2000 welding torch  (Started: May 1 2011, 01:50 ET, Last post: May 10 2011, 08:19 ET)
Any good?
What parts in s&w revolvers are interchangable  (Started: May 7 2011, 12:06 ET, Last post: May 7 2011, 21:46 ET)
Interchangable parts of smith and wesson
Kimber 22 rimfire conversion disassembly  (Started: May 7 2011, 18:03 ET, Last post: May 7 2011, 18:08 ET)
How to remove firing pin and extractor
Broach material  (Started: May 4 2011, 20:57 ET, Last post: May 6 2011, 10:12 ET)
Which way to install .22 liner  (Started: May 5 2011, 06:10 ET, Last post: May 5 2011, 23:13 ET)
Ruger mk2  (Started: May 2 2011, 18:47 ET, Last post: May 4 2011, 11:02 ET)
Assembled wrong
Gun, large firing device  (Started: May 3 2011, 00:11 ET, Last post: May 3 2011, 16:56 ET)
Is it?  or what?  on gunbroker.
17-4 ph stainless steel round rod  (Started: Apr. 30 2011, 03:14 ET, Last post: Apr. 30 2011, 21:36 ET)
Barrel blanks in canada  (Started: Apr. 21 2011, 16:26 ET, Last post: Apr. 27 2011, 14:05 ET)
Case colouring  (Started: Apr. 26 2011, 14:56 ET, Last post: Apr. 27 2011, 13:46 ET)
Rust bluing
Coming back with an old question...  (Started: Apr. 11 2011, 16:50 ET, Last post: Apr. 26 2011, 23:44 ET)
I made a good deal  (Started: Apr. 25 2011, 16:50 ET, Last post: Apr. 26 2011, 19:03 ET)
What would you do with it ?
Need a little help  (Started: Apr. 26 2011, 09:45 ET, Last post: Apr. 26 2011, 13:54 ET)
.22 bolt action
Surplus mosin bolt open trouble  (Started: Jan. 14 2011, 21:20 ET, Last post: Apr. 25 2011, 21:30 ET)
22 air gun barrel  (Started: Apr. 19 2011, 23:01 ET, Last post: Apr. 23 2011, 16:49 ET)
Barrel making?  (Started: Apr. 5 2011, 13:51 ET, Last post: Apr. 23 2011, 10:23 ET)
How to bore out the solid stock.
Chicopee  (Started: Apr. 22 2011, 16:31 ET, Last post: Apr. 22 2011, 20:07 ET)
Quick questio
Rifling twist rate question  (Started: Apr. 17 2011, 23:09 ET, Last post: Apr. 21 2011, 23:13 ET)
Bsa airsporter wood stock  (Started: Apr. 15 2011, 01:23 ET, Last post: Apr. 16 2011, 01:34 ET)
Ned help
Making swages & punches  (Started: Apr. 11 2011, 19:34 ET, Last post: Apr. 14 2011, 19:50 ET)
Semi auto mac-10 plans  (Started: Apr. 1 2011, 00:39 ET, Last post: Apr. 14 2011, 17:07 ET)
H&r 929  (Started: Apr. 14 2011, 15:00 ET, Last post: Apr. 14 2011, 16:56 ET)
Take down
Stock making question  (Started: Apr. 8 2011, 00:12 ET, Last post: Apr. 10 2011, 02:51 ET)
Any hope for this receiver (pic)  (Started: Apr. 3 2011, 06:42 ET, Last post: Apr. 8 2011, 14:04 ET)
Found a rifle  (Started: Sep. 23 2009, 20:15 ET, Last post: Apr. 7 2011, 17:14 ET)
Help with restore !!!!!!!
Installling a rifle barrel  (Started: Mar. 22 2011, 00:42 ET, Last post: Apr. 7 2011, 02:34 ET)
Barrel install
50 bmg  (Started: Apr. 6 2011, 16:11 ET, Last post: Apr. 7 2011, 00:08 ET)
Chamber/reamer  plans/dimensions
Lr mauser barrel die  (Started: Apr. 6 2011, 16:57 ET, Last post: Apr. 6 2011, 21:01 ET)
Where can i buy one
Shotgun barrel choices  (Started: Apr. 5 2011, 03:11 ET, Last post: Apr. 6 2011, 01:26 ET)
Shotgun barrel
Gun models for getting dimmensions  (Started: Apr. 2 2011, 14:34 ET, Last post: Apr. 4 2011, 21:22 ET)
First bedding snag  (Started: Mar. 28 2011, 18:53 ET, Last post: Apr. 4 2011, 20:13 ET)
Next thing to try
Beretta 38 parts kit?  (Started: Apr. 3 2011, 09:15 ET, Last post: Apr. 3 2011, 09:15 ET)
Spanish copy of a s&w  (Started: Apr. 2 2011, 18:00 ET, Last post: Apr. 2 2011, 19:12 ET)
32 s&w long
Shotgun chamber and bore  (Started: Mar. 30 2011, 08:52 ET, Last post: Mar. 31 2011, 08:00 ET)
Rust pitting
What bit for .22 bore and metal type  (Started: Mar. 25 2011, 00:10 ET, Last post: Mar. 26 2011, 15:36 ET)
Modifying an anschutz1516 64 action to take hornet  (Started: Mar. 25 2011, 16:55 ET, Last post: Mar. 25 2011, 21:22 ET)
Anyone completed an 80% garand casting?  (Started: Mar. 25 2011, 19:22 ET, Last post: Mar. 25 2011, 21:20 ET)
Coach gun?  (Started: Mar. 25 2011, 13:21 ET, Last post: Mar. 25 2011, 16:45 ET)
Chambering a blowback barrel  (Started: Feb. 22 2011, 21:59 ET, Last post: Mar. 23 2011, 11:59 ET)
Mac-11 - starting with flat  (Started: Feb. 17 2011, 09:05 ET, Last post: Mar. 23 2011, 08:50 ET)
Should i bend in a jig or cut/weld?
Ar barrel choices  (Started: Mar. 2 2011, 14:24 ET, Last post: Mar. 22 2011, 22:24 ET)
Manurhin pp .22  (Started: Mar. 2 2011, 23:05 ET, Last post: Mar. 22 2011, 18:42 ET)
Missing firing pin
Steel ?  (Started: Feb. 24 2011, 00:08 ET, Last post: Mar. 22 2011, 10:56 ET)
Springfield armory m1a receiver hardness  (Started: Mar. 8 2011, 02:00 ET, Last post: Mar. 16 2011, 05:14 ET)
Tool steels?  (Started: Mar. 14 2011, 02:26 ET, Last post: Mar. 14 2011, 23:39 ET)
Bottom tap  (Started: Mar. 1 2011, 12:57 ET, Last post: Mar. 12 2011, 12:36 ET)
Ar piston system  (Started: Mar. 9 2011, 14:09 ET, Last post: Mar. 10 2011, 15:37 ET)
10/22 brown bess  (Started: Feb. 23 2011, 13:52 ET, Last post: Mar. 10 2011, 11:09 ET)
Lets get some input
Sten bolt  (Started: Feb. 23 2011, 15:06 ET, Last post: Mar. 10 2011, 11:05 ET)
Vertical mag mods
Some help with my final year project  (Started: Mar. 9 2011, 06:22 ET, Last post: Mar. 9 2011, 19:53 ET)
870 shell latch?  (Started: Mar. 5 2011, 20:12 ET, Last post: Mar. 8 2011, 10:32 ET)
How brittle is a mauser extractor?  (Started: Feb. 23 2011, 14:25 ET, Last post: Mar. 8 2011, 01:35 ET)
How to remove tc thunder hawk barrel  (Started: Mar. 3 2011, 22:09 ET, Last post: Mar. 3 2011, 22:09 ET)
Snail trap  (Started: Feb. 22 2011, 10:19 ET, Last post: Feb. 28 2011, 14:26 ET)
M1a1 operating rod. s. a.  (Started: Feb. 26 2011, 03:15 ET, Last post: Feb. 26 2011, 22:10 ET)
Beretta 92 pistol  (Started: Feb. 20 2011, 05:26 ET, Last post: Feb. 26 2011, 15:42 ET)
Fitting a flat spring  (Started: Feb. 25 2011, 11:53 ET, Last post: Feb. 26 2011, 13:08 ET)
Is it normal to have to stone/cut
Maadi griffin  (Started: Feb. 23 2011, 17:53 ET, Last post: Feb. 23 2011, 17:53 ET)
Plans/blueprints
1911/40 cal  (Started: Feb. 8 2011, 21:48 ET, Last post: Feb. 21 2011, 22:13 ET)
Spring rate
S&w 99  (Started: Feb. 16 2011, 11:19 ET, Last post: Feb. 20 2011, 19:40 ET)
Slide
Figuring out degrees on a barrel in lathe?  (Started: Feb. 17 2011, 18:03 ET, Last post: Feb. 19 2011, 19:18 ET)
Shotgun forend crack - acraglas gel  (Started: Feb. 18 2011, 09:17 ET, Last post: Feb. 19 2011, 10:54 ET)
1st post  (Started: Feb. 14 2011, 19:58 ET, Last post: Feb. 17 2011, 11:57 ET)
Reamer making question
Muzzle crowning and tool bits  (Started: Feb. 16 2011, 00:32 ET, Last post: Feb. 16 2011, 21:16 ET)
Making reciever mandrels  (Started: Feb. 16 2011, 01:32 ET, Last post: Feb. 16 2011, 21:09 ET)
What can i do with this?  (Started: Sep. 16 2010, 00:56 ET, Last post: Feb. 16 2011, 07:21 ET)
Or do i just have a neat paperweight?
Mauser broomhandle  (Started: Feb. 14 2011, 22:49 ET, Last post: Feb. 15 2011, 07:13 ET)
Re barrel
Ruger #1 front sight band removal  (Started: Feb. 8 2011, 05:42 ET, Last post: Feb. 9 2011, 10:31 ET)
Stoeger coach gun  (Started: Feb. 8 2011, 13:26 ET, Last post: Feb. 8 2011, 13:26 ET)
Trigger job
Straight pull .223  (Started: Feb. 2 2011, 23:59 ET, Last post: Feb. 6 2011, 18:57 ET)
Break action shotgun receivers  (Started: Jan. 28 2011, 10:38 ET, Last post: Feb. 2 2011, 12:54 ET)
Are they strong enough
Drill size for reamer  (Started: Jan. 30 2011, 18:28 ET, Last post: Feb. 2 2011, 01:39 ET)
Drill size
Wich tube?  (Started: Jan. 29 2011, 13:51 ET, Last post: Feb. 1 2011, 20:42 ET)
Easy 500 s&w reamer?  (Started: Jan. 27 2011, 17:03 ET, Last post: Feb. 1 2011, 19:09 ET)
How about z 17/32 reamer
Lapping a chrome lined barrel  (Started: Jan. 21 2011, 23:12 ET, Last post: Jan. 31 2011, 19:56 ET)
Good stainless steel for custom bolt action.  (Started: Jan. 30 2011, 16:14 ET, Last post: Jan. 31 2011, 13:54 ET)
7x75r vom hofe express reamer  (Started: Jan. 29 2011, 23:39 ET, Last post: Jan. 31 2011, 13:15 ET)
Group size  (Started: Jan. 30 2011, 14:12 ET, Last post: Jan. 30 2011, 18:09 ET)
Accuracy
Remington 722 .300 savage  (Started: Jan. 27 2011, 22:55 ET, Last post: Jan. 30 2011, 17:31 ET)
Pitting  (Started: Jan. 30 2011, 11:59 ET, Last post: Jan. 30 2011, 17:12 ET)
Exterior pitting
Bullet strike walk off  (Started: Jan. 30 2011, 10:12 ET, Last post: Jan. 30 2011, 10:12 ET)
Accuracy problem
Stevens 58 d / 20 gauge - firing pin strike weak?  (Started: Jan. 25 2011, 11:12 ET, Last post: Jan. 26 2011, 12:30 ET)
Bolt action shotgun
Colt 45 sa  (Started: Jan. 25 2011, 18:03 ET, Last post: Jan. 26 2011, 10:36 ET)
Information
Stainless foil for heat treating  (Started: Jun. 21 2010, 16:13 ET, Last post: Jan. 22 2011, 23:03 ET)
Anyone have experience using it
Barrel in freezer how much will it shrink?  (Started: Jan. 12 2011, 19:19 ET, Last post: Jan. 22 2011, 22:49 ET)
Glock 36 slide  (Started: Jan. 22 2011, 22:36 ET, Last post: Jan. 22 2011, 22:36 ET)
Aluminum stock bedding questions  (Started: Jan. 21 2011, 13:29 ET, Last post: Jan. 22 2011, 22:05 ET)
What parts of the accustock to remove
Options and help on an odd 1911 clone(ish)  (Started: Jan. 17 2011, 23:06 ET, Last post: Jan. 22 2011, 17:00 ET)
Llama (star?) .38 super/9mm largo
357 chamber  (Started: Jan. 18 2011, 11:56 ET, Last post: Jan. 21 2011, 18:59 ET)
357 maximum
Machining a taper  (Started: Jan. 16 2011, 08:17 ET, Last post: Jan. 17 2011, 10:09 ET)
How do you machine a concave taper?
Welding a barrel  (Started: Jan. 13 2011, 19:18 ET, Last post: Jan. 16 2011, 22:23 ET)
Chicopee c.f. questions  (Started: Jan. 1 2011, 18:57 ET, Last post: Jan. 16 2011, 16:19 ET)
Pressure on, cross bolt lock
Need help to id ithaca double model  (Started: Jan. 4 2011, 11:37 ET, Last post: Jan. 16 2011, 03:25 ET)
Remington 870  (Started: Jan. 15 2011, 10:34 ET, Last post: Jan. 15 2011, 23:52 ET)
357 mag gun  (Started: Jan. 14 2011, 13:17 ET, Last post: Jan. 15 2011, 14:18 ET)
What is the simplest semi pistol to build?  (Started: Jan. 12 2011, 13:21 ET, Last post: Jan. 14 2011, 22:56 ET)
L c smith barrels  (Started: Jan. 13 2011, 23:28 ET, Last post: Jan. 14 2011, 20:05 ET)
Where to find?
10 ga 20  mm black powder barrel thicknes?  (Started: Dec. 28 2010, 02:07 ET, Last post: Jan. 12 2011, 18:56 ET)
Milling dovetail sight  (Started: Dec. 14 2010, 11:05 ET, Last post: Jan. 10 2011, 12:07 ET)
.22lr to .22 wmr rechamber.  (Started: Oct. 8 2010, 20:31 ET, Last post: Jan. 10 2011, 08:57 ET)
Is it possible?
Barrel bulge  (Started: Nov. 27 2010, 07:51 ET, Last post: Jan. 10 2011, 08:48 ET)
Browning hi power hammer notch  (Started: Jan. 5 2011, 14:51 ET, Last post: Jan. 9 2011, 21:43 ET)
Hi power hammer question
.32 s&w long  (Started: Nov. 12 2010, 09:17 ET, Last post: Jan. 9 2011, 13:50 ET)
Gunsmithing charges to shops  (Started: Dec. 14 2010, 14:46 ET, Last post: Jan. 9 2011, 12:59 ET)
Press fit  (Started: Nov. 23 2010, 19:10 ET, Last post: Jan. 9 2011, 12:18 ET)
How much
Ar-10 barrel extension torque  (Started: Dec. 27 2010, 22:08 ET, Last post: Jan. 8 2011, 09:33 ET)
Barrel thickness equation?  (Started: Nov. 19 2010, 01:56 ET, Last post: Jan. 7 2011, 01:28 ET)
Bill holmes book  (Started: Jan. 3 2011, 15:35 ET, Last post: Jan. 5 2011, 17:35 ET)
Who got this book?
Bolt lug strength  (Started: Jan. 3 2011, 22:25 ET, Last post: Jan. 4 2011, 20:03 ET)
Rem 700 bolt side clearance to bolt body  (Started: Jan. 4 2011, 12:39 ET, Last post: Jan. 4 2011, 12:39 ET)
Electric muzzleloader ignition  (Started: Dec. 25 2010, 13:43 ET, Last post: Jan. 3 2011, 22:25 ET)
Kel tec p-11 questions  (Started: Jan. 2 2011, 22:30 ET, Last post: Jan. 2 2011, 23:45 ET)
Remington model 1917  (Started: Jan. 2 2011, 19:02 ET, Last post: Jan. 2 2011, 22:31 ET)
Cal ?
Charles daly auto shotgun  (Started: Jan. 2 2011, 18:08 ET, Last post: Jan. 2 2011, 18:08 ET)
Cycling issues
Magazine popping out on ppk/s  (Started: Jul. 25 2009, 20:07 ET, Last post: Jan. 2 2011, 12:44 ET)
Any sugestions?
Metal question  (Started: Dec. 30 2010, 00:24 ET, Last post: Dec. 31 2010, 06:39 ET)
Filing a dovetail  (Started: Dec. 28 2010, 02:41 ET, Last post: Dec. 29 2010, 20:37 ET)
How to go about it?
Chapman safety  (Started: Sep. 2 2010, 15:13 ET, Last post: Dec. 27 2010, 21:52 ET)
Striker modification?
Remington model #6, anyone used this design?  (Started: Dec. 27 2010, 13:05 ET, Last post: Dec. 27 2010, 20:56 ET)
.380 kel-tec  (Started: Dec. 25 2010, 18:33 ET, Last post: Dec. 27 2010, 09:58 ET)
Magazine clip
Mossberg rifle barrel removal  (Started: Dec. 11 2010, 16:32 ET, Last post: Dec. 26 2010, 01:37 ET)
Mossberg 100atr in 243 winchester
Ruger m77 bolt safety  (Started: Dec. 2 2010, 21:41 ET, Last post: Dec. 26 2010, 01:17 ET)
Old model - need one with .223 face
Cimarron plinkerton 22 accuracy and forcing cone  (Started: Nov. 12 2010, 08:48 ET, Last post: Dec. 24 2010, 13:32 ET)
Hand in hand?
Charles daly semi auto shotgun  (Started: Dec. 23 2010, 10:18 ET, Last post: Dec. 23 2010, 21:25 ET)
Parts
Model 70 short action extended magazine  (Started: Nov. 20 2010, 17:23 ET, Last post: Dec. 22 2010, 21:52 ET)
Does anyone make them
How do i fit an ar 15 barrel extension  (Started: Dec. 15 2010, 20:29 ET, Last post: Dec. 22 2010, 02:06 ET)
Fitting ar 15 barrel extension to blank
Stevens little scout 14 1/2  (Started: Dec. 16 2010, 10:15 ET, Last post: Dec. 18 2010, 08:07 ET)
Parts
Fitting a glock barrel  (Started: Dec. 14 2010, 20:21 ET, Last post: Dec. 14 2010, 23:41 ET)
Cock on open/close pros & cons  (Started: Dec. 1 2010, 23:43 ET, Last post: Dec. 14 2010, 11:28 ET)
Whats the best?
Colt woodsman automatic  (Started: Dec. 5 2010, 00:23 ET, Last post: Dec. 9 2010, 08:55 ET)
Woodsman fully automatic
Shipping cartridges,  (Started: Dec. 7 2010, 10:33 ET, Last post: Dec. 7 2010, 10:44 ET)
Inaccurate rifle  (Started: Aug. 15 2010, 09:04 ET, Last post: Dec. 5 2010, 11:35 ET)
Zeroing
300 h&h magnum barrel  (Started: Nov. 29 2010, 22:00 ET, Last post: Dec. 3 2010, 19:24 ET)
To a 7.62x39
Need help finding a vintage 1911 part, or repro.  (Started: Dec. 3 2010, 06:51 ET, Last post: Dec. 3 2010, 06:51 ET)
Rear sight for a commercial 1912 built
22lr rifle to air gun conversion?  (Started: Nov. 28 2010, 18:09 ET, Last post: Dec. 2 2010, 16:16 ET)
Anyone don it b4?
My new rifle  (Started: Nov. 5 2010, 10:32 ET, Last post: Nov. 30 2010, 15:53 ET)
S&w revolver  (Started: Nov. 24 2010, 16:39 ET, Last post: Nov. 30 2010, 07:26 ET)
What model is it?
Hawes single action .22  (Started: Nov. 28 2010, 13:53 ET, Last post: Nov. 30 2010, 07:23 ET)
Rear sight
Ruger no.1 sight rib dowel removal  (Started: Nov. 19 2010, 21:13 ET, Last post: Nov. 28 2010, 19:19 ET)
Starter machining advice  (Started: Nov. 20 2010, 11:29 ET, Last post: Nov. 28 2010, 11:59 ET)
Dovetail sizes  (Started: Nov. 26 2010, 14:11 ET, Last post: Nov. 27 2010, 00:19 ET)
What steel to use for flash hider?  (Started: Nov. 24 2010, 18:39 ET, Last post: Nov. 26 2010, 12:39 ET)
Suppressor related question  (Started: Nov. 19 2010, 23:49 ET, Last post: Nov. 24 2010, 12:51 ET)
Headspacing with cams on bolt  (Started: Nov. 5 2010, 00:14 ET, Last post: Nov. 23 2010, 22:03 ET)
A homemade action
Ruger #1 light firing pin strike  (Started: Sep. 25 2010, 21:18 ET, Last post: Nov. 16 2010, 16:21 ET)
Ruger #1 gun smithing
Bolt problem, marlin 3030  30aw  (Started: Nov. 13 2010, 22:32 ET, Last post: Nov. 13 2010, 22:32 ET)
2nd hammer pin comes out of alignment
Cutting shotgun for removeable chokes  (Started: Oct. 5 2010, 12:52 ET, Last post: Nov. 9 2010, 23:08 ET)
Spas 15 help  (Started: Nov. 6 2010, 11:15 ET, Last post: Nov. 8 2010, 13:25 ET)
Greetings from albania  (Started: Oct. 4 2010, 22:34 ET, Last post: Nov. 2 2010, 04:25 ET)
Bolt handle welding  (Started: Oct. 28 2010, 00:45 ET, Last post: Oct. 28 2010, 16:19 ET)
30-30 headspace gage dimensions  (Started: Oct. 26 2010, 10:51 ET, Last post: Oct. 26 2010, 10:51 ET)
Second question operation needs of my unit  (Started: Oct. 15 2010, 23:08 ET, Last post: Oct. 22 2010, 17:31 ET)
Savage springfield 1875 .22 rifle  (Started: Oct. 21 2010, 19:13 ET, Last post: Oct. 22 2010, 15:23 ET)
Information
? about remington 81 woodsmaster  (Started: Aug. 24 2010, 01:56 ET, Last post: Oct. 17 2010, 18:17 ET)
Shotgun barrel sleeving  (Started: Oct. 14 2010, 10:27 ET, Last post: Oct. 15 2010, 16:46 ET)
Muzzle brake installation  (Started: Oct. 8 2010, 18:01 ET, Last post: Oct. 15 2010, 08:32 ET)
What set up do  you use...
22 black powder pepper box to 22rf  (Started: Oct. 14 2010, 00:18 ET, Last post: Oct. 14 2010, 13:44 ET)
Any ideas
Rifiling large bores  (Started: Sep. 15 2010, 14:26 ET, Last post: Oct. 12 2010, 13:10 ET)
1911 in 7.62x25  (Started: Oct. 11 2010, 10:07 ET, Last post: Oct. 12 2010, 12:22 ET)
Rem. 788 bolt replace  (Started: Oct. 11 2010, 22:48 ET, Last post: Oct. 11 2010, 22:48 ET)
Lathe question  (Started: Oct. 10 2010, 17:48 ET, Last post: Oct. 11 2010, 07:35 ET)
How practical is this?
Reline/sleeve cf barrel  (Started: Oct. 9 2010, 16:14 ET, Last post: Oct. 9 2010, 19:11 ET)
Cz 82 in 7.65x17mm (.32 acp)  problem  (Started: Sep. 24 2010, 17:50 ET, Last post: Oct. 9 2010, 12:41 ET)
Help needed
Feeling stupid  (Started: Oct. 9 2010, 10:46 ET, Last post: Oct. 9 2010, 11:02 ET)
Bedding  (Started: Oct. 5 2010, 01:47 ET, Last post: Oct. 5 2010, 10:12 ET)
Bedding a m70
300 whisper/30-221?  (Started: Aug. 1 2010, 18:01 ET, Last post: Oct. 2 2010, 20:36 ET)
What bullet for 1in 10 twist  (Started: Oct. 2 2010, 10:35 ET, Last post: Oct. 2 2010, 11:28 ET)
Rear axle shaft  (Started: Sep. 29 2010, 11:15 ET, Last post: Oct. 1 2010, 10:25 ET)
What kind of material
Gunsmithing library  (Started: Sep. 22 2010, 16:23 ET, Last post: Sep. 29 2010, 17:33 ET)
What are the best books to start with?
Ak47 style rifle  (Started: Sep. 10 2010, 15:18 ET, Last post: Sep. 29 2010, 10:24 ET)
What would you do with it?
Mr. single shotís gunsmithing idea book  (Started: Sep. 27 2010, 03:31 ET, Last post: Sep. 28 2010, 02:45 ET)
Is it still available
Spear gun power head  (Started: Aug. 18 2010, 19:23 ET, Last post: Sep. 27 2010, 04:51 ET)
Anyone done it before?
Trigger job  (Started: Sep. 23 2010, 08:21 ET, Last post: Sep. 25 2010, 23:09 ET)
M1 garand
Air rifle piston buffer material?  (Started: Sep. 14 2010, 10:08 ET, Last post: Sep. 24 2010, 20:14 ET)
My control panel settings  (Started: Sep. 23 2010, 13:00 ET, Last post: Sep. 23 2010, 13:00 ET)
Loose 6-48 threads  (Started: Sep. 15 2010, 05:00 ET, Last post: Sep. 22 2010, 11:48 ET)
Handi rifle trouble  (Started: Sep. 20 2010, 20:40 ET, Last post: Sep. 20 2010, 22:48 ET)
Light strikes & protruding primers
Posting pictures  (Started: Sep. 14 2010, 10:57 ET, Last post: Sep. 19 2010, 19:02 ET)
M1 garand = parade modification?  (Started: Sep. 11 2010, 23:29 ET, Last post: Sep. 18 2010, 23:36 ET)
How to get it to work as a semi auto
Cleaning filthy and slightly rusty bores  (Started: Sep. 1 2010, 18:19 ET, Last post: Sep. 18 2010, 22:05 ET)
Noble 12 ga. shotgun  (Started: Sep. 16 2010, 22:49 ET, Last post: Sep. 18 2010, 10:43 ET)
Looking for info on noble 560
Luger advice  (Started: Sep. 15 2010, 11:56 ET, Last post: Sep. 17 2010, 16:38 ET)
Jb weld how to color ?  (Started: Aug. 31 2010, 01:09 ET, Last post: Sep. 15 2010, 12:48 ET)
Patent info  (Started: Sep. 14 2010, 10:59 ET, Last post: Sep. 14 2010, 10:59 ET)
.310 shotgun  (Started: Sep. 11 2010, 06:49 ET, Last post: Sep. 11 2010, 17:56 ET)
Has anyone heard of one?
Spring compression weight  (Started: Sep. 6 2010, 11:50 ET, Last post: Sep. 10 2010, 12:06 ET)
How to measure?
Shotgun 410 ga  (Started: Sep. 2 2010, 07:11 ET, Last post: Sep. 9 2010, 22:40 ET)
Short barrel - illegal
Rifling spiral  (Started: Aug. 2 2010, 22:14 ET, Last post: Sep. 7 2010, 07:02 ET)
Variable pitch rifling spiral
Shaping the new soft recoil pads  (Started: Sep. 5 2010, 14:13 ET, Last post: Sep. 5 2010, 20:27 ET)
Question on method
Roller locked action?  (Started: Sep. 4 2010, 15:54 ET, Last post: Sep. 4 2010, 19:35 ET)
Simple green  (Started: Sep. 4 2010, 01:29 ET, Last post: Sep. 4 2010, 12:52 ET)
A question on barrel support/thrust.  (Started: Aug. 31 2010, 05:47 ET, Last post: Sep. 3 2010, 11:13 ET)
In which direction will a barrel thrust?
Stock escutcheno on m1-carbine  (Started: Sep. 2 2010, 16:18 ET, Last post: Sep. 2 2010, 16:56 ET)
How to install
H&k p7  (Started: Sep. 1 2010, 15:21 ET, Last post: Sep. 2 2010, 12:47 ET)
M98 extractor.  (Started: Aug. 3 2010, 02:18 ET, Last post: Aug. 31 2010, 21:21 ET)
Fitting a m98 extractor
Hammer hook 1911 cracked missing  (Started: Aug. 31 2010, 06:34 ET, Last post: Aug. 31 2010, 21:15 ET)
Really rusted screws  (Started: Jul. 29 2010, 12:59 ET, Last post: Aug. 31 2010, 18:53 ET)
S&w mod. 36
Anybody bought from thegunrack.net?  (Started: Aug. 30 2010, 22:30 ET, Last post: Aug. 30 2010, 22:30 ET)
But stock removal  (Started: Aug. 28 2010, 16:05 ET, Last post: Aug. 30 2010, 10:39 ET)
Socket
What steel for o/u 22wmr/410?  (Started: Aug. 24 2010, 08:45 ET, Last post: Aug. 30 2010, 09:44 ET)
.22 ar-alike  (Started: Aug. 24 2010, 13:13 ET, Last post: Aug. 30 2010, 02:01 ET)
Plastic extrusion  (Started: Aug. 25 2010, 00:31 ET, Last post: Aug. 28 2010, 10:19 ET)
Checkering steel  (Started: Jul. 25 2010, 20:10 ET, Last post: Aug. 25 2010, 03:24 ET)
Gimmee ideas
Shotgun counterboring and porting  (Started: Aug. 23 2010, 01:54 ET, Last post: Aug. 23 2010, 19:20 ET)
Does it work or is it hype?
Anybody has information of biathlon rifle?  (Started: Aug. 18 2010, 11:57 ET, Last post: Aug. 21 2010, 00:58 ET)
Biathlon rifle
What would you use for a roller locked action.  (Started: Aug. 15 2010, 20:18 ET, Last post: Aug. 20 2010, 20:47 ET)
Not delayed blowback.
.22 revolver.  just what have i got here?  (Started: Jun. 10 2010, 22:28 ET, Last post: Aug. 20 2010, 05:23 ET)
Hopkins & allen long barrel .22.
Calico 9mm 100 round mag dimensions  (Started: Aug. 12 2010, 03:15 ET, Last post: Aug. 19 2010, 14:41 ET)
New model win 70 trigger job  (Started: Aug. 15 2010, 19:06 ET, Last post: Aug. 15 2010, 19:36 ET)
Stuck nefa .50 cal breech plug  (Started: Aug. 15 2010, 04:09 ET, Last post: Aug. 15 2010, 16:05 ET)
Stuck .50 cal breech plug
Falling block semi auto.  (Started: Aug. 11 2010, 15:53 ET, Last post: Aug. 13 2010, 22:25 ET)
Why not?
Winchester model 88 question. scope mount.  (Started: Aug. 11 2010, 00:33 ET, Last post: Aug. 13 2010, 22:12 ET)
Winchester model 25 fix  (Started: Jul. 29 2010, 22:43 ET, Last post: Aug. 11 2010, 10:11 ET)
Know this gun?
Kahr 45 acp compact  (Started: Aug. 10 2010, 12:15 ET, Last post: Aug. 10 2010, 17:20 ET)
Is there any point to a 'safety lug' on a semi?  (Started: Aug. 8 2010, 14:36 ET, Last post: Aug. 10 2010, 08:43 ET)
Extraction cams  (Started: Aug. 8 2010, 19:06 ET, Last post: Aug. 8 2010, 21:01 ET)
Designing a bolt action
5.7 x 28  (Started: Aug. 1 2010, 18:32 ET, Last post: Aug. 8 2010, 19:31 ET)
Chamber dimensions and bolt weight
Ak gas piston  (Started: Aug. 2 2010, 21:33 ET, Last post: Aug. 7 2010, 12:08 ET)
What material to use?
870 receiver dimension  (Started: Aug. 3 2010, 14:12 ET, Last post: Aug. 3 2010, 14:12 ET)
Tc contender rechamber  (Started: Jul. 27 2010, 10:03 ET, Last post: Jul. 29 2010, 09:32 ET)
30-30 to 30-40 krag rechamber
M14  (Started: Jul. 7 2010, 12:02 ET, Last post: Jul. 27 2010, 10:14 ET)
Falling out ??
Stones for honing  (Started: Jul. 24 2010, 20:26 ET, Last post: Jul. 25 2010, 10:29 ET)
What grits
Bhp blueprints?  (Started: Jun. 5 2010, 22:32 ET, Last post: Jul. 23 2010, 19:04 ET)
Rossi 62  (Started: Jul. 19 2010, 11:21 ET, Last post: Jul. 23 2010, 15:56 ET)
Loading problems
Which bolt-action for g3 mag conversion?  (Started: Jul. 21 2010, 12:23 ET, Last post: Jul. 23 2010, 13:14 ET)
Chamber depth?  (Started: Jul. 20 2010, 23:06 ET, Last post: Jul. 21 2010, 19:17 ET)
Gantry crane for shop  (Started: Jul. 13 2010, 15:24 ET, Last post: Jul. 14 2010, 21:21 ET)
Engineering help needed
Any m 14 gurus out there?  (Started: Jul. 10 2010, 11:58 ET, Last post: Jul. 12 2010, 17:41 ET)
Gas checks/grenade launch mode
Mauser 98 magazine fed conversion  (Started: Jul. 7 2010, 22:04 ET, Last post: Jul. 11 2010, 01:20 ET)
Thompson smg bolt question.  (Started: Jul. 9 2010, 02:59 ET, Last post: Jul. 9 2010, 13:22 ET)
Colt 1911 specification questions??  (Started: Jul. 6 2010, 12:36 ET, Last post: Jul. 9 2010, 10:19 ET)
Repairing a .410 barrel  (Started: Jul. 5 2010, 17:52 ET, Last post: Jul. 7 2010, 00:08 ET)
Strength of s7  (Started: Jun. 27 2010, 04:49 ET, Last post: Jul. 4 2010, 21:31 ET)
Winchester 100 problem  (Started: Jul. 2 2010, 20:14 ET, Last post: Jul. 4 2010, 21:15 ET)
Who did 223/224/6mm jackets from 22lr brass  (Started: Jul. 2 2010, 05:40 ET, Last post: Jul. 4 2010, 17:43 ET)
How did you do it
Drill for rough cutting chamber  (Started: Jun. 25 2010, 21:29 ET, Last post: Jul. 4 2010, 15:29 ET)
Rpk type kits?  (Started: Jul. 3 2010, 04:52 ET, Last post: Jul. 3 2010, 13:08 ET)
A question about ak47 kits  (Started: Jul. 1 2010, 13:04 ET, Last post: Jul. 2 2010, 17:06 ET)
What is included in the trigger group?
Micarta revolver  (Started: Jun. 23 2010, 09:44 ET, Last post: Jul. 2 2010, 11:18 ET)
Aiming ejected brass.  (Started: Jun. 26 2010, 02:28 ET, Last post: Jul. 2 2010, 07:07 ET)
Can it be done?
.22 magazine speed loader  (Started: Jun. 1 2010, 18:29 ET, Last post: Jun. 29 2010, 10:08 ET)
Anyone here ever try one of these?
Hollow milling cutter  (Started: Jun. 12 2010, 08:35 ET, Last post: Jun. 27 2010, 14:31 ET)
8620 is this a good gun steel  (Started: Jun. 26 2010, 12:58 ET, Last post: Jun. 26 2010, 23:24 ET)
Tig welders  (Started: Jun. 5 2010, 09:05 ET, Last post: Jun. 23 2010, 03:24 ET)
Which one to use for gunsmithing
Receiver materials/strengths  (Started: Jun. 22 2010, 19:08 ET, Last post: Jun. 23 2010, 01:28 ET)
Savage 25 firing pin problem  (Started: Jun. 20 2010, 23:52 ET, Last post: Jun. 22 2010, 12:50 ET)
Looking for a revolver plans  (Started: Jun. 21 2010, 09:16 ET, Last post: Jun. 21 2010, 16:08 ET)
A revolver build topic would be useful
Rifling with a standard reamer  (Started: Jun. 9 2010, 16:56 ET, Last post: Jun. 20 2010, 17:38 ET)
Question about a possible rifling method
Square holes stronger?  (Started: Jan. 3 2010, 13:07 ET, Last post: Jun. 12 2010, 17:50 ET)
Looking for scratch built ar15 thred  (Started: Mar. 3 2010, 14:39 ET, Last post: Jun. 12 2010, 17:08 ET)
50 bmg recievers  (Started: Jan. 7 2010, 08:37 ET, Last post: Jun. 12 2010, 11:43 ET)
Is it feasible to build a 50 bmg on any
Machining heat treated steel  (Started: May 20 2010, 15:40 ET, Last post: Jun. 11 2010, 22:01 ET)
Whats the best way to go
Double barrel belgian twist frame - use it?  (Started: Jun. 9 2010, 01:38 ET, Last post: Jun. 10 2010, 21:44 ET)
Potential project involving one
Homemade recoil pad spacers  (Started: Jun. 8 2010, 02:53 ET, Last post: Jun. 10 2010, 21:42 ET)
What am i missing here?  (Started: Jun. 4 2010, 01:42 ET, Last post: Jun. 4 2010, 23:03 ET)
Bill holmes trigger group question.
Best way to remove metal...  (Started: May 22 2010, 16:37 ET, Last post: May 31 2010, 18:54 ET)
Lots and lots of metal
Old revolver function question  (Started: Apr. 4 2010, 10:28 ET, Last post: May 31 2010, 16:33 ET)
Importing a tar-21 from canada  (Started: May 24 2010, 12:33 ET, Last post: May 31 2010, 15:09 ET)
Handi rifle trouble  (Started: May 31 2010, 00:59 ET, Last post: May 31 2010, 11:45 ET)
Hammer won't go to cocked position
Viability of concept: input needed  (Started: May 26 2010, 20:19 ET, Last post: May 30 2010, 15:06 ET)
Conversion of single shot rifle to ml
Threading a 50 cal bmg barrel  (Started: May 26 2010, 16:11 ET, Last post: May 30 2010, 14:55 ET)
How long should the shank be
The c96 pistol  (Started: Mar. 23 2010, 13:29 ET, Last post: May 27 2010, 10:35 ET)
6mm headspace...  (Started: May 24 2010, 22:20 ET, Last post: May 26 2010, 14:48 ET)
Headspace guages
Pps 43  (Started: May 24 2010, 20:01 ET, Last post: May 25 2010, 08:28 ET)
Barrel link taking recoil  (Started: Apr. 6 2010, 03:00 ET, Last post: May 24 2010, 20:29 ET)
A 1911 question
Remington grip cap removal?  (Started: May 3 2010, 00:52 ET, Last post: May 24 2010, 01:33 ET)
Dan wesson 15 fixed barrel  (Started: May 14 2010, 10:44 ET, Last post: May 24 2010, 01:16 ET)
How does a smith remove the barrel
Cutting 1903 springfield barrel threads  (Started: May 15 2010, 15:49 ET, Last post: May 24 2010, 00:48 ET)
Xs sight removal  (Started: May 21 2010, 16:15 ET, Last post: May 24 2010, 00:34 ET)
416 steel  (Started: May 17 2010, 13:31 ET, Last post: May 20 2010, 16:55 ET)
Reamer with threads?!!!!  (Started: May 6 2010, 19:34 ET, Last post: May 19 2010, 17:21 ET)
Seen a chambering reamer with threads?!!
Old 1919 type crosshair sights?  (Started: May 18 2010, 03:26 ET, Last post: May 19 2010, 12:19 ET)
Inletting choate stock  (Started: May 15 2010, 11:16 ET, Last post: May 18 2010, 23:10 ET)
Ii istar modelo super  (Started: Mar. 12 2010, 23:16 ET, Last post: May 17 2010, 22:33 ET)
Reline 9mm largo barel to .30 mauser
Detachable magazine mod for model 70 winchester  (Started: May 13 2010, 16:37 ET, Last post: May 17 2010, 15:04 ET)
Any plans?
Rework a french mas 1936 rifle before?  (Started: May 10 2010, 17:29 ET, Last post: May 15 2010, 14:31 ET)
Why not make it look yonger (modern)
Rossi sa .22 cal single shot  (Started: May 13 2010, 14:08 ET, Last post: May 14 2010, 08:42 ET)
Front and rear sights missing
.223/556 target gun chamber  (Started: Apr. 6 2010, 07:47 ET, Last post: May 12 2010, 19:32 ET)
What reamer?
Winchester 1895  (Started: May 10 2010, 08:14 ET, Last post: May 12 2010, 16:21 ET)
Looks like a crack
.177 and .22 rifling  (Started: May 1 2010, 04:38 ET, Last post: May 11 2010, 23:36 ET)
Goldcoast 30.06 98 action  (Started: May 11 2010, 19:54 ET, Last post: May 11 2010, 19:54 ET)
What stock will fit this ?
Anyone re barrel an m1a?  (Started: Feb. 27 2010, 21:12 ET, Last post: May 10 2010, 12:10 ET)
Oil can oiler for a lathe?  (Started: Feb. 24 2010, 10:05 ET, Last post: May 9 2010, 22:27 ET)
Single shot follower in a 700 rem.  (Started: May 8 2010, 21:44 ET, Last post: May 9 2010, 09:01 ET)
Double gun question  (Started: May 6 2010, 15:39 ET, Last post: May 7 2010, 22:04 ET)
Parallel or perpendicular
Converting a barrel to slightly different caliber  (Started: Apr. 23 2010, 02:20 ET, Last post: May 7 2010, 17:58 ET)
Doable?  or need work?
What steel to use for an o/u 12 shotgun receiver?  (Started: Apr. 26 2010, 18:59 ET, Last post: May 5 2010, 23:16 ET)
Steel to build a receiver
Paper cartridges  (Started: Apr. 28 2010, 23:07 ET, Last post: Apr. 29 2010, 11:52 ET)
Designing a qcb tactical rifle  (Started: Apr. 27 2010, 16:23 ET, Last post: Apr. 28 2010, 23:13 ET)
Stevens model 512 goldwing  (Started: Apr. 27 2010, 21:29 ET, Last post: Apr. 27 2010, 21:29 ET)
Trigger pull
1851 navy  (Started: Apr. 22 2010, 12:23 ET, Last post: Apr. 26 2010, 14:49 ET)
Hammer and disconnector design  (Started: Apr. 25 2010, 16:34 ET, Last post: Apr. 25 2010, 17:49 ET)
Pmr-30 style hybrid locked/direct blowback?  (Started: Apr. 17 2010, 20:29 ET, Last post: Apr. 22 2010, 13:23 ET)
Anything like this been tried before?
What size thread is on a browning m2 barrel?  (Started: Apr. 18 2010, 14:58 ET, Last post: Apr. 20 2010, 12:37 ET)
Dpms stuck safty  (Started: Apr. 19 2010, 21:59 ET, Last post: Apr. 20 2010, 04:31 ET)
Skeet barrel for beretta al2  (Started: Apr. 14 2010, 13:20 ET, Last post: Apr. 18 2010, 12:56 ET)
Source for used barrels or new ones
Zimmerstutzen rifle  (Started: Mar. 8 2010, 00:20 ET, Last post: Apr. 17 2010, 00:20 ET)
Rossi 92 action job with problems  (Started: Apr. 12 2010, 19:58 ET, Last post: Apr. 15 2010, 14:30 ET)
What stops the barrel from moving?  (Started: Apr. 11 2010, 00:05 ET, Last post: Apr. 14 2010, 16:27 ET)
Suggestions for butt pad material  (Started: Apr. 7 2010, 00:30 ET, Last post: Apr. 14 2010, 00:19 ET)
Manual /schematics  (Started: Apr. 13 2010, 16:08 ET, Last post: Apr. 13 2010, 22:37 ET)
P beretta al2 and franchi 612 vs
Barrel torque  (Started: Apr. 12 2010, 12:47 ET, Last post: Apr. 12 2010, 13:01 ET)
Commando mark iii  45acp thompson look alike  (Started: Apr. 9 2010, 09:56 ET, Last post: Apr. 12 2010, 07:21 ET)
Drill bit size for 1-1/16 x 16tpi tap  (Started: Apr. 5 2010, 15:50 ET, Last post: Apr. 8 2010, 01:14 ET)
What do i need
Recycling hardware store grade 5/8 hardened bolts  (Started: Apr. 4 2010, 02:12 ET, Last post: Apr. 5 2010, 18:32 ET)
Can these be annealed and rehardened?
Hi-point grips, where to get?  or how to mod?  (Started: Mar. 28 2010, 23:14 ET, Last post: Apr. 4 2010, 22:36 ET)
No, not for me, my older kid traded.
Remington 700 action drawings  (Started: Apr. 3 2010, 11:20 ET, Last post: Apr. 4 2010, 14:12 ET)
Stain or acraglass first?  (Started: Mar. 26 2010, 09:33 ET, Last post: Apr. 3 2010, 23:58 ET)
Trigger bloc assembly identification.  (Started: Mar. 21 2010, 19:33 ET, Last post: Apr. 3 2010, 18:01 ET)
Thompson upper and lower  (Started: Mar. 26 2010, 20:07 ET, Last post: Apr. 3 2010, 15:05 ET)
Material compatability
Looking for fal receiver wrench blueprint  (Started: Mar. 31 2010, 12:19 ET, Last post: Apr. 2 2010, 21:07 ET)
Which type walnut for new rifle stock  (Started: Mar. 25 2010, 00:49 ET, Last post: Mar. 31 2010, 12:16 ET)
Cold rolled steel for jaco derringer?  (Started: Mar. 29 2010, 07:54 ET, Last post: Mar. 31 2010, 10:48 ET)
Having trouble getting hold of 4140
Blowback .223 carbine  (Started: Mar. 8 2010, 04:55 ET, Last post: Mar. 29 2010, 22:08 ET)
Is this a bad idea?
Scopes on airguns  (Started: Mar. 27 2010, 14:17 ET, Last post: Mar. 29 2010, 00:35 ET)
How to keep them from destruction?
Rem 700 bolt handle on mauser action  (Started: Mar. 26 2010, 12:35 ET, Last post: Mar. 28 2010, 17:46 ET)
Inerarms virginian .44  (Started: Nov. 21 2009, 16:19 ET, Last post: Mar. 27 2010, 19:55 ET)
Soldering bolt handle  (Started: Mar. 25 2010, 13:02 ET, Last post: Mar. 26 2010, 09:50 ET)
S&w topbreak  (Started: May 5 2007, 04:52 ET, Last post: Mar. 24 2010, 08:22 ET)
Scheamatic for old revolver
Ar10 bot dimension ??  (Started: Mar. 23 2010, 09:02 ET, Last post: Mar. 23 2010, 09:02 ET)
Converting colt ar-22 up to 5.56  (Started: Mar. 11 2010, 23:55 ET, Last post: Mar. 19 2010, 23:12 ET)
Tube guns with minimal tools...?  (Started: Mar. 13 2010, 03:34 ET, Last post: Mar. 19 2010, 04:13 ET)
Removing rear sight from tc contender  (Started: Mar. 18 2010, 17:40 ET, Last post: Mar. 18 2010, 23:06 ET)
Technical notes:small arms design  (Started: Nov. 27 2009, 12:39 ET, Last post: Mar. 17 2010, 22:52 ET)
7.62 nagant revolver  (Started: Mar. 14 2010, 21:27 ET, Last post: Mar. 15 2010, 22:15 ET)
Recoil operated semi auto 12 gage  (Started: Mar. 14 2010, 23:58 ET, Last post: Mar. 15 2010, 21:59 ET)
Such a thing exist???
Savage 99  (Started: Mar. 2 2010, 18:09 ET, Last post: Mar. 15 2010, 12:11 ET)
Rotary magazine
Brutus denali barrel.  (Started: Mar. 12 2010, 20:42 ET, Last post: Mar. 13 2010, 13:59 ET)
Heat treating question  (Started: Feb. 8 2010, 20:22 ET, Last post: Mar. 11 2010, 18:36 ET)
Tap broke
Rolling block build  (Started: Mar. 11 2010, 03:21 ET, Last post: Mar. 11 2010, 18:21 ET)
Constructing a rolling block
Talon derringer  (Started: Mar. 11 2010, 09:45 ET, Last post: Mar. 11 2010, 09:45 ET)
7.62-54r to .303  (Started: Feb. 11 2010, 14:24 ET, Last post: Mar. 10 2010, 21:59 ET)
Any problems?
S&w 52  (Started: Mar. 3 2010, 08:10 ET, Last post: Mar. 10 2010, 12:33 ET)
Search for a replacement barrel
Semi automatic open bolt fixed firing pin mech  (Started: Jan. 14 2010, 21:33 ET, Last post: Mar. 8 2010, 13:45 ET)
Does it exist?
Broach question  (Started: Mar. 6 2010, 12:08 ET, Last post: Mar. 6 2010, 20:59 ET)
Measurements don't add up.
Harder barrel question  (Started: Mar. 5 2010, 22:53 ET, Last post: Mar. 6 2010, 16:34 ET)
.475 barrel?
Cane gun ?  (Started: Mar. 3 2010, 06:53 ET, Last post: Mar. 4 2010, 14:44 ET)
Adapter for german 26.5mm flare gun?  (Started: Feb. 27 2010, 11:59 ET, Last post: Mar. 2 2010, 11:02 ET)
.375 barrels  (Started: Feb. 28 2010, 21:03 ET, Last post: Mar. 1 2010, 20:26 ET)
Who has cheap
Scope base profiling/contouring  (Started: Mar. 1 2010, 11:36 ET, Last post: Mar. 1 2010, 13:27 ET)
Need some help
Colt hbar gas block?  (Started: Feb. 23 2010, 22:29 ET, Last post: Feb. 28 2010, 11:54 ET)
Berretta 92 safety removal  (Started: Feb. 16 2010, 08:58 ET, Last post: Feb. 28 2010, 09:07 ET)
How to
M1876 krag-petersson  (Started: Feb. 25 2010, 01:03 ET, Last post: Feb. 27 2010, 22:15 ET)
How does it work?
Hot bluing question  (Started: Feb. 27 2010, 00:47 ET, Last post: Feb. 27 2010, 21:34 ET)
Finishing reamer question  (Started: Feb. 22 2010, 09:51 ET, Last post: Feb. 25 2010, 18:47 ET)
Use for dummies. lol
Prehard 4140  (Started: Feb. 20 2010, 11:51 ET, Last post: Feb. 22 2010, 22:37 ET)
Where to get it ???
Welded barrel question  (Started: Feb. 21 2010, 20:27 ET, Last post: Feb. 22 2010, 20:57 ET)
Shotgun sleeve  (Started: Feb. 22 2010, 18:25 ET, Last post: Feb. 22 2010, 18:25 ET)
Oilsoaked gunstock  (Started: Feb. 13 2010, 12:20 ET, Last post: Feb. 22 2010, 14:38 ET)
Removing oil
Lathe toolbits, best steel?  (Started: Feb. 14 2010, 18:28 ET, Last post: Feb. 21 2010, 17:19 ET)
Best material for tool bits
Ak side scope mount installation  (Started: Feb. 16 2010, 10:02 ET, Last post: Feb. 19 2010, 01:09 ET)
Drill and tap? or rivot?
Need help!!  (Started: Feb. 14 2010, 23:23 ET, Last post: Feb. 15 2010, 11:49 ET)
.303 to 7.62x25  (Started: Dec. 26 2009, 22:31 ET, Last post: Feb. 11 2010, 00:01 ET)
Steps to finish this mauser casting  (Started: Feb. 9 2010, 11:50 ET, Last post: Feb. 10 2010, 07:25 ET)
What determines gas port diameter on barrel  (Started: Jan. 28 2010, 17:43 ET, Last post: Feb. 8 2010, 16:20 ET)
Headspace for 9mm pps43  (Started: Feb. 7 2010, 17:42 ET, Last post: Feb. 7 2010, 23:25 ET)
Bedding a stock  (Started: Jan. 31 2010, 15:40 ET, Last post: Feb. 6 2010, 23:10 ET)
Bedding hammer fordged barrel
Rem 700 long action rebuild  (Started: Feb. 4 2010, 09:49 ET, Last post: Feb. 5 2010, 09:25 ET)
700 rebuild for diff caliber
Can anyone tell me how this pistol operates?  (Started: Feb. 1 2010, 14:05 ET, Last post: Feb. 4 2010, 20:51 ET)
Picatinny rail clamp prints?  (Started: Feb. 3 2010, 02:38 ET, Last post: Feb. 3 2010, 18:18 ET)
Ak under folder removed, need help!!  (Started: Jan. 10 2010, 19:01 ET, Last post: Feb. 3 2010, 10:13 ET)
Hk g3/91  (Started: Jan. 25 2010, 14:44 ET, Last post: Feb. 3 2010, 05:43 ET)
Shaping flat reciver
Savage westpoint model 167 20 ga.  (Started: Feb. 2 2010, 22:28 ET, Last post: Feb. 2 2010, 22:28 ET)
Headspace questions  (Started: Feb. 1 2010, 00:24 ET, Last post: Feb. 1 2010, 13:31 ET)
Ar 15 a2 rear sight mods  (Started: Jan. 27 2010, 11:52 ET, Last post: Feb. 1 2010, 11:43 ET)
Pipe burners ???  (Started: Jan. 30 2010, 20:44 ET, Last post: Jan. 31 2010, 23:35 ET)
Action dimensions question  (Started: Jan. 31 2010, 21:43 ET, Last post: Jan. 31 2010, 21:43 ET)
Remington sp 10 shotgun  (Started: Jan. 26 2010, 16:43 ET, Last post: Jan. 26 2010, 18:30 ET)
How do i polish 1911 breech face...?  (Started: Jan. 14 2010, 14:03 ET, Last post: Jan. 25 2010, 15:08 ET)
Brand new caspian slide "in the white"
Smg design question  (Started: Jan. 20 2010, 12:54 ET, Last post: Jan. 25 2010, 07:08 ET)
What is safe depth for fluting.  (Started: Dec. 29 2009, 12:39 ET, Last post: Jan. 25 2010, 02:55 ET)
I want to flute a barrel but be safe
Help me flush out an idea. "optical sght"  (Started: Jan. 23 2010, 09:13 ET, Last post: Jan. 23 2010, 15:19 ET)
Elevation adjustable mount for red dot.
Nagant revolver conversion  (Started: Jan. 21 2010, 20:11 ET, Last post: Jan. 21 2010, 22:41 ET)
What kind of metal is it?  (Started: Dec. 18 2009, 14:14 ET, Last post: Jan. 21 2010, 16:42 ET)
K-31 and vz-58
Dent in shotgun barrel  (Started: Jan. 18 2010, 22:17 ET, Last post: Jan. 21 2010, 15:45 ET)
Repair
Guru ?  (Started: Jan. 16 2010, 02:20 ET, Last post: Jan. 20 2010, 13:32 ET)
Savage 24: rechamber 22lr to 22mag?  (Started: Jan. 16 2010, 08:54 ET, Last post: Jan. 18 2010, 19:48 ET)
I need some guru help!
Leaf backsights  (Started: Jan. 17 2010, 13:45 ET, Last post: Jan. 18 2010, 14:04 ET)
Folding leaf fabrication
Savage model 101 info needed  (Started: Jan. 18 2010, 07:35 ET, Last post: Jan. 18 2010, 07:35 ET)
Shotgun info  (Started: Jan. 16 2010, 11:33 ET, Last post: Jan. 16 2010, 13:29 ET)
Detachable magazine kit for remington  (Started: Jan. 11 2010, 20:27 ET, Last post: Jan. 15 2010, 23:50 ET)
Rifle chamber  (Started: Jan. 14 2010, 18:56 ET, Last post: Jan. 15 2010, 15:39 ET)
Help, with regminton pietta  (Started: Jan. 15 2010, 09:03 ET, Last post: Jan. 15 2010, 09:03 ET)
Anealing alu. flashing  (Started: Dec. 31 2009, 21:22 ET, Last post: Jan. 10 2010, 00:32 ET)
Ithaca mag 10  (Started: Dec. 28 2009, 15:20 ET, Last post: Jan. 9 2010, 13:37 ET)
Loading issue
.45 cc weapon  (Started: Dec. 18 2009, 00:15 ET, Last post: Jan. 8 2010, 18:35 ET)
Mini 1911's
Wtk: rockwell hardness on noc castings?  (Started: Jan. 2 2010, 21:06 ET, Last post: Jan. 7 2010, 00:38 ET)
Quick take down barrel trunnion assem.  (Started: Jan. 5 2010, 13:09 ET, Last post: Jan. 6 2010, 14:11 ET)
For pistol cals.
Any info on what this pistol is?  (Started: Dec. 31 2009, 15:48 ET, Last post: Jan. 5 2010, 18:46 ET)
Can anyone name it?
How strong are the romanian 26.5mm flare pistol  (Started: Jan. 3 2010, 21:41 ET, Last post: Jan. 3 2010, 21:49 ET)
Muzzle flash hider  (Started: Jan. 2 2010, 23:44 ET, Last post: Jan. 3 2010, 19:18 ET)
Why does it work
Another queston on alu.  (Started: Jan. 2 2010, 00:45 ET, Last post: Jan. 2 2010, 17:20 ET)
Stevens o/u  (Started: Dec. 31 2009, 10:26 ET, Last post: Jan. 1 2010, 21:46 ET)
What happens if you put metal in liquid co2?  (Started: Nov. 27 2009, 14:33 ET, Last post: Jan. 1 2010, 21:16 ET)
Can you do some psudo cryo treattment?
St 37 2 steel for 9mm guns ?  (Started: Dec. 28 2009, 14:06 ET, Last post: Jan. 1 2010, 13:57 ET)
Tommygun question  (Started: Dec. 29 2009, 20:15 ET, Last post: Dec. 31 2009, 15:28 ET)
Pump .22lr plans  (Started: Dec. 19 2009, 00:48 ET, Last post: Dec. 29 2009, 22:52 ET)
Workable design or scrap paper?
Romanian 75 round drum mag  (Started: Dec. 23 2009, 12:51 ET, Last post: Dec. 24 2009, 14:35 ET)
76 rounds in a 75 round drum
Drum mag wobble --- problem solved!  (Started: Dec. 24 2009, 12:27 ET, Last post: Dec. 24 2009, 13:09 ET)
How to remove wobble
Machinable wax  (Started: Dec. 7 2009, 02:02 ET, Last post: Dec. 24 2009, 09:37 ET)
Anyone here ever use it?
Romanian 75 round drum mag  (Started: Dec. 23 2009, 19:26 ET, Last post: Dec. 23 2009, 22:38 ET)
Clerification
Ak drum mag wobble  (Started: Dec. 22 2009, 02:20 ET, Last post: Dec. 22 2009, 09:53 ET)
Ak drum mag wobble
Ak-47 underfold template  (Started: Dec. 21 2009, 21:32 ET, Last post: Dec. 21 2009, 23:45 ET)
Underfold template
Polymer wrapped rifle barrels  (Started: Dec. 11 2009, 10:24 ET, Last post: Dec. 21 2009, 10:00 ET)
Looking for a source for polymer barrels
Revolvers  (Started: Dec. 3 2009, 22:14 ET, Last post: Dec. 20 2009, 20:49 ET)
Break-top!
Ruger no1 45-70 question  (Started: Dec. 14 2009, 20:30 ET, Last post: Dec. 18 2009, 17:50 ET)
Rebarrel q win 62a .22 lr  (Started: Dec. 9 2009, 21:31 ET, Last post: Dec. 14 2009, 23:34 ET)
M2hb threads  (Started: Dec. 12 2009, 01:38 ET, Last post: Dec. 14 2009, 16:29 ET)
Can i use low carbon steel instead of 7075 alu  (Started: Dec. 10 2009, 15:39 ET, Last post: Dec. 14 2009, 15:37 ET)
Henry martini barrel thread  (Started: Dec. 6 2009, 14:58 ET, Last post: Dec. 13 2009, 10:45 ET)
My "Liberator" Idea  (Started: Dec. 10 2009, 01:12 ET, Last post: Dec. 12 2009, 17:49 ET)
Bolt lugs  (Started: Dec. 7 2009, 15:00 ET, Last post: Dec. 10 2009, 20:51 ET)
Worn bolt lugs
Cz 82 †makarov  (Started: Nov. 23 2009, 18:04 ET, Last post: Dec. 7 2009, 17:07 ET)
To buy or not to buy?
Improving the chamber on a .223 howa  (Started: Dec. 6 2009, 10:27 ET, Last post: Dec. 6 2009, 20:59 ET)
How can i make it into a .223 wylde?
Receiver work  (Started: Dec. 4 2009, 14:28 ET, Last post: Dec. 6 2009, 13:59 ET)
Receiver nick
Converting 22 to 22 mag  (Started: Nov. 29 2009, 14:38 ET, Last post: Dec. 5 2009, 11:10 ET)
Question about roughing reamers  (Started: Dec. 1 2009, 15:05 ET, Last post: Dec. 2 2009, 00:40 ET)
M1 carbine slide stop spring  (Started: Nov. 24 2009, 09:59 ET, Last post: Nov. 30 2009, 21:23 ET)
Wtk: pressures generated by 30mm?  (Started: Oct. 8 2009, 23:24 ET, Last post: Nov. 30 2009, 17:31 ET)
30x100 - 30x113 straight wall cases
Rechambering a barreled action  (Started: Nov. 24 2009, 05:26 ET, Last post: Nov. 30 2009, 15:57 ET)
Bad idea or old news?
How are marlin takedown rifles designed?  (Started: Nov. 26 2009, 22:16 ET, Last post: Nov. 29 2009, 02:00 ET)
Is it possible to make a takedown?
Re-barreling an m-1  (Started: Jun. 30 2009, 15:24 ET, Last post: Nov. 27 2009, 14:15 ET)
Multiple installations?
Parker hale midland 2100  (Started: Aug. 4 2009, 07:36 ET, Last post: Nov. 26 2009, 20:56 ET)
Bolt question
Winchester x2 safety  (Started: Nov. 23 2009, 19:04 ET, Last post: Nov. 26 2009, 15:20 ET)
How to smooth out the safety and quieten
Converting a non-choked shotgun barrel.  (Started: Nov. 22 2009, 08:17 ET, Last post: Nov. 26 2009, 14:59 ET)
How can i do it?
Cocking piece  (Started: Nov. 24 2009, 21:18 ET, Last post: Nov. 26 2009, 00:07 ET)
Brno 21
Winchester super x2 safety replacment  (Started: Nov. 24 2009, 23:10 ET, Last post: Nov. 24 2009, 23:10 ET)
Want to rplace oem with a smooth safety
Possible/safe to put a 10" barrel extension on?  (Started: Nov. 23 2009, 17:17 ET, Last post: Nov. 23 2009, 21:05 ET)
Welding an ak-47 laser cut stamping...  (Started: Nov. 22 2009, 11:36 ET, Last post: Nov. 22 2009, 12:08 ET)
Ak 47 receiver welds
Jaco 22 derringer question  (Started: Nov. 18 2009, 22:02 ET, Last post: Nov. 19 2009, 14:50 ET)
Recoil pad removal, kleinguenther rifle  (Started: Nov. 18 2009, 10:47 ET, Last post: Nov. 19 2009, 14:38 ET)
How to remove recoil pad?
Any pics or descriptions of how set triggers work?  (Started: Nov. 6 2009, 14:09 ET, Last post: Nov. 17 2009, 17:55 ET)
Single or double...
Gunsmithing as a career...  (Started: Nov. 14 2009, 10:59 ET, Last post: Nov. 14 2009, 21:55 ET)
Small derringer hump?  (Started: Nov. 13 2009, 00:59 ET, Last post: Nov. 14 2009, 00:43 ET)
What is it?
Swedisg blind magazine stock  (Started: Nov. 13 2009, 10:12 ET, Last post: Nov. 13 2009, 16:22 ET)
A question about chamber all thickness.  (Started: Nov. 11 2009, 03:27 ET, Last post: Nov. 13 2009, 13:51 ET)
Does a thread on barrel extension count?
Welding dust cover detents  (Started: Nov. 1 2009, 19:25 ET, Last post: Nov. 11 2009, 14:25 ET)
Siamese mauser
Remington 760, replacement barrel  (Started: Nov. 7 2009, 22:25 ET, Last post: Nov. 9 2009, 14:50 ET)
Need to find
Side by side rifle question  (Started: Nov. 2 2009, 21:16 ET, Last post: Nov. 6 2009, 11:19 ET)
What holds the breech to gather??
Kroil  (Started: Oct. 21 2009, 19:53 ET, Last post: Nov. 5 2009, 23:08 ET)
Barrel shank size  (Started: Nov. 1 2009, 15:37 ET, Last post: Nov. 1 2009, 21:50 ET)
Diameter, threads, length of shank
Draw filing  (Started: Oct. 24 2009, 13:00 ET, Last post: Oct. 30 2009, 10:18 ET)
How to?
Imi timberwolf locking  (Started: Oct. 30 2009, 08:20 ET, Last post: Oct. 30 2009, 08:20 ET)
How does it lock?
What exactly makes something a 'rivet'  (Started: Oct. 13 2009, 11:58 ET, Last post: Oct. 29 2009, 11:30 ET)
In regards to weapons.
Avg cost to thread a barrel ?  (Started: Oct. 25 2009, 19:16 ET, Last post: Oct. 26 2009, 13:12 ET)
I had an idea..... and it hurt like the dickens  (Started: Oct. 23 2009, 23:53 ET, Last post: Oct. 25 2009, 16:57 ET)
Book recommendation  (Started: Oct. 24 2009, 19:55 ET, Last post: Oct. 25 2009, 16:40 ET)
Barrel stubs for destructive testing?  (Started: Oct. 21 2009, 12:31 ET, Last post: Oct. 23 2009, 20:04 ET)
Legal and technical question.
Hardness testing files?  (Started: Oct. 23 2009, 00:51 ET, Last post: Oct. 23 2009, 16:03 ET)
Can you make your own or just $$$?
Stuck/seized choke  (Started: Oct. 1 2009, 07:16 ET, Last post: Oct. 22 2009, 21:36 ET)
Shotgun chamber gauges  (Started: Oct. 21 2009, 07:34 ET, Last post: Oct. 21 2009, 08:56 ET)
Dimentions?
Shotgun problems  (Started: Sep. 7 2009, 12:03 ET, Last post: Oct. 21 2009, 07:32 ET)
Remington model 10 takedown
Portaband question  (Started: Aug. 6 2009, 03:26 ET, Last post: Oct. 21 2009, 03:11 ET)
Damaged 243 chamber  (Started: Oct. 17 2009, 17:42 ET, Last post: Oct. 20 2009, 19:22 ET)
Tapered gas piston?  (Started: Oct. 19 2009, 11:09 ET, Last post: Oct. 20 2009, 18:21 ET)
Anyone?
Mak90 feeding problem  (Started: Oct. 19 2009, 11:45 ET, Last post: Oct. 20 2009, 13:33 ET)
Bolt for rem. 700  (Started: Oct. 6 2009, 01:54 ET, Last post: Oct. 18 2009, 18:15 ET)
Info
Please help.  (Started: Oct. 15 2009, 14:32 ET, Last post: Oct. 18 2009, 18:12 ET)
316 silencer question
270 win barrel life  (Started: Oct. 14 2009, 12:50 ET, Last post: Oct. 17 2009, 16:40 ET)
Questions about ruger mk  (Started: Oct. 16 2009, 05:48 ET, Last post: Oct. 16 2009, 05:48 ET)
Ruger rimefire
.44-40 chamber wall thickness  (Started: Sep. 26 2009, 05:36 ET, Last post: Oct. 15 2009, 22:55 ET)
Powder coating  (Started: Oct. 14 2009, 15:03 ET, Last post: Oct. 15 2009, 13:40 ET)
Powder coating gun parts
Rifling cutter head  (Started: Oct. 10 2009, 10:46 ET, Last post: Oct. 13 2009, 17:31 ET)
Hook angles?
Lapping a bore before rifling?  (Started: Oct. 10 2009, 14:27 ET, Last post: Oct. 13 2009, 12:02 ET)
Durability of anodizing at high temps  (Started: Oct. 9 2009, 09:20 ET, Last post: Oct. 9 2009, 18:12 ET)
Steyr mannlicher model m luxus parts  (Started: Oct. 9 2009, 14:11 ET, Last post: Oct. 9 2009, 14:11 ET)
Where to get parts for this model rifle
Browning citori trigger guard is loose  (Started: Oct. 8 2009, 21:59 ET, Last post: Oct. 8 2009, 21:59 ET)
Bill holme's original ar-15 design  (Started: Oct. 7 2009, 15:29 ET, Last post: Oct. 8 2009, 21:39 ET)
Squared tube
9mm carbine : usable barrel length ?  (Started: Oct. 5 2009, 15:42 ET, Last post: Oct. 8 2009, 14:14 ET)
40 caliber brass,  (Started: Oct. 6 2009, 12:05 ET, Last post: Oct. 6 2009, 18:17 ET)
Need to move a barrel lug on a shotgun  (Started: Sep. 28 2009, 09:57 ET, Last post: Oct. 6 2009, 16:59 ET)
Hi-power  (Started: Sep. 21 2009, 14:06 ET, Last post: Oct. 6 2009, 12:00 ET)
Parts sources
Century arms ak 47  (Started: Oct. 5 2009, 19:25 ET, Last post: Oct. 6 2009, 11:55 ET)
Barrel makers speak up!  (Started: Oct. 3 2009, 17:59 ET, Last post: Oct. 4 2009, 14:15 ET)
'scraper' cutter style?
Where to get sleeveing material for barrel liner  (Started: Oct. 3 2009, 13:11 ET, Last post: Oct. 3 2009, 13:51 ET)
Can anyone tell me what stock this is?  (Started: Sep. 29 2009, 00:44 ET, Last post: Oct. 1 2009, 16:17 ET)
Mosin-nagant bolt head  (Started: Sep. 30 2009, 11:23 ET, Last post: Sep. 30 2009, 23:17 ET)
Extraction problem - 1909 argentine mauser  (Started: Sep. 30 2009, 10:02 ET, Last post: Sep. 30 2009, 21:02 ET)
Milling with my drill press?  (Started: Sep. 29 2009, 09:07 ET, Last post: Sep. 30 2009, 17:03 ET)
Is this one thing alright?
Martini henry style .22?  (Started: Sep. 27 2009, 18:43 ET, Last post: Sep. 29 2009, 23:22 ET)
Cutting the mag. opening for sten mags in m11/9  (Started: Sep. 21 2009, 12:00 ET, Last post: Sep. 28 2009, 22:31 ET)
Kt15b  (Started: Mar. 27 2009, 02:02 ET, Last post: Sep. 28 2009, 10:41 ET)
Is it back?
Surgeon action rifle stock options  (Started: Sep. 27 2009, 13:13 ET, Last post: Sep. 27 2009, 18:30 ET)
Accurizing a m1 garand  (Started: Sep. 26 2009, 11:43 ET, Last post: Sep. 27 2009, 18:17 ET)
Home repairdamascus dent  (Started: Sep. 26 2009, 11:00 ET, Last post: Sep. 27 2009, 09:34 ET)
Savage model 240 .22/410 o/u - ever hear of it?  (Started: Sep. 24 2009, 15:21 ET, Last post: Sep. 26 2009, 00:01 ET)
A new one one me
Sleeving  (Started: Sep. 23 2009, 17:26 ET, Last post: Sep. 25 2009, 10:28 ET)
Ithica 37  (Started: Sep. 22 2009, 22:51 ET, Last post: Sep. 24 2009, 23:15 ET)
Barrel change
Length of barrel on bolt movement  (Started: Sep. 22 2009, 10:18 ET, Last post: Sep. 24 2009, 21:43 ET)
Ar 50 muzzle brake help  (Started: Sep. 16 2009, 00:59 ET, Last post: Sep. 24 2009, 14:52 ET)
Muzzle brake design info
S&w 610 headspace and barrel/cylinder gap  (Started: Sep. 23 2009, 16:58 ET, Last post: Sep. 23 2009, 16:58 ET)
Dimensions for s&w 610 in 10mm
A few questons from a newbie  (Started: Sep. 20 2009, 00:35 ET, Last post: Sep. 23 2009, 01:39 ET)
Das luger automatische pistole  (Started: Sep. 17 2009, 17:18 ET, Last post: Sep. 22 2009, 22:14 ET)
A question
1917 smith & wesson  (Started: Sep. 21 2009, 19:55 ET, Last post: Sep. 22 2009, 17:52 ET)
Baikal (izh-18m-m) shotgun to 223  (Started: Sep. 20 2009, 18:15 ET, Last post: Sep. 21 2009, 18:26 ET)
Is it a good ida&how would you do it?
Long tube telescopic sight  (Started: Sep. 14 2009, 00:50 ET, Last post: Sep. 20 2009, 22:43 ET)
Any plans?
Walnut,  (Started: Sep. 18 2009, 15:12 ET, Last post: Sep. 18 2009, 22:08 ET)
Flame hardening?  (Started: Sep. 7 2009, 22:03 ET, Last post: Sep. 15 2009, 22:07 ET)
Explaination
6br reamer question  (Started: Sep. 14 2009, 17:49 ET, Last post: Sep. 15 2009, 21:37 ET)
What to do with a big propane tank with a hole.  (Started: Sep. 13 2009, 20:00 ET, Last post: Sep. 15 2009, 20:29 ET)
Single shot break action shotgun  (Started: Sep. 13 2009, 23:02 ET, Last post: Sep. 15 2009, 08:43 ET)
Need advice on a action?  (Started: Sep. 9 2009, 18:02 ET, Last post: Sep. 14 2009, 15:15 ET)
Don't laugh to hard!
Pipe burner  (Started: Sep. 13 2009, 12:25 ET, Last post: Sep. 13 2009, 22:06 ET)
Stevens favorite 1915  (Started: Sep. 13 2009, 10:24 ET, Last post: Sep. 13 2009, 20:54 ET)
Cz-527 bolt locked  (Started: Aug. 22 2009, 18:10 ET, Last post: Sep. 13 2009, 14:28 ET)
Bolt locked up
Spot annealing stainless steel after welding  (Started: Sep. 10 2009, 16:44 ET, Last post: Sep. 13 2009, 13:48 ET)
How do you do it
Bolt handle on p-14/m1917  (Started: Sep. 13 2009, 07:16 ET, Last post: Sep. 13 2009, 12:40 ET)
Roggio aresenal lower rec  (Started: Sep. 11 2009, 20:10 ET, Last post: Sep. 11 2009, 20:10 ET)
Anybody know about these?
Fcg jig from cnc  (Started: Sep. 10 2009, 19:48 ET, Last post: Sep. 11 2009, 15:54 ET)
How to install this thing
Strength of magnesium bronze vs aluminum  (Started: Sep. 10 2009, 23:38 ET, Last post: Sep. 11 2009, 12:18 ET)
B-17 parts
6.5mm sks?  (Started: Aug. 11 2009, 19:21 ET, Last post: Sep. 8 2009, 17:15 ET)
What pistol is this?  (Started: Aug. 31 2009, 17:11 ET, Last post: Sep. 7 2009, 11:57 ET)
.22 sidelever
Jewelers rouge ok to aid break in?  (Started: Aug. 17 2009, 19:48 ET, Last post: Sep. 5 2009, 02:10 ET)
Sharpening drill bits  (Started: Aug. 19 2009, 13:07 ET, Last post: Sep. 4 2009, 17:43 ET)
Do-able at home or $$$$ sharpener reqd?
Timney trigger  (Started: May 18 2009, 19:44 ET, Last post: Sep. 1 2009, 21:17 ET)
Pps 43 bolt  (Started: Sep. 1 2009, 16:56 ET, Last post: Sep. 1 2009, 16:56 ET)
Remove rear sight band  (Started: Aug. 23 2009, 08:32 ET, Last post: Aug. 31 2009, 18:49 ET)
Want to remove mauser rear sight band.
Pps43  (Started: Aug. 20 2009, 11:28 ET, Last post: Aug. 30 2009, 21:15 ET)
Pin location
Need 17 hm2 reamer dims/chamber print  (Started: Aug. 27 2009, 12:57 ET, Last post: Aug. 29 2009, 08:05 ET)
Hey nevada!!
Has anyone tried a bufferless ar in pistol caliber  (Started: Aug. 19 2009, 15:46 ET, Last post: Aug. 25 2009, 11:58 ET)
Bufferless ar
Re-stock pre '64 model 70  (Started: Aug. 20 2009, 13:12 ET, Last post: Aug. 23 2009, 09:35 ET)
Pre '64 model 70 trigger  (Started: Aug. 22 2009, 16:18 ET, Last post: Aug. 22 2009, 16:39 ET)
Interarms jw15  (Started: Aug. 17 2009, 19:40 ET, Last post: Aug. 18 2009, 10:51 ET)
Bolt disassembly
Shotgun bead sight.  (Started: Aug. 16 2009, 11:27 ET, Last post: Aug. 17 2009, 16:51 ET)
How simple to add one?
Strange barrel  (Started: Aug. 13 2009, 12:32 ET, Last post: Aug. 17 2009, 13:14 ET)
.38 special wc pistol possible?  (Started: Aug. 10 2009, 01:14 ET, Last post: Aug. 15 2009, 15:56 ET)
Mauser headspacing  (Started: Aug. 12 2009, 02:20 ET, Last post: Aug. 15 2009, 01:27 ET)
Drilling and tapping win/browning 86 receivers  (Started: Jul. 29 2009, 05:23 ET, Last post: Aug. 14 2009, 11:13 ET)
Cz-82  (Started: Aug. 11 2009, 09:18 ET, Last post: Aug. 11 2009, 09:18 ET)
Extended and threaded barrell
Gotter'done  (Started: Aug. 9 2009, 10:50 ET, Last post: Aug. 11 2009, 07:12 ET)
Ruger 10/22 firing pin spring  (Started: Aug. 3 2009, 17:19 ET, Last post: Aug. 10 2009, 16:35 ET)
Cleaning firing pin spring on ruger  (Started: Aug. 4 2009, 11:02 ET, Last post: Aug. 10 2009, 16:31 ET)
What is this?  (Started: Aug. 9 2009, 11:23 ET, Last post: Aug. 10 2009, 16:07 ET)
Boresnakes  (Started: Jun. 15 2009, 22:57 ET, Last post: Aug. 10 2009, 15:17 ET)
Etching bolt metal for teflon paint  (Started: Aug. 6 2009, 21:54 ET, Last post: Aug. 8 2009, 21:27 ET)
Sarco "grade ii" 1911 frames....  (Started: Jul. 10 2009, 19:29 ET, Last post: Aug. 7 2009, 22:56 ET)
Pellet seater  (Started: Aug. 4 2009, 22:42 ET, Last post: Aug. 6 2009, 14:50 ET)
Where to get/find
Cutting thick metal with a scrollsaw  (Started: Aug. 5 2009, 02:29 ET, Last post: Aug. 6 2009, 03:01 ET)
Anyone here done it?
Lathe spindle bore size for target barrels  (Started: Aug. 4 2009, 08:33 ET, Last post: Aug. 4 2009, 17:04 ET)
Sig p229 slide question  (Started: Aug. 3 2009, 13:03 ET, Last post: Aug. 4 2009, 16:16 ET)
Chamber reamer question  (Started: Aug. 2 2009, 19:16 ET, Last post: Aug. 4 2009, 13:22 ET)
What size over cartridge diagram
Mauser feeding problem  (Started: Aug. 3 2009, 01:54 ET, Last post: Aug. 3 2009, 23:29 ET)
Another mauser question  (Started: Jul. 27 2009, 17:23 ET, Last post: Aug. 1 2009, 13:49 ET)
Chasing reciever threads
Marlin 60/ glenfield owners, i need your help  (Started: Jul. 28 2009, 19:47 ET, Last post: Jul. 31 2009, 19:41 ET)
Need measurements for list
Jezail  (Started: Jul. 31 2009, 03:40 ET, Last post: Jul. 31 2009, 11:09 ET)
Anyone know anything about this?
41 colt  (Started: Jul. 29 2009, 23:00 ET, Last post: Jul. 30 2009, 17:54 ET)
Trigger on tarus pt709 adjustable??  (Started: Jul. 29 2009, 01:10 ET, Last post: Jul. 29 2009, 01:10 ET)
Can it be done?
Source of charcol for bp? active filter charcoal?  (Started: Jul. 28 2009, 12:44 ET, Last post: Jul. 28 2009, 22:59 ET)
Barrel wall thickness  (Started: Jul. 19 2009, 21:27 ET, Last post: Jul. 28 2009, 16:31 ET)
Too thin for a 9mm??
Rust blue question  (Started: Jul. 27 2009, 16:17 ET, Last post: Jul. 28 2009, 14:02 ET)
Undrilled formed ak receiver blank  (Started: Jul. 26 2009, 16:15 ET, Last post: Jul. 27 2009, 15:56 ET)
Undrilled formed ak receiver blank
Mossberg 12ga build help  (Started: Jul. 19 2009, 16:22 ET, Last post: Jul. 26 2009, 23:42 ET)
Lapping mauser locking lugs  (Started: Jul. 23 2009, 23:07 ET, Last post: Jul. 25 2009, 21:39 ET)
3rd lug
My new "i gotta build this"  (Started: Jul. 21 2009, 02:57 ET, Last post: Jul. 24 2009, 19:28 ET)
Cobray terminator
Fitting claw mounts  (Started: Jul. 23 2009, 05:31 ET, Last post: Jul. 23 2009, 22:40 ET)
Suhler claw mounts on an old drilling
Hi power  (Started: Jul. 19 2009, 07:01 ET, Last post: Jul. 22 2009, 12:50 ET)
Mag interchangeability
Anybody have experience with titanium?  (Started: Apr. 25 2009, 22:29 ET, Last post: Jul. 21 2009, 23:51 ET)
Looking for people with titanium experie
762x39 in kimber 84m  (Started: Jul. 21 2009, 07:31 ET, Last post: Jul. 21 2009, 07:31 ET)
Trigger mechanisms  (Started: Jul. 19 2009, 10:24 ET, Last post: Jul. 20 2009, 21:39 ET)
Help educate me about trigger mechs!
7.62 tokarev  (Started: Jul. 13 2009, 11:46 ET, Last post: Jul. 20 2009, 11:24 ET)
Brass full length tubes  (Started: Jul. 18 2009, 00:17 ET, Last post: Jul. 19 2009, 22:30 ET)
For shotgun
Beretta clip  (Started: Jul. 16 2009, 22:15 ET, Last post: Jul. 19 2009, 22:02 ET)
Chamber reamer diagram for 9mm luger  (Started: Jul. 19 2009, 09:24 ET, Last post: Jul. 19 2009, 19:37 ET)
Armstrong receiver sight  (Started: Jul. 16 2009, 00:51 ET, Last post: Jul. 16 2009, 00:51 ET)
Pps43- tapco g2 double hook  (Started: Jul. 13 2009, 20:00 ET, Last post: Jul. 15 2009, 21:25 ET)
Springs
Bolt weight  (Started: Jul. 13 2009, 22:42 ET, Last post: Jul. 14 2009, 03:44 ET)
Best "non cutting oil" to use on chamber reamers  (Started: Jun. 8 2009, 23:20 ET, Last post: Jul. 12 2009, 20:57 ET)
Motor oil? gear lube? mix of something?
Greener 12 ga?????  (Started: Jun. 11 2009, 22:18 ET, Last post: Jul. 12 2009, 20:52 ET)
Chamber reamers  (Started: Jul. 12 2009, 10:37 ET, Last post: Jul. 12 2009, 13:54 ET)
Where to find
Soumi drum, sten marriage  (Started: Jul. 10 2009, 23:24 ET, Last post: Jul. 12 2009, 08:58 ET)
Anyone attempted?
Bluing aluminum  (Started: Jul. 1 2009, 23:41 ET, Last post: Jul. 11 2009, 00:57 ET)
Little help  (Started: Jul. 9 2009, 15:04 ET, Last post: Jul. 9 2009, 15:04 ET)
Looking for dimensions
Grip safety and or trigger saftey?  (Started: Jul. 2 2009, 19:36 ET, Last post: Jul. 9 2009, 15:04 ET)
Good or bad idea?
Chambering .22lr  (Started: Jul. 7 2009, 21:16 ET, Last post: Jul. 8 2009, 11:03 ET)
Barrel for pps43  (Started: Jul. 2 2009, 13:07 ET, Last post: Jul. 6 2009, 14:40 ET)
Where to find a barrel
M77 la to varmit conversion  (Started: Jul. 5 2009, 13:43 ET, Last post: Jul. 5 2009, 20:44 ET)
What varmit calibers can i use
Mini-14 front sight  (Started: Jun. 24 2009, 08:24 ET, Last post: Jul. 5 2009, 17:47 ET)
Removing the front sight
Ar 10/ar 15 fire control group  (Started: Jul. 4 2009, 14:29 ET, Last post: Jul. 4 2009, 16:12 ET)
Ar 10/ar 15 fire control group
I need a machining lesson from you real machinists  (Started: Jun. 24 2009, 19:55 ET, Last post: Jul. 3 2009, 16:14 ET)
Springfield xd fitted barrel  (Started: Jul. 1 2009, 12:50 ET, Last post: Jul. 2 2009, 14:35 ET)
1940-early 50's pistol lock  (Started: Jun. 30 2009, 20:57 ET, Last post: Jul. 2 2009, 00:25 ET)
Unusual sear
Hi-cap .45 mag dimensions  (Started: Jun. 19 2009, 15:50 ET, Last post: Jul. 1 2009, 11:09 ET)
What will fit in a witness?
Roller delayed blowback... 50 cal?  (Started: Jun. 26 2009, 16:04 ET, Last post: Jun. 30 2009, 14:34 ET)
Would it even be possible?
Gunsmithing metal question  (Started: Jun. 27 2009, 17:52 ET, Last post: Jun. 30 2009, 00:42 ET)
300 whisper/chickopee?  (Started: Jun. 20 2009, 08:23 ET, Last post: Jun. 28 2009, 08:52 ET)
New project; .260 rem m1  (Started: Jun. 26 2009, 21:00 ET, Last post: Jun. 26 2009, 21:00 ET)
Machining a new barrel
My tt33 is ugly, need help!!!  (Started: Jun. 12 2009, 04:35 ET, Last post: Jun. 22 2009, 16:55 ET)
Where to find barrel blank?  (Started: Jun. 18 2009, 04:53 ET, Last post: Jun. 20 2009, 11:48 ET)
Self regulating gas pistons  (Started: May 31 2009, 13:24 ET, Last post: Jun. 19 2009, 16:31 ET)
How do they work?
Looking for a mauser/browning guru  (Started: Jun. 17 2009, 22:09 ET, Last post: Jun. 18 2009, 07:27 ET)
Browning l69 bolt
Need parts list and drawing  (Started: Jun. 14 2009, 21:31 ET, Last post: Jun. 16 2009, 19:06 ET)
Cutting a barrel  (Started: May 22 2009, 08:52 ET, Last post: Jun. 16 2009, 19:04 ET)
Case neck turning  (Started: Jun. 13 2009, 14:43 ET, Last post: Jun. 14 2009, 20:09 ET)
What do you guys use?
Ar dis connector problem  (Started: Jun. 11 2009, 20:22 ET, Last post: Jun. 12 2009, 01:08 ET)
Calling all ar gurus
Ar 15 trigger pin to hammer pin measurements  (Started: Jun. 11 2009, 02:39 ET, Last post: Jun. 11 2009, 21:08 ET)
Drilling a barrel pin hole?  (Started: Jun. 7 2009, 18:29 ET, Last post: Jun. 11 2009, 06:00 ET)
Fluting a barrel  (Started: Jun. 8 2009, 14:22 ET, Last post: Jun. 10 2009, 17:50 ET)
Remmington actions  (Started: Jun. 9 2009, 18:43 ET, Last post: Jun. 10 2009, 15:57 ET)
10/22 bolt mass reduction  (Started: Feb. 15 2009, 16:10 ET, Last post: Jun. 9 2009, 17:13 ET)
Shooting cb's in a 10/22
Silver braze a barrel trunnion?  (Started: Jun. 2 2009, 18:26 ET, Last post: Jun. 6 2009, 22:26 ET)
1911 barrel seat cut  (Started: Jun. 2 2009, 02:41 ET, Last post: Jun. 3 2009, 21:49 ET)
I need it explained
Mas 49/56 converted to 6.5x55  (Started: May 29 2009, 09:36 ET, Last post: Jun. 1 2009, 23:04 ET)
Handi-rifle 7.62 x 39  (Started: May 31 2009, 02:09 ET, Last post: Jun. 1 2009, 00:09 ET)
Bore dia
Keyway broach for cutting bolt action receiver lug  (Started: May 8 2009, 22:26 ET, Last post: May 31 2009, 20:53 ET)
Maybe?
Rail for target rifles.  (Started: May 17 2009, 19:45 ET, Last post: May 30 2009, 06:59 ET)
Powder from .22 fasteners  (Started: May 19 2009, 15:13 ET, Last post: May 30 2009, 06:12 ET)
Lyman sight  (Started: May 29 2009, 04:10 ET, Last post: May 29 2009, 04:10 ET)
Take down
Numrich ?  (Started: May 23 2009, 09:57 ET, Last post: May 24 2009, 11:41 ET)
.222 bull barrel/ what can i make?  (Started: May 21 2009, 22:54 ET, Last post: May 24 2009, 11:28 ET)
Chamber choices for a .222 1/14 barrell
John taylor,  (Started: May 22 2009, 16:02 ET, Last post: May 22 2009, 16:02 ET)
A red dot sight question  (Started: May 19 2009, 17:50 ET, Last post: May 22 2009, 13:31 ET)
My first build  (Started: May 16 2009, 21:25 ET, Last post: May 22 2009, 13:22 ET)
22mag semi auto mach. pistol
Manual curved tool path milling  (Started: May 20 2009, 11:42 ET, Last post: May 21 2009, 15:48 ET)
Curved path milling how to
Scope mount question?  (Started: May 20 2009, 22:32 ET, Last post: May 20 2009, 22:32 ET)
Tasco accudot
Firing pin question  (Started: May 20 2009, 22:18 ET, Last post: May 20 2009, 22:18 ET)
Modifying an ar15 firing pin for my 50
Mkii drill & tap  (Started: May 12 2009, 02:08 ET, Last post: May 18 2009, 22:39 ET)
Sti 1911 frame  (Started: Mar. 21 2009, 04:44 ET, Last post: May 17 2009, 22:11 ET)
Sti 1911 frame
Gun steel sources  (Started: May 15 2009, 22:12 ET, Last post: May 16 2009, 11:53 ET)
Source for hex tubing?  (Started: Apr. 25 2009, 21:10 ET, Last post: May 15 2009, 20:03 ET)
For a .50 cal?
Stevens favorite woes  (Started: Apr. 22 2009, 20:54 ET, Last post: May 13 2009, 00:04 ET)
Looking for 17 hmr reamer dimensions  (Started: May 12 2009, 08:18 ET, Last post: May 12 2009, 22:22 ET)
Mauser thread sizes  (Started: May 6 2009, 02:23 ET, Last post: May 12 2009, 17:18 ET)
What do i have
Burp gun  (Started: May 1 2009, 23:03 ET, Last post: May 12 2009, 16:57 ET)
Rem 513t  (Started: Apr. 20 2009, 10:06 ET, Last post: May 12 2009, 00:37 ET)
S&w top break  (Started: May 8 2009, 20:28 ET, Last post: May 10 2009, 11:22 ET)
Firearm functioing
Sleaving a barrel,  (Started: Apr. 29 2009, 08:12 ET, Last post: May 7 2009, 07:30 ET)
Uberti walker colt issue  (Started: May 5 2009, 21:12 ET, Last post: May 5 2009, 22:52 ET)
1911 barrel fitting question  (Started: May 5 2009, 20:26 ET, Last post: May 5 2009, 20:26 ET)
Firing pins for a.h fox sxs?  (Started: May 5 2009, 13:34 ET, Last post: May 5 2009, 14:16 ET)
Where to find?
Name that tool  (Started: May 3 2009, 00:00 ET, Last post: May 3 2009, 21:28 ET)
What tool steel do i have and need?  (Started: Apr. 22 2009, 00:58 ET, Last post: May 1 2009, 22:58 ET)
How hard would it be?  (Started: Apr. 26 2009, 12:36 ET, Last post: Apr. 30 2009, 21:41 ET)
38 spcl. conversion possible ?  (Started: Apr. 30 2009, 04:42 ET, Last post: Apr. 30 2009, 04:42 ET)
Converting 38 spcl. to 327 mag.
1911 mag release cover?  (Started: Apr. 22 2009, 21:03 ET, Last post: Apr. 30 2009, 02:36 ET)
Barrel shank threads  (Started: Apr. 27 2009, 11:36 ET, Last post: Apr. 28 2009, 08:32 ET)
Problem with a colt  (Started: Apr. 27 2009, 14:42 ET, Last post: Apr. 28 2009, 07:18 ET)
Thread chase
Anybody know the patent number?  (Started: Apr. 26 2009, 12:18 ET, Last post: Apr. 27 2009, 00:59 ET)
.410 rifled barrel  (Started: Apr. 21 2009, 21:33 ET, Last post: Apr. 26 2009, 22:00 ET)
Any sources
Sick winchester 94  (Started: Apr. 23 2009, 08:43 ET, Last post: Apr. 25 2009, 23:29 ET)
Loose barrel on m94ae
.22 chamber reamer differences - why?  (Started: Apr. 25 2009, 10:07 ET, Last post: Apr. 25 2009, 11:43 ET)
What is different about the rem 870 express  (Started: Apr. 21 2009, 08:37 ET, Last post: Apr. 25 2009, 11:26 ET)
Mag extension for 870 won't work for exp
How to test magazines?  (Started: Apr. 24 2009, 23:52 ET, Last post: Apr. 25 2009, 00:08 ET)
Abene vhf-2b horizontal/vertical mill  (Started: Apr. 9 2009, 13:37 ET, Last post: Apr. 24 2009, 12:15 ET)
Need help are these a good mill?
S. korean magazines  (Started: Apr. 22 2009, 18:57 ET, Last post: Apr. 22 2009, 18:57 ET)
Are they reliable?
Sten mag modification  (Started: Apr. 18 2009, 02:52 ET, Last post: Apr. 21 2009, 15:29 ET)
Looking for dimensions to modify sten...
Scope mounting kits  (Started: Apr. 18 2009, 20:50 ET, Last post: Apr. 20 2009, 23:42 ET)
Bolt jeweling  (Started: Apr. 1 2009, 00:28 ET, Last post: Apr. 20 2009, 03:04 ET)
What brush to use
Forcing cone  (Started: Apr. 13 2009, 11:53 ET, Last post: Apr. 20 2009, 03:02 ET)
Dimensions ?
Anyone designed a scope mount like this  (Started: Apr. 16 2009, 15:50 ET, Last post: Apr. 16 2009, 23:30 ET)
Scopee mount design
Bull barrel sleeve  (Started: Apr. 12 2009, 11:28 ET, Last post: Apr. 15 2009, 22:08 ET)
Has it been done?
Colt 1903 .32acp  (Started: Apr. 13 2009, 13:29 ET, Last post: Apr. 13 2009, 14:14 ET)
Looking for parts
Do we know why?  (Started: Apr. 8 2009, 12:20 ET, Last post: Apr. 13 2009, 13:42 ET)
Aluminum hk91/sar8 upper  (Started: Apr. 13 2009, 00:49 ET, Last post: Apr. 13 2009, 10:06 ET)
Winchester 97 shotgun help?  (Started: Mar. 20 2009, 07:16 ET, Last post: Apr. 13 2009, 09:44 ET)
Anyone own one?
Who here does lathe work for hire?  (Started: Apr. 1 2009, 04:58 ET, Last post: Apr. 12 2009, 12:09 ET)
Punch ?  (Started: Apr. 7 2009, 17:36 ET, Last post: Apr. 8 2009, 18:55 ET)
.45 chamber wall thickness  (Started: Mar. 30 2009, 14:48 ET, Last post: Apr. 7 2009, 20:39 ET)
Converting marlin to straight stock  (Started: Apr. 3 2009, 11:18 ET, Last post: Apr. 3 2009, 17:44 ET)
Sear engagement  (Started: Feb. 15 2009, 21:55 ET, Last post: Apr. 3 2009, 03:13 ET)
Striker fired .22  (Started: Mar. 16 2009, 01:39 ET, Last post: Apr. 2 2009, 20:52 ET)
Is this doable this way?
Steyr mod. 30-06 spr. barrel dimension & breech  (Started: Apr. 1 2009, 10:33 ET, Last post: Apr. 1 2009, 10:33 ET)
Tang sights  (Started: Mar. 20 2009, 19:24 ET, Last post: Apr. 1 2009, 08:23 ET)
Verniers
37mm specs  (Started: Mar. 31 2009, 12:44 ET, Last post: Mar. 31 2009, 22:12 ET)
What in the heck are they
4140 pgt question  (Started: Mar. 21 2009, 14:18 ET, Last post: Mar. 30 2009, 17:40 ET)
Can this be machined and heat treated?
Old style vs new style ak extractors.  (Started: Mar. 26 2009, 11:18 ET, Last post: Mar. 30 2009, 15:11 ET)
Why are some enclosed, and others open?
Rossi .410 shotgun barrel conversion ?  (Started: Mar. 30 2009, 08:12 ET, Last post: Mar. 30 2009, 11:12 ET)
Putting in a liner
98 mauser  (Started: Mar. 14 2009, 23:25 ET, Last post: Mar. 30 2009, 01:25 ET)
Striker not falling
Gunsmith schools  (Started: Feb. 17 2009, 04:08 ET, Last post: Mar. 29 2009, 14:48 ET)
Learning gunsmithing
Reforming hammer spring  (Started: Mar. 29 2009, 02:03 ET, Last post: Mar. 29 2009, 08:03 ET)
Spring for fmj derringer
Linseed oil on phosphated finishes!?  (Started: Mar. 28 2009, 09:43 ET, Last post: Mar. 28 2009, 19:45 ET)
According to roy e. dunlap.
Drilling buttstocks  (Started: Mar. 27 2009, 03:20 ET, Last post: Mar. 28 2009, 09:03 ET)
Drill shape
Fal barrel-bipod cut  (Started: Mar. 24 2009, 06:51 ET, Last post: Mar. 27 2009, 15:14 ET)
Need some drawings
Countersink/screw head size  (Started: Mar. 26 2009, 00:27 ET, Last post: Mar. 27 2009, 12:04 ET)
How da do dat?  (Started: Mar. 26 2009, 08:52 ET, Last post: Mar. 26 2009, 23:52 ET)
Holmes pistol  (Started: Mar. 23 2009, 17:17 ET, Last post: Mar. 26 2009, 16:11 ET)
Glock porting  (Started: Mar. 25 2009, 19:46 ET, Last post: Mar. 25 2009, 19:46 ET)
Straightening a rifle blr.  (Started: Mar. 23 2009, 00:50 ET, Last post: Mar. 23 2009, 18:50 ET)
Straightening a rifle blr.  (Started: Mar. 23 2009, 00:49 ET, Last post: Mar. 23 2009, 17:02 ET)
Sks ak mag conversion legality question  (Started: Mar. 22 2009, 09:49 ET, Last post: Mar. 23 2009, 14:35 ET)
Torque  (Started: Mar. 21 2009, 21:33 ET, Last post: Mar. 22 2009, 23:29 ET)
Rule of thumb
Enco mill drill t slots  (Started: Feb. 25 2009, 01:01 ET, Last post: Mar. 20 2009, 19:08 ET)
Darn that broken english
Slitting saw  (Started: Mar. 14 2009, 10:42 ET, Last post: Mar. 20 2009, 18:53 ET)
What to do with them.
Souldering  (Started: Mar. 18 2009, 12:04 ET, Last post: Mar. 19 2009, 17:50 ET)
Breaking 1/16" drill bits in deep holes  (Started: Mar. 17 2009, 20:36 ET, Last post: Mar. 18 2009, 15:09 ET)
Any suggestions
Bedding a synthetic stock?  (Started: Mar. 17 2009, 19:46 ET, Last post: Mar. 18 2009, 08:18 ET)
Headspace question  (Started: Mar. 16 2009, 02:29 ET, Last post: Mar. 16 2009, 15:04 ET)
Just wondering
Reamer dimensions  (Started: Mar. 15 2009, 02:27 ET, Last post: Mar. 15 2009, 20:35 ET)
.500 linebaugh
D1-8 locking pins information  (Started: Mar. 12 2009, 20:13 ET, Last post: Mar. 14 2009, 21:32 ET)
Old barrels  (Started: Mar. 14 2009, 20:58 ET, Last post: Mar. 14 2009, 20:58 ET)
Threading a barrel for a remington 700  (Started: Mar. 9 2009, 00:55 ET, Last post: Mar. 14 2009, 13:11 ET)
Primer dimensions  (Started: Mar. 13 2009, 22:24 ET, Last post: Mar. 14 2009, 12:51 ET)
Primer dimensions
Break action shotguns  (Started: Mar. 10 2009, 23:26 ET, Last post: Mar. 14 2009, 12:16 ET)
Barrel assembly construction
Drill size for m9x.75 tap  (Started: Mar. 14 2009, 00:15 ET, Last post: Mar. 14 2009, 02:37 ET)
50 bmg receiver  (Started: Feb. 26 2009, 02:05 ET, Last post: Mar. 14 2009, 00:00 ET)
Will 1045 work as a receiver/bolt
Sterling arms 400 mk ii  (Started: Mar. 10 2009, 06:49 ET, Last post: Mar. 12 2009, 00:15 ET)
M14/m1a barrel drawings ?  (Started: Mar. 11 2009, 17:28 ET, Last post: Mar. 11 2009, 17:28 ET)
Backlash table adjustment  (Started: Mar. 1 2009, 19:55 ET, Last post: Mar. 8 2009, 16:44 ET)
Moisin nagant  (Started: Mar. 7 2009, 10:50 ET, Last post: Mar. 8 2009, 12:23 ET)
Action strength
Romanian ak bending fixture  (Started: Mar. 6 2009, 10:22 ET, Last post: Mar. 6 2009, 18:34 ET)
Romanian ak bending fixture
Youth safety gear for shooting  (Started: Feb. 20 2009, 17:16 ET, Last post: Mar. 6 2009, 12:37 ET)
Eye/ear
How does feeding work on belt-fed guns?  (Started: Dec. 19 2006, 16:34 ET, Last post: Mar. 4 2009, 18:50 ET)
Colt mustang question that %$@* trigger  (Started: Feb. 23 2009, 12:24 ET, Last post: Mar. 3 2009, 21:09 ET)
Double end mills and r8 collets  (Started: Feb. 21 2009, 15:32 ET, Last post: Mar. 1 2009, 22:08 ET)
Any problems?
Help with action type for bp rifle  (Started: Feb. 27 2009, 19:08 ET, Last post: Mar. 1 2009, 14:18 ET)
Blueing  (Started: Feb. 22 2009, 19:03 ET, Last post: Feb. 24 2009, 08:24 ET)
Hot vs cold...etc
Winchester model 94 question  (Started: Feb. 22 2009, 20:29 ET, Last post: Feb. 23 2009, 10:18 ET)
Lockup and general function, drawings?
Headspace gauge dimensions  (Started: Feb. 20 2009, 11:18 ET, Last post: Feb. 21 2009, 12:52 ET)
Harbor freight rotary table  (Started: Feb. 20 2009, 17:09 ET, Last post: Feb. 21 2009, 12:36 ET)
Any experience?
Which type of reamer  (Started: Feb. 20 2009, 04:42 ET, Last post: Feb. 21 2009, 10:50 ET)
Removable pilot, carbide , high speed
Twisted nicely, but how's the girth?  (Started: Feb. 20 2009, 20:47 ET, Last post: Feb. 21 2009, 07:21 ET)
Yet another puzzle...
Welding mauser bolt  (Started: Jan. 20 2009, 21:23 ET, Last post: Feb. 20 2009, 20:40 ET)
I have some welding questions
Dc motors  (Started: Feb. 18 2009, 08:06 ET, Last post: Feb. 20 2009, 20:28 ET)
Need help
Twist and shout  (Started: Feb. 19 2009, 18:42 ET, Last post: Feb. 20 2009, 17:07 ET)
How much per caliber?
Could a 10mm chamber barrel be cut to a .40 corbon  (Started: Feb. 20 2009, 16:48 ET, Last post: Feb. 20 2009, 16:48 ET)
17 hmr bolt mass ???  (Started: Feb. 18 2009, 19:21 ET, Last post: Feb. 20 2009, 10:48 ET)
Maadi-griffin gas venting  (Started: Feb. 16 2009, 00:42 ET, Last post: Feb. 19 2009, 01:13 ET)
Mossberg 500  (Started: Jan. 25 2009, 22:47 ET, Last post: Feb. 18 2009, 22:31 ET)
Barrel construction
Impossible to overload a muzzleloader  (Started: Feb. 17 2009, 16:35 ET, Last post: Feb. 18 2009, 18:03 ET)
Old wives tale?
A fast colt mustang question  (Started: Feb. 17 2009, 21:48 ET, Last post: Feb. 18 2009, 11:03 ET)
How do you clean a dirty motorcycle engine header  (Started: Feb. 16 2009, 19:07 ET, Last post: Feb. 17 2009, 20:43 ET)
Home made collimator (or reflex) sight?  (Started: Feb. 16 2009, 15:36 ET, Last post: Feb. 16 2009, 21:44 ET)
Possible?
380 auto, 32 acp or 9mm 10/22  (Started: Jan. 20 2009, 17:19 ET, Last post: Feb. 16 2009, 00:01 ET)
Taping ar15 buffer tube  (Started: Feb. 11 2009, 09:19 ET, Last post: Feb. 14 2009, 23:59 ET)
Measuring from center of a hole without dros...  (Started: Feb. 13 2009, 21:21 ET, Last post: Feb. 13 2009, 22:47 ET)
Low wall winchester  (Started: Jan. 18 2009, 02:49 ET, Last post: Feb. 13 2009, 20:11 ET)
I got lucky
Complete wtf moment  (Started: Jan. 26 2009, 20:41 ET, Last post: Feb. 12 2009, 21:32 ET)
12 gauge chokes
10/22 threaded receiver and barrel  (Started: Feb. 11 2009, 18:36 ET, Last post: Feb. 12 2009, 18:21 ET)
Can someone help me find a file or drawing  (Started: Feb. 10 2009, 09:02 ET, Last post: Feb. 12 2009, 17:17 ET)
For larcin .25
Replacing s&w hammer nose  (Started: Feb. 10 2009, 06:57 ET, Last post: Feb. 11 2009, 19:11 ET)
Aluminum 7075  (Started: Jan. 18 2009, 03:24 ET, Last post: Feb. 11 2009, 11:30 ET)
Dan wesson .357  (Started: Dec. 14 2008, 12:50 ET, Last post: Feb. 11 2009, 09:29 ET)
Function problems
1911 feed ramp prob for newbie  (Started: Feb. 7 2009, 19:18 ET, Last post: Feb. 11 2009, 06:56 ET)
Milling taper octagon barrel  (Started: Feb. 7 2009, 06:35 ET, Last post: Feb. 11 2009, 00:08 ET)
Upscaling an sks?  (Started: Feb. 9 2009, 17:46 ET, Last post: Feb. 10 2009, 18:27 ET)
Can it be done
Ar15 barrel thread  (Started: Feb. 9 2009, 20:48 ET, Last post: Feb. 10 2009, 18:13 ET)
Need length of thread for ar15
Lube system?  (Started: Feb. 8 2009, 18:32 ET, Last post: Feb. 9 2009, 20:48 ET)
Where can i buy...  (Started: Feb. 7 2009, 22:33 ET, Last post: Feb. 7 2009, 23:39 ET)
Iver johnson needs some work  (Started: Feb. 3 2009, 20:21 ET, Last post: Feb. 7 2009, 11:02 ET)
.22 compensators  (Started: Jan. 12 2009, 06:57 ET, Last post: Feb. 6 2009, 00:06 ET)
Which rings and base do i need??  (Started: Feb. 3 2009, 09:01 ET, Last post: Feb. 4 2009, 11:32 ET)
Leopold vx-iii and churchhill highlander
How much diffence is barrel quality  (Started: Feb. 2 2009, 22:04 ET, Last post: Feb. 4 2009, 10:08 ET)
When buying the same barrel from differn
Jig for ar15 lower repair  (Started: Feb. 3 2009, 04:29 ET, Last post: Feb. 3 2009, 22:41 ET)
Repair cracked ar lower
Need help iding an old gun  (Started: Jan. 27 2009, 22:21 ET, Last post: Feb. 3 2009, 17:02 ET)
Flat ground stock for an ak receiver  (Started: Feb. 2 2009, 10:17 ET, Last post: Feb. 3 2009, 05:34 ET)
Flat ground stock for an ak receiver
Carbon fiber barrel wrap?  (Started: Jan. 31 2009, 11:14 ET, Last post: Feb. 2 2009, 17:45 ET)
Anybody try it yet?
0% to 40% 1911  (Started: Jan. 30 2009, 14:40 ET, Last post: Feb. 1 2009, 18:22 ET)
4140 garand action?  (Started: Feb. 1 2009, 12:47 ET, Last post: Feb. 1 2009, 18:18 ET)
Brocock air cartridge pistol  (Started: Jan. 12 2003, 15:37 ET, Last post: Feb. 1 2009, 17:46 ET)
Legality of live fire conversion
Cherry wood problem, need help!  (Started: Jan. 31 2009, 18:40 ET, Last post: Feb. 1 2009, 14:59 ET)
223 ai feeding problems  (Started: Jan. 31 2009, 10:19 ET, Last post: Feb. 1 2009, 03:04 ET)
Premature slidelock on a star bm  (Started: Jan. 22 2009, 16:06 ET, Last post: Jan. 31 2009, 10:59 ET)
Advice on bearing surface for action.  (Started: Jan. 29 2009, 14:34 ET, Last post: Jan. 31 2009, 10:42 ET)
Could you 'hang' the bolt on a 't slot'?
Ar15 fcg pivot pins  (Started: Jan. 30 2009, 13:11 ET, Last post: Jan. 30 2009, 21:11 ET)
How are they captured?
Remington 700 .308  (Started: Jan. 27 2009, 03:10 ET, Last post: Jan. 30 2009, 12:21 ET)
Mossberg 500 persuader mag extension  (Started: Jan. 29 2009, 20:39 ET, Last post: Jan. 29 2009, 22:04 ET)
Trouble with bolt action calcs  (Started: Nov. 23 2008, 11:55 ET, Last post: Jan. 28 2009, 18:03 ET)
Rem 700 bolt using fea
Ithaca 51  (Started: Jan. 27 2009, 16:04 ET, Last post: Jan. 27 2009, 21:20 ET)
Speedmaster 552  (Started: Jan. 14 2009, 20:10 ET, Last post: Jan. 26 2009, 18:18 ET)
Unique problem
Need help with extractor material  (Started: Jan. 23 2009, 19:39 ET, Last post: Jan. 26 2009, 08:45 ET)
Star crimp die  (Started: Jan. 24 2009, 08:19 ET, Last post: Jan. 26 2009, 07:00 ET)
How to make a star crimp die
1878 colt revolver  (Started: Jan. 22 2009, 17:26 ET, Last post: Jan. 24 2009, 18:12 ET)
Rem 870 mag extension  (Started: Jan. 21 2009, 20:04 ET, Last post: Jan. 24 2009, 10:36 ET)
Which one for a 20 in. barrel
Mas 49/56 brake-stuck case removal  (Started: Jan. 22 2009, 21:00 ET, Last post: Jan. 23 2009, 22:04 ET)
Steel type question  (Started: Jan. 16 2009, 22:19 ET, Last post: Jan. 23 2009, 20:50 ET)
Win model 54 prints?  (Started: Jan. 22 2009, 12:06 ET, Last post: Jan. 22 2009, 12:06 ET)
Building a rotary bolt from scratch without cnc?  (Started: Feb. 20 2008, 00:39 ET, Last post: Jan. 22 2009, 10:18 ET)
How hard?
Opinions on plunger style ejectors.  (Started: Jan. 21 2009, 08:44 ET, Last post: Jan. 21 2009, 16:53 ET)
What do experts say on double ejectors?
Can a rem 700 bbl be fit to an ar10 bbl extension?  (Started: Jan. 10 2009, 11:36 ET, Last post: Jan. 21 2009, 00:05 ET)
Just want to know...
Winchester model 97 barrel change  (Started: Jan. 20 2009, 13:31 ET, Last post: Jan. 20 2009, 22:03 ET)
Pistol lockup design question  (Started: Jan. 17 2009, 10:22 ET, Last post: Jan. 20 2009, 21:43 ET)
Recommendations on lockup design
Winchester 94  (Started: Jan. 18 2009, 09:07 ET, Last post: Jan. 20 2009, 08:48 ET)
Date of manufacture
Anyone use hts-2000 aluminum braze/weld?  (Started: Jan. 19 2009, 01:44 ET, Last post: Jan. 20 2009, 03:11 ET)
Repair takedown ear on ar15 lower
Brass casing stuck in barrel of .22 remington 552  (Started: Jan. 14 2009, 11:16 ET, Last post: Jan. 19 2009, 20:56 ET)
Polishing ?  (Started: Jan. 13 2009, 13:50 ET, Last post: Jan. 19 2009, 15:18 ET)
Ruger no1 and .378 case  (Started: Dec. 31 2008, 09:45 ET, Last post: Jan. 19 2009, 09:02 ET)
Converting 44 to 410  (Started: Jan. 11 2009, 10:15 ET, Last post: Jan. 19 2009, 08:12 ET)
Gas piston question.moving cylinder or piston?  (Started: Jan. 16 2009, 14:14 ET, Last post: Jan. 18 2009, 10:47 ET)
Pros and cons of ak vs mini-14 style
Rear sight installation  (Started: Jan. 17 2009, 18:38 ET, Last post: Jan. 18 2009, 10:25 ET)
Handgun sights
Chrome or nickel  (Started: Jan. 14 2009, 21:54 ET, Last post: Jan. 15 2009, 20:46 ET)
Military iron sights  (Started: Jan. 11 2009, 14:36 ET, Last post: Jan. 14 2009, 23:51 ET)
How should i modify them?
"lungs of a mauser"  (Started: Jan. 13 2009, 10:02 ET, Last post: Jan. 14 2009, 18:26 ET)
Oddball question
1911 bushing †mod  (Started: Jan. 11 2009, 12:56 ET, Last post: Jan. 14 2009, 01:27 ET)
Turning a 1911 od to size.
Rotary bolt inside a cam sleeve?  (Started: May 23 2008, 11:17 ET, Last post: Jan. 13 2009, 23:36 ET)
Good idea or bad?
Sxs build 50 bmg  (Started: Dec. 31 2008, 13:08 ET, Last post: Jan. 13 2009, 16:35 ET)
Machinist drawings, reciever
Take off barrels from cz 223  (Started: Jan. 13 2009, 09:22 ET, Last post: Jan. 13 2009, 14:04 ET)
Take off barrels from cz 223
Need help with ar 15 broach  (Started: Jan. 12 2009, 01:27 ET, Last post: Jan. 12 2009, 02:07 ET)
Looking for a broach  for magwell
Cia deer gun -- diy  (Started: Jan. 11 2009, 22:16 ET, Last post: Jan. 11 2009, 23:45 ET)
Fcg info needed.
Marlin 22 cal model 88  (Started: Jan. 11 2009, 09:02 ET, Last post: Jan. 11 2009, 09:02 ET)
Dissassemble problem
Blowback shotgun?  (Started: Dec. 27 2008, 10:33 ET, Last post: Jan. 10 2009, 23:02 ET)
Date a smith & wesson l frame  (Started: Jan. 9 2009, 22:38 ET, Last post: Jan. 10 2009, 02:36 ET)
Argon tank question  (Started: Jan. 1 2009, 20:29 ET, Last post: Jan. 9 2009, 11:38 ET)
A question about knife steel  (Started: Jan. 7 2009, 23:46 ET, Last post: Jan. 8 2009, 12:11 ET)
I'm thinking about a kit
Ballistic pressure transducer ?'s  (Started: Jan. 6 2009, 08:46 ET, Last post: Jan. 8 2009, 09:11 ET)
New job opportunity
Ruger single six to centerfire?  (Started: Jan. 7 2009, 11:12 ET, Last post: Jan. 8 2009, 09:01 ET)
Tramming mill for 80% ar  (Started: Jan. 3 2009, 00:32 ET, Last post: Jan. 4 2009, 21:39 ET)
Chamber reamer co-op????  (Started: Jan. 4 2009, 00:10 ET, Last post: Jan. 4 2009, 15:29 ET)
Help id'ing an old 22 sa?  (Started: Jan. 2 2009, 04:17 ET, Last post: Jan. 2 2009, 20:02 ET)
Where to find parts  (Started: Dec. 28 2008, 23:21 ET, Last post: Jan. 1 2009, 19:25 ET)
Is a blow back action safe on a semi auto shotgun?  (Started: Jul. 18 2008, 20:15 ET, Last post: Dec. 31 2008, 19:36 ET)
Tikka t3 trigger  (Started: Dec. 30 2008, 20:06 ET, Last post: Dec. 31 2008, 19:34 ET)
Detailed photo of tikka trigger
Were to find parts (or how built it!)  (Started: Dec. 29 2008, 15:58 ET, Last post: Dec. 29 2008, 15:58 ET)
1895 winchester striper clip
Tool boxes - wood or metal?  (Started: Dec. 27 2008, 23:20 ET, Last post: Dec. 28 2008, 19:08 ET)
Best for measuring instruments?
Question for die makers  (Started: Dec. 24 2008, 11:36 ET, Last post: Dec. 27 2008, 11:20 ET)
home made reloading dies??
6.5 swede  (Started: Dec. 21 2008, 05:46 ET, Last post: Dec. 26 2008, 04:35 ET)
Help me find a stock
Double rifle  (Started: Dec. 23 2008, 22:52 ET, Last post: Dec. 24 2008, 21:13 ET)
Action suggestions
Rossi pomba  (Started: Dec. 22 2008, 23:08 ET, Last post: Dec. 23 2008, 03:15 ET)
Reassembly.........
welding slide  (Started: Sep. 21 2001, 05:44 ET, Last post: Dec. 22 2008, 21:49 ET)
Where to get blackpowder pistol kits?  (Started: Dec. 15 2008, 01:32 ET, Last post: Dec. 22 2008, 11:13 ET)
Update on my burnt guns project  (Started: Jan. 11 2007, 01:52 ET, Last post: Dec. 20 2008, 22:31 ET)
Gun broker 50 bmg barrels  (Started: Dec. 13 2008, 12:38 ET, Last post: Dec. 17 2008, 08:33 ET)
Anyone have an email address
Pump-action shotguns  (Started: Dec. 9 2008, 16:48 ET, Last post: Dec. 16 2008, 19:26 ET)
How exactly do they work?
Prexis blueprints?  (Started: Dec. 11 2008, 21:11 ET, Last post: Dec. 11 2008, 21:11 ET)
Cartridge conversion  (Started: Dec. 9 2008, 21:12 ET, Last post: Dec. 11 2008, 20:58 ET)
How to change a striker spring in browning a-bolt?  (Started: Dec. 5 2008, 21:29 ET, Last post: Dec. 11 2008, 19:48 ET)
Browning a-bolt misfires
Rebarreling old double shotguns  (Started: Dec. 7 2008, 18:22 ET, Last post: Dec. 8 2008, 14:22 ET)
Where to get parts?
Making springs  (Started: Nov. 17 2005, 20:39 ET, Last post: Dec. 7 2008, 11:04 ET)
Has anyone?
1894 marlin 38w  (Started: Dec. 6 2008, 16:38 ET, Last post: Dec. 6 2008, 16:38 ET)
Any interest in a 114 year old marlin
Is there a simple test to tell what steel  (Started: Dec. 5 2008, 14:00 ET, Last post: Dec. 5 2008, 17:03 ET)
New falling block kit
Cronograph question  (Started: Nov. 30 2008, 12:28 ET, Last post: Dec. 4 2008, 22:21 ET)
What kind do you guys use?
Win 94 hurricane project  (Started: Nov. 28 2008, 19:34 ET, Last post: Dec. 2 2008, 21:42 ET)
Makarov parts  (Started: Nov. 28 2008, 00:56 ET, Last post: Dec. 1 2008, 14:18 ET)
Gun metal big 50  (Started: Nov. 18 2008, 09:40 ET, Last post: Nov. 30 2008, 20:46 ET)
Info needed
Min .22lr chamber thickness  (Started: Nov. 23 2008, 11:25 ET, Last post: Nov. 30 2008, 08:34 ET)
Beginers questions  (Started: Nov. 29 2008, 09:10 ET, Last post: Nov. 29 2008, 10:56 ET)
Removeable barrel, how to handle the locking?  (Started: Nov. 22 2008, 09:35 ET, Last post: Nov. 28 2008, 15:28 ET)
Barrel extension, or trunnion mounted?
Second mess up, need advice  (Started: Nov. 26 2008, 20:10 ET, Last post: Nov. 28 2008, 09:20 ET)
Screw size is 8/40
How deep is the rifling in a ruger gp100?  (Started: Nov. 21 2008, 20:51 ET, Last post: Nov. 26 2008, 15:10 ET)
Is it suposed to be extremely shallow?
I have a 1867 swede #1 rolling block  (Started: Nov. 25 2008, 20:33 ET, Last post: Nov. 26 2008, 10:20 ET)
And i need a little advice. please
Need help with 50bmg action design  (Started: Nov. 23 2008, 17:08 ET, Last post: Nov. 25 2008, 14:27 ET)
Ruger #1  (Started: Nov. 23 2008, 11:01 ET, Last post: Nov. 23 2008, 13:42 ET)
Ejector
Stevens 77a repair  (Started: Nov. 22 2008, 19:44 ET, Last post: Nov. 22 2008, 19:44 ET)
Picture of inside of tyler t-grip  (Started: Nov. 21 2008, 23:10 ET, Last post: Nov. 21 2008, 23:10 ET)
Drill alignment to enlarge buffer tube hole in 80%  (Started: Nov. 20 2008, 16:03 ET, Last post: Nov. 21 2008, 12:19 ET)
How is it done on a mill...?
Action drawings  (Started: Nov. 19 2008, 19:50 ET, Last post: Nov. 20 2008, 22:45 ET)
Will it work?
Casting lower stress handgun receivers?  (Started: Nov. 5 2008, 14:10 ET, Last post: Nov. 20 2008, 16:15 ET)
Advice?
Bolt weight and spring tension for .22cal carbines  (Started: Nov. 14 2008, 23:35 ET, Last post: Nov. 20 2008, 10:20 ET)
Recomended bolt weight for .22 short....
38-55 barrel  (Started: Nov. 16 2008, 17:09 ET, Last post: Nov. 20 2008, 10:00 ET)
.22 firing pin protrusion  (Started: Oct. 2 2008, 18:41 ET, Last post: Nov. 20 2008, 09:59 ET)
10/22 in particular
Ppk threaded barrels  (Started: Nov. 16 2008, 08:31 ET, Last post: Nov. 19 2008, 23:16 ET)
How do you know  (Started: Nov. 18 2008, 19:52 ET, Last post: Nov. 19 2008, 13:00 ET)
Fixing a crack in bretta 9000s frame  (Started: Nov. 17 2008, 16:41 ET, Last post: Nov. 18 2008, 23:07 ET)
Shotgun bbl wall thickness necessary for choke thr  (Started: Nov. 17 2008, 17:45 ET, Last post: Nov. 18 2008, 14:13 ET)
Rebarrel savage 10, now it's not accurate??  (Started: Sep. 29 2008, 11:34 ET, Last post: Nov. 18 2008, 14:07 ET)
Receiver barrel contact question
Question for eaa witness owners/experts  (Started: Nov. 5 2008, 19:41 ET, Last post: Nov. 18 2008, 02:25 ET)
.45 full size and compact
Remington 514  (Started: Nov. 17 2008, 17:19 ET, Last post: Nov. 17 2008, 22:13 ET)
Anyone have one?
Aristocrat sight installation on s&w  (Started: Nov. 17 2008, 07:56 ET, Last post: Nov. 17 2008, 11:13 ET)
Remington 141  (Started: Nov. 16 2008, 20:28 ET, Last post: Nov. 17 2008, 02:36 ET)
Rear sight
Philadelphia ordnance 80% 1921 receivers  (Started: Nov. 15 2008, 14:02 ET, Last post: Nov. 15 2008, 16:30 ET)
Any info?
8opinions on striker vs hammer fired semi auto?  (Started: Nov. 13 2008, 09:08 ET, Last post: Nov. 14 2008, 23:23 ET)
Is striker fired better?
Is anyone familiar with national magazines?  (Started: Nov. 11 2008, 21:24 ET, Last post: Nov. 12 2008, 07:32 ET)
Are they reliable?
Cogswell & harrison shotgun info?  (Started: Nov. 11 2008, 12:00 ET, Last post: Nov. 11 2008, 12:00 ET)
Thread pitch for tang screw?
What materials for a 'survival' carbine?  (Started: Nov. 8 2008, 11:33 ET, Last post: Nov. 10 2008, 19:34 ET)
I want to ream my 12 ga chamber to 3 1/2"  (Started: Nov. 7 2008, 18:04 ET, Last post: Nov. 10 2008, 00:58 ET)
Which reamer do i need?
How tough are pistol barrels?  (Started: Nov. 1 2008, 23:01 ET, Last post: Nov. 7 2008, 14:26 ET)
Rebuilding semi-auto pistols.  (Started: Oct. 23 2008, 22:47 ET, Last post: Nov. 7 2008, 14:09 ET)
Where to buy broken, damaged guns?
Remington model 12  (Started: Nov. 5 2008, 09:24 ET, Last post: Nov. 7 2008, 12:42 ET)
Surefire m900a  (Started: Nov. 1 2008, 20:51 ET, Last post: Nov. 6 2008, 23:55 ET)
Straight pull steyr 95 to 410 shotgun  (Started: Sep. 29 2008, 12:14 ET, Last post: Nov. 6 2008, 11:50 ET)
Straight pull steyr 95 to 410 shotgun
Gew 98 question  (Started: Nov. 5 2008, 11:20 ET, Last post: Nov. 5 2008, 20:10 ET)
Plugged barrel and front of bolt ruined
Where to get the blue plastic replica pistols?  (Started: Nov. 5 2008, 04:06 ET, Last post: Nov. 5 2008, 09:58 ET)
Need help understand ana air rifle  (Started: Nov. 1 2008, 11:47 ET, Last post: Nov. 2 2008, 16:17 ET)
Removing a ruger 22/45 barrel  (Started: Oct. 15 2008, 19:34 ET, Last post: Nov. 1 2008, 12:47 ET)
Without ruining something
Gap in a 1911?  (Started: Oct. 31 2008, 14:34 ET, Last post: Nov. 1 2008, 09:44 ET)
I have 300 rounds of gold dot gap ammo..
Bar  (Started: Oct. 26 2008, 17:00 ET, Last post: Oct. 28 2008, 18:10 ET)
Bar gas piston
Marlin mod 60 jams  (Started: Oct. 25 2008, 15:19 ET, Last post: Oct. 25 2008, 20:28 ET)
Mod 60 wont run
Chambering .22 with a no. 1  (Started: Oct. 24 2008, 21:10 ET, Last post: Oct. 25 2008, 20:12 ET)
Chamber reaming with a drill bit
Bolt will not close on rem 1100  (Started: Oct. 23 2008, 15:20 ET, Last post: Oct. 24 2008, 16:47 ET)
17hmr design  (Started: Oct. 22 2008, 15:02 ET, Last post: Oct. 23 2008, 10:25 ET)
Short recoil roller locking for a rifle?  (Started: Oct. 2 2008, 16:07 ET, Last post: Oct. 23 2008, 01:44 ET)
Ala mg-42 lmg /cz-52 pistol.
Rebarreling a m24/47 yugo  (Started: Oct. 21 2008, 15:27 ET, Last post: Oct. 22 2008, 21:01 ET)
94 winchester  (Started: Oct. 19 2008, 18:05 ET, Last post: Oct. 22 2008, 16:24 ET)
Modified?
Grounding machinery  (Started: Oct. 2 2008, 17:13 ET, Last post: Oct. 22 2008, 14:20 ET)
Full size mill
Which is more accurate free float or stablized?  (Started: Oct. 15 2008, 23:23 ET, Last post: Oct. 20 2008, 11:39 ET)
Cartridge conversion questions.  (Started: Oct. 9 2008, 19:22 ET, Last post: Oct. 19 2008, 16:56 ET)
T33 in 9x21mm, star b super in 7.62x25mm
Suggestions/diagnosis needed  (Started: Aug. 10 2008, 06:28 ET, Last post: Oct. 18 2008, 16:14 ET)
Martini  (Started: Oct. 13 2008, 18:45 ET, Last post: Oct. 16 2008, 01:10 ET)
How do you tell where a bullet is after shooting?  (Started: Oct. 10 2008, 23:22 ET, Last post: Oct. 15 2008, 23:04 ET)
Inside the barrel that is.
Reprofiling an ar-15 barrel?  (Started: Oct. 15 2008, 18:08 ET, Last post: Oct. 15 2008, 22:32 ET)
Fp hardening  (Started: Oct. 13 2008, 09:36 ET, Last post: Oct. 13 2008, 20:35 ET)
Self regulating gas booster on a recoil operation.  (Started: Oct. 12 2008, 02:22 ET, Last post: Oct. 13 2008, 07:20 ET)
Crazy idea or not?
3 lug pyramid bolt vs 7 lug ar-15 style?  (Started: Oct. 11 2008, 14:02 ET, Last post: Oct. 12 2008, 13:14 ET)
Is it as good as i think it is?
Handi-rifle .30-30 improved  (Started: Oct. 12 2008, 00:29 ET, Last post: Oct. 12 2008, 02:10 ET)
How to ream it.
"gas screw" idea alternative to 'pigtail' gas tube  (Started: Sep. 24 2008, 12:35 ET, Last post: Oct. 11 2008, 14:08 ET)
Is it the gun or the cartridge?  (Started: Oct. 9 2008, 06:42 ET, Last post: Oct. 11 2008, 02:24 ET)
Blazer cci ammunition  (Started: Oct. 10 2008, 00:33 ET, Last post: Oct. 10 2008, 09:54 ET)
Position of op-rod to barrel.  (Started: Oct. 7 2008, 13:42 ET, Last post: Oct. 9 2008, 22:57 ET)
In regards to accuracy, any info?
Checking the head space on my sharps  (Started: Oct. 3 2008, 07:16 ET, Last post: Oct. 7 2008, 22:16 ET)
M1 carbines  (Started: Oct. 2 2008, 15:35 ET, Last post: Oct. 7 2008, 12:02 ET)
Shotgun steel hardness  (Started: Oct. 5 2008, 12:05 ET, Last post: Oct. 7 2008, 01:20 ET)
Just how soft is it?
Ruger mini 14 - stuck bolt  (Started: Jul. 12 2006, 16:42 ET, Last post: Oct. 7 2008, 00:10 ET)
Stuck bolt
1895 marlin  (Started: Oct. 4 2008, 01:08 ET, Last post: Oct. 6 2008, 01:00 ET)
Rear sight off centered when zeroed.
Remington model 788 bolt work  (Started: Oct. 1 2008, 02:10 ET, Last post: Oct. 4 2008, 01:05 ET)
Can't get it to extract
How would i........  (Started: Sep. 30 2008, 21:10 ET, Last post: Oct. 2 2008, 13:53 ET)
Fit a loose barrel?
Tubing from office chairs?  (Started: Jul. 16 2008, 08:35 ET, Last post: Oct. 1 2008, 19:49 ET)
The hydraulic/pneumatic assembly...
Calculating gas pressure down the barrel.  (Started: Sep. 27 2008, 06:39 ET, Last post: Sep. 29 2008, 16:54 ET)
Easy way?
How would i make a mold?  (Started: Sep. 27 2008, 12:33 ET, Last post: Sep. 28 2008, 19:13 ET)
Barrel extention  (Started: Sep. 27 2008, 10:59 ET, Last post: Sep. 27 2008, 23:45 ET)
Dom tubing?
Making stag grips. where to look ?  (Started: Sep. 25 2008, 15:36 ET, Last post: Sep. 27 2008, 09:07 ET)
Repairing a 1858 new model army question...  (Started: Sep. 12 2008, 12:21 ET, Last post: Sep. 26 2008, 20:32 ET)
Need part for s&w sotgun  (Started: Sep. 26 2008, 09:45 ET, Last post: Sep. 26 2008, 19:54 ET)
Sig trailside safety  (Started: Sep. 26 2008, 16:54 ET, Last post: Sep. 26 2008, 19:37 ET)
Any ideas on 'recoil' buffers?  (Started: Sep. 23 2008, 12:58 ET, Last post: Sep. 25 2008, 21:03 ET)
Prevent a gun from beating itself up.
Para ordance warthog safety  (Started: Sep. 24 2008, 16:01 ET, Last post: Sep. 25 2008, 13:15 ET)
Boiling um blue,  (Started: Sep. 24 2008, 08:19 ET, Last post: Sep. 25 2008, 09:31 ET)
Id help.  (Started: Sep. 24 2008, 18:13 ET, Last post: Sep. 24 2008, 22:58 ET)
Do you know what this is?
Refinish a collectible ?  (Started: Sep. 20 2008, 10:44 ET, Last post: Sep. 23 2008, 10:44 ET)
When <50% finish remains?
Reaming .22 chamber  (Started: Sep. 21 2008, 23:05 ET, Last post: Sep. 22 2008, 21:50 ET)
No.1 drill possible?
Need a dim  (Started: Sep. 8 2008, 00:57 ET, Last post: Sep. 21 2008, 11:14 ET)
Rem 700
Stuck bolt rem 700  (Started: Sep. 20 2008, 14:30 ET, Last post: Sep. 21 2008, 01:22 ET)
Stuck bolt rem 700
Colt trooper  (Started: Sep. 19 2008, 21:32 ET, Last post: Sep. 19 2008, 21:32 ET)
Barrels
Attaching barrel liner  (Started: Aug. 26 2008, 15:19 ET, Last post: Sep. 19 2008, 21:13 ET)
Solder, acraglass, what?
Looking for a junk 7.62x39 barrel  (Started: Sep. 18 2008, 20:32 ET, Last post: Sep. 18 2008, 21:39 ET)
Shotgun choke  (Started: Sep. 17 2008, 20:25 ET, Last post: Sep. 18 2008, 19:50 ET)
Building a cetme  (Started: Sep. 16 2008, 17:29 ET, Last post: Sep. 17 2008, 15:53 ET)
What other parts will i need?
Weird .22rifle  (Started: Sep. 10 2008, 21:09 ET, Last post: Sep. 16 2008, 21:26 ET)
Anyone know anything about this?
Feg pa-63  (Started: Sep. 7 2008, 22:08 ET, Last post: Sep. 16 2008, 15:10 ET)
Reducing da pull and mag spring pressure
Browing hp dovetail angle?  (Started: Sep. 14 2008, 23:45 ET, Last post: Sep. 14 2008, 23:45 ET)
(sight dovetails)
22lr pressure curve  (Started: Sep. 6 2008, 08:13 ET, Last post: Sep. 12 2008, 20:30 ET)
Jeweling  (Started: Sep. 5 2008, 18:17 ET, Last post: Sep. 11 2008, 19:44 ET)
How many brushes per bolt
Shotgun barrels  (Started: Sep. 2 2008, 21:02 ET, Last post: Sep. 10 2008, 17:35 ET)
Fal accuracy question  (Started: Sep. 10 2008, 06:42 ET, Last post: Sep. 10 2008, 16:17 ET)
Hand cycling causes low strikes
17-4 receiver  (Started: Apr. 4 2008, 20:43 ET, Last post: Sep. 9 2008, 00:50 ET)
Hardness & heat treat
Shorten auto rifle barrel ?  (Started: Sep. 7 2008, 00:33 ET, Last post: Sep. 8 2008, 15:31 ET)
Mystery gun needs a name!  (Started: Sep. 4 2008, 13:38 ET, Last post: Sep. 7 2008, 23:34 ET)
Not extracting  (Started: Sep. 5 2008, 23:32 ET, Last post: Sep. 7 2008, 11:33 ET)
Savage 93r17
Have a problem with a home built .22 pistol.  (Started: Aug. 28 2008, 19:39 ET, Last post: Sep. 7 2008, 11:22 ET)
Beretta u-22  (Started: Sep. 6 2008, 06:59 ET, Last post: Sep. 6 2008, 06:59 ET)
Stuck safety
Size reamer for 12 ga. chamber?  (Started: Aug. 31 2008, 01:59 ET, Last post: Sep. 5 2008, 21:43 ET)
Smith & wesson model 1000 20ga.  (Started: Sep. 3 2008, 20:17 ET, Last post: Sep. 5 2008, 21:17 ET)
Won't eject low base shells.............
Stripped 6-48 threads  (Started: Sep. 2 2008, 12:19 ET, Last post: Sep. 5 2008, 10:47 ET)
Dom tubing safe for bp smoothbore?  (Started: Sep. 4 2008, 00:39 ET, Last post: Sep. 4 2008, 15:59 ET)
Well, is it?
Shotgun stock removal  (Started: Sep. 3 2008, 14:42 ET, Last post: Sep. 4 2008, 00:03 ET)
Bernardelli roma 3
9mm barrel.  (Started: Sep. 2 2008, 04:02 ET, Last post: Sep. 3 2008, 15:06 ET)
Help
Sharp's pepperbox  (Started: Sep. 1 2008, 15:25 ET, Last post: Sep. 3 2008, 13:46 ET)
Reising machine gun  (Started: Mar. 25 2008, 22:53 ET, Last post: Sep. 2 2008, 21:28 ET)
Anyone have blueprints or exploded veiws
Would it be strong enough?  (Started: Aug. 31 2008, 05:29 ET, Last post: Sep. 2 2008, 21:09 ET)
Size reamer for 12 ga. chamber?  (Started: Aug. 31 2008, 01:55 ET, Last post: Sep. 1 2008, 17:43 ET)
50 cal. bmg single shot  (Started: Aug. 25 2008, 14:47 ET, Last post: Aug. 31 2008, 16:05 ET)
M1 carbine 44 mag  (Started: Aug. 29 2008, 10:15 ET, Last post: Aug. 31 2008, 10:45 ET)
Enlarging the neck of a .303 chamber?  (Started: Aug. 20 2008, 23:48 ET, Last post: Aug. 31 2008, 02:57 ET)
No4 mki shooting cast bullets
Need help with polymer 1911 frame..  (Started: Aug. 30 2008, 04:54 ET, Last post: Aug. 30 2008, 22:23 ET)
Damaged  mag release area..?wecsog fix
Jewelling problem  (Started: Aug. 28 2008, 06:08 ET, Last post: Aug. 29 2008, 18:43 ET)
45/70 to 45/120  (Started: Aug. 26 2008, 19:17 ET, Last post: Aug. 29 2008, 01:48 ET)
Pedersoli sharps
Soldering  (Started: Aug. 27 2008, 15:28 ET, Last post: Aug. 28 2008, 23:45 ET)
Rossi 20 ga sxs coach shot gun
Browning bar gas ports  (Started: Aug. 27 2008, 19:47 ET, Last post: Aug. 28 2008, 23:10 ET)
Why there is no project of o/u shotgun?  (Started: Jul. 31 2008, 14:53 ET, Last post: Aug. 28 2008, 08:08 ET)
Floating chamber  (Started: Aug. 23 2008, 01:17 ET, Last post: Aug. 26 2008, 20:13 ET)
.357 ruger new model blackhawk  (Started: Aug. 14 2008, 20:18 ET, Last post: Aug. 25 2008, 14:58 ET)
9mm comversion?
P22 site upgrade  (Started: Aug. 15 2008, 14:40 ET, Last post: Aug. 24 2008, 17:54 ET)
Double barrel frame pin  (Started: Aug. 21 2008, 15:05 ET, Last post: Aug. 21 2008, 23:25 ET)
Pin drifting
Smart? or not so smart?  (Started: Aug. 21 2008, 09:19 ET, Last post: Aug. 21 2008, 15:47 ET)
Suppressor related
Winchester 94  (Started: Aug. 14 2008, 21:14 ET, Last post: Aug. 20 2008, 18:48 ET)
Barrels
Need a diagnosis please  (Started: Aug. 18 2008, 20:39 ET, Last post: Aug. 19 2008, 16:10 ET)
Unique pocket pistol  (Started: Aug. 11 2008, 18:13 ET, Last post: Aug. 14 2008, 13:49 ET)
With pictures :)
Hydrogen embrittlement with water based cleaning?  (Started: Aug. 12 2008, 16:31 ET, Last post: Aug. 13 2008, 00:49 ET)
A serious concern?
Sig sights  (Started: Aug. 10 2008, 13:00 ET, Last post: Aug. 11 2008, 03:32 ET)
Help with selecting a spotting scope?  (Started: Aug. 9 2008, 00:14 ET, Last post: Aug. 10 2008, 12:58 ET)
Mossberg 402 extractor question  (Started: Aug. 9 2008, 06:20 ET, Last post: Aug. 9 2008, 15:50 ET)
Trying to identify an old smith & wesson  (Started: Aug. 8 2008, 18:31 ET, Last post: Aug. 8 2008, 21:58 ET)
What cartridge should it use?
Ar-15 barrel blank  (Started: Aug. 5 2008, 14:31 ET, Last post: Aug. 7 2008, 14:16 ET)
Precharged pneumatic pcp  (Started: Jul. 14 2008, 19:47 ET, Last post: Aug. 5 2008, 17:19 ET)
A real air rifle
Winchester extractor  (Started: Aug. 4 2008, 12:54 ET, Last post: Aug. 5 2008, 13:22 ET)
May i borrow your brains?  (Started: Jul. 17 2008, 10:36 ET, Last post: Aug. 5 2008, 09:12 ET)
Bearing/turntable problem
Material question  (Started: Aug. 4 2008, 11:04 ET, Last post: Aug. 4 2008, 23:12 ET)
Question about a form 1 suppressor design  (Started: Jan. 28 2008, 17:28 ET, Last post: Aug. 3 2008, 09:48 ET)
Looking for input from swede and hotguns
Bullnose ruger  (Started: Jul. 30 2008, 18:44 ET, Last post: Jul. 31 2008, 19:50 ET)
Any help?
.410 shotgun chambering without a reamer  (Started: Jun. 23 2008, 12:16 ET, Last post: Jul. 28 2008, 10:51 ET)
Savage model 10 ejector question?  (Started: Jul. 24 2008, 23:36 ET, Last post: Jul. 27 2008, 15:29 ET)
How to remove ejector
Scope a k frame  (Started: Jul. 26 2008, 10:45 ET, Last post: Jul. 26 2008, 21:55 ET)
(without drilling)
Ruger stock..  (Started: Jul. 19 2008, 17:14 ET, Last post: Jul. 25 2008, 22:09 ET)
Worth?
Deth502 --- need help on blow back bolt math  (Started: Jul. 22 2008, 12:59 ET, Last post: Jul. 25 2008, 18:06 ET)
Adding ar-15 stock to mac-10
Smith & wesson sn#s?  (Started: Jul. 23 2008, 03:51 ET, Last post: Jul. 25 2008, 12:32 ET)
Barrel liners  (Started: Jul. 24 2008, 17:46 ET, Last post: Jul. 24 2008, 20:50 ET)
Dumb question
Threading for supressor.  (Started: Jul. 21 2008, 19:49 ET, Last post: Jul. 24 2008, 11:04 ET)
Aligning threads/shoulder to bore
572 fieldmaster  (Started: Jul. 23 2008, 18:05 ET, Last post: Jul. 24 2008, 01:21 ET)
My power supply took a dump  (Started: Jul. 11 2008, 12:24 ET, Last post: Jul. 19 2008, 20:30 ET)
I need a new one...
What pitch are the threads on a carcano barrel?  (Started: Nov. 8 2007, 18:10 ET, Last post: Jul. 18 2008, 22:06 ET)
Smithy bz 239 x-y will not engage  (Started: Jul. 15 2008, 22:15 ET, Last post: Jul. 17 2008, 15:53 ET)
X-y auto feed will not engage
Ruger mk2 trigger job  (Started: Jul. 15 2008, 20:47 ET, Last post: Jul. 17 2008, 02:42 ET)
Trigger finger has nerve damage.
About this barrel,  (Started: Jul. 14 2008, 08:04 ET, Last post: Jul. 16 2008, 23:40 ET)
Question about a part from numrichs  (Started: Jul. 13 2008, 19:35 ET, Last post: Jul. 16 2008, 09:59 ET)
Striker vs hammer  (Started: Jul. 15 2008, 14:35 ET, Last post: Jul. 15 2008, 18:28 ET)
Reliability, accuracy, precision
Variable pitch rifling  (Started: Jul. 2 2008, 19:48 ET, Last post: Jul. 15 2008, 09:58 ET)
Would it work?
Buttstock through bolt  (Started: Jul. 14 2008, 19:32 ET, Last post: Jul. 14 2008, 23:03 ET)
What size threads?
Mosin nagant barrel  (Started: Jun. 27 2008, 02:23 ET, Last post: Jul. 14 2008, 10:21 ET)
Hardening stainless  (Started: Mar. 27 2008, 15:36 ET, Last post: Jul. 14 2008, 08:21 ET)
Cz 52  (Started: Jul. 9 2008, 00:52 ET, Last post: Jul. 13 2008, 16:04 ET)
Pistol shoots hard to left.
Double barrel revolver  (Started: Jun. 10 2008, 19:53 ET, Last post: Jul. 13 2008, 13:37 ET)
Gold plating  (Started: Jul. 10 2008, 22:24 ET, Last post: Jul. 12 2008, 22:19 ET)
Gold plating where to get supplies
Finnwolf  (Started: Jul. 8 2008, 04:00 ET, Last post: Jul. 12 2008, 17:20 ET)
Custom engraving  (Started: Jul. 5 2008, 21:59 ET, Last post: Jul. 11 2008, 14:49 ET)
Need some work done
Remington 600 action  (Started: Jul. 7 2008, 18:05 ET, Last post: Jul. 10 2008, 16:47 ET)
Brno vz24 stock  (Started: Jun. 27 2008, 14:15 ET, Last post: Jul. 9 2008, 12:04 ET)
What other mauser stocks will work?
Anyone doing duckbill spreaders?  (Started: Jul. 2 2008, 23:52 ET, Last post: Jul. 9 2008, 11:29 ET)
Springfield m6 ?  (Started: Apr. 13 2008, 02:18 ET, Last post: Jul. 8 2008, 21:40 ET)
Anyone here make a combo?
Any makarov gurus?  (Started: Jul. 7 2008, 16:39 ET, Last post: Jul. 7 2008, 19:02 ET)
Failure to chamber
Daly vs. browning hp?  (Started: Jul. 3 2008, 22:47 ET, Last post: Jul. 5 2008, 18:04 ET)
Are the daly hps any good?
Old military lube...  what's it good for?  (Started: Jul. 2 2008, 17:06 ET, Last post: Jul. 5 2008, 12:52 ET)
Lsa-t lube, semi-fluid
Scope mounting on savage model 10?  (Started: Jul. 2 2008, 19:34 ET, Last post: Jul. 2 2008, 20:20 ET)
Winchester 94 in 44 mag needs spring  (Started: Jul. 2 2008, 08:02 ET, Last post: Jul. 2 2008, 08:36 ET)
Wire spring on right hand cartridge guid
How to alter a 98 mauser bolt face  (Started: May 27 2008, 10:32 ET, Last post: Jun. 29 2008, 21:01 ET)
.223 remington mauser bolt face
Silver solder question  (Started: Jun. 24 2008, 22:54 ET, Last post: Jun. 24 2008, 22:54 ET)
Brownells low temp solder
O/u sling swivels  (Started: Jun. 24 2008, 09:45 ET, Last post: Jun. 24 2008, 09:45 ET)
Ordering & installing
Falling block  (Started: Jun. 20 2008, 17:57 ET, Last post: Jun. 23 2008, 19:41 ET)
I need a plan
Taurus revolver barrel thread pitch?  (Started: Jun. 23 2008, 14:53 ET, Last post: Jun. 23 2008, 16:10 ET)
For the mid-size wheelguns
Calling all bp gurus  (Started: Jun. 20 2008, 17:27 ET, Last post: Jun. 23 2008, 10:08 ET)
Sleeving breech - best way?  (Started: Jun. 22 2008, 20:32 ET, Last post: Jun. 23 2008, 09:56 ET)
Best way to attach sleeve?
Pre 64 winchester scope mount  (Started: Jun. 16 2008, 19:14 ET, Last post: Jun. 19 2008, 10:27 ET)
Don't want to hurt the value of the gun.
9mm headspace gauge measurements.  (Started: Jun. 17 2008, 16:49 ET, Last post: Jun. 17 2008, 21:32 ET)
Kt ord 1911 frames  (Started: Jun. 15 2008, 22:25 ET, Last post: Jun. 16 2008, 09:53 ET)
?
Welding bolt handles  (Started: Jun. 7 2008, 18:04 ET, Last post: Jun. 15 2008, 13:09 ET)
Welding mauser bolt handles using mig
How to make a free spin pawl?  (Started: Jun. 10 2008, 23:10 ET, Last post: Jun. 11 2008, 22:38 ET)
For ruger single actions?
Blow back action  (Started: Jun. 6 2008, 11:28 ET, Last post: Jun. 10 2008, 19:02 ET)
I'll try this again
Lost topic  (Started: Jun. 8 2008, 15:46 ET, Last post: Jun. 10 2008, 13:36 ET)
Can't find artical on round block fallin
7 x 57 neck dia  (Started: Jun. 10 2008, 00:18 ET, Last post: Jun. 10 2008, 12:21 ET)
Reamer
Sights on a ruger new model blackhawk  (Started: Jun. 8 2008, 00:01 ET, Last post: Jun. 10 2008, 03:44 ET)
Removal of sights from pistol
Shotgun porting  (Started: Jun. 4 2008, 15:33 ET, Last post: Jun. 10 2008, 03:34 ET)
Any advice ?
Deep chambered m-1 barrel  (Started: Jun. 9 2008, 03:56 ET, Last post: Jun. 10 2008, 02:35 ET)
Measuring chamber depth
Looking for advise for fixing my shotgun barrel  (Started: Apr. 20 2008, 17:12 ET, Last post: Jun. 8 2008, 15:10 ET)
What would you do for a diy fix at home?
Holding a barrel in chuck  (Started: Jun. 6 2008, 14:40 ET, Last post: Jun. 8 2008, 12:17 ET)
Remington 7400 recoil pad installation question  (Started: May 23 2008, 22:44 ET, Last post: Jun. 7 2008, 18:19 ET)
Does it effect the cycling?
Correct way to clean my remington 74?  (Started: Jun. 7 2008, 18:04 ET, Last post: Jun. 7 2008, 18:04 ET)
Steel hardening  (Started: Jun. 6 2008, 15:18 ET, Last post: Jun. 7 2008, 12:51 ET)
Sorry if this thread has come up before
.22 hornet blow back action  (Started: Jun. 5 2008, 12:05 ET, Last post: Jun. 7 2008, 00:37 ET)
Possable or not
Hoffman, ardmore ok rifle  (Started: May 20 2008, 13:00 ET, Last post: Jun. 6 2008, 11:11 ET)
.375 magnum
Barrel thread for barnard type-s action  (Started: Jun. 4 2008, 22:45 ET, Last post: Jun. 6 2008, 04:38 ET)
Need exact dimension of barrel thread
Captive piston ammo? class ii? if so why?  (Started: May 31 2008, 20:16 ET, Last post: Jun. 4 2008, 14:22 ET)
Bullet stuck in bore  (Started: May 20 2008, 00:29 ET, Last post: Jun. 3 2008, 21:43 ET)
Need advice to remove
M-14 mini 14  (Started: Jun. 2 2008, 18:58 ET, Last post: Jun. 3 2008, 18:59 ET)
Hmm
Smoothbore barrels  (Started: May 25 2008, 07:13 ET, Last post: Jun. 3 2008, 13:31 ET)
Precision of a smoothbore 9mm pistol
Threading: making two mating threads  (Started: Jun. 2 2008, 12:15 ET, Last post: Jun. 2 2008, 20:08 ET)
How to determine minor/major diameters?
.76 tight enough for .75?  (Started: May 25 2008, 21:30 ET, Last post: May 30 2008, 22:12 ET)
Barrel blanks  (Started: May 28 2008, 22:42 ET, Last post: May 29 2008, 18:49 ET)
Front sight pusher for the lee enfield #5 mk1  (Started: May 25 2008, 02:22 ET, Last post: May 27 2008, 02:23 ET)
Anyone heard of one?
Stevens model 58 shotgun  (Started: Aug. 21 2007, 11:43 ET, Last post: May 26 2008, 12:40 ET)
Need info
Need a cc pistol for my girl  (Started: May 6 2008, 10:06 ET, Last post: May 25 2008, 12:51 ET)
Thinking .380 auto
Pictolinks  (Started: May 21 2008, 18:16 ET, Last post: May 24 2008, 23:55 ET)
How do i do it
Building custom revolvers  (Started: May 20 2008, 00:55 ET, Last post: May 24 2008, 19:57 ET)
Need instructions/books
Glock gurus  (Started: May 23 2008, 20:14 ET, Last post: May 23 2008, 23:06 ET)
How, what and why
Help identifing mauser model  (Started: May 21 2008, 22:48 ET, Last post: May 23 2008, 09:37 ET)
Stevens 77h takedown?????  (Started: May 12 2008, 01:33 ET, Last post: May 22 2008, 13:25 ET)
Good first project?  (Started: May 22 2008, 01:19 ET, Last post: May 22 2008, 09:58 ET)
Colt 1911
Ar-7 clone  (Started: May 22 2008, 03:00 ET, Last post: May 22 2008, 03:00 ET)
Rfi
New kto  80%  1911  (Started: May 21 2008, 10:17 ET, Last post: May 21 2008, 10:17 ET)
Is it doable ??
Smith in the houston area?  (Started: May 15 2008, 03:05 ET, Last post: May 21 2008, 08:45 ET)
Kel tec p3at  (Started: Oct. 10 2007, 01:46 ET, Last post: May 20 2008, 09:33 ET)
Aluminum frame build ?
Chambering question  (Started: May 18 2008, 20:45 ET, Last post: May 18 2008, 20:58 ET)
Rotary phse converter - shop made  (Started: May 15 2008, 18:34 ET, Last post: May 16 2008, 22:17 ET)
(from static converter and 3-phase motor
Trigger mechanism references?  (Started: May 16 2008, 12:20 ET, Last post: May 16 2008, 12:20 ET)
Porting a shotgun???  (Started: May 8 2008, 19:48 ET, Last post: May 11 2008, 09:47 ET)
Need help with tip-up design  (Started: Mar. 18 2008, 21:21 ET, Last post: May 11 2008, 09:39 ET)
Rerun in progress
Stamping a frame ...  (Started: May 3 2008, 04:33 ET, Last post: May 9 2008, 09:12 ET)
Adding a lil i.d. to your build ?
Rohm rg 10  (Started: May 6 2008, 16:26 ET, Last post: May 8 2008, 16:08 ET)
New to bluing  (Started: Mar. 30 2008, 02:13 ET, Last post: May 7 2008, 16:08 ET)
Just got tanks
Cz82 polymer finish  (Started: Apr. 20 2008, 05:08 ET, Last post: May 7 2008, 16:00 ET)
Ways needed to remove the finish?
Cal changing  (Started: May 5 2008, 19:49 ET, Last post: May 7 2008, 01:43 ET)
Fake cans  (Started: Apr. 6 2008, 17:22 ET, Last post: May 7 2008, 00:03 ET)
Legal and what effect on noise
30-40 krag imp can i shot 30-40 krag in it?  (Started: May 3 2008, 21:47 ET, Last post: May 6 2008, 08:36 ET)
Harbor freight tool and cutter grinders  (Started: May 2 2008, 03:52 ET, Last post: May 6 2008, 04:36 ET)
What can it do and how to do it?
Feeding problem with mossberg bolt action shot gun  (Started: May 4 2008, 20:32 ET, Last post: May 5 2008, 11:13 ET)
"the brownie"  (Started: May 4 2008, 10:53 ET, Last post: May 4 2008, 22:36 ET)
Hopkins and allen .22 rifle?
Goof off idea maybe .32 acp 12 ga insert  (Started: Apr. 18 2008, 09:26 ET, Last post: May 4 2008, 09:45 ET)
20 tactical  (Started: May 2 2008, 23:54 ET, Last post: May 2 2008, 23:54 ET)
Making barrels
Rebating cartridge rims  (Started: Apr. 29 2008, 20:33 ET, Last post: May 2 2008, 15:40 ET)
Collet to hold them
Punt gun project needs big or long bed lathe  (Started: Apr. 25 2008, 21:25 ET, Last post: Apr. 30 2008, 21:11 ET)
Lathe help needed for punt gun project
Rossi 1892 feeding problems  (Started: Apr. 29 2008, 09:33 ET, Last post: Apr. 30 2008, 12:40 ET)
How to fix
Hollands recoil lug  (Started: Apr. 28 2008, 04:57 ET, Last post: Apr. 29 2008, 04:44 ET)
Savage 219 b  (Started: Apr. 24 2008, 11:11 ET, Last post: Apr. 26 2008, 03:09 ET)
Slide locks open before the last shot  (Started: Apr. 22 2008, 14:49 ET, Last post: Apr. 24 2008, 22:15 ET)
Slide locks open before the last shot
Marlin model 60  (Started: Apr. 18 2008, 11:24 ET, Last post: Apr. 24 2008, 21:57 ET)
Kydex questions  (Started: Apr. 23 2008, 14:03 ET, Last post: Apr. 24 2008, 19:43 ET)
Another mossberg 46b question  (Started: Apr. 7 2008, 17:28 ET, Last post: Apr. 24 2008, 02:44 ET)
Bolt disassembly
Weaver v-22 scope  (Started: Apr. 10 2008, 14:19 ET, Last post: Apr. 24 2008, 02:27 ET)
Removal of rings
Rifled shotgun barrel blank???  (Started: Apr. 23 2008, 15:20 ET, Last post: Apr. 23 2008, 22:53 ET)
Do they exist???
H r trqpper .22 revolver  (Started: Apr. 19 2008, 00:39 ET, Last post: Apr. 23 2008, 22:11 ET)
Needs cylinder tightening
Degreasing  (Started: Apr. 20 2008, 17:06 ET, Last post: Apr. 20 2008, 23:44 ET)
Filing chalk?  (Started: Mar. 4 2008, 13:36 ET, Last post: Apr. 20 2008, 23:42 ET)
What is it?
Help please!  (Started: Apr. 15 2008, 12:08 ET, Last post: Apr. 20 2008, 19:17 ET)
Sportsman 48
1911 disasembly revers plug  (Started: Apr. 19 2008, 14:09 ET, Last post: Apr. 19 2008, 23:34 ET)
1911 disasembly revers plug
10mm/40cal  (Started: Apr. 14 2008, 20:14 ET, Last post: Apr. 18 2008, 22:20 ET)
Looking for brl blanks
Cutting grooves for dovetail sights ?  (Started: Apr. 17 2008, 21:16 ET, Last post: Apr. 18 2008, 20:25 ET)
New barrel for sig p225  (Started: Apr. 17 2008, 08:52 ET, Last post: Apr. 17 2008, 20:04 ET)
Source for new barrel
Double set trigger design  (Started: Apr. 14 2008, 15:36 ET, Last post: Apr. 15 2008, 21:52 ET)
1911 full scale blueprints  (Started: Apr. 14 2008, 11:19 ET, Last post: Apr. 15 2008, 16:35 ET)
Help me id this old revolver  (Started: Apr. 11 2008, 19:07 ET, Last post: Apr. 11 2008, 21:18 ET)
Slug choke  (Started: Apr. 9 2008, 09:44 ET, Last post: Apr. 10 2008, 13:00 ET)
Mossberg 46b .22 rimfire  (Started: Apr. 6 2008, 00:59 ET, Last post: Apr. 8 2008, 15:29 ET)
Stoning firing pin lug
Rem modle 12 .22 cal.???  (Started: Apr. 4 2008, 19:41 ET, Last post: Apr. 6 2008, 11:44 ET)
Enfield no 4 mk 1 .303  (Started: Apr. 6 2008, 01:12 ET, Last post: Apr. 6 2008, 02:54 ET)
Markings questions
Marlin 12 ga. shotgun info needed  (Started: Apr. 5 2008, 00:25 ET, Last post: Apr. 5 2008, 22:12 ET)
(sorry guys, no photos)
Chambering a barrel  (Started: Apr. 3 2008, 21:09 ET, Last post: Apr. 5 2008, 09:44 ET)
Zinc plate removal  (Started: Apr. 1 2008, 14:51 ET, Last post: Apr. 4 2008, 11:13 ET)
What are these parts to?  (Started: Apr. 1 2008, 01:03 ET, Last post: Apr. 2 2008, 15:31 ET)
Is it a fal kit?
Sig front sight cut  (Started: Mar. 30 2008, 22:37 ET, Last post: Mar. 30 2008, 22:37 ET)
Anybody know the deminsions?
Free floating the barrel and the action  (Started: Mar. 29 2008, 11:56 ET, Last post: Mar. 30 2008, 00:00 ET)
Think this could be done???
.410 enfield ishapore musket  (Started: Mar. 1 2008, 23:57 ET, Last post: Mar. 28 2008, 22:33 ET)
Sarco  (Started: Mar. 28 2008, 19:51 ET, Last post: Mar. 28 2008, 22:02 ET)
No not april fools
9mm barrels  (Started: Mar. 28 2008, 13:41 ET, Last post: Mar. 28 2008, 16:25 ET)
Little help
T c contender barrel parts  (Started: Mar. 28 2008, 13:24 ET, Last post: Mar. 28 2008, 13:24 ET)
T c contender barrel parts
Dad's old shotgun  (Started: Mar. 25 2008, 17:29 ET, Last post: Mar. 27 2008, 17:52 ET)
This idea for "rifling"-method possible?  (Started: Mar. 21 2008, 15:26 ET, Last post: Mar. 27 2008, 02:47 ET)
Air rifle barrel
High standard supermatic trophy  (Started: Mar. 25 2008, 14:09 ET, Last post: Mar. 26 2008, 23:23 ET)
Feeding problems
Tune up information 1873 rifle  (Started: Mar. 25 2008, 09:18 ET, Last post: Mar. 25 2008, 09:18 ET)
Stainless steel  (Started: Mar. 16 2008, 05:14 ET, Last post: Mar. 24 2008, 23:48 ET)
Quality barrels  (Started: Mar. 22 2008, 03:41 ET, Last post: Mar. 24 2008, 11:49 ET)
Who makes an accurate blank?
Rusty 30-30  (Started: Mar. 21 2008, 14:08 ET, Last post: Mar. 23 2008, 12:59 ET)
Barrel free-floating  (Started: Mar. 20 2008, 22:26 ET, Last post: Mar. 23 2008, 12:58 ET)
What about break open single shot rifles
Barrel removal on s&w 61-3 in .22 lr  (Started: Mar. 18 2008, 19:42 ET, Last post: Mar. 22 2008, 19:26 ET)
Vivaek cnc mill  (Started: Mar. 21 2008, 16:48 ET, Last post: Mar. 22 2008, 16:02 ET)
Magazine tube thread sizes  (Started: Mar. 21 2008, 17:53 ET, Last post: Mar. 21 2008, 17:53 ET)
Winchester x2, browning gold
New model single six  (Started: Mar. 6 2008, 00:42 ET, Last post: Mar. 21 2008, 17:22 ET)
Heat treat  (Started: Mar. 20 2008, 03:57 ET, Last post: Mar. 21 2008, 11:04 ET)
Fitting 1911 match bushingre: barrel springing  (Started: Mar. 18 2008, 19:41 ET, Last post: Mar. 21 2008, 08:39 ET)
Hand cut dovetails  (Started: Mar. 4 2008, 14:31 ET, Last post: Mar. 20 2008, 12:05 ET)
Dovetails
Ml 209 breechplug query  (Started: Jan. 29 2008, 23:59 ET, Last post: Mar. 20 2008, 10:56 ET)
Appliance epoxy paint  (Started: Mar. 19 2008, 15:06 ET, Last post: Mar. 20 2008, 10:01 ET)
Will it work on aluminum
No1,mkiii lithgow  (Started: Mar. 12 2008, 14:31 ET, Last post: Mar. 20 2008, 00:49 ET)
Scope problem  (Started: Mar. 12 2008, 20:38 ET, Last post: Mar. 19 2008, 18:29 ET)
No one wants to fix it
What i want to make  (Started: Mar. 14 2008, 20:44 ET, Last post: Mar. 19 2008, 02:00 ET)
Picking a steel for building a 50bmg action  (Started: Mar. 16 2008, 22:41 ET, Last post: Mar. 17 2008, 17:35 ET)
Shell casing sticking.  (Started: Mar. 12 2008, 01:17 ET, Last post: Mar. 17 2008, 02:03 ET)
Romanian cugir single shot trainer
Motors  (Started: Mar. 15 2008, 01:36 ET, Last post: Mar. 15 2008, 19:06 ET)
Ruger no. 1  (Started: Mar. 10 2008, 18:51 ET, Last post: Mar. 12 2008, 10:02 ET)
Caliber change ?
Remington 770  (Started: Mar. 11 2008, 16:25 ET, Last post: Mar. 11 2008, 17:09 ET)
Mauser trigger  (Started: Mar. 6 2008, 20:34 ET, Last post: Mar. 11 2008, 00:12 ET)
How to improve it
S&w breaktop  (Started: Mar. 10 2008, 09:05 ET, Last post: Mar. 10 2008, 09:05 ET)
Spotting fakes
Thanks to all  (Started: Mar. 3 2008, 19:31 ET, Last post: Mar. 8 2008, 21:33 ET)
Thanks for all your imput
Win model 190  (Started: Mar. 7 2008, 16:26 ET, Last post: Mar. 7 2008, 18:21 ET)
Cooey extrator  (Started: Mar. 6 2008, 22:17 ET, Last post: Mar. 7 2008, 00:41 ET)
M91  (Started: Feb. 29 2008, 16:42 ET, Last post: Mar. 6 2008, 21:19 ET)
Those cheap rifles at big5
.380 in a .38 cal revolver?  (Started: Feb. 27 2008, 23:39 ET, Last post: Mar. 6 2008, 18:27 ET)
Can this be done?
Timing cap and ball revolvers  (Started: Mar. 5 2008, 14:53 ET, Last post: Mar. 5 2008, 18:15 ET)
Timing cap and ball revolvers
Islamic gun sights?  (Started: Dec. 2 2007, 13:50 ET, Last post: Mar. 5 2008, 02:40 ET)
Serious question
Problems with homemade curing oven  (Started: Feb. 29 2008, 14:40 ET, Last post: Mar. 4 2008, 23:12 ET)
Need ideas
.22lr minimum chamber wall thickness  (Started: Feb. 28 2008, 22:01 ET, Last post: Mar. 4 2008, 18:30 ET)
Cetme question  (Started: Feb. 3 2008, 17:51 ET, Last post: Mar. 4 2008, 03:16 ET)
Ithaca shotgun repair?  (Started: Feb. 29 2008, 20:38 ET, Last post: Mar. 1 2008, 21:13 ET)
I think its out of the question...
Taurus 605  (Started: Feb. 28 2008, 16:37 ET, Last post: Feb. 29 2008, 10:55 ET)
Front site changable?
Threads not the right pitch  (Started: Feb. 4 2008, 19:37 ET, Last post: Feb. 28 2008, 18:35 ET)
Wt 11x26 threads
I need help with a chamber reaming problem  (Started: Feb. 25 2008, 20:34 ET, Last post: Feb. 28 2008, 15:24 ET)
Reaming by hand
Bonehill double 12 ga  (Started: Feb. 27 2008, 02:39 ET, Last post: Feb. 28 2008, 02:26 ET)
Side play
Revolver barrel length  (Started: Jan. 10 2008, 15:49 ET, Last post: Feb. 27 2008, 16:27 ET)
Build a gun myself -find parts where?  (Started: Feb. 27 2008, 13:11 ET, Last post: Feb. 27 2008, 15:53 ET)
About building a gun myself
Finishing a 22lr reamer  (Started: Jan. 14 2008, 07:46 ET, Last post: Feb. 27 2008, 00:22 ET)
25-08  (Started: Feb. 25 2008, 00:19 ET, Last post: Feb. 26 2008, 08:53 ET)
Any one ever built one
Cutting threads  (Started: Feb. 23 2008, 14:40 ET, Last post: Feb. 25 2008, 22:36 ET)
New to lathe question
Beretta 92 os trigger pins?  (Started: Feb. 24 2008, 13:58 ET, Last post: Feb. 25 2008, 21:03 ET)
Looking for a source
Ruger 10/22 receiver threading  (Started: Feb. 24 2008, 12:16 ET, Last post: Feb. 24 2008, 16:38 ET)
Question about steel  (Started: Feb. 21 2008, 01:11 ET, Last post: Feb. 24 2008, 08:58 ET)
What type will be best
Homemade 22lr receiver & bolt  (Started: Dec. 4 2007, 16:26 ET, Last post: Feb. 24 2008, 05:12 ET)
Mauser broomhandle  (Started: Feb. 22 2008, 20:53 ET, Last post: Feb. 23 2008, 21:20 ET)
Re-barreling
Dovetail front sight tolerance  (Started: Feb. 21 2008, 11:07 ET, Last post: Feb. 23 2008, 10:13 ET)
410 shotgun barrel  (Started: Feb. 15 2008, 09:06 ET, Last post: Feb. 22 2008, 20:59 ET)
410 shotgun barrel
Soldering ak rails?  (Started: Feb. 19 2008, 13:37 ET, Last post: Feb. 22 2008, 17:43 ET)
Replacing barrel on high standard sentinel revolve  (Started: Feb. 20 2008, 19:01 ET, Last post: Feb. 22 2008, 07:30 ET)
Anyone ever done this?
Winchester 1873 replacement parts  (Started: Feb. 16 2008, 01:25 ET, Last post: Feb. 22 2008, 01:12 ET)
Replacement parts
Forcing cone dimensions?  (Started: Feb. 18 2008, 21:52 ET, Last post: Feb. 19 2008, 22:27 ET)
For revolver barrels
S&w cylnder sticking  (Started: Feb. 18 2008, 15:35 ET, Last post: Feb. 18 2008, 18:47 ET)
Sticking s&w cylinder
Shotgun inserts  (Started: Feb. 16 2008, 07:05 ET, Last post: Feb. 18 2008, 11:32 ET)
Aluminum?
22mag  (Started: Feb. 7 2008, 21:00 ET, Last post: Feb. 18 2008, 03:14 ET)
22lr to 22 mag
870 opening on firing ?  (Started: Feb. 15 2008, 12:18 ET, Last post: Feb. 17 2008, 01:26 ET)
Help! broken bit problem  (Started: Feb. 14 2008, 12:24 ET, Last post: Feb. 16 2008, 21:03 ET)
Airgun design question  (Started: Feb. 13 2008, 10:19 ET, Last post: Feb. 16 2008, 11:22 ET)
Formula or calculator would be nice!
Which gun for old caliber  (Started: Feb. 5 2008, 23:34 ET, Last post: Feb. 16 2008, 09:59 ET)
Win 70 chg. to .280 ai  (Started: Feb. 15 2008, 18:10 ET, Last post: Feb. 16 2008, 02:04 ET)
Which other cals. may be rmd. to .280 ai
Need to find machine screw  (Started: Feb. 14 2008, 14:46 ET, Last post: Feb. 15 2008, 07:56 ET)
I lost it!!
If i were building a 9mm blowback carbine...  (Started: Feb. 9 2008, 16:29 ET, Last post: Feb. 15 2008, 06:05 ET)
Can anbody explain the shotgun?  (Started: Feb. 13 2008, 08:31 ET, Last post: Feb. 14 2008, 23:48 ET)
Remington 788 thread size  (Started: Feb. 14 2008, 01:50 ET, Last post: Feb. 14 2008, 11:06 ET)
Where can i buy chamber reamers for 7.62x25mm  (Started: Feb. 12 2008, 09:52 ET, Last post: Feb. 12 2008, 21:14 ET)
Help with barrel block  (Started: Feb. 10 2008, 19:47 ET, Last post: Feb. 11 2008, 23:59 ET)
Remington 870 express  (Started: Feb. 8 2008, 20:27 ET, Last post: Feb. 11 2008, 20:10 ET)
Sig stg57/pe57 measurements  (Started: Feb. 3 2008, 21:01 ET, Last post: Feb. 11 2008, 19:22 ET)
Need some #'s
Ak sight and gas block removal??  (Started: Feb. 6 2008, 10:34 ET, Last post: Feb. 10 2008, 12:45 ET)
Best way to get them off the barrel?
What size tap do i need for a #11 drill bit hole  (Started: Feb. 9 2008, 21:18 ET, Last post: Feb. 10 2008, 00:27 ET)
Two oddballs  (Started: Feb. 4 2008, 15:38 ET, Last post: Feb. 9 2008, 18:15 ET)
What is this?
Filling in stamps on a 1911 slide  (Started: Jan. 18 2008, 01:12 ET, Last post: Feb. 9 2008, 05:08 ET)
Stevens 94c shotgun  (Started: Feb. 2 2008, 19:38 ET, Last post: Feb. 9 2008, 00:36 ET)
1911a  (Started: Feb. 8 2008, 18:51 ET, Last post: Feb. 8 2008, 19:34 ET)
Frame heat treatment
Ar15 brl extension torque  (Started: Feb. 6 2008, 07:30 ET, Last post: Feb. 8 2008, 07:33 ET)
How much?
Uberti stallion and other sa revolvers?  (Started: Feb. 7 2008, 09:49 ET, Last post: Feb. 8 2008, 01:52 ET)
Still have the itch!
Wheeler scope mount jig problem  (Started: Feb. 6 2008, 11:47 ET, Last post: Feb. 8 2008, 01:49 ET)
Brl alignment in lathe  (Started: Jan. 21 2008, 18:31 ET, Last post: Feb. 7 2008, 18:40 ET)
How far out is ok
How to remove ruger's revs. firing pin?  (Started: Feb. 6 2008, 21:10 ET, Last post: Feb. 6 2008, 21:29 ET)
Can anyone identify this slide?  (Started: Feb. 5 2008, 11:10 ET, Last post: Feb. 6 2008, 20:16 ET)
Can anyone identify this slide?
22rf chamber leade is rough?  (Started: Feb. 5 2008, 21:38 ET, Last post: Feb. 6 2008, 00:20 ET)
Noble 40n shotgun extractor help.  (Started: Feb. 3 2008, 23:57 ET, Last post: Feb. 5 2008, 23:51 ET)
Fire mission fire for effect   mg47! /74  (Started: Feb. 4 2008, 23:27 ET, Last post: Feb. 5 2008, 15:58 ET)
Have you seen the gunco post?
P1/p38 blueprint  (Started: Jan. 18 2008, 08:57 ET, Last post: Feb. 4 2008, 13:34 ET)
P38 blueprint
Case hardening  (Started: Jan. 31 2008, 14:39 ET, Last post: Feb. 2 2008, 04:14 ET)
Cutting the frame rails 1911  (Started: Jan. 30 2008, 11:50 ET, Last post: Feb. 2 2008, 00:06 ET)
How and what size
Stevens junior model 11 1904  (Started: Jan. 31 2008, 02:12 ET, Last post: Feb. 1 2008, 23:10 ET)
Need help
Bold trigger with safety  (Started: Feb. 1 2008, 00:28 ET, Last post: Feb. 1 2008, 04:15 ET)
It will fire with the bolt lifted
Bullpup trigger solenoid  (Started: Jan. 30 2008, 21:07 ET, Last post: Jan. 31 2008, 21:41 ET)
Licensed manufacturer premises?  (Started: Jan. 5 2008, 15:05 ET, Last post: Jan. 30 2008, 19:18 ET)
Folding shotgun foregrip  (Started: Jan. 26 2008, 13:42 ET, Last post: Jan. 29 2008, 23:14 ET)
Tapping browning 1886  (Started: Jan. 29 2008, 01:04 ET, Last post: Jan. 29 2008, 13:39 ET)
Unertl target scope block dimensions  (Started: Jan. 27 2008, 18:52 ET, Last post: Jan. 28 2008, 19:38 ET)
Unertl target scope block dimensions
How to view a dxf file?  (Started: Jan. 27 2008, 23:50 ET, Last post: Jan. 28 2008, 16:55 ET)
Reaming chromed shotgun forcing cone?  (Started: Jan. 24 2008, 18:10 ET, Last post: Jan. 27 2008, 21:29 ET)
Turk mauser rebarrel  (Started: Jan. 27 2008, 11:41 ET, Last post: Jan. 27 2008, 18:17 ET)
Ad hoc sput welder  (Started: Jan. 26 2008, 20:23 ET, Last post: Jan. 27 2008, 10:29 ET)
Have a cap and power supply
Gas piston  (Started: Jan. 26 2008, 00:15 ET, Last post: Jan. 26 2008, 22:27 ET)
Home made part
Trigger job on a bersa thunder 380  (Started: Jan. 23 2008, 10:38 ET, Last post: Jan. 25 2008, 17:59 ET)
Any tips on improving the trigger pull
Q: forearm to barrel interaction / accuracy  (Started: Jan. 20 2008, 11:20 ET, Last post: Jan. 25 2008, 13:19 ET)
Trying to build new forearm for ak-type
Wheres the best deals on an 80 gal compressor?  (Started: Jan. 19 2008, 02:27 ET, Last post: Jan. 22 2008, 11:53 ET)
Q: picatinny rail  (Started: Jan. 19 2008, 12:54 ET, Last post: Jan. 21 2008, 14:40 ET)
What do the slots do?
Go and nogo gauges  (Started: Jan. 18 2008, 14:38 ET, Last post: Jan. 21 2008, 13:22 ET)
Ar15 brl work  (Started: Dec. 11 2007, 17:59 ET, Last post: Jan. 19 2008, 12:19 ET)
Opinions
1911 slide question  (Started: Jan. 15 2008, 07:45 ET, Last post: Jan. 18 2008, 00:06 ET)
Sight cut id please
50 bmg cross section  (Started: Jan. 14 2008, 16:54 ET, Last post: Jan. 17 2008, 12:01 ET)
Reverse plug with bushing  (Started: Jan. 13 2008, 11:32 ET, Last post: Jan. 15 2008, 01:12 ET)
Reverse plug with bushing
Remington action  (Started: Jan. 14 2008, 16:42 ET, Last post: Jan. 14 2008, 16:42 ET)
Re chambering a throat eroded barrel.  (Started: Jan. 11 2008, 14:06 ET, Last post: Jan. 13 2008, 19:00 ET)
Spring question  (Started: Jan. 9 2008, 22:31 ET, Last post: Jan. 13 2008, 14:52 ET)
Adding photos to trading post ads  (Started: Jan. 13 2008, 10:12 ET, Last post: Jan. 13 2008, 12:30 ET)
Adding photos to trading post ads
1911 sfs ambidextrous safety  (Started: Jan. 11 2008, 01:33 ET, Last post: Jan. 13 2008, 09:37 ET)
1911 sfs ambidextrous safety
Need to cut a crown & thread w/o a lathe  (Started: Dec. 27 2007, 15:56 ET, Last post: Jan. 13 2008, 00:11 ET)
A whole new jennings.  (Started: Jan. 7 2008, 21:34 ET, Last post: Jan. 12 2008, 14:46 ET)
What do you think would be required....
Pachmayr dominator single shot pistol  (Started: Jan. 11 2008, 01:36 ET, Last post: Jan. 12 2008, 11:00 ET)
Pachmayr dominator single shot pistol
Muzzle brake plans  (Started: Jan. 11 2008, 15:18 ET, Last post: Jan. 11 2008, 16:56 ET)
Extractor to ejector conversion  (Started: Jan. 10 2008, 22:18 ET, Last post: Jan. 11 2008, 13:29 ET)
Double barrel shotguns
Need heat treat  (Started: Jan. 7 2008, 21:35 ET, Last post: Jan. 10 2008, 22:58 ET)
Heat treat
Slam fire shotguns=nfa?  (Started: Jan. 7 2008, 20:39 ET, Last post: Jan. 10 2008, 05:05 ET)
Philipines wwii era
Which steal for bp barrels  (Started: Jan. 7 2008, 07:52 ET, Last post: Jan. 9 2008, 08:18 ET)
22lr chamber reamer  (Started: Jan. 3 2008, 20:11 ET, Last post: Jan. 8 2008, 18:15 ET)
Blue wonder  (Started: Jan. 7 2008, 19:19 ET, Last post: Jan. 8 2008, 06:08 ET)
Making bullet molds  (Started: Jan. 4 2008, 12:53 ET, Last post: Jan. 7 2008, 23:49 ET)
Learning how to make cherries and molds
A non-machinist wanting equipment for tinkering  (Started: Dec. 10 2007, 21:35 ET, Last post: Jan. 7 2008, 21:32 ET)
Savage anschutz 164m .22 mag receiver  (Started: Jan. 7 2008, 18:57 ET, Last post: Jan. 7 2008, 19:34 ET)
Looking for receiver photos or dims.
Firing pin bushing  (Started: Jan. 6 2008, 02:16 ET, Last post: Jan. 7 2008, 18:54 ET)
How much is too much
Barrel bushing  (Started: Jan. 3 2008, 17:06 ET, Last post: Jan. 7 2008, 18:48 ET)
Barrel bushing
Modify the gunmetal big 50 for a magazine?  (Started: Dec. 20 2007, 12:48 ET, Last post: Jan. 7 2008, 16:55 ET)
Barrel liner install  (Started: Dec. 27 2007, 18:29 ET, Last post: Jan. 5 2008, 10:30 ET)
Brain picking  (Started: Jan. 2 2008, 21:16 ET, Last post: Jan. 4 2008, 17:22 ET)
Need ideas
Using spring stock???  (Started: Jan. 1 2008, 18:07 ET, Last post: Jan. 4 2008, 16:49 ET)
Ruger build  (Started: Jan. 3 2008, 16:21 ET, Last post: Jan. 4 2008, 05:09 ET)
Fitting used barrel to model 70  (Started: Jan. 2 2008, 01:37 ET, Last post: Jan. 4 2008, 00:19 ET)
Barrel liner  (Started: Jan. 3 2008, 18:40 ET, Last post: Jan. 3 2008, 20:52 ET)
40x rimfire to centerfire conversion help needed  (Started: Jan. 3 2008, 12:20 ET, Last post: Jan. 3 2008, 12:20 ET)
Custom made brass ????  (Started: Dec. 29 2007, 00:51 ET, Last post: Jan. 1 2008, 16:31 ET)
50 cal muzzle brake and rifle design questions  (Started: Apr. 28 2006, 23:12 ET, Last post: Jan. 1 2008, 09:48 ET)
What the best way?
Enfield  rear sight base  (Started: Dec. 31 2007, 10:12 ET, Last post: Dec. 31 2007, 17:33 ET)
Removal
Steel for firing pin?  (Started: Oct. 26 2007, 10:25 ET, Last post: Dec. 31 2007, 17:32 ET)
Making a firing pin for a shotgun?
Full profile threading  (Started: Dec. 30 2007, 18:23 ET, Last post: Dec. 31 2007, 17:02 ET)
Blast media question  (Started: Dec. 29 2007, 16:32 ET, Last post: Dec. 31 2007, 15:13 ET)
Custom bolt stop/release  (Started: Dec. 30 2007, 22:59 ET, Last post: Dec. 30 2007, 22:59 ET)
A few questions  (Started: Dec. 28 2007, 23:01 ET, Last post: Dec. 28 2007, 23:40 ET)
Life of "plastic" used in firearms  (Started: Dec. 23 2007, 10:54 ET, Last post: Dec. 28 2007, 09:53 ET)
New heremes help/info needed (engraving)  (Started: Dec. 23 2007, 16:55 ET, Last post: Dec. 26 2007, 18:16 ET)
Co-axial front rest  (Started: Dec. 25 2007, 11:36 ET, Last post: Dec. 26 2007, 11:07 ET)
Anyone know how they work??
Magazine for ruger 77/44  (Started: Dec. 23 2007, 06:12 ET, Last post: Dec. 23 2007, 06:15 ET)
Changing magazine well
Steel issue:  (Started: Dec. 16 2007, 22:03 ET, Last post: Dec. 21 2007, 02:07 ET)
Cleaning a colt .25 auto  (Started: Dec. 20 2007, 18:34 ET, Last post: Dec. 20 2007, 22:54 ET)
How does it come apart?
Help with my remington bolt  (Started: Dec. 16 2007, 16:41 ET, Last post: Dec. 20 2007, 21:26 ET)
Loose bolt
Id a stainless rod  (Started: Dec. 19 2007, 16:05 ET, Last post: Dec. 19 2007, 18:49 ET)
Drilling and tapping marlin 39  (Started: Dec. 19 2007, 02:53 ET, Last post: Dec. 19 2007, 03:27 ET)
Colt clone parts  (Started: Dec. 5 2007, 09:37 ET, Last post: Dec. 18 2007, 09:42 ET)
Cut into barrel chamber area  (Started: Nov. 20 2007, 15:44 ET, Last post: Dec. 18 2007, 08:31 ET)
Off topic - help w/daughter's science fair!  (Started: Dec. 16 2007, 13:56 ET, Last post: Dec. 18 2007, 08:29 ET)
Ppk/s feed problem  (Started: Dec. 5 2007, 01:38 ET, Last post: Dec. 17 2007, 23:04 ET)
Deep hole drilling  (Started: Dec. 12 2007, 08:50 ET, Last post: Dec. 17 2007, 11:20 ET)
Heat treating  (Started: Dec. 16 2007, 17:33 ET, Last post: Dec. 16 2007, 22:55 ET)
Lightweight 10/22 bull barrels?  (Started: Dec. 9 2007, 20:36 ET, Last post: Dec. 16 2007, 21:19 ET)
Aluminum or carbon fiber
Llama pistols  (Started: Apr. 29 2007, 21:28 ET, Last post: Dec. 15 2007, 23:54 ET)
Need opinions
Ak-47 barrel thread?  (Started: Dec. 11 2007, 10:27 ET, Last post: Dec. 15 2007, 13:41 ET)
Left hand metric?
Home built 50 bmg bolt rifle. magazine?  (Started: Dec. 11 2007, 20:07 ET, Last post: Dec. 13 2007, 00:36 ET)
Help  with edge finder  (Started: Dec. 9 2007, 22:34 ET, Last post: Dec. 11 2007, 18:24 ET)
Which stainless steel  (Started: Dec. 7 2007, 17:18 ET, Last post: Dec. 11 2007, 14:54 ET)
Taurus .44 special  (Started: Dec. 3 2007, 23:19 ET, Last post: Dec. 11 2007, 09:55 ET)
Ar 15 barrel extension, need help!!!  (Started: Apr. 9 2007, 15:36 ET, Last post: Dec. 10 2007, 18:07 ET)
J.l.galef companion folding shotgun  (Started: Dec. 10 2007, 05:20 ET, Last post: Dec. 10 2007, 17:06 ET)
Sxs firing pin bushing replacement  (Started: Dec. 9 2007, 16:20 ET, Last post: Dec. 9 2007, 20:09 ET)
Questions about replacing a broken part
Need help with bolt/lug strength from gurus  (Started: Dec. 6 2007, 01:18 ET, Last post: Dec. 9 2007, 11:49 ET)
Proplem  (Started: Dec. 6 2007, 19:36 ET, Last post: Dec. 7 2007, 05:05 ET)
S7w 22a  (Started: Dec. 6 2007, 19:51 ET, Last post: Dec. 6 2007, 19:51 ET)
Disassembly & assembly instructions
Ar handguards getting bigger?  (Started: Dec. 1 2007, 14:39 ET, Last post: Dec. 6 2007, 16:03 ET)
Sten mags  (Started: Dec. 1 2007, 11:49 ET, Last post: Dec. 5 2007, 16:34 ET)
Springs
Drilling and tapping super hard "hardened steel"  (Started: Sep. 23 2007, 17:00 ET, Last post: Dec. 4 2007, 22:37 ET)
What type of drill bit to use???
Metal glock frames?  (Started: Dec. 2 2007, 00:29 ET, Last post: Dec. 4 2007, 18:43 ET)
Anyone try them?
Cycling problems, short stroking  (Started: Dec. 4 2007, 11:50 ET, Last post: Dec. 4 2007, 13:38 ET)
Gas black placement
Pitted barrel and reciever to be filled.  need sug  (Started: Nov. 30 2007, 20:45 ET, Last post: Dec. 3 2007, 13:41 ET)
Extractor slot cut  (Started: Dec. 2 2007, 19:40 ET, Last post: Dec. 3 2007, 10:03 ET)
In a f/a flemming conversion bolt
Marlin 60 mag conversion  (Started: Jun. 11 2007, 14:55 ET, Last post: Dec. 2 2007, 23:51 ET)
Useing parts from model 70?
Remington 760  (Started: Dec. 2 2007, 19:06 ET, Last post: Dec. 2 2007, 20:47 ET)
Loss of accuracy
Remington 760  (Started: Dec. 2 2007, 19:05 ET, Last post: Dec. 2 2007, 19:05 ET)
Loss of accuracy
Ithaca 37 won't cycle after firing  (Started: Feb. 23 2007, 21:15 ET, Last post: Dec. 2 2007, 16:50 ET)
Custom 10/22 trigger job  (Started: Nov. 27 2007, 21:48 ET, Last post: Dec. 1 2007, 20:51 ET)
Follow at your own risk
Distance between sear spring an frame  (Started: Nov. 29 2007, 16:56 ET, Last post: Dec. 1 2007, 10:14 ET)
Distance between sear spring an frame
How to install a recoil pad to a hollow stock  (Started: Oct. 24 2007, 19:22 ET, Last post: Nov. 28 2007, 18:13 ET)
Installing tru-glo sights on springfield xd  (Started: Nov. 19 2007, 00:53 ET, Last post: Nov. 27 2007, 23:57 ET)
How to do this without ruining the tubes
Ruger 10-22 trigger  (Started: Nov. 23 2007, 12:40 ET, Last post: Nov. 27 2007, 21:56 ET)
Can i make it better?
Winchester 1906 magazine band  (Started: Nov. 22 2007, 18:21 ET, Last post: Nov. 27 2007, 21:31 ET)
What is the basic design
Building a long range rifle  (Started: Nov. 24 2007, 09:29 ET, Last post: Nov. 25 2007, 00:43 ET)
What's the procedure for rebarreling?
Sako extractors  (Started: Nov. 23 2007, 22:25 ET, Last post: Nov. 25 2007, 00:18 ET)
Sako extractor for the .50 bmg
Ruger mkii  (Started: Nov. 23 2007, 10:30 ET, Last post: Nov. 23 2007, 22:28 ET)
Minor maintance needed
Night sight  (Started: Nov. 22 2007, 18:40 ET, Last post: Nov. 23 2007, 17:34 ET)
Can they hold up to hot blueing
Laser engraving an ar15 lower receiver  (Started: Nov. 12 2007, 01:20 ET, Last post: Nov. 23 2007, 12:57 ET)
What do i need to know?
Spanish mauser fires when saftey released  (Started: Nov. 19 2007, 20:02 ET, Last post: Nov. 23 2007, 12:30 ET)
Browning hp grip screws  (Started: Nov. 22 2007, 21:59 ET, Last post: Nov. 22 2007, 21:59 ET)
What bbl twist for  32h&r rifle?  (Started: Nov. 17 2007, 22:56 ET, Last post: Nov. 22 2007, 21:06 ET)
Fal bipod removal  (Started: Nov. 21 2007, 11:41 ET, Last post: Nov. 21 2007, 18:02 ET)
1911 slide cut  (Started: Nov. 21 2007, 14:28 ET, Last post: Nov. 21 2007, 14:29 ET)
Winchester 670 trigger pull?  (Started: Nov. 19 2007, 20:36 ET, Last post: Nov. 21 2007, 03:18 ET)
Refinish win 94  (Started: Nov. 13 2007, 21:04 ET, Last post: Nov. 21 2007, 03:08 ET)
Looking for dimensions for upper on ar10  (Started: Nov. 21 2007, 00:53 ET, Last post: Nov. 21 2007, 00:53 ET)
Anyone has the video:agi video?  (Started: Nov. 16 2007, 11:45 ET, Last post: Nov. 20 2007, 00:33 ET)
Mini-14 problem, where are the mini lovers?  (Started: Nov. 17 2007, 21:00 ET, Last post: Nov. 19 2007, 14:25 ET)
Chamber specs for 500 s&w rifle  (Started: Nov. 14 2007, 06:51 ET, Last post: Nov. 19 2007, 11:56 ET)
Deciding freebore etc.
Warped stock  (Started: Nov. 17 2007, 07:54 ET, Last post: Nov. 18 2007, 12:58 ET)
Looking for suggestions for repair
Anyone ever convert a mossberg 500 to a 590?  (Started: Nov. 15 2007, 18:33 ET, Last post: Nov. 16 2007, 17:43 ET)
Mauser clips  (Started: Nov. 3 2007, 20:06 ET, Last post: Nov. 12 2007, 19:56 ET)
Barrel land height reduction?  (Started: Nov. 12 2007, 18:30 ET, Last post: Nov. 12 2007, 19:35 ET)
Hi power clone  (Started: Nov. 11 2007, 17:09 ET, Last post: Nov. 11 2007, 21:25 ET)
Can i install a comp or port?
Poly revolvers  (Started: Aug. 27 2007, 02:10 ET, Last post: Nov. 11 2007, 12:05 ET)
Glocks made out of poly , why not wheels
Milling straight and level ?  (Started: Nov. 9 2007, 11:19 ET, Last post: Nov. 11 2007, 01:26 ET)
Lahti l-39  (Started: Nov. 6 2007, 12:22 ET, Last post: Nov. 9 2007, 16:45 ET)
Want to build a .308 mauser  (Started: Oct. 4 2007, 17:42 ET, Last post: Nov. 9 2007, 15:14 ET)
Which action to use?
Geco flare gun  (Started: Nov. 7 2007, 00:53 ET, Last post: Nov. 8 2007, 17:46 ET)
Problem with hi standard r-100  (Started: Nov. 5 2007, 10:49 ET, Last post: Nov. 8 2007, 08:43 ET)
Problem with hi standard r-100 reassembl
Building on the mech tech 1911 ccu  (Started: Nov. 5 2007, 18:24 ET, Last post: Nov. 6 2007, 18:44 ET)
A project on the mech tech 1911 ccu
Marlin camp 45  (Started: Nov. 6 2007, 00:07 ET, Last post: Nov. 6 2007, 00:07 ET)
Does anyone have one
Problems with a winchester 1400 mk ii  (Started: Nov. 3 2007, 01:02 ET, Last post: Nov. 5 2007, 03:57 ET)
Tumbling bullets  (Started: Oct. 27 2007, 23:38 ET, Last post: Nov. 4 2007, 01:56 ET)
7mm rem mag mauser
Rem model seven  (Started: Oct. 28 2007, 22:55 ET, Last post: Nov. 1 2007, 17:44 ET)
Trigger question 700/seven?
44 ruger red hawk  (Started: Oct. 30 2007, 23:51 ET, Last post: Oct. 31 2007, 20:52 ET)
Weak primer hits
Heavy bolt  (Started: Oct. 28 2007, 16:20 ET, Last post: Oct. 31 2007, 12:05 ET)
9mm
Stake on 1911 front sight  (Started: Oct. 24 2007, 20:48 ET, Last post: Oct. 29 2007, 21:18 ET)
Blackhawk barrel thread pitch?  (Started: Oct. 24 2007, 22:41 ET, Last post: Oct. 28 2007, 23:37 ET)
Convventiional or special?
Red dot sights  (Started: Oct. 22 2007, 12:48 ET, Last post: Oct. 28 2007, 15:16 ET)
Are any of them any good?
Safety question.  (Started: Oct. 26 2007, 17:40 ET, Last post: Oct. 28 2007, 12:44 ET)
What do you do/think about rings?
Chamber wall thickness  (Started: Oct. 24 2007, 19:36 ET, Last post: Oct. 27 2007, 23:18 ET)
45-70 barrel
Help me rework a military stock  (Started: Oct. 26 2007, 03:44 ET, Last post: Oct. 27 2007, 12:28 ET)
Making a silk purse out of a sow's ear
Browning .22lr  (Started: Oct. 22 2007, 12:08 ET, Last post: Oct. 25 2007, 22:27 ET)
I need some help on how it feeds
Super tuning the 700 rem.  (Started: Oct. 19 2007, 10:34 ET, Last post: Oct. 24 2007, 17:11 ET)
The beanfield deer rifle
Holly cow look at this  (Started: Oct. 19 2007, 10:32 ET, Last post: Oct. 23 2007, 23:01 ET)
More info on this gun please
Building 9mm ak question  (Started: Oct. 20 2007, 18:32 ET, Last post: Oct. 23 2007, 09:38 ET)
4140 for gunsmithing  (Started: Aug. 13 2007, 12:58 ET, Last post: Oct. 22 2007, 11:58 ET)
Supstitutes?
Forend tip removal  (Started: Oct. 17 2007, 19:49 ET, Last post: Oct. 22 2007, 01:37 ET)
Forend tip removal
Help needed with muzzle crown!!!  (Started: Oct. 15 2007, 22:35 ET, Last post: Oct. 20 2007, 22:43 ET)
Muzzle threading  (Started: Oct. 14 2007, 17:03 ET, Last post: Oct. 19 2007, 16:41 ET)
How to?
Redfield  (Started: Oct. 19 2007, 11:49 ET, Last post: Oct. 19 2007, 11:49 ET)
Frontier rings
Mod 94  (Started: Oct. 12 2007, 17:34 ET, Last post: Oct. 19 2007, 08:56 ET)
Weld
What size endmill bit for 1911 feedramp?  (Started: Oct. 17 2007, 08:46 ET, Last post: Oct. 18 2007, 22:32 ET)
Rivets for sandwhich frames  (Started: Oct. 17 2007, 20:30 ET, Last post: Oct. 17 2007, 20:30 ET)
What type of steel?
Bore size  (Started: Oct. 15 2007, 19:20 ET, Last post: Oct. 17 2007, 12:57 ET)
Barrel
Ruger revo surface hardness question  (Started: Oct. 13 2007, 15:52 ET, Last post: Oct. 17 2007, 11:47 ET)
9mm carbine design question  (Started: Oct. 7 2007, 16:02 ET, Last post: Oct. 16 2007, 23:39 ET)
Reliability testing  (Started: Oct. 11 2007, 18:44 ET, Last post: Oct. 16 2007, 00:08 ET)
How much?
Building rifle scopes  (Started: Oct. 12 2007, 06:22 ET, Last post: Oct. 15 2007, 12:56 ET)
Basic optics questions
Silver sodering  (Started: Feb. 18 2006, 18:20 ET, Last post: Oct. 15 2007, 11:00 ET)
Need some help
Rifle will not chamber a round  (Started: Sep. 28 2007, 17:40 ET, Last post: Oct. 14 2007, 21:54 ET)
Mauser stock  (Started: Oct. 12 2007, 02:55 ET, Last post: Oct. 12 2007, 15:52 ET)
Bent barrel  (Started: Oct. 8 2007, 19:38 ET, Last post: Oct. 10 2007, 10:53 ET)
Bent barrel
Sight installation question  (Started: Oct. 10 2007, 01:22 ET, Last post: Oct. 10 2007, 02:48 ET)
Newbie alert!
Can anything be done to clean up a mossberg trigge  (Started: Oct. 3 2007, 21:44 ET, Last post: Oct. 9 2007, 00:54 ET)
Weird things happen  (Started: Oct. 2 2007, 21:28 ET, Last post: Oct. 8 2007, 12:42 ET)
Thought i would try this here  (Started: Oct. 8 2007, 00:08 ET, Last post: Oct. 8 2007, 12:23 ET)
Moved from fal section
1911 mainspring slots  (Started: Oct. 3 2007, 22:07 ET, Last post: Oct. 6 2007, 20:06 ET)
Titanium and anodizing acid  (Started: Oct. 3 2007, 11:58 ET, Last post: Oct. 3 2007, 19:08 ET)
Broken drill bit removal and other issue
Source for 14x1.0 m lh tap and die?  (Started: Oct. 2 2007, 21:25 ET, Last post: Oct. 3 2007, 16:01 ET)
What's to complete on an 80% 10/22 receiver?  (Started: Sep. 30 2007, 15:07 ET, Last post: Oct. 3 2007, 05:52 ET)
What work is still necessary?
Modern pneumatic airgun  (Started: Oct. 2 2007, 20:38 ET, Last post: Oct. 3 2007, 04:09 ET)
Aftermarket s+w ss barrel?  (Started: Oct. 1 2007, 21:28 ET, Last post: Oct. 2 2007, 08:37 ET)
Looking to hotrod a mod 64
Finding whitney kennedy parts  (Started: Sep. 26 2007, 17:15 ET, Last post: Oct. 1 2007, 10:24 ET)
Finding obsolete gun parts & schematics
1187 super mag rifled barrel  (Started: Sep. 29 2007, 19:52 ET, Last post: Sep. 30 2007, 10:18 ET)
Blueprints of pump shotgun or revolver required!  (Started: Sep. 29 2007, 21:07 ET, Last post: Sep. 30 2007, 01:38 ET)
Savage 223 with extracting proplem  (Started: Sep. 29 2007, 07:58 ET, Last post: Sep. 29 2007, 15:54 ET)
New barrel for s&w mod. 64-3  (Started: Sep. 23 2007, 08:00 ET, Last post: Sep. 29 2007, 08:58 ET)
Which barrel to choose ?
Remington 7600 trigger job  (Started: Aug. 29 2007, 09:08 ET, Last post: Sep. 28 2007, 03:24 ET)
Looking for advice
Making a pump shotgun  (Started: Mar. 14 2006, 17:25 ET, Last post: Sep. 27 2007, 22:11 ET)
What type of steel needed
Remove stamping/engraving  (Started: Sep. 12 2007, 17:24 ET, Last post: Sep. 26 2007, 23:58 ET)
Ladder rear sight- plans?  (Started: Sep. 25 2007, 10:07 ET, Last post: Sep. 26 2007, 20:11 ET)
Windage adjustment?
Cherry stock?  (Started: Sep. 22 2007, 14:04 ET, Last post: Sep. 23 2007, 22:33 ET)
Crack detection methods  (Started: Sep. 22 2007, 09:02 ET, Last post: Sep. 23 2007, 00:47 ET)
Magnaflux or dyes or x rays, or?
How do i brake down a raven p-25  (Started: Sep. 22 2007, 20:26 ET, Last post: Sep. 22 2007, 21:28 ET)
Taps and dies  (Started: Sep. 21 2007, 09:55 ET, Last post: Sep. 22 2007, 19:20 ET)
Where to get one?
Whats a good price for a used ppk?  (Started: Sep. 8 2007, 03:39 ET, Last post: Sep. 22 2007, 05:35 ET)
Mauser 66  (Started: Sep. 20 2007, 18:13 ET, Last post: Sep. 20 2007, 22:04 ET)
Rolling block rifle  (Started: Sep. 17 2007, 12:50 ET, Last post: Sep. 20 2007, 02:34 ET)
Books that have pictures
Cz 75, 99, 100?  (Started: Sep. 19 2007, 14:17 ET, Last post: Sep. 19 2007, 20:23 ET)
1960's high standard military model 106  (Started: Sep. 16 2007, 04:04 ET, Last post: Sep. 19 2007, 03:02 ET)
Model 94,  rusty bore and surface metal  (Started: Sep. 18 2007, 12:00 ET, Last post: Sep. 19 2007, 00:51 ET)
How do the recoil assemblies in bullpups work?  (Started: Sep. 17 2007, 01:56 ET, Last post: Sep. 18 2007, 18:49 ET)
Chicopee cartridge limitations?  (Started: Aug. 26 2007, 12:25 ET, Last post: Sep. 17 2007, 10:11 ET)
How far can you go?
Information books  (Started: Sep. 16 2007, 13:47 ET, Last post: Sep. 16 2007, 13:47 ET)
Bernardelli  (Started: Sep. 15 2007, 00:15 ET, Last post: Sep. 15 2007, 10:22 ET)
Spiral fluting  (Started: Sep. 11 2007, 21:28 ET, Last post: Sep. 14 2007, 19:02 ET)
How is it done
Winchester model 100  (Started: Sep. 13 2007, 20:44 ET, Last post: Sep. 13 2007, 22:15 ET)
Lh safety for rem 742?  (Started: Sep. 11 2007, 20:33 ET, Last post: Sep. 12 2007, 20:29 ET)
Vietnam booby traps  (Started: Jul. 14 2007, 01:29 ET, Last post: Sep. 11 2007, 16:58 ET)
I know that this is the not right place
Barreling a 1903 springfield  (Started: Sep. 4 2007, 11:55 ET, Last post: Sep. 10 2007, 13:01 ET)
Thread size
1903-a3 fed ord  (Started: Sep. 6 2007, 17:58 ET, Last post: Sep. 9 2007, 21:41 ET)
Copy cast in japan
Sks ak mag coversion  (Started: Sep. 6 2007, 20:36 ET, Last post: Sep. 9 2007, 11:40 ET)
Tell me what ya think...  (Started: Aug. 29 2007, 21:58 ET, Last post: Sep. 8 2007, 17:35 ET)
.50 bmg
Shothun reloading newb question- flechettes  (Started: Aug. 16 2007, 06:44 ET, Last post: Sep. 5 2007, 15:56 ET)
Looking for detachable scope mount drawings  (Started: Sep. 5 2007, 10:59 ET, Last post: Sep. 5 2007, 10:59 ET)
Seeking build plans/fab drawings
Shotgun/rifle scopes ???  (Started: Aug. 28 2007, 12:28 ET, Last post: Sep. 4 2007, 21:53 ET)
Relining a beretta 92 barrel to 30 luger  (Started: Aug. 31 2007, 23:29 ET, Last post: Sep. 4 2007, 02:13 ET)
Deagle issues.  (Started: Aug. 30 2007, 20:06 ET, Last post: Sep. 1 2007, 08:19 ET)
50 to 357
50 bmg barrell source?  (Started: Sep. 1 2007, 05:35 ET, Last post: Sep. 1 2007, 06:13 ET)
Browning a-bolt  (Started: Aug. 25 2007, 01:45 ET, Last post: Aug. 31 2007, 17:09 ET)
A homemade gun  (Started: Aug. 29 2007, 21:10 ET, Last post: Aug. 29 2007, 22:56 ET)
12gage pistol
Turkish mauser problem  (Started: Aug. 26 2007, 14:15 ET, Last post: Aug. 29 2007, 20:36 ET)
Scope destroyed by recoil??  (Started: Aug. 19 2007, 12:02 ET, Last post: Aug. 29 2007, 15:05 ET)
Armalight  ar-24  (Started: Aug. 28 2007, 18:49 ET, Last post: Aug. 28 2007, 18:49 ET)
Smle trigger/sear question  (Started: Aug. 12 2007, 02:28 ET, Last post: Aug. 28 2007, 14:32 ET)
Trigger/sear
Mauser cocking piece peep  (Started: Aug. 18 2007, 16:44 ET, Last post: Aug. 26 2007, 13:52 ET)
Pics, prices, availability?
1911 not cocking  (Started: Aug. 17 2007, 02:17 ET, Last post: Aug. 26 2007, 09:06 ET)
New slide release
Win model 120 shotgun woes  (Started: Aug. 23 2007, 13:49 ET, Last post: Aug. 25 2007, 17:08 ET)
Also 18" barrel measured from where?
Cheap 17 caliber barrel ?  (Started: Aug. 19 2007, 01:27 ET, Last post: Aug. 23 2007, 13:44 ET)
An advanced idea ; but perhaps wrong?
Striped out screw removal.  (Started: Aug. 21 2007, 22:01 ET, Last post: Aug. 23 2007, 00:21 ET)
Ideas please.
Bsa rifle  (Started: Aug. 21 2007, 22:41 ET, Last post: Aug. 21 2007, 22:41 ET)
Stock
Mauser  (Started: Aug. 20 2007, 16:11 ET, Last post: Aug. 21 2007, 00:30 ET)
Bolt modifications
Rem 1100 mag tube replace  (Started: Aug. 19 2007, 21:08 ET, Last post: Aug. 20 2007, 02:55 ET)
Smoothing up cylinder spin  (Started: Aug. 18 2007, 16:55 ET, Last post: Aug. 18 2007, 22:51 ET)
Measuring headspace on martini-henri  (Started: Aug. 17 2007, 20:48 ET, Last post: Aug. 18 2007, 18:37 ET)
How is it done?
How was it done?  (Started: Aug. 14 2007, 05:41 ET, Last post: Aug. 18 2007, 16:02 ET)
Breech block machining problem
H&r top break?  (Started: Aug. 12 2007, 16:14 ET, Last post: Aug. 17 2007, 18:30 ET)
1911 scratches  (Started: Aug. 16 2007, 23:04 ET, Last post: Aug. 17 2007, 04:41 ET)
Prevention of scratches
Rusting encore  (Started: Aug. 14 2007, 21:12 ET, Last post: Aug. 16 2007, 22:45 ET)
H †e †l †p ! ! !
Bore vs caliber?  (Started: Aug. 8 2007, 00:32 ET, Last post: Aug. 15 2007, 03:27 ET)
What is the differnce in bore & caliber
Cz-52-9mm!  (Started: Aug. 11 2007, 23:20 ET, Last post: Aug. 12 2007, 20:59 ET)
Set up barrel/rebarrel!
Type of metal  (Started: Aug. 11 2007, 17:48 ET, Last post: Aug. 12 2007, 13:46 ET)
Weld a favorite
Cut-off barrel use question  (Started: Jul. 31 2007, 11:58 ET, Last post: Aug. 12 2007, 04:41 ET)
Sks m worries???  (Started: Aug. 11 2007, 21:06 ET, Last post: Aug. 11 2007, 23:42 ET)
Browning bar disassembly  (Started: Aug. 4 2007, 10:28 ET, Last post: Aug. 11 2007, 09:17 ET)
Taurus tracker...need to disassemble...  (Started: Aug. 9 2007, 17:13 ET, Last post: Aug. 10 2007, 18:30 ET)
.22 cooey bolt action base mounts  (Started: Jul. 27 2007, 20:03 ET, Last post: Aug. 10 2007, 15:31 ET)
Sti vs. usp vs. 1911 grip circumference  (Started: Aug. 8 2007, 21:46 ET, Last post: Aug. 10 2007, 00:21 ET)
Match sight plans  (Started: Jun. 30 2007, 00:11 ET, Last post: Aug. 9 2007, 13:42 ET)
Match sight plans
Home built bolt action  (Started: Aug. 8 2007, 13:14 ET, Last post: Aug. 8 2007, 20:41 ET)
Problems with a .22lr copy of ppk  (Started: Aug. 6 2007, 21:54 ET, Last post: Aug. 8 2007, 19:29 ET)
Slam firing & failure to eject
Mauser strength  (Started: Aug. 7 2007, 09:08 ET, Last post: Aug. 8 2007, 14:15 ET)
Found this some time back can't find it nowg it  (Started: Aug. 7 2007, 18:12 ET, Last post: Aug. 7 2007, 21:24 ET)
Need some help finding and maybe buildin
Grendal p12  (Started: Aug. 1 2007, 23:40 ET, Last post: Aug. 7 2007, 19:42 ET)
Frame from scratch
Ruger 10-22 dimension?  (Started: Aug. 5 2007, 17:12 ET, Last post: Aug. 6 2007, 17:37 ET)
Remington 740 disassembly  (Started: Aug. 6 2007, 17:11 ET, Last post: Aug. 6 2007, 17:11 ET)
Chrome plating a beretta 92?  (Started: Aug. 3 2007, 22:25 ET, Last post: Aug. 5 2007, 16:02 ET)
Good idea?
Loose dovetail  (Started: Aug. 4 2007, 17:23 ET, Last post: Aug. 4 2007, 21:42 ET)
Reciever thread repair  (Started: Aug. 3 2007, 23:53 ET, Last post: Aug. 4 2007, 17:00 ET)
Chime in gurus
Stevens crackshot lever question  (Started: Jul. 25 2007, 16:48 ET, Last post: Aug. 4 2007, 08:43 ET)
Not locking in the closed/up position
Current brownell's discount code?  (Started: Jul. 30 2007, 19:13 ET, Last post: Aug. 1 2007, 22:10 ET)
Ruger no1 barrel threads  (Started: Jul. 28 2007, 16:00 ET, Last post: Jul. 31 2007, 22:15 ET)
Someone has to be able to help me please!!!!!  (Started: Jul. 26 2007, 20:13 ET, Last post: Jul. 31 2007, 17:07 ET)
4140 heat treat  (Started: Jul. 30 2007, 23:23 ET, Last post: Jul. 31 2007, 13:20 ET)
Annealed or heat treated
Winchester 94  (Started: Jul. 30 2007, 09:38 ET, Last post: Jul. 30 2007, 20:06 ET)
Won't open after firing
Ruger 77 yrigger problem  (Started: Jul. 29 2007, 11:16 ET, Last post: Jul. 30 2007, 05:44 ET)
Tang safety question
Ar15  to mini-14 mag converson  (Started: Jul. 20 2007, 14:11 ET, Last post: Jul. 29 2007, 11:04 ET)
What to do ?  (Started: Jul. 15 2007, 00:43 ET, Last post: Jul. 29 2007, 02:22 ET)
Proper twist rate  (Started: Jul. 22 2007, 13:45 ET, Last post: Jul. 29 2007, 02:10 ET)
Glock converted to 7.62x25?  (Started: Jul. 28 2007, 22:38 ET, Last post: Jul. 28 2007, 23:24 ET)
Engraving pantograph  (Started: Jul. 5 2007, 20:28 ET, Last post: Jul. 27 2007, 18:21 ET)
Mic 6 aluminum hardening?  (Started: May 23 2007, 19:00 ET, Last post: Jul. 26 2007, 19:29 ET)
Is there a way to harden the aluminum?
Stevens 62  (Started: Jul. 25 2007, 21:01 ET, Last post: Jul. 26 2007, 11:10 ET)
Bolt locked up
Mauser 98 12 ga  (Started: Jun. 20 2007, 00:33 ET, Last post: Jul. 25 2007, 02:34 ET)
How?
Remove a stuck screw  (Started: Jul. 18 2007, 09:35 ET, Last post: Jul. 24 2007, 11:05 ET)
Cheap cad program  (Started: Jul. 22 2007, 04:48 ET, Last post: Jul. 23 2007, 12:55 ET)
Media blasting  (Started: Jul. 18 2007, 16:37 ET, Last post: Jul. 19 2007, 10:03 ET)
Loking for more info
T/c system 1 muzzleloader  (Started: Jul. 18 2007, 18:37 ET, Last post: Jul. 18 2007, 18:37 ET)
Need receiver/striker dimensions
Sw model 14 elevation screw stuck  (Started: Jul. 18 2007, 11:32 ET, Last post: Jul. 18 2007, 14:20 ET)
Star 32. auto  (Started: Jul. 16 2007, 18:50 ET, Last post: Jul. 17 2007, 15:10 ET)
Possible boom?
More mags to id  (Started: Jul. 16 2007, 11:40 ET, Last post: Jul. 16 2007, 19:08 ET)
338 lapua on a remington 700  long action  (Started: Jul. 15 2007, 20:02 ET, Last post: Jul. 16 2007, 18:37 ET)
Lapping lugs  (Started: Jun. 24 2007, 17:14 ET, Last post: Jul. 16 2007, 03:34 ET)
Change headspace?
Pre 64 winchester 70 action  (Started: Jul. 16 2007, 01:35 ET, Last post: Jul. 16 2007, 01:35 ET)
22 hornet receiver same as .30-06?
Feed problem on marlin lever action  (Started: Jul. 14 2007, 22:19 ET, Last post: Jul. 15 2007, 19:31 ET)
Action extraction  (Started: Jul. 13 2007, 20:49 ET, Last post: Jul. 15 2007, 19:07 ET)
More reliable extraction
Which parts kit for ak-47 build?  (Started: Jul. 14 2007, 13:32 ET, Last post: Jul. 14 2007, 22:51 ET)
I'm considering my first project
Best place to buy barrel blanks?  (Started: Jul. 12 2007, 22:13 ET, Last post: Jul. 14 2007, 16:40 ET)
Measuring with headspace gauge  (Started: Jul. 7 2007, 12:42 ET, Last post: Jul. 9 2007, 22:39 ET)
Possible?
Remington 700  (Started: Jul. 8 2007, 05:55 ET, Last post: Jul. 9 2007, 11:42 ET)
Long to short bolt
Mystery stock  (Started: Jul. 8 2007, 18:03 ET, Last post: Jul. 8 2007, 20:12 ET)
Need help, advice for shotgun.  (Started: Jul. 5 2007, 22:23 ET, Last post: Jul. 7 2007, 17:14 ET)
Single shot - shotgun.
Welding mauser lock screw holes  (Started: Jul. 5 2007, 20:11 ET, Last post: Jul. 6 2007, 17:28 ET)
Tinker, sharpening jig  (Started: Jun. 29 2007, 23:17 ET, Last post: Jul. 5 2007, 21:54 ET)
What should i go for?  (Started: Jul. 3 2007, 16:46 ET, Last post: Jul. 4 2007, 11:50 ET)
Me again
Turk model?  (Started: Jun. 30 2007, 01:03 ET, Last post: Jul. 3 2007, 18:58 ET)
Bolt release extends over charging slot
American gunsmithing dvd's???  (Started: Jul. 2 2007, 10:17 ET, Last post: Jul. 3 2007, 17:52 ET)
Crap or not????
M16/ar15 differences  (Started: Jun. 30 2007, 15:24 ET, Last post: Jul. 3 2007, 15:32 ET)
Are they different?
Mystery part needs a name  (Started: Jul. 2 2007, 18:20 ET, Last post: Jul. 3 2007, 01:25 ET)
Recommendations for a .223  (Started: Dec. 2 2003, 23:54 ET, Last post: Jul. 2 2007, 19:03 ET)
Removing chrome  (Started: Jul. 1 2007, 01:09 ET, Last post: Jul. 2 2007, 10:14 ET)
How to remove chrome from a pistol?
Suitable barrel wall thickness for a 45  (Started: Jul. 1 2007, 06:37 ET, Last post: Jul. 2 2007, 07:32 ET)
45 single shot
Winchester 94 post-'64 lever differences  (Started: Jun. 28 2007, 02:16 ET, Last post: Jul. 1 2007, 04:55 ET)
Calling all win94 experts!
What is the accuracy potential of the ak kits?  (Started: Jun. 28 2007, 14:44 ET, Last post: Jul. 1 2007, 02:42 ET)
Twist rate how it effects accuracy  (Started: Jun. 28 2007, 16:27 ET, Last post: Jul. 1 2007, 02:29 ET)
1 in nine or one in fourteen
Putting a scope mount on a old mini-14  (Started: Jun. 29 2007, 03:23 ET, Last post: Jul. 1 2007, 02:21 ET)
Scope mount for mini 14
Yugo m48 mauser--action to magazine fit.  (Started: Jun. 30 2007, 15:05 ET, Last post: Jul. 1 2007, 02:17 ET)
Xd45 sight replacement  (Started: Jun. 29 2007, 21:57 ET, Last post: Jun. 30 2007, 18:51 ET)
10/22 to .17hm2 alternative ways...  (Started: Jun. 13 2007, 20:24 ET, Last post: Jun. 30 2007, 14:03 ET)
Not using the heavy handle....
7.62 hi-point  (Started: Apr. 19 2007, 22:56 ET, Last post: Jun. 29 2007, 00:49 ET)
Has any one thought of doing this?
9mm headspace  (Started: Jun. 28 2007, 00:18 ET, Last post: Jun. 28 2007, 22:33 ET)
Diminisions needed
I need the hole spread on the 98k mauser?  (Started: Jun. 27 2007, 22:40 ET, Last post: Jun. 28 2007, 17:22 ET)
I have just picked up a new stock
Case hardening  (Started: Mar. 14 2007, 21:27 ET, Last post: Jun. 28 2007, 17:06 ET)
Cz-52 pistol problem  (Started: Jun. 19 2007, 22:33 ET, Last post: Jun. 27 2007, 18:25 ET)
Pins walk out
Gunsmithing schools  (Started: Jun. 25 2007, 08:58 ET, Last post: Jun. 27 2007, 18:14 ET)
Schools and training
Rounding a forearm tip  (Started: Jun. 27 2007, 17:42 ET, Last post: Jun. 27 2007, 17:42 ET)
Did i get a deal???  (Started: Jun. 26 2007, 07:15 ET, Last post: Jun. 26 2007, 09:16 ET)
98 mauser going into a sporter stock----question.  (Started: Jun. 22 2007, 11:15 ET, Last post: Jun. 26 2007, 00:38 ET)
Hk 91 g3 prints  (Started: Jun. 9 2007, 15:22 ET, Last post: Jun. 25 2007, 11:19 ET)
Ruger blackhawk barrel  (Started: Jun. 22 2007, 00:29 ET, Last post: Jun. 22 2007, 14:22 ET)
Barrel change out
If there is no primer and empty case can obtain!  (Started: Jun. 17 2007, 11:08 ET, Last post: Jun. 22 2007, 11:07 ET)
Ammo
Any mauser gurus?  (Started: May 23 2007, 08:52 ET, Last post: Jun. 22 2007, 00:58 ET)
Soldering q's  (Started: Jun. 20 2007, 00:29 ET, Last post: Jun. 21 2007, 00:18 ET)
Old parker shotgun
Parkerizing  (Started: Jun. 19 2007, 20:58 ET, Last post: Jun. 20 2007, 22:33 ET)
Is this possible?  (Started: Jun. 19 2007, 23:00 ET, Last post: Jun. 20 2007, 10:41 ET)
M14 parts kit on m1 receiver
Fortal  (Started: Jun. 15 2007, 01:19 ET, Last post: Jun. 19 2007, 22:24 ET)
Strong enough for black powder action?
Who has an 80% ar10  (Started: Jun. 19 2007, 12:45 ET, Last post: Jun. 19 2007, 20:28 ET)
Trukish mauser  (Started: Jun. 17 2007, 19:15 ET, Last post: Jun. 19 2007, 10:28 ET)
Bolt action shotguns  (Started: Jun. 7 2007, 11:28 ET, Last post: Jun. 18 2007, 21:02 ET)
Need info
Ballester molina trigger  (Started: Jun. 18 2007, 16:16 ET, Last post: Jun. 18 2007, 16:16 ET)
How to remove trigger
Who made this 22 ranger and when?  (Started: Jun. 16 2007, 23:53 ET, Last post: Jun. 17 2007, 14:59 ET)
Any idea?
Other than brownells or du-lite..  (Started: Jun. 16 2007, 03:30 ET, Last post: Jun. 17 2007, 10:04 ET)
Odd color stocks  (Started: Jun. 16 2007, 00:19 ET, Last post: Jun. 16 2007, 12:46 ET)
Fortal / 7075 aluminum  (Started: Jun. 14 2007, 11:39 ET, Last post: Jun. 15 2007, 13:32 ET)
Excellent data
Aluminum cased ammo?  (Started: May 21 2007, 20:18 ET, Last post: Jun. 15 2007, 09:37 ET)
Lengthening a yugo m24/47 magazine  (Started: Jun. 13 2007, 14:35 ET, Last post: Jun. 14 2007, 12:17 ET)
I need help lengthening a magazine
Remington 870 magazine threads  (Started: Jun. 12 2007, 00:48 ET, Last post: Jun. 12 2007, 14:02 ET)
How to port a barrel?  (Started: Jun. 11 2007, 03:39 ET, Last post: Jun. 12 2007, 01:52 ET)
Barrel shroud  (Started: May 25 2007, 13:17 ET, Last post: Jun. 11 2007, 16:25 ET)
A special weapons mp-5 clone question...  (Started: Jun. 10 2007, 03:08 ET, Last post: Jun. 11 2007, 01:34 ET)
Loose scope....again!!  (Started: Jun. 1 2007, 21:42 ET, Last post: Jun. 10 2007, 19:41 ET)
Difference between 80% and 60%  (Started: Jun. 9 2007, 17:56 ET, Last post: Jun. 10 2007, 14:04 ET)
Bsa scope question  (Started: Jun. 8 2007, 13:11 ET, Last post: Jun. 10 2007, 13:34 ET)
Some problems with low-end scopes
Marlin 1894, 357, feeding problems, help  (Started: Jun. 8 2007, 21:37 ET, Last post: Jun. 10 2007, 13:22 ET)
Pistol options  (Started: Jun. 4 2007, 20:54 ET, Last post: Jun. 8 2007, 15:24 ET)
How to remove some nicks in a 45 slide?  (Started: Jun. 8 2007, 05:15 ET, Last post: Jun. 8 2007, 15:18 ET)
Piller bedding question  (Started: Jun. 8 2007, 11:52 ET, Last post: Jun. 8 2007, 15:16 ET)
Rem 700
Fn mauser vs gew 98  (Started: May 31 2007, 21:29 ET, Last post: Jun. 8 2007, 14:37 ET)
Pics please
Kimber 82 govt  (Started: Jun. 5 2007, 21:09 ET, Last post: Jun. 8 2007, 13:28 ET)
Bolts?
Gas port size vs. preassure equation  (Started: Jun. 7 2007, 19:32 ET, Last post: Jun. 8 2007, 03:27 ET)
Single shot 12ga 3.5 from barrel blank  (Started: Jun. 5 2007, 12:54 ET, Last post: Jun. 6 2007, 18:42 ET)
Questions about safety and pressure
.22 mini-magnum incomplete plans!!!!  (Started: Feb. 11 2007, 14:00 ET, Last post: Jun. 6 2007, 00:49 ET)
Anyone fill in the blanks??
S&w k frame moon clips  (Started: Jun. 5 2007, 11:12 ET, Last post: Jun. 5 2007, 22:58 ET)
Question about shooting bullets with blank patrons  (Started: Jun. 4 2007, 08:04 ET, Last post: Jun. 5 2007, 22:23 ET)
Noob question ...  (Started: Jun. 4 2007, 09:29 ET, Last post: Jun. 5 2007, 20:36 ET)
I'm confused
Where to purchase a browning a bolt sear?  (Started: Jun. 5 2007, 09:00 ET, Last post: Jun. 5 2007, 16:27 ET)
Browning nor midwest gun works will sell
Greener style safety  (Started: May 23 2007, 19:14 ET, Last post: Jun. 4 2007, 19:02 ET)
14mm left hand threads  (Started: Jun. 2 2007, 20:59 ET, Last post: Jun. 4 2007, 14:09 ET)
Yes, i'm in ny
Beretta 92 converted to .357sig  (Started: May 29 2007, 16:18 ET, Last post: Jun. 3 2007, 20:11 ET)
Winchester model 94  (Started: Jun. 3 2007, 16:23 ET, Last post: Jun. 3 2007, 16:23 ET)
Trigger spring
Convert a 10 shot s+w to 6?  (Started: May 24 2007, 22:50 ET, Last post: Jun. 2 2007, 01:27 ET)
Is it possible?
Stevens single shot 22  (Started: May 29 2007, 18:26 ET, Last post: May 29 2007, 18:26 ET)
Bolt
Millennium pt 138  (Started: May 21 2007, 00:35 ET, Last post: May 29 2007, 10:09 ET)
The 'bsp' 9mm smg  (Started: May 26 2007, 03:53 ET, Last post: May 28 2007, 23:53 ET)
Does anyone have the blueprints for this
Help with sw pistol  (Started: May 26 2007, 18:49 ET, Last post: May 27 2007, 20:29 ET)
A little help please  (Started: May 27 2007, 03:30 ET, Last post: May 27 2007, 16:26 ET)
Ak47 prints?  (Started: May 15 2007, 16:42 ET, Last post: May 27 2007, 03:46 ET)
Remington 510 triggerjob  (Started: May 20 2007, 16:20 ET, Last post: May 26 2007, 22:27 ET)
Replacing a hammer  (Started: May 26 2007, 18:21 ET, Last post: May 26 2007, 18:21 ET)
Mossberg 100 atr  (Started: May 25 2007, 16:18 ET, Last post: May 25 2007, 21:02 ET)
Bbl nut & bolt head
Moss.500 front sight removal  (Started: May 25 2007, 18:05 ET, Last post: May 25 2007, 18:05 ET)
Removing stock recoil lugs  (Started: May 21 2007, 12:35 ET, Last post: May 25 2007, 01:51 ET)
Promag 40 rd 191 drum  (Started: May 22 2007, 19:41 ET, Last post: May 23 2007, 13:31 ET)
Are these a pos?
Speacial order brass  (Started: May 17 2007, 11:04 ET, Last post: May 19 2007, 22:33 ET)
.25lr
Beretta cx4 storm carbune barrel question  (Started: May 18 2007, 00:08 ET, Last post: May 19 2007, 01:30 ET)
Help with screw identification  (Started: May 16 2007, 20:57 ET, Last post: May 17 2007, 18:43 ET)
Marlin 336
Scrap metal identification?  (Started: May 12 2007, 13:10 ET, Last post: May 13 2007, 22:57 ET)
Scrap metals
Bubba and the smle  (Started: Apr. 28 2007, 23:36 ET, Last post: May 13 2007, 05:37 ET)
Drilling and tapping
Upsized blowback  (Started: May 11 2007, 14:23 ET, Last post: May 12 2007, 21:43 ET)
Variations on a theme
12ga break barrel  (Started: May 7 2007, 03:02 ET, Last post: May 11 2007, 16:09 ET)
Info needed on design
Problem with my hi-power  (Started: May 5 2007, 10:23 ET, Last post: May 10 2007, 12:01 ET)
Ask a guru  (Started: May 2 2007, 09:19 ET, Last post: May 10 2007, 01:31 ET)
Need barrel info
Fitting an ambi safety in a 1911  (Started: May 5 2007, 14:44 ET, Last post: May 7 2007, 15:26 ET)
Help recover from big mistake (i hope) 1911  (Started: May 7 2007, 08:34 ET, Last post: May 7 2007, 15:18 ET)
No-bottom metal stock for a cz550  (Started: May 7 2007, 10:22 ET, Last post: May 7 2007, 10:22 ET)
Need some advice and help....
Sti open gun build questions  (Started: Apr. 26 2007, 23:35 ET, Last post: May 2 2007, 23:57 ET)
Weaver rail on nef 12 ga.  (Started: Apr. 29 2007, 00:48 ET, Last post: May 2 2007, 18:58 ET)
Need help. problem with browning golds.  (Started: Apr. 28 2007, 23:17 ET, Last post: May 2 2007, 15:48 ET)
700 remington case support  (Started: Apr. 20 2007, 15:23 ET, Last post: Apr. 30 2007, 01:04 ET)
Mg 42 links  (Started: Apr. 17 2007, 22:54 ET, Last post: Apr. 27 2007, 19:41 ET)
Rem. 700 sa for 300wsm  (Started: Apr. 27 2007, 18:55 ET, Last post: Apr. 27 2007, 19:34 ET)
Polishing feedramps  (Started: Apr. 26 2007, 18:48 ET, Last post: Apr. 27 2007, 18:30 ET)
How do i do it ?
Bent front sight - p38  (Started: Apr. 26 2007, 17:00 ET, Last post: Apr. 27 2007, 14:41 ET)
Need advice on streightening.
Blank pistol, converted to live ammo?  (Started: Apr. 25 2007, 08:29 ET, Last post: Apr. 27 2007, 11:57 ET)
Is this possible?
Help i need a spring made  (Started: Apr. 23 2007, 21:26 ET, Last post: Apr. 27 2007, 11:56 ET)
Identify pistol frame blank  (Started: Apr. 25 2007, 23:17 ET, Last post: Apr. 26 2007, 00:36 ET)
I need help identifying a pistol frame.
What makes a custom gun worth 2k  (Started: Apr. 22 2007, 20:15 ET, Last post: Apr. 24 2007, 01:22 ET)
Cold rolled steel  (Started: Apr. 11 2007, 00:54 ET, Last post: Apr. 22 2007, 20:36 ET)
Dumb fal question  (Started: Apr. 22 2007, 17:01 ET, Last post: Apr. 22 2007, 17:15 ET)
Turk 38 rebarrel?????  (Started: Apr. 20 2007, 15:24 ET, Last post: Apr. 22 2007, 14:13 ET)
Possible rebarrel to 458wm??
What loads  for 45 lc?  (Started: Apr. 18 2007, 15:46 ET, Last post: Apr. 21 2007, 21:23 ET)
Signal flare  (Started: Apr. 19 2007, 00:13 ET, Last post: Apr. 19 2007, 14:16 ET)
218 bee shell extractor  (Started: Apr. 19 2007, 09:40 ET, Last post: Apr. 19 2007, 10:15 ET)
Question about model 70 action  (Started: Apr. 18 2007, 00:55 ET, Last post: Apr. 19 2007, 00:15 ET)
Model 70 bolt
Antique double barrel needs help  (Started: Apr. 15 2007, 00:11 ET, Last post: Apr. 17 2007, 22:16 ET)
Lc smith hammer gun help needed!
Anyone ever built one of these?  (Started: Apr. 17 2007, 08:16 ET, Last post: Apr. 17 2007, 18:14 ET)
Can this be fixed?  (Started: Apr. 13 2007, 23:13 ET, Last post: Apr. 15 2007, 00:20 ET)
Saiga .308 converted to take hk91 mags  (Started: Apr. 12 2007, 15:49 ET, Last post: Apr. 13 2007, 15:58 ET)
Shotgun choke questions  (Started: Apr. 11 2007, 17:12 ET, Last post: Apr. 13 2007, 12:34 ET)
Mossberg 500 20ga
Ruger blackhawk  (Started: Nov. 13 2006, 22:48 ET, Last post: Apr. 12 2007, 21:06 ET)
Hard to extract cases.
Ar-47 lower receiver  (Started: Apr. 12 2007, 17:54 ET, Last post: Apr. 12 2007, 19:26 ET)
Availability of the ar-47 lower receiver
Hk 91, 93, 94  (Started: Apr. 11 2007, 21:54 ET, Last post: Apr. 12 2007, 19:00 ET)
Bolt carrier/receiver  dimensions
Beavertail proper measurements  (Started: Apr. 8 2007, 05:53 ET, Last post: Apr. 11 2007, 23:07 ET)
Amt 45 replacing the beavertail
Electrochemical rifleing  (Started: Jul. 26 2006, 23:08 ET, Last post: Apr. 11 2007, 04:02 ET)
Smith and wesson ecr
Bolt face gas cut  (Started: Apr. 10 2007, 07:33 ET, Last post: Apr. 10 2007, 18:09 ET)
Machined receiver for a romanian ak 47  (Started: Apr. 9 2007, 10:19 ET, Last post: Apr. 10 2007, 12:53 ET)
Machined receiver for a romanian ak 47
1919a4  (Started: Apr. 7 2007, 13:24 ET, Last post: Apr. 9 2007, 17:49 ET)
Thinking about one
Stevens 311 model question  (Started: Apr. 7 2007, 23:44 ET, Last post: Apr. 9 2007, 01:11 ET)
Shaper question?  (Started: Mar. 29 2007, 17:07 ET, Last post: Apr. 6 2007, 16:50 ET)
Shaper vs mill  (Started: Mar. 29 2007, 00:47 ET, Last post: Apr. 6 2007, 14:53 ET)
M1 carbine remove iron sight  (Started: Apr. 6 2007, 14:38 ET, Last post: Apr. 6 2007, 14:38 ET)
Which way to drive?
Savage /fox sxs fires both barrels  (Started: Apr. 3 2007, 19:46 ET, Last post: Apr. 5 2007, 17:41 ET)
Taurus revolver 17hmr case extraction issue  (Started: Apr. 5 2007, 12:23 ET, Last post: Apr. 5 2007, 12:50 ET)
How do i convert an sks to accept ak mags?  (Started: Apr. 3 2007, 00:05 ET, Last post: Apr. 3 2007, 12:23 ET)
Remington 7600 plastic bits?  (Started: Apr. 1 2007, 09:31 ET, Last post: Apr. 3 2007, 00:44 ET)
Titanium firing pin?  (Started: Apr. 1 2007, 18:56 ET, Last post: Apr. 2 2007, 22:41 ET)
'93 mauser 7.62x39 extractor issue  (Started: Mar. 18 2007, 13:01 ET, Last post: Apr. 1 2007, 20:16 ET)
Extractor claw too short
M1903  (Started: Mar. 30 2007, 10:12 ET, Last post: Apr. 1 2007, 07:54 ET)
Hole over the chamber !
500 s&w auto indexing  (Started: Mar. 29 2007, 18:43 ET, Last post: Mar. 30 2007, 11:27 ET)
Homebrew ar-15 piston kit?  (Started: Mar. 29 2007, 13:33 ET, Last post: Mar. 29 2007, 18:46 ET)
Anybody tried making one?
Will a rcbs hand primer do this?  (Started: Mar. 23 2007, 12:17 ET, Last post: Mar. 29 2007, 15:10 ET)
What drilland tap for colt 1911.....  (Started: Mar. 25 2007, 02:20 ET, Last post: Mar. 28 2007, 15:26 ET)
Silver solder  (Started: Feb. 28 2007, 18:16 ET, Last post: Mar. 27 2007, 18:45 ET)
Tips, tricks, fuzzbean type write ups plz
Mauser bolt problem  (Started: Mar. 25 2007, 23:45 ET, Last post: Mar. 27 2007, 17:55 ET)
A mismatched bolt will not close
Three part grizzly mill/lathe question  (Started: Mar. 20 2007, 00:22 ET, Last post: Mar. 25 2007, 13:33 ET)
Best .50 bmg plans for first build?  (Started: Mar. 19 2007, 06:37 ET, Last post: Mar. 23 2007, 21:59 ET)
Fal reciever thread  (Started: Jan. 19 2007, 08:13 ET, Last post: Mar. 22 2007, 19:37 ET)
Reciever not fully threaded
Cyclic rate of full-auto firearms  (Started: Mar. 20 2007, 23:03 ET, Last post: Mar. 21 2007, 23:06 ET)
What governs/controls cyclic rate?
Homemade mauser  (Started: Mar. 21 2007, 20:13 ET, Last post: Mar. 21 2007, 21:12 ET)
Down loadable manual
Home built gas blocks  (Started: Mar. 21 2007, 20:51 ET, Last post: Mar. 21 2007, 20:56 ET)
Any ideas, designs?
Yugo 56/99 sks  (Started: Mar. 16 2007, 14:11 ET, Last post: Mar. 21 2007, 20:37 ET)
Advice
Advice on a polishing buffer recommendation!  (Started: Mar. 18 2007, 21:00 ET, Last post: Mar. 21 2007, 01:01 ET)
Even more lathe/mill questions!!  (Started: Mar. 20 2007, 22:06 ET, Last post: Mar. 21 2007, 00:26 ET)
Help with a bluing-cart idea.....  (Started: Mar. 18 2007, 22:34 ET, Last post: Mar. 20 2007, 23:42 ET)
Hopkins&allen breaktop  (Started: Mar. 1 2007, 14:56 ET, Last post: Mar. 20 2007, 16:11 ET)
Need help with disassembly and diagnosis
.243 1-12 twist?  (Started: Mar. 19 2007, 14:44 ET, Last post: Mar. 20 2007, 10:40 ET)
Sabots  (Started: Mar. 14 2007, 05:00 ET, Last post: Mar. 20 2007, 03:09 ET)
Homemade sabots ?
Ok, you've sold me! i want to be a member.  (Started: Mar. 19 2007, 17:51 ET, Last post: Mar. 20 2007, 01:53 ET)
S&w 686 barrel  (Started: Mar. 19 2007, 13:03 ET, Last post: Mar. 19 2007, 22:59 ET)
What to do with it
Aluminum actions  (Started: Mar. 18 2007, 21:29 ET, Last post: Mar. 19 2007, 22:18 ET)
4140 lug inserts
Bluing burners? how to build, where to get?  (Started: Mar. 18 2007, 22:39 ET, Last post: Mar. 19 2007, 21:49 ET)
S&w 357 wheel gun cylinder jammed????  (Started: Mar. 6 2007, 14:27 ET, Last post: Mar. 18 2007, 23:56 ET)
Test bolt  (Started: Mar. 18 2007, 21:05 ET, Last post: Mar. 18 2007, 21:05 ET)
Field test bolt
Mirror finish  (Started: Mar. 18 2007, 01:22 ET, Last post: Mar. 18 2007, 19:12 ET)
Norinco sks questions  (Started: Mar. 13 2007, 19:39 ET, Last post: Mar. 18 2007, 16:57 ET)
Help with 1911  (Started: Mar. 9 2007, 01:23 ET, Last post: Mar. 17 2007, 20:01 ET)
Hardening 1144 stressproof  (Started: Mar. 17 2007, 11:50 ET, Last post: Mar. 17 2007, 18:27 ET)
I need some details please
308  ak  (Started: Mar. 16 2007, 00:38 ET, Last post: Mar. 16 2007, 23:08 ET)
Rapid fire guns
Sks front sight question  (Started: Mar. 16 2007, 17:10 ET, Last post: Mar. 16 2007, 19:24 ET)
Dan wesson worn hammer pivot pin  (Started: Mar. 16 2007, 00:26 ET, Last post: Mar. 16 2007, 16:37 ET)
Suggestions for repair?
H&r 500 s&w handi rifle  (Started: Feb. 26 2007, 22:17 ET, Last post: Mar. 16 2007, 08:34 ET)
Unlocking during recoil
Help converting a c96 broomhandle to 9mm  (Started: Mar. 10 2007, 19:13 ET, Last post: Mar. 13 2007, 21:05 ET)
Gew 98 mauser for custom  (Started: Mar. 2 2007, 11:37 ET, Last post: Mar. 13 2007, 20:04 ET)
A couple questions
94 winchester gold spike...house fire  (Started: Mar. 9 2007, 11:17 ET, Last post: Mar. 12 2007, 10:26 ET)
Need advise
7mm mauser  (Started: Mar. 10 2007, 07:43 ET, Last post: Mar. 11 2007, 23:55 ET)
Barrel set back
Falling block dimensions  (Started: Mar. 9 2007, 10:39 ET, Last post: Mar. 11 2007, 23:49 ET)
Drawings for colt saa  (Started: Mar. 10 2007, 19:08 ET, Last post: Mar. 10 2007, 20:02 ET)
Drawings for colt saa
Visited odcmp website today  (Started: Mar. 8 2007, 14:08 ET, Last post: Mar. 10 2007, 19:43 ET)
M1 garand rifle
Derringer side plates and breach face  (Started: Feb. 24 2007, 02:35 ET, Last post: Mar. 10 2007, 18:01 ET)
Parkerizing - porcelain pot ok?  (Started: Mar. 10 2007, 16:23 ET, Last post: Mar. 10 2007, 16:49 ET)
Corrosive ammo  (Started: Mar. 2 2007, 09:49 ET, Last post: Mar. 10 2007, 13:49 ET)
Counter bore  (Started: Mar. 8 2007, 20:21 ET, Last post: Mar. 9 2007, 20:10 ET)
Proper way to do this?
Breach loader  (Started: Mar. 3 2007, 00:23 ET, Last post: Mar. 8 2007, 15:57 ET)
Marking homemade receiver w/ serial #  (Started: Feb. 28 2007, 13:09 ET, Last post: Mar. 8 2007, 13:58 ET)
Ruger grip frame  (Started: Mar. 8 2007, 09:51 ET, Last post: Mar. 8 2007, 09:51 ET)
Rusted bolt  (Started: Mar. 4 2007, 03:57 ET, Last post: Mar. 7 2007, 15:36 ET)
Newbie ?-adapt rom ak47 to 7.62x54?  (Started: Mar. 6 2007, 19:46 ET, Last post: Mar. 7 2007, 15:10 ET)
Is stainless weaker?  (Started: Mar. 3 2007, 11:12 ET, Last post: Mar. 6 2007, 17:34 ET)
Ak trigger ?  (Started: Mar. 6 2007, 10:04 ET, Last post: Mar. 6 2007, 15:09 ET)
Shotgun info  (Started: Mar. 4 2007, 00:02 ET, Last post: Mar. 5 2007, 20:49 ET)
Wards hercules model sd10b
11 mm dovetail cutter  (Started: Mar. 4 2007, 21:27 ET, Last post: Mar. 4 2007, 22:59 ET)
Magazine catch problem  (Started: Mar. 4 2007, 17:07 ET, Last post: Mar. 4 2007, 21:10 ET)
Not long enough..
Mas 49/56 manual  (Started: Mar. 4 2007, 01:11 ET, Last post: Mar. 4 2007, 12:48 ET)
Mini-14 bull barrel  (Started: Feb. 28 2007, 08:23 ET, Last post: Mar. 3 2007, 17:05 ET)
Accurizing help
1860 army cartridge conversion?  (Started: Jan. 26 2007, 22:59 ET, Last post: Mar. 2 2007, 21:00 ET)
Firing pins  (Started: Feb. 26 2007, 23:17 ET, Last post: Mar. 2 2007, 15:14 ET)
Making a firing pin
Shotgun vent rib  (Started: Feb. 26 2007, 20:26 ET, Last post: Mar. 1 2007, 01:21 ET)
Smith 586  (Started: Feb. 17 2007, 04:20 ET, Last post: Feb. 28 2007, 23:58 ET)
Cylinder won't close
2-stage trigger for crosman 2240  (Started: Feb. 28 2007, 04:55 ET, Last post: Feb. 28 2007, 04:55 ET)
Big bore (.308) airgun project ...  (Started: Feb. 14 2007, 08:30 ET, Last post: Feb. 28 2007, 04:48 ET)
Walther clone parts  (Started: Feb. 27 2007, 21:23 ET, Last post: Feb. 27 2007, 21:23 ET)
Soldering vent ribs on shotguns  (Started: Feb. 26 2007, 19:11 ET, Last post: Feb. 27 2007, 08:50 ET)
Rossi 5 shot revolver  (Started: Feb. 27 2007, 07:21 ET, Last post: Feb. 27 2007, 07:21 ET)
Cylinder locking properly ?
Convert win. 1894 lever  (Started: Jul. 27 2006, 18:58 ET, Last post: Feb. 26 2007, 15:52 ET)
Convert from post-'64 to pre-'64
Ruger#1  (Started: Feb. 26 2007, 07:08 ET, Last post: Feb. 26 2007, 07:08 ET)
Barrel removal
Cz 22  (Started: Feb. 20 2007, 01:09 ET, Last post: Feb. 25 2007, 18:21 ET)
Trigger play
Crazy mauser stocks  (Started: Feb. 22 2007, 22:32 ET, Last post: Feb. 25 2007, 06:46 ET)
How to remove stuck ar-15 front sight pins  (Started: Feb. 24 2007, 02:47 ET, Last post: Feb. 24 2007, 11:09 ET)
Replacing bead sight on rem express home defense?  (Started: Feb. 22 2007, 14:25 ET, Last post: Feb. 24 2007, 11:06 ET)
Charter arms bulldog  (Started: Feb. 21 2007, 21:06 ET, Last post: Feb. 23 2007, 10:42 ET)
Reassembly
Chamber reamer chatter  (Started: Feb. 7 2007, 17:32 ET, Last post: Feb. 21 2007, 17:14 ET)
Se title
.30 carbine info request  (Started: Feb. 20 2007, 12:12 ET, Last post: Feb. 21 2007, 00:14 ET)
Push feed for rimmed cartridge  (Started: Feb. 12 2007, 23:19 ET, Last post: Feb. 19 2007, 11:43 ET)
Steel for airgun???  (Started: Feb. 6 2007, 09:59 ET, Last post: Feb. 19 2007, 05:44 ET)
Bolt lug compressive area  (Started: Feb. 17 2007, 01:51 ET, Last post: Feb. 18 2007, 00:01 ET)
Noise supression  (Started: Feb. 9 2007, 23:12 ET, Last post: Feb. 16 2007, 23:01 ET)
Indoor testing
48 yugo  (Started: Feb. 15 2007, 11:15 ET, Last post: Feb. 16 2007, 15:18 ET)
Rebarreling
"new" used leblond lathe  (Started: Jan. 28 2007, 20:26 ET, Last post: Feb. 15 2007, 22:19 ET)
What model is it and ...?
Old ruger vaquero problem  (Started: Dec. 21 2006, 15:14 ET, Last post: Feb. 15 2007, 21:59 ET)
Base pin popping  out
12 ga. barrel  (Started: Feb. 14 2007, 00:12 ET, Last post: Feb. 15 2007, 21:05 ET)
Sheridan air gun bolt jamed  (Started: Feb. 14 2007, 13:03 ET, Last post: Feb. 14 2007, 18:42 ET)
Sheridan air gun
Target trigger kit from midway?  (Started: Feb. 12 2007, 21:39 ET, Last post: Feb. 14 2007, 15:14 ET)
Ruger mark ii
Design question  (Started: Nov. 28 2006, 23:21 ET, Last post: Feb. 13 2007, 17:40 ET)
.44 magnum ak
Best way to find holes when drilling an ak trunion  (Started: Jan. 22 2007, 02:47 ET, Last post: Feb. 13 2007, 09:16 ET)
Tig help  (Started: Feb. 12 2007, 18:45 ET, Last post: Feb. 13 2007, 07:07 ET)
High freq. arc stabilizer-add foot pedal
What magazines do you use?  (Started: Feb. 12 2007, 22:00 ET, Last post: Feb. 12 2007, 23:30 ET)
Contender guru???  (Started: Feb. 9 2007, 08:27 ET, Last post: Feb. 11 2007, 23:01 ET)
Convert my .308 mauser action to box magazine  (Started: Feb. 10 2007, 19:48 ET, Last post: Feb. 11 2007, 08:42 ET)
Which magazine?
What ss action  (Started: Feb. 9 2007, 20:06 ET, Last post: Feb. 10 2007, 15:55 ET)
Scope mounts  (Started: Feb. 9 2007, 03:02 ET, Last post: Feb. 9 2007, 03:02 ET)
Cheytac m-200 civ blueprints?  (Started: Feb. 1 2007, 14:50 ET, Last post: Feb. 8 2007, 23:19 ET)
Cheytac m-200 civ blueprints?
Need in importer  (Started: Feb. 8 2007, 22:38 ET, Last post: Feb. 8 2007, 22:38 ET)
To import gun parts
Greener police 12g  (Started: Feb. 8 2007, 01:08 ET, Last post: Feb. 8 2007, 22:34 ET)
Ream out to 2.75?
Cracked win 97 forearm  (Started: Feb. 3 2007, 08:24 ET, Last post: Feb. 8 2007, 10:51 ET)
Whats a god price on an ar reciever?  (Started: Jan. 29 2007, 03:09 ET, Last post: Feb. 7 2007, 19:41 ET)
Walther p99  (Started: Feb. 5 2007, 15:02 ET, Last post: Feb. 7 2007, 13:20 ET)
Models, plans anyone?
Ak-47 -- full-auto vs. semi-auto  (Started: Feb. 1 2007, 23:20 ET, Last post: Feb. 6 2007, 17:49 ET)
Differences in parts
Safety on a winchester sx3  (Started: Feb. 6 2007, 16:25 ET, Last post: Feb. 6 2007, 16:25 ET)
10/22  (Started: Feb. 6 2007, 00:22 ET, Last post: Feb. 6 2007, 00:22 ET)
New type of lr to mag conversion?
Installing barrel liner?  (Started: Feb. 2 2007, 21:48 ET, Last post: Feb. 5 2007, 20:41 ET)
Beat up crackshot  (Started: Feb. 1 2007, 01:33 ET, Last post: Feb. 4 2007, 23:48 ET)
I want some opinions here
I need a bullet trap  (Started: Jan. 31 2007, 22:54 ET, Last post: Feb. 2 2007, 13:26 ET)
Anyone have any ideas before i start
Robinson bros & co  (Started: Jan. 31 2007, 18:35 ET, Last post: Jan. 31 2007, 22:59 ET)
Colt 1903  (Started: Jan. 27 2007, 15:44 ET, Last post: Jan. 31 2007, 22:56 ET)
Need help in reassembly
Help with ruger  red label  (Started: Jan. 30 2007, 23:28 ET, Last post: Jan. 31 2007, 22:56 ET)
870 express ?  (Started: Jan. 29 2007, 18:28 ET, Last post: Jan. 31 2007, 22:24 ET)
Ejector spring is bent
How can i remove 2 stuck pins  (Started: Jan. 29 2007, 20:49 ET, Last post: Jan. 30 2007, 18:21 ET)
Help
Mp5/hk94 bolt question  (Started: Jan. 29 2007, 20:38 ET, Last post: Jan. 30 2007, 13:26 ET)
Need od of upper guide rod
Ruger blackhawk sa revolver pricing  (Started: Jan. 27 2007, 02:59 ET, Last post: Jan. 30 2007, 12:34 ET)
High pressure cyliders for cannons ?  (Started: Jan. 18 2007, 22:19 ET, Last post: Jan. 29 2007, 23:52 ET)
.22 rifle magazines home made ?  (Started: Jan. 5 2006, 02:23 ET, Last post: Jan. 29 2007, 09:54 ET)
Want to build my own .22 magazines
How to post photos on this forum  (Started: Jan. 24 2007, 21:36 ET, Last post: Jan. 28 2007, 22:58 ET)
How to post photos on this forum
Muzzleloader internal ballistics  (Started: Jan. 20 2007, 18:08 ET, Last post: Jan. 28 2007, 02:35 ET)
How to calculate pressure levels
12l14  (Started: Jan. 27 2007, 00:50 ET, Last post: Jan. 28 2007, 00:25 ET)
Buying a lathe  (Started: Jan. 17 2007, 21:45 ET, Last post: Jan. 24 2007, 23:58 ET)
Is it a good buy?
Galled barrel to receiver  (Started: Jan. 21 2007, 19:56 ET, Last post: Jan. 24 2007, 17:13 ET)
Battel machined from flat stock  (Started: Jan. 23 2007, 05:50 ET, Last post: Jan. 24 2007, 08:29 ET)
Anybody know anything about...
.204 saami headspace gauge lengths  (Started: Jan. 21 2007, 22:53 ET, Last post: Jan. 23 2007, 13:09 ET)
Headspace
Exstractor for old fn .22  (Started: Jan. 20 2007, 17:09 ET, Last post: Jan. 22 2007, 20:54 ET)
Need info on missing extractor
Rear site re-installation on a savage 99c  (Started: Jan. 18 2007, 23:59 ET, Last post: Jan. 21 2007, 18:03 ET)
Trying not to do damage to the weapon
Beretta 92 drop in auto sear  (Started: Jan. 21 2007, 01:08 ET, Last post: Jan. 21 2007, 15:11 ET)
Nef ejector  (Started: Jan. 20 2007, 11:14 ET, Last post: Jan. 20 2007, 11:14 ET)
American elm  (Started: Jan. 9 2007, 01:52 ET, Last post: Jan. 20 2007, 11:06 ET)
Is this wood to soft
12 gauge blowback shotgun?  (Started: Aug. 20 2005, 13:13 ET, Last post: Jan. 20 2007, 10:27 ET)
Straight-blowback shotgun- how well do they work?  (Started: Feb. 20 2006, 08:52 ET, Last post: Jan. 20 2007, 08:23 ET)
Homemade headspace guage for 9mm helwan pleasehelp  (Started: Jan. 11 2007, 22:23 ET, Last post: Jan. 20 2007, 06:03 ET)
Rifle design question  (Started: Jan. 19 2007, 17:45 ET, Last post: Jan. 19 2007, 23:23 ET)
A little brain storming please.
500 s&w harrington & richardson handi-rifle  (Started: Jan. 19 2007, 16:03 ET, Last post: Jan. 19 2007, 16:03 ET)
Barrel twist rate
Bent rims from s&w extractor  (Started: Jan. 19 2007, 14:00 ET, Last post: Jan. 19 2007, 14:00 ET)
Rifling for lead bullets  (Started: Jan. 18 2007, 15:56 ET, Last post: Jan. 18 2007, 22:56 ET)
Glenfield model 60 misfires  (Started: Oct. 30 2006, 03:20 ET, Last post: Jan. 17 2007, 03:07 ET)
Ruger 96 .44 stock?  (Started: Jan. 16 2007, 23:28 ET, Last post: Jan. 16 2007, 23:28 ET)
Winchester 94  (Started: Jan. 13 2007, 22:36 ET, Last post: Jan. 16 2007, 19:47 ET)
Need parts and info
Marlin 336 gunsmith info needed  (Started: Jan. 7 2007, 17:04 ET, Last post: Jan. 16 2007, 11:07 ET)
Headspace issues
Thread diameter and pitch?  (Started: Jan. 13 2007, 08:27 ET, Last post: Jan. 15 2007, 22:14 ET)
Mauser bolt  (Started: Jan. 14 2007, 23:54 ET, Last post: Jan. 15 2007, 19:56 ET)
24-47
Manny  (Started: Jan. 15 2007, 15:21 ET, Last post: Jan. 15 2007, 15:21 ET)
Barrel of a remington model 7
Picked up a t/c contender frame today  (Started: Jan. 14 2007, 00:31 ET, Last post: Jan. 15 2007, 15:10 ET)
But it's slightly damaged w/no parts
American gunsmith association (aga)  (Started: Jan. 11 2007, 23:18 ET, Last post: Jan. 12 2007, 23:44 ET)
Not affiliated with gene kelly and agi
Create pdf  (Started: Dec. 27 2006, 17:24 ET, Last post: Jan. 12 2007, 04:14 ET)
Boy could i use some help  (Started: Jan. 7 2007, 12:18 ET, Last post: Jan. 12 2007, 03:56 ET)
Information on rifle building
Powder coat on knives  (Started: Jan. 11 2007, 16:55 ET, Last post: Jan. 12 2007, 01:26 ET)
How to get rid of it best
12-groove rifling  (Started: Jan. 10 2007, 15:03 ET, Last post: Jan. 11 2007, 15:18 ET)
Gun cleaning/ exterior  (Started: Jan. 8 2007, 21:44 ET, Last post: Jan. 11 2007, 01:22 ET)
How to clean the outside?
Winchester 670  (Started: Jan. 8 2007, 23:48 ET, Last post: Jan. 10 2007, 05:14 ET)
Vintage pellet gun repair?  (Started: Jan. 7 2007, 09:30 ET, Last post: Jan. 9 2007, 20:32 ET)
Benjamin pistol
Threading a barrel for a receiver  (Started: Jan. 3 2007, 23:31 ET, Last post: Jan. 9 2007, 16:45 ET)
How long..what tpi..don't wanna die...
Wingmaster ejection problem  (Started: Jan. 7 2007, 23:09 ET, Last post: Jan. 8 2007, 18:54 ET)
Chambering  (Started: Jan. 8 2007, 11:19 ET, Last post: Jan. 8 2007, 15:33 ET)
6.8spc
Scope glass  (Started: Jan. 8 2007, 12:13 ET, Last post: Jan. 8 2007, 12:13 ET)
Mini 14 speed trigger  (Started: Jan. 6 2007, 21:15 ET, Last post: Jan. 8 2007, 09:18 ET)
Is it legal?
Frame out of spec?  (Started: Jan. 7 2007, 21:02 ET, Last post: Jan. 8 2007, 07:03 ET)
Disconnector in the magwell?  (Started: Jan. 1 2007, 18:39 ET, Last post: Jan. 6 2007, 21:38 ET)
Taurus pt111 millenium firing pin disassembly  (Started: Jan. 6 2007, 20:14 ET, Last post: Jan. 6 2007, 20:14 ET)
Taurus pt111 millenium firing pin
Books on firearm design theory & manufacture  (Started: Jan. 5 2007, 20:54 ET, Last post: Jan. 6 2007, 19:25 ET)
Availability of books on design/mfg.
A little advice for my high power  (Started: Dec. 15 2006, 18:22 ET, Last post: Jan. 6 2007, 06:47 ET)
Extractor help
Mini-14 180 series  (Started: Jan. 5 2007, 20:37 ET, Last post: Jan. 6 2007, 00:06 ET)
Where is the number?
Coach gun supreme chokes  (Started: Dec. 28 2006, 15:12 ET, Last post: Jan. 5 2007, 20:57 ET)
Cannon primer  (Started: Jan. 4 2007, 02:28 ET, Last post: Jan. 5 2007, 20:38 ET)
Hd military  (Started: Jan. 3 2007, 10:07 ET, Last post: Jan. 5 2007, 19:00 ET)
Resurection
Marlin 336 stock medalion  (Started: Jan. 5 2007, 13:32 ET, Last post: Jan. 5 2007, 17:51 ET)
Decorative medalion removal
Polishing a chamber  (Started: Dec. 28 2006, 20:32 ET, Last post: Jan. 3 2007, 15:03 ET)
Bolt handle welding  (Started: Nov. 24 2006, 13:33 ET, Last post: Dec. 31 2006, 15:41 ET)
Welding
Ruger red label  (Started: Dec. 29 2006, 17:10 ET, Last post: Dec. 29 2006, 20:26 ET)
Stock search
Magazine for a mossberg 385kb bolt action shotgun  (Started: Dec. 27 2006, 17:00 ET, Last post: Dec. 28 2006, 21:50 ET)
Who knows about older double barrel shotguns?  (Started: Dec. 17 2006, 20:34 ET, Last post: Dec. 28 2006, 16:58 ET)
1930's h&p damascus barrel
Editing a posting  (Started: Dec. 28 2006, 13:43 ET, Last post: Dec. 28 2006, 13:59 ET)
How to edit?
Ruger m77 bolt  (Started: Dec. 24 2006, 19:52 ET, Last post: Dec. 27 2006, 20:24 ET)
Pondering new build  (Started: Dec. 25 2006, 19:03 ET, Last post: Dec. 27 2006, 00:54 ET)
Win 94ae  (Started: Dec. 26 2006, 14:06 ET, Last post: Dec. 26 2006, 21:48 ET)
8mm remington mag on savage action  (Started: Dec. 25 2006, 18:03 ET, Last post: Dec. 26 2006, 16:41 ET)
Question on overall length
7.62x54 to 7.62x39 m-n bbls.  (Started: Dec. 13 2006, 09:13 ET, Last post: Dec. 25 2006, 20:16 ET)
How to sleeve a chamber
Swedish mauser questions  (Started: Dec. 21 2006, 00:42 ET, Last post: Dec. 24 2006, 09:11 ET)
What calibers could i make one in?
Trigger job on model 1917  (Started: Dec. 23 2006, 11:39 ET, Last post: Dec. 23 2006, 11:39 ET)
Air gun chamber?  (Started: Dec. 22 2006, 22:04 ET, Last post: Dec. 23 2006, 10:39 ET)
A couple questions  (Started: Dec. 18 2006, 21:57 ET, Last post: Dec. 23 2006, 09:28 ET)
Home built 50 bmg
How to polish the bolt?  (Started: Dec. 18 2006, 06:24 ET, Last post: Dec. 23 2006, 00:30 ET)
Having difficulty to remove rust
Identifying rifle? help please =)  (Started: Dec. 19 2006, 04:52 ET, Last post: Dec. 22 2006, 18:32 ET)
Put a name to an unknown rifle
Sharps repo conversion  (Started: Dec. 22 2006, 16:40 ET, Last post: Dec. 22 2006, 16:40 ET)
Remingto 700 .243  (Started: Nov. 3 2006, 21:16 ET, Last post: Dec. 22 2006, 15:45 ET)
Barrel break-in
Mossberg 42m(b)  (Started: Dec. 20 2006, 23:55 ET, Last post: Dec. 22 2006, 13:34 ET)
Fitting hi pwr barrel to chas. daly hp  (Started: Dec. 15 2006, 09:40 ET, Last post: Dec. 20 2006, 17:12 ET)
Need help
Installing a bushing  (Started: Dec. 19 2006, 23:55 ET, Last post: Dec. 20 2006, 11:08 ET)
Silver solder, jb weld, gurrilla glue?!
Hot water bluing  (Started: Dec. 16 2006, 18:02 ET, Last post: Dec. 19 2006, 13:39 ET)
Bluing solution recipe
Hammer spring in h&r topper 48  (Started: Dec. 19 2006, 05:36 ET, Last post: Dec. 19 2006, 08:04 ET)
Headspacing  (Started: Dec. 17 2006, 10:56 ET, Last post: Dec. 19 2006, 01:04 ET)
Rebarreling a savage 110
1893 mauser  (Started: Dec. 16 2006, 20:09 ET, Last post: Dec. 18 2006, 22:07 ET)
Mossberg 835  (Started: Dec. 17 2006, 21:47 ET, Last post: Dec. 17 2006, 21:47 ET)
Ext rifled choke tubes
1911 vs 1928?  (Started: Nov. 25 2006, 09:24 ET, Last post: Dec. 17 2006, 20:36 ET)
Ar-15 buffer tube alignment  (Started: Dec. 17 2006, 00:12 ET, Last post: Dec. 17 2006, 00:19 ET)
How off can it be?
Removing rear sight on ruger mark 1  (Started: Dec. 14 2006, 23:02 ET, Last post: Dec. 16 2006, 09:31 ET)
Can't get it to come off
M16  (Started: Dec. 4 2006, 19:37 ET, Last post: Dec. 15 2006, 16:19 ET)
Need help with safety on a remington 700  (Started: Dec. 14 2006, 16:23 ET, Last post: Dec. 15 2006, 16:08 ET)
Got a thought running around in my head  (Started: Nov. 4 2006, 01:04 ET, Last post: Dec. 13 2006, 10:53 ET)
Remington 742 woodsmaster locking up.  (Started: Nov. 18 2006, 14:04 ET, Last post: Dec. 12 2006, 21:14 ET)
Need help
Winchester 94 help  (Started: Nov. 29 2006, 21:18 ET, Last post: Dec. 12 2006, 21:06 ET)
Steel types for making firearms?  (Started: Nov. 27 2006, 14:31 ET, Last post: Dec. 12 2006, 14:25 ET)
Timing 1851 navy colt reproduction revolver  (Started: Apr. 20 2006, 22:39 ET, Last post: Dec. 11 2006, 21:33 ET)
D+t hard receiver  (Started: Dec. 9 2006, 16:05 ET, Last post: Dec. 10 2006, 17:32 ET)
Cylinder information  (Started: Dec. 10 2006, 06:15 ET, Last post: Dec. 10 2006, 06:15 ET)
Glock dry fire, reseting trigger  (Started: Dec. 7 2006, 10:15 ET, Last post: Dec. 9 2006, 17:36 ET)
How would you make one?
P-14 enfield  (Started: Dec. 7 2006, 06:10 ET, Last post: Dec. 8 2006, 21:58 ET)
Eddystone/winchester
7.62x39 case specs?  (Started: Dec. 7 2006, 14:09 ET, Last post: Dec. 8 2006, 07:08 ET)
Browning blr take down  (Started: Dec. 1 2006, 20:54 ET, Last post: Dec. 7 2006, 22:41 ET)
Won't go back togather
742 exstracor replacement  (Started: Nov. 29 2006, 22:28 ET, Last post: Dec. 7 2006, 14:54 ET)
Colt pony in 9mm  (Started: Nov. 29 2006, 15:20 ET, Last post: Dec. 7 2006, 14:48 ET)
Excam gt-22/fie e22 extractor needed  (Started: Dec. 5 2006, 13:58 ET, Last post: Dec. 6 2006, 22:58 ET)
Any leads welcome
Where to get ak parts  (Started: Dec. 5 2006, 07:43 ET, Last post: Dec. 6 2006, 18:57 ET)
Missing a few
Silicone gunsocks?  (Started: Dec. 5 2006, 08:52 ET, Last post: Dec. 5 2006, 08:52 ET)
P-17 triggerguard screw threads...?  (Started: Dec. 4 2006, 10:53 ET, Last post: Dec. 4 2006, 15:40 ET)
Ak pistol  (Started: Nov. 19 2006, 20:55 ET, Last post: Dec. 2 2006, 06:04 ET)
Couple of questions
.22 lr reamer  (Started: Nov. 30 2006, 14:56 ET, Last post: Dec. 1 2006, 13:06 ET)
Which type of reamer?
Remington 700 question  (Started: Nov. 30 2006, 17:47 ET, Last post: Nov. 30 2006, 23:50 ET)
Bdl vs adl
Webley mkii .455  (Started: Nov. 27 2006, 15:52 ET, Last post: Nov. 29 2006, 22:07 ET)
Smithing question
Tc encore  (Started: Nov. 29 2006, 02:25 ET, Last post: Nov. 29 2006, 21:02 ET)
I have a problem (newbie)  (Started: Nov. 28 2006, 20:33 ET, Last post: Nov. 29 2006, 20:13 ET)
Where to start?and
Ruger 77/17  (Started: Nov. 29 2006, 14:29 ET, Last post: Nov. 29 2006, 14:29 ET)
Convert to .17 centerfire
Rifles barrel fitment to an 1887 or 1901 la 12 #  (Started: Nov. 29 2006, 02:08 ET, Last post: Nov. 29 2006, 02:08 ET)
On the chinese copy of
Remington 870  (Started: Nov. 25 2006, 10:16 ET, Last post: Nov. 29 2006, 00:07 ET)
Remington 870 set up for still target
40% 1911 measurement needed  (Started: Nov. 28 2006, 11:24 ET, Last post: Nov. 28 2006, 11:24 ET)
Merkel  (Started: Nov. 26 2006, 21:51 ET, Last post: Nov. 27 2006, 11:18 ET)
Bad barrel
Aftermarket benelli nova barrel  (Started: Nov. 24 2006, 23:44 ET, Last post: Nov. 26 2006, 21:56 ET)
Stevens model 83  (Started: Nov. 26 2006, 16:04 ET, Last post: Nov. 26 2006, 18:25 ET)
Bolt disassembly
Jug choking  (Started: Nov. 25 2006, 14:06 ET, Last post: Nov. 26 2006, 11:25 ET)
Ar trigger problems  (Started: Nov. 25 2006, 18:52 ET, Last post: Nov. 26 2006, 10:20 ET)
Trigger fires in both directions
1903 springfield sighting issue  (Started: Nov. 25 2006, 21:00 ET, Last post: Nov. 25 2006, 21:00 ET)
Anyone know wavelengths of .22lr noise emissions?  (Started: Nov. 20 2006, 15:46 ET, Last post: Nov. 25 2006, 16:29 ET)
I would prefer a graph with sound levels
Mod. 70 barrel threads  (Started: Nov. 22 2006, 22:07 ET, Last post: Nov. 23 2006, 15:11 ET)
Ak or variant recoil spring dimensions?  (Started: Nov. 19 2006, 07:43 ET, Last post: Nov. 22 2006, 00:48 ET)
Sheet metal 10/22  (Started: Oct. 30 2006, 05:44 ET, Last post: Nov. 21 2006, 23:32 ET)
Possible?
Para ord 13 + 1 frame  (Started: Nov. 20 2006, 22:15 ET, Last post: Nov. 21 2006, 18:39 ET)
Ruger .38-.357 cylinder  (Started: Nov. 21 2006, 15:48 ET, Last post: Nov. 21 2006, 18:23 ET)
Pope's gun drilling lathe  (Started: Nov. 20 2006, 00:27 ET, Last post: Nov. 20 2006, 14:45 ET)
I recently got a book for free.
How do i become a gunsmith?  (Started: Oct. 31 2006, 23:05 ET, Last post: Nov. 19 2006, 22:18 ET)
None
The seymour products co  (Started: Nov. 19 2006, 13:22 ET, Last post: Nov. 19 2006, 13:22 ET)
What is it and what did thy make
Shotgun wont eject last round  (Started: Nov. 11 2006, 15:35 ET, Last post: Nov. 18 2006, 20:40 ET)
Revolver blowby  (Started: Nov. 15 2006, 15:23 ET, Last post: Nov. 18 2006, 01:11 ET)
Engraving  (Started: Nov. 17 2006, 21:27 ET, Last post: Nov. 17 2006, 22:00 ET)
Front sight  (Started: Nov. 16 2006, 22:25 ET, Last post: Nov. 16 2006, 22:55 ET)
How to repair
Looking for any pistol prints  (Started: Nov. 15 2006, 15:03 ET, Last post: Nov. 15 2006, 16:47 ET)
Laminated stock set for winchester 94  (Started: Nov. 4 2006, 17:06 ET, Last post: Nov. 15 2006, 12:49 ET)
Where is the best place to get one?
Question on changing threads  (Started: Nov. 10 2006, 14:04 ET, Last post: Nov. 15 2006, 00:52 ET)
Threaded muzzle  (Started: Nov. 12 2006, 21:29 ET, Last post: Nov. 14 2006, 12:54 ET)
Anyone know what this might be?  (Started: Nov. 13 2006, 22:19 ET, Last post: Nov. 14 2006, 10:04 ET)
Loose part in box w/ swede project
Deer gun  (Started: Nov. 8 2006, 03:27 ET, Last post: Nov. 13 2006, 11:33 ET)
Hows this thing work?
Cannon barrel  (Started: Nov. 12 2006, 22:43 ET, Last post: Nov. 13 2006, 01:08 ET)
Caliber choices rechambering 7.08  (Started: Nov. 12 2006, 20:19 ET, Last post: Nov. 12 2006, 22:02 ET)
Hard chrome replacement  (Started: Nov. 10 2006, 10:40 ET, Last post: Nov. 12 2006, 14:00 ET)
Tougher than nails
Moison nagant sniper  (Started: Nov. 11 2006, 15:00 ET, Last post: Nov. 11 2006, 18:23 ET)
Stevens mod. 44 barrel thread size  (Started: Nov. 10 2006, 10:34 ET, Last post: Nov. 10 2006, 22:09 ET)
Which end if barrel is the chamgor end  (Started: Nov. 6 2006, 16:17 ET, Last post: Nov. 10 2006, 00:34 ET)
Bedding scope rings  (Started: Nov. 9 2006, 20:12 ET, Last post: Nov. 10 2006, 00:13 ET)
Win 94 bbl shank tap  (Started: Nov. 8 2006, 19:41 ET, Last post: Nov. 9 2006, 08:15 ET)
Oups!
Bluing tank burners  (Started: Nov. 8 2006, 18:57 ET, Last post: Nov. 8 2006, 22:40 ET)
How big how many
P-14 rebarrel  (Started: Nov. 1 2006, 15:56 ET, Last post: Nov. 8 2006, 16:03 ET)
Traditionl schooling vs correspondence schooling  (Started: Nov. 7 2006, 07:53 ET, Last post: Nov. 8 2006, 15:50 ET)
Amt parts  (Started: Nov. 8 2006, 15:41 ET, Last post: Nov. 8 2006, 15:41 ET)
Amt parts?
Breech face thickness  (Started: Nov. 6 2006, 11:07 ET, Last post: Nov. 7 2006, 00:02 ET)
Marlin model 25  (Started: Nov. 5 2006, 21:08 ET, Last post: Nov. 6 2006, 15:38 ET)
Can i or should i?
Wat is "trueing the lugs"  (Started: Nov. 5 2006, 13:48 ET, Last post: Nov. 6 2006, 13:02 ET)
Who can explain it to me...?
The rib  (Started: Nov. 3 2006, 22:06 ET, Last post: Nov. 5 2006, 22:59 ET)
Stevens problems  (Started: Nov. 4 2006, 22:30 ET, Last post: Nov. 5 2006, 16:36 ET)
Push release every time
Loose stevens / savage 311  (Started: Oct. 27 2006, 19:31 ET, Last post: Nov. 5 2006, 09:53 ET)
.308 in .303  (Started: Nov. 4 2006, 11:18 ET, Last post: Nov. 5 2006, 00:57 ET)
Chambering question
Aluminum mkii  (Started: Aug. 23 2006, 07:31 ET, Last post: Nov. 4 2006, 21:18 ET)
Problem with feed ramp?
Feg pa-63 help  (Started: Nov. 3 2006, 21:22 ET, Last post: Nov. 4 2006, 21:09 ET)
Hungarian walther ppk clone
Picatinny rail  (Started: Oct. 31 2006, 02:20 ET, Last post: Nov. 3 2006, 19:56 ET)
Boresighter laser or optic  (Started: Nov. 1 2006, 01:26 ET, Last post: Nov. 3 2006, 11:30 ET)
Which one?
Security six cylinder removal  (Started: Nov. 2 2006, 20:15 ET, Last post: Nov. 2 2006, 20:15 ET)
Card shooting / turkey shoot shotguns?  (Started: Nov. 1 2006, 07:56 ET, Last post: Nov. 1 2006, 08:09 ET)
Silver solder question  (Started: Oct. 30 2006, 14:08 ET, Last post: Nov. 1 2006, 07:01 ET)
Remington deringer  (Started: Aug. 1 2006, 04:12 ET, Last post: Oct. 31 2006, 22:41 ET)
M12 winchester  (Started: Oct. 30 2006, 19:55 ET, Last post: Oct. 31 2006, 14:48 ET)
Rechambering 7mm rem mag to 7mm ultra mag  (Started: Oct. 30 2006, 22:33 ET, Last post: Oct. 31 2006, 00:32 ET)
Color case hardening  (Started: Sep. 21 2006, 22:52 ET, Last post: Oct. 30 2006, 17:25 ET)
Making a steel ar-15 lower  (Started: Oct. 29 2006, 22:58 ET, Last post: Oct. 30 2006, 12:02 ET)
What type of steel to use
K.kale mauser in 25=06  (Started: Oct. 30 2006, 01:29 ET, Last post: Oct. 30 2006, 01:48 ET)
Trigger job?  (Started: Oct. 28 2006, 16:09 ET, Last post: Oct. 30 2006, 00:38 ET)
Cva choke tube  (Started: Oct. 27 2006, 23:41 ET, Last post: Oct. 29 2006, 18:05 ET)
Mystery solved
Setting a new ar-15  trigger  (Started: Oct. 29 2006, 08:14 ET, Last post: Oct. 29 2006, 12:37 ET)
Double barrel  (Started: Oct. 28 2006, 16:40 ET, Last post: Oct. 28 2006, 21:48 ET)
742 troubles  (Started: Oct. 24 2006, 13:47 ET, Last post: Oct. 28 2006, 21:33 ET)
Jaco design  (Started: Oct. 27 2006, 23:59 ET, Last post: Oct. 28 2006, 18:28 ET)
Barrel porting  (Started: Oct. 26 2006, 20:51 ET, Last post: Oct. 28 2006, 03:06 ET)
Everyone does it right?
A good place to start  (Started: Oct. 26 2006, 21:11 ET, Last post: Oct. 28 2006, 00:41 ET)
Help keep my desire in check
Cutting frame for wilson/nowlin ramped barrel  (Started: Oct. 19 2006, 13:48 ET, Last post: Oct. 25 2006, 22:04 ET)
Fire as in burnt guns  (Started: Oct. 17 2006, 18:42 ET, Last post: Oct. 25 2006, 17:43 ET)
Toasty
Need some help please  (Started: Oct. 20 2006, 21:54 ET, Last post: Oct. 25 2006, 02:24 ET)
Can anyone tell me what this is for
Old reamers?  (Started: Oct. 16 2006, 16:10 ET, Last post: Oct. 24 2006, 16:34 ET)
Just showing how new i am
H.z.w. mod.21 martini  (Started: Oct. 22 2006, 08:19 ET, Last post: Oct. 24 2006, 06:52 ET)
Choke tube  (Started: Oct. 13 2006, 11:16 ET, Last post: Oct. 23 2006, 21:20 ET)
Need specs
Fitting hammer in ruger gp100  (Started: Oct. 23 2006, 16:53 ET, Last post: Oct. 23 2006, 16:53 ET)
Taurus model 63 barrel  (Started: Oct. 22 2006, 22:22 ET, Last post: Oct. 22 2006, 22:22 ET)
Barrel attachment
Skorpion blueprints/parts?  (Started: Oct. 20 2006, 04:15 ET, Last post: Oct. 21 2006, 21:26 ET)
Bill holmes handgunhas any one built one?  (Started: Sep. 26 2006, 11:53 ET, Last post: Oct. 20 2006, 20:52 ET)
Has anyone built one???
Mp5k tactical briefcase blueprints  (Started: Oct. 8 2006, 10:03 ET, Last post: Oct. 20 2006, 16:32 ET)
Rebarreling m1 garand  (Started: Jun. 13 2006, 09:26 ET, Last post: Oct. 20 2006, 15:15 ET)
Joining aluminum to steel  (Started: Oct. 17 2006, 21:48 ET, Last post: Oct. 18 2006, 23:26 ET)
Blackpowder barrel, safe??  (Started: Oct. 16 2006, 06:24 ET, Last post: Oct. 18 2006, 21:16 ET)
Savage 311  (Started: Oct. 18 2006, 10:45 ET, Last post: Oct. 18 2006, 20:14 ET)
Firing pin sleeves
M1a trigger adjustment  (Started: Oct. 18 2006, 19:45 ET, Last post: Oct. 18 2006, 19:45 ET)
Taurus 85 fp spring help  (Started: Oct. 8 2006, 00:13 ET, Last post: Oct. 17 2006, 22:22 ET)
Ruger 1022 bolts  (Started: Oct. 10 2006, 00:23 ET, Last post: Oct. 17 2006, 14:29 ET)
How hard are they
1911 parts hardness  (Started: Oct. 15 2006, 02:12 ET, Last post: Oct. 16 2006, 14:56 ET)
Mag catch parts
Welrod sleeve gun  (Started: Sep. 22 2006, 12:56 ET, Last post: Oct. 16 2006, 10:55 ET)
Nice! but how does the trigger work...?
Larger caliber for the single shot break open  (Started: Oct. 14 2006, 00:43 ET, Last post: Oct. 15 2006, 23:13 ET)
A safer design?
Sweaty holster!  (Started: Oct. 13 2006, 23:00 ET, Last post: Oct. 14 2006, 21:44 ET)
Whats the best finish?
Cracked slide!  (Started: Oct. 13 2006, 00:09 ET, Last post: Oct. 13 2006, 22:42 ET)
Want to repair?
M4 survival rifle  (Started: Oct. 11 2006, 17:11 ET, Last post: Oct. 13 2006, 21:07 ET)
Trigger job on a mossberg 800 rifle?  (Started: Oct. 12 2006, 15:30 ET, Last post: Oct. 12 2006, 16:59 ET)
Help  (Started: Oct. 11 2006, 16:32 ET, Last post: Oct. 12 2006, 08:16 ET)
Remington 1100 buttstock...  (Started: Oct. 9 2006, 19:12 ET, Last post: Oct. 11 2006, 14:10 ET)
Glock 22 conversion upper  (Started: Oct. 5 2006, 20:54 ET, Last post: Oct. 11 2006, 09:38 ET)
Anyone build one?
Modified factory mags. (glock)  (Started: Oct. 10 2006, 07:24 ET, Last post: Oct. 10 2006, 07:24 ET)
Making a 10+ magazine from factory mags?
Jr scope mount  (Started: Oct. 1 2006, 22:14 ET, Last post: Oct. 9 2006, 21:16 ET)
Screw dimensions
S&w british  (Started: Oct. 9 2006, 16:32 ET, Last post: Oct. 9 2006, 16:32 ET)
S&w british
Kock on opening conversion  (Started: Oct. 8 2006, 17:19 ET, Last post: Oct. 8 2006, 19:51 ET)
Wildcat  (Started: Oct. 6 2006, 21:15 ET, Last post: Oct. 8 2006, 11:58 ET)
Case forming questions
Newbie interested in milling 0%1911 slides  (Started: Oct. 7 2006, 15:09 ET, Last post: Oct. 8 2006, 07:56 ET)
Overly complicated?
Wheel locks and match locks  (Started: Oct. 2 2006, 15:04 ET, Last post: Oct. 8 2006, 01:03 ET)
"ways around"
Opening chamber?  (Started: Oct. 7 2006, 09:30 ET, Last post: Oct. 7 2006, 13:03 ET)
Installing a bead front sight  (Started: Oct. 6 2006, 01:32 ET, Last post: Oct. 6 2006, 18:42 ET)
Webley mkiv 45 problem  (Started: Oct. 6 2006, 13:30 ET, Last post: Oct. 6 2006, 18:02 ET)
Extractor retraction
Original ar-10  (Started: Oct. 5 2006, 15:27 ET, Last post: Oct. 5 2006, 15:27 ET)
Same uppers?
Removing broken drills from titanium....ooops  :-p  (Started: Sep. 29 2006, 15:37 ET, Last post: Oct. 4 2006, 22:25 ET)
What do you all think?
Rebuild of m1 carbine to 9x19  (Started: Sep. 30 2006, 13:15 ET, Last post: Oct. 4 2006, 15:10 ET)
Questions on barrel liner in flare gun  (Started: Oct. 3 2006, 22:58 ET, Last post: Oct. 3 2006, 22:58 ET)
Taurus tracker  (Started: Oct. 1 2006, 00:15 ET, Last post: Oct. 3 2006, 14:31 ET)
1886 winchester  (Started: Sep. 30 2006, 22:53 ET, Last post: Oct. 2 2006, 03:00 ET)
Cartridge guide
Springfield double assembly?  (Started: Oct. 1 2006, 08:59 ET, Last post: Oct. 1 2006, 12:21 ET)
How too
Age of a gun  (Started: Sep. 29 2006, 15:54 ET, Last post: Sep. 29 2006, 15:54 ET)
Mossberg series codes
1911's and longer barrels.  (Started: Sep. 25 2006, 22:08 ET, Last post: Sep. 29 2006, 15:16 ET)
I need information =)
Thats some hard metal...  (Started: Sep. 24 2006, 02:10 ET, Last post: Sep. 29 2006, 13:48 ET)
Which steel?  (Started: Sep. 8 2006, 13:39 ET, Last post: Sep. 26 2006, 23:00 ET)
M1 carbine stock replacement  (Started: Sep. 12 2006, 16:24 ET, Last post: Sep. 26 2006, 14:07 ET)
I want a less pretty stock.
Am having a problems with project 1911  (Started: Sep. 23 2006, 14:42 ET, Last post: Sep. 26 2006, 01:16 ET)
Drill bit size for .22  (Started: Sep. 17 2006, 02:10 ET, Last post: Sep. 25 2006, 18:21 ET)
.22 smoothbore
Unidentified receiver  (Started: Sep. 24 2006, 18:52 ET, Last post: Sep. 25 2006, 17:36 ET)
Need help, please
Rem rifles  (Started: Sep. 25 2006, 00:15 ET, Last post: Sep. 25 2006, 09:05 ET)
Barrel blank questions  (Started: Sep. 24 2006, 15:43 ET, Last post: Sep. 25 2006, 01:34 ET)
Question about rechambering  (Started: Sep. 17 2006, 21:35 ET, Last post: Sep. 24 2006, 23:37 ET)
Atn rifle scopes  (Started: Feb. 17 2006, 10:14 ET, Last post: Sep. 24 2006, 09:00 ET)
Are they any good.
Legal to build artillery replica firearm?  (Started: Sep. 22 2006, 20:39 ET, Last post: Sep. 23 2006, 19:58 ET)
S&w nickel finishes  (Started: Sep. 22 2006, 10:25 ET, Last post: Sep. 23 2006, 00:53 ET)
How to clean/polish
Essex 1911 frame  (Started: Sep. 20 2006, 18:59 ET, Last post: Sep. 23 2006, 00:16 ET)
Machining a shotgun barrel for a choke  (Started: Sep. 1 2006, 17:28 ET, Last post: Sep. 22 2006, 16:13 ET)
Extractor claws  (Started: Sep. 21 2006, 09:21 ET, Last post: Sep. 22 2006, 10:57 ET)
How are they attached?
Swede re barrel  (Started: Sep. 22 2006, 00:32 ET, Last post: Sep. 22 2006, 00:42 ET)
Auto ordnance 45 ejection  (Started: Sep. 11 2006, 11:51 ET, Last post: Sep. 21 2006, 18:01 ET)
Ejection problem
Dividing head question.  (Started: Sep. 17 2006, 17:37 ET, Last post: Sep. 21 2006, 00:04 ET)
What next?  (Started: Sep. 19 2006, 06:38 ET, Last post: Sep. 19 2006, 21:09 ET)
Mossberg 500  (Started: Sep. 18 2006, 14:22 ET, Last post: Sep. 19 2006, 00:09 ET)
Safety broke
Mossberg 100 atr  (Started: Sep. 16 2006, 16:37 ET, Last post: Sep. 18 2006, 06:31 ET)
Trigger guard
Cz550 action and 416 rigby  (Started: Sep. 18 2006, 00:16 ET, Last post: Sep. 18 2006, 06:30 ET)
Are these any good.
Help with custom buffalo rifle  (Started: Sep. 17 2006, 02:39 ET, Last post: Sep. 18 2006, 00:37 ET)
Buy new or build..375h&h or other
Resizing buckshot  (Started: Sep. 5 2006, 01:12 ET, Last post: Sep. 17 2006, 22:34 ET)
How to make buckshot smaller
Bent slide  (Started: Sep. 12 2006, 19:41 ET, Last post: Sep. 17 2006, 15:30 ET)
How to fix
S&w model 10 vs victory  (Started: Sep. 16 2006, 01:40 ET, Last post: Sep. 17 2006, 12:29 ET)
Suppressor questions- design/legality  (Started: Aug. 29 2006, 21:51 ET, Last post: Sep. 16 2006, 08:24 ET)
Interchangable baffles
Arbour removal  (Started: Sep. 14 2006, 05:29 ET, Last post: Sep. 15 2006, 19:40 ET)
Whoops! added ventillation to my ak chamber...  (Started: Sep. 7 2006, 11:15 ET, Last post: Sep. 15 2006, 11:09 ET)
Need a box of 12ga blanks  (Started: Sep. 13 2006, 09:23 ET, Last post: Sep. 14 2006, 05:50 ET)
Bolt action rifle building  (Started: Sep. 12 2006, 19:21 ET, Last post: Sep. 12 2006, 23:32 ET)
How to install a rain into a 2nd gen glock?  (Started: Sep. 10 2006, 12:10 ET, Last post: Sep. 12 2006, 15:04 ET)
Best type of end mill  (Started: Sep. 7 2006, 09:52 ET, Last post: Sep. 12 2006, 06:47 ET)
2 flute or 4 flute
Scope mount base  (Started: Sep. 10 2006, 12:59 ET, Last post: Sep. 10 2006, 23:46 ET)
Is it supposed to be that way?
Springfield 67e  (Started: Sep. 10 2006, 08:31 ET, Last post: Sep. 10 2006, 21:30 ET)
Shell lifter
To un-sporterize or  not un-sporterize?  (Started: Sep. 6 2006, 15:21 ET, Last post: Sep. 10 2006, 17:53 ET)
Moral dillemma over a krag
Ruger mk3 22/45  (Started: Sep. 9 2006, 00:53 ET, Last post: Sep. 9 2006, 01:14 ET)
Feed question
A mig to a tig?  (Started: Sep. 2 2006, 14:39 ET, Last post: Sep. 6 2006, 23:42 ET)
Is this possible?
Another mouser question  (Started: Aug. 27 2006, 02:36 ET, Last post: Sep. 6 2006, 16:43 ET)
Lathe vs barrel dia.  (Started: Sep. 5 2006, 13:07 ET, Last post: Sep. 5 2006, 23:12 ET)
Scope mount for ishapore enfield 2a in 308  (Started: Aug. 12 2006, 17:01 ET, Last post: Sep. 5 2006, 22:05 ET)
Mkii frame  (Started: Aug. 31 2006, 09:58 ET, Last post: Sep. 5 2006, 15:41 ET)
Measurements
Title 2 form 1  (Started: Aug. 28 2006, 12:29 ET, Last post: Sep. 3 2006, 23:23 ET)
What should i put for "reason?"
Ak front sight post & silver solder question... he  (Started: Sep. 3 2006, 13:10 ET, Last post: Sep. 3 2006, 23:08 ET)
Question regarding suitability of solder
Lathe mill drill for a newbie  (Started: Sep. 2 2006, 02:19 ET, Last post: Sep. 3 2006, 01:40 ET)
Brand etc
Mac 11/9- barrel pin  (Started: Aug. 30 2006, 03:57 ET, Last post: Sep. 1 2006, 17:13 ET)
Where does it go?
Springfield xd barrels  (Started: Aug. 30 2006, 20:16 ET, Last post: Aug. 30 2006, 20:16 ET)
S&w 629 issue resolved. please comment.  (Started: Aug. 12 2006, 00:26 ET, Last post: Aug. 29 2006, 15:22 ET)
Cutting stock m 12  (Started: Aug. 29 2006, 09:36 ET, Last post: Aug. 29 2006, 13:29 ET)
Another crazy mkii idea?  (Started: Aug. 28 2006, 05:40 ET, Last post: Aug. 28 2006, 05:40 ET)
10/22 barrel adaptation
Has anyone a parts list for this????  (Started: Aug. 17 2006, 09:35 ET, Last post: Aug. 27 2006, 22:11 ET)
1917 smith won't shoot  (Started: Aug. 12 2006, 23:57 ET, Last post: Aug. 27 2006, 22:04 ET)
Some mauser questions  (Started: Aug. 26 2006, 17:38 ET, Last post: Aug. 27 2006, 01:55 ET)
I could really assume help ?  (Started: Aug. 26 2006, 21:14 ET, Last post: Aug. 26 2006, 21:54 ET)
22 cal riffle
Help with my smle  (Started: Aug. 14 2006, 18:25 ET, Last post: Aug. 25 2006, 18:24 ET)
Questionsaboutashort,magazine,leeenfield
Hi iam new here and...  (Started: Aug. 21 2006, 08:04 ET, Last post: Aug. 25 2006, 16:30 ET)
Calling all machinist gurus!...  (Started: Aug. 25 2006, 14:55 ET, Last post: Aug. 25 2006, 14:55 ET)
Looking for a slight challenge?
03-a3 jammed  (Started: Aug. 4 2006, 20:02 ET, Last post: Aug. 24 2006, 21:05 ET)
Pinned barrel  (Started: Aug. 23 2006, 22:38 ET, Last post: Aug. 24 2006, 10:10 ET)
.22 pistol
Birchwood casey gun scrubber?  (Started: Aug. 19 2006, 20:20 ET, Last post: Aug. 23 2006, 22:45 ET)
Rem 700 22.250  (Started: Aug. 23 2006, 21:02 ET, Last post: Aug. 23 2006, 22:03 ET)
.243 rem. 788  (Started: Aug. 19 2006, 00:00 ET, Last post: Aug. 23 2006, 16:22 ET)
Overly tight headspace
Smith 36 out of time  (Started: Aug. 22 2006, 18:55 ET, Last post: Aug. 23 2006, 15:28 ET)
How to fix at home
22 cal winchester mod. 150, replace fire pin  (Started: Aug. 23 2006, 09:05 ET, Last post: Aug. 23 2006, 09:05 ET)
Replace fire pin
Downsizer wsp  (Started: Aug. 20 2006, 00:32 ET, Last post: Aug. 22 2006, 15:25 ET)
Drawings?
Revolver idea  (Started: Aug. 21 2006, 19:30 ET, Last post: Aug. 22 2006, 10:39 ET)
Hexagon hand indexing cylinder?
Karl gustav m45 smg parts kits  (Started: Aug. 19 2006, 01:25 ET, Last post: Aug. 19 2006, 23:21 ET)
Any info on building these?
M11/9 safety selector  (Started: Aug. 18 2006, 16:24 ET, Last post: Aug. 19 2006, 04:40 ET)
Is it supposed to be bent?
Epoxy bedding  (Started: Aug. 16 2006, 17:29 ET, Last post: Aug. 19 2006, 02:11 ET)
Epoxy bedding
Remington 700 in 7mm wsm  (Started: Aug. 18 2006, 00:48 ET, Last post: Aug. 19 2006, 00:32 ET)
Fizz but no bang  (Started: Aug. 13 2006, 20:52 ET, Last post: Aug. 18 2006, 20:43 ET)
Bullet stuck at end of chamber
Rem. 742 headspace  (Started: Jul. 12 2006, 11:43 ET, Last post: Aug. 17 2006, 22:42 ET)
Any good way to modify?
Kt's 6x40 screws  (Started: Aug. 16 2006, 16:24 ET, Last post: Aug. 16 2006, 23:41 ET)
.22 barrel shanks dia.?  (Started: Aug. 15 2006, 02:40 ET, Last post: Aug. 16 2006, 17:32 ET)
Selective fire  (Started: Aug. 15 2006, 22:57 ET, Last post: Aug. 16 2006, 13:47 ET)
How do the mechanics work?
M11 / 9 bolt assembly question...  (Started: Aug. 4 2006, 22:22 ET, Last post: Aug. 16 2006, 00:22 ET)
Does this look ok to any of you..
Eaa witness parts?  (Started: Aug. 14 2006, 04:57 ET, Last post: Aug. 15 2006, 16:04 ET)
50 bmg builds  (Started: Aug. 14 2006, 09:59 ET, Last post: Aug. 15 2006, 13:50 ET)
M98 bullpup design  (Started: Aug. 2 2006, 02:57 ET, Last post: Aug. 12 2006, 16:29 ET)
Looking for plans for an m98 bullpup
S&w 629 classic problem. help please.  (Started: Aug. 11 2006, 10:50 ET, Last post: Aug. 11 2006, 22:47 ET)
Bore alignment
Stuck thumb safety on 1911!  (Started: Aug. 9 2006, 12:23 ET, Last post: Aug. 11 2006, 16:24 ET)
As above
Officer model help  (Started: Jul. 29 2006, 17:32 ET, Last post: Aug. 10 2006, 16:01 ET)
Re-barreling a browning bar  (Started: Aug. 7 2006, 10:42 ET, Last post: Aug. 10 2006, 14:53 ET)
Frank de haas chicopee rf  (Started: Aug. 8 2006, 01:21 ET, Last post: Aug. 9 2006, 23:27 ET)
Questions on testing guns...  (Started: Aug. 8 2006, 15:18 ET, Last post: Aug. 9 2006, 09:19 ET)
Live ammo?  no shooting in back yard
Tritium vials  (Started: Aug. 4 2006, 15:11 ET, Last post: Aug. 8 2006, 01:05 ET)
Looking for tritium vials
Beadblast plastic?  (Started: Aug. 7 2006, 02:06 ET, Last post: Aug. 7 2006, 15:04 ET)
Re barreling a rem 700  (Started: Aug. 7 2006, 10:28 ET, Last post: Aug. 7 2006, 12:59 ET)
Enfield from .303 to .45-70  (Started: Aug. 3 2006, 00:32 ET, Last post: Aug. 7 2006, 00:24 ET)
I know i should just buy a gibbs
More silver solder questions  (Started: Aug. 6 2006, 00:46 ET, Last post: Aug. 6 2006, 22:55 ET)
Recommend a good one
Mac-10 blueprint ??  (Started: Aug. 2 2006, 18:46 ET, Last post: Aug. 6 2006, 12:59 ET)
Flat spring  (Started: Jul. 31 2006, 13:30 ET, Last post: Aug. 5 2006, 16:44 ET)
How do they do that?
Shotgun sights  (Started: Aug. 5 2006, 11:25 ET, Last post: Aug. 5 2006, 11:25 ET)
Replacement sight for mossberg
Hk91/g3  (Started: Aug. 4 2006, 17:26 ET, Last post: Aug. 4 2006, 20:36 ET)
Front sight
Blacxk powder blanks  (Started: Aug. 1 2006, 22:41 ET, Last post: Aug. 4 2006, 17:03 ET)
How am i gona makem
Detachable mag for mauser & remington 700  (Started: Jul. 28 2006, 22:49 ET, Last post: Aug. 3 2006, 23:37 ET)
Muzzleloader question  (Started: Aug. 1 2006, 21:12 ET, Last post: Aug. 2 2006, 14:51 ET)
Winchester 9422  (Started: Aug. 1 2006, 09:45 ET, Last post: Aug. 1 2006, 13:08 ET)
Trigger job
Yugo night sights (ak-47)  (Started: Jul. 19 2006, 15:12 ET, Last post: Aug. 1 2006, 13:00 ET)
Remington 788  (Started: Jul. 28 2006, 11:27 ET, Last post: Jul. 31 2006, 19:43 ET)
Removing torn off cartridge neck?  (Started: Jul. 29 2006, 22:36 ET, Last post: Jul. 31 2006, 18:11 ET)
45 cal single shot?  (Started: Jul. 30 2006, 17:57 ET, Last post: Jul. 30 2006, 21:07 ET)
Suomi drum mag conversion for s&w 76?  (Started: Jul. 26 2006, 23:20 ET, Last post: Jul. 30 2006, 14:30 ET)
Silver soldering (brazing) questions  (Started: Jul. 28 2006, 15:34 ET, Last post: Jul. 30 2006, 00:56 ET)
What parts of the gun are hardened
Pt-140  (Started: Jul. 29 2006, 22:00 ET, Last post: Jul. 29 2006, 22:00 ET)
Repair
Erma ep22 wont cock  (Started: Jul. 16 2006, 23:46 ET, Last post: Jul. 29 2006, 18:11 ET)
Falish ak?  (Started: May 15 2006, 14:34 ET, Last post: Jul. 29 2006, 04:16 ET)
Competion shooting  (Started: Jul. 27 2006, 16:31 ET, Last post: Jul. 28 2006, 21:51 ET)
Metal casting  (Started: Jul. 25 2006, 07:09 ET, Last post: Jul. 28 2006, 10:09 ET)
Mac 10  (Started: Jul. 26 2006, 22:34 ET, Last post: Jul. 28 2006, 07:33 ET)
Where to start  (Started: Jul. 25 2006, 23:40 ET, Last post: Jul. 27 2006, 09:19 ET)
Beginner project
Mauser torque shoulder lap  (Started: Jul. 26 2006, 23:37 ET, Last post: Jul. 27 2006, 02:28 ET)
Ruger six front sight replacement  (Started: Jul. 22 2006, 00:40 ET, Last post: Jul. 26 2006, 23:28 ET)
Help about w2000  (Started: Jul. 26 2006, 07:16 ET, Last post: Jul. 26 2006, 13:08 ET)
Jaco pistol.  (Started: Jul. 25 2006, 18:23 ET, Last post: Jul. 26 2006, 13:08 ET)
Rebarreling a remington 721  (Started: Jul. 22 2006, 07:52 ET, Last post: Jul. 25 2006, 23:22 ET)
Win model 94 receiver finish  (Started: Jul. 23 2006, 01:23 ET, Last post: Jul. 25 2006, 23:15 ET)
Can i park?
Ishapore .308 enfield help!  (Started: Jul. 20 2006, 15:22 ET, Last post: Jul. 25 2006, 17:20 ET)
I need advice on the extractor claw
Charter arms 2000 revolver  (Started: Jul. 24 2006, 14:07 ET, Last post: Jul. 25 2006, 13:08 ET)
Disassembly
Conversion cylinders for 1851 navy  (Started: Jul. 16 2006, 15:19 ET, Last post: Jul. 24 2006, 22:02 ET)
What wood for homemade ak stock?  (Started: Feb. 1 2006, 21:54 ET, Last post: Jul. 22 2006, 08:35 ET)
Is maple too heavy?
Black powder trigger  help.  (Started: Jul. 20 2006, 19:56 ET, Last post: Jul. 21 2006, 01:07 ET)
:help1:
Surplus barrel gauged  (Started: Jul. 19 2006, 19:11 ET, Last post: Jul. 20 2006, 09:47 ET)
Steel and how to find it...  (Started: Jul. 18 2006, 04:40 ET, Last post: Jul. 20 2006, 02:10 ET)
Next home smithing projects  (Started: Jan. 4 2006, 21:04 ET, Last post: Jul. 18 2006, 06:49 ET)
Almost done with my ak, now what?
Question about 30-30 chambering  (Started: Jul. 4 2006, 12:15 ET, Last post: Jul. 17 2006, 11:02 ET)
Brass shows lands and grooves on tip
Ruger super blackhawk  (Started: Jul. 15 2006, 21:38 ET, Last post: Jul. 16 2006, 23:38 ET)
Where can i find front sights?
Tool distributer  (Started: Jul. 15 2006, 18:33 ET, Last post: Jul. 16 2006, 02:01 ET)
What are some of the better places to pu
Design considerations  (Started: Jul. 15 2006, 18:55 ET, Last post: Jul. 15 2006, 19:10 ET)
Is there a web site...  (Started: Jul. 14 2006, 22:04 ET, Last post: Jul. 15 2006, 16:06 ET)
Thread specs for sks screw-in barrel  (Started: Jul. 10 2006, 17:49 ET, Last post: Jul. 14 2006, 21:45 ET)
Sight design mathematics  (Started: Jul. 13 2006, 00:16 ET, Last post: Jul. 14 2006, 21:11 ET)
Where can i learn this stuff?
.44 magnum revolver cylinder  (Started: Jul. 13 2006, 21:57 ET, Last post: Jul. 14 2006, 02:08 ET)
Sae number of steel
Orion recoil pad  (Started: Jul. 13 2006, 09:17 ET, Last post: Jul. 14 2006, 01:05 ET)
Need install help
Threading anschutz 54 receiver  (Started: Jul. 11 2006, 19:05 ET, Last post: Jul. 12 2006, 20:30 ET)
Colt saa halfcock q  (Started: Jul. 12 2006, 13:36 ET, Last post: Jul. 12 2006, 17:20 ET)
Savage model 10 bolt jammed after fired?  (Started: Jul. 12 2006, 15:25 ET, Last post: Jul. 12 2006, 15:49 ET)
Gunsmithing
Know anything about this rifle?  (Started: Jul. 11 2006, 14:14 ET, Last post: Jul. 12 2006, 07:09 ET)
Turkish mauser stock question  (Started: Jul. 11 2006, 20:42 ET, Last post: Jul. 12 2006, 00:00 ET)
Shotgun question  (Started: Jul. 5 2006, 15:16 ET, Last post: Jul. 11 2006, 19:34 ET)
Jamming when pumping quickly
Strength of the hebel fp  (Started: Jul. 7 2006, 01:16 ET, Last post: Jul. 11 2006, 15:21 ET)
Suitable for smokeless?
Convert win 70 barrel from push -> controlled feed  (Started: Jul. 9 2006, 14:56 ET, Last post: Jul. 11 2006, 11:17 ET)
Possible?
.310 martini cadet receiver - which steel?  (Started: Jul. 7 2006, 11:34 ET, Last post: Jul. 10 2006, 10:59 ET)
Receiver steel
.17 liner accuracy?  (Started: Jul. 5 2006, 21:17 ET, Last post: Jul. 8 2006, 14:33 ET)
Any members who can engrave  (Started: Jul. 8 2006, 01:45 ET, Last post: Jul. 8 2006, 01:45 ET)
Or can cnc in what i need
M1 garand..what grease for the op rod?  (Started: Jul. 5 2006, 23:09 ET, Last post: Jul. 7 2006, 22:11 ET)
Explain pillar bedding  (Started: Jul. 6 2006, 06:31 ET, Last post: Jul. 7 2006, 10:50 ET)
Can gurus help me?
Stainless for blackpowder?  (Started: May 3 2006, 21:11 ET, Last post: Jul. 6 2006, 21:27 ET)
Hole center finding  (Started: Jul. 6 2006, 16:16 ET, Last post: Jul. 6 2006, 16:26 ET)
50 bmg action heat treatment  (Started: Jul. 3 2006, 16:45 ET, Last post: Jul. 6 2006, 11:51 ET)
Which is best way to go?
Ar-15 trouble  (Started: Jun. 4 2006, 23:21 ET, Last post: Jul. 5 2006, 17:35 ET)
Bolt stuck
Grade 8 bolt  (Started: Jul. 5 2006, 00:45 ET, Last post: Jul. 5 2006, 01:01 ET)
Grade 8 bolt
M16  (Started: Jun. 27 2006, 19:44 ET, Last post: Jul. 3 2006, 16:12 ET)
Substitute to the 50 cal needed  (Started: Jun. 6 2006, 08:00 ET, Last post: Jul. 2 2006, 12:43 ET)
1 size smaller to comply with laws
Scope rings and bases  (Started: Jun. 28 2006, 20:47 ET, Last post: Jun. 29 2006, 19:53 ET)
How much torque
Jaco pistol  (Started: Jun. 28 2006, 16:38 ET, Last post: Jun. 29 2006, 16:09 ET)
Air compressor...need advice  (Started: Jun. 28 2006, 00:13 ET, Last post: Jun. 29 2006, 00:11 ET)
For beadblasting cabinet
M-16 modes of operation  (Started: Jun. 25 2006, 13:48 ET, Last post: Jun. 28 2006, 14:17 ET)
Full-auto m-16 anymore?
Bending bolts  (Started: Jun. 26 2006, 03:23 ET, Last post: Jun. 28 2006, 00:59 ET)
Rust removal  (Started: Jun. 22 2006, 11:21 ET, Last post: Jun. 27 2006, 18:23 ET)
Rust removal
Small scratch  (Started: Jun. 26 2006, 13:20 ET, Last post: Jun. 27 2006, 14:33 ET)
Gun finnish
Doodus 1911 mag question  (Started: Jun. 19 2006, 23:34 ET, Last post: Jun. 27 2006, 08:23 ET)
Removing finger grip and rail extension  (Started: Jun. 19 2006, 19:54 ET, Last post: Jun. 26 2006, 19:30 ET)
1911 help
M1903 springfield scope instalation  (Started: Jun. 19 2006, 21:35 ET, Last post: Jun. 24 2006, 08:18 ET)
Doubts on scope installation ???
Marking,engraving,stamping guns???  (Started: Jun. 13 2006, 08:21 ET, Last post: Jun. 24 2006, 08:06 ET)
Barrel replacement for hk91/g3 riffle  (Started: Jun. 6 2006, 22:52 ET, Last post: Jun. 23 2006, 06:17 ET)
How to do it? what equipment
Ithaca model 37 firing pin removal  (Started: Jun. 21 2006, 20:30 ET, Last post: Jun. 22 2006, 21:11 ET)
Help
Win model 94  (Started: Jun. 19 2006, 10:37 ET, Last post: Jun. 19 2006, 18:00 ET)
Loading issues
Alot of questions  from a newbie  (Started: Jun. 16 2006, 21:03 ET, Last post: Jun. 19 2006, 15:56 ET)
Countersink chatter  (Started: Jun. 11 2006, 20:22 ET, Last post: Jun. 19 2006, 13:56 ET)
Savage model99 take down  (Started: Jun. 16 2006, 18:31 ET, Last post: Jun. 19 2006, 08:08 ET)
Loose barrel
Cutting a dovetail  (Started: May 30 2006, 23:46 ET, Last post: Jun. 18 2006, 23:17 ET)
Release triggers  (Started: Jun. 17 2006, 23:18 ET, Last post: Jun. 18 2006, 16:03 ET)
Anyone know how to build one?
Falling block rifle  (Started: Jun. 15 2006, 13:42 ET, Last post: Jun. 18 2006, 13:40 ET)
How to cut rect hole for breach
270 wsm  (Started: Jun. 6 2006, 01:35 ET, Last post: Jun. 16 2006, 10:17 ET)
Where to get action
Firing pin replacement  (Started: Jun. 15 2006, 23:07 ET, Last post: Jun. 16 2006, 08:34 ET)
Clarification of conflicting information
Cleaning an old rifle  (Started: Jun. 14 2006, 19:26 ET, Last post: Jun. 15 2006, 10:55 ET)
Muratic acid?
Crush fit  (Started: Jun. 11 2006, 10:46 ET, Last post: Jun. 13 2006, 00:24 ET)
Barrel crowning  (Started: Jun. 11 2006, 13:14 ET, Last post: Jun. 13 2006, 00:20 ET)
Tips needed
Double set triggers  (Started: Jun. 12 2006, 18:07 ET, Last post: Jun. 12 2006, 20:53 ET)
Ak-47 gas pistons  (Started: Jun. 9 2006, 23:57 ET, Last post: Jun. 12 2006, 12:08 ET)
Gas piston length.
Could i do this  (Started: Jun. 11 2006, 11:11 ET, Last post: Jun. 11 2006, 12:34 ET)
Suomi
Tips for tapering  (Started: Jun. 8 2006, 11:35 ET, Last post: Jun. 11 2006, 11:25 ET)
Need a little help  (Started: Jun. 8 2006, 09:54 ET, Last post: Jun. 11 2006, 10:58 ET)
92 winchester
Lengthen a tang - welding  (Started: Jun. 5 2006, 11:00 ET, Last post: Jun. 9 2006, 19:50 ET)
Mossberg 183 with jammed bolt  (Started: Jun. 8 2006, 15:31 ET, Last post: Jun. 8 2006, 15:31 ET)
Hopkins and allen shotgun to rifle?  (Started: Jun. 7 2006, 23:34 ET, Last post: Jun. 8 2006, 10:16 ET)
17 mach 2  (Started: Dec. 27 2005, 18:27 ET, Last post: Jun. 8 2006, 04:36 ET)
Bolt weight
Concentricity of chamber and bore  (Started: Jun. 3 2006, 12:32 ET, Last post: Jun. 5 2006, 11:46 ET)
How far is too far? how to measure?
Trap door rifles  (Started: May 10 2006, 20:41 ET, Last post: Jun. 4 2006, 15:44 ET)
Look simple
Lc smith barrels separated  (Started: May 29 2006, 15:56 ET, Last post: Jun. 3 2006, 12:31 ET)
Ar15 rear sight removal?  (Started: Jun. 2 2006, 21:57 ET, Last post: Jun. 2 2006, 23:57 ET)
Gunsmithing
12 gague specs  (Started: Jun. 2 2006, 16:57 ET, Last post: Jun. 2 2006, 21:57 ET)
My first design
Vertical bandsaw?  (Started: May 30 2006, 20:46 ET, Last post: Jun. 2 2006, 02:25 ET)
Cheap one or plans?
Bolt stuck in sako action  (Started: May 24 2006, 16:08 ET, Last post: Jun. 1 2006, 15:11 ET)
Removing chrome plateing  (Started: May 30 2006, 21:36 ET, Last post: May 31 2006, 13:36 ET)
Davis p-380 disassembly how?  (Started: May 30 2006, 21:04 ET, Last post: May 30 2006, 23:40 ET)
Gunsmithing
Converting a 22-250 to a 204  (Started: May 30 2006, 10:38 ET, Last post: May 30 2006, 11:22 ET)
Removing glued in action  (Started: May 15 2006, 05:15 ET, Last post: May 30 2006, 06:12 ET)
Rechamber 22 lr  (Started: May 28 2006, 14:02 ET, Last post: May 29 2006, 20:30 ET)
Convert hawes single shot 22lr to magnum
Rubber grips & weld seams  (Started: May 25 2006, 13:14 ET, Last post: May 29 2006, 03:14 ET)
Frame/build related questions
Peep sights on pistols  (Started: May 29 2006, 00:49 ET, Last post: May 29 2006, 01:11 ET)
Opinions and how to construct?
Could a ak barrel be reamed to 7.62x51  (Started: May 27 2006, 19:33 ET, Last post: May 28 2006, 01:41 ET)
Wilton machinist's vise  (Started: May 25 2006, 22:28 ET, Last post: May 26 2006, 19:50 ET)
Disassembly?
Function check  (Started: May 23 2006, 15:04 ET, Last post: May 26 2006, 10:04 ET)
Fire damaged firearm  (Started: May 22 2006, 16:46 ET, Last post: May 26 2006, 08:53 ET)
Is a fire damaged rifel worth restoring
High power help needed  (Started: May 25 2006, 19:21 ET, Last post: May 25 2006, 20:32 ET)
Recoil buffer  (Started: May 24 2006, 00:34 ET, Last post: May 25 2006, 02:14 ET)
Homemade buffers?
.270 magnum wildcat  (Started: Apr. 15 2006, 15:27 ET, Last post: May 25 2006, 00:24 ET)
Scope mount question  (Started: May 24 2006, 01:33 ET, Last post: May 24 2006, 23:14 ET)
Thompson semi auto  (Started: May 22 2006, 23:14 ET, Last post: May 24 2006, 14:50 ET)
Parts
G3 vs cetme  (Started: Apr. 18 2006, 20:32 ET, Last post: May 24 2006, 04:02 ET)
Mcmillian stock paint  (Started: May 23 2006, 21:46 ET, Last post: May 24 2006, 03:08 ET)
Where to get some.
Snake/squirrel gun  (Started: May 21 2006, 17:11 ET, Last post: May 24 2006, 00:28 ET)
Soldring a sight base  (Started: May 15 2006, 10:54 ET, Last post: May 23 2006, 08:41 ET)
Barrel question  (Started: May 21 2006, 17:08 ET, Last post: May 22 2006, 21:37 ET)
Star bm - premature slidelock  (Started: May 22 2006, 19:57 ET, Last post: May 22 2006, 19:57 ET)
Welding to repair severe pitting?  (Started: May 18 2006, 19:52 ET, Last post: May 20 2006, 21:01 ET)
Restoring original mauser receiver
Using 12l14 for a receiver  (Started: May 14 2006, 13:14 ET, Last post: May 19 2006, 20:59 ET)
.50 bmg pressures  (Started: May 5 2006, 14:26 ET, Last post: May 19 2006, 19:21 ET)
Converting a mosin nagant to 308  (Started: May 10 2006, 16:10 ET, Last post: May 19 2006, 04:09 ET)
Converting a mosin nagant to 308
Stl and investment casting  (Started: May 15 2006, 15:25 ET, Last post: May 18 2006, 11:38 ET)
Home defense shot gun  (Started: Apr. 23 2006, 09:31 ET, Last post: May 18 2006, 02:23 ET)
Low cost shot guns
Basic pollishing question  (Started: May 15 2006, 22:34 ET, Last post: May 17 2006, 23:31 ET)
Why hasn't this been done before?  (Started: Apr. 27 2006, 00:57 ET, Last post: May 17 2006, 22:18 ET)
Modified bullpup
Sks to ak magazine conversion  (Started: May 7 2006, 17:01 ET, Last post: May 16 2006, 13:20 ET)
Looking for info...cant find it
Which one?  (Started: May 6 2006, 15:24 ET, Last post: May 16 2006, 13:16 ET)
Help picking a rifle
Ruger mark ii  (Started: May 14 2006, 14:34 ET, Last post: May 15 2006, 00:11 ET)
Scope mounting
Straight line bullet seater  (Started: May 11 2006, 09:37 ET, Last post: May 14 2006, 18:39 ET)
Simple blowback design questions  (Started: May 11 2006, 14:23 ET, Last post: May 13 2006, 11:18 ET)
Steel thickness  (Started: May 8 2006, 21:34 ET, Last post: May 13 2006, 08:44 ET)
For jaco
Question on recoil operated guns and barrel-making  (Started: Apr. 25 2006, 22:19 ET, Last post: May 12 2006, 20:15 ET)
A slew of questions that came to mind!
Kp-43  (Started: May 12 2006, 12:08 ET, Last post: May 12 2006, 12:08 ET)
?
Rem 1100  (Started: May 11 2006, 15:33 ET, Last post: May 11 2006, 18:24 ET)
6.8 upper  (Started: May 11 2006, 15:11 ET, Last post: May 11 2006, 16:30 ET)
Mauser differences  (Started: May 9 2006, 23:20 ET, Last post: May 11 2006, 14:04 ET)
Is there any dif between yugo & german?
Polytech stoch finish  (Started: May 10 2006, 20:29 ET, Last post: May 11 2006, 13:04 ET)
.44 magnum  (Started: May 7 2006, 12:31 ET, Last post: May 11 2006, 11:29 ET)
Wall thickness of barrel
#3 buckshot  (Started: May 10 2006, 20:45 ET, Last post: May 10 2006, 20:45 ET)
.250 diameter
Metal suppliers  (Started: May 9 2006, 13:55 ET, Last post: May 10 2006, 10:54 ET)
Remington 7400 port  (Started: May 9 2006, 16:11 ET, Last post: May 9 2006, 17:03 ET)
Jaco pistol plans  (Started: May 5 2006, 23:06 ET, Last post: May 9 2006, 02:48 ET)
Sks help  (Started: May 2 2006, 19:54 ET, Last post: May 8 2006, 17:58 ET)
Question about crowning
Countersink - which one  (Started: May 7 2006, 15:02 ET, Last post: May 8 2006, 09:38 ET)
Interarms mkx stocks  (Started: May 7 2006, 22:02 ET, Last post: May 7 2006, 23:52 ET)
Very shot shotgun question  (Started: May 3 2006, 14:26 ET, Last post: May 6 2006, 17:47 ET)
I did it !!!  (Started: May 6 2006, 13:59 ET, Last post: May 6 2006, 15:59 ET)
Repaired new model pocket 32 rimfire
What can i build?  (Started: May 4 2006, 06:46 ET, Last post: May 5 2006, 21:11 ET)
With these tools
.17 m2 barrels or liners?  (Started: May 4 2006, 20:45 ET, Last post: May 5 2006, 21:02 ET)
Where to get one
Commander/oficers slide  (Started: May 5 2006, 20:09 ET, Last post: May 5 2006, 20:09 ET)
On an 80% frame?
Chikoppe rf design  (Started: May 4 2006, 06:49 ET, Last post: May 4 2006, 14:33 ET)
Will it work for .17m2?
Glass bedding m70  (Started: May 4 2006, 00:17 ET, Last post: May 4 2006, 01:40 ET)
My first build  (Started: Apr. 29 2006, 22:27 ET, Last post: May 4 2006, 01:10 ET)
.38
Replace hand/spring  (Started: May 3 2006, 10:35 ET, Last post: May 3 2006, 10:35 ET)
Remington new model pocket 32 conversion
Got a question for ya  (Started: May 2 2006, 18:45 ET, Last post: May 3 2006, 00:05 ET)
Flair gun strength
Ppsh  (Started: Apr. 30 2006, 11:01 ET, Last post: May 1 2006, 23:29 ET)
No. 4 remington  (Started: Apr. 29 2006, 15:52 ET, Last post: Apr. 30 2006, 15:04 ET)
Lock up problem
Reciver steel  (Started: Apr. 27 2006, 23:29 ET, Last post: Apr. 29 2006, 15:39 ET)
Berreta 92 full auto sear  (Started: Apr. 22 2006, 15:10 ET, Last post: Apr. 28 2006, 05:14 ET)
Shotgun problem - rough chamber, maybe?  (Started: Apr. 22 2006, 02:25 ET, Last post: Apr. 28 2006, 02:47 ET)
Chucking barrel w/o damage  (Started: Apr. 23 2006, 12:54 ET, Last post: Apr. 27 2006, 11:27 ET)
Where is the library??  (Started: Apr. 26 2006, 20:54 ET, Last post: Apr. 26 2006, 21:09 ET)
Wingnut needs help,   again
Ultradot on mkii  (Started: Apr. 20 2006, 16:51 ET, Last post: Apr. 26 2006, 08:24 ET)
Reciever tension calculations  (Started: Apr. 24 2006, 13:10 ET, Last post: Apr. 24 2006, 13:10 ET)
Best custom barrels?  (Started: Apr. 11 2006, 22:56 ET, Last post: Apr. 24 2006, 03:11 ET)
Scope rings  (Started: Apr. 23 2006, 01:16 ET, Last post: Apr. 24 2006, 02:36 ET)
Best way to color a tannery shop  (Started: Apr. 23 2006, 20:56 ET, Last post: Apr. 23 2006, 22:04 ET)
Browning hipower trigger group  (Started: Apr. 15 2006, 16:18 ET, Last post: Apr. 23 2006, 12:18 ET)
Airguns  (Started: Apr. 22 2006, 09:48 ET, Last post: Apr. 23 2006, 05:26 ET)
How do they work?
Remington 700 action  (Started: Apr. 15 2006, 07:48 ET, Last post: Apr. 19 2006, 04:06 ET)
Bolt not closing
Breech material  (Started: Apr. 12 2006, 23:33 ET, Last post: Apr. 19 2006, 03:31 ET)
Type of steel to use for a breech
Ithaca m-49r  (Started: Apr. 18 2006, 18:07 ET, Last post: Apr. 18 2006, 18:07 ET)
Need directions for reassemble
Will it fit  (Started: Apr. 18 2006, 17:14 ET, Last post: Apr. 18 2006, 17:47 ET)
.22 savage stock
M96 swede bolt installation  (Started: Apr. 18 2006, 00:11 ET, Last post: Apr. 18 2006, 16:40 ET)
Making rifled barrels  (Started: Apr. 15 2006, 01:16 ET, Last post: Apr. 18 2006, 11:58 ET)
How is it posible
Beretta barrel bulge  (Started: Apr. 16 2006, 01:36 ET, Last post: Apr. 17 2006, 20:24 ET)
Repair or trim barrel
Bedding compounds  (Started: Apr. 14 2006, 23:34 ET, Last post: Apr. 16 2006, 22:32 ET)
Other than accuglass what else is there?
50 cal accuracy?  (Started: Apr. 15 2006, 15:06 ET, Last post: Apr. 16 2006, 13:05 ET)
Threading a 10/22 receiver?  (Started: Apr. 15 2006, 18:10 ET, Last post: Apr. 16 2006, 01:15 ET)
Beginner stuff  (Started: Apr. 13 2006, 16:28 ET, Last post: Apr. 15 2006, 15:47 ET)
Cylinder chamfer and chamber/ramp polish
Need advice  (Started: Apr. 12 2006, 22:02 ET, Last post: Apr. 14 2006, 09:58 ET)
Bill holmes design, extractor problem  (Started: Apr. 13 2006, 11:46 ET, Last post: Apr. 14 2006, 02:51 ET)
Remington 7400  (Started: Apr. 13 2006, 11:55 ET, Last post: Apr. 13 2006, 11:55 ET)
Need help with bolt and spring weight.  (Started: Apr. 9 2006, 20:47 ET, Last post: Apr. 13 2006, 10:06 ET)
Converting to blank fire?  (Started: Apr. 11 2006, 23:30 ET, Last post: Apr. 12 2006, 15:42 ET)
Locking lug width  (Started: Apr. 9 2006, 11:21 ET, Last post: Apr. 11 2006, 00:00 ET)
Locking lug widths of different bolts
Building a 220 swift, maybe  (Started: Apr. 9 2006, 10:54 ET, Last post: Apr. 10 2006, 23:22 ET)
Savage 110  (Started: Apr. 8 2006, 19:31 ET, Last post: Apr. 10 2006, 19:44 ET)
Bolt release lever
Take down rifles  (Started: Apr. 7 2006, 00:16 ET, Last post: Apr. 10 2006, 13:53 ET)
Is there a best way?
Tube strength?  (Started: Apr. 7 2006, 17:01 ET, Last post: Apr. 9 2006, 15:43 ET)
Which is stronger smt or sht ?
Ryerson stock list  (Started: Apr. 9 2006, 05:16 ET, Last post: Apr. 9 2006, 05:16 ET)
Steel info.
Ar15 ejection port  (Started: Apr. 8 2006, 09:41 ET, Last post: Apr. 9 2006, 03:21 ET)
Need dimensions
Ruger mkii trigger job  (Started: Apr. 8 2006, 17:13 ET, Last post: Apr. 9 2006, 01:23 ET)
Stoning job
Ruger mkii trigger job  (Started: Apr. 8 2006, 01:31 ET, Last post: Apr. 9 2006, 01:17 ET)
Stoning job
Savage mark 2  (Started: Apr. 3 2006, 20:44 ET, Last post: Apr. 9 2006, 00:03 ET)
Bolt disassembly
Tapping aluminum  (Started: Apr. 8 2006, 07:53 ET, Last post: Apr. 8 2006, 21:30 ET)
Barrel secureing  (Started: Apr. 7 2006, 21:48 ET, Last post: Apr. 8 2006, 17:55 ET)
Taurus 445 lockup  (Started: Mar. 28 2006, 16:33 ET, Last post: Apr. 7 2006, 10:30 ET)
Revolver locks up when fired
Ruger m77  (Started: Apr. 4 2006, 21:05 ET, Last post: Apr. 6 2006, 21:10 ET)
Opinons?
Sig discharge noise question  (Started: Apr. 5 2006, 14:35 ET, Last post: Apr. 6 2006, 12:12 ET)
Barrel design noise comparison
Bayonets  (Started: Apr. 2 2006, 20:03 ET, Last post: Apr. 5 2006, 15:31 ET)
Inter change
Screw thread strength  (Started: Apr. 4 2006, 10:40 ET, Last post: Apr. 5 2006, 12:48 ET)
24 vs. 32 tpi
7.62x54r enfield conversion?  (Started: Nov. 13 2005, 03:44 ET, Last post: Apr. 5 2006, 10:46 ET)
Norinco m37 tube extension  (Started: Apr. 4 2006, 21:39 ET, Last post: Apr. 4 2006, 21:39 ET)
Sako finnbear l61r 3006 bolt?  (Started: Feb. 28 2006, 06:27 ET, Last post: Apr. 4 2006, 21:13 ET)
Anyone know where i can find one?
P228 & p229 locking inserts  (Started: Apr. 3 2006, 11:14 ET, Last post: Apr. 3 2006, 15:35 ET)
P228/p229 internal differences
Revolver question  (Started: Apr. 2 2006, 10:46 ET, Last post: Apr. 3 2006, 14:40 ET)
Cylinder timing
Sarco mauser actions  (Started: Apr. 1 2006, 03:57 ET, Last post: Apr. 3 2006, 11:55 ET)
Sarco mauser actions
308 on a mod.38 turk mauser  (Started: Apr. 2 2006, 23:09 ET, Last post: Apr. 3 2006, 09:54 ET)
Atf 11% excise tax  (Started: Apr. 1 2006, 21:34 ET, Last post: Apr. 3 2006, 00:50 ET)
What a bunch of crap
How do ejectors work?  (Started: Mar. 20 2006, 14:57 ET, Last post: Apr. 2 2006, 23:51 ET)
Any blue prints
Rem 700 trigger  (Started: Mar. 30 2006, 22:59 ET, Last post: Apr. 1 2006, 01:13 ET)
Set up question
Need recommendation on .224 cartridge  (Started: Mar. 28 2006, 22:00 ET, Last post: Mar. 31 2006, 23:51 ET)
Talon 9mm  (Started: Mar. 29 2006, 22:55 ET, Last post: Mar. 30 2006, 19:45 ET)
Help
Cast or forged  (Started: Feb. 18 2006, 19:51 ET, Last post: Mar. 30 2006, 18:54 ET)
Sig 228 questions  (Started: Mar. 28 2006, 20:27 ET, Last post: Mar. 30 2006, 16:27 ET)
Poorly designed trigger return spring on cz p01?  (Started: Mar. 27 2006, 15:14 ET, Last post: Mar. 30 2006, 15:22 ET)
Gun shipping question  (Started: Mar. 30 2006, 13:25 ET, Last post: Mar. 30 2006, 15:02 ET)
Need mini 14 part dimension  (Started: Mar. 23 2006, 16:10 ET, Last post: Mar. 29 2006, 12:37 ET)
Scratch-built ar15 who's done it  (Started: Mar. 14 2006, 05:48 ET, Last post: Mar. 29 2006, 08:08 ET)
Plans in the library
How to make a fiberglass stock?  (Started: Mar. 27 2006, 12:42 ET, Last post: Mar. 29 2006, 03:44 ET)
Unchambered ar barrel  (Started: Mar. 28 2006, 11:05 ET, Last post: Mar. 28 2006, 11:05 ET)
In 7.62/308
Alignment marks  (Started: Mar. 21 2006, 17:35 ET, Last post: Mar. 28 2006, 09:24 ET)
Mauser action out of 4140 pre-hard  (Started: Mar. 27 2006, 11:50 ET, Last post: Mar. 28 2006, 02:12 ET)
Is this strong enough
Where to get actions?  (Started: Mar. 27 2006, 05:38 ET, Last post: Mar. 27 2006, 21:02 ET)
Barreled or non barreled bolt actions
Silver soldering a flash hider  (Started: Mar. 26 2006, 22:41 ET, Last post: Mar. 27 2006, 20:06 ET)
Any advice?
Welding & blueing  (Started: Mar. 27 2006, 11:46 ET, Last post: Mar. 27 2006, 16:11 ET)
Ar 80% suppliers  (Started: Mar. 26 2006, 16:41 ET, Last post: Mar. 26 2006, 19:57 ET)
Contender tang dimensions  (Started: Mar. 26 2006, 18:19 ET, Last post: Mar. 26 2006, 19:50 ET)
Need contender tang drawing
This may sound crazy but..  (Started: Mar. 24 2006, 10:29 ET, Last post: Mar. 26 2006, 09:49 ET)
Who here can install a side swing safety on a maus  (Started: Mar. 24 2006, 22:01 ET, Last post: Mar. 24 2006, 22:01 ET)
Bolt weight  (Started: Mar. 22 2006, 01:17 ET, Last post: Mar. 24 2006, 20:08 ET)
.22 magnum
Slide will not go forward part iii  (Started: Mar. 24 2006, 15:30 ET, Last post: Mar. 24 2006, 15:30 ET)
The apocalypse!
4140 steel  (Started: Mar. 22 2006, 02:22 ET, Last post: Mar. 24 2006, 02:49 ET)
Importing from the states  (Started: Mar. 23 2006, 18:40 ET, Last post: Mar. 23 2006, 20:06 ET)
Semi-finished parts.
Hk 94/mp5 series barrel removal and replacement?  (Started: Mar. 12 2006, 18:59 ET, Last post: Mar. 23 2006, 14:54 ET)
Can somebody please show me how?
Pre-travel change on xd pistol  (Started: Mar. 18 2006, 20:23 ET, Last post: Mar. 23 2006, 10:27 ET)
Mauser 24/47 rebarrel  (Started: Mar. 22 2006, 01:39 ET, Last post: Mar. 22 2006, 01:47 ET)
Fix for misaligned mauser scope mounts?  (Started: Mar. 16 2006, 21:15 ET, Last post: Mar. 21 2006, 21:04 ET)
Drilled holes are not in alignment!
Safety margin for barrel thickness?  (Started: Mar. 15 2006, 11:31 ET, Last post: Mar. 21 2006, 20:42 ET)
How much steel is needed for safety?
Trigger pull?  (Started: Mar. 21 2006, 14:28 ET, Last post: Mar. 21 2006, 14:28 ET)
Hk33 trigger pull?
Slide wll not go forward part ii  (Started: Mar. 20 2006, 21:50 ET, Last post: Mar. 21 2006, 14:00 ET)
The gun from hell
Logan lathe drive assembly  (Started: Mar. 19 2006, 20:33 ET, Last post: Mar. 21 2006, 01:17 ET)
Picture
Howa 1500  (Started: Mar. 19 2006, 22:37 ET, Last post: Mar. 21 2006, 00:15 ET)
Bbl thread size
Adding a bhp beavertail  (Started: Mar. 17 2006, 09:11 ET, Last post: Mar. 20 2006, 13:20 ET)
...how is it done?
Slide not going forward  (Started: Mar. 19 2006, 22:56 ET, Last post: Mar. 20 2006, 11:56 ET)
Rust bluing over engraving  (Started: Mar. 19 2006, 18:26 ET, Last post: Mar. 20 2006, 00:23 ET)
Pt940 trigger  (Started: Mar. 11 2006, 11:15 ET, Last post: Mar. 17 2006, 10:23 ET)
Pt940 trigger
Looking for a project  (Started: Mar. 13 2006, 01:33 ET, Last post: Mar. 16 2006, 19:20 ET)
Anyone seen these at sarco
Rem. model 6 parts?  (Started: Mar. 13 2006, 12:19 ET, Last post: Mar. 16 2006, 11:52 ET)
Smith & wesson m & p  (Started: Mar. 15 2006, 23:22 ET, Last post: Mar. 16 2006, 09:58 ET)
Take down
Pre-hardened 4140?  (Started: Mar. 14 2006, 20:17 ET, Last post: Mar. 14 2006, 21:08 ET)
A dumb newbie ?  (Started: Mar. 13 2006, 03:44 ET, Last post: Mar. 14 2006, 05:39 ET)
98 mauser receiver work  (Started: Mar. 13 2006, 22:35 ET, Last post: Mar. 14 2006, 01:21 ET)
M1 garand?  (Started: Mar. 8 2006, 21:02 ET, Last post: Mar. 13 2006, 22:18 ET)
Unpolishing stainless  (Started: Mar. 13 2006, 12:16 ET, Last post: Mar. 13 2006, 19:49 ET)
Cutting a concave radius  (Started: Mar. 9 2006, 08:25 ET, Last post: Mar. 12 2006, 10:34 ET)
92f 80% frame  (Started: Mar. 9 2006, 18:37 ET, Last post: Mar. 11 2006, 21:23 ET)
Idiots guide to gun building  (Started: Mar. 2 2006, 08:36 ET, Last post: Mar. 11 2006, 12:40 ET)
Where should those who not know start?
Lathe question  (Started: Feb. 17 2006, 08:45 ET, Last post: Mar. 10 2006, 07:26 ET)
.357 flare gun  (Started: Dec. 14 2005, 03:42 ET, Last post: Mar. 8 2006, 23:14 ET)
.50 bmg bolt question  (Started: Mar. 6 2006, 08:29 ET, Last post: Mar. 8 2006, 00:18 ET)
38 super  (Started: Mar. 7 2006, 10:04 ET, Last post: Mar. 7 2006, 23:20 ET)
M1 extraction  (Started: Mar. 5 2006, 19:31 ET, Last post: Mar. 7 2006, 18:00 ET)
Titanium 80% ar lowers  (Started: Mar. 7 2006, 12:40 ET, Last post: Mar. 7 2006, 12:40 ET)
Anyone have one of these?
Stellite?  (Started: Mar. 1 2006, 21:51 ET, Last post: Mar. 6 2006, 21:39 ET)
Heat treating 4140 to hrc 30  (Started: Mar. 2 2006, 13:53 ET, Last post: Mar. 6 2006, 18:08 ET)
Will a 2-ton press suffice for ak brl remove/inst?  (Started: Feb. 28 2006, 02:05 ET, Last post: Mar. 6 2006, 01:49 ET)
M1911 slide work  (Started: Mar. 5 2006, 00:58 ET, Last post: Mar. 5 2006, 21:52 ET)
Reversing mods
Checking headspace  (Started: Mar. 4 2006, 20:06 ET, Last post: Mar. 5 2006, 18:41 ET)
Making 41 ae brass from 44 brass  (Started: Mar. 1 2006, 00:20 ET, Last post: Mar. 3 2006, 14:43 ET)
Sprial fluting / venting  (Started: Mar. 2 2006, 00:51 ET, Last post: Mar. 2 2006, 20:14 ET)
Anyone?
Broken ruger .44 carbine trigger guard housing  (Started: Oct. 14 2005, 17:59 ET, Last post: Mar. 2 2006, 20:07 ET)
Help on a fix
Problem with my pistol  (Started: Mar. 1 2006, 19:16 ET, Last post: Mar. 2 2006, 14:48 ET)
Accurize beretta 92  (Started: Feb. 22 2006, 13:47 ET, Last post: Mar. 1 2006, 10:41 ET)
Go  no go  gauge  (Started: Feb. 27 2006, 01:53 ET, Last post: Feb. 28 2006, 11:25 ET)
Trigger  (Started: Feb. 27 2006, 01:35 ET, Last post: Feb. 27 2006, 18:52 ET)
Mauser trigger to mosin-nagant  (Started: Feb. 19 2006, 16:09 ET, Last post: Feb. 27 2006, 12:45 ET)
Fitting mauser trigger to mosin-nagant
G3 build questions  (Started: Feb. 20 2006, 20:48 ET, Last post: Feb. 27 2006, 00:14 ET)
Ithica model 51  (Started: Feb. 24 2006, 22:27 ET, Last post: Feb. 26 2006, 22:20 ET)
Magazine tube spring
.416 barrett  (Started: Feb. 21 2006, 22:14 ET, Last post: Feb. 25 2006, 11:14 ET)
Barrel life
Sleeving barrel threads  (Started: Dec. 3 2005, 14:07 ET, Last post: Feb. 25 2006, 08:42 ET)
257 wby from 7mm rem mag  (Started: Dec. 28 2005, 18:38 ET, Last post: Feb. 25 2006, 08:36 ET)
Case forming
Can a rem 700 barrel be used to make a barrel for  (Started: Jan. 2 2006, 00:17 ET, Last post: Feb. 25 2006, 08:34 ET)
A semiauto .308 rifle (hkg3, fal, etc)
Problem with homebuilt 1911  (Started: Feb. 25 2006, 03:05 ET, Last post: Feb. 25 2006, 08:14 ET)
Correcting m700 headspace  (Started: Feb. 24 2006, 20:18 ET, Last post: Feb. 24 2006, 20:38 ET)
Full choke too mod  (Started: Feb. 24 2006, 02:26 ET, Last post: Feb. 24 2006, 15:21 ET)
Prec. revolver conversion  (Started: Feb. 22 2006, 23:10 ET, Last post: Feb. 24 2006, 10:39 ET)
Conversion
Scout pistol  (Started: Feb. 6 2006, 03:35 ET, Last post: Feb. 23 2006, 09:29 ET)
Mauser heat treating  (Started: Feb. 21 2006, 20:22 ET, Last post: Feb. 22 2006, 23:06 ET)
Need to find a heat treater
Vent ribs  (Started: Feb. 18 2006, 23:43 ET, Last post: Feb. 22 2006, 19:06 ET)
How did they do that?
Action bedding for a savage/  (Started: Feb. 19 2006, 18:43 ET, Last post: Feb. 22 2006, 08:36 ET)
Krag sight screw size?  (Started: Feb. 21 2006, 16:08 ET, Last post: Feb. 21 2006, 16:12 ET)
Diameter and pitch of a 1898 krag sight
Ruger 10/22 magnum barrel for hornet  (Started: Dec. 19 2005, 19:02 ET, Last post: Feb. 20 2006, 21:52 ET)
What do you guys think?
Sterling 22  (Started: Feb. 19 2006, 10:31 ET, Last post: Feb. 20 2006, 18:16 ET)
Model 302
Straight-blowback shotgun- how well do they work?  (Started: Feb. 20 2006, 08:28 ET, Last post: Feb. 20 2006, 08:28 ET)
Cutting a 1911 barrel  (Started: Jan. 25 2006, 09:11 ET, Last post: Feb. 19 2006, 07:07 ET)
More 50 cal design questions  (Started: Dec. 26 2005, 14:43 ET, Last post: Feb. 18 2006, 22:12 ET)
Clairification needed  (Started: Feb. 16 2006, 10:11 ET, Last post: Feb. 18 2006, 13:22 ET)
1911 models
.410 info  (Started: Jan. 23 2006, 22:26 ET, Last post: Feb. 17 2006, 03:44 ET)
Ppsh-41  (Started: Feb. 12 2006, 22:11 ET, Last post: Feb. 16 2006, 23:46 ET)
Building a semi-auto
Type of steel to use  (Started: Feb. 15 2006, 14:41 ET, Last post: Feb. 16 2006, 09:26 ET)
New rolling block pins
Long barrel pistol  (Started: Feb. 7 2005, 18:27 ET, Last post: Feb. 15 2006, 15:27 ET)
Legal question
Winchester 1897 hammer help  (Started: Feb. 11 2006, 15:35 ET, Last post: Feb. 15 2006, 09:29 ET)
Gas operated semi auto  (Started: Feb. 10 2006, 07:06 ET, Last post: Feb. 14 2006, 10:45 ET)
How do they work?
45 a.c.p. conversion?  (Started: Feb. 13 2006, 21:40 ET, Last post: Feb. 14 2006, 10:38 ET)
Preparation for finish  (Started: Feb. 11 2006, 08:23 ET, Last post: Feb. 14 2006, 10:25 ET)
Brush hard crome
Installing a barrel on a rifle?  (Started: Feb. 11 2006, 00:21 ET, Last post: Feb. 14 2006, 08:04 ET)
Where to get a single mag follower?  (Started: Feb. 14 2006, 00:48 ET, Last post: Feb. 14 2006, 00:53 ET)
Old stevens shotgun question  (Started: Feb. 13 2006, 21:10 ET, Last post: Feb. 13 2006, 23:08 ET)
Fal  (Started: Feb. 11 2006, 20:07 ET, Last post: Feb. 13 2006, 15:25 ET)
Headspace  (Started: Feb. 12 2006, 10:08 ET, Last post: Feb. 12 2006, 15:00 ET)
.22mag/.17 hmr
Cutting magazine rails  (Started: Feb. 7 2006, 14:15 ET, Last post: Feb. 11 2006, 13:33 ET)
Radius of magazine rails
Need help/advice on serrations  (Started: Feb. 9 2006, 23:08 ET, Last post: Feb. 10 2006, 23:07 ET)
Cutting slide top serrations with a mill
Garand rebarelling  (Started: Feb. 6 2006, 00:33 ET, Last post: Feb. 10 2006, 10:55 ET)
Synthetic rifle stock  (Started: Feb. 8 2006, 19:52 ET, Last post: Feb. 9 2006, 20:42 ET)
Diys molding
Sear/disconnector fitting on ar  (Started: Feb. 7 2006, 00:53 ET, Last post: Feb. 9 2006, 18:46 ET)
Cutting a dovetail  (Started: Feb. 8 2006, 09:33 ET, Last post: Feb. 8 2006, 18:41 ET)
Make a milled ak kit into a working gun  (Started: Jan. 31 2006, 13:50 ET, Last post: Feb. 8 2006, 15:04 ET)
Front sight dovetail  (Started: Feb. 6 2006, 22:23 ET, Last post: Feb. 7 2006, 14:03 ET)
Repair
Shotgun stock help  (Started: Jan. 25 2006, 16:22 ET, Last post: Feb. 6 2006, 22:26 ET)
Kimber 84m trigger  (Started: Feb. 3 2006, 19:20 ET, Last post: Feb. 3 2006, 19:20 ET)
Adjusting trigger
Makarov  (Started: Feb. 3 2006, 06:06 ET, Last post: Feb. 3 2006, 06:06 ET)
Makarov 80% frame
How different are the g#'s and fal metric or std?  (Started: Feb. 1 2006, 21:47 ET, Last post: Feb. 2 2006, 19:16 ET)
12l14 for 22lr?  (Started: Jan. 25 2006, 06:18 ET, Last post: Feb. 2 2006, 14:33 ET)
Ak flat jig  (Started: Jan. 28 2006, 05:40 ET, Last post: Jan. 30 2006, 21:49 ET)
Zb30 and bren compatibility  (Started: Jan. 29 2006, 00:44 ET, Last post: Jan. 29 2006, 12:39 ET)
Marlin model 60 mag conversion?  (Started: Jan. 28 2006, 01:08 ET, Last post: Jan. 28 2006, 01:08 ET)
Useing mag from model 70
Grade 8 bolt  (Started: Jan. 27 2006, 13:18 ET, Last post: Jan. 27 2006, 18:12 ET)
50cal bmg design  (Started: Oct. 28 2005, 14:34 ET, Last post: Jan. 26 2006, 16:37 ET)
50cal bmg design
Drilling and taping oil question.  (Started: Jan. 21 2006, 22:57 ET, Last post: Jan. 26 2006, 12:03 ET)
Gunsmith needed in nw iowa!!  (Started: Jan. 23 2006, 10:20 ET, Last post: Jan. 25 2006, 19:27 ET)
Rechambering a custom rifle
Machining  (Started: Jan. 23 2006, 11:30 ET, Last post: Jan. 25 2006, 18:19 ET)
Enfield action jamming  (Started: Jan. 20 2006, 03:16 ET, Last post: Jan. 25 2006, 16:36 ET)
Source for h&k replacement parts  (Started: Jan. 24 2006, 21:18 ET, Last post: Jan. 25 2006, 13:32 ET)
Bolt material  (Started: Jan. 19 2006, 11:49 ET, Last post: Jan. 25 2006, 03:23 ET)
Redrilling scope for base  (Started: Jan. 18 2006, 00:17 ET, Last post: Jan. 22 2006, 22:10 ET)
Help
Equipment to sharpen end mills  (Started: Jan. 21 2006, 16:33 ET, Last post: Jan. 22 2006, 12:10 ET)
Equipment to sharpen end mills
How to become a dealer  (Started: Jan. 21 2006, 01:22 ET, Last post: Jan. 22 2006, 03:03 ET)
Had to ask you guys too.
Using thread cutting dies question  (Started: Jan. 21 2006, 05:33 ET, Last post: Jan. 21 2006, 10:30 ET)
How to use 'em?
Rem 870 question  (Started: Jan. 16 2006, 19:33 ET, Last post: Jan. 21 2006, 02:42 ET)
Will 3" steel shells function?
Improved 25-06  (Started: Jan. 14 2006, 19:46 ET, Last post: Jan. 20 2006, 18:31 ET)
Would it be worthwhile in a 22" barrel?
Duracoat electric colors  (Started: Jan. 20 2006, 02:45 ET, Last post: Jan. 20 2006, 02:45 ET)
Anyone ever use the wild colors?
22lr reamer  (Started: Jan. 19 2006, 00:56 ET, Last post: Jan. 20 2006, 00:12 ET)
Match reamer
300 ultra gone sour  (Started: Jan. 14 2006, 15:38 ET, Last post: Jan. 19 2006, 23:25 ET)
Contender underlug  (Started: Jan. 13 2006, 17:46 ET, Last post: Jan. 19 2006, 17:48 ET)
Welding rod question  (Started: Jan. 18 2006, 14:39 ET, Last post: Jan. 19 2006, 09:27 ET)
Removing a piston in a romy kit  (Started: Jan. 17 2006, 23:24 ET, Last post: Jan. 19 2006, 01:57 ET)
Remington 740 / 870 sizes  (Started: Jan. 17 2006, 06:22 ET, Last post: Jan. 18 2006, 10:43 ET)
A unique question for the "gurus"
Semi-auto mac 10 .45  (Started: Jan. 17 2006, 22:27 ET, Last post: Jan. 18 2006, 10:16 ET)
First build
Length of a krink piston?  (Started: Jan. 17 2006, 23:56 ET, Last post: Jan. 17 2006, 23:56 ET)
How do i disassemble a sako finnbear bolt?  (Started: Jan. 17 2006, 23:44 ET, Last post: Jan. 17 2006, 23:44 ET)
7mm rem mag deluxe model
Cutting 1911 rails with a dremel.  (Started: Dec. 12 2005, 03:14 ET, Last post: Jan. 17 2006, 06:37 ET)
Need help starting a project
C.u.p.?  (Started: Jan. 14 2006, 14:41 ET, Last post: Jan. 16 2006, 21:01 ET)
45-70 pressures
Re-zero removeable scope mounts  (Started: Jan. 10 2006, 10:09 ET, Last post: Jan. 16 2006, 13:40 ET)
Build one? - buy one?
Nickel remove  (Started: Jan. 14 2006, 13:16 ET, Last post: Jan. 15 2006, 17:34 ET)
Open bolt tec-9 blueprints?  (Started: Jan. 15 2006, 15:06 ET, Last post: Jan. 15 2006, 15:06 ET)
Belt sander drawings.  (Started: Dec. 28 2005, 09:15 ET, Last post: Jan. 14 2006, 12:48 ET)
Mauser clip conversions  (Started: Jan. 13 2006, 09:47 ET, Last post: Jan. 13 2006, 23:46 ET)
1911 slide stop  (Started: Jan. 9 2006, 09:29 ET, Last post: Jan. 11 2006, 23:40 ET)
How to fit a new extractor.  (Started: Oct. 26 2005, 00:44 ET, Last post: Jan. 10 2006, 23:14 ET)
Bore sighter  (Started: Jan. 9 2006, 13:11 ET, Last post: Jan. 10 2006, 22:34 ET)
Looking to get one. advice?
Need help  (Started: Jan. 9 2006, 18:26 ET, Last post: Jan. 10 2006, 17:28 ET)
Harington richardson .38
Parkerizing help needed  (Started: Jan. 8 2006, 19:41 ET, Last post: Jan. 10 2006, 15:57 ET)
Beretta 92fs front sight  (Started: Jan. 7 2006, 03:41 ET, Last post: Jan. 10 2006, 14:27 ET)
Head space?  (Started: Jan. 8 2006, 17:04 ET, Last post: Jan. 9 2006, 06:55 ET)
Hk33 trunion?  (Started: Jan. 7 2006, 18:27 ET, Last post: Jan. 9 2006, 00:35 ET)
Sarco red training pistol fix?  (Started: Jan. 7 2006, 22:03 ET, Last post: Jan. 8 2006, 22:07 ET)
Inherited a triple barrel  (Started: Jan. 5 2006, 17:13 ET, Last post: Jan. 8 2006, 16:31 ET)
Need new spring and sight
Enfield n1 mkiii headspace fix?  (Started: Jan. 4 2006, 20:43 ET, Last post: Jan. 7 2006, 22:54 ET)
Collector's armory  (Started: Jan. 7 2006, 12:45 ET, Last post: Jan. 7 2006, 12:45 ET)
Dimensional accuracy?
M-4 carbine problem  (Started: Jan. 5 2006, 19:30 ET, Last post: Jan. 6 2006, 19:12 ET)
Gasport burr
Bill holmes pistol  (Started: Jan. 4 2006, 14:23 ET, Last post: Jan. 6 2006, 00:25 ET)
Unkown steel grade  (Started: Dec. 21 2005, 15:24 ET, Last post: Jan. 5 2006, 21:18 ET)
How can i tell what it is?
Remington #1 derringer, 41 rimfire  (Started: Jan. 1 2006, 20:45 ET, Last post: Jan. 5 2006, 21:13 ET)
I have a couple of questions...
Smith & wesson single action .38 s&w model 2  (Started: Jan. 3 2006, 16:09 ET, Last post: Jan. 5 2006, 21:08 ET)
Eaa witness 45  (Started: Jan. 1 2006, 10:37 ET, Last post: Jan. 4 2006, 23:30 ET)
Feed problem
Ruger 38-40  (Started: Jan. 3 2006, 10:55 ET, Last post: Jan. 3 2006, 20:22 ET)
The path of least resistance
80% 1911 with 7'' barrel  (Started: Dec. 19 2005, 01:10 ET, Last post: Jan. 3 2006, 08:34 ET)
Cz fp auxilliary lock idea  (Started: Jan. 3 2006, 01:34 ET, Last post: Jan. 3 2006, 01:34 ET)
Flare pistol lock.
Krink flash hider?  (Started: Jan. 2 2006, 23:23 ET, Last post: Jan. 2 2006, 23:23 ET)
Ect chamber reamer  (Started: Dec. 28 2005, 19:03 ET, Last post: Jan. 2 2006, 13:43 ET)
Comments?
Nef ultra rifle .223 rem  (Started: Dec. 29 2005, 19:51 ET, Last post: Dec. 30 2005, 12:38 ET)
Need some help please
Guru plz help  (Started: Dec. 26 2005, 01:00 ET, Last post: Dec. 29 2005, 16:45 ET)
M12 winchester  (Started: Dec. 25 2005, 16:51 ET, Last post: Dec. 29 2005, 12:37 ET)
Chicopee rf question  (Started: Dec. 26 2005, 01:50 ET, Last post: Dec. 28 2005, 03:43 ET)
Ak flat folder plans?  (Started: Dec. 21 2005, 02:08 ET, Last post: Dec. 26 2005, 11:06 ET)
P.a luty diy subgun  (Started: Dec. 4 2005, 20:04 ET, Last post: Dec. 24 2005, 13:29 ET)
80% help in wa?  (Started: Dec. 24 2005, 05:11 ET, Last post: Dec. 24 2005, 11:41 ET)
Rent a reamer?  (Started: Dec. 22 2005, 18:12 ET, Last post: Dec. 23 2005, 19:56 ET)
Annealing steel with a propane torch  (Started: Dec. 21 2005, 14:01 ET, Last post: Dec. 21 2005, 23:40 ET)
Whats involved in a mac .45 build?  (Started: Dec. 16 2005, 00:51 ET, Last post: Dec. 21 2005, 21:39 ET)
22 pellet barrel to be used for a diy 22 pistl?  (Started: Dec. 11 2005, 05:10 ET, Last post: Dec. 21 2005, 01:02 ET)
Model 700 sps action lenght  (Started: Dec. 19 2005, 19:04 ET, Last post: Dec. 20 2005, 03:11 ET)
Series 80 beavertail  (Started: Dec. 18 2005, 19:41 ET, Last post: Dec. 18 2005, 22:50 ET)
Will it work in a series 70 ?
Convert 22 mossberg carbine to 17 mach 2  (Started: Dec. 13 2005, 20:39 ET, Last post: Dec. 18 2005, 09:31 ET)
Can it be done?
L1a1 century %80,there any dwgs to complete it?  (Started: Dec. 15 2005, 02:05 ET, Last post: Dec. 16 2005, 11:44 ET)
Also what kits would this work with?
Tranquilizer dart gun  (Started: Dec. 13 2005, 21:18 ET, Last post: Dec. 15 2005, 02:21 ET)
Link needs to be installed  (Started: Dec. 12 2005, 20:24 ET, Last post: Dec. 13 2005, 23:22 ET)
Help with removing the pin in the bolt
Csp barrel micrometer  (Started: Dec. 12 2005, 10:36 ET, Last post: Dec. 12 2005, 21:35 ET)
Need advice
Remington 1100 2 3/4" to 3.5"  (Started: Dec. 7 2005, 16:28 ET, Last post: Dec. 10 2005, 21:37 ET)
Conversion
Restocking gevarm .22  (Started: Dec. 8 2005, 10:43 ET, Last post: Dec. 9 2005, 10:10 ET)
Swedish rifling machines  (Started: Dec. 2 2005, 01:10 ET, Last post: Dec. 9 2005, 07:12 ET)
Old style
Bisley grip frame conversion  (Started: Dec. 8 2005, 14:25 ET, Last post: Dec. 8 2005, 14:25 ET)
Best way
Question on eye duster marlin  (Started: Dec. 4 2005, 22:21 ET, Last post: Dec. 8 2005, 12:43 ET)
Need help fixing my marlin
M1 carbine: how strong is it?  (Started: Dec. 5 2005, 09:08 ET, Last post: Dec. 7 2005, 10:56 ET)
Cartridge conversion
Where can i find an ar-7 pistol conversion kit?  (Started: Dec. 6 2005, 09:02 ET, Last post: Dec. 6 2005, 20:52 ET)
Restocking model 70  (Started: Dec. 4 2005, 18:19 ET, Last post: Dec. 4 2005, 21:54 ET)
Not a plastic lover
Sine bar for rifling machine  (Started: Nov. 29 2005, 16:27 ET, Last post: Dec. 4 2005, 16:22 ET)
Sine bar for rifling machine
Online machinist training  (Started: Dec. 3 2005, 19:36 ET, Last post: Dec. 4 2005, 10:11 ET)
New twist on old question
Chamber reaming a .45 barrel  (Started: Dec. 3 2005, 17:06 ET, Last post: Dec. 4 2005, 09:38 ET)
4140 steel  (Started: Nov. 17 2005, 11:17 ET, Last post: Dec. 3 2005, 14:16 ET)
Where to find
Browning hp question  (Started: Nov. 30 2005, 14:52 ET, Last post: Dec. 1 2005, 15:11 ET)
Hammer malfunction
Fitting g.i bolt to poly m14  (Started: Nov. 28 2005, 21:40 ET, Last post: Dec. 1 2005, 15:07 ET)
What grade steel are the 1911 %80 frames cast from  (Started: Nov. 30 2005, 02:07 ET, Last post: Nov. 30 2005, 02:07 ET)
Standard pump shotgun magazine tube thread?  (Started: Nov. 28 2005, 20:43 ET, Last post: Nov. 29 2005, 16:23 ET)
Wildcat 375  (Started: Nov. 28 2005, 19:04 ET, Last post: Nov. 29 2005, 11:12 ET)
Rossi sight threads  (Started: Nov. 26 2005, 12:23 ET, Last post: Nov. 26 2005, 17:44 ET)
Trying to figure out what they are
Single barrel shotgun id  (Started: Nov. 16 2005, 19:47 ET, Last post: Nov. 24 2005, 09:29 ET)
Ruger bisley  (Started: Nov. 24 2005, 08:52 ET, Last post: Nov. 24 2005, 09:01 ET)
Ak barrel removal  (Started: Nov. 21 2005, 17:00 ET, Last post: Nov. 24 2005, 00:04 ET)
Help needed
Tightening up a ak stock?  (Started: Nov. 20 2005, 18:59 ET, Last post: Nov. 23 2005, 19:36 ET)
Any suggestions?
Hi-"stupid"  (Started: Nov. 16 2005, 19:30 ET, Last post: Nov. 23 2005, 19:18 ET)
Hi-standards got me stumped.
Looking for material  (Started: Nov. 20 2005, 16:51 ET, Last post: Nov. 23 2005, 12:27 ET)
Titanium t1-8al-1mo-1v
First post here  (Started: Nov. 20 2005, 16:43 ET, Last post: Nov. 22 2005, 13:48 ET)
Mausers and common sense
Yugo sks barrel threads  (Started: Nov. 14 2005, 11:55 ET, Last post: Nov. 21 2005, 20:26 ET)
Barrels
Pinned ar buffers???  (Started: Nov. 21 2005, 14:13 ET, Last post: Nov. 21 2005, 14:58 ET)
Uzi bolt reworked for the mini ?  (Started: Nov. 20 2005, 18:17 ET, Last post: Nov. 20 2005, 18:17 ET)
Rework a full size uzi bolt & striker
Where to test fire  (Started: Nov. 14 2005, 11:58 ET, Last post: Nov. 20 2005, 12:01 ET)
Winchester 670 rebarrel questions  (Started: Nov. 6 2005, 18:12 ET, Last post: Nov. 20 2005, 01:46 ET)
Long story, couple of quick questions
Shotgun stock shape/semiinlet service  (Started: Nov. 19 2005, 13:00 ET, Last post: Nov. 20 2005, 01:14 ET)
Heat treating small ring mausers  (Started: Nov. 16 2005, 00:27 ET, Last post: Nov. 19 2005, 10:48 ET)
How strong can they be?
9mm  ak 74 bizon  (Started: Nov. 14 2005, 12:11 ET, Last post: Nov. 19 2005, 08:11 ET)
Remington 870 problem  (Started: Nov. 16 2005, 21:39 ET, Last post: Nov. 17 2005, 23:47 ET)
In need help
Looking for 1/16" crs  (Started: Nov. 17 2005, 14:47 ET, Last post: Nov. 17 2005, 20:43 ET)
New model smith & wesson hand  (Started: Nov. 17 2005, 20:19 ET, Last post: Nov. 17 2005, 20:19 ET)
Simple centerfire action  (Started: Nov. 13 2005, 10:54 ET, Last post: Nov. 17 2005, 02:56 ET)
Interarms mark x trigger adjustment  (Started: Nov. 14 2005, 18:35 ET, Last post: Nov. 15 2005, 13:40 ET)
Contact info for mattskssupplies  (Started: Oct. 23 2005, 09:28 ET, Last post: Nov. 15 2005, 12:59 ET)
Looking for a e-mail or phone #
Sand blasting media  (Started: Nov. 9 2005, 11:30 ET, Last post: Nov. 15 2005, 11:58 ET)
Nef forearm spacer replacement.  (Started: Nov. 13 2005, 16:16 ET, Last post: Nov. 13 2005, 22:17 ET)
Suggestions?
Glock model 20 question  (Started: Nov. 10 2005, 22:41 ET, Last post: Nov. 13 2005, 22:16 ET)
Loose firing pin?
Barrel liners  (Started: Nov. 1 2005, 18:01 ET, Last post: Nov. 12 2005, 23:02 ET)
Stand alone? or minimum sleeving?
Rem 700 barrel torque  (Started: Nov. 9 2005, 03:22 ET, Last post: Nov. 12 2005, 18:24 ET)
.30 carbine g-36?  (Started: Nov. 9 2005, 18:58 ET, Last post: Nov. 10 2005, 14:34 ET)
Looking to build a falling block  (Started: Nov. 9 2005, 13:44 ET, Last post: Nov. 10 2005, 11:24 ET)
Best places to start
Ar 16" short chambered?  (Started: Nov. 5 2005, 22:49 ET, Last post: Nov. 7 2005, 14:25 ET)
Single shot .222  (Started: Nov. 7 2005, 00:41 ET, Last post: Nov. 7 2005, 02:12 ET)
How to?
What glue i can use to paste the templates?  (Started: Nov. 4 2005, 04:14 ET, Last post: Nov. 7 2005, 00:25 ET)
Soldering a double  barrel  (Started: Nov. 6 2005, 21:23 ET, Last post: Nov. 6 2005, 22:32 ET)
Soldering
Robostock? rogervich, did you ever  (Started: Nov. 6 2005, 15:26 ET, Last post: Nov. 6 2005, 17:06 ET)
Finish it?
222 rimmed  (Started: Oct. 23 2005, 10:45 ET, Last post: Nov. 5 2005, 22:11 ET)
Bullpup ar  (Started: Oct. 25 2005, 22:11 ET, Last post: Nov. 5 2005, 20:54 ET)
.308 enfield ?  (Started: Nov. 4 2005, 23:02 ET, Last post: Nov. 5 2005, 19:07 ET)
Need help with colt 1892 crane bushing  (Started: Nov. 4 2005, 13:03 ET, Last post: Nov. 5 2005, 16:42 ET)
Can't get the crane bushing out
Browning buckmark firing pin assembly  (Started: Nov. 2 2005, 00:08 ET, Last post: Nov. 5 2005, 16:38 ET)
Cutting a kimber sight  (Started: Nov. 3 2005, 15:26 ET, Last post: Nov. 3 2005, 15:26 ET)
Building a 1911  (Started: Nov. 3 2005, 13:52 ET, Last post: Nov. 3 2005, 14:04 ET)
Resilient breech firearm?  (Started: Nov. 1 2005, 06:39 ET, Last post: Nov. 3 2005, 13:31 ET)
Patent 5924230, revolving bolt, no slide
Wanna build a .223.  (Started: Nov. 1 2005, 03:18 ET, Last post: Nov. 3 2005, 04:57 ET)
What to do?
Ar15 pressure release hole  (Started: Oct. 23 2005, 23:09 ET, Last post: Nov. 2 2005, 19:15 ET)
What's its function?
What to do? becoming a gunsmith.  (Started: Oct. 30 2005, 04:07 ET, Last post: Oct. 31 2005, 22:50 ET)
Gunsmithing
.22 hornet from 10/22?  (Started: Oct. 31 2005, 16:08 ET, Last post: Oct. 31 2005, 19:00 ET)
Can you?
Ar15 finishing up help!!??  (Started: Oct. 28 2005, 23:55 ET, Last post: Oct. 29 2005, 22:46 ET)
Proper bolt catch operation, 1 other q??
Colt saa barrel  (Started: Oct. 28 2005, 23:17 ET, Last post: Oct. 28 2005, 23:17 ET)
Correct type
45 barrels  (Started: Oct. 27 2005, 21:01 ET, Last post: Oct. 28 2005, 20:34 ET)
45 acp, colt ?
Marlin 925 bolt action .22lr  (Started: Oct. 26 2005, 19:00 ET, Last post: Oct. 28 2005, 16:45 ET)
Cartridge rarely ejects, help!
Piloted drill bit  (Started: Oct. 27 2005, 09:25 ET, Last post: Oct. 28 2005, 11:32 ET)
Rechambering the 7.5x55 rifle?  (Started: Oct. 22 2005, 21:00 ET, Last post: Oct. 27 2005, 03:27 ET)
Roto barrels???  (Started: Oct. 25 2005, 16:40 ET, Last post: Oct. 26 2005, 10:42 ET)
1911 roto barrels from sarco junk or not
S&w cylinder  (Started: Oct. 25 2005, 18:44 ET, Last post: Oct. 25 2005, 18:44 ET)
44mag to 45long colt
Grinding a single point cutter  (Started: Oct. 24 2005, 11:13 ET, Last post: Oct. 25 2005, 17:26 ET)
Grinding a single point cutter
Hard chrome and safety  (Started: Oct. 20 2005, 12:50 ET, Last post: Oct. 25 2005, 05:12 ET)
Daewoo dr200 and the ar15 uppers  (Started: Oct. 20 2005, 02:25 ET, Last post: Oct. 24 2005, 19:51 ET)
Will the dr200 work on the ar15?
Sten magazine markings  (Started: Oct. 19 2005, 16:27 ET, Last post: Oct. 24 2005, 14:33 ET)
How can i build my own magazine spring?  (Started: Oct. 15 2005, 15:42 ET, Last post: Oct. 22 2005, 11:26 ET)
Can i rebend an existing spring?
Slide serations  (Started: Oct. 13 2005, 23:38 ET, Last post: Oct. 22 2005, 00:04 ET)
Machining slide serations
Rescuing an old barrel  (Started: Oct. 19 2005, 16:05 ET, Last post: Oct. 21 2005, 18:57 ET)
Restoration
Hard chome.....  (Started: Oct. 13 2005, 21:26 ET, Last post: Oct. 21 2005, 15:08 ET)
Hard chrome kits and effectiveness.
Help needed refinishing plastic!! (ak74 parts)  (Started: Oct. 17 2005, 19:31 ET, Last post: Oct. 21 2005, 11:11 ET)
Please atleast look guru's
Percussion locks  (Started: Oct. 15 2005, 10:57 ET, Last post: Oct. 21 2005, 00:27 ET)
Hall breechloader patent #?  (Started: Oct. 20 2005, 21:21 ET, Last post: Oct. 20 2005, 21:21 ET)
"chatter" marks in chamber  (Started: Oct. 9 2005, 12:14 ET, Last post: Oct. 19 2005, 07:17 ET)
742 mods  (Started: Oct. 19 2005, 01:17 ET, Last post: Oct. 19 2005, 01:17 ET)
Pump action mod
Help  (Started: Sep. 29 2005, 20:57 ET, Last post: Oct. 19 2005, 00:38 ET)
Library
Llama pistol magazines  (Started: Oct. 8 2005, 20:44 ET, Last post: Oct. 18 2005, 14:06 ET)
Firing pin location ?  (Started: Oct. 11 2005, 16:53 ET, Last post: Oct. 17 2005, 21:09 ET)
For a rimfire
Remington 1187 ejector?  (Started: Oct. 17 2005, 13:22 ET, Last post: Oct. 17 2005, 19:43 ET)
Staked on left inside of barrel
Welding slides  (Started: Oct. 10 2005, 21:37 ET, Last post: Oct. 16 2005, 12:59 ET)
How to weld a 4140 slide?
Ar15 99% done!!! need some help  (Started: Oct. 7 2005, 00:22 ET, Last post: Oct. 15 2005, 00:48 ET)
1 more thing, great project
Sten barrel  (Started: Oct. 11 2005, 15:23 ET, Last post: Oct. 14 2005, 23:37 ET)
Cap-n-ball conversion  (Started: Oct. 14 2005, 00:46 ET, Last post: Oct. 14 2005, 02:26 ET)
Want to convert 1858 remington
Commander type hammer for llama  (Started: Oct. 13 2005, 15:55 ET, Last post: Oct. 13 2005, 18:03 ET)
Where to find this
Mauser barrels interchange question  (Started: Oct. 8 2005, 19:22 ET, Last post: Oct. 12 2005, 19:48 ET)
Kar98a vs. gew98
Doubling model 29  (Started: May 23 2005, 18:04 ET, Last post: Oct. 11 2005, 23:51 ET)
Contender dovetail  (Started: Oct. 11 2005, 22:50 ET, Last post: Oct. 11 2005, 22:50 ET)
Dragunov kit  (Started: Oct. 10 2005, 23:18 ET, Last post: Oct. 10 2005, 23:40 ET)
Model 670 rebarrel  (Started: Oct. 8 2005, 21:43 ET, Last post: Oct. 10 2005, 11:47 ET)
Alternative rifling  (Started: Oct. 4 2005, 13:52 ET, Last post: Oct. 10 2005, 09:50 ET)
What's out there?
Barrel run-out  (Started: Oct. 9 2005, 17:56 ET, Last post: Oct. 9 2005, 17:56 ET)
Blow back systems  (Started: Oct. 5 2005, 12:49 ET, Last post: Oct. 9 2005, 17:16 ET)
Pre-64 win. mod. 70  (Started: Oct. 9 2005, 16:50 ET, Last post: Oct. 9 2005, 16:50 ET)
Setting barrel back
Trigger group  (Started: Oct. 6 2005, 04:18 ET, Last post: Oct. 7 2005, 09:49 ET)
...need help with making a trigger group
Help reading msds  (Started: Oct. 5 2005, 22:09 ET, Last post: Oct. 6 2005, 14:28 ET)
No good at cypherin'!
Beretta 92 and llama m-82 barrels  (Started: Oct. 6 2005, 10:32 ET, Last post: Oct. 6 2005, 10:32 ET)
Malin 336 rebarel  (Started: Oct. 5 2005, 14:08 ET, Last post: Oct. 6 2005, 01:02 ET)
Need schematic...  (Started: Oct. 6 2005, 00:48 ET, Last post: Oct. 6 2005, 00:48 ET)
742 breech bolt schematic
Pre-64 win. mod. 70  (Started: Oct. 3 2005, 21:40 ET, Last post: Oct. 5 2005, 21:53 ET)
Extractor
.45 acp conversion for small ring mauser?  (Started: Oct. 4 2005, 17:58 ET, Last post: Oct. 5 2005, 18:09 ET)
Bolt mods?
Remington magazine tube replacement  (Started: Sep. 1 2005, 18:41 ET, Last post: Oct. 5 2005, 15:26 ET)
Rossi large loop model 92  (Started: Oct. 3 2005, 19:19 ET, Last post: Oct. 3 2005, 20:47 ET)
Fp spring for fdc action  (Started: Oct. 3 2005, 19:11 ET, Last post: Oct. 3 2005, 19:11 ET)
Replacement?
Contender pin block  (Started: Sep. 27 2005, 22:28 ET, Last post: Oct. 3 2005, 19:07 ET)
Springfield mil-spec champion questions  (Started: Oct. 2 2005, 12:01 ET, Last post: Oct. 2 2005, 12:01 ET)
General questions
Stainless steel  (Started: Sep. 27 2005, 04:58 ET, Last post: Sep. 30 2005, 13:11 ET)
Mod. 70 bolt  (Started: Sep. 29 2005, 20:34 ET, Last post: Sep. 30 2005, 09:08 ET)
Grinding a broach  (Started: Sep. 22 2005, 15:47 ET, Last post: Sep. 30 2005, 04:21 ET)
Rounding the teeth of a square broach
Remington 742...  (Started: Sep. 28 2005, 18:31 ET, Last post: Sep. 28 2005, 18:31 ET)
Bolt latch toggle...
Browning m1922  (Started: Sep. 28 2005, 08:55 ET, Last post: Sep. 28 2005, 08:55 ET)
How do i polish the slide rails?
Red dot repair  (Started: Sep. 26 2005, 22:24 ET, Last post: Sep. 26 2005, 23:57 ET)
Replacing front sight on m95?  (Started: Sep. 22 2005, 15:25 ET, Last post: Sep. 23 2005, 00:02 ET)
Yugo 59/66 - need help!!  (Started: Aug. 11 2005, 21:18 ET, Last post: Sep. 22 2005, 11:41 ET)
Legality issues
Sten smg has feeding ramp?  (Started: Sep. 12 2005, 17:53 ET, Last post: Sep. 22 2005, 11:38 ET)
Return spring calculations advice?  (Started: Sep. 19 2005, 11:58 ET, Last post: Sep. 20 2005, 20:11 ET)
Return spring calculations advice?
Unusual set trigger  (Started: Sep. 17 2005, 21:48 ET, Last post: Sep. 19 2005, 20:52 ET)
Need one
Krink compensator  (Started: Sep. 16 2005, 09:52 ET, Last post: Sep. 18 2005, 21:22 ET)
Ports?
Reamer price seams a little high  (Started: Sep. 6 2005, 11:42 ET, Last post: Sep. 16 2005, 19:20 ET)
Reamer price list.
Help in Identifying 1911 Bbl & Bushing...  (Started: Feb. 18 2003, 22:23 ET, Last post: Sep. 16 2005, 03:20 ET)
Brazing ribs.  (Started: Sep. 12 2005, 20:19 ET, Last post: Sep. 15 2005, 18:03 ET)
How to?
Big change, help!!  (Started: Aug. 13 2005, 17:46 ET, Last post: Sep. 13 2005, 11:25 ET)
Career switch
Sten magazine dimensions  (Started: Sep. 12 2005, 17:47 ET, Last post: Sep. 12 2005, 21:00 ET)
Installing a timney trigger in win 70  (Started: Sep. 12 2005, 08:59 ET, Last post: Sep. 12 2005, 15:51 ET)
Doesn't fit right
Barrel length  (Started: Sep. 6 2005, 23:26 ET, Last post: Sep. 10 2005, 10:43 ET)
Retention plate or fire pin retainer?  (Started: Sep. 8 2005, 16:57 ET, Last post: Sep. 8 2005, 21:56 ET)
For pistols with fire pin block
A2 heat treat question  (Started: Sep. 6 2005, 23:15 ET, Last post: Sep. 7 2005, 19:47 ET)
How hard should my reciver be?
Info on vg-1-5 volkssturm rifle?  (Started: Feb. 1 2005, 11:57 ET, Last post: Sep. 7 2005, 17:17 ET)
Polish inside frame  (Started: Aug. 29 2005, 03:05 ET, Last post: Sep. 7 2005, 07:35 ET)
Off the wall welder question  (Started: Aug. 21 2005, 14:40 ET, Last post: Sep. 6 2005, 19:47 ET)
Magazine lengthening on a 1909 arg. mauser  (Started: Sep. 2 2005, 01:31 ET, Last post: Sep. 6 2005, 14:50 ET)
Uzi barrel dimensions  (Started: Sep. 4 2005, 11:51 ET, Last post: Sep. 6 2005, 09:10 ET)
Off angle buffer tube on 80%ar  (Started: Aug. 28 2005, 03:11 ET, Last post: Sep. 5 2005, 10:34 ET)
Messed this up, how to fix?
Aluminum ar15 bolt carrier?  (Started: Sep. 3 2005, 09:37 ET, Last post: Sep. 5 2005, 04:07 ET)
Winchester 69a barrerl removal  (Started: Aug. 30 2005, 22:26 ET, Last post: Sep. 3 2005, 23:24 ET)
Cerrosafe question  (Started: Sep. 2 2005, 09:44 ET, Last post: Sep. 3 2005, 01:12 ET)
Chambering .22 l.r.  (Started: Aug. 26 2005, 17:33 ET, Last post: Sep. 2 2005, 16:16 ET)
Using twist drills ?
Kt 1911  (Started: Sep. 2 2005, 14:02 ET, Last post: Sep. 2 2005, 15:31 ET)
Project questions
Drill bits needed to complete ar15 80%  (Started: Jul. 30 2005, 02:23 ET, Last post: Sep. 2 2005, 00:59 ET)
Reaming vs. 1 1/8" end mill?????????????
Safe and barrel attachment  (Started: Aug. 31 2005, 17:18 ET, Last post: Sep. 1 2005, 23:37 ET)
Remove sig p228 / dlask sights from the slide  (Started: Aug. 29 2005, 20:52 ET, Last post: Aug. 29 2005, 23:22 ET)
Cobray skorpion ???  (Started: Aug. 29 2005, 01:03 ET, Last post: Aug. 29 2005, 19:54 ET)
Colt cylinder chamfer  (Started: Aug. 22 2005, 15:20 ET, Last post: Aug. 29 2005, 07:11 ET)
Gazzer  (Started: Aug. 26 2005, 07:48 ET, Last post: Aug. 28 2005, 10:07 ET)
Franchi semi auto shotgun parts
Rifle reciever building 101  (Started: Aug. 27 2005, 16:38 ET, Last post: Aug. 28 2005, 00:44 ET)
How do/would you, this will make u think
Fire damage to a rifle  (Started: Jul. 28 2005, 23:19 ET, Last post: Aug. 27 2005, 18:28 ET)
What can be done with the receiver?
Sig p228  (Started: Aug. 24 2005, 10:40 ET, Last post: Aug. 26 2005, 04:26 ET)
P228 parts kit
Marlin 120 magnum  (Started: Aug. 25 2005, 17:14 ET, Last post: Aug. 25 2005, 17:24 ET)
Stock bolt problem
P228/229 part interchangability  (Started: Aug. 25 2005, 10:06 ET, Last post: Aug. 25 2005, 11:31 ET)
Which parts will fit both
Jaco designs  pistol ?  (Started: Apr. 9 2005, 03:53 ET, Last post: Aug. 24 2005, 20:52 ET)
Broke another pistol  (Started: Jul. 26 2005, 16:54 ET, Last post: Aug. 24 2005, 16:23 ET)
To much stress on the firearm
Plug a ar15 bbl gas port?  (Started: Aug. 5 2005, 10:13 ET, Last post: Aug. 22 2005, 07:26 ET)
.22 mauser  (Started: Aug. 20 2005, 20:55 ET, Last post: Aug. 22 2005, 01:55 ET)
Where can i find ammo?
Swedish mauser conversion  (Started: Aug. 15 2005, 15:37 ET, Last post: Aug. 21 2005, 19:52 ET)
What cartridges are safe?
Civilian mauser caliber id?  (Started: Jul. 28 2005, 23:43 ET, Last post: Aug. 21 2005, 15:54 ET)
Caliber unknown
Chamber reaming help?  (Started: Aug. 17 2005, 14:06 ET, Last post: Aug. 21 2005, 14:55 ET)
Need guidance......
Removing plunger tube and ejector from 1911?  (Started: Aug. 19 2005, 21:32 ET, Last post: Aug. 21 2005, 14:51 ET)
Mod. 70 barrel  (Started: Aug. 19 2005, 23:47 ET, Last post: Aug. 21 2005, 11:39 ET)
It's a snap  (Started: Aug. 12 2005, 18:15 ET, Last post: Aug. 20 2005, 23:35 ET)
Value of snap caps
Ed's red  (Started: Jun. 9 2005, 16:46 ET, Last post: Aug. 19 2005, 12:16 ET)
Preparing mild steel for nickel plating  (Started: Aug. 18 2005, 23:04 ET, Last post: Aug. 19 2005, 10:03 ET)
Win.mod50 12 gauge double shoots  (Started: Aug. 18 2005, 10:29 ET, Last post: Aug. 18 2005, 17:47 ET)
Inquiry for help
Converting older winchester model 12  (Started: Aug. 8 2005, 11:28 ET, Last post: Aug. 17 2005, 16:45 ET)
Lengthening 2 9/16 chambers on model 12
Big mistake!  (Started: Aug. 12 2005, 14:23 ET, Last post: Aug. 17 2005, 09:20 ET)
Which first build??  (Started: Aug. 11 2005, 07:01 ET, Last post: Aug. 15 2005, 14:20 ET)
Winchest 97 with barrel bulge  (Started: Aug. 8 2005, 16:50 ET, Last post: Aug. 14 2005, 16:11 ET)
To cut off or swage or ?
Mossberg 800 barrel replacement  (Started: Aug. 13 2005, 14:20 ET, Last post: Aug. 13 2005, 15:19 ET)
Swap with oem barrel
Where to buy/download uzi smg blueprints ?  (Started: Aug. 12 2005, 13:44 ET, Last post: Aug. 12 2005, 19:06 ET)
Slide metal stock  (Started: Aug. 10 2005, 15:32 ET, Last post: Aug. 11 2005, 00:21 ET)
Metal choices for a 9mm slide
Help please  (Started: Aug. 9 2005, 18:11 ET, Last post: Aug. 9 2005, 18:11 ET)
Soldering question - poly choke install  (Started: Aug. 6 2005, 08:12 ET, Last post: Aug. 9 2005, 15:14 ET)
.17m2 bbl blanks  (Started: Aug. 3 2005, 11:04 ET, Last post: Aug. 9 2005, 10:07 ET)
New idea!
Trouble with taurus  (Started: Aug. 6 2005, 23:22 ET, Last post: Aug. 8 2005, 11:10 ET)
Need help headspacing a hk-91 kit gun  (Started: Aug. 3 2005, 00:03 ET, Last post: Aug. 6 2005, 22:57 ET)
Prexis semi-auto sten receivers  (Started: Jun. 12 2005, 14:50 ET, Last post: Aug. 6 2005, 22:35 ET)
Anyone ever used one?
Nickel / boron plate a pistol barrel Ė good idea?  (Started: Aug. 5 2005, 02:50 ET, Last post: Aug. 6 2005, 12:06 ET)
Springfield long slide holster???  (Started: Aug. 5 2005, 17:00 ET, Last post: Aug. 5 2005, 17:00 ET)
6" barrel fully cover...
Can this be done safely?  (Started: Aug. 4 2005, 23:59 ET, Last post: Aug. 5 2005, 16:12 ET)
Add 4" barrel & slide on a colt defender
Walther pp .32 to .380 conversion?  (Started: Aug. 4 2005, 12:02 ET, Last post: Aug. 5 2005, 14:48 ET)
Can tungsten be cut with a plasma cutter?  (Started: Aug. 4 2005, 18:55 ET, Last post: Aug. 5 2005, 10:19 ET)
Cert. welding guru needed
Supplies?  (Started: Aug. 1 2005, 23:27 ET, Last post: Aug. 5 2005, 03:00 ET)
What should i order...
1911 80% frame from tannery  (Started: Jul. 30 2005, 02:05 ET, Last post: Aug. 4 2005, 19:37 ET)
What needs to be done?
45/410 choke?  (Started: Aug. 3 2005, 22:49 ET, Last post: Aug. 3 2005, 23:37 ET)
Any ideas?
Rifle caliber change  (Started: Jul. 30 2005, 21:40 ET, Last post: Aug. 1 2005, 17:57 ET)
Receiver stress test?  (Started: Jul. 27 2005, 08:52 ET, Last post: Jul. 31 2005, 21:05 ET)
1911 80% frame from tannery  (Started: Jul. 30 2005, 02:05 ET, Last post: Jul. 30 2005, 10:59 ET)
What needs to be done?
Inexpensive, readily availible fcg?  (Started: Jul. 26 2005, 20:44 ET, Last post: Jul. 29 2005, 03:55 ET)
Winchester 70 sporter bbl on mauser  (Started: Jul. 25 2005, 19:04 ET, Last post: Jul. 28 2005, 11:39 ET)
Can the threaded section be cutoff?
Scope base screw thread  (Started: Jul. 28 2005, 01:38 ET, Last post: Jul. 28 2005, 07:19 ET)
Screw threads flat one side
Securing barrel liner  (Started: Jul. 20 2005, 17:22 ET, Last post: Jul. 27 2005, 22:54 ET)
Epoxy ?
Polish out tool marks  (Started: Jul. 26 2005, 12:41 ET, Last post: Jul. 27 2005, 11:05 ET)
Win 94 headspace problem  (Started: Jul. 26 2005, 18:40 ET, Last post: Jul. 26 2005, 22:30 ET)
Shortening a ruger sbh barrel  (Started: Jul. 26 2005, 12:19 ET, Last post: Jul. 26 2005, 12:41 ET)
Protect an unfinished steel frames  (Started: Jul. 23 2005, 00:20 ET, Last post: Jul. 25 2005, 16:15 ET)
Mp5 barrel dimensions?  (Started: Jul. 24 2005, 06:21 ET, Last post: Jul. 24 2005, 06:21 ET)
Bueller? bueller?
Springfield xd trigger  (Started: Jul. 23 2005, 13:44 ET, Last post: Jul. 23 2005, 13:44 ET)
Picatinny rail  (Started: Jul. 19 2005, 23:51 ET, Last post: Jul. 21 2005, 23:29 ET)
Power custom series i stoning fixture...  (Started: Jul. 19 2005, 01:10 ET, Last post: Jul. 21 2005, 13:08 ET)
Understanding the features...
Stippling  (Started: Jul. 16 2005, 01:56 ET, Last post: Jul. 20 2005, 15:44 ET)
Stippling vs checkering
Gouge slipstones  (Started: Jul. 15 2005, 17:17 ET, Last post: Jul. 19 2005, 15:40 ET)
Bottom Barrel Lug Fitting  (Started: Sep. 1 2001, 01:46 ET, Last post: Jul. 19 2005, 15:36 ET)
Technique
Largest most powerful blowback semi auto  (Started: Jul. 12 2005, 11:04 ET, Last post: Jul. 18 2005, 16:38 ET)
Browning fn1922 pistol  (Started: Jul. 18 2005, 07:21 ET, Last post: Jul. 18 2005, 12:15 ET)
Refinnishing
Ak lower rails hardening  (Started: Jul. 16 2005, 04:21 ET, Last post: Jul. 18 2005, 04:26 ET)
Remington 700 222  (Started: Jul. 17 2005, 11:01 ET, Last post: Jul. 17 2005, 11:01 ET)
Question on cartridge champering  (Started: Jul. 15 2005, 20:41 ET, Last post: Jul. 16 2005, 02:16 ET)
Thermometer  (Started: Jul. 10 2005, 11:46 ET, Last post: Jul. 15 2005, 11:04 ET)
Anyone use one of these?
Chemical engineer in the house?  (Started: May 30 2005, 12:13 ET, Last post: Jul. 15 2005, 07:12 ET)
Help with marlin  (Started: Jul. 7 2005, 12:40 ET, Last post: Jul. 15 2005, 04:36 ET)
45 camp carbine
Tight slide on sig 226  (Started: Jul. 6 2005, 20:01 ET, Last post: Jul. 12 2005, 03:07 ET)
Tight slide on sig 226
Question; best way to improve 9422 trigger  (Started: Jul. 7 2005, 15:49 ET, Last post: Jul. 11 2005, 19:27 ET)
9422 trigger work
I need a mossberg 183 .410 shot gun bolt  (Started: Jul. 7 2005, 18:14 ET, Last post: Jul. 11 2005, 14:42 ET)
Smith barrel thread  (Started: Jul. 9 2005, 20:59 ET, Last post: Jul. 10 2005, 22:37 ET)
Ruger model 77 mark 2 fireing pin parts  (Started: Jul. 8 2005, 12:33 ET, Last post: Jul. 8 2005, 12:33 ET)
Ar barrel contour  (Started: Jul. 5 2005, 09:23 ET, Last post: Jul. 7 2005, 17:08 ET)
amt automag iii and iv  (Started: Aug. 15 2004, 08:48 ET, Last post: Jul. 7 2005, 00:50 ET)
same frame?
Colt slide metal  (Started: Jul. 6 2005, 22:51 ET, Last post: Jul. 6 2005, 22:51 ET)
9mm barrel blank source - help!  (Started: Jun. 30 2005, 12:11 ET, Last post: Jul. 5 2005, 22:06 ET)
Hbar upper for shorty ar = <$ than 308  (Started: Jul. 3 2005, 21:34 ET, Last post: Jul. 5 2005, 07:33 ET)
What milling machine for 0% 1911, ar lowers?  (Started: Jun. 24 2005, 17:33 ET, Last post: Jul. 5 2005, 06:53 ET)
Stevens barrel  (Started: Apr. 1 2005, 04:00 ET, Last post: Jul. 4 2005, 17:31 ET)
Wtb
Smg 31 converting part ii  (Started: Jul. 4 2005, 13:49 ET, Last post: Jul. 4 2005, 13:51 ET)
50 cal. b.m.g. firing pin protrusion?  (Started: Jul. 4 2005, 00:16 ET, Last post: Jul. 4 2005, 10:55 ET)
Working ivory  (Started: Jun. 30 2005, 19:24 ET, Last post: Jul. 3 2005, 20:22 ET)
Building my first gun on a budget w/ patence  (Started: Jun. 30 2005, 03:22 ET, Last post: Jul. 1 2005, 18:37 ET)
Like to replace parts little at a time
Milling an 80% question  (Started: Jun. 24 2005, 19:24 ET, Last post: Jul. 1 2005, 11:27 ET)
Pistol frame  (Started: Jun. 25 2005, 13:43 ET, Last post: Jul. 1 2005, 02:58 ET)
How would you repair flame cutting
Loaded chamber indicator  (Started: Jul. 1 2005, 00:19 ET, Last post: Jul. 1 2005, 00:19 ET)
Pin that indicates when it's loaded
Browning fn m1922 pistol  (Started: Jun. 27 2005, 09:58 ET, Last post: Jun. 30 2005, 12:12 ET)
Restoring fn m1922 pistol
Savage 940e assembly  (Started: Jun. 25 2005, 14:19 ET, Last post: Jun. 29 2005, 22:42 ET)
Win. model 50 loose stock  (Started: Jun. 29 2005, 16:52 ET, Last post: Jun. 29 2005, 16:52 ET)
How do you tighten stock bolt?
Fixed stock mac 11/9  (Started: Jun. 29 2005, 16:49 ET, Last post: Jun. 29 2005, 16:49 ET)
Looking for a stock for my rifle
.50 - machine requirements  (Started: Jun. 29 2005, 08:54 ET, Last post: Jun. 29 2005, 08:54 ET)
Do i have what i need?
Scope base adjustment  (Started: Jun. 19 2005, 20:10 ET, Last post: Jun. 27 2005, 12:22 ET)
Rifle shhots low with scope max'd out
Weatherby mark v trigger  (Started: Jun. 27 2005, 10:57 ET, Last post: Jun. 27 2005, 10:57 ET)
Bore specs for .223 barrel  (Started: Jun. 25 2005, 12:00 ET, Last post: Jun. 26 2005, 11:44 ET)
Can't search... i'll just ask
Cz 527 spec.  (Started: Jun. 26 2005, 01:10 ET, Last post: Jun. 26 2005, 01:10 ET)
Barrel shank & thread size
Park'ing different alloys  (Started: Jun. 16 2005, 17:16 ET, Last post: Jun. 24 2005, 19:11 ET)
Need help rebarreling a low wall  (Started: Jun. 17 2005, 13:36 ET, Last post: Jun. 23 2005, 23:28 ET)
Steel rails  (Started: Jun. 19 2005, 22:34 ET, Last post: Jun. 22 2005, 14:39 ET)
.22 barrel removal  (Started: Jun. 19 2005, 22:49 ET, Last post: Jun. 22 2005, 04:05 ET)
Barreling a 1903a3?  (Started: Jun. 20 2005, 17:06 ET, Last post: Jun. 21 2005, 14:30 ET)
Gmail/jaco design pistol  (Started: Jun. 6 2005, 16:47 ET, Last post: Jun. 20 2005, 19:15 ET)
1898 krag87  (Started: Jun. 10 2005, 15:43 ET, Last post: Jun. 13 2005, 09:45 ET)
Feeding problem
Rifle conversion  (Started: Jun. 10 2005, 14:05 ET, Last post: Jun. 13 2005, 09:25 ET)
.22 long rifle to .17 cal. machii
Savage trigger  (Started: Jun. 11 2005, 00:19 ET, Last post: Jun. 12 2005, 14:06 ET)
Reassembly
Ruger P89?  (Started: Sep. 21 2004, 19:35 ET, Last post: Jun. 10 2005, 01:06 ET)
Firing pin/safety
Essex recievers  (Started: Jun. 3 2005, 21:09 ET, Last post: Jun. 9 2005, 20:45 ET)
Quick question
Charles daly mini mauser action  (Started: May 29 2005, 11:37 ET, Last post: Jun. 8 2005, 16:45 ET)
Barrel threading
Adhesives in gunsmithing  (Started: May 19 2005, 06:12 ET, Last post: Jun. 8 2005, 16:36 ET)
How are adhesives used in firearms?
Commander plug battering  (Started: Jun. 2 2005, 04:42 ET, Last post: Jun. 8 2005, 09:58 ET)
Where'd the m11/9 buildup go?
First build  (Started: May 31 2005, 02:16 ET, Last post: Jun. 7 2005, 14:33 ET)
Advice please
7.62x25 conversions for 9mm carbines  (Started: May 28 2005, 12:18 ET, Last post: Jun. 7 2005, 14:31 ET)
I wonder what would be involved
Trigger pull weights  (Started: Jun. 5 2005, 23:43 ET, Last post: Jun. 7 2005, 05:10 ET)
Home gunsmithing tools  (Started: Jun. 5 2005, 15:52 ET, Last post: Jun. 7 2005, 03:08 ET)
What do i need?
Mini-14  (Started: Jun. 6 2005, 11:06 ET, Last post: Jun. 6 2005, 13:57 ET)
80% frames
Ruger mini-14  (Started: Jun. 5 2005, 05:49 ET, Last post: Jun. 5 2005, 19:54 ET)
Accurizing?
Installing rear and front lugs  (Started: May 19 2005, 23:18 ET, Last post: Jun. 3 2005, 17:53 ET)
Need a book recomendation - something that  (Started: Jun. 1 2005, 18:08 ET, Last post: Jun. 1 2005, 18:08 ET)
Covers weaver & other side scope mounts
Need the use of a .45-70 reamer  (Started: May 28 2005, 01:27 ET, Last post: May 31 2005, 16:56 ET)
For an old rolling block
Barrels  (Started: May 31 2005, 02:00 ET, Last post: May 31 2005, 15:21 ET)
Sandblasting for dummies  (Started: May 23 2005, 18:55 ET, Last post: May 30 2005, 11:54 ET)
What media do you use to sandblast
5.7x28 barrel questions  (Started: May 29 2005, 01:07 ET, Last post: May 29 2005, 07:03 ET)
Home park how to q's  (Started: May 26 2005, 13:39 ET, Last post: May 28 2005, 19:46 ET)
Barrel issues
Welding 4140  (Started: May 16 2005, 16:52 ET, Last post: May 28 2005, 19:36 ET)
Springfield long slide feeding problem  (Started: May 27 2005, 14:05 ET, Last post: May 28 2005, 00:43 ET)
Cartridge won't load into chamber
Ak conversion  (Started: May 26 2005, 09:42 ET, Last post: May 27 2005, 16:07 ET)
Cutting and shaping micarta  (Started: May 20 2005, 22:50 ET, Last post: May 26 2005, 22:27 ET)
Royce?
1911  (Started: May 25 2005, 23:42 ET, Last post: May 25 2005, 23:42 ET)
Powell settings
Barrel/receiver question  (Started: May 22 2005, 20:24 ET, Last post: May 25 2005, 07:30 ET)
10/22 bolt plans/blueprints  (Started: May 24 2005, 22:14 ET, Last post: May 24 2005, 22:14 ET)
Not a receiver blueprint, but...
I'm scared!!  (Started: May 19 2005, 20:09 ET, Last post: May 23 2005, 23:20 ET)
Heeeeeeeeelp
Barrels & full-auto fire  (Started: May 21 2005, 00:12 ET, Last post: May 23 2005, 15:29 ET)
How do barrels react to full-auto fire?
6.5x55 swede twist rate...?  (Started: May 11 2005, 09:19 ET, Last post: May 23 2005, 05:32 ET)
Need help with the options?
1911 extractor question  (Started: May 20 2005, 15:33 ET, Last post: May 21 2005, 12:21 ET)
Which is better?
I need a gubmint trained knife guru, i have ??  (Started: May 19 2005, 19:52 ET, Last post: May 19 2005, 21:02 ET)
Wtk: paracord wrapping techniques
To export firearms  (Started: May 19 2005, 20:49 ET, Last post: May 19 2005, 20:49 ET)
Please help me id this manufacturer  (Started: May 18 2005, 18:01 ET, Last post: May 19 2005, 18:33 ET)
Old shotgun
Walther barrels  (Started: May 8 2005, 08:28 ET, Last post: May 19 2005, 16:29 ET)
I need ar10 upper & bolt carrier dimensions  (Started: May 18 2005, 14:01 ET, Last post: May 19 2005, 13:23 ET)
Diameter through upper & od of carrier
Ar 10 barrel profiles  (Started: May 16 2005, 17:06 ET, Last post: May 19 2005, 10:42 ET)
Fire damaged rifle  (Started: May 12 2005, 20:35 ET, Last post: May 18 2005, 13:45 ET)
1911 parts kit  (Started: May 17 2005, 14:53 ET, Last post: May 17 2005, 14:53 ET)
Mac-12 .380  mag latch ?  (Started: May 17 2005, 07:48 ET, Last post: May 17 2005, 14:19 ET)
Colt navy spring  (Started: May 16 2005, 09:40 ET, Last post: May 17 2005, 12:36 ET)
1911 build  (Started: May 15 2005, 11:59 ET, Last post: May 17 2005, 01:48 ET)
Essex frame and sarco internals
Stock stabilization  (Started: May 5 2005, 09:34 ET, Last post: May 16 2005, 16:00 ET)
Charles daly mini-mauser actions  (Started: Nov. 27 2004, 12:07 ET, Last post: May 16 2005, 15:24 ET)
Anyone built on one yet?
Colt barrel  (Started: May 12 2005, 15:05 ET, Last post: May 16 2005, 12:17 ET)
Change barrel
Marlin model 1881  (Started: May 14 2005, 15:49 ET, Last post: May 16 2005, 10:04 ET)
Worn trigger and hammer
High standard model b wont cycle  (Started: May 13 2005, 00:00 ET, Last post: May 15 2005, 00:37 ET)
Parts diagram  (Started: May 12 2005, 17:58 ET, Last post: May 14 2005, 07:40 ET)
Smith m638 bodyguard
What is a wildcat cartridge?  (Started: May 13 2005, 16:30 ET, Last post: May 13 2005, 22:40 ET)
Anyone ever made an adjustable peep sight?  (Started: May 8 2005, 10:21 ET, Last post: May 12 2005, 10:00 ET)
1911 series?  (Started: May 11 2005, 17:39 ET, Last post: May 11 2005, 18:20 ET)
Timney adjustment  (Started: May 9 2005, 15:00 ET, Last post: May 11 2005, 15:52 ET)
Gun dry fires when safety is disengaged
Rossi 22/410 receiver assembly pins  (Started: May 10 2005, 20:38 ET, Last post: May 10 2005, 21:47 ET)
Ackley improved fireforming  (Started: May 8 2005, 08:10 ET, Last post: May 9 2005, 08:21 ET)
Bore indicator rods  (Started: May 7 2005, 09:02 ET, Last post: May 8 2005, 16:14 ET)
Where to purchase
Anyone know about the 'ranger sling' ?  (Started: Apr. 20 2005, 07:14 ET, Last post: May 8 2005, 15:46 ET)
Need dimensions for win. 94 front sight  (Started: May 8 2005, 10:04 ET, Last post: May 8 2005, 10:04 ET)
How much space between parts?  (Started: May 1 2005, 17:10 ET, Last post: May 7 2005, 02:49 ET)
Mauser broomhandle  (Started: May 4 2005, 20:00 ET, Last post: May 5 2005, 10:41 ET)
Serial number question
How about an ar-15 bolt build?  (Started: May 1 2005, 22:02 ET, Last post: May 3 2005, 23:53 ET)
Dulling stainless steel  (Started: May 1 2005, 13:34 ET, Last post: May 3 2005, 13:11 ET)
Cast or forged?  (Started: Apr. 29 2005, 02:04 ET, Last post: May 1 2005, 21:24 ET)
Taurus raging 30  (Started: Apr. 24 2005, 00:25 ET, Last post: May 1 2005, 02:04 ET)
Yoke removal
Yugo sks with grenade launcher  (Started: Apr. 28 2005, 20:13 ET, Last post: Apr. 29 2005, 17:02 ET)
Gas cylinder shut-off switch
Legal suppressor build  (Started: Apr. 29 2005, 09:51 ET, Last post: Apr. 29 2005, 13:47 ET)
Ar15  (Started: Apr. 28 2005, 20:51 ET, Last post: Apr. 29 2005, 07:25 ET)
Front sight
.17  (Started: Apr. 28 2005, 01:50 ET, Last post: Apr. 29 2005, 00:17 ET)
.17
.357 herrett bolt action?  (Started: Apr. 23 2005, 00:32 ET, Last post: Apr. 28 2005, 21:42 ET)
Need some thoughts...advice...
High standard sportking  (Started: Apr. 28 2005, 17:42 ET, Last post: Apr. 28 2005, 21:40 ET)
Failure to cock on third shot
Accurizing a Remington 700  (Started: Sep. 27 2004, 19:36 ET, Last post: Apr. 28 2005, 19:46 ET)
Gun cleaning  (Started: Mar. 8 2005, 21:11 ET, Last post: Apr. 28 2005, 18:45 ET)
Did i damage the muzzle?
Info ; needed  (Started: Apr. 27 2005, 19:15 ET, Last post: Apr. 28 2005, 11:19 ET)
Colored aluminum anodizing
308 feeding problem  (Started: Apr. 26 2005, 14:23 ET, Last post: Apr. 28 2005, 02:23 ET)
Need help with follower/action by friday
Chambering depth help--first timer!!  (Started: Apr. 26 2005, 18:28 ET, Last post: Apr. 27 2005, 18:07 ET)
Rechambering
Colt sauer barrel threads  (Started: Apr. 26 2005, 10:41 ET, Last post: Apr. 26 2005, 10:41 ET)
What are the threads
Questions......receivers for vz-58  (Started: Apr. 22 2005, 23:45 ET, Last post: Apr. 26 2005, 10:39 ET)
Maddi single stack magazine ak-47
New guy needs help with lapped lugs  (Started: Apr. 23 2005, 20:48 ET, Last post: Apr. 24 2005, 20:00 ET)
Adjustable stock hardware  (Started: Apr. 20 2005, 21:50 ET, Last post: Apr. 24 2005, 18:30 ET)
Need drawings or pics
Old gas torch  (Started: Apr. 17 2005, 12:52 ET, Last post: Apr. 24 2005, 13:15 ET)
Information wanted
Yugo m56 kit  (Started: Apr. 23 2005, 00:46 ET, Last post: Apr. 23 2005, 14:06 ET)
Anyone building a semiauto?
.22 no welder  (Started: Apr. 17 2005, 23:02 ET, Last post: Apr. 22 2005, 21:07 ET)
Solder maybe?
Need epoxy reccommendations....  (Started: Nov. 28 2004, 19:57 ET, Last post: Apr. 21 2005, 20:30 ET)
I've got a huge void to fill in a stock!
Re-barrelling a howa  (Started: Feb. 7 2005, 14:49 ET, Last post: Apr. 21 2005, 16:27 ET)
thinking af changing caliber  (Started: Oct. 10 2004, 14:46 ET, Last post: Apr. 21 2005, 13:22 ET)
what should i pick?
Lee enfield conversion  (Started: Apr. 14 2005, 20:34 ET, Last post: Apr. 21 2005, 03:26 ET)
Converting .303 enfield to .308
1911 colt extractor question  (Started: Apr. 14 2005, 00:04 ET, Last post: Apr. 19 2005, 10:58 ET)
Uberti cattleman conversion  (Started: Apr. 16 2005, 06:40 ET, Last post: Apr. 19 2005, 00:44 ET)
From 44cal cap&ball to 45 long colt
Removing tool marks  (Started: Apr. 15 2005, 16:41 ET, Last post: Apr. 18 2005, 15:29 ET)
1911
Barrel installation.  (Started: Feb. 18 2005, 23:35 ET, Last post: Apr. 18 2005, 12:15 ET)
.308win barrel shank diameter  (Started: Mar. 14 2005, 10:46 ET, Last post: Apr. 18 2005, 12:06 ET)
Safe barrel shank dimensions
1911 80% receiver basic questions  (Started: Apr. 16 2005, 00:59 ET, Last post: Apr. 17 2005, 23:11 ET)
What tools, how hard is it, time, etc.
Miniature flint-locks?  (Started: Apr. 1 2005, 00:36 ET, Last post: Apr. 17 2005, 22:35 ET)
Semi-automatic pistol home design  (Started: Apr. 16 2005, 11:17 ET, Last post: Apr. 16 2005, 19:29 ET)
My first broken tap!!!!!  (Started: Mar. 2 2005, 18:48 ET, Last post: Apr. 16 2005, 02:19 ET)
Single shot 'open-bolt' legality?  (Started: Apr. 7 2005, 03:19 ET, Last post: Apr. 15 2005, 22:20 ET)
Ar gas tube possibilities  (Started: Apr. 6 2005, 20:49 ET, Last post: Apr. 15 2005, 18:02 ET)
Need help figuring id for threading  (Started: Apr. 13 2005, 19:58 ET, Last post: Apr. 15 2005, 07:58 ET)
Hi-point  (Started: Apr. 10 2005, 12:55 ET, Last post: Apr. 13 2005, 22:38 ET)
Question??????  (Started: Apr. 12 2005, 22:25 ET, Last post: Apr. 13 2005, 15:31 ET)
Upper flat  top build
Ffl ? and hello  (Started: Apr. 12 2005, 02:48 ET, Last post: Apr. 13 2005, 14:23 ET)
More than one location
Rebarrelling remington 7600  (Started: Apr. 9 2005, 03:07 ET, Last post: Apr. 12 2005, 08:39 ET)
Other handguns ?  (Started: Mar. 24 2005, 22:32 ET, Last post: Apr. 12 2005, 05:24 ET)
Question on new finish  (Started: Apr. 10 2005, 09:34 ET, Last post: Apr. 11 2005, 13:05 ET)
Fixed firing pin, no firing out of battery??  (Started: Apr. 2 2005, 13:09 ET, Last post: Apr. 11 2005, 04:27 ET)
How does a firearm with a fixed firing..
What the garlic is that?  (Started: Mar. 19 2005, 09:56 ET, Last post: Apr. 9 2005, 23:17 ET)
870?
Fake ak br reflex suppressor  (Started: Apr. 7 2005, 06:57 ET, Last post: Apr. 9 2005, 01:11 ET)
How would you make one?
Welding -braze bryillium  (Started: Apr. 4 2005, 12:47 ET, Last post: Apr. 8 2005, 00:33 ET)
1911 fix
22 bolt help  (Started: Apr. 6 2005, 22:24 ET, Last post: Apr. 7 2005, 05:03 ET)
Deactivating primers  (Started: Mar. 24 2005, 19:49 ET, Last post: Apr. 6 2005, 14:57 ET)
Small pinfire berloque pistols?  (Started: Mar. 31 2005, 01:45 ET, Last post: Apr. 4 2005, 22:19 ET)
Cutting a.17hmr chamber problem.  (Started: Apr. 1 2005, 11:00 ET, Last post: Apr. 4 2005, 09:43 ET)
Mkiia1 drawings  (Started: Apr. 1 2005, 18:25 ET, Last post: Apr. 1 2005, 22:16 ET)
Derringer drawings  (Started: Mar. 30 2005, 11:28 ET, Last post: Apr. 1 2005, 13:56 ET)
Derringer help
Foremost rifle company?  (Started: Mar. 25 2005, 18:14 ET, Last post: Mar. 30 2005, 21:01 ET)
Anyone know anything about them
Left handed ak47  (Started: Mar. 27 2005, 12:40 ET, Last post: Mar. 30 2005, 15:03 ET)
How would you make the bolt carrier/bolt
Drawing temper from hard steel  (Started: Dec. 4 2004, 18:05 ET, Last post: Mar. 30 2005, 13:37 ET)
How can i do this?
Martini extractor  (Started: Mar. 27 2005, 23:50 ET, Last post: Mar. 27 2005, 23:50 ET)
Snapps gunshop rimless extractor
Jeweling how to  (Started: Mar. 24 2005, 16:13 ET, Last post: Mar. 27 2005, 21:06 ET)
Help! i put my semi auto back together wrong  (Started: Mar. 27 2005, 17:48 ET, Last post: Mar. 27 2005, 18:46 ET)
Savage model 87j  (Started: Mar. 26 2005, 13:46 ET, Last post: Mar. 27 2005, 10:19 ET)
Gunsmithing
Testing rifle for first time w/blanks?  (Started: Feb. 27 2005, 15:01 ET, Last post: Mar. 26 2005, 13:38 ET)
Weekend or 2 week gunsmith schools  (Started: Mar. 17 2005, 00:01 ET, Last post: Mar. 25 2005, 23:54 ET)
Gunsmith schools
Gunsmithing courses  (Started: Feb. 14 2005, 16:03 ET, Last post: Mar. 25 2005, 10:43 ET)
Questions about barrels  (Started: Mar. 24 2005, 23:26 ET, Last post: Mar. 25 2005, 08:19 ET)
Project work
What have i done?  (Started: Mar. 25 2005, 02:10 ET, Last post: Mar. 25 2005, 08:10 ET)
Can i uuse jbweld to fix a stock  (Started: Mar. 23 2005, 17:23 ET, Last post: Mar. 23 2005, 18:48 ET)
Convert glock mags to hi-cap?  (Started: Mar. 21 2005, 19:44 ET, Last post: Mar. 23 2005, 09:43 ET)
Shotgun law?  (Started: Mar. 19 2005, 18:19 ET, Last post: Mar. 22 2005, 22:43 ET)
Remind me how it works please
870 factory mag extension  (Started: Mar. 22 2005, 20:40 ET, Last post: Mar. 22 2005, 20:40 ET)
Need help with a repair
Sporterize mosin nagant?  (Started: Mar. 18 2005, 00:27 ET, Last post: Mar. 22 2005, 05:37 ET)
Need red-dot sight suitable for hunting  (Started: Mar. 21 2005, 11:23 ET, Last post: Mar. 21 2005, 18:17 ET)
(animals not people)
High power pistol question  (Started: Mar. 15 2005, 23:21 ET, Last post: Mar. 21 2005, 13:57 ET)
Post-war fn mauser action  (Started: Mar. 17 2005, 18:25 ET, Last post: Mar. 20 2005, 23:15 ET)
Are these good?
Firearm transfer  (Started: Mar. 18 2005, 16:17 ET, Last post: Mar. 20 2005, 22:42 ET)
How is it done?
1911 grip safety question  (Started: Mar. 19 2005, 17:35 ET, Last post: Mar. 19 2005, 17:35 ET)
Why isn't my gs working right?
Sig 226 in 40 won't feed  (Started: Mar. 18 2005, 23:42 ET, Last post: Mar. 19 2005, 17:19 ET)
Handgun not working
Semi-auto .22 rimfire  (Started: Mar. 16 2005, 20:09 ET, Last post: Mar. 18 2005, 21:22 ET)
I wonder if i could get away with this
Henry hammer clearance  (Started: Mar. 16 2005, 23:50 ET, Last post: Mar. 17 2005, 11:21 ET)
Bending hammer for more clearance
Lost cause??  (Started: Mar. 14 2005, 12:31 ET, Last post: Mar. 17 2005, 08:32 ET)
Drilled into chamber
Ar bolt/carrier  (Started: Mar. 15 2005, 22:06 ET, Last post: Mar. 16 2005, 14:08 ET)
6.8mm bolt size
Mac-11 with sten mags  (Started: Mar. 14 2005, 21:11 ET, Last post: Mar. 16 2005, 12:33 ET)
Kimber of oregon model 82 bolt  (Started: Mar. 13 2005, 01:24 ET, Last post: Mar. 16 2005, 04:14 ET)
Bolt ar problem  (Started: Mar. 15 2005, 09:13 ET, Last post: Mar. 15 2005, 16:41 ET)
Cz-52 pistol  (Started: Mar. 10 2005, 22:13 ET, Last post: Mar. 14 2005, 17:14 ET)
9mm drop-in barrel
How would this work?  (Started: Mar. 11 2005, 21:36 ET, Last post: Mar. 13 2005, 13:57 ET)
Legal question
Ak74 bolt in 47 carrier?  (Started: Mar. 11 2005, 16:26 ET, Last post: Mar. 12 2005, 12:00 ET)
Ever hear of a s&w light rifle mk1 and mk2?  (Started: Mar. 9 2005, 21:03 ET, Last post: Mar. 10 2005, 23:59 ET)
Legality  (Started: Mar. 10 2005, 15:21 ET, Last post: Mar. 10 2005, 22:34 ET)
Is this legal?
Smt price? rifled smt?  (Started: Mar. 7 2005, 05:42 ET, Last post: Mar. 10 2005, 08:08 ET)
Seamless mechanical tube
Remmington 870 with random poi using dot sight  (Started: Mar. 8 2005, 14:56 ET, Last post: Mar. 10 2005, 07:31 ET)
Is the barrel moving?
Semi auto cb striker fired mac?  (Started: Mar. 9 2005, 19:12 ET, Last post: Mar. 9 2005, 19:12 ET)
Did anyone make one ever?
My trigger pin walked out on me...  (Started: Mar. 9 2005, 11:41 ET, Last post: Mar. 9 2005, 15:58 ET)
Beretta tomcat  (Started: Mar. 8 2005, 21:23 ET, Last post: Mar. 8 2005, 21:23 ET)
Takedown and reassembly
Hi po air rifles in uk/usa? long post  (Started: Mar. 6 2005, 12:52 ET, Last post: Mar. 8 2005, 14:49 ET)
"out there" idea..need your help
Rebarrel m1 carbine?  (Started: Mar. 5 2005, 01:51 ET, Last post: Mar. 8 2005, 04:47 ET)
Is there a trick to it?
Can you identify this magazine  (Started: Mar. 5 2005, 22:09 ET, Last post: Mar. 7 2005, 21:50 ET)
30 round .22 cal.
Sks  (Started: Mar. 7 2005, 16:31 ET, Last post: Mar. 7 2005, 17:45 ET)
Magazines
"bizon" blow back w/74 bolt not as easy as it look  (Started: Mar. 6 2005, 20:18 ET, Last post: Mar. 7 2005, 17:08 ET)
Need help from ak guru's....
Mac-11 bolt / receiver width / height?  (Started: Mar. 6 2005, 23:26 ET, Last post: Mar. 6 2005, 23:26 ET)
Fcg pin sizes  (Started: Mar. 3 2005, 19:21 ET, Last post: Mar. 6 2005, 19:55 ET)
New thread to keep it simple
help with sten mk3  (Started: Mar. 9 2004, 13:04 ET, Last post: Mar. 6 2005, 12:06 ET)
What kind of penetration will 9mm fmjfp ammo have?  (Started: Mar. 1 2005, 22:06 ET, Last post: Mar. 5 2005, 16:19 ET)
Cz-52 pistol  (Started: Mar. 2 2005, 22:42 ET, Last post: Mar. 4 2005, 09:19 ET)
Corrosive ammo
Evolving idea....  (Started: Feb. 27 2005, 13:51 ET, Last post: Mar. 4 2005, 04:55 ET)
Curved recoil path?
Spring rate/fcg pins (ak)?  (Started: Mar. 3 2005, 00:28 ET, Last post: Mar. 4 2005, 00:03 ET)
How to calc/determine spring rate?
Dummy gun sten question  (Started: Mar. 2 2005, 02:03 ET, Last post: Mar. 3 2005, 10:10 ET)
So i lucked into a $20 sten kit...
Ak flat w/auto sear hole drilled unbent..ok?  (Started: Feb. 25 2005, 23:33 ET, Last post: Mar. 3 2005, 02:35 ET)
Mac flats  (Started: Feb. 26 2005, 22:44 ET, Last post: Mar. 2 2005, 18:50 ET)
Where have they gone?
Barrel liners  (Started: Feb. 17 2005, 21:05 ET, Last post: Mar. 2 2005, 09:53 ET)
Where can i get barrel liners
Using magazine well as fwd handgrip..ok?  (Started: Feb. 25 2005, 23:49 ET, Last post: Feb. 28 2005, 19:20 ET)
Need some help with a stock  (Started: Feb. 28 2005, 01:39 ET, Last post: Feb. 28 2005, 16:14 ET)
Marlin 336 w/ a bad locking bolt?  (Started: Feb. 28 2005, 09:59 ET, Last post: Feb. 28 2005, 09:59 ET)
Non attached stock ok on aow/pistol?  (Started: Feb. 27 2005, 22:26 ET, Last post: Feb. 28 2005, 01:00 ET)
M16a1 barrel  (Started: Feb. 26 2005, 03:14 ET, Last post: Feb. 27 2005, 23:02 ET)
What is.......
2 1/4" bore muzzle loader: breech questions  (Started: Feb. 26 2005, 11:33 ET, Last post: Feb. 26 2005, 22:37 ET)
Got a nice peice of pipe-any suggestions
Jennings Guns  (Started: Oct. 25 2004, 12:14 ET, Last post: Feb. 26 2005, 21:55 ET)
Anyone ever get a form-1 for an sbr in prk?  (Started: Feb. 26 2005, 14:45 ET, Last post: Feb. 26 2005, 14:45 ET)
Fitting new barrel - thread tolerances?  (Started: Feb. 25 2005, 02:33 ET, Last post: Feb. 26 2005, 12:47 ET)
Closed bolt vs open bolt...real difference?  (Started: Feb. 21 2005, 15:27 ET, Last post: Feb. 26 2005, 06:36 ET)
Mossberg 500  (Started: Feb. 24 2005, 22:15 ET, Last post: Feb. 25 2005, 17:04 ET)
Pain in the butt
Braze brass trigger guard  (Started: Feb. 18 2005, 16:20 ET, Last post: Feb. 24 2005, 13:13 ET)
A question about a llama 380 automatic  (Started: Feb. 23 2005, 12:04 ET, Last post: Feb. 23 2005, 22:43 ET)
Charles daly o/u  (Started: Feb. 23 2005, 17:20 ET, Last post: Feb. 23 2005, 21:20 ET)
Dissassembly
When is a stock a stock? ar-15 pistol....  (Started: Feb. 21 2005, 17:33 ET, Last post: Feb. 23 2005, 16:12 ET)
Making a  firing pin for stevens shotgun  (Started: Jan. 31 2005, 20:26 ET, Last post: Feb. 22 2005, 11:14 ET)
What to use?
Ar15 build..whats important?  (Started: Feb. 18 2005, 16:23 ET, Last post: Feb. 21 2005, 18:37 ET)
Varmint gun accuracy
Chinese tokarev- 9mm to 7,62x25 conversion?  (Started: Feb. 17 2005, 22:00 ET, Last post: Feb. 21 2005, 16:52 ET)
Anyone have any info?
Suppressor ?  (Started: Feb. 12 2005, 17:11 ET, Last post: Feb. 21 2005, 13:09 ET)
A356 ar casting  (Started: Feb. 19 2005, 12:30 ET, Last post: Feb. 20 2005, 23:28 ET)
Some questions
Home built firearms legality?  (Started: Jan. 8 2005, 09:47 ET, Last post: Feb. 20 2005, 13:22 ET)
Power switch for 220 volt welder?  (Started: Feb. 18 2005, 19:18 ET, Last post: Feb. 18 2005, 21:25 ET)
What would work well?
Non-imi uzi pistol ok in cal?  (Started: Feb. 16 2005, 20:51 ET, Last post: Feb. 18 2005, 18:08 ET)
Rem 700 extractor & bedding  (Started: Feb. 3 2005, 12:00 ET, Last post: Feb. 18 2005, 16:57 ET)
How in the......?????
Converting m31 to semiauto  (Started: Feb. 13 2005, 06:25 ET, Last post: Feb. 17 2005, 21:44 ET)
Serial number questions  (Started: Feb. 16 2005, 12:49 ET, Last post: Feb. 17 2005, 16:24 ET)
Testing for obliterated #s?
More legal questions...  (Started: Feb. 16 2005, 04:52 ET, Last post: Feb. 17 2005, 12:27 ET)
Any regulations on blank guns?
Yugo sks  (Started: Feb. 14 2005, 23:21 ET, Last post: Feb. 15 2005, 22:35 ET)
Chrome lined barrel?
Rem. 700 trigger adjustment  (Started: Feb. 13 2005, 13:42 ET, Last post: Feb. 15 2005, 09:20 ET)
Chicopee  (Started: Feb. 14 2005, 01:04 ET, Last post: Feb. 14 2005, 01:04 ET)
Chicopee build
Home hot bluing, parkerizing  (Started: Dec. 8 2004, 18:39 ET, Last post: Feb. 13 2005, 07:45 ET)
Remington 700 bdl .410 slug chucker  (Started: Feb. 12 2005, 06:34 ET, Last post: Feb. 13 2005, 02:34 ET)
Converting from 280 rem to 410 slug
Tapping in drill press?  (Started: Feb. 10 2005, 23:09 ET, Last post: Feb. 12 2005, 15:44 ET)
Where can you get 7.62x39 blanks?  (Started: Feb. 12 2005, 03:09 ET, Last post: Feb. 12 2005, 15:03 ET)
Heat treating mystery steel (from an old drawbar)  (Started: Feb. 10 2005, 09:29 ET, Last post: Feb. 12 2005, 02:34 ET)
How do i do it now?
Bluing tanks  (Started: Feb. 9 2005, 18:19 ET, Last post: Feb. 11 2005, 22:04 ET)
870 slug gun - pinning a hastings barrel  (Started: Feb. 11 2005, 08:46 ET, Last post: Feb. 11 2005, 11:23 ET)
Sten build  (Started: Feb. 7 2005, 20:00 ET, Last post: Feb. 10 2005, 12:51 ET)
Looking into what i need
Ak 47 bolt modification  (Started: Feb. 4 2005, 13:46 ET, Last post: Feb. 10 2005, 10:50 ET)
Ak 47 bolt modification
P-14 actions,   any good??  (Started: Jan. 19 2005, 06:39 ET, Last post: Feb. 9 2005, 18:26 ET)
Curiosity
Uzi/pm-11 hybrid for ca?  (Started: Feb. 8 2005, 11:24 ET, Last post: Feb. 8 2005, 21:16 ET)
Sideplates for lienad derringer  (Started: Jan. 29 2005, 01:10 ET, Last post: Feb. 7 2005, 17:41 ET)
How thick is chrome plating?  (Started: Feb. 4 2005, 03:40 ET, Last post: Feb. 7 2005, 03:19 ET)
Ar-15 stock replacement  (Started: Feb. 6 2005, 14:03 ET, Last post: Feb. 6 2005, 18:15 ET)
Same
M14: auto sear or no?  (Started: Feb. 1 2005, 17:10 ET, Last post: Feb. 6 2005, 01:36 ET)
How to strip blueing/park using acid  (Started: Jan. 31 2005, 10:34 ET, Last post: Feb. 5 2005, 22:23 ET)
Muratic/hydrochloric acid
Leather covered pad  (Started: Jan. 29 2005, 02:21 ET, Last post: Feb. 4 2005, 19:47 ET)
Flash suppressor  (Started: Jan. 29 2005, 15:59 ET, Last post: Feb. 4 2005, 03:02 ET)
Legal now, got design info?
French mas rifle  (Started: Feb. 3 2005, 20:47 ET, Last post: Feb. 3 2005, 23:53 ET)
308 win. conversion
Headspace fal w/small drills?  (Started: Feb. 1 2005, 12:00 ET, Last post: Feb. 2 2005, 21:36 ET)
High pressure 12ga  (Started: Jan. 26 2005, 16:39 ET, Last post: Feb. 2 2005, 13:44 ET)
M1 garand  (Started: Jan. 29 2005, 18:03 ET, Last post: Feb. 2 2005, 13:35 ET)
Help  (Started: Jan. 18 2005, 22:38 ET, Last post: Feb. 2 2005, 12:30 ET)
Headspace question  (Started: Feb. 1 2005, 10:13 ET, Last post: Feb. 2 2005, 12:23 ET)
Pressure question  (Started: Feb. 1 2005, 10:16 ET, Last post: Feb. 2 2005, 09:36 ET)
How deep to drill?  (Started: Jan. 29 2005, 17:25 ET, Last post: Jan. 30 2005, 19:59 ET)
Scout scope mount.
Grips  (Started: Jan. 28 2005, 17:06 ET, Last post: Jan. 28 2005, 23:40 ET)
Removing pachmayers
Whats different about a 'match grade' brl bushi  (Started: Jan. 28 2005, 02:54 ET, Last post: Jan. 28 2005, 20:20 ET)
Trigger assebly for a remington 1100 lt 20 g  (Started: Jan. 27 2005, 18:08 ET, Last post: Jan. 27 2005, 19:40 ET)
What type of metal is it
Mki grip frame interchange uppers?  (Started: Jan. 26 2005, 23:01 ET, Last post: Jan. 27 2005, 17:32 ET)
Welding  (Started: Jan. 25 2005, 14:29 ET, Last post: Jan. 27 2005, 15:39 ET)
M16 carrier  to sp1 specs  (Started: Jan. 27 2005, 08:40 ET, Last post: Jan. 27 2005, 10:33 ET)
How much?
Is my cobray barrel 9mm or 380?  (Started: Jan. 26 2005, 18:26 ET, Last post: Jan. 26 2005, 23:06 ET)
50 BMG chamber dwg.  (Started: Apr. 13 2004, 13:09 ET, Last post: Jan. 26 2005, 22:47 ET)
need headspace dimensions
**reactiveation**  (Started: Jan. 10 2005, 16:29 ET, Last post: Jan. 25 2005, 21:39 ET)
Replica firearms
Ruger super redhawk  (Started: Jan. 23 2005, 23:11 ET, Last post: Jan. 25 2005, 02:36 ET)
Expert opinion  (Started: Jan. 22 2005, 15:49 ET, Last post: Jan. 24 2005, 20:21 ET)
Rebarreling a yugo m48
Savage 110 magazine box  (Started: Jan. 23 2005, 12:33 ET, Last post: Jan. 24 2005, 00:24 ET)
Remove/install
Need help with figuring out bolt weight.  (Started: Jan. 20 2005, 18:51 ET, Last post: Jan. 23 2005, 00:19 ET)
Newer contender schematic  (Started: Jan. 11 2005, 09:33 ET, Last post: Jan. 22 2005, 13:40 ET)
Legal question re: parts count  (Started: Jan. 16 2005, 13:20 ET, Last post: Jan. 21 2005, 18:58 ET)
G3 build
Fal head spacing  (Started: Jan. 19 2005, 16:00 ET, Last post: Jan. 21 2005, 10:42 ET)
? generic side mount scope base moss #42  (Started: Jan. 14 2005, 17:32 ET, Last post: Jan. 19 2005, 20:34 ET)
Description of generic side mount
Amd builder looking for screw list  (Started: Jan. 13 2005, 06:56 ET, Last post: Jan. 19 2005, 00:02 ET)
The receiver rivet replacement screws
Help needed  (Started: Jan. 15 2005, 23:44 ET, Last post: Jan. 17 2005, 12:15 ET)
Family of ak 47's
Removable mag on a savage 10  (Started: Jan. 13 2005, 21:56 ET, Last post: Jan. 13 2005, 21:56 ET)
Need help with stevens favorite-  (Started: Jan. 5 2005, 21:58 ET, Last post: Jan. 13 2005, 21:14 ET)
Won't go back together
Bedding  (Started: Jan. 9 2005, 12:59 ET, Last post: Jan. 13 2005, 20:01 ET)
Crossbolts & glass bedding
Buckmark trigger  (Started: Jan. 11 2005, 22:22 ET, Last post: Jan. 11 2005, 22:22 ET)
Help on reducing the pull
Reassembly 1903 colt 32 cal auto  (Started: Jan. 10 2005, 11:55 ET, Last post: Jan. 11 2005, 04:04 ET)
5.56mm nato & .223 rem. barrels  (Started: Jan. 9 2005, 20:48 ET, Last post: Jan. 10 2005, 12:33 ET)
How do you tell them apart?
Cold vs. hot browning for ml bbl  (Started: Jan. 8 2005, 10:02 ET, Last post: Jan. 10 2005, 07:54 ET)
Winchester 1500  (Started: Jan. 10 2005, 02:40 ET, Last post: Jan. 10 2005, 02:40 ET)
M70 win .375 h&h  (Started: Jan. 9 2005, 20:03 ET, Last post: Jan. 9 2005, 20:03 ET)
Bedding aides
Chamber insert 9x21  (Started: Dec. 17 2004, 18:30 ET, Last post: Jan. 9 2005, 16:40 ET)
How to install ?
Gripmaking: installation of medallions  (Started: Jan. 8 2005, 17:16 ET, Last post: Jan. 8 2005, 22:32 ET)
Gripmaking: installation of medallions
Car-15  (Started: Jan. 4 2005, 21:02 ET, Last post: Jan. 5 2005, 12:08 ET)
Indicator or range rods  (Started: Dec. 25 2004, 13:04 ET, Last post: Jan. 4 2005, 19:22 ET)
Check indicator or range rods
Westernfield  (Started: Jan. 4 2005, 09:31 ET, Last post: Jan. 4 2005, 09:31 ET)
Model 13
223 large ring mauser 98 build  (Started: Jan. 3 2005, 01:38 ET, Last post: Jan. 4 2005, 01:18 ET)
Were can i find a barrel for this
Bullet tumbling  (Started: Jan. 3 2005, 21:55 ET, Last post: Jan. 4 2005, 01:11 ET)
Why do bullets tumble?
1911 in 7.62 x 25?  (Started: Jan. 2 2005, 12:18 ET, Last post: Jan. 4 2005, 00:25 ET)
Building parker hale 98 action ?  (Started: Dec. 25 2004, 00:17 ET, Last post: Jan. 3 2005, 09:11 ET)
Need some help with this one
Encore face where the fireing pin is  (Started: Dec. 24 2004, 09:44 ET, Last post: Jan. 1 2005, 18:39 ET)
Refinishing or soluotion
New line  (Started: Jan. 1 2005, 13:59 ET, Last post: Jan. 1 2005, 16:36 ET)
Breakdown of parts
Chambering a barrel  (Started: Dec. 10 2004, 22:51 ET, Last post: Jan. 1 2005, 04:50 ET)
How to dial indicate the barrel
Ar-15 magazine quality  (Started: Nov. 27 2004, 21:35 ET, Last post: Jan. 1 2005, 02:25 ET)
Why are some good and some bad?
Cutting a stock  (Started: Dec. 31 2004, 22:09 ET, Last post: Dec. 31 2004, 22:30 ET)
How much?
Revolver sights  (Started: Dec. 22 2004, 12:54 ET, Last post: Dec. 31 2004, 08:25 ET)
Ghost ring?
Revelation shotgun  (Started: Dec. 30 2004, 12:30 ET, Last post: Dec. 30 2004, 13:18 ET)
Who made it?
Charter arms ar 7  (Started: Dec. 25 2004, 06:22 ET, Last post: Dec. 30 2004, 04:32 ET)
Failure to fire
Switching the safety on a winchester 1300  (Started: Dec. 23 2004, 19:54 ET, Last post: Dec. 27 2004, 21:46 ET)
M 86 unknown 9 mm upper reciver  (Started: Dec. 26 2004, 04:28 ET, Last post: Dec. 27 2004, 00:05 ET)
I dont know what this is , do you ?
Without using a gauge. wtb way to measure threads?  (Started: Dec. 23 2004, 11:25 ET, Last post: Dec. 23 2004, 22:06 ET)
Maximum engagement wanted, within reason
Welding question  (Started: Dec. 22 2004, 13:10 ET, Last post: Dec. 23 2004, 05:28 ET)
Holmes 50cal design
Carbine to sbr  (Started: Dec. 20 2004, 14:44 ET, Last post: Dec. 22 2004, 22:27 ET)
Ar-15 vs. m-16 lower receiver  (Started: Dec. 16 2004, 01:20 ET, Last post: Dec. 22 2004, 16:07 ET)
Why are they different?
Best flash hider/muzzle choice  (Started: Nov. 27 2004, 02:34 ET, Last post: Dec. 21 2004, 22:07 ET)
Semi-auto mp-28 project, lathe work needed  (Started: Dec. 19 2004, 18:41 ET, Last post: Dec. 21 2004, 21:58 ET)
?'s about  savage 87 .22 rimfire  (Started: Dec. 20 2004, 03:20 ET, Last post: Dec. 20 2004, 03:20 ET)
Building stocks from a plank  (Started: Dec. 15 2004, 00:29 ET, Last post: Dec. 18 2004, 01:55 ET)
Go †no-go gages  (Started: Dec. 16 2004, 03:19 ET, Last post: Dec. 17 2004, 12:42 ET)
50 cal muzzleloader encore  (Started: Dec. 14 2004, 17:56 ET, Last post: Dec. 16 2004, 06:42 ET)
Naped barrel ,am now haveing problems
Line boring a cylinder  (Started: Dec. 12 2004, 12:53 ET, Last post: Dec. 14 2004, 21:03 ET)
Where can I get Bar stock?  (Started: Oct. 14 2004, 17:44 ET, Last post: Dec. 14 2004, 20:55 ET)
Norinco jw15 tight action bolt disassembly??  (Started: Dec. 13 2004, 05:45 ET, Last post: Dec. 14 2004, 01:57 ET)
Wish to clean bolt to improve action??
Should a timney trigger need tuning  (Started: Dec. 13 2004, 12:22 ET, Last post: Dec. 13 2004, 15:19 ET)
Mk3  (Started: Dec. 12 2004, 22:29 ET, Last post: Dec. 13 2004, 11:28 ET)
Aluminum bolt action  (Started: Dec. 12 2004, 01:21 ET, Last post: Dec. 12 2004, 18:42 ET)
Anyone?
Looking for solutions  (Started: Dec. 8 2004, 20:10 ET, Last post: Dec. 11 2004, 16:56 ET)
1911-style barrel fit
Shotgun  (Started: Dec. 11 2004, 07:40 ET, Last post: Dec. 11 2004, 13:35 ET)
Stupid questions
Gun kote  (Started: Dec. 5 2004, 22:49 ET, Last post: Dec. 7 2004, 21:38 ET)
Longterm firearms storage  (Started: Dec. 3 2004, 20:44 ET, Last post: Dec. 7 2004, 14:41 ET)
Vacuum sealing?
Magna-flux actions?  (Started: Nov. 23 2004, 20:11 ET, Last post: Dec. 4 2004, 11:21 ET)
Suppressers  (Started: Oct. 31 2004, 22:20 ET, Last post: Dec. 3 2004, 18:34 ET)
Mossberg 9200  (Started: Dec. 3 2004, 14:10 ET, Last post: Dec. 3 2004, 14:10 ET)
Bore protection  (Started: Nov. 28 2004, 22:31 ET, Last post: Dec. 3 2004, 13:13 ET)
Bore lubrication
22 hornet primed encore 209x50  (Started: Dec. 2 2004, 13:48 ET, Last post: Dec. 3 2004, 00:16 ET)
Anyone have one?
.300 savage barrel  (Started: Dec. 2 2004, 13:13 ET, Last post: Dec. 2 2004, 13:34 ET)
Relining
Bolt removal on model 1903 bolt action  (Started: Oct. 31 2004, 22:06 ET, Last post: Dec. 2 2004, 00:21 ET)
Need advice on making revolver grips  (Started: Nov. 29 2004, 11:42 ET, Last post: Nov. 30 2004, 20:51 ET)
Chrome lined barrel blanks  (Started: Nov. 30 2004, 00:02 ET, Last post: Nov. 30 2004, 10:43 ET)
Any info?
Change caliber  (Started: Nov. 27 2004, 14:05 ET, Last post: Nov. 29 2004, 23:39 ET)
Firing pin hole out of round  (Started: Nov. 28 2004, 21:39 ET, Last post: Nov. 28 2004, 21:39 ET)
Traveling tool box  (Started: Nov. 22 2004, 14:49 ET, Last post: Nov. 28 2004, 08:48 ET)
Gunsmith tool boxes
Sights for valtro  (Started: Nov. 28 2004, 02:48 ET, Last post: Nov. 28 2004, 02:48 ET)
Hows it work??  (Started: Nov. 23 2004, 16:27 ET, Last post: Nov. 28 2004, 01:54 ET)
What will they think of next
Kimber rimfire target / new .22 conversion  (Started: Nov. 25 2004, 09:53 ET, Last post: Nov. 26 2004, 18:55 ET)
Firing pin removal
Need engineering help  (Started: Nov. 25 2004, 12:49 ET, Last post: Nov. 26 2004, 18:04 ET)
Stevens/savage 22-410  (Started: Nov. 24 2004, 20:56 ET, Last post: Nov. 25 2004, 13:20 ET)
Dissassembly
Ar-15  (Started: Nov. 19 2004, 22:38 ET, Last post: Nov. 23 2004, 18:03 ET)
Casting
Mossberg 500 safety disasembly?  (Started: Nov. 22 2004, 00:04 ET, Last post: Nov. 23 2004, 14:09 ET)
Welding  (Started: Nov. 22 2004, 01:05 ET, Last post: Nov. 22 2004, 23:32 ET)
Cleaning brass scratches off surface of gun  (Started: Nov. 21 2004, 10:19 ET, Last post: Nov. 22 2004, 14:17 ET)
Getting started  (Started: Nov. 19 2004, 10:09 ET, Last post: Nov. 22 2004, 10:45 ET)
Cutting, crowning chrome lined barrels  (Started: Nov. 21 2004, 15:02 ET, Last post: Nov. 21 2004, 17:19 ET)
Para ordanance  (Started: Nov. 18 2004, 16:09 ET, Last post: Nov. 19 2004, 13:15 ET)
Tac5
Stevens 54a - parts  (Started: Nov. 19 2004, 11:15 ET, Last post: Nov. 19 2004, 11:44 ET)
Sources?
Deepening the throat of an existing chamber  (Started: Nov. 18 2004, 12:27 ET, Last post: Nov. 18 2004, 14:19 ET)
Simple single shot .22lr action plans?  (Started: Dec. 20 2003, 17:10 ET, Last post: Nov. 17 2004, 22:08 ET)
Does anybody have any?
Info on "pen guns"  (Started: Nov. 13 2004, 08:45 ET, Last post: Nov. 14 2004, 22:36 ET)
Info needed  from smiths  (Started: Nov. 14 2004, 22:29 ET, Last post: Nov. 14 2004, 22:29 ET)
Please repond to email
Ak47 pump action and other cf pumps 4 australia?  (Started: Nov. 14 2004, 00:46 ET, Last post: Nov. 14 2004, 20:57 ET)
Cheap cf pump wanted plus par3 stuf
Smith and wesson mod. 15-3 revolver  (Started: Nov. 11 2004, 20:05 ET, Last post: Nov. 14 2004, 17:56 ET)
Fire control group & trigger group  (Started: Nov. 13 2004, 12:00 ET, Last post: Nov. 13 2004, 22:38 ET)
The same or different?
Id and od of sks front sight  (Started: Nov. 12 2004, 18:59 ET, Last post: Nov. 12 2004, 19:33 ET)
Stevens Favorite Barrel Question  (Started: Sep. 21 2004, 23:21 ET, Last post: Nov. 12 2004, 19:03 ET)
Swapping Barrels on Stevens Favorite
Extraction problems with d max carbine  (Started: Nov. 12 2004, 13:29 ET, Last post: Nov. 12 2004, 17:20 ET)
Request for assistance with problem
Bolt gun help!  (Started: Nov. 8 2004, 22:47 ET, Last post: Nov. 10 2004, 13:12 ET)
OD For Threading  (Started: Oct. 24 2004, 20:40 ET, Last post: Nov. 6 2004, 10:37 ET)
Making Muzzle brakes out of 310 stainless  (Started: Oct. 29 2004, 13:14 ET, Last post: Nov. 1 2004, 21:26 ET)
Making Muzzle brakes out of 310 stainles
Tools required for AMD-65 build?  (Started: Oct. 30 2004, 15:23 ET, Last post: Nov. 1 2004, 14:58 ET)
AR 16" Barrel  (Started: Oct. 27 2004, 15:14 ET, Last post: Nov. 1 2004, 14:08 ET)
How long?
Marlin .22  (Started: Oct. 29 2004, 21:31 ET, Last post: Oct. 31 2004, 22:02 ET)
help me please  (Started: Oct. 27 2004, 19:10 ET, Last post: Oct. 31 2004, 17:24 ET)
Win Model 70 bolt trouble
what's stronger, fine thread or coarse thread?  (Started: Oct. 20 2004, 23:07 ET, Last post: Oct. 29 2004, 22:11 ET)
What are the Differences?  (Started: Oct. 28 2004, 14:58 ET, Last post: Oct. 29 2004, 14:14 ET)
AR-15 to AR-10
.22wmr, .22lr compatibility  (Started: Oct. 28 2004, 15:38 ET, Last post: Oct. 29 2004, 14:12 ET)
Martini Shank  (Started: Oct. 27 2004, 15:20 ET, Last post: Oct. 28 2004, 21:10 ET)
Pictures?
4140.  Hot Rolled or Cold Rolled?  (Started: Oct. 27 2004, 23:55 ET, Last post: Oct. 28 2004, 13:49 ET)
M1Garand 308/Magizine convertion  (Started: Oct. 27 2004, 20:42 ET, Last post: Oct. 27 2004, 20:42 ET)
Who has converted a M1 to mag feed 308
Lee Enfield No4 MkIII w/bad chamber  (Started: Oct. 25 2004, 19:23 ET, Last post: Oct. 27 2004, 15:40 ET)
4130 stainless?  (Started: Oct. 22 2004, 21:46 ET, Last post: Oct. 27 2004, 14:50 ET)
Marlin 81DL Receiver Sight  (Started: Oct. 26 2004, 09:15 ET, Last post: Oct. 26 2004, 09:15 ET)
Centering Adjustment
10 gauge slug mold wanted  (Started: Oct. 25 2004, 15:22 ET, Last post: Oct. 25 2004, 21:32 ET)
Field gauge- how to use?  (Started: Oct. 24 2004, 18:51 ET, Last post: Oct. 25 2004, 18:13 ET)
Headspace Gauges  (Started: Oct. 6 2004, 00:57 ET, Last post: Oct. 25 2004, 14:43 ET)
Why can't I just ....
Question on .50 BMG bolt gun build  (Started: Oct. 13 2004, 02:56 ET, Last post: Oct. 25 2004, 08:29 ET)
Glock frame  (Started: Oct. 25 2004, 00:54 ET, Last post: Oct. 25 2004, 00:54 ET)
What kind of Plastic?
44 rem mag twist rate  (Started: Oct. 22 2004, 10:56 ET, Last post: Oct. 22 2004, 15:08 ET)
:help1:
sine of ????  (Started: Oct. 21 2004, 02:03 ET, Last post: Oct. 21 2004, 23:43 ET)
need math guru
742 woodsmaster and 7400  (Started: Oct. 19 2004, 21:11 ET, Last post: Oct. 21 2004, 22:11 ET)
Triggers  (Started: Sep. 24 2004, 20:20 ET, Last post: Oct. 20 2004, 19:49 ET)
Triggers
Rectangular lower to tubular upper?  (Started: Oct. 18 2004, 12:36 ET, Last post: Oct. 20 2004, 11:20 ET)
shortening swedish m96  (Started: Oct. 19 2004, 15:03 ET, Last post: Oct. 19 2004, 18:50 ET)
cutting crowing barrel, front sights?
G3 vs. CETME  (Started: Oct. 13 2004, 12:42 ET, Last post: Oct. 19 2004, 00:42 ET)
interchangeability?
AK legal question  (Started: Oct. 11 2004, 16:11 ET, Last post: Oct. 18 2004, 04:37 ET)
Tuning The Para Ordnance LDA Pistols?  (Started: Oct. 16 2004, 12:49 ET, Last post: Oct. 16 2004, 12:49 ET)
Browning BAR reloading problem.  (Started: Oct. 16 2004, 08:49 ET, Last post: Oct. 16 2004, 08:49 ET)
screwed up screw holes  (Started: Sep. 9 2004, 19:02 ET, Last post: Oct. 14 2004, 22:40 ET)
Newbie, wanting to get started!  (Started: Aug. 26 2004, 01:34 ET, Last post: Oct. 14 2004, 20:02 ET)
Lubrication for Chamber Reaming  (Started: Sep. 1 2004, 16:55 ET, Last post: Oct. 14 2004, 19:20 ET)
What do you use?
Best glue for glass filled nylon????  (Started: Sep. 22 2004, 20:44 ET, Last post: Oct. 14 2004, 18:59 ET)
accidentally drilled into the side of a chamber  (Started: Sep. 28 2004, 04:44 ET, Last post: Oct. 14 2004, 18:58 ET)
a tiny bit
Templates for 1911 frame  (Started: Oct. 13 2004, 14:13 ET, Last post: Oct. 13 2004, 14:13 ET)
template or jig available for milling
Throat  & Chamber Erosion  (Started: Oct. 13 2004, 12:53 ET, Last post: Oct. 13 2004, 13:12 ET)
7.5mm Swiss  (Started: Oct. 7 2004, 12:41 ET, Last post: Oct. 13 2004, 09:58 ET)
Would anyone like to give dimensions?  (Started: Oct. 12 2004, 12:50 ET, Last post: Oct. 13 2004, 08:31 ET)
Remington bolt extractor problem  (Started: Oct. 12 2004, 15:51 ET, Last post: Oct. 13 2004, 01:47 ET)
Remington bolt extractor problem
German claw-type scope mounts  (Started: Oct. 11 2004, 08:58 ET, Last post: Oct. 12 2004, 11:27 ET)
Are they worht the trouble and expence?
7.62mm Barrels  (Started: Oct. 10 2004, 18:54 ET, Last post: Oct. 11 2004, 23:21 ET)
Barrel Dependability?
Shortening the M93  (Started: Oct. 2 2004, 11:47 ET, Last post: Oct. 11 2004, 15:13 ET)
Any info?
Winchester model 12 adjusting sleeve HELP !  (Started: Oct. 10 2004, 20:54 ET, Last post: Oct. 10 2004, 20:54 ET)
Winchester model 12 adjusting sleeve HEL
Machining MIM  (Started: Oct. 1 2004, 16:31 ET, Last post: Oct. 9 2004, 22:12 ET)
Win Mod 70 bolt disassembly  (Started: Sep. 11 2004, 18:03 ET, Last post: Oct. 9 2004, 00:42 ET)
installing a timney trigger
Revolver Tools  (Started: Oct. 6 2004, 08:24 ET, Last post: Oct. 8 2004, 14:02 ET)
How do I use these properly?
6.5x55 in a MAS  (Started: Oct. 6 2004, 04:36 ET, Last post: Oct. 8 2004, 10:34 ET)
6.5x55 in a MAS
New Here...please help  (Started: Oct. 7 2004, 20:58 ET, Last post: Oct. 7 2004, 21:13 ET)
nickel plating...chemical remover?
Saiga-12 Shotgun - Cutting Barrel  (Started: Oct. 6 2004, 10:42 ET, Last post: Oct. 6 2004, 10:42 ET)
Considerations for Chrome Lined Barrel
ak headspace gauges  (Started: Oct. 5 2004, 22:39 ET, Last post: Oct. 6 2004, 10:20 ET)
Source for gun screws  (Started: Sep. 28 2004, 04:33 ET, Last post: Oct. 6 2004, 08:17 ET)
1919 building?  (Started: Sep. 30 2004, 02:01 ET, Last post: Oct. 5 2004, 09:55 ET)
How hard are they
HI-POWER PARTS INTERCHANGABILITY  (Started: Oct. 4 2004, 19:24 ET, Last post: Oct. 5 2004, 09:40 ET)
Looking for info on Inglis vs FN vs FEG
Remington Mod.700 bolt  (Started: Oct. 4 2004, 18:19 ET, Last post: Oct. 5 2004, 05:21 ET)
Remington magazine box  (Started: Sep. 27 2004, 22:21 ET, Last post: Oct. 4 2004, 20:01 ET)
Accurizing
barrel pin removal  (Started: Oct. 4 2004, 02:17 ET, Last post: Oct. 4 2004, 02:17 ET)
Browning Hi-Power  (Started: Sep. 25 2004, 14:08 ET, Last post: Oct. 2 2004, 11:23 ET)
Trigger very light after first round
rem 1148 op handle plunger  (Started: Sep. 26 2004, 01:58 ET, Last post: Oct. 1 2004, 21:42 ET)
how to remove
Rem. 870 "youth" front bead?  (Started: Sep. 28 2004, 13:38 ET, Last post: Sep. 30 2004, 13:57 ET)
Why won't it come out?
why can't I post?  (Started: Sep. 27 2004, 22:29 ET, Last post: Sep. 29 2004, 21:44 ET)
why can't I post?
1911 wont slide the slide when fired  (Started: Sep. 23 2004, 19:34 ET, Last post: Sep. 29 2004, 16:34 ET)
1911 wont slide the slide when fired
Tight choke project  (Started: Sep. 22 2004, 16:32 ET, Last post: Sep. 27 2004, 15:08 ET)
Sako Trigger Adjustment??  (Started: Sep. 17 2004, 15:46 ET, Last post: Sep. 27 2004, 14:08 ET)
nned to re-cock hammer between each shot  (Started: Aug. 14 2004, 19:52 ET, Last post: Sep. 25 2004, 10:13 ET)
M-1 Garand stock replacement  (Started: Sep. 22 2004, 16:28 ET, Last post: Sep. 23 2004, 11:33 ET)
stocks
Simplest bolt design?  (Started: Sep. 20 2004, 14:10 ET, Last post: Sep. 22 2004, 11:20 ET)
mac-10 45cal  (Started: Sep. 20 2004, 19:45 ET, Last post: Sep. 21 2004, 19:23 ET)
Unlocked 9mm blowback?  (Started: Sep. 19 2004, 00:31 ET, Last post: Sep. 21 2004, 14:08 ET)
what am I missing?  (Started: Sep. 13 2004, 20:18 ET, Last post: Sep. 21 2004, 02:52 ET)
Aftermarket AR-15 Barrels  (Started: Sep. 19 2004, 21:16 ET, Last post: Sep. 19 2004, 23:48 ET)
Quality Of Barrels
can a mosin be converted to another cal.  (Started: Sep. 19 2004, 15:41 ET, Last post: Sep. 19 2004, 18:55 ET)
newbie with a pitted barrel
This design  (Started: Nov. 21 2003, 13:08 ET, Last post: Sep. 19 2004, 08:15 ET)
is it any good?
Flat Mainsprings  (Started: Sep. 10 2004, 08:58 ET, Last post: Sep. 18 2004, 07:40 ET)
Advanced ageing  (Started: Sep. 15 2004, 20:32 ET, Last post: Sep. 16 2004, 17:20 ET)
Semi Auto MG34 ?  (Started: Sep. 16 2004, 10:32 ET, Last post: Sep. 16 2004, 10:32 ET)
Anyone ever done this?
Tack welder  (Started: Sep. 14 2004, 07:13 ET, Last post: Sep. 14 2004, 22:21 ET)
Tack welding AK rails
suomi magazine dimensions?  (Started: Sep. 14 2004, 21:03 ET, Last post: Sep. 14 2004, 21:03 ET)
870 express 20  willnot eject shell  (Started: Sep. 13 2004, 01:33 ET, Last post: Sep. 14 2004, 13:05 ET)
Billet Size?  (Started: Sep. 14 2004, 10:32 ET, Last post: Sep. 14 2004, 11:51 ET)
10/22 Receiver Size
Barrel threading?  (Started: Sep. 13 2004, 10:51 ET, Last post: Sep. 13 2004, 13:23 ET)
measurements
Cutting dovetails on a Romak optics mount  (Started: Sep. 12 2004, 19:28 ET, Last post: Sep. 13 2004, 00:49 ET)
Savage Model 24  (Started: Sep. 3 2004, 18:33 ET, Last post: Sep. 12 2004, 21:30 ET)
How are the barrels held together?
Stevens Visible (Miserable) Loader Help  (Started: Sep. 10 2004, 21:30 ET, Last post: Sep. 12 2004, 15:54 ET)
Taking apart
Set-Up to turn .45acp ramped barrel in lathe  (Started: Sep. 4 2004, 14:42 ET, Last post: Sep. 12 2004, 11:46 ET)
Mystery MG Barrel  (Started: Sep. 7 2004, 13:45 ET, Last post: Sep. 11 2004, 09:34 ET)
What the heck is this?????
miniature cannon question  (Started: Sep. 10 2004, 22:37 ET, Last post: Sep. 10 2004, 23:09 ET)
legalities of a mini homebuilt cannon
Bushing a firing pin  (Started: Sep. 10 2004, 12:23 ET, Last post: Sep. 10 2004, 21:02 ET)
How do I do it?
delayed blow back systems-a415 ak47  (Started: Sep. 3 2004, 06:40 ET, Last post: Sep. 10 2004, 11:58 ET)
how do they work???
National Ordnance 1911 80% frames  (Started: Sep. 10 2004, 06:47 ET, Last post: Sep. 10 2004, 06:47 ET)
Gun Stock Question  (Started: Sep. 9 2004, 11:54 ET, Last post: Sep. 9 2004, 22:35 ET)
how to remove wax from Checkering
Browning BLR  (Started: Aug. 30 2004, 18:47 ET, Last post: Sep. 9 2004, 12:15 ET)
jammed cases
headspacing for .45acp/Mauser conversion  (Started: Sep. 8 2004, 11:34 ET, Last post: Sep. 9 2004, 00:49 ET)
Trebark Second Skin  (Started: Sep. 8 2004, 19:39 ET, Last post: Sep. 8 2004, 19:39 ET)
How to remove 1911 toolmarks?  (Started: Aug. 29 2004, 12:11 ET, Last post: Sep. 8 2004, 12:38 ET)
Finishing slides
where to buy cannon fuse  (Started: Sep. 7 2004, 09:43 ET, Last post: Sep. 8 2004, 07:42 ET)
cannon fuse
Tapping shotgun barrels  (Started: Sep. 7 2004, 21:45 ET, Last post: Sep. 7 2004, 22:03 ET)
What's involved?
1919barrel rethreaded for mauser?  (Started: Aug. 26 2004, 20:06 ET, Last post: Sep. 7 2004, 15:28 ET)
SHOT GUN WORK  (Started: Sep. 2 2004, 13:37 ET, Last post: Sep. 7 2004, 09:00 ET)
Lengthing the Forcing Cone
Ithaca M-37  (Started: Sep. 5 2004, 10:02 ET, Last post: Sep. 7 2004, 07:44 ET)
Bolt binding in reciever
Zip gun vs. Homebuilt  (Started: Aug. 30 2004, 08:25 ET, Last post: Sep. 7 2004, 07:26 ET)
Head spacing  (Started: Aug. 26 2004, 23:35 ET, Last post: Sep. 6 2004, 20:45 ET)
Clearance between Bolt and Barrel
G3/FMP vs. CETME trigger packs  (Started: Sep. 3 2004, 00:50 ET, Last post: Sep. 4 2004, 17:29 ET)
Are they interchangeable?
new, need help cleaning pistols  (Started: Sep. 3 2004, 13:46 ET, Last post: Sep. 3 2004, 15:46 ET)
right way to clean??
AR-15 CAD PLANS??  (Started: Sep. 2 2004, 22:49 ET, Last post: Sep. 3 2004, 10:57 ET)
8 inch 7.62x51 flash hider?  (Started: Sep. 1 2004, 22:59 ET, Last post: Sep. 3 2004, 09:08 ET)
Where do I start to make one?
ATFE legality letters....  (Started: Sep. 2 2004, 19:59 ET, Last post: Sep. 3 2004, 00:53 ET)
Barrel extensions and mock silencers
Electric Bore Claener  (Started: Sep. 2 2004, 12:44 ET, Last post: Sep. 2 2004, 23:48 ET)
Home built Foul-Out
Carbide Inserts  (Started: Aug. 28 2004, 18:02 ET, Last post: Sep. 1 2004, 19:42 ET)
do different manufactures make the same
Need HELP w/ Enfield barrel removal  (Started: Aug. 28 2004, 21:56 ET, Last post: Sep. 1 2004, 05:05 ET)
Problems with cast frames  (Started: May 11 2003, 23:22 ET, Last post: Aug. 30 2004, 01:20 ET)
Has anyone had any?
Beretta Cougar spring replacement?  (Started: Aug. 28 2004, 19:22 ET, Last post: Aug. 28 2004, 19:22 ET)
Mold Making  (Started: Aug. 28 2004, 14:55 ET, Last post: Aug. 28 2004, 14:55 ET)
CNC Mill?
6-32 Machine Screw  (Started: Aug. 27 2004, 12:39 ET, Last post: Aug. 27 2004, 15:58 ET)
what size drill and tap to use
Is there a easier way...  (Started: Aug. 27 2004, 09:48 ET, Last post: Aug. 27 2004, 15:13 ET)
recutting receiver threads
Barrel Thread  (Started: Aug. 25 2004, 13:23 ET, Last post: Aug. 26 2004, 18:10 ET)
Weatherby Mark V vs. Weatherby Vanguard
Free Floating Barrel  (Started: Aug. 25 2004, 12:45 ET, Last post: Aug. 26 2004, 16:06 ET)
What's the difference?
Threads?? internal and external+tap sizes???  (Started: Aug. 25 2004, 19:43 ET, Last post: Aug. 25 2004, 20:17 ET)
Rechamber remington 700  (Started: Aug. 12 2004, 14:00 ET, Last post: Aug. 25 2004, 17:58 ET)
replacing barrel
welding on a barrel - with mig?  (Started: Aug. 21 2004, 11:20 ET, Last post: Aug. 23 2004, 08:31 ET)
CETME issues  (Started: Jul. 21 2004, 16:09 ET, Last post: Aug. 22 2004, 15:54 ET)
its just denting the primers
hk91 build I need help (not sure what to do)  (Started: Aug. 10 2004, 01:35 ET, Last post: Aug. 22 2004, 00:04 ET)
I need info. What to do first?
Inexpensive mig welder?  (Started: Aug. 9 2004, 22:31 ET, Last post: Aug. 21 2004, 23:56 ET)
...
WTK about barrel porting & slide machining  (Started: Aug. 20 2004, 22:07 ET, Last post: Aug. 21 2004, 08:26 ET)
Hole diameter, angle of separation, etc
.30 carbine Bolt Action?  (Started: Aug. 8 2004, 12:36 ET, Last post: Aug. 19 2004, 21:09 ET)
Is there an affordable action?
fake barrel extention  (Started: Aug. 16 2004, 01:12 ET, Last post: Aug. 17 2004, 13:27 ET)
anyone know how to make one or havePlans
Need to fix a lopsided crown  (Started: Aug. 15 2004, 21:54 ET, Last post: Aug. 16 2004, 23:36 ET)
Remington Mod 25  (Started: Aug. 9 2004, 11:42 ET, Last post: Aug. 13 2004, 23:34 ET)
Need expert on this obsolete pump rifle
HELP!! browning bbr in 7 mag.patterns not groups  (Started: Jul. 19 2004, 20:48 ET, Last post: Aug. 13 2004, 23:28 ET)
wandering zero
chamber reamers  (Started: Jun. 15 2004, 13:03 ET, Last post: Aug. 11 2004, 18:56 ET)
Making a flash hider/muzzle brake?  (Started: Aug. 2 2004, 19:50 ET, Last post: Aug. 11 2004, 11:54 ET)
savage mod. 93 random misfire  (Started: Aug. 10 2004, 16:15 ET, Last post: Aug. 10 2004, 20:04 ET)
S & W model 66 needs a barrel  (Started: Jul. 23 2004, 18:20 ET, Last post: Aug. 10 2004, 12:25 ET)
Is it difficult to change the barrel?
Loose leather holster  (Started: Aug. 9 2004, 23:19 ET, Last post: Aug. 10 2004, 12:02 ET)
Can anything be done?
Tig welding with HF mini 80 invertor  (Started: Aug. 8 2004, 14:04 ET, Last post: Aug. 8 2004, 19:46 ET)
Which electrode for TIG  (Started: Aug. 6 2004, 07:48 ET, Last post: Aug. 8 2004, 11:25 ET)
ROMAK PSL KIT  (Started: Aug. 7 2004, 12:36 ET, Last post: Aug. 7 2004, 12:36 ET)
WHATS DIFFERENT?
Browning A-Bolt  (Started: Jul. 25 2004, 08:45 ET, Last post: Aug. 7 2004, 00:16 ET)
Opinions Wanted
Who does the best bluing?  (Started: Aug. 4 2004, 14:07 ET, Last post: Aug. 5 2004, 11:22 ET)
Subscribe Now before the change  (Started: Aug. 3 2004, 14:18 ET, Last post: Aug. 3 2004, 15:39 ET)
Welding up a gas port...?  (Started: Jul. 28 2004, 12:39 ET, Last post: Aug. 2 2004, 14:08 ET)
will this work?
new barrel  (Started: Jul. 30 2004, 19:29 ET, Last post: Aug. 1 2004, 07:39 ET)
stumped???  (Started: Aug. 1 2004, 06:53 ET, Last post: Aug. 1 2004, 07:09 ET)
M-16 Timing  (Started: Jul. 29 2004, 16:36 ET, Last post: Aug. 1 2004, 03:46 ET)
Adjusting Timing
22RF TO 22 HORNET  (Started: Jul. 27 2004, 16:48 ET, Last post: Jul. 30 2004, 12:57 ET)
Winchester 88  (Started: Jul. 30 2004, 01:45 ET, Last post: Jul. 30 2004, 01:45 ET)
eddystone  (Started: Jul. 26 2004, 22:50 ET, Last post: Jul. 29 2004, 21:24 ET)
Minor gunsmithing problem  (Started: Jul. 22 2004, 15:02 ET, Last post: Jul. 29 2004, 19:31 ET)
magazine follower on Model 98 mauser
ROBINSON M96 Expeditionary  (Started: Jul. 29 2004, 03:19 ET, Last post: Jul. 29 2004, 03:19 ET)
Any feed back from knowledgeable persons
Different types of metals  (Started: Jul. 27 2004, 17:02 ET, Last post: Jul. 28 2004, 12:02 ET)
for an AK receiver
Browning BAR 3006  (Started: Jul. 27 2004, 22:14 ET, Last post: Jul. 27 2004, 22:14 ET)
stock mounting plate
Magnum Rifle Build  (Started: Jul. 24 2004, 17:58 ET, Last post: Jul. 27 2004, 04:51 ET)
more problems  (Started: Jul. 24 2004, 20:49 ET, Last post: Jul. 26 2004, 23:43 ET)
now the bolt isnt going all the way
encore muzzeloader barrel pitted  (Started: Jul. 24 2004, 14:27 ET, Last post: Jul. 26 2004, 13:12 ET)
barrel pitted a little
Tube fed 22 rifles  (Started: Jul. 22 2004, 23:09 ET, Last post: Jul. 26 2004, 11:13 ET)
Whats the deal?
new caliber designation on rechambered barrel?  (Started: Jul. 25 2004, 12:50 ET, Last post: Jul. 26 2004, 05:27 ET)
Fluting a barrel  (Started: Jul. 24 2004, 06:50 ET, Last post: Jul. 24 2004, 06:50 ET)
Tooling
STI/SVI blueprint.  (Started: Jul. 23 2004, 00:55 ET, Last post: Jul. 23 2004, 00:55 ET)
who has one?
Questions about tannery frames  (Started: Jun. 19 2002, 23:28 ET, Last post: Jul. 21 2004, 23:59 ET)
The beretta/taurus 92, that is
Turning Down a Rifle Barrel  (Started: Jul. 19 2004, 19:19 ET, Last post: Jul. 21 2004, 11:20 ET)
Is it Necessary  (Started: Jul. 19 2004, 12:12 ET, Last post: Jul. 19 2004, 21:55 ET)
Receiver-DIAS  (Started: Jul. 19 2004, 15:28 ET, Last post: Jul. 19 2004, 21:48 ET)
Incompatibility of DIAS w/the receiver
Mag experts wanted  (Started: Jul. 12 2004, 14:51 ET, Last post: Jul. 19 2004, 15:12 ET)
Need type of gun fitting to magazine
common knowledge.....  (Started: Jul. 14 2004, 19:35 ET, Last post: Jul. 19 2004, 14:29 ET)
but had to ask anyway
Help fitting FLGR  (Started: Jul. 19 2004, 10:56 ET, Last post: Jul. 19 2004, 13:34 ET)
Newby can't get bolt out of 1895 MArlin - Help  (Started: Jul. 18 2004, 14:03 ET, Last post: Jul. 18 2004, 22:06 ET)
Browning .22 semi-auto  (Started: Jul. 6 2004, 11:06 ET, Last post: Jul. 17 2004, 07:03 ET)
chambering first shot
Enfield No4 Mk1 T  (Started: Jul. 11 2004, 22:36 ET, Last post: Jul. 17 2004, 00:27 ET)
pads for scope mount
h&r indexing  (Started: Jul. 14 2004, 23:00 ET, Last post: Jul. 15 2004, 20:03 ET)
How to make 340 Weatherby Magnum  (Started: Jul. 9 2004, 02:41 ET, Last post: Jul. 15 2004, 11:18 ET)
340 Weatherby Magnum
ACE ARMS PRE BENT  (Started: Jun. 26 2004, 10:51 ET, Last post: Jul. 14 2004, 19:45 ET)
WAIT??
Colt Military DA Revolver problem  (Started: Jul. 6 2004, 12:40 ET, Last post: Jul. 10 2004, 12:19 ET)
7.5 Swiss to .308  (Started: Jul. 7 2004, 22:51 ET, Last post: Jul. 9 2004, 23:37 ET)
1919 crank plans?  (Started: Jul. 9 2004, 10:49 ET, Last post: Jul. 9 2004, 10:49 ET)
M16 parts kit purchase  (Started: Jul. 5 2004, 16:08 ET, Last post: Jul. 8 2004, 10:10 ET)
so I decided...
How to blacken stainless  (Started: Apr. 18 2004, 00:05 ET, Last post: Jul. 8 2004, 07:33 ET)
Proper Lubrication  (Started: Jun. 28 2004, 13:22 ET, Last post: Jul. 7 2004, 12:09 ET)
Enfield Bolt
Installing a Poly choke  (Started: Jul. 1 2004, 22:40 ET, Last post: Jul. 6 2004, 00:51 ET)
Will this work?
More 1911 Fitting  (Started: Jun. 1 2004, 19:55 ET, Last post: Jul. 4 2004, 18:53 ET)
Slide to frame
Beretta M92 Vs M96  (Started: Jun. 28 2004, 13:31 ET, Last post: Jun. 28 2004, 20:36 ET)
Conversion
AMD (and others) Receiver "Dimples"  (Started: Jun. 27 2004, 22:01 ET, Last post: Jun. 27 2004, 22:01 ET)
How do you make them?
winchester m100  (Started: Jun. 24 2004, 23:13 ET, Last post: Jun. 27 2004, 13:52 ET)
serivicing a m100
Metallurgy  (Started: Jun. 17 2004, 22:37 ET, Last post: Jun. 26 2004, 08:54 ET)
Question for qualified metalurgists
missing bolt assy. of Win M275  (Started: Jun. 24 2004, 23:22 ET, Last post: Jun. 24 2004, 23:22 ET)
wmr model 275bolt
454 Casull and M1892 replica rifles  (Started: Jun. 20 2004, 12:12 ET, Last post: Jun. 21 2004, 13:32 ET)
How durable are these as machines?
Timing  (Started: Jun. 19 2004, 22:57 ET, Last post: Jun. 20 2004, 09:51 ET)
Full-auto timing
8 mm dragnov build  (Started: Jun. 13 2004, 01:45 ET, Last post: Jun. 19 2004, 09:48 ET)
i want to build a 8mm drag
Hi guys  (Started: Jun. 18 2004, 18:21 ET, Last post: Jun. 18 2004, 18:21 ET)
M1 Garand rebarrel?  (Started: Jun. 15 2004, 14:43 ET, Last post: Jun. 18 2004, 15:38 ET)
Help a first timer please.
P-14,P-17 Enfield  (Started: May 10 2004, 13:11 ET, Last post: Jun. 18 2004, 12:24 ET)
Need infor on building sporter
Rebush S & W Centerpin Hole  (Started: Jun. 13 2004, 11:54 ET, Last post: Jun. 17 2004, 21:05 ET)
Mateba Autorevolver.  (Started: May 22 2004, 00:19 ET, Last post: Jun. 15 2004, 12:56 ET)
General prices for customizations
22/45 grip mod  (Started: Jun. 14 2004, 23:42 ET, Last post: Jun. 14 2004, 23:42 ET)
experience?
HOMEBUILT BOLT ACTION INFO  (Started: Jun. 7 2004, 14:51 ET, Last post: Jun. 11 2004, 16:33 ET)
AMD-63 BARREL EXTENSION  (Started: Jun. 8 2004, 12:28 ET, Last post: Jun. 8 2004, 15:16 ET)
WHAT SIZE???
My gun broke, Oh ya, Hi I'm New  (Started: May 27 2004, 18:17 ET, Last post: Jun. 7 2004, 14:51 ET)
Advice on welding
762x25 pistol rd ak  (Started: Jun. 2 2004, 18:08 ET, Last post: Jun. 7 2004, 12:04 ET)
What kind of silver solder  (Started: Jun. 7 2004, 00:41 ET, Last post: Jun. 7 2004, 07:05 ET)
Gunsmiths, Look here!  (Started: Jun. 5 2004, 03:36 ET, Last post: Jun. 6 2004, 18:20 ET)
Looking for Gunsmiths, Gunmaker, etc.
rebarrling a turkish mauser  (Started: May 31 2004, 14:29 ET, Last post: Jun. 3 2004, 20:03 ET)
rebarrling a turkish mauser to 308
stevens 124 bolt removal?  (Started: Sep. 21 2003, 07:40 ET, Last post: Jun. 1 2004, 06:46 ET)
help!
Full length guide rod installation  (Started: Apr. 19 2004, 17:03 ET, Last post: May 31 2004, 15:38 ET)
300 whisper  (Started: May 21 2004, 16:43 ET, Last post: May 31 2004, 14:13 ET)
300 whisper
gold bead on front sight post  (Started: May 30 2004, 22:29 ET, Last post: May 31 2004, 03:02 ET)
Browning Lever action Stainless  (Started: May 31 2004, 01:41 ET, Last post: May 31 2004, 01:41 ET)
Rechambering 50-110
Short Stock  (Started: May 28 2004, 10:59 ET, Last post: May 28 2004, 13:16 ET)
Remington 7600  (Started: May 27 2004, 23:52 ET, Last post: May 28 2004, 10:36 ET)
barrel block
Titanium Receivers  (Started: May 23 2004, 17:04 ET, Last post: May 27 2004, 01:26 ET)
How to Tactial bolt knob install  (Started: May 13 2004, 20:46 ET, Last post: May 22 2004, 22:24 ET)
tactial knob job
Full Moon Clips  (Started: May 22 2004, 02:59 ET, Last post: May 22 2004, 02:59 ET)
Couple of barrel fitting questions...  (Started: May 21 2004, 18:38 ET, Last post: May 22 2004, 01:00 ET)
Fail to eject  (Started: May 20 2004, 18:01 ET, Last post: May 21 2004, 12:08 ET)
removing magazine safety on feg 9mm  (Started: May 16 2004, 12:18 ET, Last post: May 21 2004, 12:03 ET)
Winchester Model 250 Takedown  (Started: May 20 2004, 20:57 ET, Last post: May 21 2004, 08:35 ET)
.22 cal lever action
.22 mag revolver  (Started: May 19 2004, 10:39 ET, Last post: May 20 2004, 07:03 ET)
re-chambering
best firing pin material  (Started: May 18 2004, 19:50 ET, Last post: May 19 2004, 22:44 ET)
homemade firing pin
Barrel--to float or not?  (Started: May 16 2004, 00:02 ET, Last post: May 18 2004, 18:28 ET)
questions about floating
Tec-22 Short Cycle  (Started: May 12 2004, 15:25 ET, Last post: May 18 2004, 16:07 ET)
welding on barrel  (Started: May 15 2004, 15:16 ET, Last post: May 18 2004, 12:19 ET)
G3 Parts Kits for $425  (Started: Apr. 4 2004, 19:47 ET, Last post: May 18 2004, 12:14 ET)
POF-USA's G3 parts kits
M14 BOLT ROLLER  (Started: May 13 2004, 12:08 ET, Last post: May 14 2004, 18:25 ET)
need help starting up  (Started: May 10 2004, 06:19 ET, Last post: May 12 2004, 18:33 ET)
single shot .22  (Started: May 10 2004, 13:26 ET, Last post: May 11 2004, 22:05 ET)
I have a grip frame similar to ruger
Mini 14 Bolt Release  (Started: May 8 2004, 14:11 ET, Last post: May 11 2004, 17:33 ET)
Gunsmithing
gun steels  (Started: May 7 2004, 20:38 ET, Last post: May 11 2004, 13:58 ET)
Glenfield Model 778 12 ga  (Started: May 7 2004, 10:44 ET, Last post: May 7 2004, 10:44 ET)
Cartridge Release Problem
New here and need advice!  (Started: May 4 2004, 22:30 ET, Last post: May 7 2004, 00:32 ET)
Building a single shot action
need parts for a Fulton sxs  (Started: May 5 2004, 20:50 ET, Last post: May 5 2004, 21:22 ET)
by Hunter arms, Fulton, NY
Browning Nomad  (Started: May 4 2004, 17:47 ET, Last post: May 4 2004, 17:47 ET)
Receiver
Need some advice  (Started: May 4 2004, 08:03 ET, Last post: May 4 2004, 13:00 ET)
AP-74 Firing Pin  (Started: Apr. 20 2004, 16:06 ET, Last post: May 3 2004, 22:16 ET)
M1 help newbee  (Started: May 1 2004, 09:55 ET, Last post: May 3 2004, 01:48 ET)
tapping receiver
M16 parts dimensions  (Started: Apr. 30 2004, 20:23 ET, Last post: Apr. 30 2004, 21:36 ET)
M14/MiA Match Barrels  (Started: Apr. 29 2004, 14:08 ET, Last post: Apr. 29 2004, 20:56 ET)
Barrel Selection
Magazine Surge - Kel Tec Sub-40  (Started: Apr. 28 2004, 14:50 ET, Last post: Apr. 29 2004, 07:56 ET)
Best 1911 Replacement Parts  (Started: Apr. 25 2004, 13:34 ET, Last post: Apr. 28 2004, 07:43 ET)
How to parkerize for a new guy  (Started: Apr. 23 2004, 08:14 ET, Last post: Apr. 27 2004, 15:36 ET)
Smg work without an extractor??  (Started: Mar. 6 2003, 23:59 ET, Last post: Apr. 27 2004, 11:53 ET)
just came to mind.
ok, would THIS be legal?  (Started: Apr. 23 2004, 22:38 ET, Last post: Apr. 26 2004, 21:51 ET)
Para's new power extractor  (Started: Apr. 26 2004, 20:42 ET, Last post: Apr. 26 2004, 20:42 ET)
Need Help With Heat Treating  (Started: Apr. 8 2004, 04:33 ET, Last post: Apr. 25 2004, 15:39 ET)
Percussion cap lock "Mule Ear" sidelock  (Started: Apr. 20 2004, 14:01 ET, Last post: Apr. 25 2004, 12:42 ET)
Seeking prints to make it, or lock maker
wolf ammunition  (Started: Apr. 21 2004, 21:10 ET, Last post: Apr. 25 2004, 11:21 ET)
Problems
45 Auto's  (Started: Apr. 22 2004, 19:52 ET, Last post: Apr. 24 2004, 11:37 ET)
Question for Blindhogg
Gunsmith Tools??..starting out  (Started: Mar. 28 2004, 23:46 ET, Last post: Apr. 23 2004, 20:44 ET)
Shortening a shotgun barrel  (Started: Apr. 23 2004, 15:05 ET, Last post: Apr. 23 2004, 15:05 ET)
Supermatic w/ adjustable choke
Stuck Mauser Bolt  (Started: Apr. 3 2004, 14:50 ET, Last post: Apr. 22 2004, 14:40 ET)
Heat Treat Options?  (Started: Apr. 3 2004, 08:15 ET, Last post: Apr. 22 2004, 12:28 ET)
Metals Sources?  (Started: Apr. 13 2004, 10:52 ET, Last post: Apr. 22 2004, 11:21 ET)
94 Win.  (Started: Apr. 21 2004, 10:51 ET, Last post: Apr. 21 2004, 10:51 ET)
screw size
Barrel shank to bolt face clearance  (Started: Apr. 20 2004, 18:43 ET, Last post: Apr. 20 2004, 18:43 ET)
how to on AMD barrel disassemble  (Started: Apr. 12 2004, 06:31 ET, Last post: Apr. 20 2004, 15:15 ET)
AMD-63 gas block, tube and trunion
Hi-Power trigger job  (Started: Apr. 6 2004, 19:00 ET, Last post: Apr. 20 2004, 14:28 ET)
1911 barrel to slide fitting  (Started: Apr. 12 2004, 02:48 ET, Last post: Apr. 19 2004, 22:43 ET)
GI Springfield Trigger Job  (Started: Apr. 19 2004, 11:22 ET, Last post: Apr. 19 2004, 22:37 ET)
Stoning the track & finding "humps"
AR-15 BARREL WRENCH  (Started: Apr. 5 2004, 11:01 ET, Last post: Apr. 19 2004, 15:31 ET)
DRAWING TO MAKE ONE
Suggestions  (Started: Jan. 29 2004, 13:17 ET, Last post: Apr. 19 2004, 09:25 ET)
Rechambering
would this be legal?  (Started: Apr. 16 2004, 21:10 ET, Last post: Apr. 18 2004, 11:35 ET)
Need firing pin...  (Started: Apr. 17 2004, 01:34 ET, Last post: Apr. 18 2004, 10:33 ET)
For single shot shotgun
winchester model 54  (Started: Apr. 13 2004, 10:08 ET, Last post: Apr. 16 2004, 22:21 ET)
breech bolt
Muzzle crowns  (Started: Jan. 26 2004, 13:36 ET, Last post: Apr. 15 2004, 17:07 ET)
methods of doing so
chamber reamer  (Started: Feb. 8 2004, 17:43 ET, Last post: Apr. 15 2004, 17:03 ET)
pull though or not
Jeweling tools  (Started: Oct. 15 2002, 23:01 ET, Last post: Apr. 15 2004, 16:41 ET)
what do you use?
Barrel shank and thread dimensions  (Started: Apr. 11 2004, 09:43 ET, Last post: Apr. 13 2004, 08:16 ET)
Shot Sizes?  (Started: Apr. 8 2004, 08:20 ET, Last post: Apr. 13 2004, 07:44 ET)
more help with model 66 JC. Higgins?  (Started: Apr. 10 2004, 11:32 ET, Last post: Apr. 10 2004, 14:01 ET)
1911 Project (again)  (Started: Apr. 6 2004, 22:43 ET, Last post: Apr. 10 2004, 07:21 ET)
slide tightening
AR- 15 Bolt Action - Need help  (Started: Apr. 9 2004, 08:45 ET, Last post: Apr. 9 2004, 08:45 ET)
Bolt action AR
Light Gauge Welding  (Started: Apr. 7 2004, 23:06 ET, Last post: Apr. 9 2004, 00:43 ET)
Green Mountain Rifle barrels  (Started: Apr. 8 2004, 15:28 ET, Last post: Apr. 9 2004, 00:10 ET)
Anyone do business directly with them?
wlbrown  (Started: Apr. 4 2004, 12:37 ET, Last post: Apr. 8 2004, 18:53 ET)
357sig?
Jewelling questions  (Started: Mar. 15 2004, 23:20 ET, Last post: Apr. 6 2004, 17:14 ET)
1911  (Started: Apr. 6 2004, 09:54 ET, Last post: Apr. 6 2004, 11:51 ET)
Safari arms slide
1911 sights  (Started: Apr. 2 2004, 21:52 ET, Last post: Apr. 5 2004, 16:25 ET)
KT new slides
Convert 38 S&W to 38 Special?  (Started: Apr. 4 2004, 08:44 ET, Last post: Apr. 5 2004, 10:37 ET)
Is it possible?
Best Starting Mill for Pistol Work?  (Started: Apr. 1 2004, 16:55 ET, Last post: Apr. 3 2004, 03:26 ET)
Rimfire Martini to CenterFire  (Started: Apr. 1 2004, 19:21 ET, Last post: Apr. 2 2004, 13:31 ET)
What constitues "manufacturing"?  (Started: Mar. 31 2004, 00:49 ET, Last post: Apr. 2 2004, 12:59 ET)
Does a build on a reg'd receiver count?
.177 Barrel Blanks?  (Started: Mar. 19 2004, 07:45 ET, Last post: Apr. 2 2004, 10:48 ET)
Win. Mod 12 receiver shank  (Started: Apr. 1 2004, 12:11 ET, Last post: Apr. 1 2004, 14:35 ET)
how to remove it.
Franchi 48ALFeeding Problems  (Started: Nov. 11 2003, 20:20 ET, Last post: Apr. 1 2004, 10:02 ET)
First CAD CAM program.  (Started: Mar. 26 2004, 00:08 ET, Last post: Mar. 31 2004, 14:59 ET)
Advise on CAD CAM software.
info on ar kits and barrell selection  (Started: Mar. 31 2004, 03:43 ET, Last post: Mar. 31 2004, 03:43 ET)
kits/barrells
9 x 23 cartridge on Browning High Power platform  (Started: Mar. 30 2004, 19:56 ET, Last post: Mar. 31 2004, 01:36 ET)
I the High Power a viable platform
AR-15 UPPER CONVERT TO FLATTOP  (Started: Mar. 30 2004, 13:13 ET, Last post: Mar. 30 2004, 21:46 ET)
CONVERT REGULAR UPPER TO FLATTOP
AR guru, help me  (Started: Mar. 25 2004, 23:20 ET, Last post: Mar. 30 2004, 13:54 ET)
S&W 78G .22 Pellet pistol disassembly?  (Started: Mar. 28 2004, 17:51 ET, Last post: Mar. 28 2004, 17:51 ET)
make your own .22 barrel?  (Started: Mar. 27 2004, 20:31 ET, Last post: Mar. 27 2004, 23:58 ET)
Single shot shotgun receiver conversions?  (Started: Mar. 23 2004, 18:25 ET, Last post: Mar. 27 2004, 11:36 ET)
Tool and Die for Gunsmithing?  (Started: Mar. 25 2004, 01:21 ET, Last post: Mar. 25 2004, 14:34 ET)
Winch 1200 Mag Tube Throats  (Started: Mar. 23 2004, 16:41 ET, Last post: Mar. 25 2004, 11:56 ET)
1st 1911 project  (Started: Mar. 21 2004, 23:49 ET, Last post: Mar. 23 2004, 23:52 ET)
Advice from Guru God's welcome
80% frame 1911 build vs. Caspian frame  (Started: Mar. 22 2004, 20:24 ET, Last post: Mar. 23 2004, 18:33 ET)
Best 50 cal. bolt gun  (Started: Feb. 22 2004, 15:05 ET, Last post: Mar. 22 2004, 22:37 ET)
where to get the plans and parts??
Rem bolt handles  (Started: Mar. 13 2004, 23:43 ET, Last post: Mar. 22 2004, 02:11 ET)
silver soldering teqniques
Kel tec P40  (Started: Mar. 13 2004, 18:18 ET, Last post: Mar. 21 2004, 11:52 ET)
safe to fire ?
p17 headspace?  (Started: Mar. 18 2004, 12:40 ET, Last post: Mar. 21 2004, 11:04 ET)
setting headspace
Rechambering a Chrome Lined Barrel  (Started: Mar. 18 2004, 13:11 ET, Last post: Mar. 19 2004, 08:57 ET)
Choosing the proper steel  (Started: Mar. 15 2004, 16:18 ET, Last post: Mar. 19 2004, 02:58 ET)
for a PM11 frame build
ruger#1 barrell to enfeild action  (Started: Mar. 17 2004, 10:34 ET, Last post: Mar. 19 2004, 01:55 ET)
barell retreading
J.C Higgins model 66  (Started: Mar. 16 2004, 22:15 ET, Last post: Mar. 18 2004, 20:42 ET)
Synthetic stock mod
Parker-Hale .308 for M98 (Brno)  (Started: Mar. 17 2004, 20:00 ET, Last post: Mar. 18 2004, 00:14 ET)
Tight bore-solid pilot reamer won't fit
Hammers: 70 vs. 80 Series  (Started: Mar. 16 2004, 19:10 ET, Last post: Mar. 17 2004, 16:07 ET)
What's the difference?
Working on Tapered Barrels  (Started: Mar. 14 2004, 17:00 ET, Last post: Mar. 14 2004, 22:27 ET)
Replacing broken front bead sight  (Started: Mar. 1 2004, 00:22 ET, Last post: Mar. 14 2004, 01:05 ET)
Bulged Barrel  (Started: Mar. 11 2004, 08:57 ET, Last post: Mar. 12 2004, 21:52 ET)
Ruger Red Label fires both barrels!  (Started: Mar. 8 2004, 22:12 ET, Last post: Mar. 11 2004, 00:01 ET)
Romak 3/SSG97  (Started: Mar. 10 2004, 18:48 ET, Last post: Mar. 10 2004, 20:22 ET)
Barrel
sear pin  (Started: Mar. 8 2004, 12:30 ET, Last post: Mar. 10 2004, 05:17 ET)
sear pin keeps working out
stubborn turk barrel  (Started: Mar. 9 2004, 13:29 ET, Last post: Mar. 9 2004, 17:07 ET)
barrel removal
chipped stock  (Started: Mar. 8 2004, 15:23 ET, Last post: Mar. 8 2004, 15:23 ET)
how can i repair
Firing pin removal  (Started: Mar. 7 2004, 16:47 ET, Last post: Mar. 8 2004, 12:57 ET)
Star Modelo
marlin trigger pull  (Started: Mar. 1 2004, 17:28 ET, Last post: Mar. 8 2004, 09:52 ET)
Extractor problem  (Started: Mar. 7 2004, 21:00 ET, Last post: Mar. 8 2004, 00:26 ET)
Preparing to apply Moly Gunkote  (Started: Mar. 5 2004, 09:07 ET, Last post: Mar. 7 2004, 23:14 ET)
coating
1911 Modifications  (Started: Feb. 28 2004, 13:29 ET, Last post: Mar. 7 2004, 20:05 ET)
trigger, sear, grip safety
winchester mod 70  (Started: Mar. 7 2004, 09:25 ET, Last post: Mar. 7 2004, 10:59 ET)
caliber name  (Started: Mar. 6 2004, 15:00 ET, Last post: Mar. 7 2004, 03:41 ET)
shotgun calibers
Bending AK receiver flat  (Started: Mar. 4 2004, 07:01 ET, Last post: Mar. 6 2004, 08:13 ET)
BullPup Plans???  (Started: Mar. 5 2004, 08:34 ET, Last post: Mar. 5 2004, 08:34 ET)
Dragunov Rivets  (Started: Feb. 16 2004, 22:18 ET, Last post: Mar. 4 2004, 22:21 ET)
Where can I find Dragunov Rivets?
Reaming A hole to size  (Started: Feb. 23 2004, 16:24 ET, Last post: Mar. 3 2004, 22:04 ET)
Savage 745 choke size  (Started: Mar. 2 2004, 21:53 ET, Last post: Mar. 3 2004, 10:55 ET)
How can I determine the size of choke?
MAUSER BARREL  (Started: Feb. 25 2004, 22:37 ET, Last post: Mar. 1 2004, 18:58 ET)
Threads and make up
Powers Cutom #1 jig is driving me crazy  (Started: Feb. 28 2004, 20:21 ET, Last post: Feb. 29 2004, 11:03 ET)
difficulty cutting sear angles correctly
win. 94  (Started: Feb. 28 2004, 00:38 ET, Last post: Feb. 28 2004, 15:15 ET)
finger lever
Brownells nickel welding rod  (Started: Feb. 17 2004, 23:01 ET, Last post: Feb. 27 2004, 21:59 ET)
"Staking" a hammer pin on a 1911  (Started: Feb. 26 2004, 18:39 ET, Last post: Feb. 27 2004, 09:37 ET)
What is mean by "staking?"
Remington 514 rebarrel  (Started: Feb. 25 2004, 15:16 ET, Last post: Feb. 27 2004, 01:09 ET)
Ghost ring on a pistol  (Started: Feb. 25 2004, 16:08 ET, Last post: Feb. 25 2004, 16:47 ET)
For hunting?
Government approved Parts kits??  (Started: Feb. 24 2004, 00:03 ET, Last post: Feb. 24 2004, 11:22 ET)
Government approved parts kits??
Need help with charging handle specs  (Started: Feb. 21 2004, 21:04 ET, Last post: Feb. 24 2004, 07:14 ET)
1911 rear sight  (Started: Feb. 20 2004, 11:16 ET, Last post: Feb. 23 2004, 21:03 ET)
how wide is the notch
chamfering clean-up  (Started: Feb. 22 2004, 07:03 ET, Last post: Feb. 23 2004, 09:17 ET)
eliminating chatter marks
Pipe Dream questions for jwh02017  (Started: Feb. 18 2004, 18:28 ET, Last post: Feb. 23 2004, 00:20 ET)
Cetme Build  (Started: Feb. 22 2004, 21:12 ET, Last post: Feb. 22 2004, 22:49 ET)
Pressing Trunion
Ithaca M37 chambers  (Started: Feb. 19 2004, 01:00 ET, Last post: Feb. 22 2004, 12:33 ET)
extractor slot too deep
Bolt Sleeving  (Started: Feb. 16 2004, 17:28 ET, Last post: Feb. 20 2004, 19:25 ET)
Mauser bolt sleeve?
Barrel for Parker Hale Midland Action  (Started: Feb. 20 2004, 17:12 ET, Last post: Feb. 20 2004, 17:12 ET)
How can I coat well an aluminum frame??  (Started: Feb. 16 2004, 19:33 ET, Last post: Feb. 20 2004, 15:51 ET)
I've tried about everything!!
Star 9MM  (Started: Feb. 17 2004, 20:06 ET, Last post: Feb. 20 2004, 15:38 ET)
Trigger will not stay
Barrel profile  (Started: Feb. 14 2004, 05:51 ET, Last post: Feb. 19 2004, 19:48 ET)
Turning down a factory barrel diameter
Fitting NM Bushing  (Started: Feb. 17 2004, 12:27 ET, Last post: Feb. 18 2004, 07:06 ET)
HELP!
anodizing a barrel???  (Started: Feb. 17 2004, 12:56 ET, Last post: Feb. 17 2004, 15:31 ET)
S&W Victory Revolver  (Started: Feb. 17 2004, 12:01 ET, Last post: Feb. 17 2004, 12:01 ET)
need parts info
Computer Question  (Started: Feb. 10 2004, 15:29 ET, Last post: Feb. 16 2004, 19:57 ET)
Cylinder Ring  (Started: Feb. 13 2004, 02:03 ET, Last post: Feb. 16 2004, 19:12 ET)
Newb Question  (Started: Feb. 16 2004, 16:09 ET, Last post: Feb. 16 2004, 16:09 ET)
Gas tube
savage 99 trigger job  (Started: Feb. 8 2004, 17:36 ET, Last post: Feb. 16 2004, 13:00 ET)
Possible problem, need suggestions!  (Started: Feb. 15 2004, 10:14 ET, Last post: Feb. 16 2004, 11:35 ET)
HK SL-8  (Started: Feb. 15 2004, 20:22 ET, Last post: Feb. 15 2004, 20:22 ET)
trigger tune
headspace versus accuracy  (Started: Feb. 14 2004, 14:46 ET, Last post: Feb. 15 2004, 12:23 ET)
Broken Ruger !!!!  (Started: Feb. 13 2004, 10:42 ET, Last post: Feb. 14 2004, 12:40 ET)
Original style .44 mag. Carbine.
Expanding the magazine box in a Sako Vixen  (Started: Feb. 14 2004, 00:54 ET, Last post: Feb. 14 2004, 00:54 ET)
Browning Models 53 and 92  (Started: Feb. 13 2004, 23:39 ET, Last post: Feb. 13 2004, 23:39 ET)
Is this normal for a .22 revolver?  (Started: Feb. 10 2004, 00:00 ET, Last post: Feb. 13 2004, 10:26 ET)
heavy leading in forcing cone/barrel
Tap / drill bit size?  (Started: Feb. 12 2004, 00:28 ET, Last post: Feb. 12 2004, 23:47 ET)
AK build
Installing iron sites on bolt action-help-  (Started: Feb. 12 2004, 10:22 ET, Last post: Feb. 12 2004, 23:23 ET)
handgun laws  (Started: Feb. 11 2004, 16:07 ET, Last post: Feb. 11 2004, 21:21 ET)
lay them out
What exactly is LW-50 steel?  (Started: Feb. 10 2004, 12:36 ET, Last post: Feb. 10 2004, 21:11 ET)
Lothar Walther 50 rifle barrel chemistry
Mauser FR-8 Muzzle Threads  (Started: Feb. 10 2004, 10:54 ET, Last post: Feb. 10 2004, 11:30 ET)
Heat treat specs  (Started: Feb. 6 2004, 23:54 ET, Last post: Feb. 9 2004, 22:44 ET)
Intratec Protec 25 Field Strip  (Started: Feb. 9 2004, 20:30 ET, Last post: Feb. 9 2004, 20:30 ET)
Slide stop won't go in  (Started: Feb. 9 2004, 13:54 ET, Last post: Feb. 9 2004, 17:24 ET)
bottom lug in the way
Headspace on 45 ACP  (Started: Feb. 9 2004, 07:25 ET, Last post: Feb. 9 2004, 16:30 ET)
1911 front strap  (Started: Feb. 7 2004, 01:51 ET, Last post: Feb. 9 2004, 16:15 ET)
PPK Sliide hold open?  (Started: Feb. 9 2004, 13:21 ET, Last post: Feb. 9 2004, 13:21 ET)
My First Welding Job  (Started: Feb. 3 2004, 08:07 ET, Last post: Feb. 9 2004, 08:38 ET)
Mannlicher M95, .223 Rem?  (Started: Feb. 8 2004, 15:06 ET, Last post: Feb. 9 2004, 01:23 ET)
Mannlicher 1895 .223 Rem conversion
Cutting 1911 rails  (Started: Feb. 8 2004, 14:32 ET, Last post: Feb. 8 2004, 22:13 ET)
What are the dimensions?
Remington 700 SA Receiver/Bolt  (Started: Feb. 8 2004, 15:08 ET, Last post: Feb. 8 2004, 15:08 ET)
Remington 700 SA Receiver/Bolt
Causes for a stuck case  (Started: Feb. 6 2004, 11:16 ET, Last post: Feb. 7 2004, 20:02 ET)
I need tap tips  (Started: Jan. 25 2004, 18:26 ET, Last post: Feb. 6 2004, 21:40 ET)
Electric welding mauser bolt handles  (Started: Nov. 26 2003, 12:19 ET, Last post: Feb. 5 2004, 12:57 ET)
need advice
Receiver material question?  (Started: Feb. 3 2004, 22:42 ET, Last post: Feb. 4 2004, 21:50 ET)
for my new project
SMLE one piece stocks  (Started: Jan. 27 2004, 20:55 ET, Last post: Feb. 4 2004, 18:23 ET)
ANOTHER WELDING QUESTION  (Started: Feb. 3 2004, 16:55 ET, Last post: Feb. 4 2004, 11:41 ET)
HOW MUCH TROUBLE AM I IN FOR?
Hammer slot on 1911  (Started: Feb. 1 2004, 23:37 ET, Last post: Feb. 2 2004, 20:11 ET)
What tool(s) to use?
short barrel m1  (Started: Feb. 2 2004, 20:02 ET, Last post: Feb. 2 2004, 20:02 ET)
insalling short barrel on m1 thompson
Available Metal Finishes  (Started: Feb. 1 2004, 16:51 ET, Last post: Feb. 1 2004, 21:56 ET)
what's available? how to apply it?
benchdrill for 1911?  (Started: Feb. 1 2004, 01:23 ET, Last post: Feb. 1 2004, 01:23 ET)
will it work, how?
ambi safety on 1911  (Started: Jan. 30 2004, 21:11 ET, Last post: Jan. 31 2004, 20:55 ET)
gunsmithing
1911 Chamber dimension  (Started: Jan. 30 2004, 22:49 ET, Last post: Jan. 30 2004, 23:34 ET)
what does book say
OK so a mauser is out, how about this?  (Started: Dec. 3 2003, 23:52 ET, Last post: Jan. 30 2004, 23:18 ET)
I'll get a .223 outa here yet!
Enlarging a Barrel Channel  (Started: Jan. 30 2004, 21:48 ET, Last post: Jan. 30 2004, 22:04 ET)
Stock Work
color case hardening  (Started: Jan. 23 2004, 23:12 ET, Last post: Jan. 30 2004, 12:09 ET)
case hrdng recievers?
Help Indentify this Slide  (Started: Jan. 30 2004, 07:08 ET, Last post: Jan. 30 2004, 12:07 ET)
registering home-built pistols  (Started: Jan. 24 2004, 06:57 ET, Last post: Jan. 30 2004, 02:04 ET)
Do you have to?
Essex slide / frame fitting  (Started: Jan. 15 2004, 14:50 ET, Last post: Jan. 29 2004, 22:48 ET)
Too tight fit starting out
Mauser barrels from FAC  (Started: Jan. 28 2004, 12:29 ET, Last post: Jan. 28 2004, 18:41 ET)
rebarel  mausr 88 in .45 or .38  (Started: Jan. 28 2004, 18:37 ET, Last post: Jan. 28 2004, 18:37 ET)
beer can mortar  (Started: Jan. 27 2004, 23:45 ET, Last post: Jan. 27 2004, 23:45 ET)
amount of BP
Moving Serial Number  (Started: Jan. 20 2004, 02:10 ET, Last post: Jan. 27 2004, 21:40 ET)
What's the diference with FAL/G1 barrels  (Started: Jan. 27 2004, 03:13 ET, Last post: Jan. 27 2004, 17:14 ET)
they interchangable? how dif's a heavy
.416 WSM  (Started: Jan. 26 2004, 19:00 ET, Last post: Jan. 27 2004, 11:47 ET)
Wildcat without buying a custom reamer
.22 mag reamer  (Started: Jan. 21 2004, 20:43 ET, Last post: Jan. 24 2004, 22:12 ET)
Semi-Auto Lockwork  (Started: Jan. 14 2004, 22:11 ET, Last post: Jan. 24 2004, 18:15 ET)
Century R1A1 blueprints  (Started: Jan. 22 2004, 10:53 ET, Last post: Jan. 22 2004, 17:57 ET)
Searched all the obvious places
files and stones  (Started: Jan. 15 2004, 14:21 ET, Last post: Jan. 19 2004, 23:03 ET)
Remington model 740 ejector  (Started: Jan. 10 2004, 22:08 ET, Last post: Jan. 19 2004, 11:49 ET)
Ejector uninstalls itself
Rimfire chamber depth  (Started: Jan. 12 2004, 09:13 ET, Last post: Jan. 16 2004, 00:33 ET)
Star model PD help needed.  (Started: Jan. 6 2004, 16:09 ET, Last post: Jan. 15 2004, 03:22 ET)
Compensator on a post-ban  (Started: Jan. 10 2004, 18:06 ET, Last post: Jan. 14 2004, 22:52 ET)
legal installation on a threaded barrel
Gun show .17 cal barrel  (Started: Jan. 13 2004, 17:19 ET, Last post: Jan. 13 2004, 22:01 ET)
Can you help Identify?
JB Weld and Hot Bluing  (Started: Jan. 12 2004, 13:42 ET, Last post: Jan. 13 2004, 02:53 ET)
Any problems I might encounter?
38 Super slide  (Started: Jan. 8 2004, 19:54 ET, Last post: Jan. 12 2004, 23:15 ET)
10MM Barrel in 38 Super slide
Can a .22lr bolt lock on just the handle?  (Started: Dec. 31 2003, 00:12 ET, Last post: Jan. 12 2004, 18:58 ET)
barrel rechamber question  (Started: Mar. 20 2003, 22:57 ET, Last post: Jan. 11 2004, 14:56 ET)
Rifle or Carbine in 32acp?  (Started: Jan. 8 2004, 00:19 ET, Last post: Jan. 11 2004, 01:06 ET)
Large hole lower + small hole upper....  (Started: Dec. 3 2003, 15:26 ET, Last post: Jan. 10 2004, 21:31 ET)
how to machine the upper?
A Mauser Question  (Started: Dec. 23 2003, 03:06 ET, Last post: Jan. 10 2004, 20:57 ET)
Rebarreling/5
browning automatic rifle  (Started: Dec. 14 2003, 19:44 ET, Last post: Jan. 10 2004, 20:05 ET)
web page
3D drawing or cad program?  (Started: Dec. 15 2003, 17:45 ET, Last post: Jan. 9 2004, 03:22 ET)
Blow back semi auto?  (Started: Jan. 7 2004, 12:49 ET, Last post: Jan. 9 2004, 00:38 ET)
tech. question
Minimum safe diameter  (Started: Jan. 7 2004, 11:55 ET, Last post: Jan. 8 2004, 20:42 ET)
of a surplus M2 .50 barrel
Need help removing tooling marks  (Started: Jan. 5 2004, 01:52 ET, Last post: Jan. 7 2004, 11:22 ET)
4140 steel alloy
Win single shot shotgun dissassembly  (Started: Jan. 6 2004, 20:41 ET, Last post: Jan. 7 2004, 11:18 ET)
How do I take a Win 370 apart?
Astra Frame  (Started: Jan. 6 2004, 18:42 ET, Last post: Jan. 6 2004, 18:42 ET)
Astra A-80 9mm Frame needed
50 oz hand gun  (Started: Jan. 3 2004, 18:06 ET, Last post: Jan. 6 2004, 17:15 ET)
smith and wesson 500
Pistol Caliber Bolt Action  (Started: Dec. 25 2003, 19:54 ET, Last post: Jan. 5 2004, 19:28 ET)
1911 machining question...  (Started: Jan. 5 2004, 11:36 ET, Last post: Jan. 5 2004, 15:36 ET)
Changing caliber  (Started: Jan. 5 2004, 05:46 ET, Last post: Jan. 5 2004, 10:05 ET)
Choke Reaming  (Started: Dec. 22 2003, 16:45 ET, Last post: Jan. 3 2004, 12:35 ET)
Tig welding steel  (Started: Dec. 31 2003, 15:16 ET, Last post: Jan. 2 2004, 23:46 ET)
DORN'S MAGAZINE TUBE/BARREL SUPPORT BLOCK TOOL  (Started: Dec. 31 2003, 22:47 ET, Last post: Dec. 31 2003, 22:47 ET)
TOOL QUESTUIN
Finding absolute "Top-Dead-Center" on barrel  (Started: Dec. 30 2003, 22:38 ET, Last post: Dec. 31 2003, 21:06 ET)
drilling & tapping for mounting sights
Trigger job how to?  (Started: Dec. 26 2003, 20:50 ET, Last post: Dec. 26 2003, 20:50 ET)
S&W double action
cut down 20"barrel to 16"  (Started: Dec. 25 2003, 16:22 ET, Last post: Dec. 26 2003, 11:24 ET)
threading for m1 garand  (Started: Dec. 22 2003, 21:35 ET, Last post: Dec. 22 2003, 23:18 ET)
threading
bull barrel on full size frame /officers slide  (Started: Dec. 22 2003, 12:17 ET, Last post: Dec. 22 2003, 12:17 ET)
dummy bren question  (Started: Dec. 14 2003, 11:14 ET, Last post: Dec. 17 2003, 09:15 ET)
50 cal  (Started: Dec. 17 2003, 01:42 ET, Last post: Dec. 17 2003, 01:42 ET)
plans
sten springs  (Started: Dec. 15 2003, 20:43 ET, Last post: Dec. 16 2003, 09:39 ET)
Anyone ever bent their own wire buttstock?  (Started: Dec. 11 2003, 00:55 ET, Last post: Dec. 12 2003, 18:29 ET)
ramped barrel for 1911  (Started: Dec. 10 2003, 13:28 ET, Last post: Dec. 11 2003, 15:31 ET)
Winchester 670  (Started: Dec. 11 2003, 14:29 ET, Last post: Dec. 11 2003, 14:29 ET)
any Win men out there?
Nylon-66 frames  (Started: Dec. 11 2003, 12:47 ET, Last post: Dec. 11 2003, 13:09 ET)
handgun frames made of nylon
New type of frame castings  (Started: Dec. 11 2003, 10:06 ET, Last post: Dec. 11 2003, 12:21 ET)
Anyone know what are these for?
Fire damage  (Started: Dec. 6 2003, 19:34 ET, Last post: Dec. 11 2003, 09:11 ET)
Sad....
S&W M19 disassembly help  (Started: Dec. 5 2003, 21:14 ET, Last post: Dec. 10 2003, 17:16 ET)
1909 Argentine Recommended Caliber  (Started: Nov. 20 2003, 21:57 ET, Last post: Dec. 10 2003, 15:43 ET)
Which one??
how to convert  (Started: Dec. 9 2003, 23:56 ET, Last post: Dec. 10 2003, 06:20 ET)
What the best ignition for blackpowder?  (Started: Dec. 8 2003, 14:09 ET, Last post: Dec. 9 2003, 16:47 ET)
Lightening my trigger pull  (Started: Dec. 4 2003, 13:33 ET, Last post: Dec. 9 2003, 16:13 ET)
Question about steels & welding
Band front sight base  (Started: Dec. 6 2003, 01:05 ET, Last post: Dec. 7 2003, 10:55 ET)
barrel band slig swivel
44 mag bore diameter  (Started: Dec. 7 2003, 09:38 ET, Last post: Dec. 7 2003, 10:35 ET)
gunsmith education  (Started: Dec. 3 2003, 18:36 ET, Last post: Dec. 7 2003, 08:45 ET)
education
300 whisper...in a handy rifle...  (Started: Dec. 2 2003, 19:38 ET, Last post: Dec. 5 2003, 19:52 ET)
timmey trigger  (Started: Dec. 4 2003, 20:20 ET, Last post: Dec. 5 2003, 18:40 ET)
installing
Which beavertail for a Springfield Armory 1911  (Started: Dec. 5 2003, 10:59 ET, Last post: Dec. 5 2003, 13:19 ET)
Full auto BB gun  (Started: Dec. 1 2003, 00:52 ET, Last post: Dec. 2 2003, 16:18 ET)
Aircompressor or Fire Extinguisher fed
hello from the new guy with a ??  (Started: Dec. 1 2003, 20:44 ET, Last post: Dec. 2 2003, 09:20 ET)
S&W 29 Smith recommendation
Need help with Taurus 92C (Beretta clone)  (Started: Dec. 1 2003, 02:11 ET, Last post: Dec. 1 2003, 20:35 ET)
Homade optics  (Started: Nov. 29 2003, 02:41 ET, Last post: Nov. 30 2003, 23:29 ET)
Has anyone made there own optics?
Peruvian 1909  (Started: Nov. 11 2003, 18:58 ET, Last post: Nov. 30 2003, 01:06 ET)
Which bolts will work for sporter?
Borescope  (Started: Nov. 29 2003, 02:45 ET, Last post: Nov. 29 2003, 17:09 ET)
Anyone made one?
Ithica Model 49  (Started: Nov. 27 2003, 00:44 ET, Last post: Nov. 29 2003, 00:52 ET)
Anyone with Info
1911 .22 CONVERSION, HOME BUILT  (Started: Nov. 12 2003, 00:03 ET, Last post: Nov. 28 2003, 23:59 ET)
Has anyone built a .22 conv. like Ceiner
building a cut down ar15 w/6.5 barrel  (Started: Nov. 26 2003, 02:03 ET, Last post: Nov. 28 2003, 21:36 ET)
SKS stock removal  (Started: Nov. 28 2003, 14:36 ET, Last post: Nov. 28 2003, 15:06 ET)
stock screw removal problem
50 BMG Headspacing Puzzle  (Started: Nov. 27 2003, 09:10 ET, Last post: Nov. 27 2003, 19:38 ET)
Headspace & 22's  (Started: Nov. 7 2003, 07:02 ET, Last post: Nov. 27 2003, 01:09 ET)
03A3 Springfield Scout  (Started: Nov. 25 2003, 18:52 ET, Last post: Nov. 26 2003, 20:21 ET)
Gov't vs Comm.....7 pics  (Started: Jan. 15 2002, 23:07 ET, Last post: Nov. 25 2003, 18:24 ET)
Single Shot 9mm Pistol  (Started: Nov. 24 2003, 18:48 ET, Last post: Nov. 25 2003, 09:52 ET)
Mounting a Scope
Whats the dia  (Started: Nov. 21 2003, 17:00 ET, Last post: Nov. 25 2003, 06:09 ET)
on ,22 WMR.
Carbon fiber tubing?  (Started: Nov. 11 2003, 01:34 ET, Last post: Nov. 24 2003, 01:20 ET)
Where do you find this stuff at?
Springfield 5100 sxs 16 ga.  (Started: Nov. 20 2003, 19:04 ET, Last post: Nov. 23 2003, 20:28 ET)
Pits or breakout around one firing pin h
DP-28  (Started: Nov. 22 2003, 16:55 ET, Last post: Nov. 22 2003, 16:55 ET)
Receiver Blueprints
Romanian .22 Training rifle  (Started: Nov. 14 2003, 22:58 ET, Last post: Nov. 22 2003, 01:11 ET)
Extraction problems
Front Sight Question  (Started: Nov. 20 2003, 18:15 ET, Last post: Nov. 21 2003, 10:07 ET)
Size of screw
HELP how to determan what calaber  (Started: Nov. 7 2003, 14:13 ET, Last post: Nov. 21 2003, 01:29 ET)
Chrome Lined Barrels  (Started: Nov. 13 2003, 23:57 ET, Last post: Nov. 18 2003, 07:23 ET)
Recommendation on drill jig  (Started: Nov. 16 2003, 20:03 ET, Last post: Nov. 17 2003, 14:52 ET)
Building Contender and Encore Barrels  (Started: Oct. 27 2003, 18:01 ET, Last post: Nov. 17 2003, 12:04 ET)
Sight mounting  (Started: Nov. 12 2003, 20:35 ET, Last post: Nov. 14 2003, 12:44 ET)
How do you do it?
41L40 heat treat?  (Started: Nov. 12 2003, 12:46 ET, Last post: Nov. 12 2003, 22:48 ET)
Shop built contender barrels  (Started: Nov. 11 2003, 19:03 ET, Last post: Nov. 12 2003, 09:52 ET)
Do lugs need to be welded on or is bol..
cast frame revolver  (Started: Nov. 9 2003, 03:47 ET, Last post: Nov. 11 2003, 19:03 ET)
22 mag scratch build
Bolt project  (Started: Nov. 4 2003, 12:33 ET, Last post: Nov. 11 2003, 13:35 ET)
Requiring criticism for bolt design
rimfire magnum bolt actions  (Started: Nov. 10 2003, 12:36 ET, Last post: Nov. 10 2003, 12:36 ET)
blueprints
1911 platform.400 corbon  (Started: Nov. 10 2003, 01:18 ET, Last post: Nov. 10 2003, 11:13 ET)
What frame?
Need black cold dunk finish for metal parts  (Started: Nov. 8 2003, 00:19 ET, Last post: Nov. 8 2003, 23:07 ET)
Metal finishes
50BMG project  (Started: Nov. 4 2003, 13:05 ET, Last post: Nov. 8 2003, 02:13 ET)
A few questions
whats an easier weld project?  (Started: Nov. 7 2003, 15:16 ET, Last post: Nov. 7 2003, 15:16 ET)
mac or ak
EAA Witness Caliber Change  (Started: Nov. 5 2003, 01:23 ET, Last post: Nov. 6 2003, 00:47 ET)
9X21 re-chamber to 357Sig
Mauser barrel removal  (Started: Oct. 31 2003, 17:31 ET, Last post: Nov. 4 2003, 23:21 ET)
How
Remington 742 Feeding Problems  (Started: Oct. 28 2003, 18:44 ET, Last post: Nov. 3 2003, 18:30 ET)
Gunsmithing
arminius cylinder  (Started: Oct. 27 2003, 01:08 ET, Last post: Nov. 2 2003, 22:04 ET)
where to find them?
M1 Garand  (Started: Oct. 31 2003, 19:53 ET, Last post: Nov. 2 2003, 00:25 ET)
building a Garand from a kit
Compensator Removal/Installation  (Started: Oct. 31 2003, 15:55 ET, Last post: Oct. 31 2003, 15:55 ET)
How to...?
Rem 700 only holds 2 shells!?!  (Started: Oct. 29 2003, 22:46 ET, Last post: Oct. 30 2003, 22:03 ET)
7mm Mag magazine only fits 2 shells
Charles Daly  (Started: Oct. 27 2003, 18:39 ET, Last post: Oct. 27 2003, 18:39 ET)
Browning parts
Building a single shot rimfire action?  (Started: Sep. 16 2003, 21:43 ET, Last post: Oct. 27 2003, 08:19 ET)
rolling, falling, or bolt action????
How much headspace  (Started: Oct. 18 2003, 23:46 ET, Last post: Oct. 27 2003, 01:13 ET)
Winchester barrel  (Started: Oct. 24 2003, 12:42 ET, Last post: Oct. 24 2003, 19:44 ET)
Models 92 and 94 barrel
Extractor cut depth  (Started: Sep. 23 2003, 08:43 ET, Last post: Oct. 23 2003, 02:24 ET)
Hornet turnable?
Building a falling block action  (Started: Oct. 5 2003, 10:51 ET, Last post: Oct. 23 2003, 02:20 ET)
How thin can a barrel get?  (Started: Oct. 18 2003, 23:50 ET, Last post: Oct. 21 2003, 12:53 ET)
Minimum diameter of a 7.62X39 barrel
Sporterizing a Yugo M24 Mauser  (Started: Sep. 29 2003, 01:09 ET, Last post: Oct. 18 2003, 23:49 ET)
Which Mauser parts fit the M24?
Turkish Mauser  (Started: Sep. 7 2003, 11:46 ET, Last post: Oct. 18 2003, 23:25 ET)
Commercial Manufacturing  (Started: Oct. 15 2003, 12:37 ET, Last post: Oct. 16 2003, 05:52 ET)
....the dream continues.....
Barrel thread on a S&W revolver  (Started: Oct. 13 2003, 22:40 ET, Last post: Oct. 15 2003, 21:00 ET)
Need to resurrect an old friend
low-cost smithy  (Started: Oct. 15 2003, 01:45 ET, Last post: Oct. 15 2003, 09:31 ET)
best tools on a budget
to file or dremel?  (Started: Oct. 12 2003, 13:34 ET, Last post: Oct. 15 2003, 09:23 ET)
SKS to AK mag conversion problems
a new challenge  (Started: Oct. 8 2003, 19:10 ET, Last post: Oct. 14 2003, 19:04 ET)
home made smokeless
Dlask 80%  (Started: Oct. 11 2003, 20:27 ET, Last post: Oct. 13 2003, 17:18 ET)
worthwhile
S&W model 10  (Started: Sep. 29 2003, 00:20 ET, Last post: Oct. 6 2003, 19:49 ET)
nothing will work
heeeelp  (Started: Oct. 5 2003, 17:36 ET, Last post: Oct. 5 2003, 23:28 ET)
stuck round
casehardening  (Started: Jul. 22 2003, 01:12 ET, Last post: Oct. 3 2003, 07:30 ET)
will this work?
Questions on AR Barrels. fitting etc  (Started: Oct. 2 2003, 18:24 ET, Last post: Oct. 3 2003, 07:21 ET)
cutting chambers,fitting extension?
Smooth Side M16 Questions.  (Started: Sep. 29 2003, 20:35 ET, Last post: Oct. 1 2003, 18:46 ET)
I'm Looking For Help With A Project
easiest stainless alloy to weld?  (Started: Sep. 28 2003, 23:57 ET, Last post: Sep. 30 2003, 16:48 ET)
yet another sadistic project from GAU-2
barrel blocks  (Started: Sep. 29 2003, 20:33 ET, Last post: Sep. 29 2003, 20:33 ET)
long range rifles
Ring in rifling  (Started: Sep. 24 2003, 16:13 ET, Last post: Sep. 29 2003, 15:02 ET)
what is it.
barrel blanks  (Started: Sep. 28 2003, 12:25 ET, Last post: Sep. 29 2003, 08:45 ET)
Where to get one?
Just starting out.  (Started: Sep. 28 2003, 11:45 ET, Last post: Sep. 29 2003, 08:45 ET)
Cutting tool for 22lr  (Started: Sep. 26 2003, 01:43 ET, Last post: Sep. 27 2003, 00:59 ET)
tip off grooves
Bouler special. side by side  (Started: Sep. 26 2003, 12:04 ET, Last post: Sep. 26 2003, 12:04 ET)
Help! †Stahl barells.
6.5x284  (Started: Sep. 18 2003, 16:00 ET, Last post: Sep. 24 2003, 20:20 ET)
Chambering
'03-A3 rebarrel job  (Started: Sep. 15 2003, 00:27 ET, Last post: Sep. 24 2003, 10:41 ET)
Graphite Lube  (Started: Aug. 30 2003, 08:40 ET, Last post: Sep. 22 2003, 20:30 ET)
Whats the difference between 70/80/90  (Started: Sep. 6 2003, 07:30 ET, Last post: Sep. 21 2003, 01:35 ET)
amatuer 1911-??
Uberti Henry  (Started: Sep. 14 2003, 10:53 ET, Last post: Sep. 18 2003, 10:45 ET)
need help
Mosin-Nagant rifle  (Started: Sep. 16 2003, 14:22 ET, Last post: Sep. 17 2003, 08:18 ET)
trigger job
martini action rebarrel  (Started: Sep. 15 2003, 19:19 ET, Last post: Sep. 16 2003, 21:32 ET)
Savage 99  (Started: Aug. 29 2003, 17:47 ET, Last post: Sep. 16 2003, 17:44 ET)
Where to find books and videos
Steel Shotgun Barrel Rib  (Started: Sep. 8 2003, 12:02 ET, Last post: Sep. 14 2003, 10:42 ET)
For a Remingtion Model 11
9mm. Mac 10 queston  (Started: Aug. 30 2003, 22:08 ET, Last post: Sep. 13 2003, 19:59 ET)
Anyone Heard of Henry Goodman  (Started: Sep. 12 2003, 13:20 ET, Last post: Sep. 12 2003, 20:06 ET)
Number/Letter Stamping  (Started: Sep. 9 2003, 20:57 ET, Last post: Sep. 9 2003, 21:21 ET)
HOWTO?
AR10 takedown detent screwup?  (Started: Jul. 24 2003, 12:17 ET, Last post: Sep. 9 2003, 13:13 ET)
Any ideas
Wanting to biuld a take down rifle  (Started: Aug. 15 2003, 19:46 ET, Last post: Sep. 9 2003, 10:44 ET)
Where to have a silencer made  (Started: Aug. 30 2003, 12:06 ET, Last post: Sep. 9 2003, 08:24 ET)
Silencer
"easier" completion of ar lower  (Started: Sep. 7 2003, 17:06 ET, Last post: Sep. 7 2003, 18:04 ET)
300 Whisper Gauges  (Started: Sep. 6 2003, 19:10 ET, Last post: Sep. 6 2003, 21:48 ET)
Material for .50 caliber  (Started: Sep. 1 2003, 10:47 ET, Last post: Sep. 5 2003, 20:17 ET)
Colt 1903 .32  (Started: Aug. 30 2003, 01:54 ET, Last post: Sep. 4 2003, 14:11 ET)
Hammerless
How to install a tactical bolt knob  (Started: Sep. 3 2003, 11:45 ET, Last post: Sep. 3 2003, 16:08 ET)
Remington 700
.22 feeding ramp dimensions  (Started: Aug. 31 2003, 06:02 ET, Last post: Sep. 2 2003, 18:06 ET)
cold shot blues  (Started: Aug. 26 2003, 13:17 ET, Last post: Sep. 1 2003, 20:59 ET)
7.7 jap, what's wrong?
80% frames  (Started: Aug. 26 2003, 19:23 ET, Last post: Aug. 30 2003, 00:04 ET)
500 S&W  (Started: Aug. 25 2003, 21:38 ET, Last post: Aug. 26 2003, 04:05 ET)
blueprint  (Started: Aug. 25 2003, 19:57 ET, Last post: Aug. 25 2003, 19:57 ET)
ar7
Mini Guns?  (Started: Aug. 19 2003, 19:34 ET, Last post: Aug. 25 2003, 18:10 ET)
How to polish reciver?  (Started: Aug. 22 2003, 13:58 ET, Last post: Aug. 24 2003, 11:57 ET)
Polish/Stone Mauser receiver
It REALLY helps your hitting speed  (Started: Jul. 27 2003, 10:26 ET, Last post: Aug. 22 2003, 13:28 ET)
if your pistol grip is extended, etc,
Remington 600 Bolt  (Started: Aug. 21 2003, 00:43 ET, Last post: Aug. 21 2003, 00:43 ET)
Change a spring
Where to start?  (Started: Aug. 16 2003, 01:47 ET, Last post: Aug. 19 2003, 19:09 ET)
Stevens okay w/ modern Nitro loads?  (Started: Aug. 2 2003, 15:48 ET, Last post: Aug. 15 2003, 19:15 ET)
Converting an old lee enfiled to .45acp  (Started: Jan. 16 2003, 13:31 ET, Last post: Aug. 15 2003, 10:18 ET)
just what the topic says
Experience, thoughts, pig tail gastibe, CAR  (Started: May 12 2003, 10:31 ET, Last post: Aug. 14 2003, 21:12 ET)
223? The idea is giving the short barrel
Fix My Remington 513 Safety  (Started: Aug. 8 2003, 22:17 ET, Last post: Aug. 14 2003, 19:22 ET)
I don't want to shoot myself!
aluminum frame strength  (Started: Aug. 1 2003, 12:01 ET, Last post: Aug. 14 2003, 12:09 ET)
How much stress will it itake
AR15 Barrel Gas Port  (Started: Apr. 9 2003, 23:59 ET, Last post: Aug. 9 2003, 20:49 ET)
Dimension(diameter) of Gas Port
Remigton model 10 shotgun  (Started: Aug. 8 2003, 16:10 ET, Last post: Aug. 8 2003, 16:10 ET)
Action bar lock button
bolt  (Started: Aug. 7 2003, 20:23 ET, Last post: Aug. 8 2003, 13:52 ET)
mac or cobray
Remigton model 10 shotgun  (Started: Aug. 6 2003, 16:32 ET, Last post: Aug. 6 2003, 16:32 ET)
Bolt
G1 barrel  (Started: Aug. 5 2003, 22:04 ET, Last post: Aug. 5 2003, 22:04 ET)
what is the groove dia
Hot or Cold??  (Started: Jul. 31 2003, 18:19 ET, Last post: Aug. 3 2003, 14:33 ET)
colt police positive  (Started: Aug. 1 2003, 20:34 ET, Last post: Aug. 2 2003, 09:51 ET)
bolt screw size
Parkerizing revolver internal parts  (Started: Jul. 25 2003, 17:40 ET, Last post: Aug. 2 2003, 08:57 ET)
refinishing
Metallurgy question  (Started: Jun. 15 2003, 17:07 ET, Last post: Jul. 31 2003, 19:52 ET)
Anyone here have both an AR & access to  (Started: Jul. 17 2003, 22:59 ET, Last post: Jul. 30 2003, 17:41 ET)
an electronic shooting-timer?
Stuck Breech  (Started: Jul. 27 2003, 03:47 ET, Last post: Jul. 30 2003, 11:12 ET)
Remington Black Powder Rifle
Spring Weights  (Started: Jul. 29 2003, 15:44 ET, Last post: Jul. 29 2003, 22:08 ET)
determining
Adjusting lathe tailstock height?  (Started: Jun. 20 2003, 10:28 ET, Last post: Jul. 28 2003, 16:51 ET)
building a Form 1 suppressor
8mm06  (Started: Jul. 24 2003, 17:56 ET, Last post: Jul. 27 2003, 00:59 ET)
Mini, and new mags  (Started: Jul. 25 2003, 09:00 ET, Last post: Jul. 25 2003, 11:03 ET)
turkish mauser  (Started: Jul. 22 2003, 21:35 ET, Last post: Jul. 24 2003, 19:48 ET)
which barrels
Which Steel for model cannon barrels  (Started: Jun. 26 2003, 12:54 ET, Last post: Jul. 23 2003, 05:16 ET)
need an ejector for sweidh mausser  (Started: Jul. 21 2003, 19:57 ET, Last post: Jul. 23 2003, 03:47 ET)
Barrel for M48 Yugo Mauser Action  (Started: Jul. 20 2003, 19:25 ET, Last post: Jul. 21 2003, 13:20 ET)
7-shot  (Started: Jul. 20 2003, 10:18 ET, Last post: Jul. 20 2003, 23:42 ET)
cylinder
Question on a P-228 blueprint?  (Started: Feb. 15 2003, 12:26 ET, Last post: Jul. 20 2003, 11:27 ET)
Have I Screwed UP!!  (Started: Jul. 16 2003, 16:48 ET, Last post: Jul. 18 2003, 09:18 ET)
Fininshing a 1911 frame to 80%  (Started: Jul. 13 2003, 18:07 ET, Last post: Jul. 16 2003, 10:00 ET)
Need a Gunsmith?
S&W extractor repair/  (Started: Jul. 7 2003, 17:49 ET, Last post: Jul. 10 2003, 17:37 ET)
brazing? the extractor
Lapping Compound  (Started: Jun. 20 2003, 11:48 ET, Last post: Jul. 9 2003, 08:17 ET)
Removing...
Using end mill bit for 1911 rails  (Started: Apr. 24 2002, 02:42 ET, Last post: Jul. 9 2003, 08:14 ET)
Rechamber 8mm to 8mm-06  (Started: Jun. 25 2003, 15:35 ET, Last post: Jul. 7 2003, 20:25 ET)
Marlin Model 88 .22LR  (Started: Jul. 7 2003, 11:50 ET, Last post: Jul. 7 2003, 13:12 ET)
Need some help
N frame endshake/headspace  (Started: Jun. 23 2003, 13:49 ET, Last post: Jun. 24 2003, 23:06 ET)
S&W revolver headspace ?
shotgun barrel bending  (Started: Jun. 20 2003, 18:17 ET, Last post: Jun. 23 2003, 20:50 ET)
FNG looking for PPK/S frame casting  (Started: Jun. 17 2003, 21:36 ET, Last post: Jun. 20 2003, 22:34 ET)
striking out with google
Mac-11 9mm  (Started: Jun. 14 2003, 16:53 ET, Last post: Jun. 14 2003, 19:58 ET)
barrel specs
Marlin 783 won't eject  (Started: Jun. 14 2003, 17:27 ET, Last post: Jun. 14 2003, 19:40 ET)
.45 super in a s&w 1917  (Started: Jun. 13 2003, 12:31 ET, Last post: Jun. 14 2003, 15:46 ET)
source for front sight  (Started: Jun. 10 2003, 14:34 ET, Last post: Jun. 12 2003, 22:02 ET)
broke tenon off, need a new one
Front sight  (Started: Jun. 7 2003, 16:53 ET, Last post: Jun. 11 2003, 21:36 ET)
New Guy has a question Pls  (Started: Jun. 7 2003, 13:34 ET, Last post: Jun. 9 2003, 00:55 ET)
How to begin?
1800's colt navy(army) revolver's  (Started: Jun. 6 2003, 05:49 ET, Last post: Jun. 6 2003, 21:50 ET)
no replicas..looking for blueprints.????
simplest semi-auto handgun  (Started: Jan. 10 2003, 00:12 ET, Last post: Jun. 6 2003, 01:58 ET)
any nominations?
colt 1911 Night Commander  (Started: Jun. 3 2003, 07:15 ET, Last post: Jun. 5 2003, 13:57 ET)
Anybody seen one?
HELP MARLIN 22 LR WON'T FEED  (Started: May 21 2003, 22:31 ET, Last post: Jun. 4 2003, 23:41 ET)
grip screw bushing problems  (Started: Jun. 4 2003, 14:10 ET, Last post: Jun. 4 2003, 16:29 ET)
different thread pitches?
Garand Operating  Rod  (Started: Jun. 3 2003, 08:42 ET, Last post: Jun. 3 2003, 10:55 ET)
Replacing gas piston end?
Ruger Mark 1 frame  (Started: May 2 2003, 18:57 ET, Last post: Jun. 2 2003, 02:16 ET)
Magnesium Phosphating PH  (Started: May 30 2003, 17:49 ET, Last post: May 30 2003, 22:52 ET)
Parkerizing PH
bolt steel quality  (Started: May 25 2003, 12:37 ET, Last post: May 27 2003, 20:22 ET)
en14 or en24t
Winchester 1886 Ejector  (Started: May 22 2003, 15:18 ET, Last post: May 22 2003, 17:17 ET)
poorly fitted ejector in 33 WCF
squaring up  (Started: May 21 2003, 04:14 ET, Last post: May 21 2003, 13:15 ET)
quick question
AGH!!!! HELP!  (Started: May 15 2003, 13:35 ET, Last post: May 21 2003, 00:27 ET)
I just broke a gun
.45 super  (Started: Apr. 30 2003, 19:18 ET, Last post: May 20 2003, 19:15 ET)
Grip Safety  (Started: May 18 2003, 21:20 ET, Last post: May 20 2003, 19:14 ET)
Mosin-Nagant 7.62 x 39 conversion?  (Started: May 20 2003, 02:58 ET, Last post: May 20 2003, 10:20 ET)
AR15 Pistol Buffer Assembly  (Started: May 20 2003, 10:07 ET, Last post: May 20 2003, 10:07 ET)
Installation
Has anyone performed a "Trough" sight?  (Started: May 9 2003, 15:12 ET, Last post: May 15 2003, 17:01 ET)
Trough type sight on a 1911
Need cheap material, advice, extend CAR  (Started: May 12 2003, 22:18 ET, Last post: May 14 2003, 10:19 ET)
buttstock about 2", so it fits me.
Restoring Serial Numbers  (Started: Apr. 18 2003, 15:43 ET, Last post: May 12 2003, 23:08 ET)
Hi-lighting worn serial number methods
can anyone explain why  (Started: Feb. 28 2003, 22:02 ET, Last post: May 12 2003, 22:16 ET)
difference in gun designs
Grendel P-10 Pistol  (Started: May 6 2003, 20:57 ET, Last post: May 12 2003, 01:53 ET)
Disassembly of P-10 pistol
anyone have a Numrich's catalog?  (Started: May 11 2003, 20:35 ET, Last post: May 11 2003, 21:56 ET)
looking for a shotgun bead
discription of % on 1911 frame?  (Started: May 10 2003, 16:16 ET, Last post: May 11 2003, 13:51 ET)
S&W Revolver Barrels  (Started: May 2 2003, 17:23 ET, Last post: May 10 2003, 10:05 ET)
FEG PA-63 Help  (Started: Apr. 6 2003, 19:08 ET, Last post: May 8 2003, 15:51 ET)
Beretta 92fs question  (Started: Apr. 27 2003, 17:33 ET, Last post: May 7 2003, 21:51 ET)
I need resources
sling stud blanks  (Started: May 4 2003, 19:58 ET, Last post: May 6 2003, 21:35 ET)
cleaning corrosive ammo  (Started: Apr. 16 2003, 21:47 ET, Last post: May 6 2003, 15:50 ET)
a clean bore is a happy bore
Remington 1100 Operating handle  (Started: Apr. 30 2003, 08:53 ET, Last post: May 6 2003, 07:04 ET)
Variations on the detent plunger ?
Turning a .22 barrel  (Started: Apr. 28 2003, 19:38 ET, Last post: May 5 2003, 02:32 ET)
Question: M-head Collets?  (Started: May 1 2003, 14:05 ET, Last post: May 1 2003, 14:05 ET)
Bridgeport Collets
any other place to get sideplates for a derringer?  (Started: Apr. 22 2003, 13:39 ET, Last post: Apr. 29 2003, 20:50 ET)
besides Lee Tool and Machine?
o/u shotgun barrel "fitting"??  (Started: Apr. 28 2003, 20:51 ET, Last post: Apr. 28 2003, 20:51 ET)
beretta barrel interchangeability
RKI: What thread size?  (Started: Apr. 27 2003, 10:50 ET, Last post: Apr. 27 2003, 16:48 ET)
Redfield #75 Target
Rem mod 6 action attached to a .17 HRM?  (Started: Apr. 27 2003, 11:49 ET, Last post: Apr. 27 2003, 16:13 ET)
Rebarrel question for a old light action
Trigger job  (Started: Apr. 21 2003, 00:26 ET, Last post: Apr. 24 2003, 17:22 ET)
buckmark
Bullet stuck in bore  (Started: Apr. 15 2003, 15:53 ET, Last post: Apr. 22 2003, 18:44 ET)
700 ADL to BDL  (Started: Apr. 14 2003, 11:06 ET, Last post: Apr. 21 2003, 00:00 ET)
M1 Garand  (Started: Apr. 17 2003, 19:49 ET, Last post: Apr. 18 2003, 15:03 ET)
clip ejection issues
Rem 788 Shank Dim.  (Started: Apr. 16 2003, 08:06 ET, Last post: Apr. 16 2003, 08:06 ET)
Question
Polishing SS  (Started: Apr. 14 2003, 12:30 ET, Last post: Apr. 14 2003, 20:31 ET)
SKS stock  (Started: Apr. 7 2003, 21:22 ET, Last post: Apr. 9 2003, 17:47 ET)
questions
Sig hammer and trigger bar  (Started: Apr. 5 2002, 00:12 ET, Last post: Apr. 9 2003, 04:56 ET)
Ok now I have ordered my 80% Sig type P228 casting  (Started: Dec. 28 2002, 03:20 ET, Last post: Apr. 9 2003, 04:44 ET)
Fitting new sear to 1911 frame - too tight...  (Started: Apr. 5 2003, 01:49 ET, Last post: Apr. 7 2003, 23:46 ET)
New C&S tactical sear binds in Colt 1911
Answer from  (Started: Mar. 29 2003, 10:30 ET, Last post: Apr. 3 2003, 01:42 ET)
Mike Bellm
Milling primer...  (Started: Mar. 31 2003, 21:26 ET, Last post: Apr. 1 2003, 20:06 ET)
Help!
WTK: Best Mauser to build on?  (Started: Mar. 18 2003, 01:27 ET, Last post: Apr. 1 2003, 00:54 ET)
Derringer Kits  (Started: Mar. 30 2003, 14:18 ET, Last post: Mar. 31 2003, 18:32 ET)
anyone w/experience?
Coaching a SxS  (Started: Mar. 26 2003, 19:21 ET, Last post: Mar. 31 2003, 16:31 ET)
correct procedure
Pressing in a barrel???  (Started: Mar. 19 2003, 19:19 ET, Last post: Mar. 29 2003, 03:25 ET)
breech bolt  (Started: Mar. 27 2003, 18:27 ET, Last post: Mar. 28 2003, 20:20 ET)
HoW to
Encore Barrels  (Started: Mar. 27 2003, 23:54 ET, Last post: Mar. 28 2003, 18:09 ET)
welding on
Standard grip safety  (Started: Mar. 22 2003, 21:20 ET, Last post: Mar. 24 2003, 15:59 ET)
seamless gapless fit
dovetails  (Started: Jan. 18 2003, 01:32 ET, Last post: Mar. 23 2003, 23:39 ET)
Intratec Tec-9 frame crack  (Started: Jan. 10 2003, 12:27 ET, Last post: Mar. 23 2003, 15:12 ET)
Help to fix it..
Shortening a Chamber...  (Started: Mar. 20 2003, 08:40 ET, Last post: Mar. 21 2003, 21:42 ET)
Mauser .308
beretta 92fs slide rails  (Started: Mar. 18 2003, 11:28 ET, Last post: Mar. 18 2003, 23:46 ET)
looking for informatio on these.
Holmes smg book  (Started: Mar. 15 2003, 03:19 ET, Last post: Mar. 17 2003, 13:01 ET)
Holmes SMG question
Throat extension as described in S&W shop manual  (Started: Mar. 17 2003, 00:35 ET, Last post: Mar. 17 2003, 00:35 ET)
S&W tune up
Basic info for newbie  (Started: Mar. 13 2003, 02:49 ET, Last post: Mar. 16 2003, 13:57 ET)
need info
Shortened barrel, muzzle off-center...  (Started: Mar. 14 2003, 17:09 ET, Last post: Mar. 16 2003, 11:49 ET)
HK91/CETME 16.5" Barrel Conversion  (Started: Mar. 11 2003, 22:51 ET, Last post: Mar. 14 2003, 19:13 ET)
re-chambering 300 rem ultra mag to 300 WSM  (Started: Mar. 9 2003, 18:38 ET, Last post: Mar. 14 2003, 18:50 ET)
PPSH41  (Started: Mar. 14 2003, 10:28 ET, Last post: Mar. 14 2003, 10:28 ET)
semi auto parts
Ar-15 Bolt  (Started: Mar. 8 2003, 15:23 ET, Last post: Mar. 14 2003, 01:17 ET)
Blueprints?
Lightening Trigger Pull  (Started: Mar. 10 2003, 10:05 ET, Last post: Mar. 13 2003, 23:06 ET)
458x2" American in a Remington mod7??  (Started: Mar. 12 2003, 17:07 ET, Last post: Mar. 12 2003, 17:07 ET)
Anyone who have done this?