www.HomeGunsmith.com Archive
Archive Date: Apr. 13 2021, 04:00 ET
This is an archive! Click here to go to the live site.

Home > Building The Perfect Piece at Home > Home Gunsmithing
Calico hardwoods  (Started: Mar. 1 2020, 23:22 ET, Last post: Oct. 20 2020, 10:08 ET)
Parkerizing over existing parkerizing  (Started: Nov. 19 2019, 19:35 ET, Last post: Nov. 19 2019, 21:37 ET)
Parkerizing over existing parkerizing
How to bridge the gap or  (Started: Oct. 14 2019, 21:27 ET, Last post: Oct. 15 2019, 07:29 ET)
A tale of three gauges  (Started: Feb. 4 2018, 19:52 ET, Last post: Oct. 22 2018, 07:52 ET)
Three gauges for a precision rifle
Colt 1902 sporting  (Started: Jun. 20 2017, 15:24 ET, Last post: Jun. 20 2017, 18:06 ET)
Heavy pitting restoration
Alexander arms .50 caliber beowulf barrel removal  (Started: May 12 2017, 01:15 ET, Last post: May 13 2017, 01:24 ET)
Remington 700 fixture  (Started: Mar. 7 2017, 04:38 ET, Last post: Mar. 7 2017, 10:21 ET)
Was wondering..
New extractor for .22  (Started: Nov. 24 2016, 11:43 ET, Last post: Nov. 26 2016, 08:05 ET)
New cylinder stop on a s&w  (Started: Nov. 6 2016, 15:15 ET, Last post: Nov. 8 2016, 17:25 ET)
Penetrating oils  (Started: May 21 2016, 18:51 ET, Last post: May 24 2016, 14:14 ET)
New centerfire rifle accuracy book  (Started: May 7 2016, 09:38 ET, Last post: May 10 2016, 15:58 ET)
Centrfire rifle accuracy
Reserecting a colt  (Started: May 10 2016, 00:18 ET, Last post: May 10 2016, 00:18 ET)
Some useful info here
Revolver plans  (Started: Apr. 3 2008, 22:46 ET, Last post: Feb. 21 2016, 00:50 ET)
Are there any available ?
1863 springfield loaded  (Started: Feb. 2 2016, 19:39 ET, Last post: Feb. 5 2016, 22:55 ET)
Remington cocking piece removal  (Started: Feb. 14 2015, 09:45 ET, Last post: Jan. 20 2016, 18:55 ET)
Inletting bottom metal in rem 700  (Started: Dec. 9 2014, 00:18 ET, Last post: Jan. 3 2016, 14:09 ET)
Anyone have some bp blueprints ?  (Started: Dec. 28 2015, 01:57 ET, Last post: Jan. 2 2016, 13:50 ET)
Homemade stock duplicator  (Started: Jul. 11 2014, 21:03 ET, Last post: Nov. 2 2015, 22:40 ET)
Homemade stock duplicator
Winchester blueprints  (Started: Oct. 12 2015, 10:30 ET, Last post: Oct. 13 2015, 14:19 ET)
Bedding a savage 14  (Started: Oct. 4 2015, 02:26 ET, Last post: Oct. 4 2015, 17:43 ET)
American gun company double barrel 12 gauge  (Started: Sep. 14 2015, 09:21 ET, Last post: Sep. 15 2015, 14:18 ET)
Need a bit of help!
Serialization service?  (Started: Mar. 24 2011, 17:00 ET, Last post: Sep. 14 2015, 17:41 ET)
Poll to go with serialization topic
7.62x54r mauser build  (Started: Jul. 12 2015, 14:33 ET, Last post: Sep. 9 2015, 08:30 ET)
Building a mauser 98 in 7.62x54r
Savage action  (Started: May 15 2015, 23:18 ET, Last post: May 16 2015, 13:51 ET)
Another built from scrap parts,,,  (Started: Nov. 20 2014, 14:34 ET, Last post: Mar. 26 2015, 09:03 ET)
What bullet for this blank barrel  (Started: Feb. 24 2014, 11:07 ET, Last post: Mar. 26 2015, 07:53 ET)
Gun parts cad drawing for sale  (Started: Sep. 12 2014, 14:00 ET, Last post: Mar. 6 2015, 22:40 ET)
Revolver conversion  (Started: May 31 2007, 21:12 ET, Last post: Feb. 20 2015, 03:02 ET)
How easy is it?
Threading a bull barrel  (Started: Feb. 15 2015, 14:05 ET, Last post: Feb. 16 2015, 08:46 ET)
Contour milling, or template milling  (Started: Feb. 6 2015, 03:15 ET, Last post: Feb. 13 2015, 12:32 ET)
Contour milling, or template milling
Cutting tools?  (Started: Feb. 4 2015, 15:29 ET, Last post: Feb. 8 2015, 06:04 ET)
The myth of overlubrication  (Started: Jan. 6 2015, 02:41 ET, Last post: Jan. 7 2015, 21:14 ET)
Dripping wet
How to build a simple single shot bolt action .22  (Started: Jun. 19 2014, 22:11 ET, Last post: Dec. 26 2014, 21:10 ET)
Rifling machine  (Started: Jul. 2 2014, 15:32 ET, Last post: Dec. 16 2014, 22:35 ET)
Khyber pass has a rival  (Started: Nov. 18 2014, 18:43 ET, Last post: Nov. 20 2014, 11:25 ET)
Remington bolt cocking  (Started: Oct. 28 2014, 19:07 ET, Last post: Oct. 30 2014, 02:22 ET)
Remington 700 sa,la mechanical drawings  (Started: Oct. 18 2014, 12:59 ET, Last post: Oct. 23 2014, 14:13 ET)
First try at a "super-simple single"  (Started: Jun. 13 2014, 10:42 ET, Last post: Jun. 19 2014, 00:39 ET)
Building double rifles on shotgun actions  (Started: May 31 2014, 08:15 ET, Last post: Jun. 17 2014, 23:46 ET)
Book
The ultimate in simple barreled actions  (Started: Jun. 16 2007, 10:19 ET, Last post: Jun. 13 2014, 10:39 ET)
Time for a think-tank
My take on inboard/outboard spiders  (Started: May 15 2014, 03:22 ET, Last post: May 27 2014, 16:31 ET)
Making and using spiders
Ideas for a project that i'm interested in  (Started: May 14 2014, 17:08 ET, Last post: May 15 2014, 14:50 ET)
How to offset grin drill bits?  (Started: Apr. 23 2014, 22:46 ET, Last post: May 9 2014, 21:47 ET)
Can anyone expand on metalshapers method
Crosshatching old winchester hammers  (Started: Mar. 11 2014, 20:11 ET, Last post: Mar. 11 2014, 23:39 ET)
How do you guys design your firearms?  (Started: Feb. 10 2014, 19:42 ET, Last post: Mar. 4 2014, 15:13 ET)
My rolling block project  (Started: Feb. 27 2014, 20:02 ET, Last post: Mar. 1 2014, 20:24 ET)
Steven favorite in .32 or .25 rimfire  (Started: Feb. 25 2014, 01:19 ET, Last post: Feb. 25 2014, 22:40 ET)
Conversion
Glass bedding a winchester 70  (Started: Feb. 19 2014, 19:49 ET, Last post: Feb. 20 2014, 23:10 ET)
Browning boss  (Started: Feb. 19 2014, 15:27 ET, Last post: Feb. 19 2014, 21:36 ET)
Sizes for a chicopee rifle  (Started: Feb. 13 2014, 21:04 ET, Last post: Feb. 13 2014, 21:25 ET)
Chicopee rifle build
Winchester sxp problem  (Started: Feb. 8 2014, 22:55 ET, Last post: Feb. 9 2014, 00:24 ET)
Something went wrong - how to fix?
Buttplate screw - hole stripped  (Started: Feb. 5 2014, 12:04 ET, Last post: Feb. 6 2014, 10:01 ET)
Looking for guidance
Plans for the chicopee rifle  (Started: Jan. 30 2014, 00:14 ET, Last post: Jan. 31 2014, 10:09 ET)
Plans needed
Mosin nagant to .45-70 - how to video  (Started: Dec. 10 2013, 20:14 ET, Last post: Jan. 30 2014, 01:21 ET)
Adjustable cheek piece  (Started: Jan. 2 2014, 20:13 ET, Last post: Jan. 3 2014, 19:19 ET)
Should be easy enough
Win model 12 locks up  (Started: Dec. 11 2013, 18:39 ET, Last post: Dec. 25 2013, 15:20 ET)
Winchester model 12 locks up when fired
Master mold considerations  (Started: Dec. 22 2013, 21:21 ET, Last post: Dec. 22 2013, 21:27 ET)
For investment casting
How to: extraction bolt clearance  (Started: Nov. 12 2013, 15:22 ET, Last post: Nov. 14 2013, 14:06 ET)
Homemade sights  (Started: Oct. 30 2013, 19:57 ET, Last post: Nov. 11 2013, 05:14 ET)
More shotgun customizing  (Started: Oct. 19 2013, 16:08 ET, Last post: Nov. 1 2013, 19:14 ET)
Making a $2 peep sight for a mosin-nagant  (Started: Oct. 30 2013, 19:46 ET, Last post: Nov. 1 2013, 09:25 ET)
Homemade tube sight.  (Started: Oct. 30 2013, 19:29 ET, Last post: Oct. 31 2013, 02:21 ET)
The type with no lenses
Homemade .22 speed loaders for tube mags  (Started: Oct. 30 2013, 20:35 ET, Last post: Oct. 30 2013, 20:35 ET)
Working on an old sxs  (Started: Sep. 30 2013, 15:34 ET, Last post: Oct. 2 2013, 08:42 ET)
Metals and uses in guns  (Started: Feb. 27 2013, 21:13 ET, Last post: Sep. 29 2013, 22:58 ET)
What types to use
This is the second boito .410 modified this month  (Started: Sep. 17 2013, 20:34 ET, Last post: Sep. 24 2013, 14:50 ET)
Cutting back a damaged chamber  (Started: Sep. 3 2013, 08:03 ET, Last post: Sep. 20 2013, 13:45 ET)
Did a few mods to my hunting rifle  (Started: Sep. 17 2013, 15:37 ET, Last post: Sep. 17 2013, 20:24 ET)
Stock making  (Started: Aug. 25 2013, 21:33 ET, Last post: Aug. 28 2013, 08:14 ET)
I don't do wood...
Custom choke for a cooey 20g.  (Started: Jun. 20 2013, 16:32 ET, Last post: Aug. 14 2013, 15:43 ET)
Switch barrel mauser  (Started: Jan. 28 2012, 18:43 ET, Last post: Aug. 9 2013, 01:57 ET)
Anyone built one?
Question on in-line muzzleloaders???  (Started: Dec. 19 2012, 22:17 ET, Last post: Dec. 19 2012, 22:48 ET)
Dpm 28 build questions  (Started: Nov. 1 2012, 08:01 ET, Last post: Nov. 2 2012, 01:54 ET)
How to build blueprints??
Damaged screw  (Started: Oct. 26 2012, 09:29 ET, Last post: Oct. 26 2012, 17:47 ET)
Convert full automatic to semi-automatic  (Started: Nov. 2 2011, 19:33 ET, Last post: Oct. 19 2012, 09:43 ET)
Patent
Ammunition chest restoration  (Started: Jun. 25 2012, 04:11 ET, Last post: Sep. 20 2012, 19:57 ET)
Gun box construction plans  (Started: Jun. 30 2012, 02:35 ET, Last post: Sep. 16 2012, 13:36 ET)
For pistol shooting
Any o/u shotgun prints  (Started: Jul. 22 2012, 19:03 ET, Last post: Sep. 16 2012, 12:54 ET)
Hawes .44 cap & ball revolver - got a problem  (Started: Aug. 1 2011, 23:02 ET, Last post: Jun. 20 2012, 05:30 ET)
What do i do now?
A good revolver look  (Started: May 6 2012, 17:18 ET, Last post: Jun. 6 2012, 17:15 ET)
What is a good look for a revolver
Stock making  (Started: Nov. 20 2011, 00:36 ET, Last post: Jun. 1 2012, 01:03 ET)
How it's done
Scratch built carbine (Take 2)  (Started: Oct. 22 2003, 09:06 ET, Last post: Jun. 1 2012, 00:52 ET)
Continuation, as posts aren't showing up
Remove sights  (Started: May 14 2012, 05:57 ET, Last post: May 14 2012, 05:57 ET)
Anyone here enter this gun making contest?  (Started: May 14 2012, 00:05 ET, Last post: May 14 2012, 00:05 ET)
Inspirational
Older remington 870 firing pin  (Started: Apr. 28 2012, 13:29 ET, Last post: May 3 2012, 21:13 ET)
Qb79 stock from scratch to range  (Started: Mar. 25 2012, 04:03 ET, Last post: Mar. 28 2012, 08:16 ET)
Meausering for stock fit  (Started: Jan. 15 2012, 12:03 ET, Last post: Feb. 16 2012, 09:18 ET)
How i do it...
Homemade rifling machine  (Started: Jan. 15 2008, 22:43 ET, Last post: Dec. 9 2011, 18:53 ET)
Armstrong powered rifling machine
The cost of making guns from parts kits  (Started: Dec. 6 2011, 00:09 ET, Last post: Dec. 7 2011, 13:30 ET)
Making wire springs, part iii. torsion springs  (Started: Nov. 22 2011, 21:44 ET, Last post: Nov. 27 2011, 01:23 ET)
Wanna make a ak47 hammer spring?
Lightweight firearm and method of manufacturing  (Started: Nov. 8 2011, 00:03 ET, Last post: Nov. 8 2011, 16:28 ET)
Patent
Make your own custom grips  (Started: Sep. 30 2011, 23:09 ET, Last post: Oct. 7 2011, 07:11 ET)
How to do it
Hanover arms co double shotgun parts  (Started: Sep. 22 2011, 22:58 ET, Last post: Sep. 22 2011, 22:58 ET)
Looks like almost all you would need
Can someone make a ruger 22/45 grip frame  (Started: Aug. 31 2011, 00:23 ET, Last post: Sep. 4 2011, 23:08 ET)
M70 extractor cut holding device  (Started: Mar. 22 2009, 22:51 ET, Last post: Aug. 30 2011, 07:41 ET)
Double .22 hornet rifle  (Started: May 26 2011, 04:11 ET, Last post: Aug. 22 2011, 19:07 ET)
Nice inspiration at least.
Portable rifle racks  (Started: Aug. 12 2011, 02:17 ET, Last post: Aug. 16 2011, 21:19 ET)
Not meant as plans, but close enough
My friend ruined his m1a.  (Started: Jul. 6 2011, 18:42 ET, Last post: Aug. 16 2011, 16:34 ET)
Is there hope?
High standard sentinal 'kit'  (Started: Jul. 21 2011, 15:27 ET, Last post: Jul. 24 2011, 03:29 ET)
How hard?
Spring repair (how to)  (Started: Jul. 14 2011, 09:14 ET, Last post: Jul. 16 2011, 16:48 ET)
Retensioning a hammer spring
Machining of semi-auto pistols  (Started: Jul. 1 2011, 13:29 ET, Last post: Jul. 1 2011, 19:05 ET)
Ptr91 chamber rifling tool  (Started: May 25 2011, 13:19 ET, Last post: May 26 2011, 19:01 ET)
Keltec pf9 remove pretravel and diy holster  (Started: May 16 2011, 10:39 ET, Last post: May 16 2011, 17:40 ET)
Steel beretta 92fs frames  (Started: Apr. 27 2011, 09:27 ET, Last post: Apr. 30 2011, 19:27 ET)
Muzzle breaks  (Started: Apr. 14 2011, 23:46 ET, Last post: Apr. 29 2011, 01:12 ET)
Material  1045?
Salvaging an otherwise worthless handgun  (Started: Apr. 24 2011, 20:58 ET, Last post: Apr. 24 2011, 21:00 ET)
Gives me ideas
Semi auto mac-10 plans  (Started: Mar. 29 2011, 14:14 ET, Last post: Apr. 23 2011, 13:55 ET)
Electro chemical etching of rifling?  (Started: Mar. 6 2011, 20:24 ET, Last post: Apr. 17 2011, 10:18 ET)
Will it work?
Short caliber in long action?  (Started: Mar. 30 2011, 21:21 ET, Last post: Mar. 31 2011, 11:32 ET)
Remington 700
Serialization service?  (Started: Mar. 24 2011, 16:55 ET, Last post: Mar. 26 2011, 15:06 ET)
Trying to gauge interest
Can this be repaired?  (Started: Oct. 28 2010, 10:29 ET, Last post: Mar. 17 2011, 21:40 ET)
Crack in pistol frame
Put laser to work  (Started: Mar. 6 2011, 02:19 ET, Last post: Mar. 7 2011, 08:30 ET)
Ar15 engraving
Structural steel a572  (Started: Mar. 1 2011, 12:22 ET, Last post: Mar. 2 2011, 23:11 ET)
Wtk: books out there on revolver building / design  (Started: Jan. 24 2011, 22:45 ET, Last post: Feb. 17 2011, 13:35 ET)
Seeking books about building a revolver
10/22 magnum receiver from scratch  (Started: Feb. 13 2011, 11:46 ET, Last post: Feb. 16 2011, 00:58 ET)
Help on milling a steel 10/22 mag
Ak in 9mm  (Started: Jan. 11 2011, 20:43 ET, Last post: Jan. 13 2011, 09:55 ET)
Mosin negant safety???  (Started: Dec. 25 2010, 00:03 ET, Last post: Jan. 10 2011, 23:53 ET)
Epoxy resin + balsa wood for stock?  (Started: Jul. 5 2009, 23:06 ET, Last post: Jan. 10 2011, 20:20 ET)
Hobbiest 'polymer'?
Rem 700 bolt lug(sides) and action clearance  (Started: Jan. 2 2011, 19:37 ET, Last post: Jan. 2 2011, 19:37 ET)
Building palma rifle  (Started: Dec. 27 2010, 22:48 ET, Last post: Dec. 28 2010, 17:44 ET)
Lots of interesting info
Anyone make a roller locking pistol or rifle?  (Started: Jun. 2 2008, 12:00 ET, Last post: Dec. 27 2010, 20:55 ET)
Double rifle sight/barrel regulation option  (Started: Aug. 7 2010, 15:28 ET, Last post: Dec. 24 2010, 23:39 ET)
Easy way of doing it.
Self-alternating rear sights for double-barrel fir  (Started: Sep. 25 2010, 05:20 ET, Last post: Dec. 24 2010, 23:33 ET)
An interesting patent
Too much choke  (Started: Dec. 1 2006, 21:02 ET, Last post: Dec. 5 2010, 18:08 ET)
Air rifle barrel has too much choke
Amd65 barrel dimensions  (Started: May 10 2008, 06:51 ET, Last post: Nov. 14 2010, 20:47 ET)
Interesting gun mechanism pictures and diagrams  (Started: Nov. 14 2010, 11:22 ET, Last post: Nov. 14 2010, 17:54 ET)
Nice previews
Semi auto bren tutorial  (Started: Sep. 8 2010, 21:28 ET, Last post: Oct. 16 2010, 10:43 ET)
Steampunk-esque .50 bmg rifle.  (Started: Sep. 26 2010, 21:03 ET, Last post: Sep. 28 2010, 14:23 ET)
What a beauty.
Ithaca 37 deer gun overhaul  (Started: Jul. 30 2010, 15:59 ET, Last post: Jul. 30 2010, 17:39 ET)
Introducing the browning bpsmb  (Started: Jul. 30 2010, 16:54 ET, Last post: Jul. 30 2010, 17:37 ET)
10ga master blaster
Browning bar zenith drives me crazy !!!  (Started: Jun. 18 2010, 14:23 ET, Last post: Jul. 18 2010, 12:28 ET)
Rem 700 bolt timing  (Started: Jun. 11 2010, 23:09 ET, Last post: Jun. 27 2010, 04:51 ET)
Small falling block action  (Started: Apr. 30 2010, 16:21 ET, Last post: May 14 2010, 15:48 ET)
Chambering for belted cartridge  (Started: May 8 2010, 13:53 ET, Last post: May 11 2010, 21:27 ET)
One more question - 1st full chamber attemp  (Started: Dec. 7 2009, 22:04 ET, Last post: May 11 2010, 21:23 ET)
Morris tube.  (Started: Apr. 28 2010, 01:18 ET, Last post: Apr. 29 2010, 08:53 ET)
Neat conversion idea.
Slide lockback  (Started: Apr. 27 2010, 01:35 ET, Last post: Apr. 27 2010, 01:35 ET)
After last round
Rossi 92 action / feed problems  (Started: Apr. 14 2010, 23:05 ET, Last post: Apr. 15 2010, 16:30 ET)
Modified sten mag for a mac-11/9 magwell  (Started: Apr. 13 2010, 13:01 ET, Last post: Apr. 14 2010, 17:41 ET)
M1a/m14 gas plug  (Started: Mar. 30 2010, 18:34 ET, Last post: Mar. 30 2010, 18:34 ET)
Advice/help in nor-cal  (Started: Mar. 15 2010, 22:09 ET, Last post: Mar. 22 2010, 01:59 ET)
80% ar  ...
I would like to build one of these.  (Started: May 6 2008, 14:15 ET, Last post: Mar. 17 2010, 00:04 ET)
Ar-15 lower with mac upper adapter
300m var round  (Started: Feb. 15 2010, 23:55 ET, Last post: Feb. 16 2010, 09:09 ET)
Need help!!  (Started: Feb. 14 2010, 23:23 ET, Last post: Feb. 15 2010, 18:44 ET)
Gas systems?  (Started: Mar. 23 2008, 17:24 ET, Last post: Jan. 18 2010, 14:03 ET)
Which one?
Bolt face rebush??  (Started: Dec. 26 2009, 00:40 ET, Last post: Dec. 26 2009, 18:32 ET)
Inquiry
Caked in grease  (Started: Dec. 19 2009, 16:37 ET, Last post: Dec. 21 2009, 15:03 ET)
Amazingly simple safety  (Started: Dec. 6 2009, 23:06 ET, Last post: Dec. 8 2009, 19:53 ET)
Old idea
1st full chamber attemp  (Started: Nov. 30 2009, 21:33 ET, Last post: Dec. 3 2009, 21:32 ET)
Mounting a tasco accudot  (Started: Nov. 24 2009, 22:42 ET, Last post: Nov. 26 2009, 16:09 ET)
First build planning; .22 hornet  (Started: Sep. 7 2009, 02:50 ET, Last post: Nov. 3 2009, 18:47 ET)
Good with metal, ugly with wood
Mauser or 1903 receiver and high pressure  (Started: Mar. 21 2009, 22:43 ET, Last post: Nov. 3 2009, 18:44 ET)
Engraving woes ;-(  (Started: Oct. 4 2009, 22:50 ET, Last post: Oct. 31 2009, 17:08 ET)
Adjustable buttpads  (Started: Aug. 6 2009, 17:30 ET, Last post: Oct. 26 2009, 20:23 ET)
Revolver barrel removal  (Started: Oct. 14 2009, 23:52 ET, Last post: Oct. 15 2009, 14:19 ET)
How do you do it
Diy rivet making.  (Started: Oct. 14 2009, 10:05 ET, Last post: Oct. 14 2009, 10:05 ET)
If you need a custom rivet.
.30 carbine blowback feasability  (Started: Jun. 3 2009, 06:58 ET, Last post: Oct. 8 2009, 22:51 ET)
Extraction problem - 1909 argentine mauser  (Started: Sep. 30 2009, 17:08 ET, Last post: Sep. 30 2009, 19:47 ET)
Ar bolt & extension for bolt gun?  (Started: Sep. 21 2009, 00:21 ET, Last post: Sep. 21 2009, 23:31 ET)
Education choices  (Started: Aug. 4 2009, 22:24 ET, Last post: Aug. 10 2009, 00:54 ET)
Before i start buggin you, i'll bug them
Tempering/hardening  (Started: Jul. 17 2009, 16:13 ET, Last post: Jul. 19 2009, 18:08 ET)
Question that has been bothering me for a while  (Started: Feb. 5 2009, 09:15 ET, Last post: Jul. 15 2009, 15:21 ET)
Large  ring mauser with small rg barrel
Need some help  (Started: May 21 2009, 10:24 ET, Last post: Jul. 15 2009, 13:14 ET)
Receiver - is it safe to use?
Scratch built semi-auto pistol concept  (Started: Jul. 1 2009, 13:58 ET, Last post: Jul. 12 2009, 23:55 ET)
Can we come up with a design
Ou survival style  (Started: Jun. 10 2009, 21:41 ET, Last post: Jun. 10 2009, 22:50 ET)
Revolver - good drawings for cylinder timing  (Started: May 24 2009, 12:32 ET, Last post: May 24 2009, 12:34 ET)
Removing s&w m&p front sight  (Started: May 21 2009, 18:45 ET, Last post: May 23 2009, 00:08 ET)
How do i do it without damage
? on cutting win chokes  (Started: May 11 2009, 08:17 ET, Last post: May 13 2009, 07:49 ET)
How to use these tools?
Mauser parts needed.  (Started: May 4 2009, 21:48 ET, Last post: May 4 2009, 21:48 ET)
Well parts needed.
Crt sss  (Started: Jun. 28 2008, 14:22 ET, Last post: Apr. 12 2009, 15:08 ET)
Rem 700 detachable mag conversion
Help!!!  (Started: Mar. 18 2009, 13:21 ET, Last post: Mar. 23 2009, 18:12 ET)
Need help reassembling a 5906!!!
Semi-auto blowback pistol scetch  (Started: Mar. 13 2009, 11:50 ET, Last post: Mar. 14 2009, 16:23 ET)
Having fun with a paper and pencil
Shotgun derringer  (Started: Mar. 9 2009, 17:51 ET, Last post: Mar. 11 2009, 01:12 ET)
.12 guage
.22 pressure question  (Started: Feb. 5 2009, 18:15 ET, Last post: Mar. 5 2009, 00:55 ET)
Breach block?
How to fit and chamber a barrel  (Started: Feb. 14 2007, 00:33 ET, Last post: Feb. 25 2009, 14:36 ET)
Lots of pictures!
Pictures of volkssturm gewehr 1  (Started: Sep. 5 2008, 15:27 ET, Last post: Feb. 17 2009, 20:23 ET)
Sleeve and thread barrel  (Started: Feb. 11 2009, 14:31 ET, Last post: Feb. 15 2009, 08:59 ET)
To convert ak barrel to fit savage
Glock blueprints  (Started: Mar. 23 2008, 20:48 ET, Last post: Feb. 13 2009, 23:24 ET)
S&w magazine safety  (Started: Feb. 4 2009, 09:50 ET, Last post: Feb. 7 2009, 19:32 ET)
Disconnecting the bastard
Talented young english builder  (Started: Nov. 12 2008, 01:09 ET, Last post: Jan. 26 2009, 13:27 ET)
Builds amazing airsoft firearm copies
How do you headspace a rimfire?  (Started: Jan. 24 2009, 14:55 ET, Last post: Jan. 25 2009, 21:10 ET)
Is everyone backordered?????  (Started: Jan. 16 2009, 13:42 ET, Last post: Jan. 21 2009, 22:11 ET)
Ar-15 part sourcing
.223 barrel blank source??????  (Started: Jan. 8 2009, 08:48 ET, Last post: Jan. 16 2009, 16:45 ET)
M82a1 bolt/carrier detail pics.  (Started: Jan. 4 2009, 10:22 ET, Last post: Jan. 5 2009, 17:51 ET)
From video of said rifle.
Hk reciever flats  (Started: Oct. 18 2008, 12:28 ET, Last post: Jan. 4 2009, 11:24 ET)
Scope mount holes  (Started: Dec. 17 2008, 07:15 ET, Last post: Dec. 29 2008, 16:23 ET)
Crf conversion  (Started: Dec. 26 2008, 10:14 ET, Last post: Dec. 26 2008, 10:14 ET)
Stock making with laser engraver?  (Started: Oct. 29 2008, 12:00 ET, Last post: Dec. 17 2008, 19:12 ET)
Here is my big idea.
Need an ak barrel machined  (Started: Nov. 29 2008, 02:42 ET, Last post: Dec. 16 2008, 15:49 ET)
Good supplier of springs  (Started: Dec. 12 2008, 23:05 ET, Last post: Dec. 15 2008, 20:54 ET)
Who do you use?
Text color  (Started: Nov. 24 2008, 20:19 ET, Last post: Nov. 24 2008, 21:27 ET)
Mannlicher stock nose cap  (Started: Nov. 14 2008, 07:04 ET, Last post: Nov. 17 2008, 05:46 ET)
Barrel roll down  (Started: Nov. 12 2008, 21:30 ET, Last post: Nov. 13 2008, 23:57 ET)
Opinins on practicality of side loading mags.  (Started: Nov. 1 2008, 19:43 ET, Last post: Nov. 7 2008, 13:53 ET)
Worth looking into?
Feed problems  (Started: Oct. 12 2008, 15:03 ET, Last post: Nov. 5 2008, 13:45 ET)
!888 gew rebarreled with turk 38 barrel  (Started: Oct. 1 2008, 16:16 ET, Last post: Oct. 5 2008, 21:58 ET)
Various questions
Parking flats  (Started: Sep. 29 2008, 20:17 ET, Last post: Sep. 29 2008, 23:43 ET)
Before rolling
Scratch built mac11 upper and bolt?  (Started: Sep. 20 2008, 00:00 ET, Last post: Sep. 28 2008, 22:09 ET)
Anyone done it yet?
Tapco sale  (Started: Sep. 25 2008, 13:06 ET, Last post: Sep. 25 2008, 13:06 ET)
Close out
Drum magazines  (Started: Dec. 12 2006, 00:28 ET, Last post: Sep. 19 2008, 14:07 ET)
How do they work
Another interesting web site  (Started: Sep. 8 2008, 00:03 ET, Last post: Sep. 8 2008, 00:03 ET)
Neat website, some neat ideas.  (Started: Sep. 7 2008, 15:44 ET, Last post: Sep. 7 2008, 17:15 ET)
Cnccookbook.
Browning blr 308  (Started: Aug. 28 2008, 11:41 ET, Last post: Aug. 30 2008, 01:29 ET)
Assembly
Rail gun base  (Started: Jul. 8 2008, 17:42 ET, Last post: Aug. 28 2008, 16:35 ET)
Print or drawing
Browning challenger frt sight blade  (Started: Aug. 26 2008, 16:56 ET, Last post: Aug. 27 2008, 19:58 ET)
Helping  a friend
Crossman parts  (Started: Aug. 26 2008, 14:19 ET, Last post: Aug. 26 2008, 20:33 ET)
Rifle barrel making  (Started: Aug. 15 2008, 20:01 ET, Last post: Aug. 17 2008, 21:12 ET)
Rem 700 m1a mag conversion  (Started: Mar. 30 2008, 15:07 ET, Last post: Aug. 11 2008, 13:27 ET)
Discussion thread
Caselman cad model  (Started: Aug. 3 2008, 22:19 ET, Last post: Aug. 8 2008, 00:54 ET)
Caselman in pro/e
How can you bore and rifle a crooked barrel?  (Started: Jul. 31 2008, 12:48 ET, Last post: Aug. 2 2008, 10:16 ET)
Unusual machining problem
Remington 700 trigger  (Started: May 25 2008, 18:31 ET, Last post: Jun. 23 2008, 19:01 ET)
Adjustment and construction
7.62x25 home built bullpup video.  (Started: Jun. 6 2008, 23:39 ET, Last post: Jun. 23 2008, 01:38 ET)
Who made this? what is it?
Armen  (Started: Jun. 20 2008, 16:46 ET, Last post: Jun. 20 2008, 16:46 ET)
Taurus barrel thread pitch?
8mm turkish mauser  (Started: Jun. 15 2008, 19:46 ET, Last post: Jun. 16 2008, 15:58 ET)
What do i do with it?
Fs:  .223 remington 700 barrel, and other items  (Started: May 21 2008, 08:05 ET, Last post: Jun. 9 2008, 19:58 ET)
Cetme bolt carrier  (Started: Jun. 3 2008, 13:27 ET, Last post: Jun. 6 2008, 10:38 ET)
Questions
"creedmoor" fold down rear tang sight  (Started: May 27 2008, 21:42 ET, Last post: May 28 2008, 22:50 ET)
Silicon resin  (Started: May 22 2008, 14:00 ET, Last post: May 23 2008, 14:26 ET)
How to use
Skeletal steel and alloy construction?  (Started: May 19 2008, 00:27 ET, Last post: May 20 2008, 16:51 ET)
Reinforcing aluminum with steel skeleton
Antique rifling machine  (Started: May 1 2008, 03:39 ET, Last post: May 14 2008, 22:24 ET)
Inexpensive "oil dunk" mix?  (Started: May 2 2008, 13:15 ET, Last post: May 10 2008, 16:41 ET)
Barrel threading  (Started: Nov. 21 2006, 18:49 ET, Last post: May 9 2008, 11:56 ET)
How do you center it?
Ar-15/mac build  (Started: Apr. 23 2006, 22:38 ET, Last post: May 8 2008, 14:58 ET)
H&r 348 12 ga schematics  (Started: Apr. 23 2008, 14:44 ET, Last post: Apr. 23 2008, 14:44 ET)
I need a copy
Liberator pistol - diy  (Started: Apr. 8 2008, 10:27 ET, Last post: Apr. 22 2008, 23:14 ET)
Kriss submachine gun patent  (Started: Apr. 20 2008, 20:27 ET, Last post: Apr. 20 2008, 21:01 ET)
Anyone got a number?
Bullpup trigger options.. hammer linkage?  (Started: Apr. 20 2008, 10:42 ET, Last post: Apr. 20 2008, 11:59 ET)
The solution?
M14 blueprints???  (Started: Apr. 15 2008, 20:18 ET, Last post: Apr. 16 2008, 20:36 ET)
Where can i get them???
Plans & specifications of the l.c. smith  (Started: Apr. 6 2008, 18:05 ET, Last post: Apr. 6 2008, 18:05 ET)
Looking for a copy of the book
Turning large barrel help needed  (Started: Apr. 2 2008, 21:06 ET, Last post: Apr. 5 2008, 18:22 ET)
Source for decent generic barrel blanks?  (Started: Apr. 5 2008, 11:32 ET, Last post: Apr. 5 2008, 13:43 ET)
Anything available
Winchester 1200/1300 question.  (Started: Mar. 31 2008, 02:14 ET, Last post: Apr. 1 2008, 06:11 ET)
Non-blowback pistol caliber carbine?  (Started: Mar. 28 2008, 23:30 ET, Last post: Mar. 30 2008, 00:17 ET)
Uzi bolt weight/mass for .45 acp  (Started: Feb. 15 2008, 23:28 ET, Last post: Mar. 27 2008, 04:42 ET)
What's the formula for cyclic rate?
Welding advise needed spot welding experts welcome  (Started: Feb. 26 2008, 08:57 ET, Last post: Mar. 19 2008, 05:44 ET)
Welding questions and hopefully answers
Barrel clamp  (Started: Jul. 23 2007, 07:50 ET, Last post: Mar. 19 2008, 05:30 ET)
Possible barrel vice
**expedient homemade firearms**  (Started: Jan. 13 2005, 20:59 ET, Last post: Mar. 19 2008, 04:59 ET)
The book by phillip luty
Interested in a challenging project?  (Started: Jan. 22 2008, 02:10 ET, Last post: Mar. 19 2008, 04:48 ET)
Tempering oven  (Started: Mar. 19 2008, 03:13 ET, Last post: Mar. 19 2008, 03:34 ET)
Even heat from oz
A jet funnel costs what!?!  (Started: Jan. 26 2008, 15:37 ET, Last post: Mar. 2 2008, 16:45 ET)
$90 for a hunk of steel?i don't think so
M53/mg-42 kits  (Started: Feb. 24 2008, 00:54 ET, Last post: Feb. 29 2008, 12:14 ET)
Making a trigger guard.  (Started: Feb. 24 2008, 23:54 ET, Last post: Feb. 28 2008, 20:30 ET)
Cad models  (Started: Feb. 19 2008, 14:04 ET, Last post: Feb. 20 2008, 15:00 ET)
Building a 6-gauge muzzleloader  (Started: Feb. 9 2008, 15:48 ET, Last post: Feb. 11 2008, 23:37 ET)
An article in the backwoodsman
Rechambering a 50 bmg  (Started: Jan. 13 2008, 22:50 ET, Last post: Jan. 15 2008, 10:43 ET)
Mki ruger .22 pistol conversion  (Started: Jan. 5 2008, 14:58 ET, Last post: Jan. 11 2008, 03:49 ET)
Converting to mkii bolt hold open style
Were to find cheap brls  (Started: Dec. 30 2007, 19:00 ET, Last post: Dec. 31 2007, 14:41 ET)
Need somthing to learn on
Chambering without a reamer?  (Started: Oct. 31 2007, 21:47 ET, Last post: Dec. 30 2007, 15:26 ET)
Chambering without a reamer?
Considering an atlas 6" mk1 opinions  (Started: Dec. 24 2007, 00:44 ET, Last post: Dec. 29 2007, 01:06 ET)
Zamak parts durable enough?
Clausing 4912 lathe  (Started: Dec. 16 2007, 18:42 ET, Last post: Dec. 23 2007, 20:31 ET)
Ar15 brl  (Started: Dec. 7 2007, 21:05 ET, Last post: Dec. 8 2007, 08:31 ET)
Beginer building tips
Cetme or g3 build question  (Started: Dec. 6 2007, 12:51 ET, Last post: Dec. 7 2007, 08:19 ET)
About the orf 80% flats
Ruger #1  (Started: Dec. 2 2007, 14:26 ET, Last post: Dec. 3 2007, 11:54 ET)
Removing a barrel of a winchester 1886  (Started: Nov. 15 2007, 01:47 ET, Last post: Nov. 16 2007, 22:58 ET)
Sucker rod  (Started: Oct. 11 2007, 20:51 ET, Last post: Nov. 1 2007, 18:28 ET)
How hard
Cooye model 75  (Started: Sep. 27 2007, 10:52 ET, Last post: Oct. 29 2007, 20:43 ET)
Simplest single shot action
Dlask dac394 kit  (Started: Oct. 22 2007, 21:16 ET, Last post: Oct. 28 2007, 13:04 ET)
Barrel rifling - polish partisans way - part 1  (Started: Sep. 24 2007, 21:27 ET, Last post: Oct. 25 2007, 19:39 ET)
Or how to cut grooves with a reamer...
37mm launcher  (Started: Oct. 7 2007, 12:42 ET, Last post: Oct. 24 2007, 13:43 ET)
Adjustable stock  (Started: Oct. 23 2007, 20:06 ET, Last post: Oct. 23 2007, 20:06 ET)
Voice your opinions
.50 bmg project question  (Started: Sep. 24 2007, 10:43 ET, Last post: Oct. 21 2007, 12:46 ET)
Barrel rifling - polish partisans way - part 2  (Started: Sep. 25 2007, 21:43 ET, Last post: Oct. 16 2007, 13:04 ET)
There is always other way...
Gun laws in spain  (Started: May 21 2007, 11:35 ET, Last post: Oct. 13 2007, 19:07 ET)
Mossberg 500 firing problem  (Started: Oct. 12 2007, 13:39 ET, Last post: Oct. 13 2007, 02:02 ET)
Firing with pulling trigger
Making hk style flash hider  (Started: Oct. 4 2007, 10:07 ET, Last post: Oct. 5 2007, 00:01 ET)
M1a accurizing system  (Started: Sep. 24 2007, 22:52 ET, Last post: Sep. 24 2007, 22:55 ET)
Preliminary concept
Turning down a bolt handle...  (Started: Sep. 19 2007, 12:40 ET, Last post: Sep. 24 2007, 19:05 ET)
...and fitting a new bolt knob
9 mm barrel strength  (Started: Sep. 20 2007, 02:32 ET, Last post: Sep. 22 2007, 10:24 ET)
A.r.m.s scope mount on the m1a  (Started: Sep. 15 2007, 01:11 ET, Last post: Sep. 15 2007, 01:11 ET)
Barrel rifling  (Started: Oct. 26 2006, 14:31 ET, Last post: Sep. 12 2007, 05:54 ET)
An interesting read
Freebie levergun  (Started: May 16 2007, 02:03 ET, Last post: Sep. 12 2007, 05:40 ET)
Prime candidate for takedown mod
Help on a folding trigger  (Started: Jul. 6 2006, 16:45 ET, Last post: Sep. 6 2007, 16:45 ET)
Remington 700 builders?  (Started: Aug. 14 2007, 05:00 ET, Last post: Sep. 5 2007, 14:15 ET)
Need some help
Replacing front site on beretta 96  (Started: Aug. 31 2007, 23:00 ET, Last post: Sep. 3 2007, 17:15 ET)
Heat treating oven  (Started: Apr. 21 2007, 16:18 ET, Last post: Aug. 20 2007, 11:00 ET)
Takedown design  (Started: Jan. 24 2005, 23:40 ET, Last post: Aug. 19 2007, 08:36 ET)
Mauser project
Sw model 48  (Started: Jul. 29 2007, 13:20 ET, Last post: Aug. 18 2007, 18:15 ET)
New cylinder
Mounting a recoil pad to a synthetic stock-  (Started: Jun. 26 2007, 01:43 ET, Last post: Aug. 14 2007, 21:27 ET)
No place for screws? no problem!
Steels for firearms  (Started: Jul. 30 2007, 13:16 ET, Last post: Aug. 12 2007, 21:24 ET)
What is good and what is not?
Taurus .25acp 'beretta'?  (Started: Aug. 1 2007, 12:24 ET, Last post: Aug. 2 2007, 02:03 ET)
Alum-framed cmdr - unusual grip saftey  (Started: Jul. 11 2007, 12:30 ET, Last post: Jul. 11 2007, 16:04 ET)
Google books - gunsmithing by roy f. dunlap  (Started: Jun. 27 2007, 10:58 ET, Last post: Jun. 27 2007, 12:22 ET)
Brownell's hand crowner ?  (Started: Jan. 10 2007, 13:46 ET, Last post: Jun. 20 2007, 22:19 ET)
Artistry in firearm design  (Started: Jun. 3 2007, 18:14 ET, Last post: Jun. 15 2007, 10:22 ET)
P.a. luty .22 pistol  (Started: Jun. 3 2007, 15:39 ET, Last post: Jun. 11 2007, 18:25 ET)
Marlin mod 30 as safety  (Started: May 27 2007, 14:04 ET, Last post: May 29 2007, 00:21 ET)
Pen gun  (Started: Dec. 26 2006, 17:00 ET, Last post: May 20 2007, 11:39 ET)
40mm repair  (Started: Apr. 30 2007, 00:45 ET, Last post: May 12 2007, 15:57 ET)
Well used & abused, new lease on life!
Ar15 80% buffer tube hole done the easy way  (Started: May 11 2007, 13:26 ET, Last post: May 11 2007, 13:26 ET)
Easy as pie 1-2-3
Ar lower buffer reamer  (Started: May 9 2007, 21:12 ET, Last post: May 11 2007, 10:53 ET)
One reamer for 9x19, 9x21, 9x23, etc...  (Started: Apr. 5 2007, 14:50 ET, Last post: May 6 2007, 14:58 ET)
Shortening the barrel on s&w.  (Started: May 4 2007, 17:28 ET, Last post: May 4 2007, 17:28 ET)
Making a Ruger MK I Receiver Clone  (Started: Nov. 13 2002, 21:20 ET, Last post: Apr. 28 2007, 18:58 ET)
materials, bbl timing, and helpful hints
Investment casting???  (Started: Apr. 15 2007, 01:42 ET, Last post: Apr. 27 2007, 14:44 ET)
Revolver timing  (Started: Apr. 23 2007, 18:41 ET, Last post: Apr. 23 2007, 20:43 ET)
Case hardening  (Started: Apr. 9 2007, 17:59 ET, Last post: Apr. 10 2007, 17:28 ET)
Colt cobra with issues  (Started: Mar. 11 2007, 22:51 ET, Last post: Apr. 4 2007, 01:07 ET)
Binds up
4 hour rust bluing  (Started: Mar. 15 2007, 20:19 ET, Last post: Apr. 2 2007, 07:52 ET)
Flaregun conversion  (Started: Dec. 21 2006, 10:34 ET, Last post: Mar. 24 2007, 12:58 ET)
How kan i make my magazines myself?  (Started: Mar. 4 2007, 07:31 ET, Last post: Mar. 22 2007, 12:52 ET)
What are good pipe & tube sources?  (Started: Mar. 21 2007, 12:42 ET, Last post: Mar. 21 2007, 22:40 ET)
What materials suppliers do you use?
New project  (Started: Mar. 17 2007, 23:25 ET, Last post: Mar. 20 2007, 06:31 ET)
80 % frames
Ruger blackhawk barrel replacement  (Started: Mar. 8 2007, 21:25 ET, Last post: Mar. 9 2007, 04:32 ET)
How to pillar and glass bed a rifle  (Started: Feb. 24 2007, 17:24 ET, Last post: Feb. 27 2007, 00:25 ET)
Lots of pictures!
03 springfield in cal 22  (Started: Jan. 18 2007, 17:26 ET, Last post: Feb. 26 2007, 17:57 ET)
Barrel reduction  (Started: Feb. 14 2007, 16:56 ET, Last post: Feb. 24 2007, 00:15 ET)
Skinny up the muzzle
Pillar bedding  (Started: Feb. 17 2007, 01:20 ET, Last post: Feb. 20 2007, 11:20 ET)
Aluminum or statinless steel pillars
Black powder conversion  (Started: Dec. 24 2006, 10:41 ET, Last post: Feb. 19 2007, 01:40 ET)
Hk91/g3 chamber specs  (Started: Feb. 13 2007, 10:51 ET, Last post: Feb. 13 2007, 11:33 ET)
Target trigger kit from midway?  (Started: Feb. 12 2007, 09:56 ET, Last post: Feb. 12 2007, 09:56 ET)
Gunsmithing
Scope  (Started: Jan. 7 2007, 22:41 ET, Last post: Jan. 31 2007, 11:24 ET)
Remington 700 project  (Started: Jan. 21 2007, 21:30 ET, Last post: Jan. 22 2007, 12:20 ET)
M40 clone
Protective barrel 'netting'  (Started: Jul. 2 2006, 22:55 ET, Last post: Jan. 21 2007, 17:48 ET)
Where to find?
Thoughts on an 1885 highwall  (Started: Mar. 26 2006, 14:50 ET, Last post: Jan. 21 2007, 16:54 ET)
The first sxmall steps
Anodize lowers or not?  (Started: Jan. 19 2007, 15:36 ET, Last post: Jan. 21 2007, 11:44 ET)
Romanian 22 rifle projects  (Started: Dec. 13 2006, 23:26 ET, Last post: Jan. 19 2007, 17:49 ET)
Projects for a cheep pickup
Want to start a project need help  (Started: Jan. 19 2007, 02:22 ET, Last post: Jan. 19 2007, 14:46 ET)
What's the best/easiest finish to use?  (Started: Jan. 11 2007, 22:52 ET, Last post: Jan. 12 2007, 01:32 ET)
How to downsize cal50. to 308, and 22.?  (Started: Oct. 22 2006, 13:44 ET, Last post: Jan. 10 2007, 18:53 ET)
Ruger single six .22 barrel  (Started: Dec. 30 2006, 22:44 ET, Last post: Dec. 30 2006, 22:44 ET)
How to remove?
Stock spacer pads  (Started: Dec. 17 2006, 12:04 ET, Last post: Dec. 17 2006, 22:33 ET)
Polishing them up after grinding
Barrel lapping came out very well  (Started: Dec. 9 2006, 21:37 ET, Last post: Dec. 13 2006, 02:32 ET)
Barrel lapping project
Plaster-of-paris?  (Started: Nov. 16 2006, 16:40 ET, Last post: Dec. 8 2006, 07:46 ET)
Stock cutting jigs
First post questions on a mauser sporter project?  (Started: Nov. 14 2006, 11:34 ET, Last post: Nov. 27 2006, 11:43 ET)
Time to give it a try, but where to start?  (Started: Jan. 9 2006, 03:53 ET, Last post: Nov. 8 2006, 17:08 ET)
Where to start for a building beginner
Unsafe rem 700 action ???  (Started: Nov. 2 2006, 18:56 ET, Last post: Nov. 6 2006, 00:39 ET)
Cheap barrels  (Started: Sep. 16 2006, 03:05 ET, Last post: Nov. 1 2006, 16:15 ET)
91/30s
Grizzly g9972z lathe?  (Started: Oct. 30 2006, 13:03 ET, Last post: Oct. 30 2006, 19:27 ET)
Buis plans?  (Started: Oct. 25 2006, 12:59 ET, Last post: Oct. 27 2006, 19:16 ET)
Set trigger  (Started: Oct. 10 2006, 19:53 ET, Last post: Oct. 19 2006, 15:20 ET)
Plans?
Rechamber marlin336 to something smaller....  (Started: Sep. 29 2006, 13:19 ET, Last post: Sep. 29 2006, 16:33 ET)
Please help with bgarrel sleeving etc.
S&w nickel parts  (Started: Sep. 25 2006, 16:31 ET, Last post: Sep. 27 2006, 04:57 ET)
Homemade barrel  (Started: Sep. 19 2006, 05:11 ET, Last post: Sep. 23 2006, 23:29 ET)
Is it possible?
Firing pins  (Started: Sep. 5 2006, 22:20 ET, Last post: Sep. 6 2006, 01:50 ET)
Interesting anomoly
Truing recoil lug with lathe  (Started: Aug. 11 2006, 11:44 ET, Last post: Sep. 5 2006, 12:47 ET)
Changing a m44 mosin nagant barrel  (Started: Sep. 2 2006, 20:47 ET, Last post: Sep. 4 2006, 06:30 ET)
Home made guns solomans etc  (Started: Sep. 2 2006, 02:40 ET, Last post: Sep. 2 2006, 02:40 ET)
Home made
How does a suppressor work!!!  (Started: Mar. 14 2006, 14:53 ET, Last post: Aug. 27 2006, 13:46 ET)
rfling  (Started: May 23 2004, 06:15 ET, Last post: Aug. 25 2006, 21:47 ET)
barrel
Replace fire pin-22 cal winchester mod. 150  (Started: Aug. 22 2006, 14:24 ET, Last post: Aug. 22 2006, 17:56 ET)
Replace fire pin
Rebarrel marlin 1894  (Started: Aug. 19 2006, 16:20 ET, Last post: Aug. 21 2006, 20:11 ET)
Cutting on a fiberglass stock  (Started: May 26 2006, 18:26 ET, Last post: Aug. 21 2006, 13:29 ET)
Tips, pointers, suggestions
Savage 340 / weaver base ???  (Started: Aug. 15 2006, 13:46 ET, Last post: Aug. 15 2006, 23:48 ET)
M700 bolt dimensions  (Started: Aug. 12 2006, 10:34 ET, Last post: Aug. 13 2006, 15:21 ET)
Do you have the corect dimensions
Truing recoil lug with lathe  (Started: Aug. 11 2006, 11:46 ET, Last post: Aug. 11 2006, 11:46 ET)
Home gunsmithing
Jaco western pistol .22lr  (Started: Aug. 6 2006, 19:52 ET, Last post: Aug. 7 2006, 13:02 ET)
Convert to rifle?
Metal hardening question  (Started: Jul. 17 2006, 13:00 ET, Last post: Jul. 19 2006, 14:35 ET)
1911  (Started: Jul. 11 2006, 17:31 ET, Last post: Jul. 14 2006, 13:09 ET)
1911
H&k 3 lug question  (Started: Jul. 12 2006, 05:49 ET, Last post: Jul. 14 2006, 07:52 ET)
Srry  (Started: Jul. 12 2006, 19:06 ET, Last post: Jul. 13 2006, 11:45 ET)
Just a joke
9mm  (Started: Jul. 12 2006, 18:22 ET, Last post: Jul. 12 2006, 18:56 ET)
9mm sub
I had this idea for turning down a barrel...  (Started: Apr. 24 2006, 18:00 ET, Last post: Jul. 3 2006, 22:41 ET)
Downloadable gun manuals  (Started: May 17 2006, 10:50 ET, Last post: Jul. 3 2006, 18:53 ET)
Modifying a savage short action to feed short mags  (Started: Jul. 1 2006, 19:28 ET, Last post: Jul. 1 2006, 23:24 ET)
Atten:mac owners,brl to blt /rec question..  (Started: Jun. 10 2006, 15:40 ET, Last post: Jun. 12 2006, 19:04 ET)
Need tech advice about my m11 9
Bending from a flat?  (Started: Mar. 1 2006, 11:05 ET, Last post: May 25 2006, 08:15 ET)
Sheet metal bending techniques
Learning process  (Started: May 17 2006, 04:18 ET, Last post: May 17 2006, 18:15 ET)
S&w 32 revolver pring  (Started: Apr. 25 2006, 09:55 ET, Last post: May 12 2006, 16:14 ET)
Tools to build a .22 rf  (Started: May 4 2006, 06:56 ET, Last post: May 4 2006, 11:17 ET)
Help please
Mac 11/9 charging difficulties  (Started: Mar. 22 2006, 21:53 ET, Last post: May 1 2006, 05:51 ET)
Re-cutting mauser internal ring  (Started: Apr. 6 2006, 22:06 ET, Last post: Apr. 21 2006, 23:09 ET)
Max slide weight/spring tension for a .22lr  (Started: Jan. 22 2006, 01:33 ET, Last post: Apr. 20 2006, 00:09 ET)
Naa blackpowder mini revolvers  (Started: Dec. 28 2004, 17:17 ET, Last post: Apr. 12 2006, 19:45 ET)
Anyone have one?
Mp5k  (Started: Mar. 31 2006, 00:20 ET, Last post: Apr. 12 2006, 11:08 ET)
Who knows how to build one
22 pistol barrel liner  (Started: Apr. 9 2006, 02:25 ET, Last post: Apr. 9 2006, 02:25 ET)
Tensioned barrel in a rifle  (Started: Feb. 24 2006, 14:46 ET, Last post: Apr. 2 2006, 11:46 ET)
Anyone sell mac10 lowers?  (Started: Apr. 1 2006, 09:50 ET, Last post: Apr. 1 2006, 10:53 ET)
Ready for first ak build  (Started: Mar. 15 2006, 12:16 ET, Last post: Mar. 16 2006, 07:49 ET)
Storm lakes barrels or ????  (Started: Mar. 10 2006, 08:42 ET, Last post: Mar. 12 2006, 11:11 ET)
Mac 11/9 runaway fire concerns  (Started: Mar. 9 2006, 16:51 ET, Last post: Mar. 10 2006, 08:25 ET)
Safety issue
Remington actions  (Started: Mar. 8 2006, 14:00 ET, Last post: Mar. 8 2006, 17:18 ET)
Scratch-built Carbine Concept  (Started: Aug. 1 2003, 10:15 ET, Last post: Mar. 8 2006, 02:07 ET)
Gunsmithing?  (Started: Feb. 23 2006, 22:38 ET, Last post: Feb. 28 2006, 20:06 ET)
Sten mk iii kit disassmblie  (Started: Feb. 25 2006, 18:20 ET, Last post: Feb. 28 2006, 13:58 ET)
Filling pits in an old c&r  (Started: Jan. 21 2006, 12:37 ET, Last post: Feb. 25 2006, 18:15 ET)
M14 front sight dovetail?  (Started: Feb. 20 2006, 14:23 ET, Last post: Feb. 21 2006, 15:23 ET)
Aluminum frame for jaco derringer  (Started: Feb. 18 2006, 20:38 ET, Last post: Feb. 19 2006, 11:18 ET)
Would 6061 be suitable?
Bolt timing  (Started: Feb. 5 2006, 18:05 ET, Last post: Feb. 18 2006, 21:46 ET)
Sporterizing a garand?  (Started: Oct. 31 2004, 22:31 ET, Last post: Feb. 7 2006, 02:51 ET)
Want to find a guide to sporterizing
How to re-line .22 barrel?  (Started: Feb. 1 2006, 09:49 ET, Last post: Feb. 5 2006, 11:07 ET)
Gunsmith courses  (Started: Dec. 20 2005, 23:05 ET, Last post: Jan. 25 2006, 22:32 ET)
How much is agi's full course?
Need some help falling block actions  (Started: Jan. 19 2006, 23:23 ET, Last post: Jan. 21 2006, 23:13 ET)
Win model 70 action screw questions  (Started: Jan. 18 2006, 12:52 ET, Last post: Jan. 19 2006, 14:19 ET)
44cannon-poster board & fiberglass resin frame  (Started: Nov. 2 2005, 17:48 ET, Last post: Jan. 19 2006, 09:10 ET)
Questions, please advise
Results from my first barrel project  (Started: Jan. 6 2006, 21:31 ET, Last post: Jan. 11 2006, 12:13 ET)
Stock duplicator advice  (Started: Nov. 22 2005, 20:57 ET, Last post: Jan. 10 2006, 14:27 ET)
Looking for a duplicator
A DO-IT-YOURSELF SUBMACHINE GUN book  (Started: Dec. 3 2003, 22:43 ET, Last post: Jan. 7 2006, 17:42 ET)
Your opinion on this book?
Heat treating?  (Started: Jan. 4 2006, 20:25 ET, Last post: Jan. 4 2006, 21:20 ET)
Resulting rockwell?
What kind of steel to use for small .22?  (Started: Aug. 8 2005, 13:29 ET, Last post: Jan. 1 2006, 11:55 ET)
How i thread a barrel  (Started: Dec. 15 2005, 16:10 ET, Last post: Dec. 28 2005, 21:46 ET)
M1 carbine  (Started: Dec. 24 2005, 15:17 ET, Last post: Dec. 28 2005, 14:59 ET)
Rebarrel to 5.7mm johnson/.22spitfire
Sight threads - oversizing  (Started: Dec. 17 2005, 11:22 ET, Last post: Dec. 17 2005, 22:46 ET)
Feg pa-63 do anything manual?  (Started: Dec. 13 2005, 11:26 ET, Last post: Dec. 16 2005, 10:41 ET)
Homemade adjustable sights  (Started: Oct. 23 2005, 13:44 ET, Last post: Nov. 23 2005, 20:34 ET)
Browning hi-power questions.  (Started: Oct. 16 2005, 18:07 ET, Last post: Nov. 23 2005, 11:53 ET)
Heavy duty work bench  (Started: Nov. 19 2005, 09:50 ET, Last post: Nov. 21 2005, 00:08 ET)
What works best for smithing????
Remington 700 blueprints  (Started: Jun. 9 2005, 12:11 ET, Last post: Nov. 16 2005, 03:59 ET)
Winchester 1200  (Started: Nov. 2 2005, 20:05 ET, Last post: Nov. 3 2005, 02:01 ET)
Mag tube removal
Rear sight removal  (Started: Jul. 16 2005, 23:41 ET, Last post: Oct. 22 2005, 18:54 ET)
Which way to drift sight
my posts in the scratch built carbine thread  (Started: Sep. 24 2003, 15:02 ET, Last post: Oct. 19 2005, 14:36 ET)
are messed up
Brazing double ribs  (Started: Sep. 11 2005, 14:20 ET, Last post: Oct. 18 2005, 12:10 ET)
How to?
Anyone built a mac?  (Started: Oct. 9 2004, 02:03 ET, Last post: Sep. 23 2005, 21:58 ET)
anyone?
Slide extender  (Started: Sep. 6 2005, 00:55 ET, Last post: Sep. 12 2005, 16:06 ET)
What is it & how can i use it.  be nice
Recoil booster/ inertial decoupler/ nielsen device  (Started: Aug. 30 2005, 08:45 ET, Last post: Sep. 3 2005, 17:39 ET)
Know how to make one?
.45 acp magazine help  (Started: Aug. 22 2005, 22:50 ET, Last post: Aug. 28 2005, 20:28 ET)
Dimensions for magazines
Mac 11/9  (Started: Jul. 9 2005, 14:22 ET, Last post: Jul. 29 2005, 13:42 ET)
That looks like a skorpion.
First project  (Started: Jan. 18 2005, 23:52 ET, Last post: Jul. 19 2005, 09:21 ET)
Want to build a martini-henry in .22
A place for oddball parts  (Started: Jul. 9 2005, 07:40 ET, Last post: Jul. 9 2005, 07:40 ET)
Paladin press 'improvised weapons' series  (Started: Nov. 6 2004, 03:17 ET, Last post: Jul. 8 2005, 23:37 ET)
Anyone know the book they were from?
Sheet metal 3-ply pistol frames from scratch  (Started: May 30 2005, 22:25 ET, Last post: Jun. 9 2005, 23:10 ET)
H&k  (Started: Feb. 24 2005, 11:29 ET, Last post: May 26 2005, 23:41 ET)
How h&k start off building...
Best place to get sccrews for ak build?  (Started: Apr. 26 2005, 14:23 ET, Last post: May 26 2005, 23:17 ET)
Barrel contouring help!!!  (Started: May 26 2005, 10:43 ET, Last post: May 26 2005, 22:06 ET)
Springs  (Started: Apr. 27 2005, 09:42 ET, Last post: May 26 2005, 15:53 ET)
Springs
.22 barrels  (Started: May 7 2005, 08:35 ET, Last post: May 19 2005, 10:21 ET)
Crossbow  (Started: May 15 2005, 13:52 ET, Last post: May 19 2005, 03:00 ET)
S&w mod 19-4  (Started: May 19 2005, 00:56 ET, Last post: May 19 2005, 00:56 ET)
Barrel question
Barrel blanks cont.  (Started: Apr. 19 2005, 18:34 ET, Last post: May 18 2005, 16:03 ET)
Poly-choke installation??  (Started: Jan. 21 2005, 22:47 ET, Last post: May 8 2005, 13:50 ET)
Skorpion and skorpion receivers  (Started: Apr. 29 2005, 20:40 ET, Last post: May 1 2005, 11:57 ET)
Removing m14 barrel  (Started: Apr. 23 2005, 00:59 ET, Last post: Apr. 27 2005, 17:35 ET)
Chambering  (Started: Apr. 11 2005, 08:08 ET, Last post: Apr. 20 2005, 23:02 ET)
Cutting speed
Mac 10 barrel  (Started: Apr. 6 2005, 06:14 ET, Last post: Apr. 11 2005, 08:58 ET)
Changing the barrel
A couple of questions.  (Started: Apr. 5 2005, 19:36 ET, Last post: Apr. 6 2005, 14:46 ET)
Junky ar rifle gave me an idea...  (Started: Mar. 25 2005, 02:34 ET, Last post: Mar. 30 2005, 02:17 ET)
And i finally joined the forum.
Cutting down a pistol barrel  (Started: Mar. 15 2005, 22:19 ET, Last post: Mar. 24 2005, 17:24 ET)
P17 enfield front site slot  (Started: Mar. 15 2005, 01:08 ET, Last post: Mar. 15 2005, 01:08 ET)
Source for 'smithing manual  (Started: Mar. 12 2005, 20:50 ET, Last post: Mar. 12 2005, 20:50 ET)
Australian automatic arms  (Started: Feb. 22 2005, 02:10 ET, Last post: Mar. 12 2005, 08:08 ET)
Simple ar type weapon for home smith!
Site with exploded drawings...  (Started: Mar. 10 2005, 21:02 ET, Last post: Mar. 11 2005, 01:25 ET)
Pretty self explanatory!
Gunsmith group on state level  (Started: Jan. 14 2005, 10:36 ET, Last post: Mar. 10 2005, 20:59 ET)
Gunsmith group on state level
M1 carbine demills...?  (Started: Mar. 5 2005, 01:58 ET, Last post: Mar. 9 2005, 21:44 ET)
16" barreled SKS  (Started: Dec. 5 2003, 08:39 ET, Last post: Feb. 25 2005, 15:29 ET)
Source needed (damaged 80% ar lowers)  (Started: Jan. 5 2005, 17:15 ET, Last post: Feb. 19 2005, 22:35 ET)
Bill holmes single shot pistol  (Started: Feb. 7 2005, 19:18 ET, Last post: Feb. 16 2005, 11:38 ET)
Has anyone built with the sqr. breech?
Alibre cad / cam software  (Started: Jan. 7 2005, 13:11 ET, Last post: Feb. 10 2005, 19:11 ET)
Does anyone use it? have comments?
Fac derringer conversion  (Started: Feb. 1 2005, 12:34 ET, Last post: Feb. 10 2005, 01:06 ET)
I feel guilty  (Started: Feb. 9 2005, 21:09 ET, Last post: Feb. 9 2005, 21:29 ET)
Soumi m31 and tec9/ap9 semi carbine?  (Started: Jan. 20 2005, 12:27 ET, Last post: Feb. 4 2005, 00:41 ET)
1-2-3  (Started: Jan. 31 2005, 17:11 ET, Last post: Feb. 2 2005, 08:21 ET)
What is it
Detachable magazine modifications  (Started: Dec. 28 2004, 10:39 ET, Last post: Jan. 26 2005, 14:13 ET)
Adding mags to bolt or pump rifles
Sights for cz52  (Started: Nov. 20 2004, 12:41 ET, Last post: Jan. 25 2005, 20:43 ET)
M-1carbine  (Started: Jan. 19 2005, 13:12 ET, Last post: Jan. 19 2005, 15:48 ET)
Problem
Gunsmithing table or fixtures  (Started: Jan. 3 2005, 14:11 ET, Last post: Jan. 3 2005, 16:28 ET)
Gunsmithing furnature and fixtures
solid modeling software  (Started: Aug. 9 2004, 21:59 ET, Last post: Jan. 3 2005, 13:41 ET)
what's best?
New barrel  (Started: Dec. 2 2004, 20:33 ET, Last post: Dec. 31 2004, 15:28 ET)
My first barrel
Burris signature zee rings  (Started: Dec. 21 2004, 09:26 ET, Last post: Dec. 28 2004, 18:48 ET)
Screw sizes
Building 10/22  (Started: Dec. 28 2004, 02:39 ET, Last post: Dec. 28 2004, 11:16 ET)
simple first project for beginer  (Started: Oct. 15 2004, 13:41 ET, Last post: Dec. 27 2004, 20:43 ET)
Polishing bolts/actions  (Started: Dec. 23 2004, 15:18 ET, Last post: Dec. 24 2004, 17:05 ET)
Remington 700 blueprint  (Started: Nov. 3 2004, 14:18 ET, Last post: Dec. 20 2004, 11:08 ET)
Anyone have one?
Barrel blanks  (Started: Nov. 28 2004, 11:29 ET, Last post: Dec. 9 2004, 13:37 ET)
Pillar bedding 91/30 mosin nagant  (Started: Dec. 3 2004, 09:03 ET, Last post: Dec. 4 2004, 23:23 ET)
Picture of glass bedding and pillars
Aligning two piece weaver mounts  (Started: Nov. 25 2004, 11:37 ET, Last post: Nov. 26 2004, 01:13 ET)
To avoid lapping rings
Wtb used home study course  (Started: Nov. 15 2004, 23:45 ET, Last post: Nov. 16 2004, 03:40 ET)
Bedding  (Started: Nov. 4 2004, 22:08 ET, Last post: Nov. 4 2004, 22:08 ET)
Browning bar
AR-15 lower with a homemade .22LR bolt  (Started: Oct. 26 2004, 12:33 ET, Last post: Oct. 29 2004, 11:48 ET)
blow back
First project  (Savage M 219)  (Started: Oct. 24 2004, 04:53 ET, Last post: Oct. 27 2004, 19:04 ET)
10/22  (Started: Oct. 27 2004, 14:58 ET, Last post: Oct. 27 2004, 14:58 ET)
parts needed
Help needed with derringer build...  (Started: Oct. 27 2004, 03:12 ET, Last post: Oct. 27 2004, 14:21 ET)
Require assistance
G3 Front Sight Canted...Help!  (Started: Oct. 25 2004, 18:35 ET, Last post: Oct. 26 2004, 17:44 ET)
Problems reaming chamber  (Started: Oct. 5 2004, 12:29 ET, Last post: Oct. 22 2004, 23:16 ET)
Reamer not cutting round
Ruger MK1 Grip frame  (Started: Oct. 19 2004, 17:42 ET, Last post: Oct. 22 2004, 11:20 ET)
I need to get a hold of one...
anybody working beretta 38?  (Started: Aug. 5 2004, 20:04 ET, Last post: Oct. 22 2004, 00:08 ET)
Australians watch out  (Started: Oct. 17 2004, 22:43 ET, Last post: Oct. 18 2004, 03:30 ET)
FYI,info on 10-22 .17 Mach 2 conversions  (Started: Oct. 14 2004, 00:33 ET, Last post: Oct. 14 2004, 00:33 ET)
barrel rib  (Started: Oct. 8 2004, 10:00 ET, Last post: Oct. 8 2004, 10:00 ET)
how to
Looking for 10/22 magnum prints  (Started: Oct. 6 2004, 14:48 ET, Last post: Oct. 6 2004, 14:48 ET)
Four years in HM Prisons for this???  (Started: Jan. 9 2004, 02:11 ET, Last post: Oct. 6 2004, 02:12 ET)
He has paid enough to make his point.
AK receiver thickness  (Started: Sep. 30 2004, 16:02 ET, Last post: Oct. 4 2004, 09:39 ET)
.040" or .060"?
savage trigger  (Started: Sep. 25 2004, 14:35 ET, Last post: Oct. 1 2004, 12:13 ET)
Sten receiver  (Started: Sep. 28 2004, 14:01 ET, Last post: Sep. 30 2004, 16:03 ET)
Do I need to heat treat a Sten receiver?
AK issues  (Started: Sep. 28 2004, 14:10 ET, Last post: Sep. 29 2004, 17:08 ET)
How to heat treat it and drilling
Anybody try a Dragunov (psl) yet?  (Started: Sep. 16 2004, 12:38 ET, Last post: Sep. 28 2004, 11:19 ET)
Hypothetical: Serial number removal..OOPS  (Started: Sep. 6 2004, 17:42 ET, Last post: Sep. 25 2004, 00:05 ET)
Only good intentions!
AMD Pistol Build  (Started: Sep. 23 2004, 09:23 ET, Last post: Sep. 24 2004, 10:55 ET)
Krink Clone
Guns of the Kaliban  (Started: Aug. 27 2004, 23:15 ET, Last post: Sep. 13 2004, 01:10 ET)
or, how to have fun in Cali...
Remington M1 mag conversion  (Started: Jul. 31 2004, 15:16 ET, Last post: Sep. 9 2004, 18:29 ET)
Also need help finding a barreled action
duty tune a colt trooper MK-3  (Started: Aug. 28 2004, 03:45 ET, Last post: Sep. 8 2004, 04:13 ET)
any advice an smoothing the trigger
FAL lower reciever plans  (Started: Sep. 2 2004, 14:06 ET, Last post: Sep. 3 2004, 09:55 ET)
Receiver Truing  (Started: Apr. 22 2004, 05:03 ET, Last post: Sep. 2 2004, 23:28 ET)
Again?
Win. 94 Angle Eject  (Started: Aug. 27 2004, 00:12 ET, Last post: Aug. 27 2004, 17:40 ET)
Anybody conerted .30-30 to .444 Marlin
.410 pistol  (Started: Jul. 7 2004, 18:39 ET, Last post: Aug. 21 2004, 02:34 ET)
Scope base!!  (Started: Jul. 26 2004, 19:48 ET, Last post: Aug. 12 2004, 01:27 ET)
Placing scope base
How easy to assemble the G3?  (Started: Jul. 27 2004, 18:50 ET, Last post: Jul. 30 2004, 12:41 ET)
AR15 lower for 50 BMG upoper  (Started: Jul. 9 2004, 19:39 ET, Last post: Jul. 12 2004, 20:49 ET)
Taurus PT-25 build  (Started: Jul. 8 2004, 17:06 ET, Last post: Jul. 8 2004, 17:06 ET)
anyone done anything like it?
Mauser Advice Wanted  (Started: Jul. 4 2004, 22:56 ET, Last post: Jul. 6 2004, 20:57 ET)
What to do
Reaming question  (Started: Jun. 23 2004, 00:20 ET, Last post: Jun. 24 2004, 20:18 ET)
Reaming to new caliber, & have a problem
Rem 870 Exprees Barrel Ques.  (Started: Jun. 24 2004, 13:53 ET, Last post: Jun. 24 2004, 18:42 ET)
Will an Exp bbl fit on non-Express 870?
Ruger Vaquero barrel fix  (Started: Jun. 15 2004, 13:23 ET, Last post: Jun. 23 2004, 18:29 ET)
Damage in 1st 1 inch of barrel
Springfield 1911 Mil Spec Ejector  (Started: Jun. 22 2004, 21:53 ET, Last post: Jun. 22 2004, 22:46 ET)
Savage Rifle Model 93 trigger pressure  (Started: Jun. 19 2004, 20:11 ET, Last post: Jun. 21 2004, 16:00 ET)
Savage Rifle trigger adjustment
chamber reemers  (Started: May 21 2004, 14:00 ET, Last post: Jun. 20 2004, 16:30 ET)
chamber reemers
for the attn 1911fan  (Started: Jun. 8 2004, 00:32 ET, Last post: Jun. 9 2004, 18:34 ET)
AGI
UZI Build  (Started: Jun. 1 2004, 17:13 ET, Last post: Jun. 8 2004, 01:17 ET)
80% build up, and storage out of state question.  (Started: Jun. 1 2004, 07:58 ET, Last post: Jun. 7 2004, 14:24 ET)
can i do it?
David Malta Europe  (Started: Jun. 6 2004, 05:19 ET, Last post: Jun. 6 2004, 05:19 ET)
I like to buy AGI video
Where would I Start?  (Started: May 26 2004, 16:04 ET, Last post: Jun. 4 2004, 14:18 ET)
AGI Gunsmithing videos (and others) for sale  (Started: Jun. 4 2004, 10:45 ET, Last post: Jun. 4 2004, 11:13 ET)
Cleaning out the shop
Revolver or small auto reciever  (Started: Jun. 1 2004, 12:24 ET, Last post: Jun. 4 2004, 02:14 ET)
Will or Does anyone make 80% for these
81% Receiver Question  (Started: Jun. 26 2003, 16:12 ET, Last post: May 30 2004, 06:30 ET)
Legalities after you start 80% build.
What tools are needed for diy pen zip gun  (Started: May 25 2004, 13:00 ET, Last post: May 27 2004, 12:36 ET)
long fefile  (Started: May 24 2004, 08:05 ET, Last post: May 24 2004, 12:43 ET)
refile barel
Dismantling spot welded parts...  (Started: May 5 2004, 20:14 ET, Last post: May 7 2004, 22:54 ET)
Your technique?
.50 section  (Started: May 5 2004, 05:54 ET, Last post: May 6 2004, 22:45 ET)
building singleshot pistol  (Started: May 1 2004, 03:14 ET, Last post: May 4 2004, 22:52 ET)
Test Firing for the Home Smith  (Started: Sep. 14 2002, 18:46 ET, Last post: May 3 2004, 11:51 ET)
Hope the neighbors don't mind
barrel fitting  (Started: Apr. 28 2004, 00:54 ET, Last post: May 2 2004, 12:16 ET)
one way
Barrel Threads - Ruger 10 / 22  (Started: Apr. 22 2004, 04:45 ET, Last post: May 2 2004, 11:54 ET)
Forcing cone polishing  (Started: Apr. 30 2004, 02:26 ET, Last post: Apr. 30 2004, 23:43 ET)
Guns for films  (Started: Feb. 15 2004, 10:07 ET, Last post: Apr. 29 2004, 22:11 ET)
Films
Mauser VS. rem 700  (Started: Apr. 7 2004, 16:07 ET, Last post: Apr. 27 2004, 11:55 ET)
inlet stock Dims
Recommendations on barrels for KTP228  (Started: Nov. 1 2002, 14:58 ET, Last post: Apr. 26 2004, 01:52 ET)
Had to Loctite the "adjustable" rear sight  (Started: Apr. 12 2003, 20:32 ET, Last post: Apr. 25 2004, 19:22 ET)
of a Phoenix HP22, and now it groups
Shotgun bead question  (Started: Nov. 26 2003, 18:09 ET, Last post: Apr. 25 2004, 16:25 ET)
Lapping Slides  (Started: Jan. 12 2004, 10:23 ET, Last post: Apr. 25 2004, 16:11 ET)
Frame / Slide fittings
norrell moly resin  (Started: Sep. 17 2002, 13:17 ET, Last post: Apr. 25 2004, 13:32 ET)
glock lower
Howa 1500 Barrel Threads  (Started: Apr. 22 2004, 04:43 ET, Last post: Apr. 22 2004, 14:10 ET)
MAC 10 UZI  (Started: Feb. 26 2004, 13:38 ET, Last post: Apr. 19 2004, 13:20 ET)
Plating Kits by Micro-Mark  (Started: Apr. 14 2004, 02:58 ET, Last post: Apr. 16 2004, 01:36 ET)
Are they any good?
Oversize Chamber  (Started: Apr. 6 2004, 04:19 ET, Last post: Apr. 15 2004, 15:48 ET)
Winchester barrel question -  (Started: Oct. 24 2003, 12:49 ET, Last post: Apr. 15 2004, 12:21 ET)
Models 92 and 94
for the att geodkyt from david  (Started: Mar. 2 2004, 13:36 ET, Last post: Apr. 14 2004, 15:14 ET)
Rifle Bolt Swirls  (Started: Apr. 13 2004, 17:13 ET, Last post: Apr. 14 2004, 06:43 ET)
Savage Striker info ..  (Started: Apr. 12 2004, 06:17 ET, Last post: Apr. 13 2004, 00:15 ET)
Doesn't anyone know?
Gunsmithing Legalities  (Started: Apr. 10 2004, 11:13 ET, Last post: Apr. 12 2004, 19:00 ET)
Complete slide/barrel assemblies  (Started: Apr. 5 2004, 16:39 ET, Last post: Apr. 6 2004, 22:57 ET)
Building the semi-auto beretta 38A  (Started: Aug. 19 2003, 21:24 ET, Last post: Apr. 6 2004, 13:47 ET)
XP100 case extraction problem  (Started: Mar. 29 2004, 11:26 ET, Last post: Apr. 5 2004, 15:57 ET)
M203 front mount for ar-15?  (Started: Feb. 10 2004, 22:14 ET, Last post: Apr. 3 2004, 03:01 ET)
navel jelly?  (Started: Apr. 1 2004, 11:14 ET, Last post: Apr. 2 2004, 01:43 ET)
Chambering barrel on glued actions  (Started: Mar. 18 2004, 21:58 ET, Last post: Mar. 31 2004, 16:05 ET)
Ruger MKII  (Started: Mar. 29 2004, 23:19 ET, Last post: Mar. 29 2004, 23:19 ET)
Safety assembly
Savage Striker Rechambering  (Started: Mar. 29 2004, 11:21 ET, Last post: Mar. 29 2004, 11:21 ET)
Building bug  (Started: Mar. 22 2004, 19:43 ET, Last post: Mar. 22 2004, 22:04 ET)
Savage Striker vs Savage 110  (Started: Mar. 18 2004, 13:20 ET, Last post: Mar. 18 2004, 13:20 ET)
Rechambering data
Homebuilt Revolvers?  (Started: Mar. 17 2004, 12:33 ET, Last post: Mar. 18 2004, 09:31 ET)
Anyone?
SKS FlashHider In Cali?  (Started: Mar. 1 2004, 14:06 ET, Last post: Mar. 17 2004, 18:19 ET)
Shooting to the Left  (Started: Mar. 13 2004, 17:44 ET, Last post: Mar. 15 2004, 19:38 ET)
Fixed sighted revolver what can I do?
.45 LC/ .410 Derringer Kits  (Started: Jan. 21 2004, 19:10 ET, Last post: Mar. 15 2004, 06:47 ET)
A Few Questions....
Black powder conversions  (Started: Mar. 13 2004, 03:32 ET, Last post: Mar. 13 2004, 04:25 ET)
draw reamers  (Started: Mar. 11 2004, 21:19 ET, Last post: Mar. 11 2004, 21:19 ET)
anybody using draw reamers
Homemade Headspacing thingymajigs  (Started: Feb. 22 2004, 12:36 ET, Last post: Mar. 11 2004, 21:10 ET)
Early release  (Started: Mar. 5 2004, 21:36 ET, Last post: Mar. 6 2004, 02:15 ET)
I like to building from screech a semi automatic  (Started: Feb. 29 2004, 02:11 ET, Last post: Mar. 5 2004, 19:31 ET)
hi rick  (Started: Mar. 2 2004, 13:46 ET, Last post: Mar. 2 2004, 13:46 ET)
For the attn geodkyt from David  (Started: Mar. 2 2004, 10:28 ET, Last post: Mar. 2 2004, 13:28 ET)
Ruger Bearcat landyard  (Started: Feb. 27 2004, 09:26 ET, Last post: Feb. 27 2004, 18:20 ET)
crowning w/lathe  (Started: Aug. 7 2003, 14:41 ET, Last post: Feb. 18 2004, 22:38 ET)
need an idiots guide
making v-springs?  (Started: Jan. 20 2004, 15:07 ET, Last post: Feb. 16 2004, 23:09 ET)
parts replacement
What can i build with just a drill press?  (Started: Jan. 4 2004, 21:25 ET, Last post: Feb. 16 2004, 20:44 ET)
Hey Blindhogg  (Started: Feb. 14 2004, 13:43 ET, Last post: Feb. 16 2004, 20:28 ET)
Ruger #1 trigger adjustment procedures???  (Started: Feb. 16 2004, 12:20 ET, Last post: Feb. 16 2004, 12:20 ET)
Trigger job on Remington 600?  (Started: Feb. 13 2004, 18:11 ET, Last post: Feb. 13 2004, 19:54 ET)
Would someone walk me through it?
Semi-auto Thompson?  (Started: Jan. 3 2004, 10:03 ET, Last post: Jan. 27 2004, 21:23 ET)
From a parts kit?
Ackley Improved chambers  (Started: Jan. 13 2004, 22:34 ET, Last post: Jan. 21 2004, 22:10 ET)
reamers required
New guy with a question  (Started: Dec. 5 2003, 22:27 ET, Last post: Jan. 14 2004, 19:26 ET)
bolt forging
location to purchase 80% or less frames?  (Started: Jan. 11 2004, 22:41 ET, Last post: Jan. 12 2004, 12:50 ET)
Questions  (Started: Jan. 9 2004, 17:04 ET, Last post: Jan. 10 2004, 10:20 ET)
lost dazed and confused
fake silencer  (Started: Jan. 4 2004, 15:28 ET, Last post: Jan. 5 2004, 11:44 ET)
Mossberg 500 problems  (Started: Nov. 27 2003, 08:38 ET, Last post: Jan. 1 2004, 17:38 ET)
Trigger guard & safety
Dissassembly info for EAA/Baikal SxS shotguns  (Started: Dec. 19 2003, 10:45 ET, Last post: Dec. 20 2003, 22:37 ET)
Roll pin holders and punches  (Started: Oct. 14 2002, 23:13 ET, Last post: Dec. 20 2003, 15:12 ET)
Are these difficult to make?
Tapping a S&W Mod 29 for scope  (Started: Dec. 19 2003, 14:01 ET, Last post: Dec. 19 2003, 14:01 ET)
Makoarov frames  (Started: Dec. 18 2003, 11:52 ET, Last post: Dec. 18 2003, 11:52 ET)
Does anyone make blanks
good or bad UZI kits  (Started: Dec. 11 2003, 02:42 ET, Last post: Dec. 12 2003, 13:57 ET)
Small pistol frames, anybody intersted?Icame  (Started: Nov. 29 2003, 19:24 ET, Last post: Dec. 11 2003, 14:09 ET)
Need finished
Regarding Métral  (Started: Dec. 6 2003, 10:02 ET, Last post: Dec. 6 2003, 10:02 ET)
troble posting
What does this fit?  (Started: Nov. 29 2003, 18:46 ET, Last post: Nov. 29 2003, 19:08 ET)
Trigger housing found at gun show
7.62x54mm Enfield  (Started: Oct. 25 2003, 18:36 ET, Last post: Nov. 24 2003, 09:27 ET)
Trapdoor Springfield/Snider action  (Started: Oct. 8 2003, 22:13 ET, Last post: Nov. 22 2003, 12:52 ET)
Barrel vise  (Started: Nov. 12 2003, 07:04 ET, Last post: Nov. 21 2003, 03:20 ET)
from pipe vise??
converting a blackpowder revolver to .45 LC  (Started: Oct. 20 2003, 20:34 ET, Last post: Nov. 21 2003, 02:33 ET)
Scratch-built .410 semi-auto shotgun  (Started: Oct. 27 2003, 19:23 ET, Last post: Nov. 18 2003, 10:17 ET)
Sten Bolt Conversion  (Started: Nov. 15 2003, 22:49 ET, Last post: Nov. 18 2003, 09:27 ET)
Found this, but would it work?
Mossberg 500 Question  (Started: Nov. 14 2003, 19:33 ET, Last post: Nov. 15 2003, 15:37 ET)
SPECTRE magazine  (Started: Nov. 1 2003, 02:49 ET, Last post: Nov. 11 2003, 14:36 ET)
What Tools And Training Are Needed  (Started: Nov. 1 2003, 18:57 ET, Last post: Nov. 10 2003, 16:31 ET)
New Gunsmith
My next project  (Started: Nov. 2 2003, 20:55 ET, Last post: Nov. 2 2003, 20:55 ET)
Need help with Mossberg 500 trigger group  (Started: Oct. 31 2003, 21:01 ET, Last post: Nov. 1 2003, 05:13 ET)
it WAS a gunsmithing operation
9mm Mini-14?  (Started: Oct. 25 2003, 22:37 ET, Last post: Oct. 28 2003, 03:24 ET)
Or keep using it as boat paddle?
Sten mags in an UZI?  (Started: Oct. 19 2003, 20:42 ET, Last post: Oct. 28 2003, 02:55 ET)
Can it be done?
Semi Auto sten kits  (Started: Oct. 28 2003, 00:29 ET, Last post: Oct. 28 2003, 00:29 ET)
Group buy on kits
ZB-26/30 mag  (Started: Oct. 25 2003, 11:29 ET, Last post: Oct. 25 2003, 11:29 ET)
making one
mac -10 clones  (Started: Sep. 27 2003, 17:03 ET, Last post: Oct. 23 2003, 10:22 ET)
whats the skinny?
Needed for a MAC lower?  (Started: Oct. 15 2003, 17:24 ET, Last post: Oct. 21 2003, 18:05 ET)
Sten II Kits  (Started: Oct. 19 2003, 23:25 ET, Last post: Oct. 19 2003, 23:25 ET)
whos got them?
STEN bolt-no milling machine needed  (Started: Oct. 15 2003, 00:09 ET, Last post: Oct. 18 2003, 16:51 ET)
I need a .dwg of an AK47 Magazine  (Started: Aug. 17 2003, 12:14 ET, Last post: Oct. 15 2003, 11:08 ET)
sten III kit reciever tabs  (Started: Oct. 13 2003, 15:27 ET, Last post: Oct. 14 2003, 15:54 ET)
how important are they?
Vz61 Skorpion  (Started: Sep. 16 2003, 21:22 ET, Last post: Oct. 13 2003, 21:41 ET)
Receivers?
Wtk: peep or ghost ring pistol sights?  (Started: May 11 2002, 01:09 ET, Last post: Oct. 13 2003, 12:00 ET)
What is the straight dope on these?
Bill Holmes MP83A1  (Started: Jul. 19 2003, 10:34 ET, Last post: Oct. 5 2003, 10:23 ET)
Homebuilt from scratch gun
Blue Wonder Gun Blue  (Started: Oct. 16 2002, 22:01 ET, Last post: Sep. 24 2003, 18:23 ET)
Freebies for the first 15!!!
Polishing barrels  (Started: Sep. 16 2003, 19:59 ET, Last post: Sep. 16 2003, 21:30 ET)
I want to bend my stock  (Started: Sep. 8 2003, 13:14 ET, Last post: Sep. 15 2003, 14:50 ET)
http://www.cerroSuppliers of Cast frames/receivers  (Started: Jun. 5 2003, 23:04 ET, Last post: Sep. 11 2003, 09:07 ET)
CZ 527 Carbine Trigger Troubles  (Started: Aug. 29 2003, 02:39 ET, Last post: Aug. 29 2003, 11:07 ET)
Set trigger unsets
Home built front rest  (Started: Jul. 27 2003, 19:59 ET, Last post: Aug. 28 2003, 23:24 ET)
What's a good barrel thread?  (Started: Aug. 16 2003, 16:29 ET, Last post: Aug. 27 2003, 16:07 ET)
working on the scratch carbine
What could you do with this. . .  (Started: Aug. 22 2003, 12:40 ET, Last post: Aug. 22 2003, 22:05 ET)
"Real Man's Gun"
rebarreling a Savage 110FP 308  (Started: Aug. 8 2003, 14:55 ET, Last post: Aug. 18 2003, 00:09 ET)
Refinshing a laminated stock  (Started: Aug. 15 2003, 22:51 ET, Last post: Aug. 16 2003, 01:22 ET)
changing the finish on a Savage laminate
How to remove a Remington 700 barrel  (Started: Jul. 24 2003, 11:55 ET, Last post: Aug. 14 2003, 01:09 ET)
Without the right tools
How can I make Spiral Cuts.......  (Started: Aug. 6 2003, 08:34 ET, Last post: Aug. 13 2003, 23:29 ET)
Head Scracher
AR10 magwell  (Started: Aug. 7 2003, 20:40 ET, Last post: Aug. 12 2003, 22:06 ET)
Milling to use metric FAL mags.
home built firearms and serial numbers  (Started: Aug. 5 2003, 23:26 ET, Last post: Aug. 7 2003, 13:50 ET)
got a 1919 itch  (Started: Aug. 6 2003, 17:30 ET, Last post: Aug. 6 2003, 17:30 ET)
anyone use tapco's kit?
AR-15 Lower, get machine shop to Finish?  (Started: Jul. 11 2003, 12:14 ET, Last post: Jul. 30 2003, 20:37 ET)
Get machine shop to Finished 80% lower
homemade stocks  (Started: Jul. 20 2003, 13:48 ET, Last post: Jul. 20 2003, 23:41 ET)
1919 a4 barrel thread diameter/pitch ?  (Started: Jul. 20 2003, 12:57 ET, Last post: Jul. 20 2003, 13:46 ET)
Is Hardening of 1911 Frame Necessary?  (Started: Jul. 2 2003, 09:12 ET, Last post: Jul. 20 2003, 12:15 ET)
Help in deciding what kind of 80% frame
electric trigger  (Started: Jun. 26 2003, 14:34 ET, Last post: Jul. 3 2003, 14:28 ET)
looking for trigger or plans
MG42-SEMI  (Started: May 19 2003, 22:16 ET, Last post: May 31 2003, 19:34 ET)
MK I to MK II, what's necessary?  (Started: May 13 2003, 10:17 ET, Last post: May 14 2003, 10:08 ET)
Anyone have a print of a MK II receiver?
Novak sights  (Started: May 12 2003, 17:06 ET, Last post: May 12 2003, 19:54 ET)
on a Bulgarian Makarov
Catastrophic M14 failure  (Started: May 6 2003, 22:16 ET, Last post: May 12 2003, 00:20 ET)
New front sight  (Started: Apr. 28 2003, 19:49 ET, Last post: Apr. 30 2003, 21:35 ET)
for a Russian Makarov
.45 UZI  (Started: Apr. 30 2003, 12:30 ET, Last post: Apr. 30 2003, 12:30 ET)
Grease gun mags in an UZI
Interesting Idea  (Started: Apr. 18 2003, 19:41 ET, Last post: Apr. 28 2003, 13:45 ET)
Found this at www.crankyfarmer.com
bluing tank burners  (Started: Apr. 19 2003, 11:48 ET, Last post: Apr. 27 2003, 14:21 ET)
4140 steel  (Started: Apr. 19 2003, 06:41 ET, Last post: Apr. 20 2003, 20:29 ET)
snake skin front strap  (Started: Feb. 4 2003, 17:00 ET, Last post: Apr. 19 2003, 14:53 ET)
Ruger M77 Bolt Question  (Started: Apr. 16 2003, 11:44 ET, Last post: Apr. 16 2003, 11:44 ET)
Ruger MK I Barrel  (Started: Apr. 14 2003, 11:01 ET, Last post: Apr. 14 2003, 11:01 ET)
Now to take it off
Small 870 project  (Started: Mar. 8 2003, 17:27 ET, Last post: Apr. 8 2003, 14:39 ET)
shell stop modifications
Stamping a design  (Started: Mar. 11 2003, 21:07 ET, Last post: Apr. 2 2003, 07:00 ET)
Ever HEARD of the term "cost effective">  (Started: Mar. 21 2003, 10:25 ET, Last post: Apr. 1 2003, 17:52 ET)
sheesh
shotgun receiver castings  (Started: Mar. 28 2003, 09:46 ET, Last post: Mar. 30 2003, 10:33 ET)
ar-180  (Started: Mar. 28 2003, 23:29 ET, Last post: Mar. 28 2003, 23:29 ET)
Blueprints  (Started: Mar. 24 2003, 00:06 ET, Last post: Mar. 26 2003, 08:19 ET)
Bolt blueprints and other parts  (Started: Feb. 16 2003, 06:12 ET, Last post: Mar. 26 2003, 01:06 ET)
Machining parts other than receivers.
How to get rid of "dry-fire dimple"???  (Started: Jan. 28 2003, 20:53 ET, Last post: Mar. 23 2003, 13:13 ET)
Make Your Own Parkerizing Solution  (Started: Feb. 4 2003, 11:53 ET, Last post: Mar. 22 2003, 16:57 ET)
Wanted: 22 revolver plans  (Started: Mar. 12 2003, 16:17 ET, Last post: Mar. 12 2003, 16:17 ET)
22 revolver plans
1919A4 Project  (Started: Jan. 22 2003, 15:15 ET, Last post: Mar. 5 2003, 06:50 ET)
Heat Treating?????
9mm AR upper build  (Started: Feb. 5 2003, 13:39 ET, Last post: Mar. 2 2003, 12:22 ET)
just rambling thoughts
Colt Mustang 380  (Started: Feb. 17 2003, 23:46 ET, Last post: Feb. 18 2003, 20:40 ET)
Trigger Problems
80% Uzi Receiver - SA prints???  (Started: Feb. 17 2003, 13:06 ET, Last post: Feb. 18 2003, 11:16 ET)
New to list..........Photos in my photo album  (Started: Feb. 16 2003, 07:27 ET, Last post: Feb. 16 2003, 07:27 ET)
Home gunsmiths in WPB FL. area.  (Started: Feb. 11 2003, 16:27 ET, Last post: Feb. 13 2003, 15:23 ET)
Setting up shop.
Mods to comply with Aussie gun bans?  (Started: Dec. 11 2002, 01:34 ET, Last post: Feb. 6 2003, 15:06 ET)
CZ, Browning, etc down tube...
Mini 14 takedown problem  (Started: Feb. 1 2003, 14:09 ET, Last post: Feb. 5 2003, 12:19 ET)
stainless Ranch rifle, horrible pressure
Pics of FA and SA Uzi  (Started: Feb. 3 2003, 21:23 ET, Last post: Feb. 4 2003, 09:01 ET)
What happened to the "where to index from"  (Started: Jan. 27 2003, 11:31 ET, Last post: Jan. 28 2003, 21:21 ET)
post on the 0% AR forgings ? Need some
Differences?  (Started: Jan. 7 2003, 14:34 ET, Last post: Jan. 28 2003, 17:15 ET)
Galil vs. AK
had to lighten bolt of 22-AR unit, as well  (Started: Jan. 27 2003, 11:15 ET, Last post: Jan. 27 2003, 11:15 ET)
as shorten the recoil spring a bit.
AR bolt & Carrier  (Started: Jan. 24 2003, 08:22 ET, Last post: Jan. 27 2003, 09:55 ET)
Re anodizing ???  (Started: Jan. 21 2003, 22:06 ET, Last post: Jan. 24 2003, 19:13 ET)
What do you think?
CYLINDER MOD. FOR FULL-MOON CLIPS  (Started: Dec. 19 2002, 04:45 ET, Last post: Jan. 19 2003, 19:00 ET)
HOME SMITHING
Muzzle loader and percussion lock plans  (Started: Jan. 8 2003, 15:33 ET, Last post: Jan. 18 2003, 11:14 ET)
plans
Muzzle brake\rifling  (Started: Jan. 14 2003, 18:01 ET, Last post: Jan. 14 2003, 19:59 ET)
how to check
Full Moon Clips for S&W K frames  (Started: Jan. 7 2003, 18:46 ET, Last post: Jan. 10 2003, 10:53 ET)
A while back  (Started: Jan. 9 2003, 13:18 ET, Last post: Jan. 9 2003, 13:18 ET)
Lightening Recoil with weight.
Venerable M1A Battle rifle  (Started: Jan. 2 2003, 20:23 ET, Last post: Jan. 6 2003, 09:40 ET)
80% Receivers
Anyone ever heard of a 80% desert eagle?  (Started: May 18 2002, 22:33 ET, Last post: Dec. 30 2002, 15:51 ET)
Make an Antique Rifling Machine  (Started: Dec. 22 2002, 07:54 ET, Last post: Dec. 30 2002, 09:28 ET)
Reamers for an 80% KT SIG  (Started: Dec. 27 2002, 12:38 ET, Last post: Dec. 28 2002, 02:34 ET)
Reamers for an 80% KT SIG
Don't know dick  (Started: Nov. 28 2001, 23:47 ET, Last post: Dec. 26 2002, 08:49 ET)
dumb ass question
Anyone from Delaware?  (Started: Dec. 8 2002, 22:49 ET, Last post: Dec. 24 2002, 15:39 ET)
Sources for Parts Sets?  (Started: Dec. 21 2001, 11:49 ET, Last post: Dec. 22 2002, 16:19 ET)
10/22 crazy question  (Started: Sep. 26 2002, 10:46 ET, Last post: Dec. 22 2002, 12:29 ET)
Ed's Red cleaning solution  (Started: Dec. 15 2002, 00:02 ET, Last post: Dec. 20 2002, 15:33 ET)
Is it worth a try ?
Barrel porting  (Started: Nov. 13 2002, 22:28 ET, Last post: Dec. 13 2002, 19:00 ET)
porting an encore barrel
Fitting 1911 firing pin System to a Star  (Started: Nov. 27 2002, 11:11 ET, Last post: Dec. 9 2002, 07:33 ET)
eliminates the proclivity to break pins,
Help.  Anyone know of BHP drawings?  (Started: Dec. 9 2002, 01:18 ET, Last post: Dec. 9 2002, 02:29 ET)
Where can I get prints?
Help I need machinist drawings for Sharps rifle  (Started: Dec. 5 2002, 01:21 ET, Last post: Dec. 8 2002, 18:03 ET)
What can I do with a lathe?  (Started: Nov. 9 2002, 02:16 ET, Last post: Dec. 7 2002, 02:38 ET)
derringer maybe?
1911  (Started: Aug. 15 2002, 18:03 ET, Last post: Dec. 5 2002, 12:43 ET)
How small
Essex arms  (Started: Oct. 21 2002, 14:17 ET, Last post: Dec. 4 2002, 22:03 ET)
ordering info
Choosing Twist Rate?  (Started: Dec. 4 2002, 09:12 ET, Last post: Dec. 4 2002, 14:35 ET)
Weld beavertail on Stars, P35's, PPK's, etc  (Started: Nov. 27 2002, 11:17 ET, Last post: Nov. 27 2002, 20:01 ET)
helps protect the cocked hammer from
AK47 bent metal template  (Started: Nov. 26 2002, 23:20 ET, Last post: Nov. 27 2002, 18:27 ET)
1911  (Started: Nov. 21 2002, 21:19 ET, Last post: Nov. 22 2002, 15:56 ET)
ok, so why 0% and 80% castings and not forgings?  (Started: Nov. 21 2002, 20:40 ET, Last post: Nov. 21 2002, 21:33 ET)
there a reason?
anyone use a home CNC mill for a 0% AR15 lower?  (Started: Nov. 21 2002, 12:17 ET, Last post: Nov. 21 2002, 19:15 ET)
80% receivers and drill press  (Started: Aug. 26 2002, 10:53 ET, Last post: Nov. 20 2002, 17:56 ET)
High Standard  (Started: Nov. 18 2002, 21:04 ET, Last post: Nov. 20 2002, 02:29 ET)
Alum grip frame for 22/45?  (Started: Nov. 17 2002, 23:55 ET, Last post: Nov. 17 2002, 23:55 ET)
new bbl for 629  (Started: Nov. 17 2002, 18:10 ET, Last post: Nov. 17 2002, 18:10 ET)
install question
AK-47 receiver  (Started: Nov. 3 2002, 23:22 ET, Last post: Nov. 16 2002, 23:10 ET)
Look at the site I have found
Ruger MkI or MKII kits?  (Started: Oct. 31 2002, 01:20 ET, Last post: Nov. 13 2002, 20:59 ET)
What would you need?
Blue Wonder Gun Cleaner  (Started: Oct. 22 2002, 16:19 ET, Last post: Nov. 13 2002, 02:09 ET)
Just had ta ask...
S&W 659  (Started: Nov. 4 2002, 22:36 ET, Last post: Nov. 9 2002, 19:18 ET)
Accuracy problems
Any TFL'ers in the Tucson Area?  (Started: Nov. 9 2002, 13:59 ET, Last post: Nov. 9 2002, 13:59 ET)
Man did I find the place for tools!!!
ATTN: I am not from ATF!  (Started: Nov. 4 2002, 12:11 ET, Last post: Nov. 7 2002, 22:08 ET)
What's wrong with you people?
Rifle Reworking Questions.  (Started: Nov. 6 2002, 01:16 ET, Last post: Nov. 7 2002, 00:15 ET)
Bill Holmes new .50 cal book review  (Started: Nov. 2 2002, 20:02 ET, Last post: Nov. 4 2002, 23:52 ET)
drilling jig  (Started: Oct. 25 2002, 14:31 ET, Last post: Oct. 25 2002, 21:17 ET)
want to rent for 80% forging
M1A/M14  (Started: Oct. 23 2002, 12:21 ET, Last post: Oct. 23 2002, 16:19 ET)
Bedding
Precision AR lower  (Started: Oct. 16 2002, 13:43 ET, Last post: Oct. 17 2002, 15:21 ET)
Reaming holes
NEW INFO SITE  (Started: Oct. 14 2002, 22:00 ET, Last post: Oct. 17 2002, 03:17 ET)
BUILDERS SITW
80% price very high almost too much  (Started: Sep. 20 2002, 09:39 ET, Last post: Oct. 15 2002, 18:31 ET)
what is happening
wood stock repair what to fill with  (Started: Sep. 23 2002, 20:01 ET, Last post: Oct. 15 2002, 17:04 ET)
Help, I need somebody, Help I need somebody  (Started: Oct. 3 2002, 11:56 ET, Last post: Oct. 14 2002, 20:45 ET)
NOT just anybody... EEA Witness Trigger
Ruger 10/22  (Started: Oct. 13 2002, 15:30 ET, Last post: Oct. 13 2002, 17:20 ET)
bedding pix
trigger job ona  ruger  (Started: Oct. 12 2002, 23:30 ET, Last post: Oct. 13 2002, 10:37 ET)
Technique?: Rebarreling Mauser-type  (Started: Sep. 18 2002, 05:53 ET, Last post: Sep. 25 2002, 22:41 ET)
American Pistolsmith Guild checklist.  (Started: Sep. 25 2002, 22:03 ET, Last post: Sep. 25 2002, 22:03 ET)
color caseing ?????  (Started: Sep. 21 2002, 01:44 ET, Last post: Sep. 23 2002, 15:58 ET)
can it be done at home
Homemade post Parkerizing water displacing solutio  (Started: Sep. 21 2002, 14:19 ET, Last post: Sep. 23 2002, 15:11 ET)
zinc park preparation  (Started: Sep. 22 2002, 12:38 ET, Last post: Sep. 22 2002, 21:07 ET)
what grit minimum for adhesion??
rust browning a barrel  (Started: Sep. 9 2002, 17:53 ET, Last post: Sep. 20 2002, 23:35 ET)
struggling through it right now
Lapping a slide  (Started: Sep. 16 2002, 14:44 ET, Last post: Sep. 20 2002, 09:29 ET)
DEHORNING SLIDE  (Started: Sep. 18 2002, 01:55 ET, Last post: Sep. 18 2002, 18:36 ET)
Sig 229 on a KT 228 frame  (Started: Sep. 3 2002, 15:05 ET, Last post: Sep. 16 2002, 22:26 ET)
Is that possible?
when to parkerize my 1911 frame?  (Started: Sep. 4 2002, 20:53 ET, Last post: Sep. 14 2002, 18:04 ET)
?
Finish for KT P228  (Started: Sep. 12 2002, 15:58 ET, Last post: Sep. 13 2002, 12:34 ET)
Norrell Moly Resin
Best steels to use for gun parts?  (Started: Sep. 10 2002, 22:34 ET, Last post: Sep. 11 2002, 19:23 ET)
coatings kalgard  (Started: Sep. 10 2002, 17:46 ET, Last post: Sep. 10 2002, 20:59 ET)
Polishing techniques  (Started: Aug. 27 2002, 09:57 ET, Last post: Sep. 10 2002, 01:26 ET)
Your techniqes and anecdotes
glock aftermarket bbl  (Started: Sep. 5 2002, 14:00 ET, Last post: Sep. 9 2002, 12:39 ET)
want to thread
Hello Everyone, I'm just starting out  (Started: Sep. 9 2002, 02:06 ET, Last post: Sep. 9 2002, 03:53 ET)
Hot bluing  (Started: Aug. 21 2002, 21:08 ET, Last post: Sep. 8 2002, 20:43 ET)
Looking for a how-to on it
timing the threads?  (Started: Sep. 8 2002, 08:59 ET, Last post: Sep. 8 2002, 19:03 ET)
fal
Building for others  (Started: Aug. 28 2002, 09:57 ET, Last post: Sep. 3 2002, 19:15 ET)
Legal question
Bluing  (Started: Sep. 2 2002, 23:35 ET, Last post: Sep. 3 2002, 12:04 ET)
Hey MournSword
1911 frame problems  (Started: Aug. 27 2002, 22:34 ET, Last post: Aug. 28 2002, 09:31 ET)
Barrel fit
Blue wonder gun blue  (Started: Jul. 30 2002, 09:39 ET, Last post: Aug. 23 2002, 20:04 ET)
Some pics
1st 1911 build  (Started: Aug. 19 2002, 23:24 ET, Last post: Aug. 21 2002, 14:07 ET)
Bolt lug lapping  (Started: Aug. 19 2002, 01:13 ET, Last post: Aug. 19 2002, 13:35 ET)
Gunsmithing school  (Started: Jul. 16 2002, 21:14 ET, Last post: Aug. 18 2002, 13:14 ET)
Thinkin about goin
Rotary tools  (Started: Aug. 17 2002, 19:11 ET, Last post: Aug. 18 2002, 13:02 ET)
I'm finally going to be educated!  (Started: Aug. 15 2002, 23:50 ET, Last post: Aug. 16 2002, 19:08 ET)
Ordered a book and video
Who is goign to bbq  (Started: Aug. 10 2002, 00:23 ET, Last post: Aug. 15 2002, 08:43 ET)
Please tell me
Charcoal bluing  (Started: Aug. 5 2002, 00:21 ET, Last post: Aug. 14 2002, 00:42 ET)
Would it be feasible?
Any bbq goer bringing a ar15 jig  (Started: Aug. 12 2002, 22:31 ET, Last post: Aug. 13 2002, 08:08 ET)
Sarco project hi power  (Started: Jul. 31 2002, 16:07 ET, Last post: Aug. 3 2002, 13:32 ET)
Are these really worth the effort?
Parkerizing removal  (Started: Jul. 28 2002, 22:41 ET, Last post: Aug. 2 2002, 11:09 ET)
How to smooth out a 1911's slide to frame action?  (Started: Jul. 26 2002, 23:50 ET, Last post: Jul. 27 2002, 08:59 ET)
Slide is not as smooth as it should be..
Barrel rifling  (Started: Jul. 22 2002, 10:59 ET, Last post: Jul. 27 2002, 02:45 ET)
How to
1919-1022  (Started: Jul. 18 2002, 13:01 ET, Last post: Jul. 22 2002, 22:38 ET)
As seen sar
Ot: home built battle rifle shoot  (Started: Jul. 22 2002, 12:52 ET, Last post: Jul. 22 2002, 12:52 ET)
Ga falers get-together and outreach
Looking for blueprints for vz-61 and vz-58  (Started: Jul. 10 2002, 17:10 ET, Last post: Jul. 21 2002, 10:07 ET)
Delta elite complete  (Started: Jul. 20 2002, 16:05 ET, Last post: Jul. 20 2002, 21:43 ET)
It's a beauty
Have you tried blue wonder?  (Started: Jul. 19 2002, 15:48 ET, Last post: Jul. 19 2002, 16:24 ET)
Rifle bolt jeweling  (Started: Jul. 17 2002, 05:10 ET, Last post: Jul. 17 2002, 13:49 ET)
Or, fun cheap upgrades to your mauser
Interesting muzzle brake design site  (Started: Jul. 16 2002, 13:35 ET, Last post: Jul. 16 2002, 13:35 ET)
But it's in deustch...
Another recipe for parkerizing  (Started: Jul. 8 2002, 15:32 ET, Last post: Jul. 16 2002, 08:11 ET)
Zinc-phosphate
1919a4  (Started: Jul. 9 2002, 18:41 ET, Last post: Jul. 13 2002, 09:08 ET)
Buildin one
The 80% frames  (Started: Jul. 10 2002, 00:35 ET, Last post: Jul. 13 2002, 04:41 ET)
Location of these items
80% shotguns  (Started: Jul. 9 2002, 01:58 ET, Last post: Jul. 10 2002, 17:28 ET)
Manganese dioxide  (Started: Jun. 19 2002, 23:43 ET, Last post: Jul. 9 2002, 17:58 ET)
Parkerizing
Furniture sale!!  (Started: Jul. 2 2002, 01:05 ET, Last post: Jul. 8 2002, 21:24 ET)
Link to custom rifle stocks
Removing plating  (Started: Jun. 26 2002, 00:16 ET, Last post: Jul. 8 2002, 12:53 ET)
Anyone buy a sig frame yet?  (Started: Jun. 1 2002, 08:24 ET, Last post: Jul. 7 2002, 21:40 ET)
Any kristy tool frame owners out there?
Did some parkerizing tonight...  (Started: May 20 2002, 21:35 ET, Last post: Jul. 5 2002, 15:19 ET)
It went pretty well!
Need recomondations for a first project  (Started: Jun. 20 2002, 13:23 ET, Last post: Jun. 21 2002, 21:46 ET)
Maybe some new rules  (Started: May 28 2002, 23:09 ET, Last post: Jun. 19 2002, 13:35 ET)
Maybe not
What other 80% recievers or frames ?  (Started: May 29 2002, 05:37 ET, Last post: Jun. 14 2002, 16:42 ET)
Besides ar-15,1911,or 228
Other castings  (Started: Jun. 11 2002, 23:08 ET, Last post: Jun. 14 2002, 03:07 ET)
Looking for other castings
Home norinco 1911 project...  (Started: Jun. 10 2002, 16:34 ET, Last post: Jun. 13 2002, 15:51 ET)
Stinger pen gun clone?  (Started: Jun. 11 2002, 07:01 ET, Last post: Jun. 12 2002, 09:30 ET)
A high-quality last-ditch weapon
Homemade 22 pistol  (Started: May 21 2002, 04:57 ET, Last post: Jun. 11 2002, 01:43 ET)
Darn cheap design!
How much did it cost in the end??  (Started: May 4 2002, 18:20 ET, Last post: Jun. 5 2002, 18:45 ET)
Help  teflon  finish info  (Started: May 17 2002, 20:46 ET, Last post: May 31 2002, 14:13 ET)
Need info
Heres one for ya...  (Started: May 27 2002, 00:35 ET, Last post: May 30 2002, 00:32 ET)
How about 50% ar's?
Potential new source for 50-80% fal recievers  (Started: May 27 2002, 11:12 ET, Last post: May 28 2002, 16:22 ET)
Dan coonan cast receiver blanks
Plating/anodizing  (Started: May 23 2002, 17:08 ET, Last post: May 27 2002, 09:18 ET)
Anyone got plans for a power supply?
Need help/info  (Started: May 24 2002, 19:59 ET, Last post: May 26 2002, 11:01 ET)
Refinish vs buying new frame
Gunsmiths that accepts 80%'s  (Started: May 24 2002, 23:46 ET, Last post: May 26 2002, 10:25 ET)
Safety & trigger  (Started: May 4 2002, 21:41 ET, Last post: May 21 2002, 22:44 ET)
Question about kristi tool sig frame  (Started: May 19 2002, 03:39 ET, Last post: May 19 2002, 03:39 ET)
Can you make a slide jig?  (Started: Apr. 8 2002, 17:58 ET, Last post: May 16 2002, 22:25 ET)
Anyone doing any hot blueing soon  (Started: May 12 2002, 23:14 ET, Last post: May 14 2002, 08:31 ET)
Hot blueing
Delta elite progress  (Started: Apr. 30 2002, 21:41 ET, Last post: May 13 2002, 07:15 ET)
Getting there
She's done!!!  (Started: May 7 2002, 16:51 ET, Last post: May 9 2002, 23:48 ET)
Finished with project
Milled ak?  (Started: Apr. 4 2002, 21:58 ET, Last post: May 9 2002, 11:40 ET)
Toaster oven and bake-on coatings  (Started: Apr. 28 2002, 22:11 ET, Last post: May 2 2002, 08:09 ET)
Jbweld wont anodize
New guy!!! and im building something!!!  (Started: Apr. 29 2002, 23:32 ET, Last post: Apr. 30 2002, 13:40 ET)
Its a 9mm ak
Getting started  (Started: Apr. 28 2002, 17:50 ET, Last post: Apr. 29 2002, 11:25 ET)
Aluminum forging vs. casting  (Started: Mar. 25 2002, 04:36 ET, Last post: Apr. 24 2002, 15:23 ET)
Difference in strength?
Making muzzle brakes...  (Started: Apr. 21 2002, 19:43 ET, Last post: Apr. 21 2002, 23:41 ET)
Ar-10 forgings?  (Started: Apr. 18 2002, 09:25 ET, Last post: Apr. 19 2002, 21:39 ET)
How do i fix loose slide rails?  (Started: Apr. 16 2002, 12:18 ET, Last post: Apr. 19 2002, 21:33 ET)
Essex frames  (Started: Apr. 3 2002, 01:02 ET, Last post: Apr. 18 2002, 17:18 ET)
Problem with moly/teflon finish  (Started: Mar. 26 2002, 18:47 ET, Last post: Apr. 16 2002, 22:03 ET)
Gotta start over
Brazilian slides  (Started: Apr. 11 2002, 20:22 ET, Last post: Apr. 16 2002, 21:42 ET)
Get what you pay for?
Finishing my 1911 casting  (Started: Apr. 15 2002, 20:09 ET, Last post: Apr. 15 2002, 21:48 ET)
Building an 80% casting ( look !)  (Started: Apr. 12 2002, 00:56 ET, Last post: Apr. 14 2002, 00:06 ET)
New web site ( please visit) good info
80% fal's?  (Started: Apr. 13 2002, 10:08 ET, Last post: Apr. 13 2002, 22:24 ET)
1911 & rails  (Started: Apr. 12 2002, 20:52 ET, Last post: Apr. 12 2002, 22:00 ET)
80% frame  (Started: Apr. 4 2002, 15:26 ET, Last post: Apr. 12 2002, 11:11 ET)
Something new?  (Started: Apr. 12 2002, 02:12 ET, Last post: Apr. 12 2002, 02:12 ET)
Something new?
Muzzle stuff  (Started: Apr. 6 2002, 23:35 ET, Last post: Apr. 7 2002, 02:11 ET)
Plans for 1911 grip  (Started: Mar. 28 2002, 23:46 ET, Last post: Apr. 4 2002, 16:46 ET)
80% questions  (Started: Mar. 31 2002, 11:28 ET, Last post: Apr. 3 2002, 07:07 ET)
Is heat treating necessary
Using dremel for cutting 1911 slide rails  (Started: Mar. 27 2002, 02:56 ET, Last post: Apr. 2 2002, 09:23 ET)
Low-cost gunsmithing
Cant get firing pin in  (Started: Mar. 27 2002, 23:00 ET, Last post: Mar. 31 2002, 00:35 ET)
I've died and gone to heaven...  (Started: Mar. 28 2002, 18:36 ET, Last post: Mar. 28 2002, 23:43 ET)
This is a fantastic site!
Sig P228 80%  (Started: Nov. 24 2001, 11:21 ET, Last post: Mar. 28 2002, 19:41 ET)
Becoming available
Best method for cleanup post sandblasting  (Started: Mar. 20 2002, 09:51 ET, Last post: Mar. 26 2002, 18:58 ET)
How do I get all the grit off of the frame and parts?
Stainless vs "normal" steel?  (Started: Mar. 19 2002, 11:17 ET, Last post: Mar. 25 2002, 22:07 ET)
End mill use question
Pics 3  (Started: Mar. 25 2002, 17:52 ET, Last post: Mar. 25 2002, 19:42 ET)
Last one
Pics 2  (Started: Mar. 25 2002, 17:51 ET, Last post: Mar. 25 2002, 17:51 ET)
Here
Pics  (Started: Mar. 25 2002, 17:50 ET, Last post: Mar. 25 2002, 17:50 ET)
Hope this works!
My 1911 work-in-progress pics 1  (Started: Mar. 25 2002, 17:47 ET, Last post: Mar. 25 2002, 17:49 ET)
Some snapshots
1911 ftf on the last round  (Started: Mar. 24 2002, 17:19 ET, Last post: Mar. 25 2002, 09:49 ET)
80% 1911
1911 Plans Review  (Started: Mar. 17 2002, 02:04 ET, Last post: Mar. 21 2002, 23:38 ET)
Kudos to Dare Gun Room
Nagging doubt over 80% legality is gone  (Started: Mar. 8 2002, 07:41 ET, Last post: Mar. 21 2002, 15:35 ET)
§179.62 does not apply!
Removing bluing  (Started: Mar. 13 2002, 11:27 ET, Last post: Mar. 19 2002, 10:09 ET)
Acid bath or blast?
Plunger Tube Advice Needed  (Started: Feb. 2 2002, 09:31 ET, Last post: Mar. 17 2002, 01:27 ET)
Please Make Up My Mind
Barrel Movement  (Started: Mar. 14 2002, 22:03 ET, Last post: Mar. 15 2002, 23:28 ET)
Kuhnhausen's Books  (Started: Jan. 5 2002, 03:47 ET, Last post: Mar. 11 2002, 18:45 ET)
What's the best/cheapest place to get them?
Question for PvtRyan or others...  (Started: Feb. 26 2002, 00:13 ET, Last post: Mar. 9 2002, 20:43 ET)
frontstrap checkering jig
I dehorned!!!  (Started: Feb. 25 2002, 23:08 ET, Last post: Mar. 6 2002, 15:52 ET)
After dinner project
bare metal  (Started: Mar. 2 2002, 22:29 ET, Last post: Mar. 4 2002, 00:02 ET)
New source for castings??  (Started: Mar. 1 2002, 00:18 ET, Last post: Mar. 3 2002, 10:35 ET)
  I think I found one!!!!
1911 Parts Kits  (Started: Feb. 28 2002, 12:06 ET, Last post: Mar. 2 2002, 20:55 ET)
Help! Where  should I buy?
FINALLY filed frame for beavertail!!  (Started: Feb. 20 2002, 19:05 ET, Last post: Mar. 2 2002, 01:32 ET)
What an adventure!!!
1911 Newbie Question:  (Started: Feb. 21 2002, 04:59 ET, Last post: Mar. 1 2002, 09:09 ET)
What's the trick here?
stoning pits out or frame  (Started: Feb. 27 2002, 22:44 ET, Last post: Feb. 27 2002, 22:44 ET)
Stainless touch up??  (Started: Feb. 15 2002, 10:00 ET, Last post: Feb. 25 2002, 23:23 ET)
Beadblast or ???
Bead blasting...  (Started: Feb. 18 2002, 22:35 ET, Last post: Feb. 25 2002, 16:49 ET)
When should I do it and questions
Webley blueprints/plans?  (Started: Feb. 23 2002, 01:38 ET, Last post: Feb. 24 2002, 13:33 ET)
Can you help?
Find of the week  (Started: Feb. 19 2002, 17:58 ET, Last post: Feb. 20 2002, 22:14 ET)
another adventure in parts scrounginh
Barrel Quality Determination  (Started: Feb. 18 2002, 21:25 ET, Last post: Feb. 18 2002, 22:46 ET)
80% casting ??  (Started: Feb. 17 2002, 03:40 ET, Last post: Feb. 18 2002, 15:39 ET)
Need help removing factory ejector  (Started: Feb. 16 2002, 19:20 ET, Last post: Feb. 17 2002, 12:20 ET)
How?
Trigger Install and Trigger Job  (Started: Feb. 16 2002, 22:11 ET, Last post: Feb. 16 2002, 22:11 ET)
I couldn't have done it without you...
Rear Sight Modificatioin  (Started: Feb. 15 2002, 10:09 ET, Last post: Feb. 15 2002, 23:10 ET)
Pyramid Ghost sillouet
Norinco Range Trip - Results  (Started: Jan. 20 2002, 20:24 ET, Last post: Feb. 13 2002, 19:43 ET)
Everything is going great and then .....
Beavertail Safety Grip  (Started: Feb. 11 2002, 07:20 ET, Last post: Feb. 12 2002, 07:39 ET)
Just starting...need some advice  (Started: Feb. 6 2002, 16:15 ET, Last post: Feb. 10 2002, 14:42 ET)
fitting parts
It goes bang!  (Started: Feb. 4 2002, 12:02 ET, Last post: Feb. 9 2002, 23:35 ET)
Whoopie!
Just found this great forum,  question  (Started: Feb. 8 2002, 09:30 ET, Last post: Feb. 8 2002, 10:07 ET)
Colt Compact carry project
Pre-fit/drop-in barrel question  (Started: Jan. 11 2002, 22:38 ET, Last post: Feb. 2 2002, 11:20 ET)
which one?
More On Barrel Fit  (Started: Jan. 13 2002, 12:49 ET, Last post: Feb. 2 2002, 11:17 ET)
Polishing By Hand  (Started: Jan. 31 2002, 17:33 ET, Last post: Feb. 2 2002, 08:59 ET)
Strange Slide/Barrel problem  (Started: Jan. 25 2002, 17:14 ET, Last post: Jan. 31 2002, 20:34 ET)
I think its the hood rubbing on the slide
When it absolutely, positively has to go in  (Started: Jan. 29 2002, 10:39 ET, Last post: Jan. 30 2002, 22:41 ET)
Stripped grip bushing suck ***, easy solution
Pop Quiz...Take your best shot  (Started: Jan. 29 2002, 23:01 ET, Last post: Jan. 30 2002, 20:54 ET)
What's missing causing this????
Hi every one  (Started: Jan. 29 2002, 14:30 ET, Last post: Jan. 29 2002, 21:14 ET)
Hello--and a refinishing question  (Started: Jan. 28 2002, 21:15 ET, Last post: Jan. 29 2002, 19:22 ET)
Stock Refinishing
Ejector Oops and thumb safety/plunger interaction  (Started: Jan. 27 2002, 08:03 ET, Last post: Jan. 27 2002, 21:50 ET)
I dunno if this is gonna be an easy fix or not....
STI hammer,sear & mainspring  (Started: Jan. 11 2002, 23:59 ET, Last post: Jan. 25 2002, 17:12 ET)
anybody used STI parts
Ed Brown's Book  (Started: Jan. 11 2002, 15:40 ET, Last post: Jan. 22 2002, 16:00 ET)
Brownells Discount?  (Started: Jan. 18 2002, 21:41 ET, Last post: Jan. 22 2002, 14:28 ET)
Plans, Blueprints, Autocad files?  (Started: Jan. 20 2002, 04:29 ET, Last post: Jan. 21 2002, 01:09 ET)
Sources, sharing, etc.
When is Barrel Fitting Correct?  (Started: Jan. 19 2002, 19:28 ET, Last post: Jan. 20 2002, 12:14 ET)
How to tell!
Bead  Blasting  (Started: Jan. 13 2002, 23:07 ET, Last post: Jan. 14 2002, 22:11 ET)
hole change
80% 1911A1: Where to Start  (Started: Jan. 5 2002, 01:37 ET, Last post: Jan. 6 2002, 13:56 ET)
Guidance desperately needed
Sources for 80%, 40%, 0% frames?  (Started: Jan. 6 2002, 00:31 ET, Last post: Jan. 6 2002, 08:53 ET)
Besides TanneryShop, I mean...
Newbie greetings, etc.  (Started: Jan. 5 2002, 00:31 ET, Last post: Jan. 5 2002, 11:41 ET)
fair warning from an enthusiastic newcomer
Kuhnhausen Books  (Started: Dec. 28 2001, 16:22 ET, Last post: Dec. 30 2001, 12:15 ET)
Oxpho Blue on The Sistema?  (Started: Dec. 8 2001, 22:33 ET, Last post: Dec. 28 2001, 11:57 ET)
springfield hink  (Started: Dec. 20 2001, 22:51 ET, Last post: Dec. 28 2001, 02:00 ET)
im not sure if that is really a word
First Project Pocs- Sooo close to finished  (Started: Dec. 25 2001, 02:53 ET, Last post: Dec. 27 2001, 22:20 ET)
Slide/Frame Fit  (Started: Dec. 13 2001, 21:31 ET, Last post: Dec. 20 2001, 18:29 ET)
Trigger jobs  (Started: Dec. 20 2001, 15:24 ET, Last post: Dec. 20 2001, 17:56 ET)
Yup, you CAN over do it...
Hi there!    (Started: Dec. 19 2001, 13:37 ET, Last post: Dec. 20 2001, 12:06 ET)
Have some questions / opinions requested
Barrel Timing Test  (Started: Dec. 19 2001, 12:12 ET, Last post: Dec. 19 2001, 23:39 ET)
Found at http://www.schuemann.com/
need help fitting bushing  (Started: Oct. 11 2001, 20:48 ET, Last post: Dec. 14 2001, 13:25 ET)
( i really need a lathe)
Slide question  (Started: Dec. 13 2001, 20:15 ET, Last post: Dec. 14 2001, 03:56 ET)
Need Help  (Started: Dec. 12 2001, 00:37 ET, Last post: Dec. 13 2001, 19:16 ET)
I hate decisions
bugs in fixture  (Started: Dec. 2 2001, 11:30 ET, Last post: Dec. 11 2001, 20:27 ET)
Adventures in Parts Scrounging  (Started: Oct. 28 2001, 21:38 ET, Last post: Dec. 11 2001, 19:29 ET)
Joe's Retro Gun
Undercutting trigger guard  (Started: Nov. 27 2001, 08:04 ET, Last post: Dec. 9 2001, 07:08 ET)
Trigger jobs  (Started: Sep. 30 2001, 22:57 ET, Last post: Dec. 3 2001, 10:40 ET)
wow is this long
Tannery Shop Frame Update  (Started: Nov. 1 2001, 19:31 ET, Last post: Nov. 24 2001, 04:54 ET)
Hmmmm
Tony & The Quarter......  (Started: Nov. 15 2001, 10:44 ET, Last post: Nov. 15 2001, 23:58 ET)
Meeting /w Mike 357  (Started: Nov. 12 2001, 23:12 ET, Last post: Nov. 14 2001, 23:31 ET)
.45 gun parts.com  (Started: Oct. 26 2001, 01:18 ET, Last post: Nov. 5 2001, 16:38 ET)
ca ca
Dare Gun Room  (Started: Oct. 20 2001, 00:51 ET, Last post: Oct. 26 2001, 01:15 ET)
parts
officers recoil system  (Started: Oct. 9 2001, 11:47 ET, Last post: Oct. 12 2001, 14:53 ET)
newbie questions? where do I post?
Barrel Lockup Problem  (Started: Sep. 19 2001, 08:37 ET, Last post: Oct. 10 2001, 21:53 ET)
tannery frames  (Started: Oct. 9 2001, 14:46 ET, Last post: Oct. 9 2001, 16:36 ET)
thoughts on carbide  (Started: Oct. 8 2001, 02:00 ET, Last post: Oct. 8 2001, 10:01 ET)
watch out ,ive been thinking
Ejector Replacement?  (Started: Oct. 4 2001, 06:34 ET, Last post: Oct. 8 2001, 09:59 ET)
What's Up With That?
"reading" a drill  (Started: Oct. 8 2001, 02:08 ET, Last post: Oct. 8 2001, 02:08 ET)
when you've read evertyhing else
A new twist to recoil springs  (Started: Oct. 3 2001, 22:24 ET, Last post: Oct. 3 2001, 22:24 ET)
Started Mine Last Nite  (Started: Aug. 30 2001, 18:39 ET, Last post: Oct. 1 2001, 14:28 ET)
Hammer hook info  (Started: Sep. 16 2001, 23:40 ET, Last post: Sep. 17 2001, 21:27 ET)
Recoil Springs  (Started: Sep. 13 2001, 21:17 ET, Last post: Sep. 14 2001, 06:24 ET)
for those new to the 1911(ok,I'm bored)
ocie,where are you?  (Started: Sep. 12 2001, 00:10 ET, Last post: Sep. 13 2001, 14:53 ET)
Good Site  (Started: Aug. 30 2001, 01:00 ET, Last post: Sep. 10 2001, 19:32 ET)
Which to Use as Base for Custom Gun?  (Started: Jul. 19 2001, 17:53 ET, Last post: Sep. 5 2001, 01:26 ET)
Pic on home page  (Started: Jul. 19 2001, 23:49 ET, Last post: Jul. 20 2001, 11:23 ET)