www.HomeGunsmith.com Archive
Archive Date: Apr. 13 2021, 04:00 ET
This is an archive! Click here to go to the live site.

Home > Main Forums > Gun and Stock Finishes
Mark lee's express blue  (Started: Oct. 23 2019, 17:49 ET, Last post: Jun. 4 2020, 20:00 ET)
Who does coatings near everett/marysville?  (Started: Jan. 30 2019, 15:02 ET, Last post: Jan. 30 2019, 15:02 ET)
Anyone here tried this stuff yet?  (Started: Jun. 12 2015, 02:20 ET, Last post: Aug. 5 2018, 13:07 ET)
Blue.
Starting a stock for my 6.5l  (Started: Sep. 30 2017, 21:13 ET, Last post: Jul. 2 2018, 11:06 ET)
Who knows about gun stock blanks  (Started: Sep. 9 2017, 17:55 ET, Last post: Oct. 1 2017, 03:45 ET)
Need education about buyers and sellers
Win pre 64  (Started: Jul. 20 2017, 17:40 ET, Last post: Jul. 21 2017, 17:09 ET)
Barrel touch up
Powder coating? yay or nay.  (Started: Nov. 10 2016, 16:57 ET, Last post: Nov. 12 2016, 07:43 ET)
Blasphemy
Parkerizing with pvc s  (Started: Sep. 7 2016, 08:33 ET, Last post: Sep. 21 2016, 09:45 ET)
Finish preparatoin
Tarn-x for rust bluing  (Started: Mar. 4 2016, 20:27 ET, Last post: Mar. 7 2016, 20:07 ET)
Rust bluing
Bluing  (Started: Nov. 7 2015, 18:30 ET, Last post: Nov. 28 2015, 23:08 ET)
Help with bluing
Restoring a rusty gun warning lots of pictures!  (Started: Jan. 7 2014, 18:37 ET, Last post: Mar. 23 2015, 14:45 ET)
Restoring a too far gone gun  (Started: Mar. 18 2015, 18:13 ET, Last post: Mar. 20 2015, 18:31 ET)
Parts refinished  (Started: Mar. 10 2015, 13:18 ET, Last post: Mar. 10 2015, 13:18 ET)
Bluing
Small parts  (Started: Feb. 7 2015, 22:55 ET, Last post: Feb. 12 2015, 13:39 ET)
Bluing
Oxynate 7  (Started: Jan. 18 2015, 22:48 ET, Last post: Jan. 19 2015, 00:52 ET)
Bluing
Molyresin vs gun kote  (Started: Aug. 22 2012, 14:12 ET, Last post: Sep. 4 2014, 21:30 ET)
Parkerized finish care  (Started: Aug. 25 2014, 16:56 ET, Last post: Aug. 25 2014, 19:25 ET)
Just a cleanup job on an old stevens  (Started: Jul. 26 2014, 22:34 ET, Last post: Aug. 4 2014, 13:14 ET)
Enfield i butchered  (Started: Jul. 26 2014, 22:45 ET, Last post: Jul. 28 2014, 13:34 ET)
Bluing
Removing cosmo from wood stocks  (Started: Jan. 11 2014, 03:44 ET, Last post: Jul. 10 2014, 19:06 ET)
Slow rust bluing  (Started: Jul. 3 2013, 16:57 ET, Last post: May 11 2014, 21:34 ET)
Using tarn-x
Stevens tip up stock  (Started: Mar. 18 2014, 18:17 ET, Last post: Mar. 20 2014, 11:19 ET)
Manganese park experiments  (Started: Mar. 4 2011, 16:47 ET, Last post: Feb. 3 2014, 00:35 ET)
Stripping nickel?  (Started: Jan. 18 2014, 11:54 ET, Last post: Jan. 23 2014, 18:01 ET)
Hot bluing recipes ?  (Started: Jan. 15 2014, 22:28 ET, Last post: Jan. 17 2014, 20:31 ET)
How to remove an oil finish?  (Started: Oct. 27 2013, 11:53 ET, Last post: Dec. 18 2013, 21:37 ET)
How to finish?  (Started: Dec. 10 2013, 21:46 ET, Last post: Dec. 13 2013, 20:01 ET)
Ar build
How to make steel blue?  (Started: Nov. 3 2013, 11:34 ET, Last post: Nov. 3 2013, 13:36 ET)
Antique look
Winrest stock finish  (Started: Jan. 4 2013, 23:31 ET, Last post: Sep. 24 2013, 10:47 ET)
Does it still exist?
Homemade wood stock build  (Started: Sep. 4 2013, 20:42 ET, Last post: Sep. 5 2013, 10:39 ET)
Metal finishing help  (Started: Sep. 3 2013, 16:19 ET, Last post: Sep. 4 2013, 00:22 ET)
Help setting up bluing, parkerizing, and
DuraHeat High Temp. Finish  (Started: Apr. 22 2004, 02:17 ET, Last post: Aug. 8 2013, 18:42 ET)
Parkerizing questions  (Started: Aug. 5 2013, 21:56 ET, Last post: Aug. 8 2013, 18:04 ET)
Rinse tank ?
Duracoat or aluma-hyde ii?  (Started: Feb. 20 2010, 12:05 ET, Last post: Jun. 15 2013, 08:49 ET)
Coating for 1911
Jeweling practice  (Started: Jun. 11 2013, 11:07 ET, Last post: Jun. 11 2013, 13:14 ET)
Experiments in slow rust bluing  (Started: May 22 2013, 19:08 ET, Last post: Jun. 11 2013, 10:48 ET)
Sanding off old varnish, paint, and crud,,,  (Started: May 20 2013, 13:54 ET, Last post: May 20 2013, 20:25 ET)
Parkerizing a p38  (Started: Apr. 10 2013, 22:05 ET, Last post: Apr. 11 2013, 21:48 ET)
Frame problems
Stippling a gunstock  (Started: Apr. 3 2013, 07:53 ET, Last post: Apr. 4 2013, 11:04 ET)
Ideas on a machine to stipple a gunstock
Coating plastic stocks  (Started: Feb. 26 2013, 18:11 ET, Last post: Mar. 8 2013, 14:10 ET)
Colored plywood laminated stocks  (Started: May 10 2012, 02:04 ET, Last post: Feb. 24 2013, 07:15 ET)
Where to get the plywood
Brass brazing and caustic blue  (Started: Feb. 6 2013, 08:33 ET, Last post: Feb. 7 2013, 10:32 ET)
Stripper adivce wanted  (Started: Jan. 19 2013, 00:32 ET, Last post: Jan. 21 2013, 21:48 ET)
Need to refinish some stocks
Hydo print services  (Started: Aug. 9 2012, 22:56 ET, Last post: Aug. 10 2012, 15:48 ET)
The 'best' finish?
Browning 22 take down  (Started: Aug. 4 2012, 17:51 ET, Last post: Aug. 4 2012, 17:51 ET)
How to shape a gun stock  (Started: Jul. 2 2012, 09:46 ET, Last post: Jul. 3 2012, 17:30 ET)
Looks useful
Electrochemical etching  (Started: Apr. 25 2012, 19:44 ET, Last post: Jul. 1 2012, 22:09 ET)
Who's tried this?
Mosin nagant custom bullpup  (Started: Jun. 30 2012, 20:28 ET, Last post: Jul. 1 2012, 21:56 ET)
For the bullpup lovers
Gemini gunstock carving duplicator  (Started: Mar. 26 2012, 21:27 ET, Last post: Jun. 30 2012, 07:55 ET)
Park tank on the cheap  (Started: Jun. 21 2012, 17:11 ET, Last post: Jun. 26 2012, 12:47 ET)
Homemade hot blue  (Started: Mar. 24 2012, 22:09 ET, Last post: Jun. 9 2012, 13:14 ET)
Heavy on pictures
Can a remington 700 go bullpup?  (Started: May 12 2012, 18:26 ET, Last post: Jun. 8 2012, 05:23 ET)
Butt stock covers, slip covers, and cheek rests  (Started: May 25 2012, 23:40 ET, Last post: May 26 2012, 09:33 ET)
Inspiration to make - leather
Robar firearms coatings  (Started: Apr. 4 2012, 21:54 ET, Last post: Apr. 5 2012, 13:16 ET)
Bellandcarlson stocks  (Started: Apr. 3 2012, 18:08 ET, Last post: Apr. 3 2012, 23:48 ET)
Camo finishes
Hot blue my way, step by step  (Started: Apr. 15 2007, 18:36 ET, Last post: Mar. 25 2012, 13:04 ET)
Wokin' a ruger
What media do you sandblast with  (Started: Mar. 20 2012, 23:00 ET, Last post: Mar. 22 2012, 14:17 ET)
Duracote  (Started: Mar. 16 2012, 19:49 ET, Last post: Mar. 18 2012, 23:56 ET)
Ordered bluing salts  (Started: Mar. 8 2012, 15:00 ET, Last post: Mar. 8 2012, 15:00 ET)
Parkerizing in copper tanks  (Started: Feb. 1 2012, 13:46 ET, Last post: Feb. 1 2012, 14:40 ET)
Will it work, ok?
Interestning stock finishing from poland  (Started: Jan. 29 2012, 21:13 ET, Last post: Jan. 30 2012, 15:19 ET)
Inlay  (Started: Jan. 19 2012, 11:14 ET, Last post: Jan. 19 2012, 11:14 ET)
How to
]electric parkerizing tank  (Started: Jan. 12 2012, 17:35 ET, Last post: Jan. 18 2012, 13:55 ET)
Heating elements
Forster gold inlay  (Started: Dec. 31 2011, 23:56 ET, Last post: Jan. 1 2012, 11:52 ET)
Anybody tried it?
Engraving tutorials, et al  (Started: Dec. 31 2011, 21:38 ET, Last post: Dec. 31 2011, 21:38 ET)
Ruined 2 stock blanks this week  (Started: Dec. 17 2011, 22:23 ET, Last post: Dec. 24 2011, 00:11 ET)
Lessons learned
Interesting bluing methods  (Started: Dec. 21 2011, 04:40 ET, Last post: Dec. 22 2011, 12:18 ET)
Scroll through all of the videos
Checkering  (Started: Dec. 19 2011, 13:50 ET, Last post: Dec. 20 2011, 15:08 ET)
My first attempts
Make your own adjustable stock  (Started: Dec. 19 2011, 18:03 ET, Last post: Dec. 20 2011, 14:50 ET)
Forearm placement  (Started: Dec. 30 2008, 11:10 ET, Last post: Dec. 10 2011, 00:53 ET)
Tight fit or relieved from the reciever
Stock finish help  (Started: Dec. 15 2009, 17:51 ET, Last post: Dec. 10 2011, 00:33 ET)
Stock finish help
Nearly finished  (Started: Dec. 4 2011, 21:45 ET, Last post: Dec. 5 2011, 22:14 ET)
Spring passivization  (Started: Nov. 26 2011, 16:12 ET, Last post: Nov. 27 2011, 12:25 ET)
What's the consensus?
Nitre bluing  (Started: Jan. 17 2009, 12:01 ET, Last post: Nov. 20 2011, 18:29 ET)
Rust brown with steam  (Started: Nov. 9 2011, 15:28 ET, Last post: Nov. 15 2011, 00:56 ET)
Has anyone done this
Houston texas engraver  (Started: Nov. 8 2011, 01:25 ET, Last post: Nov. 8 2011, 01:25 ET)
Engrave my sons gun...
Remove black parkerizing  (Started: Oct. 28 2011, 22:16 ET, Last post: Oct. 28 2011, 23:14 ET)
Identifying bluing?  (Started: Oct. 27 2011, 05:30 ET, Last post: Oct. 28 2011, 16:57 ET)
Pilkington's rust blue instructions  (Started: Jun. 2 2011, 10:31 ET, Last post: Oct. 28 2011, 03:18 ET)
Anyone have the booklet?
Benchrest rifle stock  (Started: Sep. 21 2011, 09:33 ET, Last post: Oct. 27 2011, 08:02 ET)
Any diy out there?
Film dip kits  (Started: Aug. 20 2011, 21:56 ET, Last post: Sep. 14 2011, 16:26 ET)
Usgi wood stock finishes  (Started: Aug. 22 2011, 20:31 ET, Last post: Aug. 22 2011, 20:31 ET)
Pirated from the cmp site
Polishing metal  (Started: Jun. 13 2011, 20:27 ET, Last post: Aug. 20 2011, 19:51 ET)
Making a pistol grip  (Started: Aug. 5 2011, 01:02 ET, Last post: Aug. 10 2011, 17:11 ET)
Vht epoxy finish  (Started: Jul. 14 2011, 22:46 ET, Last post: Jul. 20 2011, 22:29 ET)
Diy canvas micarta  (Started: Jul. 5 2011, 01:18 ET, Last post: Jul. 10 2011, 23:07 ET)
For rifle stock?
Checkering tutorial videos  (Started: Jul. 7 2011, 14:19 ET, Last post: Jul. 10 2011, 14:25 ET)
Oil finnish stock?  (Started: Jul. 2 2011, 06:08 ET, Last post: Jul. 5 2011, 23:35 ET)
How much duracote to do a mauser  (Started: Jun. 28 2011, 21:07 ET, Last post: Jul. 2 2011, 02:57 ET)
Dura coatng a mauser  (Started: Jun. 28 2011, 01:40 ET, Last post: Jun. 28 2011, 17:21 ET)
Color case hardening  (Started: Nov. 10 2010, 08:46 ET, Last post: Jun. 27 2011, 08:26 ET)
Black gloss finish on aluminum?  (Started: Jun. 13 2011, 07:42 ET, Last post: Jun. 13 2011, 23:11 ET)
Blacking stainless  (Started: Jun. 4 2011, 10:00 ET, Last post: Jun. 11 2011, 20:00 ET)
Pilkington's instructions  (Started: Jun. 4 2011, 10:07 ET, Last post: Jun. 4 2011, 10:24 ET)
I think i figured it out.
Bleaching stock - oxalic acid  (Started: Jun. 2 2011, 20:18 ET, Last post: Jun. 3 2011, 15:47 ET)
Oxalic acid and checkering  (Started: May 30 2011, 06:02 ET, Last post: May 31 2011, 15:01 ET)
Wow.  some inspirations for the gun engravers.  (Started: May 30 2011, 01:32 ET, Last post: May 31 2011, 13:03 ET)
Remove color after strip  (Started: May 29 2011, 20:05 ET, Last post: May 31 2011, 00:22 ET)
Interesting thread on carving a rifle stock.  (Started: May 27 2011, 18:39 ET, Last post: May 27 2011, 20:08 ET)
Not for the unskilled.
Refinish checkered stock  (Started: May 17 2011, 07:02 ET, Last post: May 24 2011, 15:25 ET)
Homemade rust bluing  (Started: May 22 2011, 03:01 ET, Last post: May 22 2011, 19:57 ET)
..the hard way...
Marlin 1894 stock refinish help?  (Started: Mar. 19 2011, 20:19 ET, Last post: May 22 2011, 07:08 ET)
What's out there to use
Example - how well home parkerizing can work  (Started: May 17 2011, 08:31 ET, Last post: May 22 2011, 04:19 ET)
Nice
Juniper stocks?  (Started: May 17 2011, 21:01 ET, Last post: May 18 2011, 18:14 ET)
Ebony forearm tip question  (Started: May 7 2011, 19:27 ET, Last post: May 7 2011, 23:49 ET)
Aluminum frames  (Started: Apr. 13 2011, 21:31 ET, Last post: May 1 2011, 16:12 ET)
Stippling practice  (Started: Mar. 27 2011, 11:17 ET, Last post: Apr. 17 2011, 10:00 ET)
Checkering  (Started: Apr. 3 2011, 23:20 ET, Last post: Apr. 6 2011, 21:54 ET)
Stocks
Hardcoat anodizing  (Started: Jan. 30 2011, 23:37 ET, Last post: Apr. 2 2011, 23:59 ET)
Duplicators  (Started: Mar. 26 2011, 20:06 ET, Last post: Mar. 26 2011, 21:32 ET)
Evapo-rust  (Started: Feb. 26 2011, 21:52 ET, Last post: Mar. 3 2011, 21:57 ET)
..
Parkerizing-- zinc phosphate  (Started: Sep. 27 2009, 11:28 ET, Last post: Feb. 28 2011, 14:52 ET)
Good results
Anodizing dye for a brass color on aluminum..  (Started: Dec. 20 2010, 00:03 ET, Last post: Jan. 30 2011, 23:50 ET)
Looking for suggestions on dye...
Laser engraving  (Started: Jan. 28 2011, 12:18 ET, Last post: Jan. 28 2011, 18:22 ET)
Just got laser engraver
Amazing discovery!!!  (Started: Aug. 22 2009, 00:48 ET, Last post: Jan. 13 2011, 17:27 ET)
First of the 21st century
Protecting checkering  (Started: Jan. 8 2011, 15:55 ET, Last post: Jan. 9 2011, 12:19 ET)
What is the best solution to rebluing that stain?  (Started: Jan. 9 2011, 09:42 ET, Last post: Jan. 9 2011, 09:43 ET)
Parkerize winchester 94?  (Started: Dec. 6 2010, 13:00 ET, Last post: Dec. 6 2010, 19:21 ET)
Can a winchester 94 be parkerized?
Diy nickel plating  (Started: Nov. 30 2010, 21:00 ET, Last post: Dec. 4 2010, 16:02 ET)
Parkerizing questions  (Started: Oct. 11 2010, 12:56 ET, Last post: Oct. 26 2010, 08:06 ET)
Metal eroding/loss of dimension
Bell and carlson screwup  (Started: Jul. 19 2010, 21:30 ET, Last post: Oct. 14 2010, 07:30 ET)
Unusable stock for p-14-17
Rust bluing process  (Started: Sep. 6 2010, 12:05 ET, Last post: Sep. 30 2010, 21:33 ET)
Removing nickle plate  (Started: Sep. 18 2010, 19:19 ET, Last post: Sep. 21 2010, 11:41 ET)
Duracote questions  (Started: Sep. 9 2010, 22:22 ET, Last post: Sep. 10 2010, 17:09 ET)
Garnet blast media  (Started: Sep. 4 2010, 01:45 ET, Last post: Sep. 10 2010, 01:01 ET)
Stock inspiration  (Started: Aug. 20 2010, 00:10 ET, Last post: Aug. 26 2010, 01:09 ET)
Let's just say it's different
Cold blueing?  (Started: Sep. 22 2008, 07:57 ET, Last post: Aug. 22 2010, 17:54 ET)
Help
Cold bluing tutorial  (Started: Jul. 18 2010, 03:05 ET, Last post: Aug. 22 2010, 16:54 ET)
Home anodizing - again  (Started: Aug. 12 2010, 13:33 ET, Last post: Aug. 14 2010, 18:30 ET)
Risk it?
Ceramic coating?  (Started: Oct. 27 2008, 22:06 ET, Last post: Aug. 11 2010, 20:41 ET)
Need opinions on "rugged gun blue"  (Started: Aug. 9 2010, 01:04 ET, Last post: Aug. 11 2010, 19:59 ET)
How not to parkerize :):):)  (Started: Jul. 27 2010, 16:05 ET, Last post: Aug. 5 2010, 08:06 ET)
Sandpaper??????????  (Started: Aug. 2 2010, 12:49 ET, Last post: Aug. 2 2010, 19:45 ET)
Refinishing antique guns.  (Started: Jun. 24 2010, 22:31 ET, Last post: Jun. 26 2010, 22:06 ET)
Suggestion and methods.
Spot parkerizing  (Started: Jun. 4 2010, 14:49 ET, Last post: Jun. 11 2010, 15:46 ET)
It works - kinda
Anodizing link  (Started: May 8 2010, 15:40 ET, Last post: May 9 2010, 20:00 ET)
Homebrew anodizing
Desert eagle - how to refinish small parts?  (Started: Apr. 29 2010, 09:20 ET, Last post: May 8 2010, 15:20 ET)
Gold hard anodized or other?
Question for gun painters out there  (Started: May 4 2010, 23:23 ET, Last post: May 8 2010, 12:57 ET)
Home brew blue, attempt 2.  (Started: May 2 2010, 22:23 ET, Last post: May 3 2010, 19:07 ET)
How to paint your rifle digital camouflage  (Started: May 1 2010, 01:46 ET, Last post: May 3 2010, 15:33 ET)
I just know some of you want to
Bead blasting stainless  (Started: Apr. 4 2010, 20:33 ET, Last post: Apr. 21 2010, 08:01 ET)
Electroless nickel  (Started: Sep. 12 2007, 03:16 ET, Last post: Apr. 19 2010, 14:08 ET)
Howcome no one does it?
!question about removing water stains  (Started: Apr. 6 2010, 21:25 ET, Last post: Apr. 6 2010, 22:28 ET)
Rubberized stocks, grips, etc.  (Started: Mar. 15 2010, 15:40 ET, Last post: Mar. 20 2010, 02:18 ET)
Specifically, silicon
Wood fillers  (Started: Mar. 7 2010, 20:46 ET, Last post: Mar. 8 2010, 21:10 ET)
Jap type 99 stock ?  (Started: Mar. 7 2010, 14:52 ET, Last post: Mar. 7 2010, 14:52 ET)
-- considering painting stainless steel bbl  (Started: Feb. 22 2010, 23:20 ET, Last post: Mar. 6 2010, 09:22 ET)
Water displacement oil substitute?  (Started: Jul. 31 2008, 09:17 ET, Last post: Feb. 25 2010, 19:37 ET)
Parkerizing question  (Started: Feb. 18 2010, 14:10 ET, Last post: Feb. 24 2010, 21:51 ET)
Double park oxides?
New stock  (Started: Feb. 12 2010, 03:09 ET, Last post: Feb. 12 2010, 03:09 ET)
Need stock help!  (Started: Feb. 9 2010, 15:02 ET, Last post: Feb. 11 2010, 17:04 ET)
Melonite qpq for rifle actions and barrels?  (Started: Feb. 2 2010, 18:03 ET, Last post: Feb. 9 2010, 09:10 ET)
Color of walnut for stocks  (Started: Jan. 17 2010, 19:03 ET, Last post: Jan. 18 2010, 15:11 ET)
Woodburning stocks  (Started: Jan. 9 2010, 13:06 ET, Last post: Jan. 13 2010, 13:08 ET)
Made colored stains need opinions  (Started: Jan. 8 2010, 23:55 ET, Last post: Jan. 9 2010, 22:17 ET)
How do i determine butstock dimensions?  (Started: Jun. 19 2009, 12:01 ET, Last post: Jan. 9 2010, 19:59 ET)
Quick de-greasing question.  (Started: Aug. 23 2009, 17:08 ET, Last post: Jan. 9 2010, 19:24 ET)
Anodizing aluminum  (Started: Nov. 24 2009, 23:32 ET, Last post: Dec. 17 2009, 20:25 ET)
Molyresin clearcoat over other finishes.  (Started: Nov. 20 2009, 23:41 ET, Last post: Nov. 21 2009, 10:16 ET)
Could work...
Home anodizing heating elements...  (Started: Nov. 4 2009, 00:49 ET, Last post: Nov. 18 2009, 16:10 ET)
Who can blue my shotgun?  (Started: Nov. 9 2009, 19:36 ET, Last post: Nov. 15 2009, 12:59 ET)
Imitation "case hardened" color  (Started: Aug. 22 2009, 04:57 ET, Last post: Nov. 8 2009, 13:04 ET)
Als bill holmes
Hot caustic blue  (Started: Oct. 22 2009, 02:28 ET, Last post: Oct. 24 2009, 03:29 ET)
Substituting chemicals
How to sand a laminated stock?  (Started: Oct. 1 2009, 13:04 ET, Last post: Oct. 11 2009, 22:34 ET)
Anyone ever nitre blue a 1911?  (Started: Sep. 21 2009, 22:47 ET, Last post: Sep. 28 2009, 14:18 ET)
Bluing tank question, sort of  (Started: Sep. 25 2009, 22:50 ET, Last post: Sep. 26 2009, 14:29 ET)
How's this for phos. acid!  (Started: Sep. 24 2009, 15:59 ET, Last post: Sep. 24 2009, 15:59 ET)
Pilkingtons off the shelf  (Started: Sep. 24 2009, 01:35 ET, Last post: Sep. 24 2009, 12:28 ET)
Any know where to get in seattle?
Moly finish? multiple questions.  (Started: Aug. 13 2009, 22:49 ET, Last post: Sep. 17 2009, 23:00 ET)
Sand blasting grit size  (Started: Sep. 3 2009, 23:21 ET, Last post: Sep. 5 2009, 02:17 ET)
Factory stock stains?  (Started: Aug. 29 2009, 09:10 ET, Last post: Aug. 31 2009, 16:34 ET)
What and how?
20 minute rust bluing!  (Started: Aug. 11 2009, 04:12 ET, Last post: Aug. 18 2009, 16:20 ET)
Diy fiberglass stock  (Started: Aug. 2 2009, 17:53 ET, Last post: Aug. 5 2009, 21:02 ET)
Great info
Rust blueing  (Started: Jul. 29 2009, 07:04 ET, Last post: Jul. 29 2009, 11:03 ET)
Dark park recipie  (Started: Jul. 6 2009, 08:05 ET, Last post: Jul. 17 2009, 12:20 ET)
1911
Tea and coffee finishes  (Started: Jul. 4 2009, 20:53 ET, Last post: Jul. 15 2009, 20:33 ET)
Found some old test results of mine
Rust convertor  (Started: Jul. 14 2009, 11:02 ET, Last post: Jul. 14 2009, 19:38 ET)
Parkerizing recipe brainstorm
Blasting questions???  (Started: Jun. 20 2009, 12:55 ET, Last post: Jul. 6 2009, 09:54 ET)
Rust blue with tritium  (Started: Jul. 1 2009, 19:15 ET, Last post: Jul. 3 2009, 07:34 ET)
Duracoat substitute  (Started: Apr. 21 2008, 12:42 ET, Last post: Jun. 26 2009, 21:17 ET)
First duracoat attempt  (Started: Jan. 11 2009, 10:37 ET, Last post: Jun. 24 2009, 21:34 ET)
Hk dark is green
Hot blued a slide today.  thanks, blindhogg!  (Started: Jun. 4 2009, 22:52 ET, Last post: Jun. 12 2009, 13:28 ET)
Bead blasting before anodizing  (Started: Jun. 6 2009, 10:05 ET, Last post: Jun. 10 2009, 08:40 ET)
Easy 'fire' blue method.  (Started: Jun. 8 2009, 09:23 ET, Last post: Jun. 8 2009, 17:39 ET)
Anyone try it?
Stock blank  (Started: May 31 2009, 16:09 ET, Last post: Jun. 3 2009, 19:08 ET)
Looking for culled/damaged blank?
Wood coloring and finishes  (Started: May 2 2009, 00:35 ET, Last post: May 31 2009, 14:46 ET)
Stock coloring & oil finishes
Hot blue question  (Started: Apr. 3 2009, 01:01 ET, Last post: May 30 2009, 19:37 ET)
Coloring fiberglass resin  (Started: May 12 2009, 17:21 ET, Last post: May 28 2009, 23:31 ET)
Need help hand-polishing  (Started: Feb. 12 2009, 13:26 ET, Last post: Apr. 15 2009, 12:21 ET)
Stainless steel guns
Sandblast prep for duracoat  (Started: Mar. 27 2009, 21:44 ET, Last post: Apr. 12 2009, 11:02 ET)
Busy day  (Started: Mar. 1 2009, 12:39 ET, Last post: Mar. 27 2009, 01:13 ET)
Kept the kettle bubbling
Engraving help?  (Started: Feb. 28 2009, 22:07 ET, Last post: Mar. 1 2009, 21:19 ET)
Parkerizing aluminum  (Started: Feb. 17 2009, 18:12 ET, Last post: Feb. 20 2009, 19:25 ET)
Pitfalls?
Parkerizing question  (Started: Oct. 1 2008, 06:04 ET, Last post: Feb. 17 2009, 23:55 ET)
Color case hardened  (Started: Aug. 14 2008, 17:06 ET, Last post: Feb. 17 2009, 18:38 ET)
Rust bluing  (Started: Jan. 20 2009, 14:12 ET, Last post: Jan. 24 2009, 17:46 ET)
NEED SOME ADVICE  (Started: Nov. 3 2002, 05:01 ET, Last post: Jan. 22 2009, 03:44 ET)
Homemade Hot Blueing formulae
Color case hardening  (Started: Jan. 17 2009, 11:02 ET, Last post: Jan. 19 2009, 22:06 ET)
Truck bed liner  (Started: Jan. 10 2009, 19:21 ET, Last post: Jan. 18 2009, 10:55 ET)
Metal finishes (bule vs park)  (Started: Nov. 14 2008, 13:33 ET, Last post: Jan. 14 2009, 01:02 ET)
How do you tell the diffrence??
Bluing or parkerizing in new shop?  (Started: Jan. 5 2009, 09:31 ET, Last post: Jan. 14 2009, 00:50 ET)
De-chroming  (Started: Dec. 31 2008, 09:39 ET, Last post: Dec. 31 2008, 10:51 ET)
Brass tack stock decoration  (Started: Dec. 30 2008, 11:36 ET, Last post: Dec. 30 2008, 17:59 ET)
How to?
Baked lacquer  (Started: Dec. 18 2008, 10:30 ET, Last post: Dec. 20 2008, 07:45 ET)
To buff and shine with?
Sput welder  (Started: Dec. 18 2008, 13:51 ET, Last post: Dec. 19 2008, 02:02 ET)
Are plans available?
Engraving an anodized surface  (Started: Dec. 5 2008, 09:34 ET, Last post: Dec. 17 2008, 23:30 ET)
Blueromover  (Started: Dec. 12 2008, 13:21 ET, Last post: Dec. 17 2008, 17:18 ET)
Is linseedoil waterproof?  (Started: Dec. 8 2008, 19:19 ET, Last post: Dec. 9 2008, 18:14 ET)
Duracoat finish  (Started: Dec. 6 2008, 19:24 ET, Last post: Dec. 8 2008, 23:37 ET)
Hot bluing questions  (Started: Dec. 2 2008, 15:05 ET, Last post: Dec. 5 2008, 16:19 ET)
Anodized finally  (Started: Nov. 16 2008, 22:22 ET, Last post: Nov. 19 2008, 23:24 ET)
Anyone try caswell's black oxide kit?  (Started: Jun. 9 2008, 20:28 ET, Last post: Nov. 19 2008, 15:14 ET)
Just another cold blue or ?
Finish to cover repairs/fills  (Started: Nov. 7 2008, 03:11 ET, Last post: Nov. 19 2008, 10:56 ET)
Parkerizing question  (Started: Nov. 12 2008, 22:21 ET, Last post: Nov. 14 2008, 07:01 ET)
Old formulas  (Started: Oct. 28 2008, 09:29 ET, Last post: Nov. 10 2008, 22:02 ET)
Blasting cabinet ideas?  (Started: Oct. 29 2008, 20:35 ET, Last post: Nov. 7 2008, 12:55 ET)
Grizzly tools parkerizing solution  (Started: Nov. 1 2008, 17:15 ET, Last post: Nov. 1 2008, 18:52 ET)
Ar15 mags  (Started: Oct. 16 2008, 04:43 ET, Last post: Oct. 26 2008, 06:19 ET)
Remington 7615 mags
Pakerizing and brazed joints - compatible?  (Started: Oct. 25 2008, 16:33 ET, Last post: Oct. 25 2008, 23:25 ET)
Hot bluing  (Started: Oct. 17 2008, 21:51 ET, Last post: Oct. 22 2008, 19:51 ET)
Caustic was easy to get
Chrome plating barrel bores: how can i?  (Started: Apr. 30 2008, 20:21 ET, Last post: Oct. 9 2008, 20:58 ET)
Need boring tolerances,chroming supplies
$parkerizing question.. again  (Started: Oct. 2 2008, 08:04 ET, Last post: Oct. 3 2008, 08:45 ET)
Finishing a boyds stock  (Started: Jul. 19 2008, 07:28 ET, Last post: Oct. 1 2008, 12:30 ET)
Potassium permanganate finish?  (Started: Aug. 7 2008, 12:54 ET, Last post: Sep. 22 2008, 20:39 ET)
Turns things purple.
Who to blue  (Started: Sep. 17 2008, 02:53 ET, Last post: Sep. 17 2008, 02:53 ET)
Reblue marlin 39
Finishing a laminated stock  (Started: Sep. 12 2008, 12:47 ET, Last post: Sep. 15 2008, 00:33 ET)
Is there any special technique?
Coin finish question  (Started: Sep. 8 2008, 01:26 ET, Last post: Sep. 8 2008, 23:44 ET)
How?
Most durable do it yourself finish?  (Started: Aug. 1 2008, 13:44 ET, Last post: Sep. 5 2008, 16:03 ET)
What are our options?
Charcoal bluing  (Started: Sep. 2 2008, 12:30 ET, Last post: Sep. 5 2008, 12:34 ET)
Pros and cons?
Strange refinishing question  (Started: Aug. 30 2008, 16:31 ET, Last post: Sep. 3 2008, 11:43 ET)
Large plastic cooler for parkerizing solution?  (Started: Apr. 27 2008, 12:54 ET, Last post: Aug. 18 2008, 19:43 ET)
Possible?
Long term storage  (Started: Jun. 16 2008, 19:23 ET, Last post: Jul. 19 2008, 11:08 ET)
Old guns
Refinished stock  (Started: Jun. 12 2008, 22:26 ET, Last post: Jun. 13 2008, 00:01 ET)
Lee enfield
Clear coat stock finish  (Started: Jan. 31 2008, 19:12 ET, Last post: Jun. 8 2008, 00:35 ET)
Lemon oil.  (Started: May 3 2008, 20:47 ET, Last post: Jun. 7 2008, 14:38 ET)
Great stuff.
Anyone interested in hot bluing some items?  (Started: Jun. 1 2008, 18:29 ET, Last post: Jun. 3 2008, 01:04 ET)
A bulk batch of t-nuts
Confused on parking ratio with acid.  (Started: Jun. 1 2008, 11:03 ET, Last post: Jun. 1 2008, 11:03 ET)
Cleaner degreaser,  (Started: May 29 2008, 08:39 ET, Last post: Jun. 1 2008, 09:52 ET)
Any avice on cutting stock blanks?  (Started: May 29 2008, 00:16 ET, Last post: May 30 2008, 15:25 ET)
Mannlicher  style stocks
I was thinking  (Started: May 21 2008, 08:12 ET, Last post: May 21 2008, 23:27 ET)
Recoating
Has anyone tried this???  (Started: May 12 2008, 15:49 ET, Last post: May 21 2008, 02:29 ET)
Stainless in the bluing tank!!!!
Grain direction  (Started: May 13 2008, 01:06 ET, Last post: May 15 2008, 21:00 ET)
Powder coating with harbor freight  (Started: May 11 2008, 12:31 ET, Last post: May 11 2008, 14:20 ET)
Synthetic car waxes for blueing?  (Started: May 8 2008, 18:16 ET, Last post: May 9 2008, 09:15 ET)
Combining steam pans for a park tank?  (Started: May 8 2008, 19:17 ET, Last post: May 9 2008, 00:03 ET)
Good idea?
Gun painting  (Started: Apr. 24 2008, 07:05 ET, Last post: May 1 2008, 00:36 ET)
Parkerizing formula  (Started: Apr. 18 2006, 09:32 ET, Last post: Apr. 30 2008, 02:06 ET)
Using standard chemicals
Woods for pistol grips?  (Started: Nov. 28 2007, 03:18 ET, Last post: Apr. 20 2008, 21:35 ET)
A wood request?
Park and blue  (Started: Apr. 13 2008, 21:37 ET, Last post: Apr. 20 2008, 19:37 ET)
Doing both
Disgusted with brownell's "moly"  (Started: Mar. 18 2008, 10:41 ET, Last post: Apr. 19 2008, 15:14 ET)
Aluminum oxide blast media  (Started: Apr. 7 2008, 08:48 ET, Last post: Apr. 18 2008, 08:55 ET)
Ok to use???
B. casey aluminum black... results?  (Started: Apr. 12 2008, 11:56 ET, Last post: Apr. 14 2008, 01:28 ET)
Phenolic resin wood sealer........  (Started: Apr. 11 2008, 22:09 ET, Last post: Apr. 12 2008, 06:27 ET)
Blackfast bluing process  (Started: Apr. 10 2008, 04:06 ET, Last post: Apr. 12 2008, 00:10 ET)
Have anyone use them on guns?
How can i copy this paint job?  (Started: Feb. 23 2008, 09:41 ET, Last post: Apr. 11 2008, 22:06 ET)
Polishing rouge  (Started: Apr. 9 2008, 21:05 ET, Last post: Apr. 10 2008, 16:27 ET)
How do i use it properly?
Inlays  (Started: Apr. 4 2008, 18:52 ET, Last post: Apr. 5 2008, 12:11 ET)
Exotic wood inlays on gunstocks
Building bluing tanks  (Started: Mar. 10 2008, 12:56 ET, Last post: Mar. 31 2008, 10:36 ET)
Removing parkerizing.  (Started: Mar. 27 2008, 16:44 ET, Last post: Mar. 30 2008, 19:00 ET)
Beetroot stain for stocks??  (Started: Mar. 14 2008, 21:51 ET, Last post: Mar. 18 2008, 04:53 ET)
Anyone heard of this before?
Bluing salts  (Started: Mar. 14 2008, 13:59 ET, Last post: Mar. 14 2008, 13:59 ET)
Sulfer content
Removing nickle  (Started: Mar. 10 2008, 13:03 ET, Last post: Mar. 11 2008, 11:36 ET)
Finishing a laminated stock  (Started: Mar. 5 2008, 22:18 ET, Last post: Mar. 7 2008, 15:06 ET)
Is it different from solid wood?
Hot bluing a rifle bolt  (Started: Feb. 21 2008, 17:15 ET, Last post: Feb. 23 2008, 04:47 ET)
Duracoat cleanup?  (Started: Feb. 21 2008, 00:36 ET, Last post: Feb. 21 2008, 17:46 ET)
Gun paint  (Started: Jan. 1 2008, 18:32 ET, Last post: Feb. 21 2008, 09:35 ET)
What's a good rust proof finish?  (Started: Feb. 18 2008, 21:00 ET, Last post: Feb. 20 2008, 16:41 ET)
Flattening bone  (Started: Nov. 23 2007, 10:32 ET, Last post: Feb. 4 2008, 14:22 ET)
Chemical bath?
Any know of a good source for blast media?  (Started: Jan. 23 2008, 22:30 ET, Last post: Jan. 28 2008, 12:33 ET)
What to use to polish aluminum prior to anodizing?  (Started: Jan. 23 2008, 19:12 ET, Last post: Jan. 25 2008, 20:42 ET)
10/xx receiver
Plow handle shotgun grips  (Started: Jan. 21 2008, 09:09 ET, Last post: Jan. 25 2008, 09:05 ET)
How to make?
Parkerizing troubleshooting question  (Started: Jan. 20 2008, 19:36 ET, Last post: Jan. 25 2008, 02:53 ET)
Faux color case-hardening  (Started: Jan. 21 2008, 16:42 ET, Last post: Jan. 21 2008, 16:42 ET)
Laser beams!  (Started: Jan. 18 2008, 19:42 ET, Last post: Jan. 21 2008, 01:38 ET)
Laser etching
Solar lux stain  (Started: Jan. 13 2008, 22:41 ET, Last post: Jan. 15 2008, 09:52 ET)
Gunstock stain
New blue job  (Started: Jan. 14 2008, 20:41 ET, Last post: Jan. 14 2008, 21:51 ET)
Another ruger
Polishing for bluing  (Started: Nov. 29 2007, 16:10 ET, Last post: Jan. 10 2008, 15:37 ET)
Red tint???
Checkering patterns ??  (Started: Dec. 5 2007, 15:48 ET, Last post: Jan. 5 2008, 20:24 ET)
Question about blast media  (Started: Dec. 29 2007, 16:18 ET, Last post: Jan. 3 2008, 19:23 ET)
Need help please.
Fyi chemical source  (Started: Dec. 28 2007, 11:03 ET, Last post: Dec. 28 2007, 12:05 ET)
Bluing mystery  (Started: Oct. 3 2007, 15:19 ET, Last post: Dec. 28 2007, 08:07 ET)
Bluing formula question  (Started: Dec. 21 2007, 21:31 ET, Last post: Dec. 27 2007, 15:08 ET)
Filling in barrel/receiver stamping  (Started: Dec. 22 2007, 20:37 ET, Last post: Dec. 26 2007, 20:12 ET)
Black oxide  (Started: Dec. 23 2007, 20:19 ET, Last post: Dec. 26 2007, 15:09 ET)
Parkerizing kits  (Started: Jun. 2 2007, 15:37 ET, Last post: Dec. 20 2007, 11:48 ET)
Whats the best
Ishapore enfield  (Started: Dec. 12 2007, 19:15 ET, Last post: Dec. 19 2007, 23:11 ET)
Refinishing stock
Parkerizing "mask"  (Started: Dec. 5 2007, 13:12 ET, Last post: Dec. 5 2007, 19:10 ET)
Source for oxpho paste  (Started: Dec. 5 2007, 09:29 ET, Last post: Dec. 5 2007, 09:50 ET)
Rit dye and polymer frame  (Started: Nov. 6 2007, 15:00 ET, Last post: Nov. 28 2007, 01:01 ET)
Using rit dye on a polymer frame
Parking with jasco prep & primer  (Started: Nov. 22 2007, 16:06 ET, Last post: Nov. 22 2007, 17:13 ET)
Engraving - for the n00b  (Started: Nov. 16 2007, 14:56 ET, Last post: Nov. 21 2007, 12:37 ET)
Tools needed
Tung oil turns jell  (Started: Nov. 14 2007, 08:06 ET, Last post: Nov. 15 2007, 00:28 ET)
Brownells acraglas  (Started: Sep. 1 2007, 15:31 ET, Last post: Nov. 4 2007, 17:53 ET)
Simple engraving  (Started: Oct. 16 2007, 15:59 ET, Last post: Nov. 3 2007, 09:25 ET)
Rust blueing  (Started: Nov. 2 2007, 00:17 ET, Last post: Nov. 2 2007, 22:50 ET)
Rust blueing formulas
Boron carbide - chris?  others?  (Started: Oct. 17 2007, 14:11 ET, Last post: Oct. 27 2007, 15:12 ET)
Re-use park solution?  (Started: Oct. 26 2007, 17:47 ET, Last post: Oct. 27 2007, 15:07 ET)
Barrel finishing - how smooth?  (Started: Oct. 25 2007, 12:19 ET, Last post: Oct. 26 2007, 14:05 ET)
Trying to rust blue, and ?#$%?)!!!  (Started: Sep. 5 2007, 13:28 ET, Last post: Oct. 23 2007, 12:43 ET)
Electrolytic rust removal  (Started: Sep. 15 2007, 13:05 ET, Last post: Oct. 20 2007, 02:07 ET)
For big time rust
My ammonium nitrate didn't fiz - what went wrong  (Started: Sep. 19 2007, 17:23 ET, Last post: Oct. 17 2007, 10:23 ET)
An dud.
My how to: parkerizing  (Started: Jul. 16 2005, 13:16 ET, Last post: Oct. 15 2007, 18:48 ET)
Need help removing solder  (Started: Oct. 13 2007, 10:30 ET, Last post: Oct. 15 2007, 01:05 ET)
Question about batteries for park?  (Started: Oct. 13 2007, 09:20 ET, Last post: Oct. 14 2007, 19:23 ET)
Metal finishing tip  (Started: Sep. 28 2007, 18:49 ET, Last post: Oct. 7 2007, 21:09 ET)
From brownells
'slow rust brown'? how?  (Started: Oct. 5 2007, 12:50 ET, Last post: Oct. 6 2007, 13:36 ET)
Is this sodium hydtoxide (lye)???  (Started: Sep. 12 2007, 06:37 ET, Last post: Sep. 26 2007, 08:24 ET)
Anyone here make gun stocks??  (Started: Sep. 16 2007, 12:50 ET, Last post: Sep. 16 2007, 19:34 ET)
Br stocks
News flash on nitre blue  (Started: Sep. 15 2007, 10:56 ET, Last post: Sep. 16 2007, 01:38 ET)
New technique for small parts
10/22 stock modifications  (Started: Jun. 30 2007, 18:43 ET, Last post: Sep. 14 2007, 21:24 ET)
Opened up for bull barrel
Anodise acid ratios  (Started: Aug. 19 2007, 21:56 ET, Last post: Sep. 12 2007, 00:27 ET)
Nitre bluing experiment  (Started: Sep. 6 2007, 17:45 ET, Last post: Sep. 10 2007, 09:31 ET)
Multiple finish types  (Started: Sep. 7 2007, 11:50 ET, Last post: Sep. 7 2007, 21:42 ET)
On one gun
Airbrush  (Started: Oct. 12 2006, 00:37 ET, Last post: Sep. 3 2007, 16:20 ET)
What do you use?
Film dipped finish  (Started: Sep. 2 2007, 19:41 ET, Last post: Sep. 2 2007, 19:41 ET)
Another alternative
Any visual comparasons of the various finished ?  (Started: Sep. 1 2007, 05:41 ET, Last post: Sep. 1 2007, 05:41 ET)
Bluing - did i ruin my salts????  (Started: Jul. 31 2007, 11:11 ET, Last post: Aug. 23 2007, 10:41 ET)
Bath to hot - question of the day
Anodizing for the first/second time  (Started: Jul. 17 2007, 01:51 ET, Last post: Aug. 20 2007, 21:13 ET)
A short saga, & lessons learned
Introduction and current project  (Started: Aug. 4 2007, 20:11 ET, Last post: Aug. 8 2007, 15:04 ET)
Re post from newcomers corner
1911 finish  (Started: Aug. 3 2007, 16:48 ET, Last post: Aug. 3 2007, 16:49 ET)
"beater" stock finish  (Started: Jun. 25 2007, 13:18 ET, Last post: Jul. 30 2007, 03:21 ET)
Brushed finish (how to (again - $%^&*))  (Started: Jul. 2 2007, 14:07 ET, Last post: Jul. 3 2007, 10:19 ET)
Boy were you guys right  (Started: Jun. 14 2007, 19:29 ET, Last post: Jun. 18 2007, 17:19 ET)
Got new stock today
Need advice on stock finish  (Started: Jan. 11 2005, 21:54 ET, Last post: Jun. 14 2007, 04:43 ET)
Bluing not working - what next  (Started: Jun. 9 2007, 10:15 ET, Last post: Jun. 11 2007, 16:11 ET)
Strange bluing results!! any thoughts!!  (Started: Jun. 7 2007, 09:11 ET, Last post: Jun. 8 2007, 00:47 ET)
Norrells on a webley  (Started: May 20 2007, 20:18 ET, Last post: Jun. 6 2007, 15:36 ET)
Want refinishing tips for old revolvers
Gunkote again  (Started: Jun. 6 2007, 00:04 ET, Last post: Jun. 6 2007, 00:04 ET)
Comes in different flavors
Powder coating  (Started: Jan. 27 2007, 16:21 ET, Last post: Jun. 4 2007, 17:32 ET)
Why not? has anyone tried it
Bonding agent fer wood  (Started: Jun. 2 2007, 00:51 ET, Last post: Jun. 2 2007, 10:03 ET)
Gonna get the blues this weekend.  (Started: May 31 2007, 08:16 ET, Last post: Jun. 1 2007, 23:39 ET)
Rust bluing  (Started: Jun. 1 2007, 10:33 ET, Last post: Jun. 1 2007, 16:14 ET)
Setting up my shop for blueing  (Started: May 20 2007, 19:56 ET, Last post: May 30 2007, 21:18 ET)
Removing bluing  (Started: Nov. 3 2005, 11:55 ET, Last post: May 30 2007, 14:51 ET)
What is a easy way
Stock finish on  s+w 41 grips?  (Started: May 26 2007, 09:23 ET, Last post: May 26 2007, 09:23 ET)
Brass spacer in walnut  (Started: Mar. 12 2007, 18:25 ET, Last post: May 22 2007, 00:17 ET)
Aluminum fasteners (for anodizing)  (Started: May 20 2007, 12:15 ET, Last post: May 21 2007, 03:44 ET)
Favorite source?
Bluing with  wheeler cold blue  (Started: May 16 2007, 11:01 ET, Last post: May 16 2007, 23:09 ET)
Help?
Inletting black  (Started: May 10 2007, 11:03 ET, Last post: May 14 2007, 06:23 ET)
Parkerizing and moly coating  (Started: May 13 2007, 00:52 ET, Last post: May 13 2007, 09:41 ET)
Rusty rand  (Started: May 7 2007, 09:47 ET, Last post: May 9 2007, 22:37 ET)
Rust on my a1
Homemade stocks  (Started: Nov. 29 2005, 19:05 ET, Last post: May 2 2007, 08:00 ET)
By scasa
Brigt hard chrome  (Started: Apr. 20 2007, 12:31 ET, Last post: Apr. 21 2007, 16:03 ET)
Front strap checkering options  (Started: Apr. 20 2007, 08:37 ET, Last post: Apr. 21 2007, 09:37 ET)
Would cerakote flakes off?  (Started: Mar. 26 2007, 19:02 ET, Last post: Apr. 10 2007, 04:24 ET)
Metal finish comparisons  (Started: Apr. 2 2007, 18:58 ET, Last post: Apr. 9 2007, 20:04 ET)
Armor-tuf versus gunkote -- fight!!
Talking about stocks  (Started: Apr. 8 2007, 07:23 ET, Last post: Apr. 8 2007, 12:17 ET)
6mmbr.com
Stock inletting jig  (Started: Nov. 28 2005, 20:04 ET, Last post: Apr. 7 2007, 20:57 ET)
For using a router
Park over Blue?  (Started: Apr. 10 2003, 23:40 ET, Last post: Apr. 7 2007, 19:08 ET)
anyone have a idea..
Anodizing questions  (Started: Apr. 1 2007, 23:29 ET, Last post: Apr. 3 2007, 12:42 ET)
Is sand blasting ok
Heaters for anodizing  (Started: Apr. 1 2007, 15:31 ET, Last post: Apr. 2 2007, 21:10 ET)
A couple questions
Home bluing oxynate#7 vs. home brew  (Started: Mar. 22 2007, 11:20 ET, Last post: Apr. 1 2007, 22:23 ET)
Paint and rust stripper  (Started: Mar. 23 2007, 16:30 ET, Last post: Mar. 26 2007, 11:26 ET)
Hot bluing services?  (Started: Mar. 19 2007, 14:49 ET, Last post: Mar. 20 2007, 18:17 ET)
Funny alloy on an anschutz?  (Started: Mar. 17 2007, 11:12 ET, Last post: Mar. 18 2007, 08:31 ET)
Refinishing
Durabake  (Started: Mar. 15 2007, 06:51 ET, Last post: Mar. 17 2007, 03:15 ET)
Anyone tried it?
Rust blueing  (Started: Mar. 10 2007, 00:45 ET, Last post: Mar. 13 2007, 10:15 ET)
Removing nickle plating  (Started: Mar. 3 2007, 23:31 ET, Last post: Mar. 11 2007, 21:27 ET)
Gun kote and tritium sights  (Started: Mar. 7 2007, 14:53 ET, Last post: Mar. 9 2007, 12:20 ET)
How to apply
Light blast high gloss barrel  (Started: Feb. 28 2007, 16:18 ET, Last post: Mar. 9 2007, 07:16 ET)
Re-anodizing  (Started: Mar. 6 2007, 18:18 ET, Last post: Mar. 7 2007, 09:32 ET)
Redoing my lower
Whats used on a walther p99 & p22?  (Started: Feb. 17 2007, 04:30 ET, Last post: Feb. 25 2007, 10:54 ET)
Green park  (Started: Nov. 10 2006, 01:23 ET, Last post: Feb. 24 2007, 19:38 ET)
Baked on paint  (Started: Feb. 15 2007, 12:34 ET, Last post: Feb. 16 2007, 08:36 ET)
Alumahyde 2  (Started: Feb. 16 2007, 05:12 ET, Last post: Feb. 16 2007, 05:23 ET)
Any good?
Cerakote questions. anyone apply over parkerizing?  (Started: Feb. 14 2007, 15:24 ET, Last post: Feb. 14 2007, 15:24 ET)
Polishing a 1911  (Started: Dec. 16 2005, 21:02 ET, Last post: Feb. 8 2007, 20:32 ET)
Stainless or chrome?
A teflon question  (Started: Jan. 24 2007, 02:53 ET, Last post: Jan. 29 2007, 06:40 ET)
Durafil how to use?  (Started: Jan. 24 2007, 13:12 ET, Last post: Jan. 24 2007, 23:51 ET)
Blast media question  (Started: Oct. 11 2005, 23:12 ET, Last post: Jan. 21 2007, 02:18 ET)
Mild steel bluing tanks  (Started: Jan. 20 2007, 13:14 ET, Last post: Jan. 20 2007, 20:34 ET)
Cold roll ok?
Duracoat sticker shock  (Started: Nov. 30 2006, 16:30 ET, Last post: Jan. 18 2007, 10:56 ET)
Oven  (Started: Aug. 5 2006, 16:36 ET, Last post: Jan. 16 2007, 00:08 ET)
Low temperature
Duracote vs gunkote  (Started: Nov. 28 2006, 19:36 ET, Last post: Jan. 8 2007, 14:49 ET)
Glass oxide  (Started: Jan. 2 2007, 13:43 ET, Last post: Jan. 7 2007, 10:17 ET)
Parkerizing on stove?  (Started: Dec. 16 2006, 19:24 ET, Last post: Jan. 5 2007, 20:18 ET)
Glass bedding after duracoat  (Started: Jan. 2 2007, 16:41 ET, Last post: Jan. 3 2007, 14:24 ET)
17-4 stainless- finish needed?  (Started: Dec. 25 2006, 08:39 ET, Last post: Dec. 31 2006, 22:16 ET)
Newbie needs help refinishing  (Started: Dec. 19 2006, 21:49 ET, Last post: Dec. 24 2006, 02:31 ET)
Refinishing old .303 rifle
Hydrogen embrittlement relief (degassing)  (Started: Dec. 20 2006, 09:14 ET, Last post: Dec. 20 2006, 16:50 ET)
After using acidic bath to remove bluing
Parkerizing for the novice, need suggestions  (Started: Dec. 13 2006, 14:59 ET, Last post: Dec. 13 2006, 18:56 ET)
Glass bedding a molded synthetic stock?  (Started: Dec. 13 2006, 14:53 ET, Last post: Dec. 13 2006, 17:51 ET)
Hot bluing a carbon barrel  (Started: Nov. 29 2006, 09:11 ET, Last post: Dec. 10 2006, 02:29 ET)
Do you need to plug the ends?
Hot bluing s/s shotgun  (Started: Nov. 12 2006, 17:07 ET, Last post: Dec. 8 2006, 09:36 ET)
Stainless steel not for use as a bluing tank  (Started: Dec. 4 2006, 15:03 ET, Last post: Dec. 5 2006, 11:10 ET)
What to use for the wire parts baskets
Model 94 refinish  (Started: Nov. 28 2006, 00:11 ET, Last post: Nov. 28 2006, 00:57 ET)
Refinish of a rust freckled model 94
Painting stainlesscoat?  (Started: Nov. 19 2006, 19:52 ET, Last post: Nov. 22 2006, 17:32 ET)
What are my options.....duracoat?
Can chrome-molly frame/slide be hot blued?  (Started: Nov. 18 2006, 11:55 ET, Last post: Nov. 18 2006, 12:17 ET)
Bluing chrome-molly
Lc smith receiver  (Started: Nov. 15 2006, 18:59 ET, Last post: Nov. 16 2006, 14:38 ET)
Rebluing marlin  (Started: Oct. 5 2006, 22:54 ET, Last post: Nov. 13 2006, 10:08 ET)
Model 39a
12l14 steel  (Started: Nov. 9 2006, 12:35 ET, Last post: Nov. 9 2006, 13:11 ET)
Manganeses parkerizing shows dark grey not black  (Started: Nov. 8 2006, 00:10 ET, Last post: Nov. 8 2006, 22:51 ET)
Cold blue revisited  (Started: Nov. 1 2006, 10:54 ET, Last post: Nov. 4 2006, 00:48 ET)
New technique - it works!
Cold bluing a stainless thumb safety  (Started: Nov. 2 2006, 14:52 ET, Last post: Nov. 2 2006, 19:13 ET)
Cold bluing a stainless thumb safety
Rust-o-leum as a finish?  (Started: Oct. 15 2006, 21:49 ET, Last post: Oct. 29 2006, 22:40 ET)
Park on 45 slide  (Started: Oct. 26 2006, 15:08 ET, Last post: Oct. 29 2006, 22:32 ET)
Duracoat products  (Started: Oct. 26 2006, 10:17 ET, Last post: Oct. 28 2006, 03:07 ET)
Stippling rear strap  (Started: Oct. 20 2006, 16:30 ET, Last post: Oct. 26 2006, 08:36 ET)
Parkerizing question  (Started: Oct. 24 2006, 11:37 ET, Last post: Oct. 24 2006, 20:23 ET)
Refinished yugo forearms  (Started: Oct. 11 2006, 02:00 ET, Last post: Oct. 11 2006, 07:01 ET)
Stock carving machine  (Started: Sep. 22 2006, 16:24 ET, Last post: Oct. 5 2006, 18:42 ET)
Check out this link....
Refinishing ruger mk11 grips.  (Started: Sep. 14 2006, 20:02 ET, Last post: Sep. 30 2006, 07:52 ET)
Sand blasting grit size  (Started: Aug. 29 2006, 12:26 ET, Last post: Sep. 23 2006, 02:57 ET)
Refinishing a stock and sweat stains  (Started: Sep. 1 2006, 09:12 ET, Last post: Sep. 20 2006, 11:40 ET)
Bluing win 94 woes  (Started: Mar. 30 2005, 20:02 ET, Last post: Sep. 19 2006, 20:30 ET)
Covering kimber script  (Started: Sep. 16 2006, 11:38 ET, Last post: Sep. 18 2006, 02:39 ET)
New yugo sks  (Started: Mar. 7 2005, 16:08 ET, Last post: Sep. 14 2006, 18:06 ET)
Cosmolene on stock
Removing rust from parkerizing  (Started: Aug. 27 2006, 10:15 ET, Last post: Sep. 14 2006, 06:59 ET)
Rust pitting  (Started: Aug. 19 2006, 18:43 ET, Last post: Aug. 29 2006, 19:03 ET)
Small siler lock  (Started: Aug. 26 2006, 12:25 ET, Last post: Aug. 28 2006, 20:10 ET)
Looking for a lockplate cutout template
Stock book  (Started: Aug. 22 2006, 14:25 ET, Last post: Aug. 25 2006, 21:11 ET)
Smallest peices to be duracoated  (Started: Aug. 24 2006, 14:27 ET, Last post: Aug. 24 2006, 20:35 ET)
Lauers dura cote  (Started: Aug. 12 2006, 16:15 ET, Last post: Aug. 21 2006, 15:45 ET)
Refinishing optics  (Started: Aug. 15 2006, 05:42 ET, Last post: Aug. 19 2006, 22:53 ET)
Cold bluing  (Started: Aug. 17 2006, 22:59 ET, Last post: Aug. 18 2006, 01:54 ET)
Stainless duracoat  (Started: Aug. 16 2006, 12:50 ET, Last post: Aug. 16 2006, 21:44 ET)
Pics
Parkerizing question  (Started: Aug. 16 2006, 07:36 ET, Last post: Aug. 16 2006, 12:11 ET)
About re-parkerizing a part
Kevlar stock?  (Started: Aug. 12 2006, 15:42 ET, Last post: Aug. 12 2006, 22:48 ET)
Can i use iron pipe for park source?  (Started: Aug. 11 2006, 17:35 ET, Last post: Aug. 11 2006, 19:56 ET)
Slow rust blue question  (Started: Aug. 8 2006, 21:34 ET, Last post: Aug. 8 2006, 21:46 ET)
Blackened two mausers  (Started: Aug. 5 2006, 16:16 ET, Last post: Aug. 7 2006, 21:48 ET)
Receivers only
Sea fin teak oil finish laminated wood  (Started: Aug. 4 2006, 04:46 ET, Last post: Aug. 5 2006, 16:56 ET)
Sea fin teak oil finish laminated wood
Burning rope,  (Started: Jul. 27 2006, 23:57 ET, Last post: Aug. 3 2006, 00:03 ET)
Mauser stock
Where can i get a wood stock?  (Started: Jul. 6 2006, 19:09 ET, Last post: Jul. 25 2006, 08:51 ET)
Pre-inletted semi inletted etc
Cleaning the parts before blueing..  (Started: Apr. 17 2006, 17:59 ET, Last post: Jul. 23 2006, 21:41 ET)
How to darken stainless  (Started: May 31 2006, 22:10 ET, Last post: Jul. 23 2006, 21:00 ET)
Hot bluing results  (Started: Jul. 17 2006, 20:53 ET, Last post: Jul. 21 2006, 22:10 ET)
It actually works!
Bueing burner  (Started: Jul. 5 2006, 19:16 ET, Last post: Jul. 18 2006, 20:46 ET)
My fireworks for the 4th
Help with arrow finish problem  (Started: Jul. 13 2006, 00:21 ET, Last post: Jul. 13 2006, 03:45 ET)
Automotive clear coat for gun stock ??  (Started: Jul. 12 2006, 21:17 ET, Last post: Jul. 13 2006, 03:39 ET)
Looking for high gloss finish
My stock finishes  (Started: Jul. 10 2006, 19:54 ET, Last post: Jul. 10 2006, 19:54 ET)
Still working it out
Sodium hydroxide  (Started: Apr. 8 2006, 14:22 ET, Last post: Jul. 3 2006, 09:40 ET)
Cold blueing  (Started: Jun. 24 2006, 16:44 ET, Last post: Jun. 30 2006, 22:35 ET)
Formula ?
Eaa"s "wonder finish"  (Started: Jun. 12 2006, 02:32 ET, Last post: Jun. 30 2006, 03:08 ET)
"dipped in glass" wood finish  (Started: Jun. 28 2006, 03:27 ET, Last post: Jun. 29 2006, 03:43 ET)
What's the easiest way to get it?
Anodizing dvd  (Started: Mar. 4 2006, 20:35 ET, Last post: Jun. 6 2006, 13:57 ET)
Wasn't one coming soon?
Anodizing/tinkering  (Started: May 31 2006, 22:23 ET, Last post: Jun. 2 2006, 23:00 ET)
Aluminum wire  (Started: Apr. 26 2006, 07:23 ET, Last post: May 31 2006, 21:58 ET)
Gunstock finish  (Started: May 15 2006, 20:09 ET, Last post: May 19 2006, 16:05 ET)
Anodizing power supply  (Started: May 14 2006, 20:35 ET, Last post: May 14 2006, 22:00 ET)
Need makes and/or models
Park'ing craftsman tools  (Started: May 9 2006, 02:05 ET, Last post: May 14 2006, 20:18 ET)
Got several old rusty ratchets
Surface area  (Started: Apr. 29 2006, 09:58 ET, Last post: May 4 2006, 23:17 ET)
Sandblast/beadblast
Hot bluing vs. parkerizing  (Started: Apr. 22 2006, 20:15 ET, Last post: Apr. 24 2006, 02:52 ET)
Duracoat - i'm a learn'n  (Started: Apr. 16 2006, 11:25 ET, Last post: Apr. 17 2006, 09:48 ET)
Blueing  (Started: Apr. 13 2006, 02:32 ET, Last post: Apr. 14 2006, 05:48 ET)
Tips for a first timer
Sodium nitrite  (Started: Apr. 6 2006, 07:46 ET, Last post: Apr. 9 2006, 05:00 ET)
Suggestions for stockwoods  (Started: Oct. 12 2005, 00:10 ET, Last post: Apr. 8 2006, 17:01 ET)
Possibly mahogany?
Hot water blueing  (Started: Jan. 28 2006, 00:39 ET, Last post: Apr. 6 2006, 06:20 ET)
I just found a stainless steel 3.5 gal  "bucket"  (Started: Apr. 1 2006, 21:06 ET, Last post: Apr. 5 2006, 17:13 ET)
Remove blueing - then stopping the process  (Started: Apr. 5 2006, 14:42 ET, Last post: Apr. 5 2006, 16:47 ET)
Finishing prior to annodizing  (Started: Feb. 14 2006, 00:19 ET, Last post: Apr. 4 2006, 12:57 ET)
Source for laminated birch  (Started: Mar. 16 2006, 16:43 ET, Last post: Mar. 23 2006, 15:46 ET)
First blue/blackening attempt  (Started: Mar. 5 2006, 20:27 ET, Last post: Mar. 16 2006, 00:11 ET)
Roy dunlap recipe
What finish  (Started: Mar. 9 2006, 23:23 ET, Last post: Mar. 15 2006, 05:22 ET)
Looking for the best finish for my needs
Stainless parkerizing tanks made.  (Started: Mar. 6 2006, 23:39 ET, Last post: Mar. 15 2006, 05:12 ET)
Phosforic acid at walmart  (Started: Feb. 14 2006, 19:04 ET, Last post: Mar. 3 2006, 07:15 ET)
Parkerizing
Anodize or kns anti-rotation pins  (Started: Mar. 1 2006, 19:07 ET, Last post: Mar. 2 2006, 20:05 ET)
Stock finish  (Started: Feb. 26 2006, 00:35 ET, Last post: Mar. 1 2006, 18:04 ET)
Kt-15-b anodizing  (Started: Feb. 28 2006, 10:59 ET, Last post: Feb. 28 2006, 10:59 ET)
Surface area of sideplates
Properly heating park solution  (Started: Feb. 20 2006, 17:43 ET, Last post: Feb. 21 2006, 19:30 ET)
Truoil stock finish advise  (Started: Jan. 31 2006, 18:57 ET, Last post: Feb. 19 2006, 18:24 ET)
Stock finish
Polishing bead blast  (Started: Dec. 30 2005, 20:33 ET, Last post: Feb. 15 2006, 15:03 ET)
Anodizing fumes?  (Started: Feb. 2 2006, 20:28 ET, Last post: Feb. 10 2006, 16:52 ET)
Engine paint on guns?  (Started: Feb. 1 2006, 04:10 ET, Last post: Feb. 8 2006, 16:04 ET)
Park problems.  (Started: Jan. 19 2006, 15:09 ET, Last post: Feb. 6 2006, 17:36 ET)
Where to get tech grade manganese?  (Started: Nov. 27 2005, 17:57 ET, Last post: Feb. 5 2006, 14:44 ET)
No jasco parking.  (Started: Jan. 16 2006, 14:24 ET, Last post: Feb. 5 2006, 14:30 ET)
Epoxy camo paints  (Started: Jan. 30 2006, 13:25 ET, Last post: Jan. 31 2006, 22:24 ET)
Park formula-weighst and measures?  (Started: Jan. 29 2006, 13:32 ET, Last post: Jan. 29 2006, 13:32 ET)
Rem 7600?  (Started: Jan. 24 2006, 20:23 ET, Last post: Jan. 26 2006, 21:18 ET)
Winchester receiver material question?  (Started: Jan. 24 2006, 08:42 ET, Last post: Jan. 25 2006, 21:42 ET)
Metal checkering question?  (Started: Jan. 10 2006, 13:30 ET, Last post: Jan. 23 2006, 14:23 ET)
1911 front strap
Duracoat surface prep?  (Started: Jan. 22 2006, 12:35 ET, Last post: Jan. 22 2006, 13:24 ET)
Parkerizing q's  (Started: Jan. 18 2006, 01:34 ET, Last post: Jan. 18 2006, 16:29 ET)
"correct" finnish for an m1917  (Started: Jan. 17 2006, 07:27 ET, Last post: Jan. 17 2006, 15:07 ET)
Park. touch-up  (Started: Jan. 17 2006, 10:58 ET, Last post: Jan. 17 2006, 10:58 ET)
Fixing scratches
Parkerizing win 94  (Started: Oct. 8 2005, 23:47 ET, Last post: Jan. 17 2006, 07:19 ET)
Can i keep metal from rust b4 parking?  (Started: Jan. 9 2006, 13:04 ET, Last post: Jan. 10 2006, 16:29 ET)
Beging parkerizing  (Started: Jan. 7 2006, 03:52 ET, Last post: Jan. 7 2006, 12:15 ET)
Suggestions on getting started
Savage m-24  (Started: Jan. 6 2006, 21:16 ET, Last post: Jan. 7 2006, 00:09 ET)
Can it be hot blued?
Parkerized an xd slide  (Started: Dec. 28 2005, 17:27 ET, Last post: Dec. 28 2005, 23:37 ET)
Carbonia blue  (Started: Dec. 27 2005, 00:13 ET, Last post: Dec. 28 2005, 00:08 ET)
Park before moly resin  (Started: Dec. 25 2005, 17:48 ET, Last post: Dec. 26 2005, 23:07 ET)
How to protect checkering?  (Started: Dec. 17 2005, 21:27 ET, Last post: Dec. 17 2005, 22:09 ET)
When sanding stock for refinish
Electronic thermometer  (Started: Dec. 9 2005, 19:06 ET, Last post: Dec. 17 2005, 19:35 ET)
Duracoat prep work  (Started: Dec. 16 2005, 22:04 ET, Last post: Dec. 17 2005, 13:14 ET)
Checkmate refinishing?  (Started: Nov. 8 2005, 00:05 ET, Last post: Dec. 16 2005, 01:18 ET)
Inconsistant hot bluing results  (Started: Oct. 19 2005, 07:00 ET, Last post: Dec. 15 2005, 11:09 ET)
Does age or freezing affect liquid gunkote?  (Started: Nov. 7 2005, 09:45 ET, Last post: Dec. 9 2005, 14:32 ET)
Just doesn't seem durable
Stock carving question.  (Started: Sep. 27 2005, 00:33 ET, Last post: Nov. 28 2005, 10:59 ET)
Newbie is ready for a challenge.
Trying again  (Started: Sep. 6 2005, 19:31 ET, Last post: Nov. 27 2005, 18:32 ET)
Picture of the bounty hunter "after"
New wood for my beretta  (Started: Nov. 15 2005, 11:53 ET, Last post: Nov. 24 2005, 11:09 ET)
Anschutz 1451 stock  (Started: Oct. 26 2005, 00:19 ET, Last post: Nov. 11 2005, 11:34 ET)
The finish
Question on aluma-hyde  (Started: Nov. 3 2005, 17:54 ET, Last post: Nov. 10 2005, 23:54 ET)
Best black poly/teflon finish for a pistol  (Started: Jul. 28 2005, 19:33 ET, Last post: Nov. 8 2005, 11:35 ET)
Best way to remove/strip hard chorme?  (Started: Aug. 29 2005, 04:22 ET, Last post: Nov. 5 2005, 21:46 ET)
Parking a ak kit, barrel question  (Started: Aug. 4 2005, 00:03 ET, Last post: Nov. 5 2005, 17:16 ET)
And one other question
Antique metal  (Started: Nov. 1 2005, 15:39 ET, Last post: Nov. 1 2005, 20:00 ET)
Sparkle with park  (Started: Oct. 30 2005, 00:24 ET, Last post: Nov. 1 2005, 03:01 ET)
Old Boer Blueing  (Started: Aug. 7 2004, 23:06 ET, Last post: Nov. 1 2005, 01:03 ET)
Great Grandfather's method
Slow rust blue questions  (Started: Oct. 27 2005, 06:02 ET, Last post: Oct. 29 2005, 05:54 ET)
Teflon coating  (Started: Oct. 10 2005, 19:24 ET, Last post: Oct. 27 2005, 12:05 ET)
Annoying park results  (Started: Oct. 17 2005, 19:04 ET, Last post: Oct. 24 2005, 21:52 ET)
Small parts = inconsistent finish
Latest project  (Started: Oct. 21 2005, 00:46 ET, Last post: Oct. 22 2005, 17:34 ET)
Remake of an older finish
What to use to get a "brushed" finish?  (Started: Oct. 1 2005, 22:30 ET, Last post: Oct. 21 2005, 10:43 ET)
Preping metal for bluing  (Started: Oct. 17 2005, 07:31 ET, Last post: Oct. 19 2005, 06:50 ET)
Question on parkerizing containers.  (Started: Sep. 10 2005, 17:38 ET, Last post: Oct. 11 2005, 23:08 ET)
Duracoat  (Started: Aug. 12 2005, 18:34 ET, Last post: Oct. 10 2005, 17:33 ET)
Good or bad
Parkerizing over blue  (Started: Oct. 9 2005, 21:33 ET, Last post: Oct. 10 2005, 17:26 ET)
Marlin model 60 alumahyde  (Started: Oct. 9 2005, 22:49 ET, Last post: Oct. 10 2005, 03:58 ET)
Refinishing a cheap find
Old shotgun needs new stock  (Started: Sep. 30 2005, 13:17 ET, Last post: Oct. 7 2005, 15:29 ET)
Help, please
Advanced anodizing  (Started: Sep. 30 2005, 00:41 ET, Last post: Oct. 2 2005, 21:20 ET)
Two-tone anodizing
Am totally at a loss urgent help need!  (Started: Sep. 18 2005, 02:02 ET, Last post: Sep. 30 2005, 10:11 ET)
Parts not parkerizing completely!!!!
Amazing!!!!  (Started: Aug. 21 2005, 17:10 ET, Last post: Sep. 29 2005, 12:13 ET)
You guys are brilliant!!!!
Anodizing kt-15-b  (Started: Sep. 24 2005, 15:04 ET, Last post: Sep. 27 2005, 01:30 ET)
Getting ready
What color green anodize dye?  (Started: Sep. 22 2005, 23:53 ET, Last post: Sep. 23 2005, 03:12 ET)
Which green looks most at home on an ar?
Old stock  (Started: Sep. 21 2005, 14:03 ET, Last post: Sep. 21 2005, 18:44 ET)
Cleaning up
Sandblasting media  (Started: Sep. 19 2005, 02:46 ET, Last post: Sep. 20 2005, 02:02 ET)
Can you reuse sandblasting media
Poor mans case harding color  (Started: Aug. 21 2005, 12:59 ET, Last post: Sep. 19 2005, 06:42 ET)
Smith & wesson factory wood grips  (Started: Sep. 13 2005, 10:34 ET, Last post: Sep. 17 2005, 07:15 ET)
Ar-15 anodizing techniques  (Started: Aug. 24 2005, 15:08 ET, Last post: Sep. 7 2005, 16:19 ET)
Developing repeatable results.
Removing painted finish on eaa bounty hunter  (Started: Sep. 5 2005, 19:32 ET, Last post: Sep. 6 2005, 19:03 ET)
Good idea or bad?  (Started: Sep. 6 2005, 01:00 ET, Last post: Sep. 6 2005, 01:37 ET)
Plating and bead blasting  (Started: Sep. 5 2005, 18:21 ET, Last post: Sep. 6 2005, 01:34 ET)
Webbing - more info  (Started: Sep. 1 2005, 17:55 ET, Last post: Sep. 2 2005, 01:11 ET)
More duracoat - spider web  (Started: Aug. 29 2005, 21:05 ET, Last post: Aug. 31 2005, 19:02 ET)
Parkerizing over nickel?  (Started: Aug. 26 2005, 15:01 ET, Last post: Aug. 26 2005, 17:42 ET)
Will it work?
Pilkington classic american rust blue  (Started: Aug. 19 2005, 21:29 ET, Last post: Aug. 25 2005, 23:53 ET)
Boron nitride electroless nickel kit from caswell  (Started: Aug. 2 2005, 03:56 ET, Last post: Aug. 18 2005, 02:19 ET)
Grip material  (Started: Aug. 16 2005, 15:33 ET, Last post: Aug. 17 2005, 17:01 ET)
I want to make gripsfor my
Help identifying this finish  (Started: Aug. 9 2005, 13:59 ET, Last post: Aug. 17 2005, 16:01 ET)
Another park experiment; cheapest yet  (Started: May 14 2005, 10:42 ET, Last post: Aug. 16 2005, 18:36 ET)
Removing phosphate finish  (Started: Aug. 11 2005, 20:36 ET, Last post: Aug. 14 2005, 17:37 ET)
Some questions on parkerizing  (Started: Jul. 31 2005, 21:44 ET, Last post: Aug. 7 2005, 18:58 ET)
Park over park?  (Started: Aug. 6 2005, 00:05 ET, Last post: Aug. 6 2005, 00:16 ET)
Phosphoric acid  (Started: Jul. 26 2005, 00:47 ET, Last post: Aug. 5 2005, 20:31 ET)
Moly resin question  (Started: Jul. 1 2005, 22:16 ET, Last post: Aug. 5 2005, 02:03 ET)
Does bottle have a shaker?
Tricks to make stain penetrate deeper?  (Started: Jul. 29 2005, 19:21 ET, Last post: Aug. 1 2005, 09:53 ET)
Aluminum black  (Started: Jul. 30 2005, 00:12 ET, Last post: Jul. 30 2005, 12:12 ET)
Black coating
Black iron wire  (Started: Jul. 25 2005, 15:12 ET, Last post: Jul. 27 2005, 11:25 ET)
What is black iron wire
Stock sealer options?  (Started: Jul. 23 2005, 20:00 ET, Last post: Jul. 26 2005, 01:22 ET)
Old school vs new school
Blue wonder?  (Started: Jul. 8 2005, 17:16 ET, Last post: Jul. 25 2005, 13:25 ET)
Prepping surfaces  (Started: Jul. 20 2005, 17:05 ET, Last post: Jul. 24 2005, 01:03 ET)
What parts do you rough up?
1st parkerizing, happy!  (Started: Jul. 22 2005, 18:58 ET, Last post: Jul. 22 2005, 19:07 ET)
Brownell's moly, help requested  (Started: Jul. 7 2005, 11:52 ET, Last post: Jul. 22 2005, 17:25 ET)
Results not turning out  (Started: Jun. 29 2005, 10:54 ET, Last post: Jul. 18 2005, 12:49 ET)
Review my parkerizing
Bluing , help me out please  (Started: Jul. 15 2005, 15:50 ET, Last post: Jul. 15 2005, 17:32 ET)
Home brewed bluing recipe
Kg guncoat v.s. lauer custom  (Started: Jul. 6 2005, 21:51 ET, Last post: Jul. 6 2005, 22:12 ET)
The toughest...money is no problem
Blotchy stock after stripping ?  (Started: Jun. 30 2005, 20:47 ET, Last post: Jun. 30 2005, 23:28 ET)
Fume bluing  (Started: Jun. 25 2005, 19:44 ET, Last post: Jun. 26 2005, 19:41 ET)
Need company to parkerize in so cal  (Started: Jun. 22 2005, 06:13 ET, Last post: Jun. 24 2005, 00:00 ET)
Herter's or pilkington's?  (Started: Jun. 21 2005, 22:14 ET, Last post: Jun. 23 2005, 14:17 ET)
Rust blue experiences?
Beginer q for handgun parkerizing  (Started: Jun. 9 2005, 18:46 ET, Last post: Jun. 21 2005, 22:01 ET)
Regarding handgun slide prep.
Home anodizing  (Started: Jun. 18 2005, 01:47 ET, Last post: Jun. 21 2005, 21:08 ET)
It gets easier
Spray and  bake finsh  (Started: Jun. 20 2005, 22:48 ET, Last post: Jun. 21 2005, 20:02 ET)
What too do to a sig 226  (Started: Jun. 18 2005, 14:21 ET, Last post: Jun. 18 2005, 14:21 ET)
Anyone know how to blacken brass?  (Started: Jun. 16 2005, 13:24 ET, Last post: Jun. 17 2005, 22:09 ET)
Do-it-your-self anodizing  (Started: Mar. 22 2005, 02:22 ET, Last post: Jun. 9 2005, 11:55 ET)
Can it be done at home?
Oak ?  (Started: May 31 2005, 12:45 ET, Last post: May 31 2005, 15:32 ET)
For revolever grips ?
Ammo can oven  (Started: Apr. 27 2005, 17:31 ET, Last post: May 28 2005, 18:30 ET)
Color case hardening.  (Started: May 20 2005, 17:41 ET, Last post: May 28 2005, 18:25 ET)
Need tips and the why & why not.
Pic of parked hammer  (Started: May 25 2005, 20:11 ET, Last post: May 28 2005, 18:18 ET)
Parking success  (Started: May 25 2005, 15:44 ET, Last post: May 25 2005, 15:44 ET)
Gun-kote  (Started: Apr. 29 2005, 12:54 ET, Last post: May 12 2005, 18:12 ET)
Info on application
Removing teflon before plating?  (Started: Apr. 29 2005, 04:26 ET, Last post: May 10 2005, 01:49 ET)
Persistent residue interferes?
Touch-up in black  (Started: Apr. 18 2005, 08:33 ET, Last post: May 2 2005, 13:40 ET)
Need advice
Paint for polymer  (Started: May 1 2005, 00:28 ET, Last post: May 1 2005, 09:59 ET)
Good paint for polymer frames
Gun kote  (Started: Mar. 18 2005, 01:15 ET, Last post: Apr. 16 2005, 00:58 ET)
Best place to order from, and how to..
Procs/cons of powdercoated frame?  (Started: Mar. 19 2005, 14:29 ET, Last post: Apr. 13 2005, 17:52 ET)
Arrow wood finish  (Started: Mar. 31 2005, 01:44 ET, Last post: Apr. 8 2005, 14:50 ET)
Anyone ever use this?
Old 10/22 stocks  (Started: Apr. 6 2005, 15:13 ET, Last post: Apr. 8 2005, 14:23 ET)
Electric pank tank options  (Started: Apr. 5 2005, 21:53 ET, Last post: Apr. 6 2005, 02:05 ET)
Stock repair  -- any tips?  (Started: Mar. 10 2005, 05:11 ET, Last post: Apr. 5 2005, 22:45 ET)
Does old blue have to be removed before reblueing?  (Started: Mar. 30 2005, 23:40 ET, Last post: Apr. 1 2005, 22:49 ET)
Blueing question?
Anodized finish thickness or depth?  (Started: Mar. 30 2005, 17:13 ET, Last post: Mar. 30 2005, 21:45 ET)
Dura coat?  (Started: Mar. 18 2005, 17:58 ET, Last post: Mar. 28 2005, 10:50 ET)
Experiences anyone?
Hard coat anodizing ?  (Started: Feb. 16 2005, 13:23 ET, Last post: Mar. 19 2005, 17:24 ET)
Springfield xd poly  frame moly resin  (Started: Mar. 15 2005, 10:45 ET, Last post: Mar. 17 2005, 16:58 ET)
Green stock  (Started: Mar. 12 2005, 20:07 ET, Last post: Mar. 15 2005, 15:47 ET)
Mosin barrel-need help  (Started: Mar. 13 2005, 15:10 ET, Last post: Mar. 13 2005, 15:10 ET)
blueing tanks  (Started: Oct. 26 2004, 20:44 ET, Last post: Mar. 11 2005, 01:49 ET)
slow rust blue formula  (Started: Aug. 7 2004, 02:10 ET, Last post: Feb. 28 2005, 13:34 ET)
xxxxx custom gun refinishing is having a special  (Started: Feb. 27 2005, 15:36 ET, Last post: Feb. 27 2005, 18:58 ET)
Home manganeze parkerizing  (Started: Jan. 25 2005, 13:20 ET, Last post: Feb. 24 2005, 19:26 ET)
For the masses
To blast or not to blast  (Started: Feb. 18 2005, 17:29 ET, Last post: Feb. 24 2005, 13:43 ET)
Can sand blasting remove anodizing?
Parkerizing misadventures  (Started: Dec. 30 2004, 16:57 ET, Last post: Feb. 21 2005, 17:11 ET)
A learning experience
Going to try to re-parkerize...  (Started: Feb. 14 2005, 22:30 ET, Last post: Feb. 16 2005, 15:23 ET)
Stock cleaner  (Started: Feb. 14 2005, 14:34 ET, Last post: Feb. 14 2005, 14:34 ET)
Black oxide ?  (Started: Feb. 10 2005, 13:26 ET, Last post: Feb. 11 2005, 06:57 ET)
Source for ss tanks  (Started: Feb. 10 2005, 22:50 ET, Last post: Feb. 10 2005, 22:50 ET)
Where to find stuff
Cast frame and slide...can i parkerize?  (Started: Feb. 7 2005, 20:11 ET, Last post: Feb. 10 2005, 15:11 ET)
Oiling after hot blue  (Started: Jan. 29 2005, 16:27 ET, Last post: Feb. 8 2005, 22:15 ET)
Who sells norrells?  (Started: Feb. 8 2005, 05:29 ET, Last post: Feb. 8 2005, 13:54 ET)
Unknown metal finish  (Started: Feb. 5 2005, 22:03 ET, Last post: Feb. 5 2005, 22:03 ET)
Need help identifying weatherby's finish
Homemade Hot Blue  (Started: Oct. 8 2004, 23:54 ET, Last post: Jan. 30 2005, 13:18 ET)
Drying a stock blank  (Started: Feb. 5 2004, 05:38 ET, Last post: Jan. 22 2005, 04:06 ET)
Color case hardening  (Started: Jan. 28 2004, 12:25 ET, Last post: Jan. 21 2005, 18:58 ET)
Can you color case harden 4140 or 4142?
More Specifics on Annodizing?  (Started: Jan. 5 2004, 09:15 ET, Last post: Jan. 17 2005, 16:20 ET)
Can i use a dremel to get off old park?  (Started: Jan. 8 2005, 21:42 ET, Last post: Jan. 10 2005, 18:14 ET)
Gun smith reviews?  (Started: Jan. 6 2005, 14:58 ET, Last post: Jan. 6 2005, 22:08 ET)
Is there such a thing?
Coating -parkerizing- metal finishes  (Started: Jan. 2 2005, 23:51 ET, Last post: Jan. 2 2005, 23:51 ET)
**********look here****************
Question About Norrell's Moly Resin  (Started: Oct. 17 2004, 14:53 ET, Last post: Jan. 1 2005, 02:08 ET)
Applying too thin?
Pre-pickling  (Started: Dec. 13 2004, 00:32 ET, Last post: Dec. 28 2004, 10:15 ET)
Matte black finish  (Started: Dec. 21 2004, 12:00 ET, Last post: Dec. 25 2004, 23:04 ET)
The place for your plating  (Started: Dec. 25 2004, 14:56 ET, Last post: Dec. 25 2004, 14:56 ET)
Bluing winchester 94  (Started: Dec. 19 2004, 05:36 ET, Last post: Dec. 24 2004, 13:11 ET)
Problems with first bluing job  (Started: Dec. 14 2004, 02:30 ET, Last post: Dec. 22 2004, 23:32 ET)
Parkerizing solution advice/help.  (Started: Dec. 20 2004, 17:59 ET, Last post: Dec. 20 2004, 17:59 ET)
Anodized AR-15 30rd magazine  (Started: Nov. 21 2004, 15:32 ET, Last post: Dec. 19 2004, 15:05 ET)
I was bored!
Re/ colt royal blue  (Started: Dec. 6 2004, 20:09 ET, Last post: Dec. 16 2004, 14:31 ET)
Bluing solution  (Started: Dec. 13 2004, 00:02 ET, Last post: Dec. 14 2004, 02:22 ET)
Something isnt right with my anodizing  (Started: Nov. 28 2004, 00:25 ET, Last post: Nov. 28 2004, 13:27 ET)
Electric blue instead of black...
Easy-Off Oven cleaner  (Started: Apr. 10 2003, 17:12 ET, Last post: Nov. 14 2004, 12:37 ET)
As a stock-finish strip??
Anodizing, Gun Kote and JB Weld questions  (Started: Aug. 22 2004, 20:58 ET, Last post: Nov. 12 2004, 17:21 ET)
oh boy...
Bluing pipe burners  (Started: Nov. 7 2004, 16:02 ET, Last post: Nov. 8 2004, 16:53 ET)
dlask parts  (Started: Oct. 17 2004, 19:28 ET, Last post: Oct. 28 2004, 22:26 ET)
homemade hot blue
Electro-Chemical Etching  (Started: Jun. 23 2004, 21:03 ET, Last post: Oct. 27 2004, 17:55 ET)
Zero artistic skill etching for firearms
reference books for metal finishing  (Started: Oct. 21 2004, 08:14 ET, Last post: Oct. 26 2004, 20:42 ET)
parkerizing a revolver  (Started: Oct. 18 2004, 17:38 ET, Last post: Oct. 26 2004, 19:39 ET)
Colt royal blue  (Started: Oct. 19 2004, 10:50 ET, Last post: Oct. 19 2004, 22:16 ET)
Homemade Hot blue  follow up  (Started: Oct. 16 2004, 00:37 ET, Last post: Oct. 18 2004, 09:00 ET)
it works!!!!
Parkerizing touch-up?  (Started: Aug. 26 2004, 14:18 ET, Last post: Oct. 15 2004, 13:58 ET)
Prior to applying gunkote/duracoat
Failed black parkerizing  (Started: May 27 2004, 11:31 ET, Last post: Oct. 15 2004, 10:17 ET)
cast frame or worn out solution?
Fords Custom Gun Refinishing has a Holiday Special  (Started: Oct. 11 2004, 17:00 ET, Last post: Oct. 11 2004, 17:00 ET)
Carbonfiber  (Started: Oct. 8 2004, 01:43 ET, Last post: Oct. 10 2004, 06:26 ET)
Stock
Heard of Caswell ?  (Started: May 16 2004, 01:02 ET, Last post: Oct. 8 2004, 23:15 ET)
GAU-2's anodizing adventure  (Started: Sep. 11 2004, 09:26 ET, Last post: Oct. 2 2004, 22:16 ET)
Cut his gums with a hunting knife
refinishing a barrell  (Started: Sep. 29 2004, 22:06 ET, Last post: Oct. 1 2004, 21:43 ET)
Parking the Garand  (Started: Sep. 13 2004, 20:43 ET, Last post: Oct. 1 2004, 19:16 ET)
Pieces that don't park?
Bluing rifle barrel or barreled action  (Started: Sep. 15 2004, 08:49 ET, Last post: Oct. 1 2004, 19:07 ET)
Artificially aging aluminum  (Started: Sep. 24 2004, 15:45 ET, Last post: Sep. 24 2004, 15:45 ET)
Aging the park solution  (Started: Sep. 18 2004, 19:39 ET, Last post: Sep. 22 2004, 15:21 ET)
WTF?
Satin finish on a wood stock  (Started: Sep. 18 2004, 15:06 ET, Last post: Sep. 21 2004, 23:27 ET)
how to obtain it
Parkerizing Solutions  (Started: Sep. 20 2004, 19:34 ET, Last post: Sep. 20 2004, 19:34 ET)
Anyone bought from phosphatesolutions
Ar receivers Anodizing  (Started: Sep. 17 2004, 17:43 ET, Last post: Sep. 19 2004, 15:00 ET)
Who Can Anodize a Kt Receiver
How to Strip poorly done spray on finish?  (Started: Sep. 14 2004, 18:54 ET, Last post: Sep. 15 2004, 12:57 ET)
Help Me!
Anodizing Ruger 10-22 receiver/trigger group  (Started: Aug. 29 2004, 20:42 ET, Last post: Sep. 1 2004, 15:46 ET)
different method because they're cast ??
Anodizing power supply  (Started: Aug. 30 2004, 16:55 ET, Last post: Sep. 1 2004, 12:16 ET)
Refinishing desert eagle  (Started: Jul. 12 2004, 17:21 ET, Last post: Aug. 29 2004, 18:56 ET)
Anodizing Equipment  (Started: Aug. 23 2004, 19:13 ET, Last post: Aug. 25 2004, 22:12 ET)
On loan for members
Anodizing Help  (Started: Aug. 22 2004, 01:19 ET, Last post: Aug. 22 2004, 18:20 ET)
Pokeberry finish  (Started: Aug. 13 2004, 09:19 ET, Last post: Aug. 20 2004, 07:59 ET)
I want to finish two pistols  (Started: Aug. 5 2004, 13:22 ET, Last post: Aug. 20 2004, 00:16 ET)
I'll probably have to paint them
parkerized finish  (Started: Aug. 9 2004, 13:51 ET, Last post: Aug. 19 2004, 16:40 ET)
buling kit  (Started: Aug. 16 2004, 20:15 ET, Last post: Aug. 17 2004, 09:40 ET)
brownells
Roderus-Spec Anodizing  (Started: Aug. 6 2004, 09:40 ET, Last post: Aug. 7 2004, 14:40 ET)
a simple, repeatable standard
"Brushed" stainless finish?  (Started: Aug. 4 2004, 00:32 ET, Last post: Aug. 4 2004, 11:15 ET)
Successful Anodizing of KT-15  (Started: Jul. 30 2004, 09:59 ET, Last post: Aug. 3 2004, 13:30 ET)
How it was done.
Dakota Finish  (Started: Jul. 29 2004, 17:34 ET, Last post: Jul. 29 2004, 17:34 ET)
Gunkote to bare metal?  (Started: Jul. 14 2004, 15:47 ET, Last post: Jul. 16 2004, 14:20 ET)
1911 beaver tail and SA magwell finish.
bbl spots advice?  (Started: Jun. 29 2004, 16:33 ET, Last post: Jul. 15 2004, 21:55 ET)
Need advice on a barrel
Who says you can't Anodize and Dye Cast Aluminum?  (Started: Jun. 30 2004, 12:53 ET, Last post: Jul. 9 2004, 22:07 ET)
Another Internet Myth Busted!
New(?) Cold Bluing Technique  (Started: Jan. 25 2004, 18:11 ET, Last post: Jun. 29 2004, 05:14 ET)
Applying Cold Blue with Scotchbrite
Deal in WI/Great Lakes area  (Started: Jun. 24 2004, 18:38 ET, Last post: Jun. 24 2004, 18:38 ET)
Blueing tanks and burner on eBay
air brush  (Started: Jun. 9 2004, 23:54 ET, Last post: Jun. 22 2004, 17:56 ET)
new air brush
Hot bluing additive  (Started: Jun. 10 2004, 07:11 ET, Last post: Jun. 10 2004, 07:11 ET)
Hot blueing gas  (Started: May 16 2004, 23:44 ET, Last post: Jun. 7 2004, 00:09 ET)
LP gas
bake on finishes  (Started: May 1 2004, 20:44 ET, Last post: Jun. 7 2004, 00:05 ET)
spraying and baking?
Pistol Grip for shotgun  (Started: Jun. 2 2004, 01:57 ET, Last post: Jun. 6 2004, 14:49 ET)
Pistol Grip for shotgun
Anodizing for cats  (Started: Jun. 3 2004, 19:06 ET, Last post: Jun. 6 2004, 08:55 ET)
Explaining it to Fluffy
Anyone ever try engraving?  (Started: Jun. 3 2004, 11:31 ET, Last post: Jun. 4 2004, 22:11 ET)
Anodizing for cats  (Started: Jun. 4 2004, 10:05 ET, Last post: Jun. 4 2004, 17:32 ET)
Part 2.
AR-15:  Is anodizing really necessary?  (Started: May 22 2004, 19:41 ET, Last post: Jun. 4 2004, 09:48 ET)
Can I just gun kote it?
pistol grip making advice and resources needed  (Started: May 21 2004, 23:31 ET, Last post: Jun. 3 2004, 11:53 ET)
Parkerizing barrels  (Started: Jan. 29 2004, 15:43 ET, Last post: May 31 2004, 00:27 ET)
Plugging each end...
Remington "High Gloss" Finish repair  (Started: May 11 2004, 09:43 ET, Last post: May 18 2004, 08:00 ET)
Is there a spray can substitute?
Norell clear moly resin  (Started: May 18 2004, 01:32 ET, Last post: May 18 2004, 01:32 ET)
Black Krome  (Started: May 14 2004, 00:30 ET, Last post: May 15 2004, 18:18 ET)
1st Time Park  (Started: May 8 2004, 16:30 ET, Last post: May 12 2004, 23:31 ET)
Misrable Failure
Remy stock  (Started: May 12 2004, 21:25 ET, Last post: May 12 2004, 21:25 ET)
A metal custom remy stock
need park components  (Started: Apr. 30 2004, 03:39 ET, Last post: May 5 2004, 08:15 ET)
Maganese Dioxide FOR PARKERIZATION  (Started: May 2 2004, 12:20 ET, Last post: May 2 2004, 12:20 ET)
Dimensional changes after anodizing  (Started: May 1 2004, 20:35 ET, Last post: May 1 2004, 20:49 ET)
Which air brush kit for KG Gunkote?  (Started: Mar. 16 2004, 01:33 ET, Last post: Apr. 30 2004, 23:27 ET)
Norrells vs. Duracoat  (Started: Apr. 27 2004, 16:25 ET, Last post: Apr. 30 2004, 04:00 ET)
powder coating?  (Started: Mar. 6 2004, 01:53 ET, Last post: Apr. 27 2004, 10:41 ET)
hardness etc
Has Anyone tried "Fusion" paint  (Started: Mar. 1 2004, 22:02 ET, Last post: Apr. 26 2004, 02:24 ET)
Fusion paint?
hardcoat anodize/nickel acetate seal  (Started: Apr. 15 2004, 12:28 ET, Last post: Apr. 20 2004, 18:20 ET)
engraving and the anodize...engrave 1st?  (Started: Apr. 15 2004, 12:27 ET, Last post: Apr. 16 2004, 14:51 ET)
Spray on Metal Finishes  (Started: Mar. 26 2004, 17:09 ET, Last post: Apr. 15 2004, 17:47 ET)
Selection of metal finishes
SEAL AND FINISH FOR MAPLE SPORTER  (Started: Apr. 8 2004, 18:50 ET, Last post: Apr. 12 2004, 20:39 ET)
ANYONE HAVE EXPERIENCE WITH MAPLE?
plating pistols  (Started: Apr. 6 2004, 00:12 ET, Last post: Apr. 6 2004, 00:12 ET)
oil wood finish  (Started: Aug. 6 2003, 19:41 ET, Last post: Mar. 28 2004, 01:16 ET)
looking for a new source
Parkerizing  (Started: Mar. 25 2004, 15:55 ET, Last post: Mar. 27 2004, 00:54 ET)
KG Gun Kote...  (Started: Nov. 5 2003, 04:29 ET, Last post: Mar. 18 2004, 06:06 ET)
It's not easy being green...
dye that will soak in under linseed oil finish?  (Started: Mar. 15 2004, 23:18 ET, Last post: Mar. 16 2004, 22:11 ET)
colouring aluminium  (Started: Mar. 10 2004, 03:00 ET, Last post: Mar. 14 2004, 20:09 ET)
aluminium blackening
Mini compressor for a blast cabinet???  (Started: Dec. 25 2003, 00:48 ET, Last post: Mar. 12 2004, 23:48 ET)
Surface prep before hot bluing  (Started: Mar. 9 2004, 10:14 ET, Last post: Mar. 10 2004, 21:02 ET)
Removing Plated Finish  (Started: Mar. 8 2004, 01:21 ET, Last post: Mar. 8 2004, 01:21 ET)
Anybody done it?
What not to coar on the frame and slide?  (Started: Mar. 5 2004, 09:24 ET, Last post: Mar. 5 2004, 23:28 ET)
Finish
Rust Blue formula?  (Started: Mar. 4 2004, 00:01 ET, Last post: Mar. 4 2004, 03:04 ET)
Anyone know how
In-the -White metal finish  (Started: Feb. 19 2004, 07:35 ET, Last post: Mar. 3 2004, 18:44 ET)
French Gray  (Started: Feb. 19 2004, 18:02 ET, Last post: Feb. 29 2004, 11:35 ET)
How to?
Acid etching  (Started: Feb. 2 2004, 13:13 ET, Last post: Feb. 26 2004, 22:43 ET)
Miracle Formula for Cleaning Wood Furniture  (Started: Feb. 23 2004, 20:28 ET, Last post: Feb. 23 2004, 20:28 ET)
Browning Recipe  (Started: Feb. 23 2004, 01:07 ET, Last post: Feb. 23 2004, 01:07 ET)
From Machinery's Shop Receipts
Hard chroming on 80%  (Started: Jul. 7 2003, 23:39 ET, Last post: Feb. 18 2004, 04:17 ET)
Is it legal?
Gunkote from Brownells  (Started: Feb. 16 2004, 21:18 ET, Last post: Feb. 16 2004, 22:15 ET)
gun coat
Brass coloring chemistry  (Started: Feb. 12 2004, 10:51 ET, Last post: Feb. 12 2004, 19:35 ET)
How to color reloading brass
parkerizing over j-b weld?  (Started: Feb. 4 2004, 18:32 ET, Last post: Feb. 5 2004, 03:02 ET)
filling in rust pits
Parkerizing build up?  (Started: Feb. 1 2004, 23:13 ET, Last post: Feb. 1 2004, 23:49 ET)
Parkerizing  (Started: Jan. 6 2004, 21:51 ET, Last post: Jan. 26 2004, 12:23 ET)
tanks
Parkerizing for the first time...  (Started: Jan. 23 2004, 13:14 ET, Last post: Jan. 23 2004, 20:54 ET)
2 quick questions, I promise!  ;)
Tool Black  (Started: Jan. 17 2004, 21:40 ET, Last post: Jan. 19 2004, 11:18 ET)
Anyone tried it?
Restoring Rem A3o3 questions....  (Started: Jan. 8 2004, 02:36 ET, Last post: Jan. 16 2004, 11:10 ET)
Stove Top Parkerizing  (Started: Jan. 10 2004, 11:33 ET, Last post: Jan. 15 2004, 15:02 ET)
Mauser 98 Bolt question  (Started: Jan. 7 2004, 23:00 ET, Last post: Jan. 13 2004, 15:35 ET)
Parkerizing bolt
What are AR receivers finished with?  (Started: Jan. 9 2004, 03:09 ET, Last post: Jan. 11 2004, 23:03 ET)
Zolatone 20  (Started: Jan. 7 2004, 23:10 ET, Last post: Jan. 7 2004, 23:10 ET)
Stock finishing
Tumbled Finish ?  (Started: Jan. 6 2004, 19:58 ET, Last post: Jan. 7 2004, 20:58 ET)
Tumbler + glass beads for lower
What pressure?  (Started: Jan. 5 2004, 19:25 ET, Last post: Jan. 6 2004, 14:41 ET)
The one?  (Started: Jan. 5 2004, 18:29 ET, Last post: Jan. 5 2004, 18:51 ET)
DuraCoat Finishing  (Started: Dec. 22 2003, 11:48 ET, Last post: Dec. 22 2003, 11:48 ET)
DuraCoat Finish Reliability
Removing Old Stain  (Started: Nov. 24 2003, 18:50 ET, Last post: Dec. 21 2003, 21:34 ET)
Opinions on HVLP guns  (Started: Dec. 16 2003, 03:10 ET, Last post: Dec. 21 2003, 00:46 ET)
cold blue  (Started: Aug. 30 2003, 01:51 ET, Last post: Dec. 18 2003, 09:10 ET)
what is the best in the market?
Rust Blueing  (Started: Oct. 26 2003, 14:24 ET, Last post: Dec. 18 2003, 09:05 ET)
re-finishing an old shotgun
Green finish?  (Started: Feb. 22 2003, 10:59 ET, Last post: Dec. 16 2003, 08:33 ET)
Wilson 1911A1 frames
Figuring Surface Area  (Started: Dec. 6 2003, 13:43 ET, Last post: Dec. 6 2003, 21:32 ET)
Parkerizing equipment questions  (Started: Nov. 26 2003, 14:05 ET, Last post: Nov. 28 2003, 18:13 ET)
Type III Anodizing  (Started: Nov. 17 2003, 03:39 ET, Last post: Nov. 20 2003, 08:20 ET)
Does refinishing a gun reduce value?  (Started: Oct. 16 2003, 16:14 ET, Last post: Nov. 18 2003, 21:42 ET)
Win Model 370
Glass Bead Size  (Started: Nov. 13 2003, 12:49 ET, Last post: Nov. 18 2003, 00:31 ET)
Electroless Nickel Discoloration  (Started: Nov. 12 2003, 17:02 ET, Last post: Nov. 17 2003, 11:21 ET)
Removeing Old Park  (Started: Nov. 4 2003, 15:36 ET, Last post: Nov. 4 2003, 19:54 ET)
Dupli Color Ceramic Paint  (Started: Oct. 24 2003, 17:04 ET, Last post: Oct. 31 2003, 01:12 ET)
Tested
Brownell's Teflon/Moly Oven Cure  (Started: Feb. 17 2003, 13:07 ET, Last post: Oct. 30 2003, 23:24 ET)
Application Experience?
My first camo job  (Started: Oct. 20 2003, 18:18 ET, Last post: Oct. 30 2003, 12:55 ET)
Treatment effects on size  (Started: Oct. 21 2003, 23:10 ET, Last post: Oct. 22 2003, 21:24 ET)
How does parkerizing/anodizing affect
Poor stock staining  (Started: Nov. 17 2002, 12:25 ET, Last post: Oct. 20 2003, 21:19 ET)
Parkerizing & Soft Solder  (Started: Oct. 18 2003, 21:08 ET, Last post: Oct. 19 2003, 18:48 ET)
Is soft solder damaged
Norrel products,  (Started: Sep. 26 2003, 19:29 ET, Last post: Oct. 17 2003, 21:34 ET)
Where to get them,
Help with anodizing???  (Started: Oct. 1 2003, 23:59 ET, Last post: Oct. 2 2003, 21:46 ET)
what to get and where to get it?
TRU-COAT  (Started: Sep. 9 2003, 20:48 ET, Last post: Sep. 27 2003, 15:44 ET)
By Wahkon Bay
Old Chrome  (Started: Sep. 24 2003, 02:45 ET, Last post: Sep. 25 2003, 11:35 ET)
Removing and Re-Chroming
Pentrate Blueing salts  (Started: Aug. 6 2003, 16:50 ET, Last post: Sep. 22 2003, 18:44 ET)
Anyone ever heard of this outfit?
Aluminum number/letter etching  (Started: Sep. 16 2003, 00:52 ET, Last post: Sep. 16 2003, 18:35 ET)
2 false starts & some promise
Brownells Dicropan IM any good ?  (Started: Sep. 14 2003, 18:10 ET, Last post: Sep. 15 2003, 13:41 ET)
k-Phos or Parkerizing  (Started: Sep. 14 2003, 11:14 ET, Last post: Sep. 14 2003, 15:28 ET)
Removing original anodizing?  (Started: Sep. 11 2003, 10:16 ET, Last post: Sep. 12 2003, 10:11 ET)
metal prep.  (Started: Sep. 10 2003, 00:47 ET, Last post: Sep. 10 2003, 13:40 ET)
steel wool or sand paper?
Best finish for the Kt 80%ers  (Started: Aug. 29 2003, 14:38 ET, Last post: Sep. 9 2003, 16:18 ET)
Blue, Park, or Paint
Anode Idea  (Started: Jul. 19 2003, 09:19 ET, Last post: Sep. 9 2003, 15:41 ET)
Moly Resin-??  (Started: Sep. 1 2003, 11:25 ET, Last post: Sep. 2 2003, 23:43 ET)
do I have to clear coat it
how to get rust out?  (Started: May 30 2003, 21:57 ET, Last post: Aug. 23 2003, 17:09 ET)
need help cleaning
Specific gravity of park solution  (Started: Aug. 23 2003, 14:11 ET, Last post: Aug. 23 2003, 14:11 ET)
Anyone know?
Filling In Slide Markings Before Finishing  (Started: Jul. 29 2003, 22:32 ET, Last post: Aug. 1 2003, 08:53 ET)
Any Ideas on what to fill markings with?
Fibergeek - Have you used the De-Smut?  (Started: Jun. 8 2003, 20:12 ET, Last post: Jul. 31 2003, 21:23 ET)
Brownells baking Lacquer  (Started: Jun. 9 2003, 09:50 ET, Last post: Jul. 20 2003, 23:30 ET)
Over parkerizing?  (Started: Jul. 13 2003, 21:41 ET, Last post: Jul. 17 2003, 19:39 ET)
She kept fizzing for 45 minutes
The Caswellplating Forums, how Sad  (Started: Jul. 16 2003, 22:32 ET, Last post: Jul. 17 2003, 12:17 ET)
The blind leading the blind
Nickel Stripping  (Started: Feb. 24 2003, 05:25 ET, Last post: Jun. 21 2003, 12:26 ET)
Manganese Phosphating PH  (Started: May 30 2003, 17:49 ET, Last post: Jun. 3 2003, 12:51 ET)
Parkerizing PH
TiN Coatings???  (Started: May 13 2003, 01:39 ET, Last post: May 28 2003, 10:24 ET)
Where do you get this done for 1 item?
first time park'n  (Started: Mar. 9 2003, 19:23 ET, Last post: May 27 2003, 13:14 ET)
easy to do
best finish for steel  (Started: May 15 2003, 11:24 ET, Last post: May 16 2003, 13:48 ET)
Want it to look like steel
Metal Finishing Book  (Started: May 7 2003, 22:17 ET, Last post: May 15 2003, 16:13 ET)
blueing,parkerizing and other coatings
Teflon/moly Finish?  (Started: May 8 2003, 12:36 ET, Last post: May 15 2003, 11:13 ET)
wood drying? what to do  (Started: May 8 2003, 11:36 ET, Last post: May 14 2003, 02:42 ET)
how do you go from tree to stock??
electroless nickel plating  (Started: May 2 2003, 14:23 ET, Last post: May 6 2003, 00:36 ET)
plating stuff..
refurbish 1911 stampings  (Started: Apr. 20 2003, 12:50 ET, Last post: Apr. 25 2003, 01:08 ET)
recommendations
Dyed receiver turns Green :(  (Started: Feb. 1 2003, 20:47 ET, Last post: Apr. 23 2003, 14:17 ET)
Camo Finish.  (Started: Apr. 15 2003, 18:33 ET, Last post: Apr. 18 2003, 11:08 ET)
My first attempt.
How would you refinish it?  (Started: Apr. 9 2003, 15:44 ET, Last post: Apr. 9 2003, 17:30 ET)
My K31 stock needs help.
Mirroring the grain  (Started: Mar. 31 2003, 15:15 ET, Last post: Mar. 31 2003, 21:15 ET)
1911 grip panels
Home made grips for pocket pistol  (Started: Mar. 26 2003, 00:40 ET, Last post: Mar. 31 2003, 15:27 ET)
Made from olive wood
Anodize Part II  (Started: Mar. 22 2003, 22:40 ET, Last post: Mar. 23 2003, 21:59 ET)
Help refinishing SP1 Upper  (Started: Mar. 10 2003, 10:19 ET, Last post: Mar. 10 2003, 12:32 ET)
from black back to Colt gray
pvc pipe park tank  (Started: Mar. 8 2003, 21:44 ET, Last post: Mar. 9 2003, 12:02 ET)
need a circulating pump
What grit/micron Glass beading prior to Anodize?  (Started: Mar. 3 2003, 22:56 ET, Last post: Mar. 4 2003, 09:26 ET)
I need barrel finishing -- inside the tube  (Started: Feb. 2 2003, 13:37 ET, Last post: Mar. 3 2003, 21:31 ET)
Metal finishing or a great barrel maker?
Need info  (Started: Dec. 17 2002, 12:24 ET, Last post: Mar. 1 2003, 15:37 ET)
Spray on coatings
Scratches in stock!  (Started: Feb. 17 2003, 19:09 ET, Last post: Feb. 24 2003, 16:37 ET)
Scratches in stock!
Bead/sand blast prior to Anodize?  (Started: Feb. 11 2003, 00:11 ET, Last post: Feb. 17 2003, 10:41 ET)
Tru-Oil  (Started: Feb. 11 2003, 14:23 ET, Last post: Feb. 17 2003, 09:28 ET)
stock job
How to do a Camo paint job.  (Started: Feb. 17 2003, 02:31 ET, Last post: Feb. 17 2003, 02:31 ET)
Any one got any tips or how to's.
GunKote?  (Started: Feb. 4 2003, 06:46 ET, Last post: Feb. 16 2003, 21:02 ET)
Spray on Moly / Teflon type metal finish  (Started: Feb. 11 2003, 00:17 ET, Last post: Feb. 12 2003, 10:16 ET)
Anyone have a suppy source in Canada
My First Parkerizing Adventure  (Started: Jan. 27 2003, 14:07 ET, Last post: Jan. 27 2003, 17:58 ET)
Parkerizing FN-FAL kits
Yet Another Anodizing Experiment  (Started: Jan. 13 2003, 12:20 ET, Last post: Jan. 18 2003, 10:57 ET)
"desmutting" and more
Anodizing a cast lower.  (Started: Jan. 6 2003, 16:25 ET, Last post: Jan. 13 2003, 11:41 ET)
diy hard chroming  (Started: Jan. 2 2003, 21:26 ET, Last post: Jan. 4 2003, 16:11 ET)
anyone know how
Finishing for Dummies  (Started: Jan. 2 2003, 12:03 ET, Last post: Jan. 2 2003, 21:54 ET)
Newbie Advice
brownells stainless finish how is it  (Started: Jan. 1 2003, 23:12 ET, Last post: Jan. 2 2003, 19:40 ET)
anodizing success  (Started: Jan. 2 2003, 11:20 ET, Last post: Jan. 2 2003, 15:18 ET)
NEW TYPE COATING( CHECK IT OUT)  (Started: Nov. 23 2002, 15:53 ET, Last post: Dec. 5 2002, 23:12 ET)
BLACK
Textured Finish  (Started: Nov. 15 2002, 22:42 ET, Last post: Dec. 5 2002, 07:01 ET)
1911 finish question
THIS GUY CAN DO A VERY NICE COATING  (Started: Dec. 4 2002, 20:00 ET, Last post: Dec. 4 2002, 20:00 ET)
INFO :
Tung Oil  (Started: Dec. 2 2002, 09:46 ET, Last post: Dec. 2 2002, 15:04 ET)
drying
Hey Bybon  (Started: Nov. 30 2002, 19:01 ET, Last post: Nov. 30 2002, 22:08 ET)
look at this
Who can tenifer my 1911 slides and frames?  (Started: Nov. 21 2002, 15:06 ET, Last post: Nov. 25 2002, 22:08 ET)
looking for a company that does this
Anodizing snafu?  (Started: Nov. 20 2002, 22:45 ET, Last post: Nov. 23 2002, 09:31 ET)
Tenifer  (Started: Nov. 12 2002, 01:11 ET, Last post: Nov. 21 2002, 08:30 ET)
Anyone know how its done?
How To Anodize Aluminum  (Started: Oct. 3 2002, 12:27 ET, Last post: Nov. 19 2002, 21:42 ET)
a good home workshop procedure
Polished Blue  (Started: Oct. 4 2002, 18:42 ET, Last post: Nov. 3 2002, 21:57 ET)
Camo  (Started: Oct. 30 2002, 14:15 ET, Last post: Nov. 1 2002, 19:12 ET)
M14 synthetic stock
question on various finishes  (Started: Oct. 30 2002, 04:10 ET, Last post: Oct. 30 2002, 21:42 ET)
for pistols
Colt gray  (Started: Oct. 21 2002, 14:49 ET, Last post: Oct. 27 2002, 21:20 ET)
Who has the best?
checkering Q's  (Started: Oct. 10 2002, 12:27 ET, Last post: Oct. 17 2002, 15:03 ET)
your parkerizing experience  (Started: Oct. 2 2002, 20:20 ET, Last post: Oct. 15 2002, 22:45 ET)
for flawless application
Norrell Moly Resin  (Started: Oct. 2 2002, 20:08 ET, Last post: Oct. 14 2002, 14:17 ET)
Finishing Sig P228
wood finishing/refinishing  (Started: Oct. 3 2002, 10:37 ET, Last post: Oct. 12 2002, 18:44 ET)
what do you use
Airbrushing a stock  (Started: Oct. 9 2002, 21:10 ET, Last post: Oct. 11 2002, 08:08 ET)
anyone ever tried it?
A fast and easy way to refinish...  (Started: Oct. 8 2002, 12:02 ET, Last post: Oct. 9 2002, 21:07 ET)
SPOILER: cheats
How to strip theh bluing?  (Started: Oct. 4 2002, 22:17 ET, Last post: Oct. 7 2002, 19:01 ET)
Citristrip  (Started: Oct. 2 2002, 22:03 ET, Last post: Oct. 3 2002, 16:46 ET)
ask and ye shall receive  (Started: Oct. 2 2002, 18:08 ET, Last post: Oct. 2 2002, 18:08 ET)
...new forum added
How about a "Finishes" forum?  (Started: Oct. 2 2002, 12:35 ET, Last post: Oct. 2 2002, 17:30 ET)