www.HomeGunsmith.com Archive
Archive Date: Apr. 13 2021, 04:00 ET
This is an archive! Click here to go to the live site.

Home > Building The Perfect Piece at Home > AR-15 Specific Home Smithing
The making of my 6.5 grendel ar15  (Started: Sep. 21 2017, 12:06 ET, Last post: Feb. 25 2019, 07:53 ET)
Seeking kind folks that have questions
Gas operated pistol caliber questions  (Started: Oct. 12 2017, 20:17 ET, Last post: Dec. 16 2018, 09:46 ET)
Polymer 80 milling in a drill press  (Started: Jul. 2 2017, 22:30 ET, Last post: Jun. 2 2018, 08:42 ET)
Fixing boo boos  (Started: Feb. 12 2018, 03:07 ET, Last post: Mar. 6 2018, 21:09 ET)
Hole reposition and bushing and more.
Repairing mistakes...  (Started: May 8 2017, 09:46 ET, Last post: Feb. 12 2018, 03:49 ET)
Messed an 80%
Considering a 0% 9mm build  (Started: May 19 2017, 03:33 ET, Last post: Jan. 24 2018, 00:51 ET)
Thoughts and comments welcome
What stock in ny?  (Started: Dec. 29 2017, 08:57 ET, Last post: Dec. 29 2017, 08:57 ET)
Lightweight bolt carrier  (Started: Jul. 21 2017, 17:48 ET, Last post: Jul. 23 2017, 16:20 ET)
Huh?
Ar pistol caliber barrels  (Started: Aug. 5 2009, 23:15 ET, Last post: May 8 2017, 10:01 ET)
What pistol calibers interest you?
Poop!  9mm barrel blanks?  (Started: Dec. 15 2016, 17:49 ET, Last post: Feb. 3 2017, 14:27 ET)
What happened to green mountain???
.308 lower  (Started: Dec. 30 2014, 13:27 ET, Last post: Sep. 23 2016, 17:25 ET)
The problems of europe  (Started: Mar. 11 2016, 14:42 ET, Last post: Jul. 25 2016, 16:05 ET)
Need suppliers located in europe
Building the .300-221 ("300 whisper") upper  (Started: Apr. 27 2008, 21:29 ET, Last post: Apr. 24 2016, 13:57 ET)
Chambering, contouring, and parkerizing
Lwrc repr question  (Started: Mar. 30 2016, 23:19 ET, Last post: Apr. 1 2016, 19:18 ET)
Lwrc repr question
Barrel threading  (Started: Feb. 23 2016, 20:52 ET, Last post: Feb. 28 2016, 23:57 ET)
Threading an ar 15 barrel
Instruction's for 80% lower  (Started: Oct. 10 2015, 21:24 ET, Last post: Nov. 1 2015, 10:33 ET)
Ar printed lower  (Started: Aug. 30 2014, 20:39 ET, Last post: Sep. 9 2015, 15:40 ET)
Side charging handle for straight pull  (Started: Jul. 28 2015, 22:00 ET, Last post: Sep. 4 2015, 10:17 ET)
New project in the works
80 % lower  (Started: Nov. 27 2013, 07:00 ET, Last post: Jul. 9 2015, 12:53 ET)
Polymer or not?
Diy suppliers list (formerly: 80% supplier list)  (Started: Nov. 24 2012, 12:26 ET, Last post: Jul. 2 2015, 13:48 ET)
Diy suppliers list 2012-11-24.pdf
Ar 15  bolt gap  (Started: Apr. 8 2015, 18:39 ET, Last post: Apr. 9 2015, 08:14 ET)
Ar 15 bolt gap
80% jigs  (Started: Feb. 6 2015, 14:36 ET, Last post: Feb. 16 2015, 07:39 ET)
Dpms lr-308 lower  (Started: Apr. 14 2014, 15:36 ET, Last post: Dec. 16 2014, 21:16 ET)
Ar pistol  (Started: Nov. 2 2014, 08:34 ET, Last post: Nov. 13 2014, 00:10 ET)
Cutting down an ar barrel
Brass  (Started: Sep. 22 2014, 12:38 ET, Last post: Sep. 22 2014, 23:10 ET)
Dented brass
Drill jig fyi  (Started: Aug. 2 2014, 11:09 ET, Last post: Aug. 27 2014, 00:04 ET)
Pistol caliber barrles - pick your style(see below  (Started: Aug. 5 2009, 23:22 ET, Last post: May 7 2014, 19:15 ET)
What style of barrel do you prefer? see
Repairing triangular hand guards  (Started: Apr. 23 2014, 10:23 ET, Last post: Apr. 26 2014, 16:13 ET)
Restoring 70"s m16 style handguards
Ar-15  (Started: Apr. 13 2014, 14:29 ET, Last post: Apr. 16 2014, 13:19 ET)
Hammer/trigger
Started a manual machining billet lower today  (Started: Jun. 9 2013, 08:14 ET, Last post: Mar. 17 2014, 22:04 ET)
Free float quad rail dimensions  (Started: Mar. 1 2014, 19:07 ET, Last post: Mar. 2 2014, 10:14 ET)
Ar15 build  (Started: Sep. 18 2013, 21:44 ET, Last post: Feb. 22 2014, 14:13 ET)
How many times can sulfuric acid be use to anodize  (Started: Oct. 25 2013, 07:30 ET, Last post: Feb. 16 2014, 00:01 ET)
Ar-15 mall ninja tactical zombie destroyer  (Started: Feb. 9 2014, 21:40 ET, Last post: Feb. 11 2014, 18:25 ET)
$25 ar-15 80% lower kit laser cut steel  (Started: Sep. 8 2013, 22:31 ET, Last post: Jan. 17 2014, 14:20 ET)
Cerakote vs anodize 11  (Started: Sep. 21 2013, 08:21 ET, Last post: Jan. 6 2014, 18:45 ET)
Finish choices
Ar-15  (Started: Nov. 5 2013, 15:20 ET, Last post: Nov. 8 2013, 19:58 ET)
Function test failure
Need to check headspace before test fire-ar?  (Started: Oct. 31 2013, 06:56 ET, Last post: Nov. 2 2013, 13:39 ET)
Ar-15 and m16 related  (Started: Sep. 10 2013, 20:55 ET, Last post: Sep. 11 2013, 12:20 ET)
Tolerance of 1" hole in upper  (Started: Jul. 2 2013, 21:24 ET, Last post: Aug. 21 2013, 09:43 ET)
Can a "stock" ar15 bolt carrier ass be chromed?  (Started: Jun. 29 2013, 18:40 ET, Last post: Jul. 1 2013, 13:21 ET)
G code  (Started: Jun. 25 2013, 21:14 ET, Last post: Jun. 26 2013, 08:07 ET)
Ar-45 drawings?  (Started: Jun. 25 2013, 11:07 ET, Last post: Jun. 26 2013, 08:03 ET)
Are they availiable anywhere?
Tactical machining 80% ar-15 lower  (Started: Jan. 31 2013, 19:18 ET, Last post: May 17 2013, 15:02 ET)
Noob questions
Rockethub projects too good to be true?  (Started: May 7 2013, 14:32 ET, Last post: May 10 2013, 11:12 ET)
$25 to 35$ per 80% lower. impossible?
Would it be safe?  (Started: May 3 2013, 18:06 ET, Last post: May 5 2013, 15:33 ET)
Home made bolt and carrier?
Turning a rifle buffer  (Started: Apr. 14 2013, 22:20 ET, Last post: May 3 2013, 10:42 ET)
Ar-15/m16 hammers  (Started: Mar. 17 2013, 22:10 ET, Last post: Apr. 27 2013, 01:35 ET)
Question/request
Fealty arms "kickstarter"  (Started: Mar. 28 2013, 01:36 ET, Last post: Mar. 28 2013, 01:36 ET)
80% lowers, kickstarter style
Make your own 80% jig prints/plans  (Started: Mar. 10 2013, 22:19 ET, Last post: Mar. 14 2013, 00:38 ET)
Please share drawings, pictures & plans
Rambling thoughts about the ar-10 & -15  (Started: Mar. 7 2013, 02:46 ET, Last post: Mar. 9 2013, 06:22 ET)
Related to building one from scratch
.223 vs 5.56 extractor  (Started: Mar. 2 2013, 11:04 ET, Last post: Mar. 3 2013, 18:10 ET)
Bolt carrier blueprints  (Started: Jan. 23 2013, 01:37 ET, Last post: Jan. 23 2013, 19:10 ET)
Engineering drawings
Rescue plan for botched lower forging  (Started: Oct. 19 2008, 11:48 ET, Last post: Jan. 20 2013, 19:00 ET)
Pivot hole is off
Advice for a total machining idiot getting started  (Started: Jan. 12 2013, 03:41 ET, Last post: Jan. 20 2013, 10:06 ET)
Check out this great ar-15 build!  (Started: Oct. 29 2008, 14:12 ET, Last post: Jan. 11 2013, 18:27 ET)
Ar-15 lower made of wood and hdpe
80% supplier list  (Started: Nov. 20 2012, 10:30 ET, Last post: Nov. 25 2012, 12:15 ET)
A list of known blank and jig suppliers
New source for 0% forgings  (Started: Sep. 29 2012, 17:04 ET, Last post: Sep. 30 2012, 15:00 ET)
Muzzle brake  (Started: Sep. 6 2012, 14:29 ET, Last post: Sep. 8 2012, 18:31 ET)
Help designing a brake for my ar
Mag wells  (Started: Jul. 27 2012, 10:27 ET, Last post: Jul. 28 2012, 21:26 ET)
80% lower. which one?  (Started: Jul. 14 2012, 22:41 ET, Last post: Jul. 28 2012, 17:19 ET)
Colfax tactical  (Started: Jul. 15 2012, 16:58 ET, Last post: Jul. 15 2012, 16:58 ET)
Any one buy from them
Ar 15 barrel issue  (Started: May 30 2010, 17:55 ET, Last post: Jul. 8 2012, 11:04 ET)
Whats happened to tactical machining  (Started: Apr. 16 2012, 16:17 ET, Last post: Jul. 2 2012, 14:37 ET)
Are they out of business
Best upper for ar  (Started: May 27 2012, 17:05 ET, Last post: Jun. 25 2012, 11:28 ET)
Whats best
$13 ar15 forgings  (Started: May 6 2012, 19:04 ET, Last post: Jun. 24 2012, 22:16 ET)
Anyone tried these
Ar15 a3 upper forgings 0%  (Started: May 19 2012, 21:58 ET, Last post: May 19 2012, 21:58 ET)
Who has finished one?
Ar in 7.62x39  (Started: Apr. 23 2012, 15:29 ET, Last post: Apr. 28 2012, 17:22 ET)
Anyone have one
Ar .22 dedicated upper  (Started: Apr. 15 2012, 17:05 ET, Last post: Apr. 17 2012, 11:44 ET)
Sarco ar15 kits  (Started: Jan. 1 2012, 17:10 ET, Last post: Apr. 16 2012, 20:49 ET)
Are they any good
Completing a tactical machine lower  (Started: Dec. 24 2011, 12:33 ET, Last post: Mar. 8 2012, 18:47 ET)
Whats needed
Headspace gauges for ar 15  (Started: Feb. 20 2012, 22:20 ET, Last post: Mar. 5 2012, 21:09 ET)
Barrel blueprints?  (Started: Feb. 7 2012, 15:51 ET, Last post: Feb. 14 2012, 12:15 ET)
Strippred ar lowers  (Started: Jan. 20 2012, 07:28 ET, Last post: Jan. 28 2012, 08:48 ET)
Small shop purchase
Coupons for tactical machine  (Started: Jan. 9 2012, 13:40 ET, Last post: Jan. 9 2012, 21:52 ET)
How do i get one
80% lowers  (Started: Nov. 11 2011, 21:23 ET, Last post: Dec. 29 2011, 14:48 ET)
Tactical machining kits  (Started: Dec. 18 2011, 12:30 ET, Last post: Dec. 29 2011, 14:35 ET)
How good are they
AR-15 Project Update  (Started: Dec. 16 2002, 21:46 ET, Last post: Dec. 28 2011, 03:25 ET)
My AR-15 Lower Receiver Project
Threads on ar15 upper  (Started: Dec. 20 2011, 19:15 ET, Last post: Dec. 20 2011, 21:48 ET)
What is the thread size on the upper?
Errata for ray-vin 0% ar lower machining instrucs  (Started: Nov. 16 2011, 23:31 ET, Last post: Nov. 20 2011, 19:29 ET)
Notes from machining my 0% lower
Zero to one hundred machining ar15 lower forging  (Started: Nov. 1 2011, 23:17 ET, Last post: Nov. 17 2011, 03:25 ET)
Gasport location on x25 upper  (Started: Jul. 16 2011, 17:53 ET, Last post: Nov. 14 2011, 09:49 ET)
Ar-15 pistol buffer  (Started: Nov. 7 2011, 20:20 ET, Last post: Nov. 8 2011, 12:31 ET)
Barrel length question  (Started: Oct. 26 2011, 18:34 ET, Last post: Oct. 27 2011, 23:14 ET)
Shortening a barrel
Wtb ss billet or ?%  (Started: Oct. 1 2011, 20:18 ET, Last post: Oct. 8 2011, 21:39 ET)
Looking for a stainless steel billet
Aim surplus, spike's receiver  (Started: Sep. 20 2011, 00:45 ET, Last post: Oct. 3 2011, 09:47 ET)
"low shelf for use with rdias"
Ar bcg  (Started: Sep. 2 2011, 10:46 ET, Last post: Sep. 2 2011, 22:44 ET)
Tech info
12 gauge ar (ar 12)  (Started: Aug. 29 2011, 10:57 ET, Last post: Aug. 31 2011, 11:26 ET)
Ar upper chambered in 12 gauge
Mill / drill jigs  (Started: Aug. 24 2011, 00:48 ET, Last post: Aug. 26 2011, 16:15 ET)
Barrel made from bolt action take-off  (Started: Aug. 10 2011, 11:04 ET, Last post: Aug. 10 2011, 20:41 ET)
Ar15 castings  (Started: Jun. 3 2007, 02:16 ET, Last post: Jul. 31 2011, 19:00 ET)
Next pour
243 wssm upper  (Started: Mar. 2 2011, 17:37 ET, Last post: Jun. 1 2011, 14:15 ET)
Best jig for 0% lower build  (Started: Oct. 14 2010, 15:56 ET, Last post: May 25 2011, 13:59 ET)
Vz58 barrel in ar  (Started: Jul. 15 2009, 22:57 ET, Last post: Apr. 10 2011, 22:59 ET)
Just ordered one for $25
Castle nut  (Started: Mar. 29 2011, 21:20 ET, Last post: Mar. 30 2011, 19:29 ET)
Gas block position  (Started: Mar. 28 2011, 12:16 ET, Last post: Mar. 30 2011, 11:00 ET)
Ar15 m9 bayonet lug cad?  (Started: Feb. 19 2011, 14:21 ET, Last post: Mar. 27 2011, 01:58 ET)
Bolt carrier question  (Started: Mar. 15 2011, 18:27 ET, Last post: Mar. 15 2011, 22:27 ET)
Thinwater upper  (Started: Jan. 30 2011, 00:00 ET, Last post: Feb. 17 2011, 13:29 ET)
Can't seat magazine...
Where to go to see  (Started: Feb. 1 2011, 11:18 ET, Last post: Feb. 1 2011, 18:45 ET)
Mag well
My first ar  (Started: Jan. 21 2006, 10:50 ET, Last post: Jan. 24 2011, 18:22 ET)
(hopefully)
30% lowers now a regular item  (Started: Dec. 2 2010, 14:52 ET, Last post: Dec. 2 2010, 20:18 ET)
Ar forgings with the magizine well cut
Change in our 80% lowers- atf requirement  (Started: Jul. 1 2010, 16:49 ET, Last post: Nov. 24 2010, 19:08 ET)
What price would be fair for magwell cut forging  (Started: Jul. 31 2008, 00:04 ET, Last post: Nov. 12 2010, 20:17 ET)
Ar15 lower forging with just the magwell
Lets see your 80% builds  (Started: Oct. 10 2010, 17:47 ET, Last post: Nov. 11 2010, 20:11 ET)
Homebrew olympic 9mm barrel  (Started: Nov. 8 2010, 01:05 ET, Last post: Nov. 11 2010, 13:44 ET)
From a cheap numrich .357 blank
80% lowers to canada?  (Started: Sep. 2 2010, 11:04 ET, Last post: Sep. 22 2010, 23:48 ET)
Ar10 blue prints?  (Started: Aug. 17 2002, 23:49 ET, Last post: Sep. 22 2010, 10:27 ET)
Any sources?
Ar-15 pumpssemiauto ar-15  (Started: Aug. 27 2010, 15:49 ET, Last post: Aug. 31 2010, 22:33 ET)
Ak magwell lower from a 0% forging?  (Started: Aug. 8 2010, 22:19 ET, Last post: Aug. 28 2010, 12:14 ET)
7075 too brittle??  (Started: Aug. 20 2010, 23:45 ET, Last post: Aug. 28 2010, 00:47 ET)
6061 vs 7075 smoke and mirrors
Ar 9mm barrel dimensions.  (Started: Aug. 5 2010, 15:29 ET, Last post: Aug. 6 2010, 13:47 ET)
Simple flash hider  (Started: Jul. 11 2010, 19:23 ET, Last post: Jul. 29 2010, 09:53 ET)
Testing it on a 7.5 inch barrel
Im thinking of going carbon fiber  (Started: Jul. 13 2010, 22:21 ET, Last post: Jul. 17 2010, 20:40 ET)
Gas piston full atuo video  (Started: Jul. 6 2010, 00:05 ET, Last post: Jul. 6 2010, 02:03 ET)
Excell spread sheet  (Started: Jul. 5 2010, 14:17 ET, Last post: Jul. 5 2010, 15:17 ET)
Bushings for fcg?  (Started: Apr. 16 2010, 20:25 ET, Last post: Jul. 2 2010, 23:47 ET)
Looking for specific 80% lower  (Started: Jun. 21 2010, 12:45 ET, Last post: Jun. 24 2010, 20:20 ET)
24" rifle gas port diameter  (Started: Jun. 5 2010, 22:56 ET, Last post: Jun. 24 2010, 18:30 ET)
Looking for it quick
Ar-15 build  (Started: Mar. 30 2005, 12:18 ET, Last post: Jun. 11 2010, 10:41 ET)
What color do you like?
Brazing lower help  (Started: Jan. 24 2010, 00:10 ET, Last post: May 31 2010, 05:28 ET)
Proxxon micro mill mf 70  (Started: May 10 2010, 23:14 ET, Last post: May 11 2010, 00:33 ET)
Anyone use one?
Buffer tube tap...anyone?  (Started: Apr. 14 2010, 01:28 ET, Last post: May 3 2010, 17:32 ET)
Olympic arms ar15 9mm  (Started: Apr. 15 2010, 09:23 ET, Last post: May 2 2010, 14:53 ET)
Need pics or dimension of the bolt
Hogue free float tube - ar-15  (Started: Mar. 15 2010, 09:01 ET, Last post: Apr. 11 2010, 18:59 ET)
Has anyone installed one of these????
Modular ar15  (Started: Jul. 6 2008, 15:01 ET, Last post: Apr. 8 2010, 14:26 ET)
Just thinking out loud ...
Looking for a reconmendation  (Started: Feb. 25 2010, 13:45 ET, Last post: Mar. 10 2010, 18:47 ET)
Windage adjustable ar front sight  (Started: Mar. 8 2010, 09:15 ET, Last post: Mar. 8 2010, 15:16 ET)
.308 upper  (Started: Mar. 2 2010, 11:39 ET, Last post: Mar. 2 2010, 11:47 ET)
Thinwaters 308 80%  (Started: Feb. 2 2010, 20:48 ET, Last post: Mar. 1 2010, 17:13 ET)
Ar-15 gas blocks  (Started: Feb. 26 2010, 09:58 ET, Last post: Mar. 1 2010, 07:19 ET)
Adjustable design
Anodizing lower  (Started: Feb. 24 2010, 16:04 ET, Last post: Feb. 26 2010, 16:21 ET)
Ar 15 80% jig  (Started: Jan. 18 2010, 21:00 ET, Last post: Feb. 25 2010, 10:01 ET)
Drill press reccomendations  (Started: Jan. 20 2010, 10:47 ET, Last post: Jan. 21 2010, 20:42 ET)
Another 80% manufacturer  (Started: Jan. 15 2010, 20:57 ET, Last post: Jan. 18 2010, 09:55 ET)
80% lowers in full production  (Started: Aug. 18 2009, 12:47 ET, Last post: Jan. 13 2010, 17:29 ET)
Buffer tower reamer???  (Started: Sep. 25 2009, 11:55 ET, Last post: Jan. 1 2010, 15:53 ET)
Wildcat .338 in an ar  (Started: Dec. 1 2009, 22:53 ET, Last post: Dec. 27 2009, 14:45 ET)
Just need to name it and chamber barrel
Cheap build  (Started: Nov. 22 2009, 20:08 ET, Last post: Dec. 14 2009, 23:56 ET)
Ar-15 lower build  (Started: Nov. 25 2009, 15:29 ET, Last post: Nov. 30 2009, 00:41 ET)
Need tips
Ar upper with a relocated operating spring  (Started: Oct. 24 2009, 20:26 ET, Last post: Nov. 13 2009, 15:20 ET)
7.62x25 tok conversion  (Started: Nov. 24 2008, 10:07 ET, Last post: Nov. 5 2009, 23:36 ET)
Brls & reamers
Home annodizing  (Started: Aug. 31 2009, 21:55 ET, Last post: Sep. 8 2009, 15:58 ET)
I thought you couldn't sell "assault weapon"  (Started: Sep. 2 2009, 15:20 ET, Last post: Sep. 6 2009, 07:40 ET)
Parts on ebay!
Summer blow out sale  (Started: Aug. 31 2009, 12:49 ET, Last post: Aug. 31 2009, 12:49 ET)
Kto billet ar's 1911's
Finishing the cnc10 10% lower  (Started: Jul. 20 2009, 02:20 ET, Last post: Aug. 9 2009, 18:36 ET)
Using a modified cncguns jig
Is a cast zinc ar-15 receiver possible/practical?  (Started: Jul. 30 2009, 01:46 ET, Last post: Aug. 8 2009, 12:19 ET)
Machining the yellow logic sten ar lower  (Started: Jun. 28 2009, 23:17 ET, Last post: Aug. 2 2009, 20:06 ET)
80%
5.45x39 bolts  (Started: Jul. 13 2009, 11:01 ET, Last post: Jul. 25 2009, 20:30 ET)
Available, don't need
Ar in .410??? any info on one?  (Started: Jun. 4 2009, 15:24 ET, Last post: Jul. 7 2009, 13:55 ET)
Ar15 5.45x39 gas port dia  (Started: Jun. 19 2009, 16:13 ET, Last post: Jun. 24 2009, 07:06 ET)
Bolt and carrier  (Started: Jun. 19 2009, 15:52 ET, Last post: Jun. 21 2009, 18:58 ET)
Ar-15 bolt and carrier
Ar 10mm upper?  (Started: Jun. 8 2009, 22:09 ET, Last post: Jun. 8 2009, 22:11 ET)
Where to buy forgings?  (Started: Jun. 8 2009, 13:38 ET, Last post: Jun. 8 2009, 16:17 ET)
Yellow logic sten ar lower  (Started: Jun. 2 2009, 21:31 ET, Last post: Jun. 7 2009, 01:36 ET)
Got one!
Ar-15 parts blueprints  (Started: Mar. 25 2009, 21:58 ET, Last post: Jun. 3 2009, 20:35 ET)
Looking for parts blueprints
Ar 9mm w/ sten barrel  (Started: Mar. 8 2009, 01:10 ET, Last post: Jun. 3 2009, 14:56 ET)
Need help with some measurements
Cutting the rear radius  (Started: Feb. 28 2005, 18:00 ET, Last post: May 20 2009, 21:50 ET)
Oversize holes for type iii anodizing?  (Started: May 8 2009, 15:45 ET, Last post: May 11 2009, 21:38 ET)
Need help with question  (Started: Apr. 29 2009, 10:40 ET, Last post: Apr. 29 2009, 10:44 ET)
What can i buy
Ar-10 vs. ar-15  (Started: Apr. 20 2009, 15:59 ET, Last post: Apr. 25 2009, 00:28 ET)
Lower i.d. help  (Started: Mar. 15 2009, 20:12 ET, Last post: Apr. 21 2009, 22:45 ET)
Short a2 stock  (Started: Apr. 14 2009, 23:52 ET, Last post: Apr. 14 2009, 23:54 ET)
Semi-entry, ~a1 length
50gi  (Started: Feb. 13 2009, 20:05 ET, Last post: Apr. 11 2009, 20:07 ET)
Anyone play with this one?
Lower parts kit  (Started: Mar. 9 2009, 00:42 ET, Last post: Apr. 6 2009, 14:53 ET)
Who's got them in stock?
.300 whisper reamer - $160 + shipping!  (Started: Apr. 3 2009, 10:53 ET, Last post: Apr. 6 2009, 08:46 ET)
Are they nuts!!!
Installing barrel extension  (Started: Mar. 26 2009, 18:20 ET, Last post: Mar. 26 2009, 23:42 ET)
Torque specs
Lower fixtures  (Started: Mar. 28 2008, 18:21 ET, Last post: Mar. 26 2009, 10:25 ET)
Making lowers
Ar10/sr25 magwell dimensions  (Started: Mar. 24 2009, 10:46 ET, Last post: Mar. 25 2009, 15:42 ET)
Sr25 dimensions needed
Ar15 pistol  (Started: Mar. 15 2009, 17:35 ET, Last post: Mar. 15 2009, 21:54 ET)
Anybody know the rules?
Ar-57 upper  (Started: Mar. 7 2009, 13:35 ET, Last post: Mar. 10 2009, 17:23 ET)
That funny 5.7x28mm upper
Ar grip model  (Started: Jan. 24 2009, 01:56 ET, Last post: Mar. 8 2009, 12:54 ET)
Locking lug clearance question  (Started: Feb. 17 2009, 19:19 ET, Last post: Mar. 5 2009, 22:23 ET)
45acp gas upper  (Started: Dec. 17 2008, 13:19 ET, Last post: Mar. 5 2009, 13:24 ET)
She runs!
Started machining!  (Started: Aug. 25 2006, 22:11 ET, Last post: Mar. 2 2009, 07:53 ET)
Receivers
Retro done  (Started: Feb. 28 2009, 15:11 ET, Last post: Mar. 2 2009, 00:47 ET)
Turn around time for dsa  (Started: Dec. 4 2008, 17:54 ET, Last post: Feb. 28 2009, 09:38 ET)
Noob question about the ar15  (Started: Jan. 19 2008, 10:46 ET, Last post: Feb. 26 2009, 07:35 ET)
Ar15 easier than 1911
#42 drill bit or 3/32" drill bit?  (Started: Jan. 14 2009, 22:09 ET, Last post: Feb. 24 2009, 06:04 ET)
Upper assembly threads  (Started: Feb. 16 2009, 21:49 ET, Last post: Feb. 17 2009, 08:14 ET)
Hammer release after slow trigger release  (Started: Feb. 15 2009, 00:09 ET, Last post: Feb. 15 2009, 13:08 ET)
Cav-15 magwell dims?  (Started: Feb. 13 2009, 21:11 ET, Last post: Feb. 13 2009, 21:11 ET)
Forging prints  (Started: Jan. 21 2009, 13:58 ET, Last post: Feb. 13 2009, 00:21 ET)
I am looking for forging prints
80% casting  (Started: Jan. 19 2009, 22:52 ET, Last post: Feb. 6 2009, 10:14 ET)
Old-timer...
My ar15 build begins.  (Started: Nov. 10 2008, 22:55 ET, Last post: Feb. 3 2009, 00:54 ET)
Off to a nice rocky start!
6 lugs for ar-15 style bolt?  (Started: Sep. 1 2008, 14:58 ET, Last post: Jan. 28 2009, 22:44 ET)
I read that a 6 lug bolt was better?
.204 ruger  (Started: Jan. 21 2009, 00:47 ET, Last post: Jan. 24 2009, 13:20 ET)
Did some building
Bead blasting finish on lower?  (Started: Jan. 18 2009, 22:27 ET, Last post: Jan. 23 2009, 12:19 ET)
Modified lo-pro  (Started: Jan. 21 2009, 00:52 ET, Last post: Jan. 22 2009, 01:20 ET)
Brass deflector for short cases
Lowers on a rotary picture  (Started: Jan. 6 2009, 02:16 ET, Last post: Jan. 20 2009, 05:55 ET)
Making lots of lowers, how to
New lower done!  (Started: Jan. 18 2009, 15:25 ET, Last post: Jan. 18 2009, 20:30 ET)
Ar15 lowers on the haas vf2 ss vmc
Mag catch center jig  (Started: Jan. 18 2009, 17:05 ET, Last post: Jan. 18 2009, 19:59 ET)
What do you start with?  (Started: Apr. 14 2004, 18:40 ET, Last post: Jan. 18 2009, 14:14 ET)
When Making an AR lower...
I could use some help  (Started: Jan. 15 2009, 14:36 ET, Last post: Jan. 17 2009, 23:15 ET)
Ar 15 files
Newbie ar owner ?s  (Started: Jan. 13 2009, 16:26 ET, Last post: Jan. 15 2009, 00:42 ET)
Lookin for info
Need some help  (Started: Dec. 30 2008, 17:43 ET, Last post: Jan. 14 2009, 10:46 ET)
Need measurements on a butt plate
Charging handle prints  (Started: Jan. 12 2009, 20:59 ET, Last post: Jan. 12 2009, 20:59 ET)
Looking for prints
Anyone have drawings of this?  (Started: Jan. 7 2009, 22:14 ET, Last post: Jan. 11 2009, 02:34 ET)
AR-15 Upper Receiver  (Started: Feb. 14 2003, 17:04 ET, Last post: Jan. 7 2009, 18:47 ET)
Project Update
Tools for installing the barrel extention  (Started: Nov. 25 2008, 21:41 ET, Last post: Jan. 1 2009, 18:35 ET)
Recomend a good kit  (Started: Apr. 29 2008, 01:04 ET, Last post: Dec. 26 2008, 12:48 ET)
What's good?
338br ar15  (Started: Dec. 24 2008, 09:44 ET, Last post: Dec. 24 2008, 09:44 ET)
Why not?
Headspacing an ar  (Started: Nov. 21 2008, 19:22 ET, Last post: Dec. 21 2008, 13:23 ET)
Installing the barrel extension
Looking for blueprint of...  (Started: Dec. 14 2008, 20:10 ET, Last post: Dec. 15 2008, 07:31 ET)
My new bigbore round  (Started: Nov. 20 2008, 08:44 ET, Last post: Dec. 5 2008, 11:23 ET)
How deep does the ar-15 magwell have to be?  (Started: Dec. 3 2008, 23:29 ET, Last post: Dec. 4 2008, 21:24 ET)
If designing a lower from scratch.
Hardened barrel?  (Started: Dec. 3 2008, 13:55 ET, Last post: Dec. 4 2008, 08:38 ET)
10mm  (Started: Mar. 29 2008, 09:19 ET, Last post: Nov. 24 2008, 10:02 ET)
Building a gas operated 10mm upper
Bolt catch release spring hole depth question  (Started: Nov. 21 2008, 19:42 ET, Last post: Nov. 21 2008, 20:08 ET)
Bolt carrier print  (Started: Nov. 11 2008, 16:26 ET, Last post: Nov. 11 2008, 17:18 ET)
Solid model in library
Takedown pin mis-alignment  (Started: Nov. 6 2008, 23:30 ET, Last post: Nov. 9 2008, 16:58 ET)
Which pins more critical?
Suggestions for stripped 100% lowers?  (Started: Nov. 3 2008, 15:17 ET, Last post: Nov. 6 2008, 11:19 ET)
Oa-93 family uppers  (Started: Nov. 3 2008, 02:13 ET, Last post: Nov. 3 2008, 09:46 ET)
How do they work?
Steel receiver  (Started: Oct. 24 2008, 15:10 ET, Last post: Oct. 24 2008, 16:45 ET)
Noveske kx3 flash suppressor  (Started: Sep. 25 2008, 18:27 ET, Last post: Oct. 23 2008, 11:05 ET)
Anybody have one?
Messed with a kel-tek today  (Started: Dec. 31 2006, 19:39 ET, Last post: Oct. 15 2008, 13:55 ET)
Su-16a
Home anodized upper done  (Started: Jul. 7 2008, 01:02 ET, Last post: Sep. 24 2008, 01:26 ET)
Low buck anodizing ar15 upper
Tommy-15  (Started: Aug. 22 2008, 19:43 ET, Last post: Aug. 22 2008, 19:43 ET)
Whatever happened to it?
Parts suppliers  (Started: Aug. 9 2008, 23:30 ET, Last post: Aug. 15 2008, 14:17 ET)
Reliable and fair prices
A2/a1 buttstock swap  (Started: Aug. 6 2008, 20:57 ET, Last post: Aug. 7 2008, 23:58 ET)
What additional parts are needed?
Homemade broaching machine 4 ar upper  (Started: Jun. 30 2008, 17:58 ET, Last post: Jul. 31 2008, 13:08 ET)
Homemade broaching rig
Wtt:  dpms glacier guards  (Started: Jul. 27 2008, 22:18 ET, Last post: Jul. 31 2008, 06:46 ET)
Leaking gasblock  (Started: Apr. 29 2008, 09:26 ET, Last post: Jul. 23 2008, 15:43 ET)
Kt-15b  (Started: Sep. 15 2005, 18:22 ET, Last post: Jul. 7 2008, 18:47 ET)
In production
Machined gas block done!!  (Started: Jun. 10 2008, 11:22 ET, Last post: Jun. 12 2008, 13:47 ET)
Barrel twist  (Started: May 5 2008, 01:46 ET, Last post: Jun. 10 2008, 18:17 ET)
Re-hardening trigger surface  (Started: May 3 2008, 20:45 ET, Last post: Jun. 3 2008, 21:42 ET)
Home built gas piston upper for ar  (Started: Aug. 3 2007, 08:51 ET, Last post: Jun. 2 2008, 21:56 ET)
Looks easy enough
Ar-15 barrel contour blueprints  (Started: May 9 2008, 18:10 ET, Last post: May 10 2008, 15:31 ET)
.204, gas system questions  (Started: May 4 2008, 14:19 ET, Last post: May 4 2008, 14:19 ET)
Flash hider removal  (Started: Apr. 24 2008, 17:44 ET, Last post: May 2 2008, 18:43 ET)
Need sound advice
Brl length  (Started: Apr. 12 2008, 19:29 ET, Last post: Apr. 16 2008, 17:30 ET)
Determining brl length.
Re-testicularization of an a/r  (Started: Mar. 30 2008, 15:35 ET, Last post: Apr. 13 2008, 00:08 ET)
Erasing the effects of the awb
Gas block holes and gas tube length  (Started: Apr. 8 2008, 20:35 ET, Last post: Apr. 12 2008, 15:22 ET)
I am a master of overcomplication...
Ar parts interchange questions  (Started: Apr. 6 2008, 12:12 ET, Last post: Apr. 7 2008, 13:55 ET)
Buffer tube hole  (Started: Feb. 17 2008, 17:26 ET, Last post: Apr. 3 2008, 16:26 ET)
Manufacturing question
Need anodizing/teflon coating in bulk  (Started: Mar. 21 2008, 16:34 ET, Last post: Mar. 22 2008, 14:41 ET)
Kt's 4 part lower  (Started: Mar. 19 2008, 17:15 ET, Last post: Mar. 21 2008, 14:03 ET)
What else could have been done?
As-15  (Started: Jul. 25 2007, 05:20 ET, Last post: Mar. 20 2008, 15:08 ET)
Ar-15 shotgun
Ar-15 project planning  (Started: Mar. 17 2008, 20:46 ET, Last post: Mar. 18 2008, 14:16 ET)
I need help in planning my project.
Straight gas tube block?  (Started: Mar. 5 2008, 14:08 ET, Last post: Mar. 5 2008, 14:08 ET)
Ar-15 quad rail  (Started: Feb. 26 2008, 03:46 ET, Last post: Mar. 4 2008, 22:32 ET)
Pistol gas hole and shoulder location  (Started: Jan. 27 2008, 22:50 ET, Last post: Mar. 2 2008, 22:33 ET)
9x45mm morse  (Started: Jul. 5 2006, 18:35 ET, Last post: Feb. 26 2008, 03:59 ET)
Any experience?
Shortened ar15 barrel  (Started: Feb. 24 2008, 15:07 ET, Last post: Feb. 25 2008, 20:55 ET)
Problems
Ar-15 side charging handle mod  (Started: Jan. 21 2008, 13:40 ET, Last post: Feb. 25 2008, 13:20 ET)
How to?
Opening up an ar15 bolt  (Started: Jan. 31 2008, 18:08 ET, Last post: Feb. 20 2008, 19:46 ET)
What bit?
Any one have any dealings, with?  (Started: Feb. 18 2008, 10:04 ET, Last post: Feb. 20 2008, 13:36 ET)
Ar-15 tooling and parts
Need help finding a3 upper forging with no fa  (Started: Feb. 16 2008, 21:29 ET, Last post: Feb. 19 2008, 20:54 ET)
Magazine size  (Started: Feb. 12 2008, 06:33 ET, Last post: Feb. 14 2008, 13:18 ET)
Would anyone be willing to trade me a buffer tube?  (Started: Feb. 1 2008, 16:07 ET, Last post: Feb. 4 2008, 16:53 ET)
Who's got 80 % lowers around here?  (Started: Jan. 30 2008, 18:07 ET, Last post: Feb. 3 2008, 20:41 ET)
Ar15 brl extension/threads.  (Started: Jan. 31 2008, 17:41 ET, Last post: Jan. 31 2008, 17:41 ET)
Anyone done this before?
Bolt stop spring/plunger hole  (Started: Jan. 27 2008, 05:03 ET, Last post: Jan. 27 2008, 05:03 ET)
Homemade buis  (Started: Jan. 25 2008, 15:04 ET, Last post: Jan. 25 2008, 16:08 ET)
Thinking about building an ak-47  (Started: Jan. 19 2008, 14:43 ET, Last post: Jan. 22 2008, 19:45 ET)
Do they make a kit....
Ar-15 lower surface area?  (Started: Jan. 18 2008, 15:30 ET, Last post: Jan. 22 2008, 10:31 ET)
Ar-15 lower project pics  (Started: Jan. 18 2008, 15:49 ET, Last post: Jan. 21 2008, 08:58 ET)
Got one done . . .
Ar-15 drill jig  (Started: Jan. 18 2008, 20:46 ET, Last post: Jan. 19 2008, 12:29 ET)
A1 furniture  (Started: Jan. 14 2008, 08:12 ET, Last post: Jan. 18 2008, 05:35 ET)
Home built ar-10?  (Started: Jan. 7 2008, 09:22 ET, Last post: Jan. 14 2008, 14:34 ET)
Ar casting jig  (Started: Jan. 3 2008, 22:51 ET, Last post: Jan. 5 2008, 23:21 ET)
Which one to get?
Wtb buffer tube tap  (Started: Dec. 30 2007, 13:31 ET, Last post: Dec. 31 2007, 20:51 ET)
Buy or rent?
Choices of components  (Started: Oct. 19 2007, 13:28 ET, Last post: Dec. 31 2007, 16:26 ET)
For first ar- too much to choose from
Ar15 in 7mmtcu?  (Started: Dec. 20 2007, 11:26 ET, Last post: Dec. 22 2007, 11:47 ET)
.300whisper?
Ar15 fh  (Started: Dec. 13 2007, 17:43 ET, Last post: Dec. 17 2007, 17:18 ET)
The slots
Demilled lowers?  (Started: Oct. 8 2007, 15:05 ET, Last post: Dec. 17 2007, 16:33 ET)
Are they / have they been available?
12 days of armalite  (Started: Dec. 12 2007, 20:30 ET, Last post: Dec. 12 2007, 20:30 ET)
See trading post
Ar15 barrels  (Started: Dec. 8 2007, 08:27 ET, Last post: Dec. 8 2007, 18:13 ET)
Need help
Need help w/an ar  (Started: Jul. 10 2007, 01:17 ET, Last post: Dec. 4 2007, 09:16 ET)
Best options for upper/barrel  (Started: Nov. 27 2007, 02:58 ET, Last post: Dec. 1 2007, 06:28 ET)
Full auto  (Started: Nov. 27 2007, 19:13 ET, Last post: Nov. 28 2007, 08:33 ET)
Rhino system  (Started: Aug. 21 2007, 12:26 ET, Last post: Nov. 23 2007, 10:42 ET)
Aftermarket mod for ars
"d" stamped carrier and bolt?  (Started: Apr. 25 2007, 10:10 ET, Last post: Nov. 3 2007, 18:05 ET)
Forged upper build.  (Started: Oct. 24 2007, 22:37 ET, Last post: Oct. 25 2007, 19:43 ET)
Ar 9mm  (Started: Aug. 26 2007, 16:35 ET, Last post: Oct. 1 2007, 21:25 ET)
Will this work or did i just waste a blank?  (Started: Sep. 21 2007, 18:54 ET, Last post: Sep. 21 2007, 21:30 ET)
Using a cncguns.com jig on a 0% lower
Ar15 lower trigger set screw mod  (Started: Sep. 3 2007, 21:50 ET, Last post: Sep. 14 2007, 19:05 ET)
Any drawbacks?
Billet Lower completion photo's  (Started: Jan. 23 2003, 22:06 ET, Last post: Sep. 13 2007, 17:01 ET)
its done at last.
Olympic k3b?  (Started: Aug. 25 2007, 15:24 ET, Last post: Aug. 28 2007, 22:55 ET)
Whadda ya think?
80% done. now what?  (Started: Aug. 20 2007, 09:05 ET, Last post: Aug. 20 2007, 20:28 ET)
Most accurate uppers???  (Started: Jul. 23 2007, 10:33 ET, Last post: Aug. 11 2007, 20:30 ET)
Bolt carrier assembly?  (Started: Aug. 4 2007, 08:52 ET, Last post: Aug. 4 2007, 08:52 ET)
6.5 grendel hunter upper  (Started: Mar. 29 2006, 02:56 ET, Last post: Aug. 2 2007, 14:24 ET)
Just ordered
0% 3x5 cards  (Started: Jul. 29 2007, 16:17 ET, Last post: Jul. 29 2007, 16:17 ET)
Another ar problem  (Started: Jul. 23 2007, 10:56 ET, Last post: Jul. 24 2007, 16:35 ET)
Magazine issues - sort of
Carrier sticking halfway! help  (Started: Jul. 22 2007, 13:44 ET, Last post: Jul. 23 2007, 09:53 ET)
Wtf?
.308 ar - build it yourself?  (Started: Apr. 15 2007, 13:17 ET, Last post: Jul. 10 2007, 00:30 ET)
Anodizing  (Started: Jun. 5 2007, 14:59 ET, Last post: Jul. 7 2007, 14:41 ET)
AR-15 A3 Upper Receiver  (Started: Apr. 13 2003, 00:58 ET, Last post: Jul. 5 2007, 21:45 ET)
Project Update
Gas block question  (Started: Mar. 11 2007, 17:14 ET, Last post: Jul. 5 2007, 21:21 ET)
Tips for installing?
Ar45 lower receiver  (Started: Oct. 20 2005, 23:39 ET, Last post: Jul. 2 2007, 00:32 ET)
Using .45 cal m3a1 grease gun mags
Linear compensator  (Started: Feb. 18 2007, 08:31 ET, Last post: Jun. 28 2007, 17:37 ET)
Adjustable stock  (Started: Jun. 14 2007, 22:48 ET, Last post: Jun. 21 2007, 12:17 ET)
Making a adjustable stock from scratch
New gas tube  (Started: May 24 2007, 17:07 ET, Last post: Jun. 5 2007, 01:24 ET)
How do i do this
Tanneryshop's 80% lowers  (Started: May 3 2007, 16:44 ET, Last post: May 28 2007, 04:30 ET)
What is done, what needs to be done?
Ar15 pistol or rifle in 10mm  (Started: May 21 2007, 20:39 ET, Last post: May 25 2007, 13:57 ET)
Free float tube  (Started: May 5 2007, 11:41 ET, Last post: May 7 2007, 16:40 ET)
Index point for 0% forging  (Started: May 1 2007, 17:52 ET, Last post: May 4 2007, 14:41 ET)
Mag well chamfer: 45 or 60???  (Started: Apr. 26 2007, 22:05 ET, Last post: Apr. 30 2007, 07:54 ET)
Opinions?
Which kit or upper  (Started: Apr. 16 2007, 05:07 ET, Last post: Apr. 26 2007, 19:51 ET)
Del-ton vs rockriver vs others
Blackthorne products  (Started: Apr. 13 2007, 21:00 ET, Last post: Apr. 26 2007, 18:57 ET)
Ar lower specs v factory lowers  (Started: Apr. 23 2007, 09:54 ET, Last post: Apr. 23 2007, 09:54 ET)
Ar blueprint v. factory lowers
Ar15 lower from dsa casting  (Started: Apr. 20 2007, 12:30 ET, Last post: Apr. 22 2007, 05:33 ET)
Specs
Right side cocker  (Started: Apr. 13 2006, 00:12 ET, Last post: Apr. 17 2007, 18:02 ET)
Bolt carrier and upper on order
9x19 chamber specs?  (Started: Apr. 11 2007, 22:01 ET, Last post: Apr. 15 2007, 13:31 ET)
Ar rounds  (Started: Apr. 13 2007, 18:14 ET, Last post: Apr. 14 2007, 01:36 ET)
Little campfire talk about the ar15
Sbr  (Started: Apr. 11 2007, 16:49 ET, Last post: Apr. 13 2007, 13:54 ET)
Not yet final revision
Friend's new ar problem  (Started: Apr. 4 2007, 07:07 ET, Last post: Apr. 12 2007, 03:33 ET)
1/2x36tpi and 9/16x24tpi taps source  (Started: Apr. 11 2007, 07:57 ET, Last post: Apr. 11 2007, 21:59 ET)
"machining the ar-15 lower receiver forging"  (Started: Dec. 17 2005, 11:30 ET, Last post: Mar. 23 2007, 21:57 ET)
By ray brandes
Nm rear sight  (Started: Mar. 22 2007, 07:59 ET, Last post: Mar. 23 2007, 14:53 ET)
Maching guides for 0% lowers  (Started: Mar. 21 2007, 10:21 ET, Last post: Mar. 21 2007, 12:08 ET)
What's the diff?
Ar15 9mm bolt specs?  (Started: Feb. 11 2007, 17:12 ET, Last post: Mar. 19 2007, 07:56 ET)
Lower parts  (Started: Mar. 15 2007, 18:59 ET, Last post: Mar. 16 2007, 02:51 ET)
Triangular handguards  (Started: Nov. 16 2006, 21:08 ET, Last post: Mar. 10 2007, 13:26 ET)
Brand new and in original wrap
Anyone build an ar-15 in .17 remington?  (Started: Feb. 24 2007, 20:32 ET, Last post: Mar. 4 2007, 21:04 ET)
Anyone build an ar-15 in .17 remington?
Ar-15 prints  (Started: Feb. 8 2007, 20:59 ET, Last post: Mar. 2 2007, 21:07 ET)
Upper repair  (Started: Feb. 13 2007, 15:11 ET, Last post: Mar. 2 2007, 17:40 ET)
Takedown holes in wrong spot
Super cool new selector.  (Started: Feb. 19 2007, 13:54 ET, Last post: Feb. 25 2007, 11:31 ET)
Proto
Another question  (Started: Feb. 12 2007, 20:44 ET, Last post: Feb. 19 2007, 22:53 ET)
Is receiver strong enough
Mgi upper reciver  (Started: Mar. 25 2006, 17:56 ET, Last post: Feb. 19 2007, 11:02 ET)
How to install oversized safety selector?  (Started: Feb. 18 2007, 17:13 ET, Last post: Feb. 18 2007, 21:49 ET)
Can't remeber
Butt stock screw size  (Started: Feb. 13 2007, 11:22 ET, Last post: Feb. 16 2007, 10:47 ET)
Anyone know the correct size?
Barrel extension dimensions?  (Started: Feb. 12 2007, 20:44 ET, Last post: Feb. 14 2007, 10:42 ET)
Aluminum barrel nut for ff  (Started: Feb. 4 2007, 16:29 ET, Last post: Feb. 4 2007, 18:27 ET)
Shade tree armory?  (Started: Oct. 2 2006, 10:35 ET, Last post: Feb. 3 2007, 09:03 ET)
Flip up sigth drawings/plans  (Started: Jan. 28 2007, 09:08 ET, Last post: Jan. 30 2007, 22:34 ET)
Kalistan-legal ar15  (Started: Dec. 5 2006, 23:31 ET, Last post: Jan. 26 2007, 19:01 ET)
U15 stock
Parts dimensions help  (Started: Sep. 21 2006, 22:55 ET, Last post: Jan. 26 2007, 03:18 ET)
For scratch build
Ar15 bolt rotation?  (Started: Jan. 23 2007, 22:06 ET, Last post: Jan. 24 2007, 22:10 ET)
Question about anodizing  (Started: Jan. 17 2007, 10:17 ET, Last post: Jan. 20 2007, 13:02 ET)
Does anyone sell 0% ar 10 lower  (Started: Jan. 15 2007, 10:49 ET, Last post: Jan. 17 2007, 10:08 ET)
Another comp  (Started: Oct. 14 2006, 20:20 ET, Last post: Jan. 14 2007, 09:29 ET)
Slimline
Ar 15 barrel  (Started: Dec. 30 2006, 23:08 ET, Last post: Jan. 11 2007, 19:48 ET)
Where to find?
M4 feedramp??  (Started: Jan. 10 2007, 00:11 ET, Last post: Jan. 10 2007, 18:24 ET)
How's it different?
80% build  (Started: Dec. 28 2006, 15:43 ET, Last post: Dec. 30 2006, 15:33 ET)
Here comes the newbie!!!
Anyone do a 0% upper?  (Started: Dec. 28 2006, 20:22 ET, Last post: Dec. 29 2006, 07:57 ET)
Help identify spring  (Started: Dec. 28 2006, 07:39 ET, Last post: Dec. 29 2006, 00:11 ET)
Where's it go?
Mgi hydra  (Started: Dec. 18 2006, 08:43 ET, Last post: Dec. 19 2006, 19:52 ET)
15 minute trigger job warning  (Started: Aug. 27 2006, 16:08 ET, Last post: Dec. 16 2006, 19:24 ET)
Missed one
80% a1 lower  (Started: Dec. 9 2006, 13:29 ET, Last post: Dec. 11 2006, 10:50 ET)
??? for audibk  (Started: Dec. 2 2006, 08:37 ET, Last post: Dec. 6 2006, 19:32 ET)
Pistol grip screw size?  (Started: Dec. 2 2006, 18:35 ET, Last post: Dec. 2 2006, 19:29 ET)
Pistol length gas port length?  (Started: Nov. 23 2006, 01:05 ET, Last post: Nov. 23 2006, 01:05 ET)
5/32 long cut end mill  (Started: Nov. 8 2006, 14:06 ET, Last post: Nov. 21 2006, 08:53 ET)
Anybody know?
Holding the large end mill in the machine  (Started: Sep. 29 2006, 11:05 ET, Last post: Nov. 18 2006, 09:07 ET)
How to do it?
Need .223 rem chamber dimentions  (Started: Nov. 4 2006, 18:48 ET, Last post: Nov. 6 2006, 19:16 ET)
Ar15 lower  (Started: Dec. 17 2005, 13:06 ET, Last post: Oct. 8 2006, 22:34 ET)
Cutaway drawing
Ar-15 jig  (Started: Jun. 2 2006, 09:57 ET, Last post: Oct. 5 2006, 21:11 ET)
Need advice on what to get.
16" to 20" upper.  (Started: Sep. 26 2006, 22:38 ET, Last post: Sep. 29 2006, 00:15 ET)
Upper?
Holding the large end mill  (Started: Sep. 26 2006, 16:36 ET, Last post: Sep. 27 2006, 07:01 ET)
Pictures difference m16a1 to m16a2 disconnector  (Started: Sep. 23 2006, 10:31 ET, Last post: Sep. 23 2006, 10:31 ET)
0% upper  (Started: Sep. 10 2006, 18:24 ET, Last post: Sep. 22 2006, 07:56 ET)
Sidecocker ideas?  (Started: Aug. 9 2006, 19:44 ET, Last post: Sep. 19 2006, 18:34 ET)
Brainstorming for possible reciever
0% ar-10 lower  (Started: Sep. 19 2006, 17:56 ET, Last post: Sep. 19 2006, 17:56 ET)
Does anyone have a source?
Drill a hole wrong or egged out  (Started: Mar. 20 2006, 22:59 ET, Last post: Sep. 6 2006, 16:34 ET)
Here is a fix
Could a sr-25 magazine fit in a custom mag well ?  (Started: Sep. 3 2006, 01:19 ET, Last post: Sep. 3 2006, 01:19 ET)
Hmm
Bushings?  (Started: Aug. 29 2006, 01:35 ET, Last post: Aug. 29 2006, 20:32 ET)
Uhhhh
Ar weight reduction  (Started: Jul. 5 2006, 20:24 ET, Last post: Aug. 25 2006, 22:07 ET)
Machining recievers soon
Ar 180  (Started: Mar. 27 2006, 13:51 ET, Last post: Aug. 23 2006, 04:46 ET)
Fused with the sheetmetal ar lower?
Turning ar barrels  (Started: Jun. 20 2006, 18:44 ET, Last post: Aug. 9 2006, 09:41 ET)
Impact muzzle device  (Started: Jul. 29 2006, 15:31 ET, Last post: Jul. 29 2006, 16:11 ET)
Might reduce flash too
First ar build  (Started: May 30 2006, 22:43 ET, Last post: Jul. 24 2006, 01:54 ET)
Check it out!
Kt15b build question  (Started: Feb. 18 2006, 17:41 ET, Last post: Jul. 23 2006, 16:36 ET)
Do i need a jig too?
Ar 15 solid models  (Started: Jul. 8 2006, 16:31 ET, Last post: Jul. 20 2006, 22:01 ET)
Wow thats loud!  (Started: Jul. 11 2006, 22:11 ET, Last post: Jul. 19 2006, 23:15 ET)
Comp on ar15
Pin to bore dimension  (Started: Jun. 25 2006, 01:51 ET, Last post: Jun. 26 2006, 11:04 ET)
Ar15 barrel dimentions  (Started: Jun. 15 2006, 18:22 ET, Last post: Jun. 22 2006, 21:11 ET)
For gas block
A little ar painting going on  (Started: Apr. 15 2006, 21:39 ET, Last post: Jun. 20 2006, 19:35 ET)
Lower recivers  (Started: Jun. 8 2006, 13:50 ET, Last post: Jun. 13 2006, 14:42 ET)
Who casts or forges them??
Worst part of machining a forging  (Started: Apr. 20 2006, 13:23 ET, Last post: May 28 2006, 18:19 ET)
Let me do the hard part
Barrel extension attachment  (Started: May 5 2006, 16:53 ET, Last post: May 8 2006, 16:00 ET)
How is it attached?
0% forging  (Started: Mar. 24 2006, 13:42 ET, Last post: Apr. 29 2006, 21:09 ET)
Hammer pin  (Started: Mar. 9 2006, 07:21 ET, Last post: Apr. 26 2006, 19:12 ET)
It rotates
Pics of my ar in the hall of freedom  (Started: Apr. 11 2006, 22:54 ET, Last post: Apr. 11 2006, 22:54 ET)
Upper quest  (Started: Mar. 29 2006, 10:41 ET, Last post: Apr. 5 2006, 11:01 ET)
Drill bushings  (Started: Mar. 29 2006, 03:00 ET, Last post: Apr. 4 2006, 12:38 ET)
Pressed in for fcg
Need a buffer reamer and tap  (Started: Mar. 19 2006, 14:03 ET, Last post: Apr. 1 2006, 03:24 ET)
Who's going to let me borrow rent one
.458 socom  (Started: Mar. 29 2006, 20:44 ET, Last post: Mar. 29 2006, 20:44 ET)
Ar 15 building guide?  (Started: Mar. 28 2006, 20:14 ET, Last post: Mar. 28 2006, 21:04 ET)
Forward assist  (Started: Jan. 22 2006, 05:53 ET, Last post: Mar. 22 2006, 13:10 ET)
Ar-15 a2 upper receiver blueprints  (Started: Mar. 2 2006, 19:07 ET, Last post: Mar. 3 2006, 09:22 ET)
A couple more questions  (Started: Feb. 27 2006, 10:22 ET, Last post: Feb. 27 2006, 11:05 ET)
Modular ar-15 video on dvd  (Started: Jan. 13 2006, 23:09 ET, Last post: Feb. 26 2006, 07:12 ET)
What fits what?  (Started: Feb. 15 2006, 18:01 ET, Last post: Feb. 25 2006, 10:06 ET)
M4 in 3D  (Started: Mar. 15 2004, 08:42 ET, Last post: Feb. 22 2006, 01:55 ET)
Who sells ar taps?  (Started: Feb. 19 2006, 19:04 ET, Last post: Feb. 22 2006, 01:53 ET)
Kt-15b frame  (Started: Nov. 23 2005, 22:57 ET, Last post: Feb. 16 2006, 19:48 ET)
Ar15 hammer  (Started: Feb. 2 2006, 23:37 ET, Last post: Feb. 10 2006, 18:01 ET)
Cut down
Surplus m16 kit  (Started: Jan. 25 2006, 14:18 ET, Last post: Feb. 10 2006, 10:46 ET)
What do i need to make it legal?
Mags/mag catch for an ar-45  (Started: Jan. 4 2006, 01:38 ET, Last post: Feb. 10 2006, 09:15 ET)
Does anyone have a better mousetrap
Ar-15 gas piston operation  (Started: Jan. 23 2006, 13:06 ET, Last post: Feb. 9 2006, 19:00 ET)
Freefloat tube  (Started: Jan. 28 2006, 08:24 ET, Last post: Jan. 29 2006, 00:04 ET)
Material
Mag well opening questions  (Started: Jan. 25 2006, 21:55 ET, Last post: Jan. 25 2006, 21:55 ET)
Sarco ar-15 parts kit  (Started: Jan. 18 2006, 15:28 ET, Last post: Jan. 24 2006, 15:16 ET)
Anyone ever use one on a build?
Ar10 upper receiver problem  (Started: Jan. 18 2006, 16:16 ET, Last post: Jan. 24 2006, 14:25 ET)
Armalite m-15  (Started: Dec. 31 2005, 18:43 ET, Last post: Jan. 1 2006, 19:18 ET)
Who has one?
Drop everything  (Started: Nov. 11 2005, 06:21 ET, Last post: Dec. 31 2005, 00:29 ET)
Listen up
Barrel length question  (Started: Dec. 28 2005, 21:23 ET, Last post: Dec. 29 2005, 22:33 ET)
Building an ar
Ar pistol  (Started: Dec. 26 2005, 18:30 ET, Last post: Dec. 28 2005, 21:18 ET)
Question
Building a dissapator  (Started: Dec. 21 2005, 13:39 ET, Last post: Dec. 28 2005, 11:19 ET)
Using a1 handguards.
My bolt broke  (Started: Dec. 26 2005, 16:21 ET, Last post: Dec. 26 2005, 19:33 ET)
Twisted a1 upper  (Started: Dec. 22 2005, 21:57 ET, Last post: Dec. 25 2005, 21:45 ET)
9mm m-16  (Started: Dec. 18 2005, 07:47 ET, Last post: Dec. 18 2005, 21:09 ET)
How it works
Colt cult  (Started: Dec. 14 2005, 14:46 ET, Last post: Dec. 16 2005, 04:15 ET)
Telestock
Want to build a semi-auto m-16/ar-15 a1  (Started: Dec. 1 2005, 22:20 ET, Last post: Dec. 7 2005, 19:14 ET)
Looking for parts kits
.223 vs 9mm bolts  (Started: Dec. 4 2005, 14:42 ET, Last post: Dec. 5 2005, 22:01 ET)
Fellow canuk parts help  (Started: Nov. 12 2005, 10:34 ET, Last post: Nov. 30 2005, 11:42 ET)
Install a weaver rail on ff forend  (Started: Nov. 26 2005, 15:44 ET, Last post: Nov. 27 2005, 15:04 ET)
My buddies .50 beowulf
Gas piston uppers  (Started: Oct. 26 2005, 13:59 ET, Last post: Nov. 24 2005, 20:25 ET)
How do they work?
Tactical light mount  (Started: Nov. 21 2005, 15:41 ET, Last post: Nov. 23 2005, 11:11 ET)
Ar15 bolt stop  (Started: Nov. 21 2005, 16:17 ET, Last post: Nov. 22 2005, 23:38 ET)
Carbon-15 9mm carbine  (Started: Nov. 20 2005, 20:13 ET, Last post: Nov. 20 2005, 20:18 ET)
Bushmaster is selling a light 9mm car
Ar-15 pistol build  (Started: Nov. 18 2005, 08:47 ET, Last post: Nov. 18 2005, 18:36 ET)
Kt-15-b  (Started: Nov. 6 2005, 12:10 ET, Last post: Nov. 16 2005, 23:45 ET)
Nearly finished
Lower set-up jig  (Started: Nov. 11 2005, 15:54 ET, Last post: Nov. 12 2005, 00:33 ET)
Blueprints
Kt-15-b instructions  (Started: Oct. 4 2005, 12:25 ET, Last post: Oct. 27 2005, 22:36 ET)
Purrfect assembly
Kt-15-b  (Started: Oct. 27 2005, 18:32 ET, Last post: Oct. 27 2005, 18:32 ET)
Dimensions of magazine slot
User 556 ar15 lower improvement?  (Started: Oct. 10 2005, 07:43 ET, Last post: Oct. 26 2005, 12:09 ET)
Weld instead of screws?
Buffer hole size?  (Started: Oct. 22 2005, 21:20 ET, Last post: Oct. 22 2005, 22:31 ET)
Legal transfers  (Started: Oct. 13 2005, 11:11 ET, Last post: Oct. 13 2005, 11:11 ET)
My endorsement.
Bolt carrier length  (Started: Oct. 10 2005, 22:10 ET, Last post: Oct. 10 2005, 22:10 ET)
When using a bushmaster pistol buffer
Calif legal ar-15 build  (Started: Oct. 7 2005, 14:52 ET, Last post: Oct. 10 2005, 20:19 ET)
What about that magazine well?
Kns pushbutton takedown pin  (Started: Oct. 5 2005, 22:34 ET, Last post: Oct. 7 2005, 00:26 ET)
Fluffy's latest demand
Pivot/take down pins w/self contained detents  (Started: Oct. 6 2005, 00:23 ET, Last post: Oct. 6 2005, 00:23 ET)
Who makes them? and your thoughts
Fluffy the cat  (Started: Sep. 29 2005, 11:44 ET, Last post: Oct. 5 2005, 18:48 ET)
Kt-15-b
A-2 sight  (Started: Sep. 24 2005, 14:37 ET, Last post: Sep. 30 2005, 23:44 ET)
Liberated from carry handle
Ar 15 lower legality  (Started: Sep. 27 2005, 20:37 ET, Last post: Sep. 28 2005, 19:31 ET)
Lower handgrip solidmodel  (Started: Sep. 21 2005, 11:59 ET, Last post: Sep. 21 2005, 11:59 ET)
Lower handgrip solidmodel
Kt-15-b build  (Started: Sep. 15 2005, 10:21 ET, Last post: Sep. 17 2005, 21:55 ET)
Ultimate stealth build
Sumoi drum on an ar  (Started: Sep. 15 2005, 21:30 ET, Last post: Sep. 16 2005, 11:13 ET)
"homebuilt" .458 socom  (Started: Sep. 13 2005, 19:18 ET, Last post: Sep. 14 2005, 17:13 ET)
Are there parts available?
Single shot maadi griffin plans  (Started: Sep. 12 2005, 00:06 ET, Last post: Sep. 13 2005, 10:48 ET)
Need help
Rooinek magazines  (Started: Mar. 10 2005, 20:41 ET, Last post: Sep. 12 2005, 16:22 ET)
English ar-15 magazines
Ar 10 using fal mags (imperial)  (Started: Sep. 11 2005, 23:37 ET, Last post: Sep. 11 2005, 23:37 ET)
Anyh help with sites,plans,parts 2make
Threads??  (Started: Apr. 16 2004, 17:27 ET, Last post: Sep. 7 2005, 19:24 ET)
Operation hairball  (Started: Aug. 22 2005, 14:27 ET, Last post: Sep. 7 2005, 14:27 ET)
It's finished
Magazine dimension request  (Started: Aug. 20 2005, 17:35 ET, Last post: Aug. 20 2005, 17:35 ET)
Magazines for a .45acp ar 15 lower
Tender vittles  (Started: Aug. 18 2005, 09:02 ET, Last post: Aug. 19 2005, 14:49 ET)
Anodizing yesterday
Extra holes around gas tube entry  (Started: Apr. 2 2005, 15:58 ET, Last post: Aug. 19 2005, 12:39 ET)
Ar barrel source  (Started: Aug. 6 2005, 20:59 ET, Last post: Aug. 7 2005, 16:06 ET)
Want a good quality bbl w/o iron sight
Post ban upper  (Started: Jul. 28 2005, 19:24 ET, Last post: Jul. 29 2005, 11:35 ET)
Muzzle break removal
Which forged 80 lower  (Started: Jul. 13 2005, 02:34 ET, Last post: Jul. 26 2005, 17:32 ET)
70% lower  (Started: Jul. 22 2005, 23:04 ET, Last post: Jul. 23 2005, 18:18 ET)
.50 bmg
Ar15 9mm barrel  (Started: Jun. 24 2005, 16:50 ET, Last post: Jul. 18 2005, 21:12 ET)
Ar in .204  (Started: Jul. 8 2005, 10:43 ET, Last post: Jul. 17 2005, 12:33 ET)
Interesting build
Best Jig?  (Started: Jun. 24 2004, 22:20 ET, Last post: Jul. 3 2005, 14:58 ET)
0% upper forging  (Started: Jun. 27 2005, 22:31 ET, Last post: Jul. 3 2005, 13:27 ET)
Anyone completed one yet
Model 1 Sales  (Started: Nov. 20 2003, 23:49 ET, Last post: Jun. 27 2005, 17:32 ET)
Ar-10 buffer  (Started: May 8 2005, 10:43 ET, Last post: Jun. 22 2005, 03:00 ET)
Ar-15 extractor question  (Started: Jun. 19 2005, 05:01 ET, Last post: Jun. 20 2005, 04:17 ET)
Ar15 solidmodel and/or blueprint parts  (Started: Nov. 2 2004, 01:27 ET, Last post: Jun. 16 2005, 05:39 ET)
Anybody have them???
Ar15 m4 building kit bushmaster 80% lower  (Started: Jun. 7 2005, 01:00 ET, Last post: Jun. 9 2005, 00:17 ET)
Do i have everything i need? any sugg...
What 100% receiver is used to  (Started: Jun. 7 2005, 10:45 ET, Last post: Jun. 7 2005, 21:07 ET)
Non-annodized upper  (Started: Mar. 15 2005, 09:15 ET, Last post: May 18 2005, 00:25 ET)
How about a custom build?  (Started: Apr. 29 2005, 00:12 ET, Last post: Apr. 29 2005, 10:00 ET)
Like occ or something
Best place to buy 80% forgings??  (Started: Nov. 25 2004, 01:40 ET, Last post: Apr. 18 2005, 11:49 ET)
M16 armorer kit  (Started: Apr. 3 2005, 16:19 ET, Last post: Apr. 5 2005, 16:54 ET)
Ar15 plastic lowers - home fab?  (Started: Apr. 4 2005, 12:19 ET, Last post: Apr. 4 2005, 12:19 ET)
Home fab of molded reinforced plastic
Challenge rifle  (Started: Apr. 1 2005, 10:50 ET, Last post: Apr. 1 2005, 17:03 ET)
Ar for maarten
Degree of turn for a bolt?  (Started: Mar. 28 2005, 09:50 ET, Last post: Mar. 28 2005, 22:22 ET)
Anyone recall what this is?
Plans needed:  bolt and carrier  (Started: Mar. 24 2005, 09:32 ET, Last post: Mar. 28 2005, 21:36 ET)
Ar-15 build-off  (Started: Mar. 16 2005, 11:50 ET, Last post: Mar. 23 2005, 01:35 ET)
The catnip special
Upper's barrel ring threads  (Started: Mar. 18 2005, 14:29 ET, Last post: Mar. 18 2005, 14:55 ET)
Lower reciever mod  (Started: Mar. 9 2005, 15:34 ET, Last post: Mar. 16 2005, 03:49 ET)
California Legal - You can have it all!!!  (Started: Dec. 5 2003, 21:51 ET, Last post: Mar. 13 2005, 13:27 ET)
Build any AR you want
Ar-15 build-off  (Started: Mar. 1 2005, 17:14 ET, Last post: Mar. 11 2005, 04:00 ET)
Grahamcracker vs. royce
Ar-15 magazines  (Started: Mar. 10 2005, 15:20 ET, Last post: Mar. 10 2005, 17:37 ET)
How long do they last?
Measurement needed  (Started: Mar. 7 2005, 10:52 ET, Last post: Mar. 9 2005, 13:52 ET)
Oddball lower materials  (Started: Feb. 8 2003, 11:04 ET, Last post: Mar. 1 2005, 17:42 ET)
who had done it?
9mm ar ramblings...  (Started: Dec. 31 2004, 00:02 ET, Last post: Mar. 1 2005, 04:19 ET)
.50 bmg upper (ul50)  (Started: Feb. 28 2005, 15:13 ET, Last post: Feb. 28 2005, 19:03 ET)
Colt 9mm  mag block  (Started: Feb. 26 2005, 17:30 ET, Last post: Feb. 26 2005, 17:30 ET)
Need photo of roll pin locations
Happy birthday arby  (Started: Feb. 15 2005, 06:49 ET, Last post: Feb. 17 2005, 12:16 ET)
Oogabooga
***DRILL JIG RENTAL ****  (Started: Sep. 29 2002, 01:17 ET, Last post: Feb. 17 2005, 00:44 ET)
IM GOING TO DO IT AGIAN!
How tall is ar from pg to top of stock?  (Started: Feb. 16 2005, 15:56 ET, Last post: Feb. 16 2005, 17:37 ET)
Dpms lowers any good?  (Started: Feb. 16 2005, 12:39 ET, Last post: Feb. 16 2005, 15:40 ET)
Question for m16 armorers  (Started: Feb. 15 2005, 19:42 ET, Last post: Feb. 16 2005, 04:48 ET)
Marushin pfc replica xm177  (Started: Feb. 14 2005, 21:24 ET, Last post: Feb. 14 2005, 23:44 ET)
Ar-10 demill receiver sections $100  (Started: Feb. 14 2005, 14:35 ET, Last post: Feb. 14 2005, 21:12 ET)
Polymer 80% lowers?  (Started: Jan. 22 2005, 20:05 ET, Last post: Feb. 10 2005, 00:05 ET)
Side loaded ar-15?  (Started: Feb. 8 2005, 11:44 ET, Last post: Feb. 8 2005, 15:49 ET)
Inquiring minds want to know?  (Started: Feb. 3 2005, 22:37 ET, Last post: Feb. 3 2005, 23:27 ET)
What keeps the buffer retaining pin in?
Dignity restored  (Started: Jan. 31 2005, 13:56 ET, Last post: Feb. 1 2005, 11:20 ET)
Unbannig the ar
80% ar lower finishing.  (Started: Jan. 28 2005, 21:55 ET, Last post: Jan. 30 2005, 20:38 ET)
Machining from billet  (Started: Jan. 27 2005, 09:32 ET, Last post: Jan. 30 2005, 02:04 ET)
So far - so good
What size glass bead should i use on an ar15 lower  (Started: Jan. 26 2005, 21:03 ET, Last post: Jan. 27 2005, 06:08 ET)
Has any one here used an esential arms receiver?  (Started: Jan. 14 2005, 18:35 ET, Last post: Jan. 26 2005, 14:00 ET)
Lower dimentions  (Started: Jan. 21 2005, 00:53 ET, Last post: Jan. 24 2005, 13:28 ET)
Fal fcg w/ar-15 upper&adaptor for mag?  (Started: Jan. 23 2005, 19:40 ET, Last post: Jan. 23 2005, 21:31 ET)
Working on my 0% forgings  (Started: Jan. 11 2005, 23:31 ET, Last post: Jan. 20 2005, 21:37 ET)
M16 Full Auto Bolt  (Started: Dec. 10 2003, 13:42 ET, Last post: Jan. 16 2005, 22:29 ET)
7.62x39mm ar?  (Started: Dec. 14 2004, 01:07 ET, Last post: Jan. 12 2005, 17:11 ET)
Drilling m-16 mags  (Started: Dec. 19 2004, 11:13 ET, Last post: Jan. 10 2005, 16:17 ET)
.22cal ar15 upper  (Started: Jan. 2 2005, 11:06 ET, Last post: Jan. 3 2005, 14:23 ET)
Beltfed
Looking to build a .45acp ar  (Started: Jan. 2 2005, 14:55 ET, Last post: Jan. 2 2005, 14:55 ET)
Any end user experience with uppers?
5.56mm bfa gas restrictor hole sizes.  (Started: Dec. 31 2004, 07:49 ET, Last post: Dec. 31 2004, 07:49 ET)
.50 upper  (Started: Dec. 16 2004, 22:22 ET, Last post: Dec. 18 2004, 18:34 ET)
Ar-15 lower
Shade tree armory  (Started: Dec. 15 2004, 20:28 ET, Last post: Dec. 16 2004, 20:41 ET)
First 0% build complete  (Started: Dec. 11 2004, 19:23 ET, Last post: Dec. 15 2004, 01:02 ET)
Phoenix flash hider  (Started: Dec. 2 2004, 18:42 ET, Last post: Dec. 13 2004, 20:26 ET)
Going out to all who want to add one . .
Ar legality  (Started: Dec. 11 2004, 12:26 ET, Last post: Dec. 13 2004, 00:14 ET)
Missing hammer j pin  (Started: Dec. 4 2004, 12:26 ET, Last post: Dec. 10 2004, 18:59 ET)
80% ar without mag well cut  (Started: Dec. 6 2004, 18:25 ET, Last post: Dec. 7 2004, 16:56 ET)
Need best ar book  (Started: Nov. 29 2004, 13:40 ET, Last post: Dec. 4 2004, 12:05 ET)
How to build from scratch
lowers and bake-on finishes  (Started: Jul. 1 2004, 03:47 ET, Last post: Dec. 2 2004, 13:37 ET)
Building a 50 bmg lower from a forging  (Started: Nov. 30 2004, 17:11 ET, Last post: Dec. 1 2004, 16:15 ET)
Assembling an AR-15 upper  (Started: Oct. 6 2004, 12:25 ET, Last post: Nov. 17 2004, 07:45 ET)
Did I do it properly
AR upper 0%  (Started: Aug. 25 2003, 02:12 ET, Last post: Nov. 11 2004, 07:13 ET)
has anyone done one yet?
Lar grizzly arms  (Started: Nov. 9 2004, 12:59 ET, Last post: Nov. 9 2004, 17:47 ET)
Cheap ar-15 upper receivers.
Ar15 suppressor from scratch question...  (Started: Nov. 2 2004, 07:57 ET, Last post: Nov. 2 2004, 12:30 ET)
More AR-15 tribulations  (Started: Oct. 21 2004, 17:09 ET, Last post: Oct. 25 2004, 14:10 ET)
What was Stoner thinking about?
Bent Casting what are options  (Started: Oct. 3 2004, 20:48 ET, Last post: Oct. 3 2004, 22:39 ET)
bent Casting
what does dupe post mean  (Started: Oct. 2 2004, 09:22 ET, Last post: Oct. 2 2004, 15:24 ET)
AR-15 kit ?  (Started: Sep. 30 2004, 20:02 ET, Last post: Oct. 2 2004, 12:21 ET)
I need M16/AR15 Small Parts Blueprints  (Started: Oct. 1 2004, 22:55 ET, Last post: Oct. 1 2004, 22:55 ET)
The guts not the receivers
TOOLING BUY BACK AND  JIG RENTAL  (Started: Dec. 28 2002, 00:16 ET, Last post: Sep. 26 2004, 03:11 ET)
AR help  (Started: Sep. 18 2004, 16:12 ET, Last post: Sep. 19 2004, 19:30 ET)
detent hole breather
Calif. Project re: Grip issue  (Started: Apr. 20 2004, 13:43 ET, Last post: Aug. 29 2004, 22:36 ET)
30 round AR magazines  (Started: Aug. 27 2004, 10:10 ET, Last post: Aug. 28 2004, 04:34 ET)
Where to get them cheap.
She purred all night.  (Started: Aug. 18 2004, 07:56 ET, Last post: Aug. 26 2004, 12:57 ET)
AR-15 better than catnip
Fluffy's AR-15 questions  (Started: Aug. 25 2004, 19:45 ET, Last post: Aug. 25 2004, 20:32 ET)
Bolt carriers and other mysteries.
Tapping Buffer  (Started: Aug. 21 2004, 19:13 ET, Last post: Aug. 22 2004, 19:47 ET)
A1 Detachable Rear Sight/Rail  (Started: Aug. 22 2004, 16:55 ET, Last post: Aug. 22 2004, 16:55 ET)
New Finished Projects
About the Tannery cast lowers  (Started: Aug. 18 2004, 15:28 ET, Last post: Aug. 21 2004, 11:02 ET)
A question.
thinking of buying a new AR-15  (Started: Aug. 20 2004, 11:31 ET, Last post: Aug. 20 2004, 18:45 ET)
any suggestions
AR-15 DIAS  (Started: Jul. 17 2004, 13:07 ET, Last post: Aug. 19 2004, 12:04 ET)
Comapatibility with DIAS
Thread specs for barrel extension...  (Started: Aug. 17 2004, 23:41 ET, Last post: Aug. 18 2004, 14:25 ET)
Need to finish this lingering project
Lower Rec. Material?  (Started: Aug. 16 2004, 07:16 ET, Last post: Aug. 17 2004, 11:45 ET)
need pdf version of M16 lower  (Started: Aug. 16 2004, 14:37 ET, Last post: Aug. 17 2004, 11:45 ET)
Complete...
Best Jig 2  (Started: Aug. 16 2004, 23:12 ET, Last post: Aug. 16 2004, 23:12 ET)
AWB sunset celabratory build  (Started: Aug. 5 2004, 13:10 ET, Last post: Aug. 16 2004, 19:39 ET)
post-post-ban pistol build
Starting a new project  (Started: Aug. 15 2004, 14:24 ET, Last post: Aug. 15 2004, 15:28 ET)
Need some help/sources
Stainless lower  (Started: Aug. 14 2004, 23:04 ET, Last post: Aug. 14 2004, 23:22 ET)
Has anyone built a CA legal AR?  (Started: Aug. 14 2004, 18:05 ET, Last post: Aug. 14 2004, 21:28 ET)
Subscribe Now before the change  (Started: Aug. 3 2004, 14:27 ET, Last post: Aug. 13 2004, 21:31 ET)
20 A2 Government barrel profile  (Started: Aug. 13 2004, 18:10 ET, Last post: Aug. 13 2004, 18:10 ET)
Building a replica
MIL-SPEC AR-15?  (Started: Aug. 7 2004, 14:56 ET, Last post: Aug. 11 2004, 09:19 ET)
AR-15 Receiver Specifications
Looking for solid models, have some to offer too!  (Started: Aug. 3 2004, 02:30 ET, Last post: Aug. 6 2004, 17:10 ET)
Need AR15 Bolt Carrier, and disconnector
You guys see this?  (Started: Aug. 6 2004, 01:00 ET, Last post: Aug. 6 2004, 01:00 ET)
AR15 stuff for sale
ar parts  (Started: Aug. 1 2004, 20:09 ET, Last post: Aug. 3 2004, 01:09 ET)
New AR-15 Scope Mount w/ handle  (Started: Jul. 29 2004, 11:58 ET, Last post: Aug. 2 2004, 18:43 ET)
Would this work?
Need help choosing an upper or KIT  (Started: Jul. 31 2004, 20:41 ET, Last post: Jul. 31 2004, 20:41 ET)
Hello, and a Question on Upper receiver machining  (Started: Jun. 8 2004, 10:42 ET, Last post: Jul. 30 2004, 18:15 ET)
RayVin AR-15 Lower Receiver Build  (Started: Jul. 28 2004, 01:28 ET, Last post: Jul. 30 2004, 10:54 ET)
Any of you guys seen this?
Best place to buy a FAB10 or CA legal AR reciever  (Started: Jul. 24 2004, 13:47 ET, Last post: Jul. 24 2004, 19:44 ET)
As it says
80% Lower Help!  (Started: Jul. 19 2004, 19:02 ET, Last post: Jul. 23 2004, 11:22 ET)
AR15 w/ 37mm launch tube  (Started: Jul. 17 2004, 22:42 ET, Last post: Jul. 19 2004, 14:59 ET)
Have you seen these things!!!
Welding on Tannery casting?  (Started: Jul. 16 2004, 17:58 ET, Last post: Jul. 17 2004, 19:03 ET)
Anybody tried this?
A1 De-Handle Group Buy  (Started: Jul. 14 2004, 11:36 ET, Last post: Jul. 16 2004, 20:46 ET)
Fab-10  (Started: Jun. 9 2004, 20:23 ET, Last post: Jul. 16 2004, 01:54 ET)
POS or worth them money?
WTS 80% AR LOWER  (Started: Jul. 13 2004, 10:42 ET, Last post: Jul. 13 2004, 14:49 ET)
Trigger Guard Drill Size?  (Started: Jul. 9 2004, 01:03 ET, Last post: Jul. 10 2004, 12:19 ET)
It's Alive (all most)  (Started: Jul. 2 2004, 01:45 ET, Last post: Jul. 4 2004, 12:21 ET)
Ar build, need to ask ATF first?  (Started: Jun. 19 2004, 20:55 ET, Last post: Jun. 28 2004, 02:06 ET)
Got a idea for the PRK but need legal input  (Started: Jun. 27 2004, 02:24 ET, Last post: Jun. 27 2004, 17:30 ET)
An Ar-10 or Ar-15
Simple AR drawing  (Started: Jun. 4 2004, 12:10 ET, Last post: Jun. 25 2004, 16:05 ET)
from a simple man with a simple cat
Can some one double check I got everything i need.  (Started: Jun. 25 2004, 02:35 ET, Last post: Jun. 25 2004, 11:54 ET)
"Print" for Gas block sight base?  (Started: Jun. 23 2004, 13:58 ET, Last post: Jun. 23 2004, 13:58 ET)
6.8mm uppers  (Started: Jun. 16 2004, 15:56 ET, Last post: Jun. 17 2004, 21:54 ET)
Anyone built a california legal AR10?  (Started: Jun. 17 2004, 19:35 ET, Last post: Jun. 17 2004, 19:35 ET)
My new colt dedicated .22 20" A2 HBAR upper  (Started: Jun. 10 2004, 14:21 ET, Last post: Jun. 10 2004, 14:21 ET)
.22LR AR Question.  (Started: Jun. 8 2004, 22:05 ET, Last post: Jun. 9 2004, 18:57 ET)
didnt see anything in previous posts...
slight mess up on kt reciever  (Started: Jun. 1 2004, 23:18 ET, Last post: Jun. 4 2004, 09:02 ET)
Large Capacity Magazines  (Started: Jun. 1 2004, 21:32 ET, Last post: Jun. 2 2004, 10:43 ET)
Modification to hold only 10-rounds
anodizing at home?  (Started: Jun. 1 2004, 17:34 ET, Last post: Jun. 2 2004, 10:32 ET)
anyone try it?
finish options?  (Started: Jun. 2 2004, 04:43 ET, Last post: Jun. 2 2004, 09:37 ET)
gun-kote vs. aluma-hyde vs. ?
Using CNC Gunsmithing's blocks  (Started: May 15 2004, 09:34 ET, Last post: May 29 2004, 16:29 ET)
Fluffy's excellent AR-15 adventure
bolt action AR upper  (Started: Apr. 19 2004, 14:24 ET, Last post: May 27 2004, 17:41 ET)
I want to, but how?
25% CNC AR  (Started: May 7 2004, 09:55 ET, Last post: May 27 2004, 12:20 ET)
Thanks Justin!
How to mount a bayonet?  (Started: May 21 2004, 09:17 ET, Last post: May 26 2004, 21:46 ET)
Question on AR-15 lower materials  (Started: May 24 2004, 23:36 ET, Last post: May 26 2004, 19:44 ET)
Trigger Group Details  (Started: May 18 2004, 16:32 ET, Last post: May 19 2004, 13:42 ET)
Trigger Group
Nylon lower recievers  (Started: May 12 2004, 17:05 ET, Last post: May 14 2004, 12:53 ET)
Calvary arms ar-15 lower made of plastic
Bushmaster Dissapator Upper  (Started: May 12 2004, 23:30 ET, Last post: May 13 2004, 00:29 ET)
Which stock to use.
Detent  (Started: May 12 2004, 10:30 ET, Last post: May 12 2004, 21:50 ET)
What are they and how to install them?
Waffenfabrik Stemmler  (Started: May 9 2004, 00:11 ET, Last post: May 9 2004, 00:11 ET)
How I tapped the buffer tube
Buffer tube TAP for LOAN ???  (Started: May 6 2004, 22:45 ET, Last post: May 7 2004, 00:12 ET)
Anyone have one to loan out ??
What To Do With the Gas Tube Hole?  (Started: May 6 2004, 14:40 ET, Last post: May 6 2004, 16:34 ET)
AR Gas piston conversion?  (Started: Dec. 31 2003, 20:13 ET, Last post: May 6 2004, 11:18 ET)
M16 parts dimensions  (Started: Apr. 30 2004, 20:27 ET, Last post: May 5 2004, 19:21 ET)
Mechanically firing an AR-15  (Started: Mar. 28 2004, 16:22 ET, Last post: May 4 2004, 12:54 ET)
Is it legal?
position of 80% in OSI jig  (Started: May 3 2004, 12:08 ET, Last post: May 4 2004, 02:05 ET)
Scratchbuilt AR10  (Started: Apr. 29 2004, 11:07 ET, Last post: May 3 2004, 05:19 ET)
Adjustabble gas block : explain how to...  (Started: May 2 2004, 22:58 ET, Last post: May 2 2004, 22:58 ET)
Hi, I'm new here....  (Started: Apr. 26 2004, 16:04 ET, Last post: May 2 2004, 11:14 ET)
And thought I would ask a question.....
anyone build a NOC forged 80%  (Started: Apr. 29 2004, 11:59 ET, Last post: Apr. 29 2004, 17:57 ET)
Cali Legal AR15 "rifle grip" design  (Started: Apr. 26 2004, 15:52 ET, Last post: Apr. 28 2004, 00:07 ET)
What do you think? Will it work?
KT AR10/FAL  (Started: Apr. 27 2004, 04:21 ET, Last post: Apr. 27 2004, 09:21 ET)
Advanced Armaments Inc.  (Started: Apr. 25 2004, 23:13 ET, Last post: Apr. 25 2004, 23:13 ET)
45 cal AR-15  (Started: Apr. 23 2004, 11:12 ET, Last post: Apr. 23 2004, 13:02 ET)
0% Fordging book  (Started: Apr. 11 2004, 04:25 ET, Last post: Apr. 21 2004, 10:44 ET)
Exelent, must read info
a little help  (Started: Apr. 18 2004, 19:17 ET, Last post: Apr. 19 2004, 12:04 ET)
im stuck again
Need a good picture of finished AR-15 receiver  (Started: Apr. 5 2004, 13:37 ET, Last post: Apr. 16 2004, 13:33 ET)
ar15 preband  (Started: Apr. 9 2004, 17:11 ET, Last post: Apr. 10 2004, 15:17 ET)
AR-15 pistol dimension question...  (Started: Apr. 9 2004, 09:13 ET, Last post: Apr. 9 2004, 09:13 ET)
AR-15 newbie with few questions.....  (Started: Mar. 24 2004, 21:47 ET, Last post: Apr. 3 2004, 17:10 ET)
drills and taps ????
pump action ar-15?  (Started: Mar. 22 2004, 12:49 ET, Last post: Apr. 3 2004, 00:04 ET)
any one tryed it?
south prk once again  (Started: Mar. 20 2004, 01:27 ET, Last post: Mar. 30 2004, 20:24 ET)
80% help
Cutaway Lower pictures  (Started: Mar. 26 2004, 12:46 ET, Last post: Mar. 27 2004, 23:42 ET)
Collapsed FC pocket walls.  (Started: Mar. 26 2004, 15:02 ET, Last post: Mar. 26 2004, 18:30 ET)
AR 15 40 S&W Bolt  (Started: Mar. 25 2004, 22:51 ET, Last post: Mar. 26 2004, 13:59 ET)
1 3/16ths, 16 TPI Taps for sale  (Started: Dec. 8 2002, 15:26 ET, Last post: Mar. 23 2004, 22:13 ET)
1 3/16ths, 16 TPI Taps for sale
mag slot for kt  (Started: Mar. 22 2004, 20:10 ET, Last post: Mar. 22 2004, 23:38 ET)
any ideas?
Help Locating AR15 Jigs  (Started: Mar. 21 2004, 12:21 ET, Last post: Mar. 21 2004, 17:30 ET)
Three newbie ar questions  (Started: Mar. 31 2002, 17:27 ET, Last post: Mar. 17 2004, 18:33 ET)
Ar pistol, folding stocks and m-16 parts
AR-15 Build  (Started: Mar. 13 2004, 10:49 ET, Last post: Mar. 15 2004, 12:36 ET)
Building First AR
80% Lowers....  (Started: Feb. 26 2004, 18:48 ET, Last post: Mar. 13 2004, 03:45 ET)
what side of forging do you guy indicate off??  (Started: Feb. 8 2004, 17:46 ET, Last post: Mar. 10 2004, 11:38 ET)
Lowest cost drills, reamer & tap for 80% AR15  (Started: Feb. 27 2004, 21:25 ET, Last post: Mar. 4 2004, 13:24 ET)
AR Buffer Tube Hole Tapping  (Started: Feb. 26 2004, 12:21 ET, Last post: Feb. 27 2004, 11:36 ET)
? - How to Tap the hole with hand tools
%80 lower, index off the mag release?  (Started: Feb. 16 2004, 17:08 ET, Last post: Feb. 18 2004, 09:31 ET)
KT ordnance lowers?  (Started: Nov. 30 2003, 14:33 ET, Last post: Feb. 16 2004, 21:24 ET)
Ceramic Metal matrix lower. Anyone finish one? Nee  (Started: Feb. 13 2004, 19:49 ET, Last post: Feb. 16 2004, 17:03 ET)
NOC 80% forged lowers arrived today  (Started: Jan. 9 2004, 16:01 ET, Last post: Feb. 14 2004, 00:23 ET)
Right barrel twist  (Started: Feb. 11 2004, 10:16 ET, Last post: Feb. 12 2004, 09:14 ET)
AR Muzzle Dim's  (Started: Feb. 10 2004, 20:14 ET, Last post: Feb. 10 2004, 20:14 ET)
This looks like a must do  (Started: Nov. 8 2003, 16:36 ET, Last post: Feb. 9 2004, 06:10 ET)
adapter for unmodified Suomi drums
Another AR15 0% guide...  (Started: Feb. 6 2004, 17:04 ET, Last post: Feb. 6 2004, 17:04 ET)
(But Pvt. Ryan's is still the best)
Hammer pin movement  (Started: Feb. 4 2004, 17:55 ET, Last post: Feb. 5 2004, 22:25 ET)
pin rotates with the hammer
Got a new mill now I need to get the tools!  (Started: Feb. 1 2004, 21:25 ET, Last post: Feb. 4 2004, 17:57 ET)
Bolt catch plunger- Dimensions?  (Started: Feb. 3 2004, 22:22 ET, Last post: Feb. 4 2004, 12:59 ET)
My first build it yourself AR15 project.  (Started: Dec. 28 2003, 11:02 ET, Last post: Feb. 4 2004, 11:58 ET)
I gonna use an 80% receiver HELP.
what's a good price on an %80 lower?  (Started: Jan. 16 2004, 02:36 ET, Last post: Feb. 4 2004, 11:40 ET)
Tubb 2000, AR10 and CA Law  (Started: Jan. 7 2004, 00:33 ET, Last post: Jan. 28 2004, 19:38 ET)
Please explain for a non CA resident
handguards  (Started: Jan. 15 2004, 13:49 ET, Last post: Jan. 18 2004, 00:57 ET)
0% forging purchase help  (Started: Jan. 6 2004, 21:47 ET, Last post: Jan. 9 2004, 19:36 ET)
AR-10 Lower Receiver  (Started: Jul. 12 2003, 19:48 ET, Last post: Jan. 6 2004, 12:37 ET)
CNC Machined From Billet
Anybody seeing lowers from NOC?  (Started: Dec. 12 2003, 15:47 ET, Last post: Dec. 31 2003, 19:56 ET)
MIA?
Cutt off 20" barrel to 16"  (Started: Dec. 25 2003, 13:07 ET, Last post: Dec. 30 2003, 11:00 ET)
Loose buffer tube  (Started: Dec. 24 2003, 05:10 ET, Last post: Dec. 24 2003, 09:50 ET)
Too much wobble in the drill press?
Olympic Pistol Caliber Conversions  (Started: Dec. 6 2003, 14:59 ET, Last post: Dec. 19 2003, 23:36 ET)
Build Done :)  (Started: Dec. 18 2003, 18:18 ET, Last post: Dec. 18 2003, 19:50 ET)
Front pushpin for large hole colt  (Started: Dec. 17 2003, 23:21 ET, Last post: Dec. 17 2003, 23:21 ET)
Screwed up 0% forging attempt already!!  (Started: Dec. 15 2003, 22:26 ET, Last post: Dec. 16 2003, 01:49 ET)
how do you find center of mag fence??
Ultramag50 on homemde lower  (Started: Dec. 13 2003, 15:16 ET, Last post: Dec. 14 2003, 23:51 ET)
Scratch-built receiver  (Started: Dec. 6 2003, 01:40 ET, Last post: Dec. 13 2003, 19:07 ET)
for 7.62x39
UltraMag50 Upper  (Started: Jun. 28 2003, 23:14 ET, Last post: Dec. 13 2003, 10:52 ET)
50BMG MAG Upper
Any problems with safety selector hole on 80%  (Started: Nov. 9 2003, 00:04 ET, Last post: Dec. 5 2003, 15:26 ET)
Drilling curved surfaces can be tough
Building my first AR questions  (Started: Dec. 3 2003, 15:12 ET, Last post: Dec. 3 2003, 17:13 ET)
Concerning legality and lower options
Need help with safety/selector detent hole  (Started: Dec. 1 2003, 00:10 ET, Last post: Dec. 3 2003, 00:43 ET)
I must be missing something obvious
100% Upper in the white  (Started: Nov. 12 2003, 15:42 ET, Last post: Dec. 2 2003, 20:04 ET)
So I want to do an 80%...  (Started: Nov. 18 2003, 19:50 ET, Last post: Dec. 2 2003, 17:21 ET)
AR wildcat single shot how to?  (Started: Dec. 1 2003, 11:57 ET, Last post: Dec. 1 2003, 16:18 ET)
Pivot Pin Built-In Detent  (Started: Nov. 26 2003, 23:41 ET, Last post: Nov. 29 2003, 02:11 ET)
Where to buy them
buffer tube question??  (Started: Nov. 25 2003, 19:35 ET, Last post: Nov. 25 2003, 19:50 ET)
what size reamer and tap??
shade tree armory  (Started: Nov. 3 2003, 21:00 ET, Last post: Nov. 24 2003, 14:00 ET)
0% AR15 Complete (pics)  (Started: Nov. 10 2003, 17:03 ET, Last post: Nov. 23 2003, 21:59 ET)
Building a .22 Cal dedicated upper. . .  (Started: Nov. 17 2003, 18:38 ET, Last post: Nov. 22 2003, 10:19 ET)
bill holmes Home Workshop Guns (9mm AR-15)  (Started: Oct. 20 2003, 15:12 ET, Last post: Nov. 21 2003, 11:45 ET)
legality
Need ideas for new project?  (Started: Nov. 20 2003, 17:32 ET, Last post: Nov. 21 2003, 10:58 ET)
Link to German site
AR10 Lower parts  (Started: Nov. 18 2003, 14:07 ET, Last post: Nov. 18 2003, 16:53 ET)
Are they the same as the AR15?
Colt SP-1  (Started: Nov. 12 2003, 15:31 ET, Last post: Nov. 17 2003, 23:21 ET)
NOC has online store  (Started: Nov. 17 2003, 16:36 ET, Last post: Nov. 17 2003, 16:36 ET)
M16 a1  (Started: Sep. 26 2003, 02:52 ET, Last post: Nov. 14 2003, 21:50 ET)
the origional
AR Trigger Job  (Started: Nov. 10 2003, 02:40 ET, Last post: Nov. 13 2003, 11:53 ET)
Any good info or links appreciated
0% AR15 Complete (pics)  (Started: Nov. 10 2003, 17:13 ET, Last post: Nov. 10 2003, 20:25 ET)
smaller pics
How to regulate ejection anglee  (Started: Nov. 9 2003, 10:37 ET, Last post: Nov. 9 2003, 12:09 ET)
Keep my brass in a neat little pile
Hammer beating receiver web  (Started: Oct. 13 2003, 23:52 ET, Last post: Nov. 9 2003, 10:04 ET)
adjustments to my first project
ar15 in 7.62x39?  (Started: Jan. 3 2003, 13:50 ET, Last post: Nov. 8 2003, 19:33 ET)
links to ar15 assembly  (Started: Nov. 6 2003, 14:26 ET, Last post: Nov. 8 2003, 09:45 ET)
DPMS LR308 / SR-25 Magwell  (Started: Oct. 3 2003, 01:53 ET, Last post: Nov. 6 2003, 21:08 ET)
dims for the above or blueprints
Annodizing done.  (Started: Nov. 6 2003, 19:16 ET, Last post: Nov. 6 2003, 19:16 ET)
Finally got a round to it.
Barrel Extension  (Started: Nov. 4 2003, 13:55 ET, Last post: Nov. 5 2003, 15:37 ET)
AR15 Pistol Buffer, Why So Heavy???  (Started: Oct. 3 2003, 18:47 ET, Last post: Nov. 1 2003, 20:21 ET)
Can the weight be reduced?
AR-10 Lower Receiver --  (Started: Oct. 2 2003, 22:05 ET, Last post: Oct. 30 2003, 22:54 ET)
CNC Machined from Billet
AR-15 Upper  (Started: Oct. 17 2003, 00:51 ET, Last post: Oct. 30 2003, 14:53 ET)
Where to find without forward assis boss
80% question  (Started: Sep. 3 2003, 21:34 ET, Last post: Oct. 27 2003, 21:21 ET)
which one?
Home made flash-hider  (Started: Oct. 25 2003, 21:48 ET, Last post: Oct. 26 2003, 13:56 ET)
for 300 whisper
match grade lower  (Started: Oct. 24 2003, 22:54 ET, Last post: Oct. 25 2003, 18:05 ET)
cant it be done in an 80% lower?
Word on the street............  (Started: Oct. 23 2003, 23:33 ET, Last post: Oct. 24 2003, 01:40 ET)
FAB-10 Modification  (Started: Oct. 11 2003, 01:10 ET, Last post: Oct. 23 2003, 10:34 ET)
Is this home-job AR-15 project Legal??
Hammer Forged Barrel?!?!?  (Started: Oct. 18 2003, 04:28 ET, Last post: Oct. 21 2003, 21:23 ET)
Am I missing something?
dlask 80% casting and OSI? Jig  (Started: Oct. 20 2003, 02:36 ET, Last post: Oct. 20 2003, 19:57 ET)
Havn't even started and already a ques.
FYI 80% NOC forgings  (Started: Oct. 17 2003, 14:13 ET, Last post: Oct. 19 2003, 01:41 ET)
AR-15 Patents  (Started: Oct. 15 2003, 15:36 ET, Last post: Oct. 17 2003, 10:33 ET)
Ar-15 Lower & Upper Receiver Patents
California law  (Started: Jun. 18 2003, 13:17 ET, Last post: Oct. 12 2003, 22:18 ET)
detach mag possible?
Shade Tree forging complete!  (Started: Feb. 14 2003, 17:13 ET, Last post: Oct. 12 2003, 02:43 ET)
Some pics...
Carbine free float tube....  (Started: Oct. 10 2003, 01:14 ET, Last post: Oct. 10 2003, 01:17 ET)
DCM legal type??
mini mill vs. ar-15 uper/lower  (Started: Sep. 27 2003, 06:06 ET, Last post: Oct. 7 2003, 10:37 ET)
Anyone know what happened to Shade Tree Armory?  (Started: Oct. 6 2003, 21:51 ET, Last post: Oct. 6 2003, 23:49 ET)
They just disappeared...
0% AR15 lower for 9mm Sten finished!  (Started: Sep. 29 2003, 11:45 ET, Last post: Oct. 1 2003, 19:06 ET)
AR-10 Lower Receiver -  (Started: Sep. 28 2003, 21:18 ET, Last post: Sep. 30 2003, 22:01 ET)
CNC Machined from Billet
Stress on Front Ears, How Much Is There?  (Started: Sep. 28 2003, 23:51 ET, Last post: Sep. 30 2003, 00:00 ET)
How thin can the material be?
Suomi 9mm drum + modded lower  (Started: Sep. 26 2003, 13:19 ET, Last post: Sep. 29 2003, 15:41 ET)
upper reciever 9mm-.223. are they the same?  (Started: Sep. 24 2003, 22:34 ET, Last post: Sep. 25 2003, 18:26 ET)
what differences are there?
First AR15-smaller pics  (Started: Sep. 24 2003, 18:08 ET, Last post: Sep. 25 2003, 11:00 ET)
New Forging  (Started: Sep. 21 2003, 20:12 ET, Last post: Sep. 24 2003, 01:43 ET)
Help Me Get Started
Best A2-style compensator?  (Started: Sep. 21 2003, 23:46 ET, Last post: Sep. 22 2003, 23:03 ET)
Forging on EBay  (Started: Sep. 22 2003, 10:06 ET, Last post: Sep. 22 2003, 10:26 ET)
Who makes these?
Will a plug tap work?  (Started: Sep. 20 2003, 08:32 ET, Last post: Sep. 21 2003, 19:41 ET)
buffer tap question.
Buffer tap question  (Started: Sep. 6 2003, 01:49 ET, Last post: Sep. 19 2003, 23:30 ET)
Always some sort of barrier...
Upper blueprints  (Started: Apr. 28 2002, 17:53 ET, Last post: Sep. 17 2003, 08:59 ET)
Getting upper prints made...
Cheapest source for A2 buttstocks (with parts)?  (Started: Sep. 14 2003, 08:36 ET, Last post: Sep. 14 2003, 13:37 ET)
Group purchase of raw forgings?  (Started: Jul. 30 2003, 09:56 ET, Last post: Sep. 13 2003, 23:01 ET)
What Kind of Lower is This?  (Started: Sep. 11 2003, 11:30 ET, Last post: Sep. 12 2003, 20:00 ET)
Mag catch Button hole question  (Started: Sep. 7 2003, 08:30 ET, Last post: Sep. 8 2003, 20:28 ET)
checking my figures
Vulcan Receivers  (Started: Sep. 8 2003, 09:10 ET, Last post: Sep. 8 2003, 09:10 ET)
Bolt not locking back on last shot?  (Started: Aug. 18 2003, 12:55 ET, Last post: Sep. 7 2003, 07:50 ET)
80% Lower - done machining  (Started: Sep. 2 2003, 09:39 ET, Last post: Sep. 4 2003, 13:15 ET)
DIY lower
Done!  (Started: Aug. 30 2003, 18:15 ET, Last post: Sep. 2 2003, 19:54 ET)
My first complete forging
Barrel thingy removal  (Started: Aug. 31 2003, 19:47 ET, Last post: Sep. 1 2003, 15:34 ET)
Silver solder normally?
Badger Ordnance  (Started: Sep. 1 2003, 11:13 ET, Last post: Sep. 1 2003, 11:19 ET)
AR tools and Hardware
Gas tube removal?  (Started: Aug. 31 2003, 11:05 ET, Last post: Aug. 31 2003, 23:19 ET)
replacing upper receiver
AR15 30 round mags from Dillon prec.  (Started: Aug. 28 2003, 20:49 ET, Last post: Aug. 30 2003, 00:39 ET)
Seem to be well priced.
Detachable carry handle  (Started: Aug. 25 2003, 19:58 ET, Last post: Aug. 29 2003, 16:49 ET)
Any one make one?
trying to find dwgs  (Started: Aug. 28 2003, 19:49 ET, Last post: Aug. 28 2003, 22:45 ET)
5/32" mag well corners instead of 1/8"  (Started: Aug. 21 2003, 06:08 ET, Last post: Aug. 28 2003, 19:16 ET)
Anyone done them?
Ever think about......  (Started: May 26 2003, 20:12 ET, Last post: Aug. 25 2003, 16:09 ET)
building an AR style pistol w/goodies?
Staying with in batf regulations  (Started: Aug. 21 2003, 18:41 ET, Last post: Aug. 21 2003, 19:06 ET)
Building a 80% lower from 0% Forging
Rock River Arms  (Started: Aug. 15 2003, 12:44 ET, Last post: Aug. 19 2003, 23:03 ET)
any good
9mm Adapter Block Dimensions needed  (Started: Aug. 15 2003, 01:44 ET, Last post: Aug. 19 2003, 01:51 ET)
I need to make a feed ramp and ejector
BTH  (Started: Aug. 8 2003, 14:52 ET, Last post: Aug. 15 2003, 15:59 ET)
Why is there no good jig ?
AR-15 Repair Job  (Started: Mar. 28 2003, 16:03 ET, Last post: Aug. 15 2003, 15:01 ET)
Scrap Receiver Build
Buffer retainer/spring problem  (Started: Aug. 11 2003, 15:40 ET, Last post: Aug. 13 2003, 03:54 ET)
Quick stupid question
Where to index off of?  (Started: Mar. 27 2002, 01:16 ET, Last post: Aug. 9 2003, 21:25 ET)
0% forging question
I like the 4 step process usedReamers for 80% AR15  (Started: Aug. 6 2003, 13:57 ET, Last post: Aug. 7 2003, 01:13 ET)
Where can I find the ones I need?
Anybody with a lathe want an easy $10?  (Started: Jul. 31 2003, 13:20 ET, Last post: Aug. 3 2003, 13:02 ET)
Need a short length of tapered drill rod
some questions about a 80% receiver  (Started: Jul. 9 2003, 14:17 ET, Last post: Aug. 3 2003, 12:59 ET)
Pinning rear sight  (Started: Aug. 1 2003, 16:28 ET, Last post: Aug. 2 2003, 01:47 ET)
AR15 7.62X39 Barrel  (Started: Mar. 24 2003, 03:34 ET, Last post: Aug. 1 2003, 23:05 ET)
Anyone got a place to buy one?
Yet another appearance?  (Started: Jul. 28 2003, 22:34 ET, Last post: Aug. 1 2003, 16:37 ET)
Advice for building a plinker  (Started: Jul. 27 2003, 23:02 ET, Last post: Aug. 1 2003, 12:27 ET)
what style AR is good for plinking
correcting slam fires  (Started: Jul. 31 2003, 14:06 ET, Last post: Aug. 1 2003, 07:35 ET)
Tips for drilling buffer pin in correct spot?  (Started: Jul. 28 2003, 12:09 ET, Last post: Jul. 31 2003, 20:43 ET)
Tips, tricks, etc would be helpful
One totally buggered forged lower  (Started: Jul. 28 2003, 12:39 ET, Last post: Jul. 30 2003, 06:03 ET)
Read all about my problems and mistakes
CAVALRY ARMS AR15 RECEIVER BUILDUP?  (Started: Jul. 28 2003, 22:50 ET, Last post: Jul. 29 2003, 10:08 ET)
Sterling AR 180 mag I.D. ??  (Started: Jul. 25 2003, 16:25 ET, Last post: Jul. 26 2003, 14:33 ET)
New AR-15 setup blocks / drill guide  (Started: Jun. 22 2003, 23:56 ET, Last post: Jul. 26 2003, 10:39 ET)
For Sale
Why is my Buffer Pin beat up?  (Started: Jul. 17 2003, 18:53 ET, Last post: Jul. 22 2003, 20:54 ET)
AR-15 mags on Ebay  (Started: Jul. 13 2003, 16:46 ET, Last post: Jul. 20 2003, 10:11 ET)
30 or 10 round mags?
Help - Buffer tube threads bad  (Started: Jul. 9 2003, 22:45 ET, Last post: Jul. 18 2003, 19:38 ET)
Lower Parts Kits  (Started: Jul. 17 2003, 01:43 ET, Last post: Jul. 18 2003, 04:38 ET)
Yay!  (Started: Jul. 17 2003, 02:33 ET, Last post: Jul. 17 2003, 02:33 ET)
AR w/ AK mags  (Started: Apr. 21 2003, 16:34 ET, Last post: Jul. 17 2003, 00:35 ET)
AR Books  (Started: Jul. 3 2003, 23:49 ET, Last post: Jul. 10 2003, 23:44 ET)
looking for good ones
Bolt and carrier  (Started: Jul. 9 2003, 17:20 ET, Last post: Jul. 10 2003, 11:03 ET)
What to look for, where to buy??
Gas Port on AR  (Started: Jul. 4 2003, 15:34 ET, Last post: Jul. 10 2003, 03:59 ET)
Cartridge question.  (Started: Jul. 1 2003, 22:41 ET, Last post: Jul. 3 2003, 22:08 ET)
Scratchbuilt AR15 receiver  (Started: Oct. 12 2002, 00:53 ET, Last post: Jul. 2 2003, 21:04 ET)
AR-15 Match Rifle - Right Hand Bolt Release  (Started: Jun. 30 2003, 12:53 ET, Last post: Jun. 30 2003, 12:53 ET)
what did I do wrong  (Started: Jun. 28 2003, 17:52 ET, Last post: Jun. 28 2003, 19:35 ET)
buffer spring binding
Duplicolor high heat engine paint  (Started: Jun. 14 2003, 19:11 ET, Last post: Jun. 28 2003, 15:14 ET)
what type and how to apply
M4 Barrel Dimensions  (Started: Jun. 9 2003, 20:36 ET, Last post: Jun. 22 2003, 19:23 ET)
Re-cut standard 16" barrel to M4 profile
AR-15 Vice Blocks  (Started: Jun. 20 2003, 15:06 ET, Last post: Jun. 20 2003, 15:06 ET)
0% Forging
Machine Cutting tools  (Started: Jun. 18 2003, 11:45 ET, Last post: Jun. 19 2003, 16:52 ET)
to finish a 0% lower
I've been searching and searching.......  (Started: Jun. 17 2003, 17:01 ET, Last post: Jun. 17 2003, 17:01 ET)
for dimensions of a A3 style handle
UltraMag50 Upper  (Started: Jun. 14 2003, 19:12 ET, Last post: Jun. 15 2003, 21:48 ET)
Kaliban Milling  (Started: May 20 2003, 14:49 ET, Last post: Jun. 14 2003, 14:32 ET)
milling an ar-15 in california
Rod MI  (Started: Jun. 2 2003, 13:51 ET, Last post: Jun. 10 2003, 17:08 ET)
Scratch Built Receiver
Mag Bodies Replacement and Repair  (Started: Jun. 7 2003, 12:25 ET, Last post: Jun. 8 2003, 10:19 ET)
Laws and regulations
RRA Upper ?  (Started: Jun. 6 2003, 17:25 ET, Last post: Jun. 7 2003, 13:49 ET)
New Mag Fed 50 BMG Upper tested out...  (Started: May 28 2003, 22:08 ET, Last post: Jun. 3 2003, 18:08 ET)
Building an upper  (Started: May 21 2003, 00:04 ET, Last post: May 31 2003, 20:51 ET)
Adjustable gas tubes  (Started: May 26 2003, 18:08 ET, Last post: May 29 2003, 09:41 ET)
Pivot and Take-Down Holes Without Jig  (Started: May 26 2003, 15:14 ET, Last post: May 27 2003, 15:11 ET)
Idea for locating the holes will it work
Take down latch pin hole size  (Started: May 26 2003, 10:39 ET, Last post: May 26 2003, 19:28 ET)
How big is too big?
Buffers Heavey or light  (Started: May 20 2003, 21:43 ET, Last post: May 25 2003, 13:43 ET)
What's the difference and Why/
How good is JB weld  (Started: May 20 2003, 22:55 ET, Last post: May 25 2003, 09:52 ET)
Anyone using the Super Jig have this Problem?  (Started: May 12 2003, 20:57 ET, Last post: May 25 2003, 00:41 ET)
5.56 Chamber  (Started: May 18 2003, 19:41 ET, Last post: May 22 2003, 23:44 ET)
Mag release slot  (Started: May 21 2003, 12:06 ET, Last post: May 21 2003, 12:34 ET)
How deep?
AR-15 Setup Blocks for Sale!!!!  (Started: May 21 2003, 10:04 ET, Last post: May 21 2003, 10:04 ET)
Selling the last few left
Affordable AR-15  (Started: May 18 2003, 21:54 ET, Last post: May 20 2003, 19:32 ET)
what parts to use...
Detachable tactical Sight....  (Started: Mar. 28 2003, 19:13 ET, Last post: May 19 2003, 21:19 ET)
What do you guys think??
Private Ryans Blind Hole  (Started: May 8 2003, 15:37 ET, Last post: May 16 2003, 19:38 ET)
5/32 hole
PvtRyans magwell layout  (Started: May 14 2003, 17:39 ET, Last post: May 15 2003, 00:05 ET)
Location of the 8 holes
Modification of rear detent hole  (Started: May 12 2003, 02:01 ET, Last post: May 13 2003, 13:21 ET)
Never lose detent springs again
AR-10 Barrel  (Started: Apr. 29 2003, 16:22 ET, Last post: May 13 2003, 09:54 ET)
308 Barrel Ext
HELP! Need a Stainless Steel A-2 upper receiver  (Started: May 12 2003, 00:31 ET, Last post: May 12 2003, 00:31 ET)
Mother's B-Day present....
Thank You  (Started: May 5 2003, 20:20 ET, Last post: May 6 2003, 19:15 ET)
My first Lower
Need Advice On Problem Lower  (Started: Apr. 29 2003, 22:40 ET, Last post: May 5 2003, 19:36 ET)
Diameter of AR pivot/takedown pins  (Started: May 3 2003, 20:43 ET, Last post: May 3 2003, 22:33 ET)
Could they be smaller....
A1 Detachable Handle  (Started: Apr. 19 2003, 22:26 ET, Last post: May 3 2003, 00:22 ET)
New Project
ar-15 pistol with permanately attached mag  (Started: Mar. 11 2003, 20:01 ET, Last post: May 1 2003, 20:40 ET)
AR-15 magwell machining  (Started: Apr. 28 2003, 14:30 ET, Last post: Apr. 30 2003, 20:45 ET)
Can't find any discussions
Brownell's ambi safety, RRA 2 stage trigger  (Started: Apr. 23 2003, 22:34 ET, Last post: Apr. 25 2003, 19:55 ET)
Both the safeties had too narrow
RRA 1:12 Varmint Upper  (Started: Apr. 23 2003, 09:43 ET, Last post: Apr. 24 2003, 10:35 ET)
Who makes the modified ar 180 style upper seen  (Started: Apr. 23 2003, 09:19 ET, Last post: Apr. 23 2003, 09:19 ET)
Forgings with mag cut  (Started: Apr. 21 2003, 12:34 ET, Last post: Apr. 21 2003, 12:34 ET)
see trading post, thanks
Pvt. Ryan's 3X5 Cards?  (Started: Apr. 16 2003, 10:00 ET, Last post: Apr. 17 2003, 17:24 ET)
Please point me in the right direction!
Ar-15 lower blueprints  (Started: Apr. 16 2003, 19:01 ET, Last post: Apr. 17 2003, 13:41 ET)
80% FORGED lowers via tannershop/NOC  (Started: Apr. 15 2003, 16:28 ET, Last post: Apr. 15 2003, 21:49 ET)
RRA 2 stage wouldn't let the pc rapidfire  (Started: Apr. 12 2003, 08:34 ET, Last post: Apr. 12 2003, 08:34 ET)
I described what it was and wasn't doing
Scratchbuilt ar15 rxvr blueprints ...  (Started: Mar. 14 2003, 13:39 ET, Last post: Apr. 9 2003, 15:09 ET)
last ones done!
From 0% to 20% in a few evenings  (Started: Mar. 27 2003, 01:35 ET, Last post: Apr. 9 2003, 11:30 ET)
starting a 0% lower
machined stainless lower?  (Started: Apr. 8 2003, 21:43 ET, Last post: Apr. 9 2003, 09:25 ET)
A3 Detachable Handle  (Started: Mar. 13 2003, 22:25 ET, Last post: Apr. 8 2003, 14:32 ET)
Project Update
First AR  (Started: Mar. 17 2003, 22:08 ET, Last post: Apr. 6 2003, 09:56 ET)
weird dimensions  (Started: Apr. 1 2003, 05:12 ET, Last post: Apr. 4 2003, 08:57 ET)
jpg in file area appears incorrect
Upper THread for Barrel Ext?  (Started: Apr. 3 2003, 15:32 ET, Last post: Apr. 4 2003, 08:05 ET)
scratchbuilt ar15 rxvr - updated 2 prints  (Started: Mar. 24 2003, 14:16 ET, Last post: Mar. 29 2003, 03:05 ET)
update due to missing dimensions ...
locating pin holes in AR lower  (Started: Feb. 24 2003, 13:21 ET, Last post: Mar. 24 2003, 00:15 ET)
It seems to me to be a bit
Injection Molded Lowers  (Started: Mar. 16 2003, 23:54 ET, Last post: Mar. 22 2003, 21:38 ET)
AR Lower
Locating the top plane  (Started: Mar. 16 2003, 13:28 ET, Last post: Mar. 17 2003, 19:00 ET)
AR-15 Assembly Question  (Started: Mar. 14 2003, 23:09 ET, Last post: Mar. 17 2003, 01:53 ET)
what is a brand new AR striped lower worth ?  (Started: Feb. 15 2003, 01:12 ET, Last post: Mar. 15 2003, 19:22 ET)
AR striped lower
Have you guys ever thought about this?  (Started: Mar. 7 2003, 17:58 ET, Last post: Mar. 14 2003, 11:07 ET)
A1 Upper Receiver  (Started: Mar. 4 2003, 17:57 ET, Last post: Mar. 14 2003, 00:33 ET)
I'm looking for...
Milling carrier for a reciprocating handle  (Started: Feb. 20 2003, 10:47 ET, Last post: Mar. 9 2003, 17:18 ET)
like an M1A, Garand or AK
AR-15 Setup Blocks  (Started: Jan. 11 2003, 21:57 ET, Last post: Mar. 6 2003, 22:07 ET)
For Sale
80% steel lowers ???  (Started: Feb. 24 2003, 23:44 ET, Last post: Mar. 3 2003, 23:17 ET)
AR gas block  (Started: Feb. 20 2003, 03:50 ET, Last post: Feb. 23 2003, 10:35 ET)
Need help with gas block
Hesse plastic upper  (Started: Feb. 13 2003, 16:28 ET, Last post: Feb. 20 2003, 00:33 ET)
arrived today!
0.438" "choke" and selector detent  (Started: Feb. 17 2003, 11:00 ET, Last post: Feb. 17 2003, 17:01 ET)
Question for gurus
AR Upper  (Started: Feb. 12 2003, 17:37 ET, Last post: Feb. 14 2003, 01:14 ET)
Machining
If had an appropriate mold, could make the  (Started: Jan. 27 2003, 23:51 ET, Last post: Feb. 13 2003, 13:09 ET)
lower out of Acraglas gel, glass "flock'
SP1 uppers for sale  (Started: Jan. 15 2003, 13:44 ET, Last post: Feb. 13 2003, 10:48 ET)
Pistol buffer question  (Started: Feb. 9 2003, 10:59 ET, Last post: Feb. 13 2003, 10:30 ET)
legal or not?
Need Help machining deminsions  (Started: Feb. 5 2003, 16:10 ET, Last post: Feb. 11 2003, 11:28 ET)
What are the depths?
Sources Questions  (Started: Feb. 8 2003, 06:39 ET, Last post: Feb. 10 2003, 15:33 ET)
AR Smithing information and vendor info
Sources for 80% AR-15 lowers  (Started: Feb. 9 2003, 12:12 ET, Last post: Feb. 9 2003, 15:51 ET)
Buffer tube hole  (Started: Feb. 8 2003, 07:53 ET, Last post: Feb. 8 2003, 12:54 ET)
Epoxy lowers ??  (Started: Jun. 13 2002, 18:10 ET, Last post: Feb. 8 2003, 10:50 ET)
Milling an AR15 A1 upper  (Started: Jan. 21 2003, 21:47 ET, Last post: Feb. 7 2003, 02:02 ET)
Po' mans flat top
Speer #13, 14" TC 55 grs, 3000 fps, AA2520  (Started: Feb. 1 2003, 11:24 ET, Last post: Feb. 5 2003, 18:53 ET)
powder, 27 grs. That powder shows a loss
3 x 5 cards, JB-Weld and Other Cheats  (Started: Jan. 28 2003, 03:30 ET, Last post: Feb. 3 2003, 14:34 ET)
Newbie Requests Assistance!
0% forgings?  (Started: Jan. 31 2003, 00:46 ET, Last post: Feb. 3 2003, 12:45 ET)
SGTFREEDOM LOWERS & OSI DRILL JIG  (Started: Feb. 1 2003, 12:45 ET, Last post: Feb. 1 2003, 21:58 ET)
WARNING-WARNING-WARNING
next years project  (Started: Jan. 29 2003, 21:02 ET, Last post: Feb. 1 2003, 17:52 ET)
what pieces
I need your knowledgeable advice  (Started: Jan. 30 2003, 15:38 ET, Last post: Jan. 30 2003, 19:03 ET)
building a M4A3
AR15 Flattop Upper Blueprint  (Started: Jan. 26 2003, 18:06 ET, Last post: Jan. 29 2003, 08:19 ET)
Uploaded to the library
AR15 Lower Material  (Started: Jan. 25 2003, 07:59 ET, Last post: Jan. 28 2003, 20:22 ET)
What do you think?
Making AR .22 conversions work.  (Started: Jan. 18 2003, 17:18 ET, Last post: Jan. 28 2003, 15:37 ET)
Most of the time, you will find that the
Kevlar Upper?  (Started: Jan. 25 2003, 19:44 ET, Last post: Jan. 28 2003, 08:05 ET)
Finishing 80% AR lower w/o other parts  (Started: Jan. 7 2003, 10:29 ET, Last post: Jan. 27 2003, 23:50 ET)
Finishing 80% AR lower w/o other parts
AR15 fire control pins  (Started: Jan. 23 2003, 21:52 ET, Last post: Jan. 26 2003, 13:04 ET)
not tight tolerances
Deciphering the AR15 lower blueprint  (Started: Jan. 25 2003, 08:02 ET, Last post: Jan. 26 2003, 01:52 ET)
question about blueprint
Buffer tap?  (Started: Jan. 22 2003, 23:49 ET, Last post: Jan. 24 2003, 15:59 ET)
Got mine, too big
Tumbling an 80% casting  (Started: Jan. 22 2003, 18:25 ET, Last post: Jan. 24 2003, 13:22 ET)
question about manufacturing billet lower  (Started: Jan. 24 2003, 02:27 ET, Last post: Jan. 24 2003, 03:04 ET)
Making Billet Uppers.  (Started: Jan. 23 2003, 00:32 ET, Last post: Jan. 23 2003, 11:30 ET)
Something different.
Making AR15 Barrels?  (Started: Jan. 19 2003, 17:52 ET, Last post: Jan. 22 2003, 19:29 ET)
Threading, chambering etc?
What set of prints should I be using?  (Started: Jan. 21 2003, 00:23 ET, Last post: Jan. 21 2003, 19:53 ET)
Now that William is gone...0% forging project  (Started: Jan. 19 2003, 14:00 ET, Last post: Jan. 20 2003, 15:36 ET)
Where to get Tools?
AR15 7.62X39 Pistol Project  (Started: Jan. 18 2003, 13:52 ET, Last post: Jan. 20 2003, 09:38 ET)
Advice needed on approach
ar-10 forgings and prints  (Started: Jan. 17 2003, 12:15 ET, Last post: Jan. 18 2003, 11:42 ET)
new guy with a ?  (Started: Jan. 15 2003, 22:48 ET, Last post: Jan. 17 2003, 15:51 ET)
sheet metal lower
Bolt Carrier Convertor  (Started: Jan. 10 2003, 13:06 ET, Last post: Jan. 14 2003, 17:41 ET)
Anyone have prints?
Scratch build AR-15 lower receiver  (Started: Jan. 4 2003, 18:27 ET, Last post: Jan. 7 2003, 23:22 ET)
Ciener .22 won't cock Jard hammer.  (Started: Dec. 19 2002, 11:27 ET, Last post: Jan. 6 2003, 15:31 ET)
Got the single stage, drop in trigger
WINNERS of the SGT FREEDOM.COM CONTEST  (Started: Dec. 23 2002, 03:43 ET, Last post: Jan. 4 2003, 00:45 ET)
Thanks to all who participated
Where to get JP Enterprise trigger parts?  (Started: Dec. 27 2002, 11:57 ET, Last post: Dec. 29 2002, 18:36 ET)
M-16 Blueprints...  (Started: Dec. 21 2002, 01:24 ET, Last post: Dec. 28 2002, 10:56 ET)
Does anybody have an original?
alignment of buffer tube hole  (Started: Nov. 23 2002, 15:19 ET, Last post: Dec. 27 2002, 18:12 ET)
off-centered :o(
want CONTEST FOR RODERUS FORUM  (Started: Dec. 9 2002, 00:31 ET, Last post: Dec. 22 2002, 17:34 ET)
Win free lower casting, M16 TM, & print
? for the Tannery  (Started: Dec. 21 2002, 22:58 ET, Last post: Dec. 22 2002, 13:43 ET)
AR-15 buffer question (long)  (Started: Dec. 20 2002, 20:43 ET, Last post: Dec. 20 2002, 22:54 ET)
A1 0% Forging Source...  (Started: Dec. 16 2002, 16:32 ET, Last post: Dec. 17 2002, 10:59 ET)
Post Ban M4  (Started: Nov. 29 2002, 18:35 ET, Last post: Dec. 16 2002, 21:41 ET)
Fixing collapsing stocks
2 more scratchbuilt ar15 rxvr prints available  (Started: Dec. 16 2002, 11:13 ET, Last post: Dec. 16 2002, 13:35 ET)
45ACP AR15 Upper?  (Started: Dec. 11 2002, 23:07 ET, Last post: Dec. 12 2002, 11:46 ET)
Is there such a thing
Jig Rental?  (Started: Dec. 11 2002, 19:52 ET, Last post: Dec. 11 2002, 20:40 ET)
For William (Tanneryshop)
hope im wrong anyone from kts first bbq  (Started: Dec. 8 2002, 19:51 ET, Last post: Dec. 9 2002, 09:02 ET)
please respond
AR gas pressure,  (Started: Dec. 7 2002, 15:44 ET, Last post: Dec. 8 2002, 08:01 ET)
What does it take?>?>
for you guys who've made a billet lower...  (Started: Nov. 22 2002, 18:00 ET, Last post: Dec. 8 2002, 06:48 ET)
Cnc codes for ar-15 lower  (Started: Apr. 23 2002, 11:14 ET, Last post: Dec. 8 2002, 01:58 ET)
0% forging source  (Started: Dec. 4 2002, 14:17 ET, Last post: Dec. 7 2002, 19:46 ET)
3D ACAD solid model lower  (Started: Dec. 5 2002, 03:45 ET, Last post: Dec. 5 2002, 03:45 ET)
casting bubbles?  (Started: Dec. 3 2002, 12:13 ET, Last post: Dec. 4 2002, 09:28 ET)
New source for 80% AR15 Lower Castings?  (Started: Nov. 23 2002, 20:46 ET, Last post: Dec. 1 2002, 12:31 ET)
Anybody heard of this outfit?
Gas tube hole size  (Started: Nov. 29 2002, 13:35 ET, Last post: Nov. 29 2002, 13:35 ET)
Whats best?
Look what I just did.  (Started: Nov. 24 2002, 14:13 ET, Last post: Nov. 28 2002, 12:26 ET)
Takedown hole waaaay off
****PRODUCT RETURNS ****  (Started: Nov. 24 2002, 17:37 ET, Last post: Nov. 24 2002, 17:37 ET)
AR15, STUFF
Muzzle threads  (Started: Nov. 21 2002, 22:57 ET, Last post: Nov. 22 2002, 18:20 ET)
Absolute zero % ar lower, progress photo's  (Started: Aug. 14 2002, 05:47 ET, Last post: Nov. 21 2002, 21:14 ET)
Billet ar lower from scratch on mini mil
Belt Fed AR Upper?  (Started: Nov. 6 2002, 22:11 ET, Last post: Nov. 20 2002, 20:45 ET)
Belt Fed AR Upper?
anybody done a 9mm  (Started: Nov. 13 2002, 04:33 ET, Last post: Nov. 20 2002, 20:26 ET)
need advice
Stupid Question needs an answer.., please  (Started: Nov. 19 2002, 20:06 ET, Last post: Nov. 19 2002, 20:29 ET)
New to milling, Reccomendations please  (Started: Oct. 21 2002, 18:36 ET, Last post: Nov. 18 2002, 18:10 ET)
M16s In Action  (Started: Nov. 18 2002, 16:57 ET, Last post: Nov. 18 2002, 16:57 ET)
Cool M16 Photos used by Seals
What is the Internal Mechanism of AR180's  (Started: Nov. 2 2002, 12:04 ET, Last post: Nov. 18 2002, 15:28 ET)
80% AR Lower completed with Water-Pik....  (Started: Sep. 21 2002, 00:07 ET, Last post: Nov. 11 2002, 00:00 ET)
My first 80% lower in progress  (Started: Oct. 30 2002, 02:14 ET, Last post: Nov. 6 2002, 22:31 ET)
so far, so good
AR lower  (Started: Oct. 27 2002, 18:16 ET, Last post: Nov. 6 2002, 20:11 ET)
80% complete lower assistance needed
80% lower castings  (Started: Oct. 31 2002, 20:33 ET, Last post: Nov. 6 2002, 10:58 ET)
Receiver/barrel refinishing  (Started: Nov. 3 2002, 14:00 ET, Last post: Nov. 3 2002, 17:59 ET)
Mini lathe steup  (Started: Oct. 28 2002, 02:15 ET, Last post: Oct. 31 2002, 13:24 ET)
Suggestions?
Bushings & Set Screws  (Started: Oct. 29 2002, 01:15 ET, Last post: Oct. 29 2002, 03:22 ET)
2 Quick questions
Help removing taper pins  (Started: Oct. 20 2002, 19:46 ET, Last post: Oct. 29 2002, 01:24 ET)
HELP!!!
Where is the rest of it?  (Started: Oct. 28 2002, 12:13 ET, Last post: Oct. 29 2002, 01:00 ET)
Arbys 0% instructions
Milling jig  (Started: Oct. 25 2002, 13:55 ET, Last post: Oct. 27 2002, 20:04 ET)
Safe and secure
AR15 Cleaning?  (Started: Oct. 15 2002, 20:37 ET, Last post: Oct. 27 2002, 16:27 ET)
Looking for product tips!!
Ar lower indexing  (Started: Aug. 27 2002, 04:46 ET, Last post: Oct. 26 2002, 07:18 ET)
Some pics for indexing your lower
Scratchbuilt ar15 rxvr blueprints ready ...  (Started: Oct. 23 2002, 11:55 ET, Last post: Oct. 24 2002, 09:46 ET)
first 7 of 11 dwgs available
Cheep AR barrel ?  (Started: Oct. 19 2002, 22:27 ET, Last post: Oct. 21 2002, 18:04 ET)
Anyone buy from Northridge International
what reamer and tap sizes?  (Started: Oct. 15 2002, 13:17 ET, Last post: Oct. 16 2002, 12:26 ET)
to do an AR
first one completed!  (Started: Oct. 13 2002, 11:37 ET, Last post: Oct. 14 2002, 01:14 ET)
this was even more fun than shooting it;
What is needed for an upper?  (Started: Oct. 12 2002, 12:22 ET, Last post: Oct. 13 2002, 12:13 ET)
Got my 80% AR lowers in  (Started: Oct. 11 2002, 12:09 ET, Last post: Oct. 11 2002, 12:09 ET)
thanks William!
Mini mill shipped, 0% forging trembling with fear  (Started: Aug. 29 2002, 23:15 ET, Last post: Oct. 10 2002, 23:24 ET)
AR15 / M16 Shorty.  (Started: Sep. 18 2002, 06:00 ET, Last post: Sep. 30 2002, 23:22 ET)
how did they do it?
Drilling jigs  (Started: Sep. 26 2002, 22:43 ET, Last post: Sep. 30 2002, 01:27 ET)
Why not make your own?
this weekend's progress  (Started: Sep. 15 2002, 20:08 ET, Last post: Sep. 29 2002, 20:45 ET)
haven't destroyed it yet!
Ok, any hints for building...without a jig?  (Started: Sep. 27 2002, 23:36 ET, Last post: Sep. 28 2002, 06:53 ET)
AR-Tutorial  (Started: Sep. 15 2002, 15:58 ET, Last post: Sep. 24 2002, 22:59 ET)
Where Can I Find it???
Front Sight Block Taper Pins?  (Started: Sep. 20 2002, 22:41 ET, Last post: Sep. 21 2002, 08:18 ET)
Anybody have the specs?
AR Gas tube.????  (Started: Sep. 18 2002, 06:05 ET, Last post: Sep. 20 2002, 21:33 ET)
Mag Well  (Started: Sep. 18 2002, 19:46 ET, Last post: Sep. 18 2002, 22:13 ET)
Sanding Inside Of magwell
tooling required for AR15 build  (Started: Sep. 17 2002, 12:28 ET, Last post: Sep. 17 2002, 20:21 ET)
where is PVt Ryan's list
AR-15 How To Buld The Hole Thing  (Started: Sep. 15 2002, 05:10 ET, Last post: Sep. 15 2002, 14:08 ET)
Build It
9mm magwell block  (Started: Aug. 18 2002, 23:57 ET, Last post: Sep. 12 2002, 12:24 ET)
Mill your own?
Missing Dimensions??  (Started: Sep. 10 2002, 08:44 ET, Last post: Sep. 12 2002, 08:23 ET)
setup cards
Need source for 0% AR lower forgings  (Started: Sep. 9 2002, 10:34 ET, Last post: Sep. 9 2002, 15:52 ET)
Hammer pin hole  (Started: Sep. 5 2002, 21:40 ET, Last post: Sep. 7 2002, 10:31 ET)
just a little loose
Numbering lowers?  (Started: Sep. 2 2002, 10:24 ET, Last post: Sep. 2 2002, 14:12 ET)
adding ser# to finished lowers
Anyone here making 80% frames?  (Started: Sep. 1 2002, 16:47 ET, Last post: Sep. 2 2002, 12:22 ET)
just an idea
Do I have a cast lower  (Started: Aug. 31 2002, 08:19 ET, Last post: Sep. 1 2002, 19:49 ET)
Where to start
First lower attempt, pivot pin hole too big  (Started: Aug. 30 2002, 17:39 ET, Last post: Sep. 1 2002, 16:03 ET)
No idea what i did wrong, but i did.....
AR15 upper to lower fitting  (Started: Aug. 31 2002, 00:57 ET, Last post: Aug. 31 2002, 11:15 ET)
what lines up straight?
Anodizing tannery ar lower  (Started: Aug. 24 2002, 23:26 ET, Last post: Aug. 29 2002, 00:43 ET)
Can it be done?
Socom diamond series  (Started: Aug. 24 2002, 10:13 ET, Last post: Aug. 26 2002, 21:18 ET)
They finally mfg an upper.
Mag well pics  (Started: Aug. 25 2002, 13:28 ET, Last post: Aug. 25 2002, 22:51 ET)
What's happening?
Ar mag well  (Started: Aug. 24 2002, 03:21 ET, Last post: Aug. 25 2002, 09:34 ET)
Location of 0,0
Indexing from boss??  (Started: Aug. 25 2002, 03:06 ET, Last post: Aug. 25 2002, 09:25 ET)
Single-shot ar  (Started: Jun. 18 2002, 14:55 ET, Last post: Aug. 25 2002, 05:46 ET)
Ferret 50bmg
Help! need a receiver dimension!  (Started: Aug. 14 2002, 20:42 ET, Last post: Aug. 21 2002, 23:33 ET)
Large-hole lower
Time to get started on my first lower  (Started: Aug. 15 2002, 19:24 ET, Last post: Aug. 17 2002, 19:45 ET)
Fear of mangling it
Front sight post ? ? ? ? ?  (Started: Aug. 16 2002, 16:24 ET, Last post: Aug. 17 2002, 11:25 ET)
Anybody know the thread pitch?
Moving recoil spring  (Started: Jun. 15 2002, 20:36 ET, Last post: Aug. 17 2002, 00:13 ET)
Moving recoil spring above barrel
Buffer tube dimensions  (Started: Jul. 3 2002, 03:44 ET, Last post: Aug. 15 2002, 03:18 ET)
Just finished my 4th 0% lower  (Started: Aug. 11 2002, 12:38 ET, Last post: Aug. 14 2002, 20:52 ET)
I'm having a great time.
Tip for holding buffer tap  (Started: Aug. 2 2002, 21:32 ET, Last post: Aug. 14 2002, 11:54 ET)
Lessons learned??  (Started: Aug. 13 2002, 20:51 ET, Last post: Aug. 14 2002, 00:37 ET)
Mag well finishing ?  (Started: Aug. 13 2002, 21:02 ET, Last post: Aug. 14 2002, 00:22 ET)
Tricks of the trade!  (Started: Aug. 8 2002, 02:56 ET, Last post: Aug. 8 2002, 13:18 ET)
**top secret**
Pivot pin detent hole depth??  (Started: Aug. 2 2002, 12:14 ET, Last post: Aug. 2 2002, 21:18 ET)
Osi jig  (Started: Jun. 7 2002, 11:22 ET, Last post: Aug. 2 2002, 09:35 ET)
Rent it or not?
How good are hesse lowers?  (Started: Jul. 22 2002, 20:40 ET, Last post: Aug. 2 2002, 07:23 ET)
Not very.......
Variation to pryan's setup #2  (Started: Jun. 30 2002, 19:54 ET, Last post: Jul. 19 2002, 15:11 ET)
Request comments on clamping forging
Roll marking???  (Started: Jul. 16 2002, 05:54 ET, Last post: Jul. 18 2002, 03:41 ET)
Determining the -[c]- plane  (Started: Jun. 17 2002, 18:55 ET, Last post: Jul. 16 2002, 23:37 ET)
Need help reading blueprints
0% forging without a mill  (Started: Jul. 14 2002, 01:34 ET, Last post: Jul. 14 2002, 21:40 ET)
All i can say is wow
Dammit!!!!!!!!!!!  (Started: Jul. 12 2002, 11:29 ET, Last post: Jul. 14 2002, 12:56 ET)
0% forgings piss me off
In progress pics of my california fixed mag ar-15  (Started: May 24 2002, 02:09 ET, Last post: Jul. 8 2002, 23:23 ET)
New guy questions  (Started: Jul. 6 2002, 17:51 ET, Last post: Jul. 8 2002, 07:42 ET)
Getting started machining the forging
Buffer tube end mill  (Started: Jul. 6 2002, 21:13 ET, Last post: Jul. 7 2002, 23:06 ET)
Where to get it?
Bolt carrier  (Started: Jul. 2 2002, 08:11 ET, Last post: Jul. 7 2002, 11:28 ET)
Anyone make one of these yet?
Receiver dimensions  (Started: Jul. 4 2002, 14:09 ET, Last post: Jul. 6 2002, 09:57 ET)
?
Arby please save me!!!!!  (Started: Jul. 1 2002, 20:28 ET, Last post: Jul. 3 2002, 00:30 ET)
Ar forging question
Rcgw group buy opinions?  (Started: Jul. 2 2002, 03:47 ET, Last post: Jul. 2 2002, 23:45 ET)
Anyone got one yet?
Ar 15 mag well  (Started: Jul. 1 2002, 20:34 ET, Last post: Jul. 2 2002, 19:29 ET)
Two unrelated forging problems  (Started: Jun. 30 2002, 01:20 ET, Last post: Jul. 1 2002, 06:45 ET)
One major, one minor
Spacestock project  (Started: Jun. 21 2002, 10:40 ET, Last post: Jun. 30 2002, 23:08 ET)
Any interest in building one of these?
Dummy lower for trigger work  (Started: Jun. 24 2002, 01:21 ET, Last post: Jun. 26 2002, 12:31 ET)
Is anyone up to the task?
Cleaning up the deck with smaller endmills?  (Started: Jun. 22 2002, 08:37 ET, Last post: Jun. 25 2002, 20:54 ET)
Since i dont have my big ones in yet..
Looking for "mujahadeen ar" pics  (Started: Jun. 12 2002, 08:32 ET, Last post: Jun. 25 2002, 16:17 ET)
Originally posted on ar15.com
Dims for inside magwell  (Started: Jun. 24 2002, 18:58 ET, Last post: Jun. 25 2002, 01:36 ET)
"over/down" method
Finally got a good look at a fab10  (Started: Jun. 8 2002, 22:43 ET, Last post: Jun. 20 2002, 19:33 ET)
Making parallel plates like pvtryan's  (Started: Jun. 16 2002, 07:57 ET, Last post: Jun. 20 2002, 15:14 ET)
Need some advice
Scratchbuilt ar15 lower pics  (Started: Jun. 11 2002, 12:37 ET, Last post: Jun. 19 2002, 15:41 ET)
(a different approach to the problem)
Earn $80 for u'r finished 0% lower- howto:  (Started: Apr. 27 2002, 19:28 ET, Last post: Jun. 17 2002, 22:38 ET)
Ca wants to pay residents $100 for aw
Stripped lowers  (Started: Jun. 13 2002, 16:35 ET, Last post: Jun. 16 2002, 11:41 ET)
Good brand and other questions
Arby: vise question  (Started: Jun. 6 2002, 20:50 ET, Last post: Jun. 7 2002, 07:50 ET)
Foia request for ardec doc. set 9349000  (Started: May 31 2002, 18:28 ET, Last post: Jun. 5 2002, 16:57 ET)
No because colt says so, not good enough
Damn i feel dumb  (Started: May 27 2002, 15:04 ET, Last post: May 30 2002, 21:53 ET)
Broke off a trigger guard nub
1 1/8" end mill and drill bit on sale at enco  (Started: May 27 2002, 19:08 ET, Last post: May 27 2002, 23:26 ET)
Q: re: source and dim. for flush fit 10 rnd. mag.  (Started: May 24 2002, 02:27 ET, Last post: May 26 2002, 01:12 ET)
Arby's build your own ar15 lower..  (Started: Apr. 29 2002, 20:54 ET, Last post: May 22 2002, 21:38 ET)
Article with text and pics in librarary
Ar15 calibre choices?  (Started: Apr. 21 2002, 06:59 ET, Last post: May 22 2002, 01:16 ET)
What can you build on an ar15?
Wish i could...  (Started: May 14 2002, 21:39 ET, Last post: May 19 2002, 01:16 ET)
More beefy lower
Lower dims  (Started: May 11 2002, 20:51 ET, Last post: May 18 2002, 22:50 ET)
Dimensions for lower holes
Edge finder  (Started: May 18 2002, 08:06 ET, Last post: May 18 2002, 22:49 ET)
How to......
"fixed" telescoping stocks  (Started: May 16 2002, 22:51 ET, Last post: May 17 2002, 13:14 ET)
What's the straight dope?
Ar-10 forgings?  (Started: Apr. 18 2002, 09:25 ET, Last post: May 7 2002, 09:34 ET)
Barrel modifications  (Started: Apr. 24 2002, 10:53 ET, Last post: Apr. 28 2002, 17:43 ET)
Turning down an hbar
Tools to finish 0% forging  (Started: Apr. 15 2002, 01:58 ET, Last post: Apr. 26 2002, 18:35 ET)
...at least what i use
Reading blueprints  (Started: Apr. 24 2002, 01:27 ET, Last post: Apr. 24 2002, 07:02 ET)
What do these damn symbols mean?@#$?
Muzzle stuff  (Started: Apr. 6 2002, 23:35 ET, Last post: Apr. 23 2002, 07:29 ET)
A2 UPPER SITE  (Started: Mar. 21 2002, 02:26 ET, Last post: Apr. 23 2002, 02:34 ET)
FIXING THE CANTED A2 REAR SITE
Tools for 80% lower  (Started: Apr. 16 2002, 11:52 ET, Last post: Apr. 19 2002, 14:09 ET)
What tools should we use?
Bushy M4  (Started: Mar. 21 2002, 18:56 ET, Last post: Apr. 18 2002, 07:41 ET)
Bushy goes Big Bang!
Ar trigger job  (Started: Mar. 27 2002, 18:16 ET, Last post: Apr. 18 2002, 07:20 ET)
Suggestions
Ace ltd arbt stock  (Started: Apr. 10 2002, 14:36 ET, Last post: Apr. 15 2002, 11:06 ET)
New "boom tube" stock looks pretty good.
36"x24" printout for sale  (Started: Mar. 30 2002, 01:18 ET, Last post: Apr. 7 2002, 23:06 ET)
In the trading post
Gunsmoke enterprises inc. in fla  (Started: Apr. 5 2002, 12:28 ET, Last post: Apr. 7 2002, 01:54 ET)
Anybody use them?
0% forgings  (Started: Apr. 6 2002, 06:08 ET, Last post: Apr. 6 2002, 09:07 ET)
Century ar-15 receivers  (Started: Mar. 25 2002, 14:16 ET, Last post: Apr. 4 2002, 01:38 ET)
March special
My first ar, what should i do?  (Started: Mar. 29 2002, 16:44 ET, Last post: Apr. 3 2002, 00:45 ET)
Hope this is the right forum.
Need a resident AR-15 Guru...  (Started: Mar. 22 2002, 00:09 ET, Last post: Mar. 22 2002, 00:36 ET)
anyone what to volunteer?