www.HomeGunsmith.com Archive
Archive Date: Apr. 13 2021, 04:00 ET
This is an archive! Click here to go to the live site.

Home > Main Forums > Home Machine Shop
I guess starrett has just given up...  (Started: Apr. 5 2021, 12:07 ET, Last post: Apr. 7 2021, 13:22 ET)
Can seam micrometer
Sinker edm  (Started: Mar. 21 2021, 22:19 ET, Last post: Apr. 4 2021, 20:14 ET)
How to use a sinker edm
Drill sharpening  (Started: Mar. 21 2021, 16:09 ET, Last post: Mar. 29 2021, 22:20 ET)
Do you sharpen your old drills?  how?
So where's everyone shopping for shop tools now?  (Started: Aug. 13 2020, 17:23 ET, Last post: Mar. 23 2021, 11:23 ET)
Seems like the good vendors are gone...
Small surface plate repeat-o-meter  (Started: Jan. 24 2021, 22:13 ET, Last post: Feb. 3 2021, 00:13 ET)
Surface grinding  (Started: Apr. 10 2019, 15:57 ET, Last post: Nov. 10 2020, 20:29 ET)
Dumb deburrrring question  (Started: Oct. 27 2020, 22:16 ET, Last post: Oct. 29 2020, 22:45 ET)
Dumb lathe question(s)  (Started: Nov. 13 2019, 14:18 ET, Last post: Sep. 24 2020, 13:50 ET)
In the right place this time
Well. look here!  (Started: Aug. 20 2020, 16:39 ET, Last post: Aug. 20 2020, 22:06 ET)
If my ship comes in  (Started: Jun. 22 2020, 18:06 ET, Last post: Aug. 6 2020, 11:09 ET)
What size lathe to buy.
Home shop management  (Started: Oct. 15 2019, 08:09 ET, Last post: Jun. 11 2020, 10:50 ET)
Jit, minimalism, just not hoarding...?
Anvil edge repaired  (Started: Apr. 23 2020, 02:43 ET, Last post: May 2 2020, 21:56 ET)
Improved functionality,  maintained hist
Welding helmets  (Started: Feb. 7 2017, 04:58 ET, Last post: Nov. 28 2019, 22:06 ET)
45-90 chamber reamer drawing  (Started: Sep. 1 2019, 08:29 ET, Last post: Oct. 25 2019, 12:32 ET)
New tool  (Started: Aug. 12 2019, 18:50 ET, Last post: Oct. 24 2019, 14:34 ET)
Slicker than deer guts on a door knob.
Oh yeah, it's bad,  (Started: Apr. 15 2012, 21:09 ET, Last post: Sep. 8 2019, 01:26 ET)
Titanium that is,
Direct indexing quick reference  (Started: Sep. 1 2019, 08:33 ET, Last post: Sep. 1 2019, 08:33 ET)
Tig welding  (Started: Aug. 11 2019, 12:02 ET, Last post: Aug. 19 2019, 09:42 ET)
Moving shop  (Started: Jun. 25 2019, 20:11 ET, Last post: Aug. 7 2019, 02:00 ET)
How did you do it?
How to make a square thread tap?  (Started: Nov. 26 2018, 11:00 ET, Last post: Jul. 28 2019, 21:06 ET)
I love when a plan comes together!  (Started: Jun. 5 2019, 12:25 ET, Last post: Jun. 16 2019, 17:06 ET)
Two piece chuck jaws  (Started: May 25 2019, 11:28 ET, Last post: May 28 2019, 03:11 ET)
Need to change my chuck jaws around
Chuck screws?  (Started: Mar. 25 2019, 22:35 ET, Last post: Mar. 27 2019, 14:06 ET)
Lathe vertical milling slides, any one using them  (Started: Feb. 3 2019, 08:40 ET, Last post: Feb. 3 2019, 16:15 ET)
Discussion of lathe milling attachments
Homemade mill, rotary table, indexer  (Started: Nov. 13 2006, 23:44 ET, Last post: Feb. 2 2019, 19:57 ET)
Duallfixafter several years ofitthingy
_please back off  (Started: Aug. 17 2018, 14:05 ET, Last post: Jan. 14 2019, 23:02 ET)
New goodies for the shop  (Started: Jan. 2 2019, 00:15 ET, Last post: Jan. 11 2019, 02:11 ET)
Bigger lathe, universal mill
Magnetic calendars  (Started: Dec. 14 2018, 22:27 ET, Last post: Dec. 15 2018, 19:27 ET)
Help find counter bore.  (Started: Sep. 18 2018, 13:59 ET, Last post: Sep. 19 2018, 16:48 ET)
Loose x axis gib  (Started: Aug. 26 2018, 10:51 ET, Last post: Aug. 26 2018, 19:39 ET)
New to me mill  (Started: Aug. 3 2018, 15:50 ET, Last post: Aug. 22 2018, 23:16 ET)
Surface plate tester  (Started: Feb. 20 2018, 01:06 ET, Last post: Aug. 17 2018, 09:15 ET)
Where tb rasp rifflers?  (Started: Jul. 22 2018, 08:35 ET, Last post: Jul. 26 2018, 13:01 ET)
3/4" 4140ht  (Started: Jul. 24 2018, 16:26 ET, Last post: Jul. 24 2018, 19:52 ET)
Ebay
Inexpensive tooling – where to buy  (Started: Feb. 20 2018, 10:02 ET, Last post: Jul. 21 2018, 14:24 ET)
Gap bed lathe  (Started: Jun. 21 2018, 14:04 ET, Last post: Jul. 19 2018, 23:15 ET)
Would you ever remove the gap insert?
Home made bumper crane repair  (Started: May 3 2018, 14:46 ET, Last post: May 12 2018, 22:38 ET)
Not gunsmithing, but 2nd opinion wanted
This old lathe... q?  (Started: Feb. 12 2018, 23:31 ET, Last post: Apr. 15 2018, 15:10 ET)
I am about to become a pest!  (Started: Apr. 2 2018, 20:35 ET, Last post: Apr. 3 2018, 20:24 ET)
Dial indicator
My new rot phase converter  (Started: Jan. 19 2018, 04:14 ET, Last post: Mar. 1 2018, 07:43 ET)
Lights????  (Started: Dec. 30 2017, 16:27 ET, Last post: Feb. 12 2018, 11:06 ET)
Need to fix the lights in the shop
How i dial in a barrel for precision work  (Started: Feb. 4 2018, 19:02 ET, Last post: Feb. 7 2018, 01:31 ET)
Fly cutter  (Started: Jan. 16 2018, 12:34 ET, Last post: Jan. 18 2018, 22:59 ET)
Homemade fy cutter
2 cutters i made  (Started: Jul. 21 2017, 10:16 ET, Last post: Jan. 18 2018, 20:40 ET)
Becoming a real pest  (Started: Feb. 25 2017, 11:26 ET, Last post: Jan. 18 2018, 14:44 ET)
Get ready i am getting a real lathe
Homemade cnc milling machine  (Started: Jan. 16 2018, 12:38 ET, Last post: Jan. 16 2018, 21:46 ET)
Finally a working video
Cool idea  (Started: Dec. 17 2017, 23:27 ET, Last post: Dec. 24 2017, 07:16 ET)
Neat vise jaws
Tilting table, milling acc.  (Started: Oct. 26 2017, 10:56 ET, Last post: Dec. 17 2017, 20:22 ET)
Engineering manual  (Started: Dec. 15 2017, 14:05 ET, Last post: Dec. 15 2017, 14:05 ET)
Jigs and fixtures  (Started: Dec. 8 2017, 09:18 ET, Last post: Dec. 8 2017, 10:38 ET)
How to cut left-hand threads  (Started: Dec. 3 2017, 20:27 ET, Last post: Dec. 3 2017, 20:56 ET)
...in case you wanted to know
Tig weld  (Started: Nov. 24 2017, 11:53 ET, Last post: Dec. 3 2017, 20:25 ET)
Money for gun parts  (Started: Oct. 13 2017, 09:28 ET, Last post: Oct. 25 2017, 20:17 ET)
Need help!!!  (Started: Apr. 29 2017, 11:42 ET, Last post: Oct. 9 2017, 10:37 ET)
Lathe needs fixed
Guess what this is  (Started: Oct. 3 2017, 08:44 ET, Last post: Oct. 5 2017, 19:22 ET)
Band saw questions  (Started: Oct. 1 2017, 23:44 ET, Last post: Oct. 3 2017, 21:26 ET)
Que. about grizzly gunsmith lathe  (Started: Sep. 28 2017, 09:22 ET, Last post: Sep. 29 2017, 17:54 ET)
Sooooo..... i've been looking for a mill  (Started: Aug. 20 2017, 11:22 ET, Last post: Sep. 21 2017, 21:09 ET)
Picked up a dro  (Started: Jul. 28 2017, 11:00 ET, Last post: Aug. 11 2017, 16:06 ET)
Mill tooling  (Started: Jul. 30 2017, 21:17 ET, Last post: Aug. 8 2017, 15:08 ET)
Lathe speed  (Started: Jul. 19 2017, 12:06 ET, Last post: Jul. 24 2017, 19:18 ET)
Threading to a shoulder
New lathe, what to buy?  (Started: Jul. 17 2017, 21:09 ET, Last post: Jul. 19 2017, 10:22 ET)
Comparator  (Started: Jun. 26 2017, 12:53 ET, Last post: Jul. 10 2017, 10:00 ET)
A letter punch jig  (Started: Jun. 13 2017, 04:27 ET, Last post: Jun. 16 2017, 12:35 ET)
Drill bits in sales flyer  (Started: Mar. 27 2017, 19:25 ET, Last post: Jun. 3 2017, 21:13 ET)
Vfd knowledge?  (Started: May 2 2017, 13:20 ET, Last post: May 30 2017, 02:40 ET)
Bought a bigger mill  (Started: Apr. 15 2017, 15:10 ET, Last post: May 27 2017, 17:42 ET)
Alphawolf would be proud of me
I consider this a fact  (Started: Apr. 22 2017, 16:00 ET, Last post: May 7 2017, 11:48 ET)
Chinese drill press  (Started: Apr. 8 2017, 14:58 ET, Last post: Apr. 16 2017, 08:52 ET)
I want the belt tensioner to work right!
I now officially hate msc.  (Started: Apr. 10 2017, 14:48 ET, Last post: Apr. 15 2017, 14:16 ET)
And don't like acu-rite much either!
Giving the shop some love  (Started: Apr. 1 2017, 22:17 ET, Last post: Apr. 3 2017, 19:42 ET)
Long overdue mill repairs/upgrades
Die filers  (Started: Mar. 18 2017, 21:23 ET, Last post: Mar. 30 2017, 19:45 ET)
A tale of two die filers
How to hob gears electronically  (Started: Jan. 30 2017, 21:43 ET, Last post: Mar. 1 2017, 11:34 ET)
Gear generation via electronic gears
Wiggle stick  (Started: Feb. 28 2017, 19:48 ET, Last post: Feb. 28 2017, 20:11 ET)
A quick lathe wiggler
Ultimate tap wrench?  (Started: Nov. 7 2016, 20:09 ET, Last post: Feb. 6 2017, 16:25 ET)
We'll see - i hope so...
Soft jaws  (Started: Jan. 22 2017, 18:44 ET, Last post: Jan. 23 2017, 17:10 ET)
Rookie soft jaw manufacture
Grizzly t25937 5" rotary table with 4 jaw & index  (Started: Nov. 29 2016, 19:20 ET, Last post: Dec. 10 2016, 13:50 ET)
Review?unboxing?reports
Can a rough endmill cut serrations?  (Started: Nov. 29 2016, 15:07 ET, Last post: Dec. 1 2016, 12:39 ET)
3" rotary table for lathe radius turner.  (Started: Nov. 30 2016, 09:37 ET, Last post: Dec. 1 2016, 07:39 ET)
Single point thread mills for back chamfer?  (Started: Nov. 24 2016, 08:50 ET, Last post: Nov. 26 2016, 12:04 ET)
Copy carver  (Started: Nov. 22 2016, 14:12 ET, Last post: Nov. 24 2016, 08:24 ET)
Cutting back radius on ar-15 style lower  (Started: Nov. 17 2016, 00:27 ET, Last post: Nov. 22 2016, 21:41 ET)
Will a 3/8" corner round do it?
Interrupted threads  (Started: Nov. 16 2016, 15:48 ET, Last post: Nov. 18 2016, 15:29 ET)
Oh boy oh boy!
Poor mans lathe indexer?  (Started: Nov. 18 2016, 12:18 ET, Last post: Nov. 18 2016, 15:16 ET)
What do you think.
Brownells case hardening  compound.  (Started: Nov. 9 2016, 15:05 ET, Last post: Nov. 10 2016, 07:43 ET)
Thoughts?
Import indexable  tooling  (Started: Oct. 24 2016, 08:23 ET, Last post: Oct. 24 2016, 08:23 ET)
Shop on a budget
Surface grinder  (Started: Oct. 3 2016, 05:00 ET, Last post: Oct. 21 2016, 11:28 ET)
How to balance a wheel grinder
Lathe threading issue  (Started: Sep. 7 2016, 19:57 ET, Last post: Sep. 19 2016, 18:16 ET)
Mecahnical failure?
Turning 1045  (Started: Sep. 11 2016, 22:43 ET, Last post: Sep. 13 2016, 03:47 ET)
This sure is ugly!
G0782 lathe review  (Started: Sep. 12 2016, 21:34 ET, Last post: Sep. 12 2016, 21:34 ET)
Threading in a hole  (Started: Feb. 20 2015, 14:07 ET, Last post: Sep. 5 2016, 15:08 ET)
(on the backside!)
Y axis issue  (Started: Aug. 31 2016, 20:50 ET, Last post: Sep. 3 2016, 17:11 ET)
Problem with my vise?
Lathe center height tool  (Started: Aug. 12 2016, 20:07 ET, Last post: Aug. 26 2016, 09:11 ET)
How to make your lathe 50% less useful...  (Started: Jul. 21 2016, 16:18 ET, Last post: Aug. 26 2016, 02:21 ET)
Essential skills
Lathe leveling risers  (Started: Aug. 23 2012, 18:58 ET, Last post: Jul. 31 2016, 17:17 ET)
Cheap
Indexible boring bar screws  (Started: Jul. 24 2016, 13:10 ET, Last post: Jul. 25 2016, 15:59 ET)
Goodbye to enco  (Started: Jul. 20 2016, 01:03 ET, Last post: Jul. 21 2016, 10:13 ET)
Portable tool and vise holder  (Started: Jul. 16 2016, 17:52 ET, Last post: Jul. 16 2016, 17:52 ET)
For the wannabe barrel makers.  (Started: Jul. 5 2016, 18:27 ET, Last post: Jul. 5 2016, 18:27 ET)
I need a 6/25" independent 4-jaw...  (Started: Jun. 28 2016, 16:55 ET, Last post: Jul. 2 2016, 08:11 ET)
Sick 'em speerchucker!
Cutting backplate for er collet chuck  (Started: Jan. 20 2016, 18:43 ET, Last post: Jun. 27 2016, 03:22 ET)
Does this sound reasonable?
New lathe wisdom wanted.  (Started: Jun. 22 2016, 00:20 ET, Last post: Jun. 26 2016, 02:48 ET)
Grizzly southbend okay?
Massive indexable lathe tooling...  (Started: Jun. 22 2016, 15:31 ET, Last post: Jun. 22 2016, 19:34 ET)
I hear carbide really removes material
Hardness testing  (Started: May 4 2016, 17:53 ET, Last post: May 6 2016, 21:43 ET)
What are the caveats?  how do i...?
Old lathe threading issues resolved  (Started: Apr. 13 2016, 16:01 ET, Last post: Apr. 15 2016, 14:48 ET)
Identifying an unknown heat treatable steel?  (Started: Apr. 3 2016, 18:12 ET, Last post: Apr. 11 2016, 02:44 ET)
My new-old shop  (Started: Apr. 5 2016, 07:42 ET, Last post: Apr. 5 2016, 21:07 ET)
Cnc mill build  (Started: Jul. 26 2015, 09:59 ET, Last post: Mar. 28 2016, 22:47 ET)
Dammit alpha!  (Started: Feb. 25 2016, 18:34 ET, Last post: Mar. 27 2016, 19:30 ET)
This is your fault!
Comparator  (Started: Mar. 17 2016, 18:22 ET, Last post: Mar. 18 2016, 12:30 ET)
Rockwell tester, take two  (Started: Jul. 11 2015, 01:43 ET, Last post: Mar. 14 2016, 21:04 ET)
What is it?  (Started: Feb. 15 2016, 12:43 ET, Last post: Feb. 19 2016, 16:28 ET)
Shop tool
Super spacer  (Started: Feb. 11 2016, 18:57 ET, Last post: Feb. 14 2016, 20:20 ET)
With worm drive
Let there be light!  (Started: Feb. 8 2016, 19:18 ET, Last post: Feb. 9 2016, 19:30 ET)
Finally!  satisfactory mill lighting
Er40 collet rack  (Started: Jan. 30 2016, 14:42 ET, Last post: Jan. 31 2016, 14:42 ET)
Cause i couldn't buy one...
Er collet chucks  (Started: Jan. 15 2016, 17:49 ET, Last post: Jan. 18 2016, 20:00 ET)
Help me outfit my lathe
Junkyard metal lathe  (Started: Nov. 7 2015, 18:24 ET, Last post: Dec. 24 2015, 21:08 ET)
Enco three jaw chuck  (Started: Dec. 18 2015, 19:14 ET, Last post: Dec. 19 2015, 17:50 ET)
Three jaw chuck issues
Dividing head  (Started: Nov. 25 2015, 16:26 ET, Last post: Nov. 26 2015, 10:39 ET)
X-ray spectrometry question  (Started: Nov. 3 2015, 10:28 ET, Last post: Nov. 11 2015, 21:44 ET)
Bench top mill  (Started: Jul. 23 2008, 16:30 ET, Last post: Oct. 17 2015, 18:06 ET)
Er11  (Started: Sep. 20 2015, 20:31 ET, Last post: Sep. 20 2015, 20:33 ET)
Extension collets
Finally gonna fix my tail stock  (Started: Aug. 29 2015, 18:47 ET, Last post: Aug. 30 2015, 20:56 ET)
It's only been 5 years
Question about relining a rifle barrel  (Started: Aug. 25 2015, 16:34 ET, Last post: Aug. 27 2015, 03:56 ET)
Ques. about rebuildable air cyl.s  (Started: Aug. 2 2015, 18:28 ET, Last post: Aug. 4 2015, 21:57 ET)
Look what followed me home  (Started: Jul. 12 2015, 19:27 ET, Last post: Jul. 30 2015, 22:41 ET)
In with new out with old
My new milling machine  (Started: Feb. 5 2015, 14:45 ET, Last post: Jul. 26 2015, 09:17 ET)
Tell me about mig gas  (Started: May 15 2015, 03:26 ET, Last post: Jun. 2 2015, 20:10 ET)
Two peice lathe jaws  (Started: Mar. 13 2015, 01:27 ET, Last post: May 13 2015, 02:04 ET)
How ya work these things?
2x72 belt grinder  (Started: Jan. 3 2015, 16:18 ET, Last post: Apr. 19 2015, 20:58 ET)
From parts kit
Indexable mill toolingmm2015  (Started: Mar. 25 2015, 21:30 ET, Last post: Mar. 30 2015, 18:42 ET)
Glacern any good?
Four jaw chuck issues  (Started: Mar. 24 2015, 09:58 ET, Last post: Mar. 25 2015, 16:11 ET)
What a bummer!  (Started: Mar. 4 2015, 18:10 ET, Last post: Mar. 21 2015, 13:48 ET)
Beautiful machine destroyed
Wavy parallels  (Started: Mar. 6 2015, 14:54 ET, Last post: Mar. 16 2015, 09:08 ET)
How to use?
Don't buy cheap cutters!  (Started: Mar. 8 2015, 14:37 ET, Last post: Mar. 12 2015, 07:42 ET)
When will i learn?
Worn table  (Started: Feb. 15 2015, 23:19 ET, Last post: Mar. 5 2015, 17:01 ET)
What to do?
Collet nuts - er32m vs er32um  (Started: Mar. 2 2015, 09:54 ET, Last post: Mar. 2 2015, 17:42 ET)
What is the difference if any
Putting a shop back together  (Started: Feb. 19 2015, 19:47 ET, Last post: Mar. 2 2015, 12:31 ET)
Enco 25% off sale  (Started: Feb. 25 2015, 16:13 ET, Last post: Feb. 27 2015, 19:29 ET)
Today only
Carbide vs. hss  (Started: Jan. 12 2015, 20:43 ET, Last post: Feb. 24 2015, 18:14 ET)
Avoiding further threadjacking
Help  (Started: Feb. 16 2015, 11:23 ET, Last post: Feb. 16 2015, 11:23 ET)
New toy  (Started: Sep. 16 2014, 22:43 ET, Last post: Feb. 15 2015, 16:50 ET)
Grizzly lathe help!  (Started: Feb. 9 2015, 08:16 ET, Last post: Feb. 11 2015, 06:31 ET)
New lathe chuck question  (Started: Sep. 13 2014, 16:28 ET, Last post: Feb. 8 2015, 02:40 ET)
Help with a new chuck purchase
Tailstock alignment  (Started: Jan. 31 2015, 20:43 ET, Last post: Feb. 1 2015, 15:17 ET)
What type toolpost do you use?  (Started: Jan. 1 2009, 11:58 ET, Last post: Feb. 1 2015, 00:48 ET)
Quick change or lantern / rocker
Ferro mill?  (Started: Jan. 21 2015, 13:04 ET, Last post: Jan. 27 2015, 00:21 ET)
Used mill
My best deal yet!  (Started: Aug. 21 2014, 17:53 ET, Last post: Jan. 11 2015, 02:01 ET)
Scissor  (Started: Jan. 9 2015, 13:01 ET, Last post: Jan. 9 2015, 15:15 ET)
Lift
Rotary tables  (Started: Dec. 28 2014, 09:05 ET, Last post: Dec. 29 2014, 15:21 ET)
Has anyone ever used this one....
Minilathe speed control weird problem  (Started: May 10 2014, 19:35 ET, Last post: Dec. 18 2014, 23:42 ET)
Deep drilling  (Started: Oct. 16 2014, 14:34 ET, Last post: Dec. 17 2014, 20:17 ET)
In mill
Mini pallet clamps  (Started: Dec. 7 2014, 15:08 ET, Last post: Dec. 12 2014, 11:13 ET)
Quick project
I want one of these  (Started: Oct. 18 2014, 09:19 ET, Last post: Nov. 21 2014, 08:44 ET)
1900s barn find lathe  (Started: Oct. 18 2014, 04:27 ET, Last post: Oct. 20 2014, 17:54 ET)
Spindle play = taper?  (Started: Sep. 28 2014, 00:13 ET, Last post: Sep. 29 2014, 16:19 ET)
Travadial  (Started: Sep. 27 2014, 04:19 ET, Last post: Sep. 28 2014, 11:28 ET)
New plasma cutter  (Started: Aug. 11 2014, 23:16 ET, Last post: Sep. 22 2014, 20:28 ET)
Mini mill upgrades revisited  (Started: Aug. 25 2014, 16:26 ET, Last post: Sep. 18 2014, 22:09 ET)
X-2 improvements
Anyone have this mill?  (Started: Aug. 25 2014, 18:14 ET, Last post: Sep. 2 2014, 22:38 ET)
Machining cast iron  (Started: Aug. 29 2014, 20:06 ET, Last post: Sep. 2 2014, 22:09 ET)
Machining cast iron
Tailstock alignment issue  (Started: Aug. 19 2014, 01:12 ET, Last post: Aug. 20 2014, 12:24 ET)
Vertical tailstock alignment issue
Drill bit troubleshooting  (Started: Aug. 3 2014, 23:55 ET, Last post: Aug. 12 2014, 11:26 ET)
Cutting only on one side?
Dro  (Started: Aug. 11 2014, 13:44 ET, Last post: Aug. 11 2014, 22:00 ET)
Woe's
Help me mr. wizard!  (Started: Jul. 19 2014, 14:36 ET, Last post: Aug. 11 2014, 09:08 ET)
Cheap tooling question
Leveling my crookedy type lathe  (Started: Jul. 30 2014, 17:38 ET, Last post: Aug. 6 2014, 03:39 ET)
A cry for help!
Cutting fine threads  (Started: Jul. 25 2014, 21:55 ET, Last post: Aug. 3 2014, 11:01 ET)
Lathe chambering speed  (Started: Jul. 30 2014, 00:05 ET, Last post: Jul. 31 2014, 04:09 ET)
What's foo fast?
Er40 lathe chuck  (Started: Jul. 27 2014, 13:26 ET, Last post: Jul. 28 2014, 19:09 ET)
Er40 lathe chuck
8 tpi threads on the 0602 lathe  (Started: Jul. 28 2014, 00:44 ET, Last post: Jul. 28 2014, 09:50 ET)
8 tpi threads on the 0602 lathe
Lathe backplates/camlock chucks  (Started: Jul. 27 2014, 12:59 ET, Last post: Jul. 28 2014, 03:41 ET)
What i think i know...
Machine level-ness  (Started: Jul. 25 2014, 23:47 ET, Last post: Jul. 26 2014, 21:47 ET)
Leveling mills and lathes
Good cutting oil  (Started: Apr. 13 2014, 10:52 ET, Last post: Jul. 25 2014, 19:25 ET)
Question on thread class & fit  (Started: Jul. 23 2014, 23:26 ET, Last post: Jul. 24 2014, 19:30 ET)
Round column vs. dovetail on mill  (Started: Jul. 14 2014, 12:51 ET, Last post: Jul. 23 2014, 16:01 ET)
Edge finder advice  (Started: Jun. 21 2014, 17:21 ET, Last post: Jul. 12 2014, 21:25 ET)
Looking to buy an edge finder
Mini milling machine  (Started: Feb. 20 2014, 22:07 ET, Last post: Jul. 11 2014, 02:17 ET)
I am looking for a milling machine
Building a lathe spindle  (Started: Jul. 2 2014, 07:07 ET, Last post: Jul. 7 2014, 20:35 ET)
How often change comp. oil?  (Started: Jul. 5 2014, 12:09 ET, Last post: Jul. 7 2014, 15:12 ET)
Clausing 13x36 c13  (Started: Jun. 8 2014, 11:27 ET, Last post: Jun. 26 2014, 01:34 ET)
Compound q
Machine work without machine tools  (Started: Jun. 22 2014, 09:54 ET, Last post: Jun. 22 2014, 22:36 ET)
Horizontal milling  (Started: Oct. 22 2013, 21:18 ET, Last post: Jun. 16 2014, 08:04 ET)
Inexpensive dro  (Started: Jan. 22 2014, 18:11 ET, Last post: Jun. 15 2014, 13:25 ET)
Diy dro for cheap
Looking for a small shop lathe  (Started: May 13 2014, 21:03 ET, Last post: Jun. 7 2014, 14:24 ET)
Lathe for a shop
Adding l0 backplate to a1-6 chuck  (Started: Jun. 4 2014, 00:49 ET, Last post: Jun. 7 2014, 03:47 ET)
Need fuses  (Started: May 19 2014, 20:25 ET, Last post: May 22 2014, 23:17 ET)
Sometimes being a bottom feeder pays off...  (Started: May 10 2014, 17:24 ET, Last post: May 20 2014, 01:13 ET)
Clausing lathe  (Started: May 18 2014, 17:54 ET, Last post: May 19 2014, 13:00 ET)
Followed me home
Dro 's for grizzly mini mill  (Started: Nov. 13 2013, 00:10 ET, Last post: May 15 2014, 04:05 ET)
Junked a drill press  (Started: May 7 2014, 08:37 ET, Last post: May 12 2014, 02:26 ET)
I'm a sick puppy  (Started: Mar. 14 2014, 12:44 ET, Last post: May 8 2014, 22:22 ET)
Some stuff on offhand grinding  (Started: Apr. 13 2014, 19:47 ET, Last post: Apr. 26 2014, 10:09 ET)
Tools, wheels and techniques
Millrite  (Started: Mar. 23 2014, 20:11 ET, Last post: Apr. 8 2014, 09:34 ET)
Is this a good deal?
Air compressor  (Started: Feb. 24 2014, 19:58 ET, Last post: Mar. 28 2014, 18:51 ET)
Removeing moisture
Page-lewis help  (Started: Mar. 27 2014, 20:37 ET, Last post: Mar. 27 2014, 22:17 ET)
Milling question
1/4 scale 1857 napoleon  (Started: Mar. 16 2014, 16:41 ET, Last post: Mar. 27 2014, 10:57 ET)
Help machining the bore
Now i've done it...dragged mill home from auction  (Started: Dec. 19 2013, 01:02 ET, Last post: Mar. 20 2014, 16:07 ET)
Got me another mill...
Tigzilla  (Started: Feb. 24 2014, 22:16 ET, Last post: Feb. 26 2014, 22:28 ET)
Hf capacitors in "new" 1950's welder
Got a granite knee to compliment surface plate  (Started: Feb. 21 2014, 07:48 ET, Last post: Feb. 23 2014, 12:40 ET)
My edm "build" project  (Started: Feb. 16 2014, 15:51 ET, Last post: Feb. 18 2014, 09:22 ET)
Anyone interested in a mini-mill ??? norcal  (Started: Jan. 19 2014, 19:57 ET, Last post: Feb. 17 2014, 18:58 ET)
Slick multi-position vise/table  (Started: Feb. 12 2014, 00:25 ET, Last post: Feb. 14 2014, 20:11 ET)
Another project for the to-do list!
Lathe chuck, too heavy?  (Started: Feb. 2 2014, 09:11 ET, Last post: Feb. 9 2014, 12:50 ET)
How do i drill and mill a 4130 steel?  (Started: Jan. 27 2014, 11:11 ET, Last post: Jan. 31 2014, 19:36 ET)
Newbie problems
Shaper madness  (Started: Jan. 29 2014, 14:43 ET, Last post: Jan. 30 2014, 16:48 ET)
Look what followed me home
Harbor freight 6x26 mill  (Started: Apr. 19 2012, 00:00 ET, Last post: Jan. 30 2014, 11:21 ET)
An offer i couldn't refuse!
Parts for hf mini lathe  (Started: Jan. 17 2014, 22:44 ET, Last post: Jan. 19 2014, 01:46 ET)
Adding dro to mill drill  (Started: Jan. 10 2014, 16:21 ET, Last post: Jan. 13 2014, 18:44 ET)
Need some idea's
I've really screwed up my nichols table now...  (Started: Dec. 24 2013, 00:30 ET, Last post: Jan. 5 2014, 23:49 ET)
Auctions  (Started: Jan. 1 2014, 01:34 ET, Last post: Jan. 5 2014, 16:56 ET)
Mini lathe and mini mill  (Started: Jan. 16 2013, 09:37 ET, Last post: Jan. 4 2014, 13:20 ET)
What type work can actually be done...
Mill lathe  (Started: Dec. 17 2013, 00:42 ET, Last post: Jan. 1 2014, 10:23 ET)
Bridgeport series ii  (Started: Dec. 21 2013, 14:32 ET, Last post: Dec. 27 2013, 00:09 ET)
To buy or not to buy.
Best way to prevent surface rust on ways?  (Started: Jan. 13 2013, 09:12 ET, Last post: Dec. 17 2013, 22:53 ET)
I have tried vactra and iso 68..
Lathe coolant  (Started: Nov. 26 2013, 15:45 ET, Last post: Dec. 13 2013, 21:06 ET)
Question for thought?  (Started: Nov. 23 2013, 10:43 ET, Last post: Nov. 26 2013, 20:13 ET)
Adding a dro to an x2 mini-mill  (Started: Oct. 25 2009, 17:27 ET, Last post: Nov. 14 2013, 15:51 ET)
One way to do it...
Inserts  (Started: Nov. 3 2013, 23:40 ET, Last post: Nov. 5 2013, 04:40 ET)
How do i make a holder
Tooling questions  (Started: Oct. 21 2013, 16:37 ET, Last post: Nov. 3 2013, 23:22 ET)
Home built edm  (Started: Oct. 24 2013, 10:01 ET, Last post: Oct. 27 2013, 10:59 ET)
3 jaw chuck question...  (Started: Oct. 17 2013, 22:25 ET, Last post: Oct. 21 2013, 21:49 ET)
Acceptable tolerances.
Which stainless do i use?  (Started: Sep. 22 2013, 17:58 ET, Last post: Oct. 15 2013, 18:54 ET)
Making some rifle sights
Grizzly g9972z 11x26 lathe  (Started: Sep. 6 2013, 18:55 ET, Last post: Oct. 15 2013, 08:54 ET)
Anyone here have one?
My new toy!  (Started: Oct. 4 2013, 18:34 ET, Last post: Oct. 6 2013, 08:04 ET)
Stamps  (Started: Sep. 22 2013, 22:07 ET, Last post: Sep. 24 2013, 10:22 ET)
Best welder for gunsmith work  (Started: Aug. 30 2013, 11:35 ET, Last post: Aug. 31 2013, 19:08 ET)
R8 milling cutter with other than 7/16unf  (Started: Jul. 27 2013, 03:24 ET, Last post: Jul. 28 2013, 22:09 ET)
Tungaloy inserts  (Started: Jul. 11 2013, 22:36 ET, Last post: Jul. 12 2013, 01:38 ET)
Carbide inserts on chromoly
Lathe restoration and modification  (Started: Jul. 2 2013, 09:08 ET, Last post: Jul. 8 2013, 18:55 ET)
Cement base for a minimill  (Started: Jan. 23 2013, 22:26 ET, Last post: Jul. 1 2013, 06:51 ET)
Will it work???
Oil for mill  (Started: Jun. 23 2013, 15:43 ET, Last post: Jun. 30 2013, 19:28 ET)
Oil was spilled now what?
Darn lathe chuck..  (Started: May 5 2013, 09:00 ET, Last post: Jun. 20 2013, 19:19 ET)
Lathe for blueprinting action  (Started: Jun. 16 2013, 14:25 ET, Last post: Jun. 20 2013, 18:38 ET)
Lathe for blueprinting action
Cutting bolt cams  (Started: Oct. 24 2012, 10:01 ET, Last post: Jun. 16 2013, 12:43 ET)
How about a universal cam/spiral jig?
Which is more versatile?  (Started: Jul. 21 2011, 21:20 ET, Last post: Jun. 5 2013, 23:13 ET)
Which machine is better all around?
How it used to be  (Started: May 11 2013, 19:15 ET, Last post: May 13 2013, 21:07 ET)
Excellent video of an old machine shop
3 axis dro for grizzly g9729?  (Started: Apr. 13 2013, 02:40 ET, Last post: May 6 2013, 00:13 ET)
Tramming my sherline mill....  (Started: Apr. 16 2013, 22:18 ET, Last post: Apr. 20 2013, 12:16 ET)
Are full sized ones easier?
Diy coolant pump  (Started: Apr. 14 2013, 11:41 ET, Last post: Apr. 14 2013, 21:04 ET)
Wanting to upgrade my calipers....  (Started: Mar. 4 2013, 15:05 ET, Last post: Mar. 17 2013, 18:45 ET)
Brand suggestions?
Yet another po'boy shop tool  (Started: Feb. 16 2013, 17:00 ET, Last post: Feb. 20 2013, 00:13 ET)
Mill vise this time
Chambering on a 7x10 lathe...  (Started: Jan. 29 2013, 21:21 ET, Last post: Feb. 18 2013, 01:56 ET)
Can it be done?
How far can you twist an allen wrench?  (Started: Feb. 14 2013, 18:02 ET, Last post: Feb. 15 2013, 16:02 ET)
Fire and smoke!!!!!  (Started: Feb. 1 2013, 16:09 ET, Last post: Feb. 2 2013, 19:29 ET)
How i fried my mini lathe.....
Lathe chuck question  (Started: Jan. 28 2013, 21:42 ET, Last post: Feb. 1 2013, 17:40 ET)
Scroll or independent?
Gorton 3u pantograph  (Started: Jan. 19 2013, 10:26 ET, Last post: Jan. 20 2013, 20:15 ET)
Is it worth it???
L00 jacobs rubber flex collet chuck set  (Started: Jan. 20 2013, 12:20 ET, Last post: Jan. 20 2013, 12:20 ET)
Any extremely helpful uses?
Lathe cutter  (Started: Jan. 14 2013, 12:46 ET, Last post: Jan. 16 2013, 17:19 ET)
Small boring bar adapter sleeves  (Started: Jan. 5 2013, 20:32 ET, Last post: Jan. 13 2013, 10:25 ET)
1/8" to 5/8" buy or turn?
Dro.... on the cheap  (Started: Dec. 28 2012, 16:10 ET, Last post: Jan. 6 2013, 09:28 ET)
Will probably not use a lot
Broaching head  (Started: Jan. 19 2012, 14:10 ET, Last post: Jan. 4 2013, 18:29 ET)
Arm strong powered
Dro woes  (Started: Nov. 21 2012, 21:08 ET, Last post: Dec. 30 2012, 18:25 ET)
In need of professional help
Bridgeport spindle taper  (Started: Dec. 11 2012, 20:45 ET, Last post: Dec. 28 2012, 15:45 ET)
Need to verify taper
Post your shop photos  (Started: Dec. 15 2012, 12:48 ET, Last post: Dec. 18 2012, 01:15 ET)
8620  (Started: Dec. 9 2012, 11:45 ET, Last post: Dec. 11 2012, 02:29 ET)
Good stuff,
Cutting metric threads  (Started: Nov. 28 2012, 13:49 ET, Last post: Dec. 3 2012, 02:24 ET)
Shop equipment purchasing  (Started: Nov. 27 2012, 11:42 ET, Last post: Nov. 28 2012, 09:00 ET)
Should i buy 1 2 or 3 pieces?
Collet closer  (Started: Jan. 12 2012, 15:26 ET, Last post: Nov. 17 2012, 01:12 ET)
Cams, and levers, oh my!
Mill or drill ???  (Started: Nov. 13 2012, 22:05 ET, Last post: Nov. 15 2012, 16:59 ET)
Hole thru 3.5 inch thick slab
Another po'boy shop tool  (Started: Oct. 18 2012, 13:17 ET, Last post: Oct. 20 2012, 16:43 ET)
Simple rotary table
Stuck screw on indexable tooling.  (Started: Sep. 14 2012, 21:44 ET, Last post: Oct. 10 2012, 00:38 ET)
Drilling deep holes through 1" shaft  (Started: Sep. 5 2012, 16:35 ET, Last post: Sep. 20 2012, 11:10 ET)
Vice jaws  (Started: Sep. 14 2012, 17:22 ET, Last post: Sep. 14 2012, 17:41 ET)
Mini lathe 4 jaw chuck, 3" or 4"  (Started: Sep. 7 2012, 19:11 ET, Last post: Sep. 10 2012, 19:17 ET)
Tinker cutter grinder  (Started: Aug. 4 2012, 14:32 ET, Last post: Aug. 27 2012, 09:15 ET)
Looking for cnc machinist  (Started: Aug. 7 2012, 13:21 ET, Last post: Aug. 12 2012, 11:01 ET)
Need to talk to cnc home machinist
Got a new mill!  (Started: Jul. 15 2012, 17:29 ET, Last post: Jul. 18 2012, 15:08 ET)
Some interesting stuff on rotary broaching  (Started: Jun. 23 2011, 02:30 ET, Last post: Jul. 16 2012, 16:47 ET)
Share my joy   it' xmas in june  (Started: Jun. 20 2012, 00:21 ET, Last post: Jun. 26 2012, 12:44 ET)
Going to look at a used lathe soon....  (Started: May 13 2012, 18:55 ET, Last post: May 14 2012, 01:08 ET)
Want to make sure what i'm looking at!
Got me-self a mill!  (Started: Apr. 22 2012, 20:19 ET, Last post: Apr. 30 2012, 19:05 ET)
Too bad i can't get it off the trailer:(
Indexable end mill vs. face mill  (Started: Apr. 24 2012, 14:47 ET, Last post: Apr. 25 2012, 01:12 ET)
Tpg inserts
Free collet  (Started: Apr. 22 2012, 23:51 ET, Last post: Apr. 22 2012, 23:51 ET)
Homemade metal bender.mov  (Started: Jan. 31 2012, 15:38 ET, Last post: Apr. 17 2012, 19:26 ET)
Non gun related but i like it
Lathe setup  (Started: Apr. 12 2012, 17:18 ET, Last post: Apr. 16 2012, 15:19 ET)
Is this going to be good enough?
Benchtop drill press modification  (Started: Apr. 16 2012, 12:40 ET, Last post: Apr. 16 2012, 12:40 ET)
New one on me.
Rivett 918 lathe  (Started: Apr. 7 2012, 14:12 ET, Last post: Apr. 8 2012, 11:38 ET)
5/8 - 20 un  (Started: Jan. 22 2012, 20:20 ET, Last post: Apr. 8 2012, 09:35 ET)
Home built tap
Southbend heavy 10  (Started: Mar. 29 2012, 11:02 ET, Last post: Apr. 1 2012, 02:23 ET)
Another "whats it worth" thread
A good day  (Started: Mar. 31 2012, 17:32 ET, Last post: Mar. 31 2012, 17:32 ET)
Picked up a lathe
Adcock & shipley 1es  (Started: Mar. 26 2012, 23:06 ET, Last post: Mar. 27 2012, 10:57 ET)
Adcock & shipley 1es
Threading problem  (Started: Mar. 26 2012, 23:46 ET, Last post: Mar. 27 2012, 01:45 ET)
Gearing
Remington receiver anodizing  (Started: Mar. 17 2012, 09:06 ET, Last post: Mar. 17 2012, 11:07 ET)
Air compressor aggravation  (Started: Feb. 29 2012, 15:00 ET, Last post: Mar. 12 2012, 09:26 ET)
For rookies are taig mills worth the extra $  (Started: Mar. 8 2012, 16:09 ET, Last post: Mar. 11 2012, 17:28 ET)
Working with plastics  (Started: Mar. 28 2010, 19:42 ET, Last post: Mar. 10 2012, 19:50 ET)
Maching
Lathe chuck question/issue  (Started: Mar. 1 2012, 23:58 ET, Last post: Mar. 10 2012, 14:55 ET)
It's not true, not even close.
For rookies are taig mills worth the extra $  (Started: Mar. 8 2012, 15:52 ET, Last post: Mar. 9 2012, 01:06 ET)
What i got at auction.  (Started: Dec. 6 2011, 08:45 ET, Last post: Mar. 2 2012, 19:53 ET)
Frustrating ebay experience  (Started: Feb. 17 2012, 21:17 ET, Last post: Mar. 2 2012, 13:22 ET)
Almost bought a mill
Some of you might find this interesting  (Started: Feb. 20 2012, 13:54 ET, Last post: Feb. 21 2012, 18:13 ET)
Steam engine made from gemstones
Rifling barrels  (Started: Feb. 13 2012, 03:01 ET, Last post: Feb. 14 2012, 13:52 ET)
A how it is done videos post
Rifling barrels  (Started: Feb. 13 2012, 03:03 ET, Last post: Feb. 13 2012, 20:29 ET)
A how it is done videos and links post
Machining a revolver cylinder vid  (Started: Jan. 30 2012, 05:55 ET, Last post: Feb. 9 2012, 10:23 ET)
Not from a to z but nice
Grizzley vs. harbor freight?  (Started: Feb. 5 2012, 02:41 ET, Last post: Feb. 8 2012, 13:07 ET)
Any ideas?  (Started: Jan. 30 2012, 19:07 ET, Last post: Feb. 3 2012, 07:34 ET)
What grit green wheel to sharpen carbide tooling?  (Started: Jan. 29 2012, 07:39 ET, Last post: Feb. 1 2012, 03:56 ET)
Casting aluminum gun parts  (Started: Jan. 4 2012, 01:15 ET, Last post: Jan. 30 2012, 23:33 ET)
Nice vidio  (Started: Jan. 30 2012, 05:44 ET, Last post: Jan. 30 2012, 23:11 ET)
Cutting an internal keyway on a lathe
Nice milling machine trick  (Started: Jan. 22 2012, 13:27 ET, Last post: Jan. 29 2012, 05:39 ET)
For amateurs, the pros probably know it.
Wear of parts versus hardness  (Started: Jan. 12 2012, 11:51 ET, Last post: Jan. 12 2012, 18:58 ET)
How does it work?
Seen these?  (Started: Jan. 6 2012, 15:38 ET, Last post: Jan. 12 2012, 16:13 ET)
Starting a home shop  (Started: Jan. 5 2012, 16:37 ET, Last post: Jan. 9 2012, 09:00 ET)
Home equipement
Homemade automatic welding machine  (Started: Dec. 14 2011, 19:03 ET, Last post: Jan. 9 2012, 08:29 ET)
Manual shaver?  (Started: Jan. 5 2012, 11:58 ET, Last post: Jan. 7 2012, 14:00 ET)
Special tap  (Started: Jan. 2 2012, 16:51 ET, Last post: Jan. 3 2012, 10:17 ET)
Welding receiver thread  (Started: Dec. 29 2011, 11:36 ET, Last post: Jan. 2 2012, 13:55 ET)
Welding receiver thread
Boring head  (Started: Dec. 22 2011, 07:43 ET, Last post: Dec. 30 2011, 17:31 ET)
Show my cleaned up homeworkshop  (Started: Dec. 21 2011, 11:59 ET, Last post: Dec. 28 2011, 18:41 ET)
Yeah i am bragging usually ahellova mess
My tangental toolholder  (Started: Dec. 23 2011, 17:47 ET, Last post: Dec. 25 2011, 12:52 ET)
Getting another lathe  (Started: Dec. 22 2011, 08:14 ET, Last post: Dec. 23 2011, 06:10 ET)
Some poor men ideas ?  (Started: Dec. 21 2011, 04:29 ET, Last post: Dec. 21 2011, 04:29 ET)
Have a look at it your self
Heatreating  (Started: Dec. 18 2011, 19:58 ET, Last post: Dec. 20 2011, 22:00 ET)
With a kiln
Removing front sight  (Started: Nov. 15 2011, 21:07 ET, Last post: Dec. 20 2011, 21:50 ET)
Help in removing front sight
Casting 316 stainless  (Started: Dec. 15 2011, 01:52 ET, Last post: Dec. 19 2011, 20:08 ET)
Not a how :(
Hydroforming sheet metal  (Started: Dec. 5 2011, 23:40 ET, Last post: Dec. 17 2011, 16:59 ET)
--using old inner tubes!
Hitorque mini-mill  (Started: Sep. 1 2011, 22:50 ET, Last post: Dec. 14 2011, 17:46 ET)
Anybody try one yet?
Build the nmachine to build the guns  (Started: Nov. 2 2011, 22:42 ET, Last post: Dec. 13 2011, 13:00 ET)
Are aloris type tool holders all interchageable  (Started: Dec. 8 2011, 08:17 ET, Last post: Dec. 8 2011, 17:14 ET)
If the size is correct?
Possible good deal on square column mill/drill.  (Started: Dec. 6 2011, 15:47 ET, Last post: Dec. 6 2011, 15:47 ET)
At enco
5c collet spinner  (Started: Dec. 2 2011, 17:36 ET, Last post: Dec. 5 2011, 21:50 ET)
Chinese machinery availability dwindling  (Started: Dec. 1 2011, 13:54 ET, Last post: Dec. 5 2011, 11:47 ET)
The end of an era?
G0720r mill  (Started: Dec. 2 2011, 20:33 ET, Last post: Dec. 2 2011, 23:43 ET)
Product commentary
Please don't look at this if you are squimish  (Started: Feb. 21 2008, 03:08 ET, Last post: Dec. 2 2011, 10:00 ET)
Internal threads  (Started: Dec. 2 2011, 00:17 ET, Last post: Dec. 2 2011, 09:48 ET)
Found a clausing colchester series 8000...question  (Started: Nov. 22 2011, 17:59 ET, Last post: Nov. 24 2011, 13:29 ET)
Small mills  (Started: Oct. 12 2011, 10:46 ET, Last post: Nov. 15 2011, 08:33 ET)
Home shop mills sub-bridgeport
Harbor freight mini mill  (Started: Nov. 4 2011, 11:49 ET, Last post: Nov. 12 2011, 10:39 ET)
Column modification
Morse taper conversion on drill press?  (Started: Oct. 6 2011, 15:37 ET, Last post: Nov. 11 2011, 14:00 ET)
Antique lathe  (Started: Nov. 1 2011, 12:29 ET, Last post: Nov. 3 2011, 13:40 ET)
New lathe questions  (Started: Aug. 19 2011, 09:34 ET, Last post: Nov. 1 2011, 08:51 ET)
Dial indicators  (Started: Oct. 29 2011, 11:36 ET, Last post: Oct. 30 2011, 00:18 ET)
Chambering on an al-320g  (Started: Oct. 21 2011, 04:19 ET, Last post: Oct. 28 2011, 08:25 ET)
Chamber cutting using a fixed steady
Optical attachment for milling machine  (Started: Sep. 30 2011, 23:13 ET, Last post: Oct. 1 2011, 07:53 ET)
Optical attachment for milling machine
Grizzley g0602 lathe owners: what say you?  (Started: Jun. 14 2011, 19:06 ET, Last post: Sep. 29 2011, 10:10 ET)
What are the pros and cons?
Drilling and rifling a jaco mini barrel  (Started: Sep. 18 2011, 11:30 ET, Last post: Sep. 25 2011, 01:08 ET)
Should i try this?
Rotary table  (Started: Aug. 23 2011, 12:37 ET, Last post: Sep. 14 2011, 00:25 ET)
Finally, a real lathe.  (Started: Sep. 3 2011, 15:35 ET, Last post: Sep. 5 2011, 12:04 ET)
Knockdown .22 targets  (Started: Sep. 5 2011, 08:54 ET, Last post: Sep. 5 2011, 10:31 ET)
Resettable
Vertical band-saw cutting  (Started: Sep. 3 2011, 16:52 ET, Last post: Sep. 4 2011, 17:07 ET)
Something clever from my pop
Modern-standard lathe  (Started: Aug. 25 2011, 00:30 ET, Last post: Aug. 25 2011, 21:09 ET)
Finally got me a shaper!  (Started: Aug. 14 2011, 03:03 ET, Last post: Aug. 20 2011, 03:21 ET)
I show you mine, you show me yours (-:
Help  (Started: Aug. 17 2011, 12:11 ET, Last post: Aug. 17 2011, 15:21 ET)
Tracer machine
Southbend 9" lathe model a  (Started: May 15 2011, 18:41 ET, Last post: Aug. 17 2011, 10:19 ET)
Rebuilding in progress
Vertec indexer fixture plate  (Started: Aug. 14 2011, 21:58 ET, Last post: Aug. 16 2011, 16:19 ET)
New mill arrived!  (Started: Jul. 22 2011, 19:52 ET, Last post: Aug. 16 2011, 08:28 ET)
Haas vf4ss on the floor
New lathe chuck  (Started: Aug. 3 2011, 00:42 ET, Last post: Aug. 5 2011, 01:42 ET)
Suck it up to chuck it up?
Free machinist articles  (Started: Jul. 8 2011, 10:58 ET, Last post: Jul. 15 2011, 02:40 ET)
Walnut shell bead blasting  (Started: Jul. 2 2011, 03:25 ET, Last post: Jul. 3 2011, 01:33 ET)
Deep hole creation  (Started: Jun. 14 2011, 10:38 ET, Last post: Jun. 27 2011, 00:33 ET)
Got my bridgeport  (Started: Jun. 2 2011, 16:18 ET, Last post: Jun. 25 2011, 14:31 ET)
But i need a little help...
Final metalworking project (semi) done  (Started: May 1 2010, 12:16 ET, Last post: Jun. 13 2011, 12:26 ET)
Small vise.
Sparkplug  (Started: Jun. 11 2011, 11:23 ET, Last post: Jun. 11 2011, 21:00 ET)
Drawbar
Making a tapered barrel on a lath  (Started: May 17 2011, 18:51 ET, Last post: Jun. 3 2011, 16:53 ET)
Anyone know anything about it?
Found - on-line source for files  (Started: May 31 2011, 16:06 ET, Last post: May 31 2011, 22:08 ET)
Machine-hauling trailer  (Started: May 2 2011, 23:23 ET, Last post: May 18 2011, 18:09 ET)
Been done?
Cutting fluid survey  (Started: Apr. 3 2011, 19:58 ET, Last post: May 14 2011, 21:15 ET)
It rubs the lotion on its skin...
Heat treating  (Started: May 6 2011, 22:21 ET, Last post: May 8 2011, 10:01 ET)
Harbor freight tool grinder?  (Started: Apr. 27 2011, 09:02 ET, Last post: Apr. 30 2011, 13:00 ET)
Milling a slot  (Started: Apr. 22 2011, 00:07 ET, Last post: Apr. 25 2011, 23:55 ET)
Advice needed !!!!!!!
Silky smooth threads, how to?  (Started: Apr. 10 2011, 00:29 ET, Last post: Apr. 19 2011, 12:18 ET)
How to cut silky smooth threads
A little game of "kill the carrier"  (Started: Feb. 10 2011, 17:23 ET, Last post: Apr. 10 2011, 18:52 ET)
Carrier... carriage...  same diff.
Counterboring in a drill press  (Started: Mar. 30 2011, 23:50 ET, Last post: Apr. 7 2011, 13:19 ET)
Digital level  (Started: Mar. 8 2011, 11:29 ET, Last post: Apr. 7 2011, 04:23 ET)
Home shop stick welders  (Started: Mar. 25 2011, 11:24 ET, Last post: Apr. 4 2011, 20:01 ET)
Best type
Aluminum chips for foundry  (Started: Jan. 19 2011, 14:49 ET, Last post: Mar. 29 2011, 00:24 ET)
Worth the trouble to melt?
Machining remington 700 tang  (Started: Mar. 8 2011, 15:56 ET, Last post: Mar. 19 2011, 23:11 ET)
Harbor freight discount  (Started: Feb. 19 2011, 15:34 ET, Last post: Mar. 14 2011, 23:30 ET)
Sput welder  (Started: Feb. 22 2011, 13:13 ET, Last post: Feb. 26 2011, 14:47 ET)
Weaver mounts  (Started: Feb. 4 2011, 12:09 ET, Last post: Feb. 26 2011, 13:11 ET)
Fabrication
Bridgeport milling machine  (Started: Dec. 23 2010, 09:10 ET, Last post: Feb. 25 2011, 12:50 ET)
Tap size problem  (Started: Feb. 17 2011, 19:50 ET, Last post: Feb. 18 2011, 09:50 ET)
Thread diameter question  (Started: Feb. 2 2011, 21:36 ET, Last post: Feb. 9 2011, 12:03 ET)
Od for threads
Crucibles for melting metals  (Started: Feb. 2 2011, 13:57 ET, Last post: Feb. 9 2011, 11:50 ET)
Home-made crucibles
Homemade edm  (Started: Dec. 25 2010, 06:28 ET, Last post: Feb. 5 2011, 13:00 ET)
Anyone done/tried this yet?
Drill hole  (Started: Jan. 21 2011, 15:26 ET, Last post: Feb. 3 2011, 14:17 ET)
Problem with my drill hole
Unknown metal ?  (Started: Jan. 21 2011, 21:15 ET, Last post: Jan. 21 2011, 21:15 ET)
D1-4 fixture  (Started: Jan. 8 2011, 19:31 ET, Last post: Jan. 16 2011, 18:08 ET)
So, i've got a new project idea
Gearhead or belt drive.  (Started: Jan. 10 2011, 16:22 ET, Last post: Jan. 12 2011, 09:01 ET)
Mini-lathe belt drive conversion  (Started: Dec. 28 2010, 14:21 ET, Last post: Dec. 31 2010, 20:29 ET)
Need help making a spider  (Started: Nov. 7 2010, 20:13 ET, Last post: Dec. 30 2010, 22:55 ET)
What in the world is this thread?!
Hot to cut a 45° internal bevel  (Started: Dec. 17 2010, 09:14 ET, Last post: Dec. 20 2010, 01:37 ET)
Gunmetal 50bmg receiver
My home machine shop  (Started: Oct. 18 2009, 16:22 ET, Last post: Dec. 16 2010, 00:07 ET)
Starting to take shape
Another type of bench top mill  (Started: Dec. 5 2010, 20:45 ET, Last post: Dec. 13 2010, 08:16 ET)
New un confirmed information  (Started: Dec. 11 2010, 06:57 ET, Last post: Dec. 11 2010, 08:33 ET)
But i don't gav dry ice
Cole drill for sale on ebay  (Started: Dec. 5 2010, 18:34 ET, Last post: Dec. 9 2010, 01:52 ET)
Heads-up for you guys!
Couple 1/4 hp dc motors for sale  (Started: Dec. 6 2010, 22:59 ET, Last post: Dec. 6 2010, 22:59 ET)
Upgrade your mini-tools?  combat robot?
Ballnose endmill  (Started: Nov. 28 2010, 14:15 ET, Last post: Dec. 2 2010, 16:36 ET)
Why the center line?
Good buy or not?  (Started: Nov. 25 2010, 15:49 ET, Last post: Nov. 27 2010, 20:39 ET)
My new used lathe and mill
Action jig  (Started: Nov. 14 2010, 17:26 ET, Last post: Nov. 16 2010, 01:00 ET)
Power feed help  (Started: Nov. 10 2010, 22:51 ET, Last post: Nov. 12 2010, 13:13 ET)
Drawbar brake  (Started: Nov. 9 2010, 20:14 ET, Last post: Nov. 10 2010, 17:13 ET)
Wth?
Have to start somewhere  (Started: Sep. 17 2010, 17:25 ET, Last post: Nov. 10 2010, 10:50 ET)
Finally bought a lathe  (Started: Oct. 17 2010, 17:39 ET, Last post: Nov. 5 2010, 23:53 ET)
Upgrading from a x2 to a x3 mill.  (Started: Oct. 29 2010, 16:18 ET, Last post: Oct. 30 2010, 15:39 ET)
Anybody have a good cheap source for pulleys  (Started: Oct. 28 2010, 14:17 ET, Last post: Oct. 29 2010, 23:05 ET)
And bearings, etc
Fixing up the shop  (Started: Oct. 19 2010, 17:21 ET, Last post: Oct. 21 2010, 18:06 ET)
Soda blaster  (Started: Oct. 19 2010, 10:32 ET, Last post: Oct. 19 2010, 18:23 ET)
Aro's  (Started: Dec. 4 2004, 14:17 ET, Last post: Oct. 11 2010, 17:45 ET)
Mini-mill mods
Lathe question  (Started: Oct. 3 2010, 10:06 ET, Last post: Oct. 11 2010, 10:55 ET)
What lathe should i go with
Tool holding  (Started: Sep. 27 2010, 20:22 ET, Last post: Oct. 2 2010, 15:16 ET)
Dros pros  (Started: Sep. 24 2010, 10:19 ET, Last post: Oct. 2 2010, 01:26 ET)
Savage 110 or target actions threads  (Started: Oct. 1 2010, 12:06 ET, Last post: Oct. 1 2010, 16:32 ET)
Need thread lenght please.
Luthier's friend  (Started: Sep. 28 2010, 20:38 ET, Last post: Sep. 29 2010, 00:11 ET)
A nifty tool
Just found another lathe  (Started: Sep. 25 2010, 18:59 ET, Last post: Sep. 26 2010, 07:34 ET)
Gopinion on a lathe  (Started: Sep. 25 2010, 14:20 ET, Last post: Sep. 25 2010, 21:19 ET)
Broken bit removal  (Started: Sep. 21 2010, 01:17 ET, Last post: Sep. 25 2010, 10:09 ET)
Thank goodness for carbide
I must be living right  (Started: Sep. 20 2010, 07:54 ET, Last post: Sep. 20 2010, 19:37 ET)
Aluminum bronze  (Started: Jul. 8 2010, 21:02 ET, Last post: Sep. 14 2010, 20:53 ET)
Making my own
Casting thread  (Started: Sep. 6 2010, 11:47 ET, Last post: Sep. 14 2010, 14:58 ET)
Melting metal
Tool post grinder  (Started: Aug. 21 2010, 15:11 ET, Last post: Sep. 11 2010, 18:01 ET)
Milling spindle design  (Started: Aug. 19 2010, 10:17 ET, Last post: Sep. 11 2010, 07:59 ET)
Would this work?
Toolbox organization  (Started: Aug. 30 2010, 00:27 ET, Last post: Sep. 2 2010, 14:24 ET)
How to cut internal threads  (Started: Dec. 23 2008, 16:50 ET, Last post: Aug. 29 2010, 11:14 ET)
...in case you wanted to know
Lathe repair  (Started: Aug. 26 2010, 10:38 ET, Last post: Aug. 26 2010, 11:16 ET)
Stubborn bad bearing
Inexpensive coolant system  (Started: Aug. 23 2010, 23:34 ET, Last post: Aug. 26 2010, 11:01 ET)
Pinion wire  (Started: Aug. 22 2010, 22:10 ET, Last post: Aug. 26 2010, 10:16 ET)
How do i make a socket???
New "used" equipment  (Started: Aug. 17 2010, 09:49 ET, Last post: Aug. 19 2010, 10:19 ET)
Stuff i just got.
Getting frustrated with o1  (Started: Aug. 12 2010, 18:48 ET, Last post: Aug. 16 2010, 19:17 ET)
What lubricant for rf45 clones?  (Started: Jul. 17 2010, 13:08 ET, Last post: Aug. 16 2010, 17:46 ET)
What are you using for oil in rf45?
Im gonna buy a lathe soon  (Started: Aug. 1 2010, 10:09 ET, Last post: Aug. 15 2010, 18:35 ET)
Any tips?
Lubing gears in headstock mini lathe  (Started: Aug. 2 2010, 01:39 ET, Last post: Aug. 2 2010, 04:42 ET)
Litmahineshop minilathe dro  (Started: Aug. 2 2010, 01:30 ET, Last post: Aug. 2 2010, 01:30 ET)
Ran across this on the web.....  (Started: Jul. 31 2010, 12:22 ET, Last post: Aug. 1 2010, 18:13 ET)
Stedy rest for lathe  (Started: Jul. 25 2010, 13:47 ET, Last post: Aug. 1 2010, 05:25 ET)
Diy design i like best
Petro oxy-gasoline cutting system  (Started: Jul. 27 2010, 06:46 ET, Last post: Aug. 1 2010, 00:11 ET)
Anyone here ever use one?
Drilling tool steel  (Started: Jul. 25 2010, 23:59 ET, Last post: Jul. 27 2010, 11:24 ET)
Reamers  (Started: Jul. 26 2010, 00:17 ET, Last post: Jul. 26 2010, 01:27 ET)
Tail stock dro  (Started: Jul. 26 2010, 00:31 ET, Last post: Jul. 26 2010, 01:24 ET)
Geared head chinese machines  (Started: Jul. 13 2010, 23:51 ET, Last post: Jul. 25 2010, 22:52 ET)
Any history of trouble?
My new old lathe  (Started: Jul. 18 2010, 05:56 ET, Last post: Jul. 24 2010, 23:47 ET)
Atlas 6"
What equipment to buy  (Started: Jul. 10 2010, 07:58 ET, Last post: Jul. 18 2010, 09:06 ET)
The birth of a new workshop  (Started: Nov. 28 2008, 12:26 ET, Last post: Jul. 13 2010, 00:38 ET)
Enco promo code  (Started: May 8 2009, 19:46 ET, Last post: Jul. 12 2010, 14:04 ET)
Free shipping
Help with lath cone project  (Started: Jul. 7 2010, 15:40 ET, Last post: Jul. 8 2010, 11:40 ET)
What tool for cutting an internal cone.
High presure flush system made at tsjc  (Started: Jun. 22 2010, 07:02 ET, Last post: Jul. 7 2010, 20:28 ET)
Picture of system we made
Effective way to weld aluminum?  (Started: Jul. 1 2002, 16:09 ET, Last post: Jul. 6 2010, 17:09 ET)
Kind of confused
Help with smithy 13x40  (Started: Jun. 30 2010, 14:23 ET, Last post: Jul. 5 2010, 00:36 ET)
Turret lathe question  (Started: Jun. 27 2010, 20:55 ET, Last post: Jun. 27 2010, 22:17 ET)
Checking dro on grizzly mini mill  (Started: Jun. 22 2010, 14:10 ET, Last post: Jun. 27 2010, 21:59 ET)
Picture of dice
Could someone confirm that i need a 5/8" clamp  (Started: Jun. 25 2010, 10:48 ET, Last post: Jun. 27 2010, 16:43 ET)
And t-nut set for my 9 x 42 b-port mill.
"forward" brand miller - bp clone  (Started: Mar. 24 2010, 18:22 ET, Last post: Jun. 22 2010, 23:28 ET)
Wondering about quality of this mill
New to the site, just wanted to share  (Started: Jun. 21 2010, 19:41 ET, Last post: Jun. 22 2010, 21:49 ET)
Need some help on a revolver project.  (Started: Jun. 6 2010, 07:48 ET, Last post: Jun. 22 2010, 17:03 ET)
New to me mill  (Started: Jun. 21 2010, 22:51 ET, Last post: Jun. 21 2010, 23:23 ET)
Proud new owner of a series 1 bridgeport  (Started: Jun. 21 2010, 15:44 ET, Last post: Jun. 21 2010, 22:54 ET)
With 2 hp and variable speed, clean.
Horizontal bandsaw - which one?  (Started: Jun. 12 2010, 22:03 ET, Last post: Jun. 17 2010, 00:26 ET)
I need an inexpensive bandsaw for metal
Installing dro on minilathe help  (Started: Jun. 14 2010, 16:42 ET, Last post: Jun. 15 2010, 09:43 ET)
Nice welding site with good advice  (Started: Jun. 13 2010, 20:53 ET, Last post: Jun. 13 2010, 23:26 ET)
For experts and newbies alike
Variable frequency drive, or rotary phase convertr  (Started: May 18 2010, 08:49 ET, Last post: Jun. 12 2010, 18:49 ET)
Mc 4 vs mk 4  (Started: Jun. 1 2010, 17:43 ET, Last post: Jun. 8 2010, 22:37 ET)
Are they the same?
Need a bit of machining...  (Started: Jun. 5 2010, 22:07 ET, Last post: Jun. 6 2010, 19:50 ET)
Annealing  (Started: May 10 2010, 12:51 ET, Last post: Jun. 4 2010, 11:42 ET)
Milling vice's  (Started: Mar. 24 2010, 23:42 ET, Last post: Jun. 3 2010, 15:46 ET)
I can't decide
Cutting square threads  (Started: May 12 2010, 01:00 ET, Last post: May 17 2010, 16:28 ET)
And making tools
Green sand for metal casting  (Started: May 11 2010, 11:42 ET, Last post: May 12 2010, 09:46 ET)
Make your own
Lathe chuck  (Started: May 4 2010, 13:45 ET, Last post: May 11 2010, 14:09 ET)
What to look for?
Value of lathe i'm looking to buy  (Started: May 7 2010, 18:09 ET, Last post: May 10 2010, 16:22 ET)
Invaluable shop first aid: new-skin  (Started: Apr. 24 2010, 16:09 ET, Last post: May 8 2010, 20:49 ET)
How to store your cutters/reamers/etc.  (Started: Mar. 15 2010, 22:54 ET, Last post: May 1 2010, 21:53 ET)
Neat idea i found.
Casted some aluminum today  (Started: Dec. 9 2009, 23:13 ET, Last post: Apr. 28 2010, 22:39 ET)
First time, just messing around
Drilling carbide inserts  (Started: Apr. 26 2010, 10:16 ET, Last post: Apr. 28 2010, 15:49 ET)
What kind of drill?
Corrosion control, again  (Started: Apr. 19 2010, 13:18 ET, Last post: Apr. 26 2010, 14:58 ET)
Sources for quality steel  (Started: Apr. 19 2010, 18:32 ET, Last post: Apr. 26 2010, 12:43 ET)
Where can i scrounge it from?
Mini-lathes  (Started: Feb. 2 2008, 20:19 ET, Last post: Apr. 23 2010, 09:27 ET)
Fuzzbean testing center
A question on bandsaws and drill presses.  (Started: Apr. 16 2010, 23:02 ET, Last post: Apr. 21 2010, 11:09 ET)
What do i need?
Pipe threads  (Started: Apr. 12 2010, 02:23 ET, Last post: Apr. 18 2010, 20:50 ET)
Time to buy a  poor mans lathe with pics  (Started: Apr. 15 2010, 02:59 ET, Last post: Apr. 18 2010, 20:42 ET)
Which lathe for that price range
Allen key steel  (Started: Apr. 14 2010, 08:20 ET, Last post: Apr. 15 2010, 06:48 ET)
What steel grade?
It's the little things...  (Started: Apr. 9 2010, 17:52 ET, Last post: Apr. 11 2010, 02:20 ET)
Minilathe tailstock cam lock  (Started: Apr. 8 2010, 01:04 ET, Last post: Apr. 9 2010, 12:01 ET)
Can someone make a part for my project?  (Started: Apr. 5 2010, 15:45 ET, Last post: Apr. 8 2010, 00:22 ET)
Machine tools  (Started: Apr. 7 2010, 00:52 ET, Last post: Apr. 7 2010, 12:03 ET)
"free" metalworking home study course  (Started: Feb. 8 2006, 16:18 ET, Last post: Apr. 7 2010, 08:31 ET)
A couple conditions, but otherwise good
Bridgeport j head mill  (Started: Apr. 3 2010, 12:42 ET, Last post: Apr. 5 2010, 21:30 ET)
Is it worth the money?
Southbend lathe  (Started: Apr. 3 2010, 12:28 ET, Last post: Apr. 5 2010, 04:14 ET)
Is it worth the monies?
Lubing gears in headstock  (Started: Mar. 31 2010, 01:19 ET, Last post: Mar. 31 2010, 23:48 ET)
Metal properties reference  (Started: Mar. 24 2010, 09:24 ET, Last post: Mar. 29 2010, 10:13 ET)
Got a drill doctor today  (Started: Mar. 26 2010, 20:58 ET, Last post: Mar. 27 2010, 16:53 ET)
Vertical mill question......  (Started: Nov. 13 2009, 02:09 ET, Last post: Mar. 27 2010, 12:40 ET)
How to make it idiot proof
Pilot holes  (Started: Mar. 25 2010, 02:17 ET, Last post: Mar. 26 2010, 06:22 ET)
I want to build a heat treating oven  (Started: Mar. 20 2010, 23:35 ET, Last post: Mar. 26 2010, 00:49 ET)
To melt aluminum, heat treat, forge
Hss vs carbide  (Started: Mar. 24 2010, 10:43 ET, Last post: Mar. 25 2010, 13:57 ET)
Cheap cutting tools, your experiences good or bad?  (Started: Mar. 14 2010, 23:24 ET, Last post: Mar. 23 2010, 21:54 ET)
A question from a newb
Minimill belt drive conversion  (Started: Mar. 9 2010, 16:34 ET, Last post: Mar. 23 2010, 16:17 ET)
Things shifting when trying to mill  (Started: Mar. 12 2010, 17:01 ET, Last post: Mar. 22 2010, 09:37 ET)
Show me your spider  (Started: Mar. 21 2010, 23:47 ET, Last post: Mar. 22 2010, 00:24 ET)
Is that what its called??
Help with a new part  (Started: Mar. 19 2010, 14:57 ET, Last post: Mar. 20 2010, 13:01 ET)
How can i make this
Is there any actual use for one of these?  (Started: Mar. 17 2010, 03:58 ET, Last post: Mar. 19 2010, 12:04 ET)
Hf micro lathe
Poor mans optical comparator?  (Started: Mar. 16 2010, 02:12 ET, Last post: Mar. 19 2010, 09:32 ET)
Precision ground threaded rod  (Started: Mar. 15 2010, 10:22 ET, Last post: Mar. 18 2010, 08:34 ET)
Source of supply
Mini lathe bed extension  (Started: Mar. 17 2010, 02:09 ET, Last post: Mar. 17 2010, 22:45 ET)
Carbide drill bits  (Started: Mar. 13 2010, 15:27 ET, Last post: Mar. 17 2010, 00:44 ET)
All is not lost afterall  (Started: Mar. 14 2010, 21:20 ET, Last post: Mar. 14 2010, 21:20 ET)
Milling cutter sharpner?  (Started: Mar. 14 2010, 13:27 ET, Last post: Mar. 14 2010, 14:32 ET)
Is that what this is?
Need quick responses  (Started: Mar. 13 2010, 18:16 ET, Last post: Mar. 14 2010, 10:54 ET)
Grizzly g0619
Non gun related: practicing manual external radii  (Started: Mar. 11 2010, 20:10 ET, Last post: Mar. 13 2010, 12:03 ET)
The step over method.
Mounting cheap dro on grizzly g0619 mill  (Started: Mar. 3 2010, 19:25 ET, Last post: Mar. 12 2010, 19:37 ET)
How to grind lathe cutters  (Started: Dec. 29 2008, 18:41 ET, Last post: Mar. 11 2010, 22:04 ET)
...in case you wanted to know
Good x-y cross-slide vise?  (Started: Mar. 10 2010, 02:15 ET, Last post: Mar. 11 2010, 06:10 ET)
I’ll never have to buy end mills again!  (Started: Feb. 27 2010, 22:55 ET, Last post: Mar. 9 2010, 23:57 ET)
Sorry had to show off.
Copy milling question.  (Started: Mar. 6 2010, 21:35 ET, Last post: Mar. 9 2010, 22:00 ET)
I guess that describes it.
Another newb mill question  (Started: Feb. 23 2010, 01:30 ET, Last post: Mar. 4 2010, 20:40 ET)
G0704 grizzly
Clausing lathe  (Started: Feb. 24 2010, 21:03 ET, Last post: Feb. 28 2010, 15:58 ET)
Tell me about these ways  (Started: Feb. 23 2010, 10:20 ET, Last post: Feb. 25 2010, 21:39 ET)
Wierd marks
Ball screw assembly  (Started: Feb. 17 2010, 02:31 ET, Last post: Feb. 20 2010, 01:22 ET)
Bridgeport pics  (Started: Feb. 18 2010, 17:37 ET, Last post: Feb. 18 2010, 22:45 ET)
Good or bad deal?
End mills and such?  (Started: Feb. 15 2010, 10:08 ET, Last post: Feb. 16 2010, 21:07 ET)
Mini-lathe setup question  (Started: Jan. 29 2010, 21:19 ET, Last post: Feb. 15 2010, 21:19 ET)
Mini-lathe setup question
Just saying hello  (Started: Feb. 14 2010, 11:18 ET, Last post: Feb. 15 2010, 18:00 ET)
New guy
Opinion and direction on a project please  (Started: Feb. 14 2010, 11:33 ET, Last post: Feb. 15 2010, 00:10 ET)
New (to me)wt 6x26 knee mill acquisition  (Started: Feb. 7 2010, 08:44 ET, Last post: Feb. 14 2010, 10:34 ET)
Buying a bridgeport, what to look for  (Started: Feb. 12 2010, 15:17 ET, Last post: Feb. 13 2010, 10:32 ET)
Bridgeport inspection???
Tapping very small holes  (Started: Feb. 3 2010, 01:55 ET, Last post: Feb. 12 2010, 21:39 ET)
Got a big problem.  (Started: Feb. 6 2010, 20:58 ET, Last post: Feb. 9 2010, 21:43 ET)
Dowel pin hole preparation  (Started: Feb. 6 2010, 01:42 ET, Last post: Feb. 9 2010, 00:56 ET)
R8 collets  (Started: Feb. 6 2010, 08:10 ET, Last post: Feb. 7 2010, 08:14 ET)
Tool questions
Electro etching  (Started: Oct. 11 2009, 17:12 ET, Last post: Feb. 3 2010, 23:05 ET)
Using stuff you already have
Oooo, i want a mill like this.  oooooo.  (Started: Feb. 1 2010, 15:18 ET, Last post: Feb. 1 2010, 17:54 ET)
Phosphating a file (metal) good or bad idea?  (Started: Jan. 27 2010, 04:23 ET, Last post: Jan. 31 2010, 12:53 ET)
Dro scales  (Started: Jan. 29 2010, 15:12 ET, Last post: Jan. 29 2010, 21:53 ET)
Tool porn!  (Started: Jan. 27 2010, 19:19 ET, Last post: Jan. 27 2010, 20:33 ET)
Smithy 1220 xl  (Started: Jan. 19 2010, 08:57 ET, Last post: Jan. 21 2010, 13:20 ET)
Class d fires  (Started: Jan. 20 2010, 12:09 ET, Last post: Jan. 21 2010, 12:28 ET)
Anyone ever burned any metal?
Shellac fixture  (Started: Jan. 16 2010, 17:55 ET, Last post: Jan. 17 2010, 22:18 ET)
Opening a 25/32 lathe spindle  (Started: Jan. 13 2010, 01:37 ET, Last post: Jan. 16 2010, 22:45 ET)
Anyone done this?
Used lathe  (Started: Jan. 10 2010, 12:09 ET, Last post: Jan. 14 2010, 10:36 ET)
Standard-modern 11x20
X3 mill conversion  (Started: Jan. 3 2010, 16:40 ET, Last post: Jan. 12 2010, 07:41 ET)
New cnc for the garage shop
Shumatech dro-550 group buy  (Started: Jan. 11 2010, 19:53 ET, Last post: Jan. 11 2010, 22:26 ET)
Shumatech dro for mill and lathe
Timing threads  (Started: Jan. 4 2010, 07:13 ET, Last post: Jan. 11 2010, 11:42 ET)
Matching barrels and receivers
7 x 12 mini lathe concern / question.  (Started: Jan. 9 2010, 21:29 ET, Last post: Jan. 10 2010, 14:06 ET)
Question about the headstock.
Engraving designs with a panto mill  (Started: Jan. 6 2010, 06:54 ET, Last post: Jan. 7 2010, 08:48 ET)
Thread milling with a tap?  (Started: Jan. 6 2010, 07:31 ET, Last post: Jan. 7 2010, 06:25 ET)
Mill question  (Started: Dec. 31 2009, 09:59 ET, Last post: Jan. 6 2010, 06:45 ET)
Minimum distance from spindle to table
Just got my grizzly 2010 catalogue in the mail.  (Started: Jan. 1 2010, 23:24 ET, Last post: Jan. 3 2010, 18:22 ET)
New "south bend" stuff.
Repairing worn ways  (Started: Jan. 1 2010, 01:42 ET, Last post: Jan. 3 2010, 14:11 ET)
8" southbend
I highly recommend this book  (Started: Oct. 25 2009, 00:28 ET, Last post: Jan. 1 2010, 12:32 ET)
To metalworkers
What grit wheels for a surface grinder?  (Started: Dec. 22 2009, 01:50 ET, Last post: Dec. 29 2009, 22:13 ET)
Lathe-what do you think?  (Started: Dec. 14 2009, 19:43 ET, Last post: Dec. 24 2009, 18:55 ET)
New lathe!!!  (Started: Dec. 24 2009, 01:36 ET, Last post: Dec. 24 2009, 14:03 ET)
Paint
Lathe carriage milling attachment  (Started: Dec. 20 2009, 22:38 ET, Last post: Dec. 23 2009, 17:41 ET)
Real simple
Drive belt for surface grinder  (Started: Nov. 18 2009, 19:13 ET, Last post: Dec. 22 2009, 01:18 ET)
Fill it with lead  (Started: Dec. 19 2009, 10:57 ET, Last post: Dec. 21 2009, 21:21 ET)
Make it solid!
Lathe for sale--ct  (Started: Dec. 17 2009, 22:41 ET, Last post: Dec. 19 2009, 11:10 ET)
Right forum?
Machine shop training video.s  (Started: Dec. 15 2009, 20:30 ET, Last post: Dec. 18 2009, 20:58 ET)
Shop pics!  post a pic of your shop!  (Started: Dec. 14 2009, 16:36 ET, Last post: Dec. 15 2009, 18:45 ET)
Surface grinder evaluation  (Started: Dec. 9 2009, 13:47 ET, Last post: Dec. 9 2009, 20:44 ET)
Looking for some "hands on" info
Sandvic online course  (Started: Nov. 29 2009, 09:19 ET, Last post: Nov. 30 2009, 23:32 ET)
Shop building  (Started: Nov. 4 2009, 21:03 ET, Last post: Nov. 30 2009, 20:43 ET)
What's the best way?
Phas converter panel output voltage  (Started: Nov. 25 2009, 21:37 ET, Last post: Nov. 28 2009, 20:10 ET)
More mill dillemma!  (Started: Nov. 16 2009, 12:39 ET, Last post: Nov. 27 2009, 21:19 ET)
Advice wanted on g3102 / 30939 knee mill
Pratt & whitney 12 rotary table  (Started: Nov. 19 2009, 07:51 ET, Last post: Nov. 23 2009, 19:37 ET)
Look what i found for a bargain
My turn to ask for mill recommendations  (Started: Nov. 22 2009, 16:00 ET, Last post: Nov. 23 2009, 18:48 ET)
Help me spend my boss' money
Making a rotary broach holder  (Started: Nov. 12 2009, 14:45 ET, Last post: Nov. 18 2009, 00:36 ET)
Birmingham lathe  (Started: Nov. 14 2009, 15:05 ET, Last post: Nov. 16 2009, 20:38 ET)
Do not buy
Atlas lathe  (Started: Nov. 11 2009, 16:09 ET, Last post: Nov. 16 2009, 17:58 ET)
Took the $500 delivered plunge report  (Started: Oct. 24 2009, 22:57 ET, Last post: Nov. 12 2009, 04:31 ET)
Puting a wheel on a surface grinder  (Started: Nov. 8 2009, 23:27 ET, Last post: Nov. 9 2009, 16:57 ET)
Lathes  (Started: Oct. 25 2009, 16:46 ET, Last post: Nov. 2 2009, 16:20 ET)
To upgrade or not?
Harbor freight tools  (Started: Oct. 8 2009, 12:19 ET, Last post: Nov. 1 2009, 01:04 ET)
One car garage shop  (Started: Jul. 6 2009, 01:22 ET, Last post: Oct. 26 2009, 13:49 ET)
Import 10x22 lathe and rf45 mill
Surface grinder  (Started: Oct. 7 2009, 19:16 ET, Last post: Oct. 19 2009, 20:11 ET)
Abrasive machine tool co.
Need assistance identifying stuff  (Started: Oct. 8 2009, 21:39 ET, Last post: Oct. 15 2009, 19:15 ET)
Bl330 lathe  (Started: Oct. 13 2009, 18:25 ET, Last post: Oct. 14 2009, 21:48 ET)
Where to get parts for this thing?
Lathe selected (possibly)  (Started: Oct. 8 2009, 22:41 ET, Last post: Oct. 14 2009, 16:06 ET)
Internal threads  (Started: Oct. 11 2009, 22:47 ET, Last post: Oct. 12 2009, 18:00 ET)
Want to learn to lathe  (Started: Oct. 8 2009, 01:53 ET, Last post: Oct. 9 2009, 22:53 ET)
Happy with my "new" band saw!  (Started: Oct. 9 2009, 04:31 ET, Last post: Oct. 9 2009, 09:49 ET)
My used metal lathe  (Started: Oct. 5 2009, 08:54 ET, Last post: Oct. 6 2009, 04:31 ET)
How to sell it, by parts or together?
Atlas lathe gears  (Started: Sep. 9 2009, 19:58 ET, Last post: Oct. 2 2009, 20:58 ET)
Has anyone cut enfield #4 barrel threads before?  (Started: Sep. 1 2009, 20:55 ET, Last post: Sep. 25 2009, 14:47 ET)
Need to replace current barrel
Melting metal at home  (Started: Jul. 24 2009, 10:17 ET, Last post: Sep. 24 2009, 14:50 ET)
In the microwave!
Dro for bridgeport?  (Started: Sep. 23 2009, 13:01 ET, Last post: Sep. 23 2009, 20:56 ET)
Need some help  (Started: Sep. 23 2009, 13:31 ET, Last post: Sep. 23 2009, 13:31 ET)
Looking for a file
Harbor freight 8x12 lathe  (Started: Feb. 16 2007, 04:53 ET, Last post: Sep. 23 2009, 12:17 ET)
Looks like a deal for a small machine
Thanks for the heads up on buying used.  (Started: Sep. 14 2009, 17:12 ET, Last post: Sep. 22 2009, 16:28 ET)
My new shaper has landed...  (Started: Sep. 6 2009, 19:07 ET, Last post: Sep. 21 2009, 23:55 ET)
Tons of fun (2 tons, to be exact...)
Christmas came early.  need some advice.  (Started: Sep. 16 2009, 19:32 ET, Last post: Sep. 20 2009, 22:10 ET)
Used surface grinder ?'s  (Started: Sep. 13 2009, 00:01 ET, Last post: Sep. 19 2009, 14:42 ET)
Unimat 3  (Started: Sep. 14 2009, 18:37 ET, Last post: Sep. 16 2009, 20:34 ET)
Motor
Colchester lathe help  (Started: Sep. 11 2009, 23:12 ET, Last post: Sep. 14 2009, 21:46 ET)
Kurt vice prob. stupid question.  (Started: Sep. 11 2009, 22:57 ET, Last post: Sep. 13 2009, 15:42 ET)
Jaws.
Lathe spindle leak?  (Started: Sep. 13 2009, 14:28 ET, Last post: Sep. 13 2009, 14:28 ET)
Anybody had to fix this?
Info? cincinnatti  (Started: Sep. 10 2009, 13:07 ET, Last post: Sep. 13 2009, 10:01 ET)
Treadle lathes  (Started: Sep. 11 2009, 13:46 ET, Last post: Sep. 12 2009, 15:30 ET)
Need xpert 'vice
Nifty kurt vice gizmo  (Started: Sep. 12 2009, 08:19 ET, Last post: Sep. 12 2009, 09:15 ET)
New old lathe  (Started: Sep. 7 2009, 21:09 ET, Last post: Sep. 11 2009, 10:39 ET)
Got my first micrometer off ebay, questions...  (Started: Sep. 10 2009, 15:31 ET, Last post: Sep. 10 2009, 18:11 ET)
Water in my air  (Started: Aug. 9 2009, 16:31 ET, Last post: Sep. 7 2009, 13:49 ET)
Need dry air to blast for new finish
Drill press repair  (Started: Sep. 6 2009, 20:28 ET, Last post: Sep. 7 2009, 08:32 ET)
Anyone use a big shaper?  (Started: Aug. 30 2009, 20:48 ET, Last post: Sep. 6 2009, 23:57 ET)
Mounting, moving, etc.
3-jaw chuck truing  (Started: Sep. 6 2009, 11:10 ET, Last post: Sep. 6 2009, 23:18 ET)
Budget home shop shopping list.  (Started: Sep. 4 2009, 12:00 ET, Last post: Sep. 6 2009, 21:02 ET)
Advice wanted.
Bridgeport quillmaster/qra  (Started: Aug. 11 2009, 19:39 ET, Last post: Sep. 3 2009, 22:50 ET)
Wish me luck
What do with old files?  (Started: Aug. 27 2009, 14:42 ET, Last post: Sep. 3 2009, 20:28 ET)
The metal cutting type.
Homemade surface grinder  (Started: Aug. 26 2009, 04:12 ET, Last post: Aug. 26 2009, 22:59 ET)
How a guy did it - not me
Old gunsmith  (Started: Aug. 14 2009, 11:01 ET, Last post: Aug. 20 2009, 23:23 ET)
Home workshop
Olde tyme machine shope  (Started: Aug. 18 2009, 11:04 ET, Last post: Aug. 18 2009, 15:49 ET)
Steam powered!
Okay i have a sickness  (Started: Aug. 16 2009, 11:27 ET, Last post: Aug. 18 2009, 09:50 ET)
Multi flute cutter  (Started: Aug. 10 2009, 21:50 ET, Last post: Aug. 12 2009, 08:58 ET)
Here you go nevada
Disc grinder  (Started: Aug. 5 2009, 16:14 ET, Last post: Aug. 9 2009, 21:52 ET)
12" disc
Multi flute reamer geometry question  (Started: Aug. 9 2009, 14:38 ET, Last post: Aug. 9 2009, 14:38 ET)
Am i thinking too much?
Kennametal beyond grade  (Started: Aug. 4 2009, 18:36 ET, Last post: Aug. 7 2009, 08:13 ET)
Lathe tool inserts
Mystery metal  (Started: Jul. 17 2009, 20:03 ET, Last post: Aug. 4 2009, 20:14 ET)
Any guesses?
Mill coolant issues.  please help.  (Started: Jul. 16 2009, 03:39 ET, Last post: Jul. 27 2009, 05:31 ET)
Rust....
Opinion about a lathe for gunsmithing  (Started: Jul. 25 2009, 10:50 ET, Last post: Jul. 25 2009, 16:32 ET)
Link to a bunch of neat shop ideas.  (Started: Jun. 27 2009, 20:08 ET, Last post: Jul. 21 2009, 06:14 ET)
Drawbar for my lathe?  (Started: Jul. 9 2009, 21:11 ET, Last post: Jul. 10 2009, 21:41 ET)
Spot welding copper  (Started: Jul. 6 2009, 16:13 ET, Last post: Jul. 8 2009, 01:00 ET)
Briggs & stratton crankshaft  (Started: May 8 2009, 19:54 ET, Last post: Jul. 5 2009, 23:19 ET)
Suitable for a rifle barrel?
Whitworth gauges?  (Started: Jul. 3 2009, 02:47 ET, Last post: Jul. 5 2009, 16:30 ET)
Are they worth it?
Which vise?  (Started: Jul. 3 2009, 15:18 ET, Last post: Jul. 5 2009, 10:52 ET)
List of home and shop sites  (Started: Jul. 4 2009, 11:35 ET, Last post: Jul. 5 2009, 10:47 ET)
The sites i read to learn how to do...
Coolant delivery?  (Started: Jun. 27 2009, 22:35 ET, Last post: Jul. 3 2009, 19:03 ET)
Will an electric fuel pump cut it?
Knife shop to machine shop  (Started: Jun. 24 2009, 01:25 ET, Last post: Jun. 28 2009, 17:38 ET)
May be buying a bridgeport from a customer  (Started: Jun. 2 2009, 22:30 ET, Last post: Jun. 28 2009, 14:56 ET)
New arrivals  (Started: Jun. 11 2009, 19:20 ET, Last post: Jun. 28 2009, 09:01 ET)
Happy birthday/happy father's day!
Minimum investment for learning metalworking.  (Started: Jun. 25 2009, 13:36 ET, Last post: Jun. 27 2009, 21:02 ET)
Well,it finally happened !  (Started: Jun. 17 2009, 19:21 ET, Last post: Jun. 26 2009, 18:24 ET)
I got a mill.
Need a little help  (Started: Jun. 16 2009, 15:42 ET, Last post: Jun. 19 2009, 18:03 ET)
Cast concrete for workbench?  (Started: Jun. 16 2009, 22:41 ET, Last post: Jun. 18 2009, 21:44 ET)
Help a newbie out here  (Started: Jun. 16 2009, 00:51 ET, Last post: Jun. 17 2009, 16:55 ET)
Lathes, lathes, and more lathes!
A crazy idea, what think you all?  (Started: Jun. 14 2009, 11:08 ET, Last post: Jun. 16 2009, 15:52 ET)
Make a tall mini mill
Wiring question 3p  (Started: Jun. 7 2009, 00:02 ET, Last post: Jun. 13 2009, 21:27 ET)
Fuji vertical mill?  (Started: Jun. 10 2009, 04:06 ET, Last post: Jun. 11 2009, 17:10 ET)
Simple question for the experts...  (Started: Jun. 6 2009, 18:26 ET, Last post: Jun. 7 2009, 15:07 ET)
Bridgeport j head, question
Just need to vent…  (Started: Jun. 5 2009, 15:10 ET, Last post: Jun. 7 2009, 13:58 ET)
Welding safety question  (Started: May 21 2009, 00:39 ET, Last post: Jun. 6 2009, 22:11 ET)
Vfd advise??  (Started: May 24 2009, 21:08 ET, Last post: Jun. 4 2009, 14:27 ET)
Brake drum forge  (Started: May 22 2009, 23:36 ET, Last post: May 31 2009, 21:40 ET)
Any advice?
South bend model 5 change gears  (Started: May 25 2009, 13:36 ET, Last post: May 25 2009, 14:12 ET)
Machining question  (Started: May 23 2009, 20:47 ET, Last post: May 24 2009, 12:21 ET)
Jet mill  (Started: May 7 2009, 02:40 ET, Last post: May 22 2009, 17:44 ET)
Ya or nay
Noise level of mini-mill  (Started: May 19 2009, 19:20 ET, Last post: May 22 2009, 00:20 ET)
Gear drive, or belt conversion
Wanted bluprint program  (Started: May 20 2009, 22:51 ET, Last post: May 21 2009, 23:14 ET)
Looking for bluprint program
Smithy machines???  (Started: Apr. 25 2009, 16:01 ET, Last post: May 11 2009, 13:11 ET)
Combo machine to love  (Started: May 2 2009, 00:43 ET, Last post: May 10 2009, 20:34 ET)
4 jaw chuck  (Started: May 8 2009, 22:03 ET, Last post: May 9 2009, 13:34 ET)
Can i use this chuck
Collet holder  (Started: May 6 2009, 18:21 ET, Last post: May 9 2009, 06:55 ET)
Need to get hold of one for my lathe
Broaching cutter  (Started: Apr. 28 2009, 07:38 ET, Last post: Apr. 29 2009, 07:57 ET)
Nextengine  (Started: Apr. 8 2009, 21:20 ET, Last post: Apr. 28 2009, 21:54 ET)
A hobby shop dream tool
Professional gear design  (Started: Apr. 6 2009, 23:07 ET, Last post: Apr. 27 2009, 02:07 ET)
I are an engineer
Hey gene,  (Started: Apr. 26 2009, 19:53 ET, Last post: Apr. 26 2009, 22:24 ET)
01 tool steel specifications  (Started: Apr. 9 2009, 06:43 ET, Last post: Apr. 26 2009, 21:50 ET)
How to cut threads  (Started: Dec. 24 2008, 19:53 ET, Last post: Apr. 25 2009, 21:50 ET)
...in case you wanted to know.
Barrel drilling  (Started: Apr. 23 2009, 03:20 ET, Last post: Apr. 23 2009, 10:59 ET)
Barrel lathe work
Welding info and question thread  (Started: Apr. 6 2009, 17:59 ET, Last post: Apr. 10 2009, 00:37 ET)
Is this a good surface grinder  (Started: Jan. 8 2009, 18:39 ET, Last post: Apr. 9 2009, 14:53 ET)
Knurling  (Started: Apr. 2 2009, 12:34 ET, Last post: Apr. 8 2009, 00:30 ET)
How to - other than round ??
Going to try an 1874 sharps but what steel to use?  (Started: Apr. 2 2009, 14:11 ET, Last post: Apr. 7 2009, 10:42 ET)
Phase converter panel wiring  (Started: Mar. 20 2009, 12:55 ET, Last post: Apr. 6 2009, 23:14 ET)
90 degree cutter for weaver mount  (Started: Apr. 4 2009, 00:12 ET, Last post: Apr. 4 2009, 06:12 ET)
90 degree cutter for weaver mount
Feed back needed  (Started: Mar. 15 2009, 09:20 ET, Last post: Mar. 29 2009, 11:37 ET)
Is this thing woth it?
If you had to get a..  (Started: Mar. 18 2009, 18:54 ET, Last post: Mar. 28 2009, 14:07 ET)
Extreme bridgeport setups  (Started: Mar. 19 2009, 22:00 ET, Last post: Mar. 22 2009, 16:01 ET)
Show us your tough jobs!
First cuts on the shaper  (Started: Mar. 20 2009, 19:09 ET, Last post: Mar. 20 2009, 23:19 ET)
Text book of turning  (Started: Mar. 12 2009, 07:30 ET, Last post: Mar. 15 2009, 19:27 ET)
Drilling deep holes  (Started: Mar. 1 2009, 00:14 ET, Last post: Mar. 15 2009, 10:03 ET)
What tip angle is best?
Burke mill  (Started: Mar. 13 2009, 18:42 ET, Last post: Mar. 13 2009, 18:42 ET)
Vertical attachment
Cheap milling machine, "one step up"  (Started: Dec. 15 2008, 18:12 ET, Last post: Mar. 11 2009, 15:52 ET)
From a bench top unit.
First project?  (Started: Mar. 9 2009, 23:23 ET, Last post: Mar. 10 2009, 22:04 ET)
Ideas and suggestions
Shaper weight??  (Started: Feb. 22 2009, 13:53 ET, Last post: Mar. 10 2009, 15:19 ET)
Craftsman/atlas lathe worth?  (Started: Feb. 24 2009, 18:33 ET, Last post: Mar. 8 2009, 22:28 ET)
Update the old scratch start  (Started: Feb. 1 2009, 13:55 ET, Last post: Mar. 8 2009, 14:26 ET)
New hf start box for welder
Lost foam castinging  (Started: Feb. 27 2009, 21:50 ET, Last post: Mar. 5 2009, 07:09 ET)
A interesting demo for cad to part
Phase converter useage.  (Started: Feb. 24 2009, 23:48 ET, Last post: Mar. 3 2009, 23:19 ET)
Well now i have the big four  (Started: Feb. 26 2009, 20:23 ET, Last post: Mar. 2 2009, 23:28 ET)
Hor. mill questions  (Started: Feb. 23 2009, 07:24 ET, Last post: Feb. 25 2009, 21:43 ET)
Cuttters running out of true
Plastic injection molding machine?  (Started: Aug. 14 2006, 03:13 ET, Last post: Feb. 23 2009, 04:44 ET)
Can it be made?
Steady rest  (Started: Feb. 21 2009, 23:23 ET, Last post: Feb. 22 2009, 23:56 ET)
Replacing spud tips
Best tool in the shop?  (Started: Feb. 20 2009, 17:53 ET, Last post: Feb. 21 2009, 16:00 ET)
Your head...
Cutting screws / bolts to custom length  (Started: Feb. 16 2009, 23:41 ET, Last post: Feb. 17 2009, 19:31 ET)
Simple, but handy
New addition to my shop  (Started: Feb. 15 2009, 21:27 ET, Last post: Feb. 17 2009, 11:47 ET)
New surface grinder
Upgrading the steady rest  (Started: Feb. 7 2009, 17:44 ET, Last post: Feb. 14 2009, 15:20 ET)
Best bearing surface material?
Slotting cutter arbor  (Started: Jan. 19 2009, 22:26 ET, Last post: Feb. 14 2009, 05:32 ET)
Deluxe model
Is this a decent mill?  (Started: Jan. 26 2009, 16:05 ET, Last post: Feb. 10 2009, 22:27 ET)
7" ammco shaper on ebay  (Started: Feb. 5 2009, 18:48 ET, Last post: Feb. 9 2009, 22:30 ET)
Mill/drill difficulties  (Started: Feb. 1 2009, 23:55 ET, Last post: Feb. 8 2009, 15:03 ET)
Swiveling slop
A2 and d2 tool steel  (Started: Feb. 7 2009, 15:23 ET, Last post: Feb. 7 2009, 16:49 ET)
Shaper / grinder  (Started: Feb. 5 2009, 21:47 ET, Last post: Feb. 7 2009, 10:50 ET)
Horizontal mill dilema  (Started: Feb. 5 2009, 11:20 ET, Last post: Feb. 6 2009, 04:51 ET)
Air tools  (Started: Feb. 3 2009, 10:44 ET, Last post: Feb. 5 2009, 23:54 ET)
Best quality for the right price?
New addition to shop  (Started: Jan. 24 2009, 21:28 ET, Last post: Feb. 4 2009, 18:22 ET)
Some assembly required
New lathe  (Started: Feb. 1 2009, 13:05 ET, Last post: Feb. 4 2009, 01:24 ET)
How not to do it
Lost foam  (Started: Jan. 16 2009, 22:46 ET, Last post: Jan. 30 2009, 22:40 ET)
Gone but not forgotten
Any experience with rockwell mills?  (Started: Jan. 26 2009, 15:58 ET, Last post: Jan. 28 2009, 09:40 ET)
That you want to share ...
Vertex super spacer  (Started: Jan. 25 2009, 23:38 ET, Last post: Jan. 26 2009, 10:32 ET)
Lost manual for ss
Hendy lathe  (Started: Jan. 24 2009, 19:38 ET, Last post: Jan. 25 2009, 00:49 ET)
Opinions/suggestions needed
I might of made a big mistake, and want advice  (Started: Jan. 14 2009, 21:56 ET, Last post: Jan. 20 2009, 23:20 ET)
I traded some of my wood working equipme
Mobility of medium size lathes  (Started: Jan. 17 2009, 13:32 ET, Last post: Jan. 20 2009, 10:21 ET)
Need to take apart to fit in basement
Link to good info  (Started: Jan. 18 2009, 20:49 ET, Last post: Jan. 19 2009, 11:13 ET)
Can someone gimmie a rundown on brands?  (Started: Jan. 12 2009, 09:50 ET, Last post: Jan. 16 2009, 21:13 ET)
Or a link to a site that does?
Using 1 dro head on multiple machines?  (Started: Jan. 12 2009, 20:36 ET, Last post: Jan. 14 2009, 09:22 ET)
Possible? worth the effort?
Spindle sander  (Started: Jan. 4 2009, 12:15 ET, Last post: Jan. 9 2009, 18:14 ET)
How to build one ?
I'm considering buying this  (Started: Jan. 4 2009, 05:53 ET, Last post: Jan. 8 2009, 12:03 ET)
Drill press slow down  (Started: Dec. 30 2008, 20:35 ET, Last post: Jan. 5 2009, 01:56 ET)
Help a newbie.  (Started: Dec. 11 2008, 06:29 ET, Last post: Jan. 4 2009, 04:21 ET)
Recomended books for learning the trade.
Addition to "how to grind lathe cutters"  (Started: Dec. 31 2008, 20:33 ET, Last post: Jan. 2 2009, 18:12 ET)
I need a surface grinder  (Started: Dec. 28 2008, 21:47 ET, Last post: Dec. 30 2008, 10:15 ET)
...and i blame alphawolf
Fluting my barrel..:-)  (Started: Nov. 14 2008, 15:59 ET, Last post: Dec. 24 2008, 19:37 ET)
Cutting internal threads  (Started: Dec. 23 2008, 13:02 ET, Last post: Dec. 24 2008, 13:23 ET)
How to cut acme screw threads  (Started: Dec. 22 2008, 22:26 ET, Last post: Dec. 23 2008, 19:38 ET)
In case you were wondering...
New lathe!  (Started: Dec. 19 2008, 20:00 ET, Last post: Dec. 23 2008, 00:49 ET)
Jet-1340pbd
Lathe help please  (Started: Dec. 20 2008, 01:04 ET, Last post: Dec. 22 2008, 21:27 ET)
Mini-lathe cheap  (Started: Dec. 15 2008, 01:35 ET, Last post: Dec. 19 2008, 20:45 ET)
On sale today
Anyone need 11000lbs of drills?  (Started: Nov. 7 2008, 18:51 ET, Last post: Dec. 17 2008, 03:47 ET)
Collet tubes?  (Started: Dec. 7 2008, 22:58 ET, Last post: Dec. 10 2008, 01:41 ET)
Cheap carbide milling cutter alternatives  (Started: Apr. 27 2008, 09:45 ET, Last post: Dec. 9 2008, 17:51 ET)
Use at yer own risk
G0463 vs g0619?  (or x3 vs sx3)  (Started: Nov. 11 2008, 08:04 ET, Last post: Nov. 14 2008, 12:02 ET)
Tool box  (Started: Oct. 7 2008, 01:22 ET, Last post: Nov. 14 2008, 09:04 ET)
Slitting saw question  (Started: Nov. 11 2008, 23:41 ET, Last post: Nov. 13 2008, 12:04 ET)
Interesting bulk auction site  (Started: Nov. 7 2008, 21:24 ET, Last post: Nov. 7 2008, 21:24 ET)
Dilemma  (Started: Oct. 29 2008, 12:21 ET, Last post: Oct. 30 2008, 15:20 ET)
Cnc rotary table
Spring winding  (Started: Oct. 29 2008, 00:06 ET, Last post: Oct. 29 2008, 19:45 ET)
A short tutorial
Anilam dro?  (Started: Oct. 21 2008, 11:53 ET, Last post: Oct. 21 2008, 16:35 ET)
Bridgeport head maintenance  (Started: Oct. 19 2008, 22:00 ET, Last post: Oct. 21 2008, 00:10 ET)
Milling vise question  (Started: May 13 2008, 17:29 ET, Last post: Oct. 16 2008, 19:09 ET)
How much vise is too much?
I have been wanting to ask  (Started: Oct. 15 2008, 20:37 ET, Last post: Oct. 16 2008, 19:04 ET)
Rockwell radial drill press
Tooling up!  (Started: May 20 2008, 08:37 ET, Last post: Oct. 9 2008, 18:34 ET)
Parting/grooving tool question:  (Started: Sep. 2 2008, 18:11 ET, Last post: Oct. 5 2008, 09:36 ET)
Steady rest roller tips  (Started: Sep. 23 2008, 08:52 ET, Last post: Oct. 2 2008, 11:33 ET)
Vfd (was) on the fritz  (Started: Sep. 6 2008, 10:22 ET, Last post: Sep. 29 2008, 16:59 ET)
This is weird
Opinions on dro  (Started: Sep. 1 2008, 13:47 ET, Last post: Sep. 20 2008, 08:22 ET)
What to buy
Dro's  (Started: Feb. 26 2008, 14:13 ET, Last post: Sep. 20 2008, 08:19 ET)
Chinese dro's
Any electronics people?  (Started: Sep. 12 2008, 17:44 ET, Last post: Sep. 17 2008, 22:11 ET)
Sony dro that doesn't dro
Cool setup  (Started: Aug. 25 2008, 23:43 ET, Last post: Sep. 12 2008, 23:10 ET)
My new job
If you're looking for a little bridgeport  (Started: Sep. 8 2008, 15:58 ET, Last post: Sep. 12 2008, 17:14 ET)
And you're in new york.  ebay post
Vises: you can't have too many  (Started: Aug. 24 2008, 19:35 ET, Last post: Sep. 5 2008, 21:11 ET)
...and sometimes you get lucky
Combo roll/brake/shear machines  (Started: Aug. 31 2008, 16:01 ET, Last post: Sep. 1 2008, 19:00 ET)
Instructions?  how do you use the rolls?
Micro-mark sale  (Started: Aug. 29 2008, 20:15 ET, Last post: Aug. 29 2008, 20:15 ET)
For those who care?
Fuzzbean wounded in industrial accident  (Started: Mar. 19 2008, 04:31 ET, Last post: Aug. 29 2008, 01:41 ET)
Details at 11:00
Lathe/mill-which first  (Started: Aug. 22 2008, 18:13 ET, Last post: Aug. 24 2008, 17:41 ET)
Wannabe needs to know!
Machine shop books  (Started: Aug. 23 2008, 19:27 ET, Last post: Aug. 23 2008, 23:44 ET)
Lathe vibrates  (Started: Jul. 24 2008, 03:55 ET, Last post: Aug. 23 2008, 19:59 ET)
Can't get a smooth surface on workpieces
Desperate and possibly stupid  (Started: Aug. 19 2008, 09:59 ET, Last post: Aug. 22 2008, 07:44 ET)
I need a mill!!!
Mini mill  (Started: Jul. 23 2008, 17:21 ET, Last post: Aug. 21 2008, 00:42 ET)
Alliant mill questions  (Started: Aug. 18 2008, 23:32 ET, Last post: Aug. 20 2008, 00:32 ET)
Casting cam - iron pour video  (Started: Aug. 2 2008, 18:27 ET, Last post: Aug. 3 2008, 17:15 ET)
Pouring iron
First iron pour '08  (Started: Jul. 15 2008, 02:43 ET, Last post: Aug. 2 2008, 16:09 ET)
Casting fun
Burke #4 mill  (Started: Apr. 13 2008, 16:10 ET, Last post: Jul. 29 2008, 00:02 ET)
New toy
Foundations of welding  (Started: Jul. 5 2008, 16:53 ET, Last post: Jul. 23 2008, 18:44 ET)
Tips to improve your results
Receiver hardness question  (Started: Jun. 4 2008, 21:13 ET, Last post: Jul. 21 2008, 02:55 ET)
Ebay lathe, pretty decent price  (Started: Jul. 17 2008, 19:06 ET, Last post: Jul. 19 2008, 03:14 ET)
It's too far for me, but if you're close
New foundry video  (Started: May 28 2008, 00:14 ET, Last post: Jul. 19 2008, 00:04 ET)
My casting project  (Started: Jun. 1 2008, 06:24 ET, Last post: Jul. 14 2008, 12:27 ET)
Steps toward building steam launch
Welding aluminum  (Started: Jun. 23 2008, 05:29 ET, Last post: Jul. 12 2008, 19:24 ET)
Adventures with a cheapie chinese vise  (Started: Jul. 10 2008, 15:16 ET, Last post: Jul. 12 2008, 12:33 ET)
A follow-on to "milling vise question"
Cheap metal bandsaws  (Started: Jul. 8 2008, 02:17 ET, Last post: Jul. 8 2008, 10:12 ET)
And their care and feeding
New forge and anvil  (Started: Jun. 20 2008, 17:40 ET, Last post: Jun. 29 2008, 22:04 ET)
I got a jr. blacksmiths starter kit!
A good reason not to use the chinese ti endmills  (Started: Jun. 19 2008, 10:39 ET, Last post: Jun. 28 2008, 22:16 ET)
Unique home-made macine shop  (Started: Jun. 18 2008, 20:36 ET, Last post: Jun. 19 2008, 22:32 ET)
{not a gingery}
Starrett #98 level  (Started: Jun. 7 2008, 18:22 ET, Last post: Jun. 14 2008, 01:25 ET)
Fuzzbeanized $200 bandsaw  (Started: Jan. 23 2007, 04:50 ET, Last post: Jun. 4 2008, 00:45 ET)
Worth $200!
Need some lathe usage help!  (Started: Apr. 13 2008, 16:25 ET, Last post: May 31 2008, 09:59 ET)
Tapered octagon  (Started: Mar. 28 2008, 10:52 ET, Last post: May 30 2008, 23:28 ET)
How to hold it
Tapers and arbors?  (Started: May 27 2008, 13:56 ET, Last post: May 30 2008, 22:36 ET)
R8  jt33 jt6? oh my!
Mill/drill table on ebay  (Started: May 14 2008, 02:01 ET, Last post: May 14 2008, 20:21 ET)
Possibly of interest
Pee hands  (Started: Apr. 20 2008, 16:45 ET, Last post: May 13 2008, 23:30 ET)
Ever see this?
Milling machine idea  (Started: Apr. 5 2008, 04:42 ET, Last post: May 9 2008, 07:46 ET)
Table mod
Rust preventative for mini lathe  (Started: Feb. 16 2008, 08:36 ET, Last post: May 5 2008, 17:37 ET)
What should i use
Dro problems ?  (Started: Apr. 22 2008, 15:19 ET, Last post: Apr. 25 2008, 10:08 ET)
Not sure if its me or the dro
Enco 15% discount  (Started: Apr. 15 2008, 17:30 ET, Last post: Apr. 18 2008, 16:59 ET)
Expires friday
Mini knee mill  (Started: Apr. 4 2008, 12:58 ET, Last post: Apr. 15 2008, 01:44 ET)
Finding a lathe that rocks!!  (Started: Apr. 11 2008, 01:29 ET, Last post: Apr. 12 2008, 19:10 ET)
Steel mini-mill gears  (Started: Apr. 8 2008, 05:37 ET, Last post: Apr. 11 2008, 11:21 ET)
Look pretty good
First operation versus second operation lathes  (Started: Apr. 8 2008, 17:28 ET, Last post: Apr. 10 2008, 18:58 ET)
What's the diff?
Beginner's tools  (Started: Apr. 5 2008, 11:57 ET, Last post: Apr. 9 2008, 15:49 ET)
What to get?
Redneck mill power feed  (Started: Apr. 6 2008, 07:17 ET, Last post: Apr. 7 2008, 07:39 ET)
Mill power feed
Lathe help please!  (Started: Apr. 5 2008, 18:19 ET, Last post: Apr. 6 2008, 15:11 ET)
Harborfreight 12x36
Band saw  (Started: Mar. 20 2008, 07:53 ET, Last post: Apr. 6 2008, 00:01 ET)
For metal?
Coolant - home brew  (Started: Mar. 31 2008, 20:47 ET, Last post: Apr. 5 2008, 19:38 ET)
Home brew coolant
Industrial hobbies  (Started: Mar. 28 2008, 19:25 ET, Last post: Apr. 4 2008, 00:41 ET)
Square column bed mill
Do these come in a metal-working version?  (Started: Apr. 1 2008, 23:46 ET, Last post: Apr. 2 2008, 04:35 ET)
Who couldn't use one of these!
Alert, alert!  axa holders, $9  (Started: Feb. 9 2008, 07:38 ET, Last post: Apr. 1 2008, 02:18 ET)
Potential new lathe  (Started: Mar. 22 2008, 00:04 ET, Last post: Mar. 28 2008, 10:50 ET)
Questions
Lathe & mill possibilities  (Started: Mar. 12 2008, 14:19 ET, Last post: Mar. 19 2008, 16:21 ET)
Shumatech dros  (Started: Mar. 17 2008, 21:47 ET, Last post: Mar. 19 2008, 15:27 ET)
Anyone with experience?
Interesting link  (Started: Dec. 20 2007, 00:28 ET, Last post: Mar. 18 2008, 20:33 ET)
Machines and tools
Barrel threading without lathe?  (Started: Feb. 23 2008, 00:25 ET, Last post: Mar. 18 2008, 19:01 ET)
Threading a barrel with a die?
Best tooling suppliers  (Started: Mar. 8 2008, 21:44 ET, Last post: Mar. 13 2008, 00:13 ET)
Finally got a mill
Interesting lathes  (Started: Feb. 23 2008, 04:07 ET, Last post: Mar. 11 2008, 06:43 ET)
I'm addicted to wimpy machines
Value?  (Started: Feb. 19 2008, 16:55 ET, Last post: Feb. 29 2008, 09:13 ET)
Machining through hard chrome?  (Started: Feb. 27 2008, 05:20 ET, Last post: Feb. 27 2008, 18:51 ET)
Can it be done
Best steel  (Started: Apr. 5 2007, 19:04 ET, Last post: Feb. 26 2008, 22:04 ET)
Quick change gearbox for mini lathes  (Started: Feb. 10 2008, 10:35 ET, Last post: Feb. 18 2008, 09:57 ET)
Rail cutter  (Started: Feb. 15 2008, 22:59 ET, Last post: Feb. 16 2008, 13:31 ET)
Straight tooth woodruff keyseat cutter
Bridgeport for sale at work  (Started: Feb. 12 2008, 17:17 ET, Last post: Feb. 15 2008, 17:13 ET)
Need advice
Tool sharpening advice needed - diamond??  (Started: Feb. 14 2008, 06:34 ET, Last post: Feb. 15 2008, 10:50 ET)
Cummins free shipping  (Started: Jan. 13 2008, 02:07 ET, Last post: Feb. 14 2008, 01:30 ET)
For a few more days
Product pitch - corrosion-x  (Started: Feb. 6 2008, 09:35 ET, Last post: Feb. 10 2008, 10:03 ET)
It's good stuff
Enco lathe sale  (Started: Feb. 6 2008, 15:53 ET, Last post: Feb. 8 2008, 07:45 ET)
Fyi
Homebuilt mill  (Started: Jan. 27 2006, 22:40 ET, Last post: Feb. 8 2008, 07:32 ET)
Yet another lathe question  (Started: Feb. 6 2008, 13:58 ET, Last post: Feb. 7 2008, 19:01 ET)
What's it worth  (Started: Feb. 3 2008, 21:06 ET, Last post: Feb. 7 2008, 10:44 ET)
Question for fuzzbean or alhpa
New to me bridgeport cnc  (Started: Feb. 5 2008, 22:21 ET, Last post: Feb. 6 2008, 19:02 ET)
My kunk mill.
Which mill would you choose ?  (Started: Feb. 1 2008, 16:13 ET, Last post: Feb. 3 2008, 01:30 ET)
Is this a no-brainer ?
Dremel vs foredom  (Started: Feb. 2 2008, 11:11 ET, Last post: Feb. 2 2008, 14:20 ET)
New fixes for hf mini-lathe  (Started: Jan. 28 2008, 09:04 ET, Last post: Jan. 29 2008, 08:19 ET)
While my lathe drills so deep  (Started: Jan. 22 2008, 02:12 ET, Last post: Jan. 24 2008, 06:59 ET)
Round column mill  (Started: Jan. 19 2008, 16:31 ET, Last post: Jan. 22 2008, 00:04 ET)
Saimp milling machine  (Started: Jan. 17 2008, 16:22 ET, Last post: Jan. 19 2008, 18:32 ET)
Anyone familiar with these?
New lathe kit $135 !!!  (Started: Jan. 16 2008, 11:39 ET, Last post: Jan. 16 2008, 13:57 ET)
Front spider  (Started: Jan. 8 2008, 12:28 ET, Last post: Jan. 13 2008, 18:55 ET)
Ideal vise setup for drill press?  (Started: Jan. 7 2008, 23:24 ET, Last post: Jan. 9 2008, 06:26 ET)
Heat treating aluminum  (Started: Dec. 9 2007, 03:24 ET, Last post: Jan. 7 2008, 17:52 ET)
Harbor freight 8x12 lathe  (Started: Jan. 1 2008, 06:01 ET, Last post: Jan. 7 2008, 07:39 ET)
Anybody buy one?
Lodge & shipley lathe  (Started: Dec. 27 2007, 20:33 ET, Last post: Jan. 6 2008, 17:12 ET)
Anyone looking for a fixer upper lathe?  (Started: Jan. 3 2008, 18:54 ET, Last post: Jan. 3 2008, 18:54 ET)
Three phase lathe question  (Started: Jan. 1 2008, 23:44 ET, Last post: Jan. 3 2008, 00:39 ET)
Buying a grizzly g0463 mill  (Started: Dec. 3 2007, 01:22 ET, Last post: Jan. 2 2008, 23:10 ET)
What tooling should i get?
Hard to do???...  (Started: Dec. 27 2007, 21:55 ET, Last post: Jan. 1 2008, 01:38 ET)
Need experience machinist advise...
Ih mill opinions  (Started: Dec. 21 2007, 22:51 ET, Last post: Dec. 28 2007, 10:34 ET)
Anyobody have one?
G0492 lathe/mill any good?  (Started: Dec. 24 2007, 04:00 ET, Last post: Dec. 26 2007, 09:58 ET)
Phase converter recommendation?  (Started: Dec. 15 2007, 19:23 ET, Last post: Dec. 22 2007, 17:16 ET)
Need a rotary
Cannon drill !!!  (Started: Jun. 10 2007, 00:46 ET, Last post: Dec. 22 2007, 17:06 ET)
I don't know why...
Question about lathes  (Started: Dec. 21 2007, 16:26 ET, Last post: Dec. 21 2007, 17:27 ET)
Doing the impossible  (Started: Dec. 12 2007, 02:05 ET, Last post: Dec. 20 2007, 17:15 ET)
Knowing it is futile
Extending mini lathe?  (Started: Nov. 10 2007, 00:39 ET, Last post: Dec. 17 2007, 23:46 ET)
Recommended lathe for my application?...  (Started: Dec. 7 2007, 18:26 ET, Last post: Dec. 15 2007, 19:46 ET)
What the heck is a "kunk mill?"  (Started: Dec. 8 2007, 22:01 ET, Last post: Dec. 14 2007, 00:23 ET)
And a bit of ranting.
Looking for help.  (Started: Dec. 11 2007, 19:31 ET, Last post: Dec. 13 2007, 23:00 ET)
Help with bridgeport.
Mini-lathe 3 jaw  (Started: Nov. 24 2007, 17:11 ET, Last post: Dec. 11 2007, 20:47 ET)
Cast parts  (Started: Dec. 2 2007, 11:00 ET, Last post: Dec. 5 2007, 13:05 ET)
For finish it yourself
Homebuilt powerfeed  (Started: Dec. 3 2007, 15:14 ET, Last post: Dec. 5 2007, 13:01 ET)
New machinery dealer website  (Started: Dec. 1 2007, 16:32 ET, Last post: Dec. 1 2007, 21:40 ET)
New to me anyhow
Mill drill  (Started: Nov. 22 2007, 11:42 ET, Last post: Nov. 22 2007, 17:36 ET)
What kind
Hardinge rs65msy cnc lathe  (Started: Nov. 17 2007, 18:36 ET, Last post: Nov. 20 2007, 16:17 ET)
Welcome to my nightmare
Tramming a mill need help...  (Started: Oct. 13 2007, 18:50 ET, Last post: Nov. 16 2007, 15:13 ET)
Harbor freight lathe  (Started: Sep. 1 2007, 08:30 ET, Last post: Nov. 14 2007, 19:43 ET)
Fixing play in compound rest
Grizzly g0602  10x22 lathe  (Started: Oct. 16 2007, 22:43 ET, Last post: Nov. 14 2007, 01:41 ET)
Please deposit $.02
Newbie question about collets  (Started: Nov. 6 2007, 20:58 ET, Last post: Nov. 11 2007, 23:55 ET)
Virtual machine shop school  (Started: Nov. 1 2007, 09:31 ET, Last post: Nov. 11 2007, 18:23 ET)
Best i've ever seen
Mini-mill evaluation & modification  (Started: Jan. 4 2007, 02:31 ET, Last post: Nov. 10 2007, 11:12 ET)
A photo-rich environment
Multi-turn 2000  (Started: Nov. 4 2007, 21:20 ET, Last post: Nov. 4 2007, 21:20 ET)
Goofy lathe exposed
Newbie needs machine advice  (Started: Oct. 19 2007, 22:27 ET, Last post: Nov. 4 2007, 19:33 ET)
Product review - enco special sale price  (Started: Oct. 28 2007, 16:14 ET, Last post: Nov. 1 2007, 09:56 ET)
Starrett # 449az-3r depth micrometer
Opinions sought...  (Started: Oct. 21 2007, 05:52 ET, Last post: Oct. 28 2007, 14:36 ET)
Is this worthwhile or a waste of money?
Haas toolroom cnc  (Started: Oct. 27 2007, 00:59 ET, Last post: Oct. 27 2007, 20:11 ET)
Home cnc machine
Solidworks to mastercam  (Started: Oct. 23 2007, 19:17 ET, Last post: Oct. 26 2007, 16:07 ET)
Solid model conversion
Interesting shop tips  (Started: Oct. 18 2007, 18:42 ET, Last post: Oct. 26 2007, 08:05 ET)
Torch welding and brazing ideas
Adjustable reamer q  (Started: Oct. 21 2007, 12:09 ET, Last post: Oct. 21 2007, 22:27 ET)
Is there a trick?
Ok now what do i do??  (Started: Oct. 15 2007, 19:46 ET, Last post: Oct. 19 2007, 18:50 ET)
Moving a mill
Nice looking bridgeports and monarchs in amarillo  (Started: Oct. 19 2007, 14:57 ET, Last post: Oct. 19 2007, 14:57 ET)
Fyi fs on ebay
Lathe issues  (Started: Oct. 18 2007, 21:31 ET, Last post: Oct. 19 2007, 01:09 ET)
Shop standards  (Started: Oct. 18 2007, 00:03 ET, Last post: Oct. 18 2007, 22:52 ET)
Are you a slob?
Howdy machine gurus!  (Started: Oct. 1 2007, 00:41 ET, Last post: Oct. 18 2007, 14:53 ET)
Lathe chuck assistance….
Lathe questions  (Started: Oct. 12 2007, 22:14 ET, Last post: Oct. 15 2007, 12:26 ET)
Ninimal od stop.  (Started: Oct. 11 2007, 14:43 ET, Last post: Oct. 12 2007, 16:38 ET)
Cheap id threading tool?  (Started: Oct. 10 2007, 01:48 ET, Last post: Oct. 11 2007, 23:34 ET)
Lathe tool advice please.
Smoked my mill - advice anyone???  (Started: Oct. 1 2007, 09:21 ET, Last post: Oct. 10 2007, 10:41 ET)
Noobee - looking for advice / info...  (Started: Aug. 31 2007, 14:53 ET, Last post: Oct. 10 2007, 10:37 ET)
Mini-mill spindle speed how-to?
Vertical bandsaw help needed  (Started: Sep. 27 2007, 22:29 ET, Last post: Oct. 8 2007, 21:28 ET)
Replacing a sacrificial gear on an emco  (Started: Oct. 8 2007, 10:09 ET, Last post: Oct. 8 2007, 16:17 ET)
Extending the thread on a magazine tube  (Started: Oct. 8 2007, 09:28 ET, Last post: Oct. 8 2007, 12:11 ET)
New(for me) lathe  (Started: Oct. 7 2007, 22:10 ET, Last post: Oct. 7 2007, 22:46 ET)
Opinions of a lathe?  (Started: Sep. 20 2007, 22:25 ET, Last post: Oct. 5 2007, 14:20 ET)
Cutting o-1 drill rod with hss tools  (Started: Oct. 3 2007, 20:58 ET, Last post: Oct. 4 2007, 17:34 ET)
Welding the lug on a barrel  (Started: Oct. 2 2007, 00:28 ET, Last post: Oct. 4 2007, 05:51 ET)
The reuleaux triangle applied!  (Started: Mar. 7 2007, 02:13 ET, Last post: Oct. 2 2007, 14:31 ET)
A non-circular figure of constant width.
Nice taiwanese 12x32 lathe...  (Started: Sep. 29 2007, 12:53 ET, Last post: Oct. 1 2007, 13:14 ET)
Only $25,000.00
Machine shop trade secrets  (Started: Feb. 16 2007, 05:02 ET, Last post: Oct. 1 2007, 11:41 ET)
Book
Try again  (Started: Sep. 14 2007, 15:41 ET, Last post: Sep. 30 2007, 15:22 ET)
Who has a power hacksaw  (Started: Sep. 13 2007, 20:10 ET, Last post: Sep. 24 2007, 02:09 ET)
And how does it work?
Lathe/mill - a fair price?  (Started: Sep. 15 2007, 23:33 ET, Last post: Sep. 23 2007, 21:24 ET)
Need some help on price
Contact points on a g4003 lathe  (Started: Sep. 21 2007, 21:37 ET, Last post: Sep. 22 2007, 21:24 ET)
Smithy 1324???  (Started: Jul. 26 2007, 19:01 ET, Last post: Sep. 17 2007, 18:25 ET)
Christmas in september  (Started: Sep. 13 2007, 14:42 ET, Last post: Sep. 13 2007, 16:08 ET)
Grounding  m head bridgeport  (Started: Sep. 11 2007, 00:17 ET, Last post: Sep. 12 2007, 00:25 ET)
New mill  (Started: Feb. 17 2007, 15:02 ET, Last post: Sep. 9 2007, 07:14 ET)
Finally
Need help changing chucks on my grizzley lathe  (Started: Sep. 4 2007, 19:57 ET, Last post: Sep. 8 2007, 14:09 ET)
I know… i’m still a newbie… i have a question abou  (Started: Sep. 3 2007, 18:51 ET, Last post: Sep. 8 2007, 00:24 ET)
Rip fence for the ak  (Started: Sep. 5 2007, 22:42 ET, Last post: Sep. 7 2007, 19:15 ET)
Single to three phase power  (Started: Sep. 3 2007, 15:27 ET, Last post: Sep. 6 2007, 10:15 ET)
Newbie here....seeking advice  (Started: Aug. 27 2007, 16:01 ET, Last post: Sep. 6 2007, 04:14 ET)
Proxxon mini mill $317.00  (Started: Aug. 3 2007, 06:34 ET, Last post: Sep. 5 2007, 02:04 ET)
Is it any good?
Hollow mills? chamfer mills?  (Started: Aug. 30 2007, 14:47 ET, Last post: Sep. 3 2007, 04:19 ET)
Any info about hollow mills, chamfer ?
Enco mill/drill wiring help  (Started: Aug. 24 2007, 02:41 ET, Last post: Sep. 1 2007, 23:57 ET)
Help on wiring
Advice  (Started: Apr. 22 2007, 10:09 ET, Last post: Sep. 1 2007, 06:11 ET)
Milling machne
Shaper operation  (Started: Jul. 20 2007, 00:58 ET, Last post: Aug. 25 2007, 00:46 ET)
Knowledge base
Router bits in a mill?  (Started: Aug. 23 2007, 19:20 ET, Last post: Aug. 24 2007, 19:20 ET)
The answer to question you never asked!
Need your adice?  (Started: Jul. 26 2007, 18:40 ET, Last post: Aug. 23 2007, 08:23 ET)
Atlas lathe purchase.
Working in thousandths and tenths thereof...  (Started: Mar. 28 2007, 23:31 ET, Last post: Aug. 21 2007, 02:32 ET)
Real-world accuracy
Power twist belts  (Started: Aug. 17 2007, 21:47 ET, Last post: Aug. 20 2007, 21:46 ET)
Neat product!
Any seattle area home machinists?  (Started: Aug. 17 2007, 02:23 ET, Last post: Aug. 18 2007, 03:58 ET)
Looking for help
Mill / cnc mill / mill drill research blues  (Started: Aug. 7 2007, 00:38 ET, Last post: Aug. 12 2007, 21:17 ET)
I'm beating my head against a wall
Shaper on ebay  (Started: Jul. 16 2007, 22:42 ET, Last post: Aug. 5 2007, 22:47 ET)
Wish me luck
Another bandsaw pictorial  (Started: Aug. 1 2007, 16:19 ET, Last post: Aug. 2 2007, 04:24 ET)
Converted milwaukee porta saw
My new mortise maker  (Started: Mar. 7 2007, 17:59 ET, Last post: Aug. 1 2007, 21:32 ET)
Armpowered shaper attachment
Vacuum pump info  (Started: Jul. 25 2007, 01:51 ET, Last post: Aug. 1 2007, 01:14 ET)
Yellow jacket from the trash
Just ordered  (Started: Jul. 31 2007, 12:15 ET, Last post: Aug. 1 2007, 00:27 ET)
Horizontal/ vertical band saw???
New member of the family  (Started: Jul. 26 2007, 08:24 ET, Last post: Jul. 31 2007, 07:55 ET)
Shaper pics
Welding on a reciever  (Started: Jul. 29 2007, 15:34 ET, Last post: Jul. 30 2007, 18:38 ET)
What's the largest rotary table  (Started: Jul. 27 2007, 03:06 ET, Last post: Jul. 29 2007, 19:49 ET)
For a mini-mill?
Need help with chosing new cnc mill  (Started: Jul. 11 2007, 03:58 ET, Last post: Jul. 29 2007, 18:41 ET)
My "new" lathe  (Started: Jul. 28 2007, 12:42 ET, Last post: Jul. 29 2007, 02:19 ET)
New goodie for my atlas 10" lathe  (Started: Jul. 26 2007, 08:30 ET, Last post: Jul. 27 2007, 02:26 ET)
Turret tailstock
Grizly 4003 ssoindle threads for a spider  (Started: Jul. 26 2007, 22:08 ET, Last post: Jul. 26 2007, 23:27 ET)
Ebay find  (Started: Jul. 2 2007, 10:51 ET, Last post: Jul. 24 2007, 14:53 ET)
What is it ???
Cheap digital calipers  (Started: Jul. 18 2007, 12:12 ET, Last post: Jul. 18 2007, 18:36 ET)
Workshop  (Started: Jul. 16 2007, 01:16 ET, Last post: Jul. 17 2007, 00:11 ET)
Deciding between three ideas
My new surface grinder  (Started: Jun. 8 2007, 04:32 ET, Last post: Jul. 8 2007, 18:26 ET)
What to do with it...
The new mill  (Started: Jul. 1 2007, 00:25 ET, Last post: Jul. 3 2007, 21:00 ET)
Grizzly 9x49 220 volt
Making gaschecks  (Started: May 2 2007, 07:57 ET, Last post: Jul. 3 2007, 10:56 ET)
Simple gascheck forming
Machine tool life in salt air  (Started: Jun. 1 2007, 17:33 ET, Last post: Jul. 2 2007, 06:42 ET)
What is the perfered method of locating...  (Started: Jun. 23 2007, 10:53 ET, Last post: Jul. 1 2007, 16:03 ET)
Garage climate control....cheap method?  (Started: May 28 2007, 20:50 ET, Last post: Jul. 1 2007, 08:54 ET)
4 axis cnc vertical knee mill  (Started: Oct. 22 2006, 16:25 ET, Last post: Jun. 30 2007, 22:35 ET)
A question for those with experience
Quick change tool post for lathe  (Started: Jun. 9 2007, 18:25 ET, Last post: Jun. 30 2007, 15:49 ET)
Next newbe question.
I love ebay  (Started: Jun. 28 2007, 22:29 ET, Last post: Jun. 29 2007, 11:41 ET)
Reamers!
Lathe milling attachment question by a total noob  (Started: Jun. 27 2007, 20:34 ET, Last post: Jun. 28 2007, 22:20 ET)
B&s #7 end mill holder  (Started: Jun. 27 2007, 22:10 ET, Last post: Jun. 28 2007, 12:10 ET)
Deep hole  (Started: Jun. 17 2007, 10:28 ET, Last post: Jun. 26 2007, 09:50 ET)
Double fluted drills ?
Web cam visual dro  (Started: Jan. 16 2007, 13:23 ET, Last post: Jun. 17 2007, 02:05 ET)
Milling machine book  (Started: Jun. 12 2007, 14:19 ET, Last post: Jun. 13 2007, 07:31 ET)
Interesting
More dc motor questions  (Started: Jun. 11 2007, 14:34 ET, Last post: Jun. 13 2007, 04:06 ET)
Take a look at this one...
Tap guide  (Started: Jun. 11 2007, 00:06 ET, Last post: Jun. 12 2007, 09:42 ET)
Quick and easy-to-make tool
Part tolerance  (Started: Jun. 11 2007, 00:47 ET, Last post: Jun. 11 2007, 13:11 ET)
Quick referance?
Surface grinders  (Started: Jun. 8 2007, 22:18 ET, Last post: Jun. 9 2007, 05:13 ET)
A different approach
Dc motor source  (Started: Jun. 7 2007, 10:14 ET, Last post: Jun. 8 2007, 20:25 ET)
Best way to make a clean 1" hole?  (Started: Jun. 4 2007, 22:18 ET, Last post: Jun. 8 2007, 09:37 ET)
Plate used to tram mill  (Started: Jun. 1 2007, 22:32 ET, Last post: Jun. 6 2007, 02:00 ET)
Yuasa vs. phase ii rotary tables - same??  (Started: Jun. 4 2007, 14:09 ET, Last post: Jun. 4 2007, 17:13 ET)
Internal and external indexable threading tools  (Started: May 31 2007, 22:24 ET, Last post: Jun. 3 2007, 22:45 ET)
Anyone hava ones they like
Starting out with a mini mill questions  (Started: Jun. 3 2007, 14:54 ET, Last post: Jun. 3 2007, 20:21 ET)
Howdy, mind given me a little advice?  (Started: May 29 2007, 23:17 ET, Last post: Jun. 3 2007, 14:13 ET)
R-8 vs mt  (Started: May 27 2007, 07:52 ET, Last post: Jun. 2 2007, 20:21 ET)
Which and why?
Plasma cutters  (Started: May 29 2007, 15:19 ET, Last post: May 31 2007, 19:43 ET)
Does anyone use?
8620 vs 4140 steel for actions  (Started: Mar. 15 2007, 00:28 ET, Last post: May 30 2007, 14:39 ET)
Aluminum .338?  (Started: Mar. 17 2007, 13:11 ET, Last post: May 29 2007, 14:21 ET)
Need help with aluminum strength!
Just got a mini mill.  (Started: May 29 2007, 00:07 ET, Last post: May 29 2007, 09:39 ET)
$200 band saw blades  (Started: May 23 2007, 19:42 ET, Last post: May 27 2007, 12:50 ET)
Turing up mill to cut square  (Started: May 22 2007, 16:16 ET, Last post: May 27 2007, 00:43 ET)
Next newbe question.
Shapers  (Started: May 24 2007, 16:45 ET, Last post: May 25 2007, 22:04 ET)
Basic info
Enco rotary table!  anyone use 1????  (Started: May 14 2007, 11:13 ET, Last post: May 23 2007, 06:14 ET)
Mini band saw  (Started: May 12 2007, 11:08 ET, Last post: May 17 2007, 23:28 ET)
My space saving bench model
Super-weird... mislabeled taps  (Started: May 8 2007, 22:35 ET, Last post: May 17 2007, 13:41 ET)
I've never seen this
How to align the tailstock?  (Started: Apr. 16 2007, 04:40 ET, Last post: May 15 2007, 03:32 ET)
Fly cutters - instruction needed  (Started: May 13 2007, 08:58 ET, Last post: May 15 2007, 00:02 ET)
Newbe milling question
Grizzly mill dro?  (Started: May 8 2007, 17:15 ET, Last post: May 12 2007, 00:05 ET)
Power tapping on mill  (Started: May 1 2007, 15:18 ET, Last post: May 5 2007, 00:41 ET)
No quill, need help
Wow, these dro's are cool.  and cheap!  (Started: May 3 2007, 10:51 ET, Last post: May 3 2007, 19:48 ET)
From jigsaw  (Started: May 2 2007, 13:35 ET, Last post: May 2 2007, 19:20 ET)
Twin carbon arc torch
Lathe in so cal for sale  (Started: May 2 2007, 18:33 ET, Last post: May 2 2007, 18:33 ET)
Clausing 6913 - is it worth it???  (Started: Apr. 9 2007, 10:21 ET, Last post: May 2 2007, 16:32 ET)
Opinions please
Sharpening end mills  (Started: Feb. 16 2007, 05:12 ET, Last post: May 2 2007, 16:02 ET)
Anybody do it?
Making a wet lathe  (Started: Apr. 2 2007, 07:03 ET, Last post: May 2 2007, 15:43 ET)
What are you guys using for a cam package?  (Started: Apr. 13 2007, 22:27 ET, Last post: May 2 2007, 14:30 ET)
Fuzzbean can ignore this
Flex shaft handpiece review  (Started: May 2 2007, 10:41 ET, Last post: May 2 2007, 10:41 ET)
It's my birthday!  (Started: Apr. 30 2007, 08:27 ET, Last post: Apr. 30 2007, 21:52 ET)
4-30-60
Grizzly g9972z, spindle removal?  (Started: Apr. 23 2007, 21:42 ET, Last post: Apr. 30 2007, 17:46 ET)
How do i?
It's bandsaw time  (Started: Apr. 25 2007, 17:11 ET, Last post: Apr. 29 2007, 14:02 ET)
Small lathe for barrel chambering  (Started: Apr. 26 2007, 17:49 ET, Last post: Apr. 28 2007, 18:33 ET)
Bench top mill  (Started: Apr. 24 2007, 19:44 ET, Last post: Apr. 25 2007, 22:42 ET)
Bp mini mill
Bp re-build  (Started: Feb. 8 2007, 11:14 ET, Last post: Apr. 21 2007, 12:09 ET)
J-head headaches
Surface grinder  (Started: Apr. 14 2007, 20:27 ET, Last post: Apr. 20 2007, 21:47 ET)
Grinding the magnetic base?
Accident  (Started: Apr. 16 2007, 23:43 ET, Last post: Apr. 20 2007, 15:12 ET)
Mill fell over
Condition of the shop  (Started: Jul. 30 2006, 21:36 ET, Last post: Apr. 17 2007, 08:07 ET)
Fix a bad hole  (Started: Apr. 15 2007, 21:47 ET, Last post: Apr. 16 2007, 02:46 ET)
I screwed the pooch
What stuff would you like to get cheap?  (Started: Mar. 25 2007, 23:07 ET, Last post: Apr. 15 2007, 21:20 ET)
Help me pay for my cnc mill...
Got a new toy today  (Started: Apr. 12 2007, 02:32 ET, Last post: Apr. 14 2007, 07:10 ET)
How to chuck tapered barrel in lathe?  (Started: Apr. 11 2007, 18:09 ET, Last post: Apr. 12 2007, 09:52 ET)
Lathemaster mill modification  (Started: Apr. 9 2007, 10:03 ET, Last post: Apr. 11 2007, 08:14 ET)
Homebrew power lift for the gear head
Induction hardening anyone?  (Started: Apr. 2 2007, 16:14 ET, Last post: Apr. 9 2007, 12:39 ET)
Homebuilt induction heat treating?
Lathe questions  (Started: Apr. 7 2007, 15:08 ET, Last post: Apr. 9 2007, 09:13 ET)
Just found this link  (Started: Apr. 8 2007, 14:10 ET, Last post: Apr. 8 2007, 21:36 ET)
New to me.
Hf milling machine ?  (Started: Mar. 27 2007, 13:21 ET, Last post: Apr. 6 2007, 11:11 ET)
Leak!  (Started: Mar. 26 2007, 21:06 ET, Last post: Apr. 5 2007, 11:21 ET)
Lead screw material  (Started: Mar. 20 2007, 01:04 ET, Last post: Apr. 1 2007, 23:38 ET)
5/8-10
Phase two 5c collet indexer any good?  (Started: Mar. 28 2007, 21:01 ET, Last post: Apr. 1 2007, 16:39 ET)
Potential purchase
Broken vernier  (Started: Apr. 1 2007, 12:28 ET, Last post: Apr. 1 2007, 16:29 ET)
Lathe bed question  (Started: Apr. 1 2007, 04:10 ET, Last post: Apr. 1 2007, 09:58 ET)
Spin/indexer improvements  (Started: Feb. 6 2007, 04:01 ET, Last post: Mar. 31 2007, 00:37 ET)
For milling
Mounting plates and chucks for lathe  (Started: Mar. 29 2007, 17:57 ET, Last post: Mar. 30 2007, 17:46 ET)
Tig welder questions  (Started: Mar. 26 2007, 10:21 ET, Last post: Mar. 29 2007, 13:16 ET)
1911 rail cutter  (Started: Mar. 26 2007, 23:50 ET, Last post: Mar. 27 2007, 15:32 ET)
What is the recommended rpm?
What are your favorite end mills?  (Started: Mar. 26 2007, 12:17 ET, Last post: Mar. 27 2007, 12:45 ET)
Looking for good low cost end mills.
Fighting rust  (Started: Mar. 27 2007, 10:26 ET, Last post: Mar. 27 2007, 11:29 ET)
What a shaper!  (Started: Mar. 20 2007, 05:31 ET, Last post: Mar. 26 2007, 17:11 ET)
Drool, drool
Today’s project  (Started: Mar. 18 2007, 20:28 ET, Last post: Mar. 26 2007, 12:28 ET)
To be continued
Summit lathe 11 x 32 ?  (Started: Mar. 22 2007, 07:07 ET, Last post: Mar. 24 2007, 09:55 ET)
Any opinions?
Cnc retrofit  (Started: Jan. 21 2007, 15:24 ET, Last post: Mar. 22 2007, 20:17 ET)
Micro mill project
Some newbie ?s  (Started: Mar. 20 2007, 21:15 ET, Last post: Mar. 21 2007, 00:43 ET)
New toy  (Started: Mar. 13 2007, 22:36 ET, Last post: Mar. 19 2007, 19:49 ET)
Another piece of the puzzlecouple of wee
Hook cutter  (Started: Mar. 18 2007, 18:10 ET, Last post: Mar. 19 2007, 17:53 ET)
Source for "free machining" flat sock?  (Started: Mar. 13 2007, 00:24 ET, Last post: Mar. 17 2007, 18:47 ET)
12l14 rectangular bar stock availability
4"x36" belt sander/disc sander  (Started: Mar. 16 2007, 19:44 ET, Last post: Mar. 17 2007, 12:19 ET)
Any comments?
Lathe in san diego area  (Started: Mar. 17 2007, 01:11 ET, Last post: Mar. 17 2007, 01:11 ET)
What is a shaper?  (Started: Mar. 16 2007, 16:55 ET, Last post: Mar. 16 2007, 18:20 ET)
13x40 deal  (Started: Mar. 12 2007, 19:33 ET, Last post: Mar. 14 2007, 20:13 ET)
New lathe
Drill chuck  (Started: Mar. 11 2007, 21:44 ET, Last post: Mar. 13 2007, 10:28 ET)
I got a new mill too!  (Started: Feb. 19 2007, 14:17 ET, Last post: Mar. 12 2007, 16:59 ET)
Sieg x3
Sine bar rifling machine  (Started: Mar. 9 2007, 12:44 ET, Last post: Mar. 10 2007, 20:16 ET)
Link to rifling machine photo's
What to do with an atlas lathe?  (Started: Mar. 4 2007, 21:50 ET, Last post: Mar. 10 2007, 16:59 ET)
Thoughts on a power hone  (Started: Mar. 8 2007, 11:51 ET, Last post: Mar. 9 2007, 12:07 ET)
Why spend $500-$1,000?
Mounting a mill to the floor ?  (Started: Mar. 6 2007, 22:39 ET, Last post: Mar. 8 2007, 09:45 ET)
New mystery tool  (Started: Mar. 6 2007, 16:31 ET, Last post: Mar. 7 2007, 20:27 ET)
For the next fuzzbean adventure
Mac flat bending jig  (Started: Mar. 5 2007, 20:46 ET, Last post: Mar. 5 2007, 20:46 ET)
What is this?  (Started: Mar. 4 2007, 11:06 ET, Last post: Mar. 5 2007, 10:15 ET)
How is it used?
Chip maker web site  (Started: Mar. 4 2007, 09:48 ET, Last post: Mar. 5 2007, 01:37 ET)
Chip maker web site
Looking at a lathe, need opinion  (Started: Mar. 3 2007, 11:44 ET, Last post: Mar. 4 2007, 13:11 ET)
Doodad  (Started: Oct. 6 2006, 10:18 ET, Last post: Mar. 2 2007, 21:30 ET)
Riddle me this...
End mills  (Started: Feb. 27 2007, 12:04 ET, Last post: Mar. 1 2007, 21:38 ET)
Which brands
Tool porn!  (Started: Feb. 13 2007, 07:30 ET, Last post: Mar. 1 2007, 07:37 ET)
A fuzzbean build, sort of.  (Started: Feb. 25 2007, 15:21 ET, Last post: Feb. 27 2007, 18:16 ET)
A lot more basic.
Dumore tool post grinder  (Started: Feb. 26 2007, 15:44 ET, Last post: Feb. 27 2007, 11:09 ET)
Manual to cnc converting  (Started: Feb. 25 2007, 14:42 ET, Last post: Feb. 26 2007, 14:50 ET)
Mill upgrade questions
Problem with new mill  (Started: Feb. 26 2007, 09:19 ET, Last post: Feb. 26 2007, 12:57 ET)
The fuzzbean super-atomic metal morpher  (Started: Jan. 28 2007, 17:15 ET, Last post: Feb. 23 2007, 06:12 ET)
The final deathblow to cnc!
New sieg lathe  (Started: Feb. 18 2007, 12:59 ET, Last post: Feb. 23 2007, 05:31 ET)
Next fuzzbean project?
Keyway broach  (Started: Nov. 17 2006, 14:26 ET, Last post: Feb. 22 2007, 20:59 ET)
Equipping a mill  (Started: Feb. 6 2007, 10:20 ET, Last post: Feb. 14 2007, 19:47 ET)
Where to get cheap/used tooling?
2nd operation lathe w/rust on ways  (Started: Feb. 11 2007, 01:01 ET, Last post: Feb. 14 2007, 08:33 ET)
The death of cnc  (Started: Feb. 7 2007, 16:54 ET, Last post: Feb. 14 2007, 05:59 ET)
My crusade!
Blast cabinet troubleshooting  (Started: Feb. 10 2007, 18:35 ET, Last post: Feb. 13 2007, 09:14 ET)
Leather lathe belt  (Started: Oct. 29 2006, 22:59 ET, Last post: Feb. 9 2007, 10:12 ET)
How to groove old .22 reciever ?  (Started: Jan. 31 2007, 09:30 ET, Last post: Feb. 8 2007, 19:29 ET)
1st post
Shop setup-anchoring equipment?  (Started: Feb. 1 2007, 16:51 ET, Last post: Feb. 8 2007, 19:06 ET)
Large ebay mill west coast  (Started: Feb. 6 2007, 12:19 ET, Last post: Feb. 6 2007, 12:19 ET)
Helical cuts on manual machines?  (Started: Dec. 21 2006, 00:38 ET, Last post: Feb. 5 2007, 13:09 ET)
How to do it?
Seriuos  softfoot  (Started: Jan. 29 2007, 15:45 ET, Last post: Feb. 5 2007, 12:42 ET)
Mill balance
More machine tool setup  (Started: Feb. 2 2007, 10:32 ET, Last post: Feb. 5 2007, 12:35 ET)
Anchor?  level?  bah......
Adjustable tail stock center  (Started: Jan. 7 2007, 21:23 ET, Last post: Feb. 4 2007, 19:51 ET)
Questions on drilling a large hole  (Started: Feb. 2 2007, 14:13 ET, Last post: Feb. 3 2007, 21:47 ET)
My shaper  (Started: Jan. 30 2007, 21:07 ET, Last post: Feb. 3 2007, 16:50 ET)
An antique!
Got a question  (Started: Feb. 2 2007, 06:47 ET, Last post: Feb. 3 2007, 14:01 ET)
Building a mini mill  (Started: Jan. 17 2007, 17:46 ET, Last post: Feb. 2 2007, 10:23 ET)
Steel hardness  (Started: Jan. 26 2007, 18:43 ET, Last post: Jan. 29 2007, 00:32 ET)
To identify
Barrel rifling  (Started: Jan. 26 2007, 18:40 ET, Last post: Jan. 28 2007, 14:06 ET)
Home made
Spider  (Started: Jan. 28 2007, 01:17 ET, Last post: Jan. 28 2007, 14:00 ET)
Improving the lathe
Brown and sharp collets  (Started: Jan. 27 2007, 16:28 ET, Last post: Jan. 28 2007, 08:30 ET)
Looking for chart
What are these?  (Started: Jan. 27 2007, 12:06 ET, Last post: Jan. 27 2007, 21:56 ET)
Someone must know
Milling - how to undercut...  (Started: Jan. 25 2007, 21:59 ET, Last post: Jan. 27 2007, 20:14 ET)
What tool would you need?
Thoughts on grizley combo machine  (Started: Jan. 24 2007, 22:21 ET, Last post: Jan. 26 2007, 20:05 ET)
Mini mill dro  (Started: Jan. 24 2007, 23:59 ET, Last post: Jan. 26 2007, 17:12 ET)
350.00
Cutting threads on a Lathe?  (Started: Feb. 14 2002, 11:09 ET, Last post: Jan. 25 2007, 22:36 ET)
....any help appreciated.....
Barrel steel  (Started: Jan. 21 2007, 17:42 ET, Last post: Jan. 25 2007, 04:08 ET)
What material to use
Milling on a grizzly g9729 machine?  (Started: Jan. 21 2007, 16:02 ET, Last post: Jan. 25 2007, 01:07 ET)
Cast Iron Drilling question  (Started: Dec. 14 2001, 19:27 ET, Last post: Jan. 22 2007, 19:49 ET)
anyone know?
Mini-lathe owners...  (Started: Jan. 20 2007, 01:52 ET, Last post: Jan. 21 2007, 16:36 ET)
I need help.
Deep hole drilltip  (Started: Dec. 10 2006, 09:42 ET, Last post: Jan. 21 2007, 15:47 ET)
Make your own...
Threading problems  (Started: Oct. 29 2006, 18:28 ET, Last post: Jan. 21 2007, 15:00 ET)
What to do for variable speed  (Started: Dec. 6 2006, 03:12 ET, Last post: Jan. 21 2007, 14:43 ET)
Newbie needs some guidance  (Started: Dec. 12 2006, 11:16 ET, Last post: Jan. 21 2007, 14:32 ET)
Lathe/way  oil
Heat treating alloy steels  (Started: Jan. 16 2007, 13:26 ET, Last post: Jan. 21 2007, 01:06 ET)
Todays project  (Started: Jan. 14 2007, 20:47 ET, Last post: Jan. 19 2007, 16:25 ET)
Tungsten bar stock  (Started: Jan. 12 2007, 17:45 ET, Last post: Jan. 19 2007, 10:43 ET)
Bolt weight project
Need a lathe  (Started: Dec. 29 2006, 09:41 ET, Last post: Jan. 16 2007, 21:28 ET)
Which one?
Steady rest confusion  (Started: Dec. 16 2006, 15:47 ET, Last post: Jan. 15 2007, 20:15 ET)
Need a litle help
The fuzzbean mill  (Started: Jan. 12 2007, 19:49 ET, Last post: Jan. 14 2007, 20:33 ET)
The not so big vise  (Started: Jan. 11 2007, 21:46 ET, Last post: Jan. 12 2007, 22:22 ET)
R8 precision collet question???  (Started: Jan. 12 2007, 15:27 ET, Last post: Jan. 12 2007, 16:38 ET)
First mill?  (Started: Dec. 29 2006, 11:26 ET, Last post: Jan. 11 2007, 10:43 ET)
Need advise.
Harbor freight inverter welder  (Started: Jan. 3 2007, 18:56 ET, Last post: Jan. 7 2007, 21:39 ET)
I like it!
5x6 bandsaw  (Started: Jan. 5 2007, 16:25 ET, Last post: Jan. 7 2007, 13:47 ET)
New iron, or at least new to us  (Started: Jan. 4 2007, 18:20 ET, Last post: Jan. 5 2007, 09:11 ET)
Mini-mill  (Started: Dec. 13 2006, 02:08 ET, Last post: Jan. 3 2007, 12:38 ET)
Should i make the sacrifice?
Anyone in the southeast need a lathe?  (Started: Nov. 7 2006, 13:35 ET, Last post: Dec. 30 2006, 22:30 ET)
Grease and oil  (Started: Dec. 24 2006, 17:23 ET, Last post: Dec. 25 2006, 13:10 ET)
Which for what and why?
Lathe and testing concentrics  (Started: Dec. 15 2006, 23:12 ET, Last post: Dec. 24 2006, 13:45 ET)
Foundry work with a buddy  (Started: Oct. 22 2006, 23:02 ET, Last post: Dec. 17 2006, 23:40 ET)
Cope & drag
Belt grinder  (Started: Nov. 1 2006, 19:25 ET, Last post: Dec. 14 2006, 22:32 ET)
Idler wheels
My new welder  (Started: Oct. 23 2006, 07:55 ET, Last post: Dec. 14 2006, 21:10 ET)
Awesome power
Another homemade tap, and a cross feed nut  (Started: Dec. 10 2006, 16:53 ET, Last post: Dec. 11 2006, 19:54 ET)
Left hand square thread
Decent air compressor?  (Started: Dec. 10 2006, 12:29 ET, Last post: Dec. 10 2006, 15:08 ET)
Discount tooling  (Started: Dec. 6 2006, 23:50 ET, Last post: Dec. 6 2006, 23:50 ET)
Chicken or the egg?  (Started: Nov. 27 2006, 23:43 ET, Last post: Dec. 6 2006, 09:25 ET)
Machinist question.
Gear cutter.  (Started: Nov. 1 2006, 14:53 ET, Last post: Dec. 2 2006, 09:19 ET)
Lathe steady rest  (Started: Nov. 5 2006, 18:01 ET, Last post: Dec. 1 2006, 01:57 ET)
Been needing one
What are these like?  (Started: Nov. 12 2006, 03:09 ET, Last post: Nov. 28 2006, 21:28 ET)
Macson verticle milling machine
Dro mounting  (Started: Nov. 20 2006, 18:45 ET, Last post: Nov. 27 2006, 07:56 ET)
Dro chip guard  (Started: Nov. 21 2006, 15:37 ET, Last post: Nov. 23 2006, 03:09 ET)
Drill doctor  (Started: Nov. 13 2006, 01:13 ET, Last post: Nov. 15 2006, 19:31 ET)
Delta rockwell lathe  (Started: Oct. 23 2006, 13:21 ET, Last post: Nov. 12 2006, 22:00 ET)
Just bought a used lathe
Levelling a lathe  (Started: Nov. 6 2006, 21:49 ET, Last post: Nov. 12 2006, 21:44 ET)
On a garage floor
Anyone have info on gmc lathes?  (Started: Nov. 10 2006, 09:45 ET, Last post: Nov. 12 2006, 11:58 ET)
I am in a quandry
New bender  (Started: Nov. 10 2006, 14:40 ET, Last post: Nov. 11 2006, 20:48 ET)
Hossfeld no !
Indexer stopper  (Started: Nov. 11 2006, 06:36 ET, Last post: Nov. 11 2006, 07:57 ET)
Quick & dirty
Enco lathe 13 x 40 gear head lathe  (Started: Oct. 31 2006, 17:56 ET, Last post: Nov. 8 2006, 20:17 ET)
It’s amateur hour… is it a good lathe?
Lathe wanted  (Started: Nov. 3 2006, 10:57 ET, Last post: Nov. 5 2006, 09:08 ET)
Learn from my mistake  (Started: Oct. 26 2006, 10:09 ET, Last post: Nov. 4 2006, 21:36 ET)
The fuzzbean files: plausible threat  (Started: Nov. 3 2006, 07:00 ET, Last post: Nov. 4 2006, 03:57 ET)
Er, i mean, lathe widgets
More free machinist manuals  (Started: Nov. 3 2006, 08:20 ET, Last post: Nov. 3 2006, 08:59 ET)
Lathe size  (Started: Oct. 30 2006, 20:17 ET, Last post: Oct. 31 2006, 20:02 ET)
How small can you go
Industrial hobbies mill  (Started: Oct. 27 2006, 06:57 ET, Last post: Oct. 29 2006, 16:18 ET)
Southern cal  shaper  (Started: Oct. 27 2006, 12:45 ET, Last post: Oct. 27 2006, 19:17 ET)
Micro mill  (Started: Oct. 22 2006, 02:21 ET, Last post: Oct. 26 2006, 18:26 ET)
For apartment shop
Free machinist manuals  (Started: Oct. 23 2006, 08:20 ET, Last post: Oct. 25 2006, 17:33 ET)
Older material
Milling machine  (Started: Oct. 15 2006, 22:54 ET, Last post: Oct. 23 2006, 01:38 ET)
Lathe speed question  (Started: Oct. 21 2006, 06:36 ET, Last post: Oct. 22 2006, 23:36 ET)
Looking for ideas  (Started: Oct. 20 2006, 02:11 ET, Last post: Oct. 22 2006, 20:41 ET)
Need tail stock for indexer.  (Started: Oct. 21 2006, 23:54 ET, Last post: Oct. 21 2006, 23:54 ET)
Surface preparation for p228 refinish  (Started: Oct. 19 2006, 18:05 ET, Last post: Oct. 20 2006, 13:22 ET)
Good links  (Started: Oct. 19 2006, 10:24 ET, Last post: Oct. 20 2006, 00:03 ET)
Lathe gadgets
Blueprint reading  (Started: Oct. 19 2006, 19:24 ET, Last post: Oct. 19 2006, 19:36 ET)
Many changes since 1941?
How would i go about engraving designs on metal?  (Started: Oct. 17 2006, 10:48 ET, Last post: Oct. 19 2006, 11:01 ET)
Building a multimachine  (Started: Oct. 13 2006, 22:39 ET, Last post: Oct. 17 2006, 23:43 ET)
What size scales for a dro for 9x32 bp?  (Started: Oct. 11 2006, 13:54 ET, Last post: Oct. 16 2006, 10:33 ET)
I got a bridgeport!
Taping aluminum  (Started: Sep. 23 2006, 02:05 ET, Last post: Oct. 14 2006, 09:02 ET)
First sparks,  (Started: Oct. 10 2006, 22:44 ET, Last post: Oct. 12 2006, 20:46 ET)
And a hole
Installing a dro  (Started: Oct. 11 2006, 11:54 ET, Last post: Oct. 12 2006, 16:42 ET)
How to
Improving the shop through scrounging  (Started: Aug. 13 2005, 20:09 ET, Last post: Oct. 10 2006, 20:23 ET)
Various upgrades as i do them
New tools!  (Started: Oct. 6 2006, 09:37 ET, Last post: Oct. 8 2006, 06:08 ET)
Life is good
Spin index for $30-$40 on ebay  (Started: Oct. 5 2006, 15:21 ET, Last post: Oct. 5 2006, 21:04 ET)
Does anybody have experience with these?
Boring questions from a lathe noob  (Started: Sep. 22 2006, 09:29 ET, Last post: Oct. 3 2006, 10:00 ET)
Carbide vs. hss tooling and cutters  (Started: Sep. 30 2006, 11:08 ET, Last post: Oct. 2 2006, 19:10 ET)
Some observations over the years
Need your input  (Started: Oct. 2 2006, 09:44 ET, Last post: Oct. 2 2006, 19:02 ET)
Lathe tool post grinder
How hard to install a dro?  (Started: Sep. 22 2006, 17:21 ET, Last post: Oct. 1 2006, 12:54 ET)
Uses for and can't do's - mini mill/lathe  (Started: Sep. 26 2006, 16:58 ET, Last post: Oct. 1 2006, 02:50 ET)
1/2 x 28 tpi and 1/2 unf, are the same?  (Started: Sep. 29 2006, 09:10 ET, Last post: Sep. 30 2006, 19:57 ET)
Spin fixture  (Started: Sep. 28 2006, 09:23 ET, Last post: Sep. 30 2006, 10:46 ET)
And improvised indexing
Barrel making  (Started: Sep. 28 2006, 11:07 ET, Last post: Sep. 29 2006, 18:53 ET)
Where can i get the dvd?
Rifling and rifle making  (Started: Sep. 29 2006, 07:26 ET, Last post: Sep. 29 2006, 07:26 ET)
Wishful thinking?  (Started: Sep. 25 2006, 21:05 ET, Last post: Sep. 29 2006, 00:06 ET)
Ebay "deal"
Hardcore tools  (Started: Sep. 22 2006, 11:19 ET, Last post: Sep. 28 2006, 15:13 ET)
Tempering equipment, rifling machines
First mini-mill  (Started: Sep. 24 2006, 05:31 ET, Last post: Sep. 25 2006, 18:32 ET)
Input! input!
First lathe help needed!  (Started: Sep. 18 2006, 18:00 ET, Last post: Sep. 23 2006, 13:05 ET)
What does this mean?  "gibbs" ?  (Started: Sep. 22 2006, 16:01 ET, Last post: Sep. 23 2006, 11:22 ET)
Yard sale stuff  (Started: Sep. 16 2006, 23:18 ET, Last post: Sep. 23 2006, 08:34 ET)
While i was at the gunshow
American iron  (Started: Sep. 2 2006, 13:25 ET, Last post: Sep. 22 2006, 18:33 ET)
I got some!
History reclaimed  (Started: Sep. 21 2006, 07:53 ET, Last post: Sep. 21 2006, 19:09 ET)
Wright brothers' air compressor found
More iron  (Started: Sep. 19 2006, 11:10 ET, Last post: Sep. 21 2006, 08:45 ET)
Cnc problems  (Started: Sep. 18 2006, 23:14 ET, Last post: Sep. 20 2006, 18:04 ET)
Surface grinder  (Started: Sep. 19 2006, 00:28 ET, Last post: Sep. 20 2006, 16:36 ET)
What good are they?
Belt grinder vs. belt sander  (Started: Sep. 19 2006, 00:51 ET, Last post: Sep. 19 2006, 17:12 ET)
What?
Group buy?  (Started: Sep. 11 2006, 12:52 ET, Last post: Sep. 19 2006, 11:18 ET)
The greatest week of my life. i think!  (Started: Sep. 17 2006, 21:44 ET, Last post: Sep. 19 2006, 09:56 ET)
12 volt spot welder  (Started: Aug. 12 2006, 19:47 ET, Last post: Sep. 18 2006, 20:03 ET)
Sand casting  (Started: Sep. 7 2006, 17:36 ET, Last post: Sep. 17 2006, 14:00 ET)
Idea for lost-wax type casting...
220 volt machine wiring question  (Started: Aug. 27 2006, 17:31 ET, Last post: Sep. 16 2006, 14:10 ET)
.884 drill bits  (Started: Jul. 26 2006, 00:24 ET, Last post: Sep. 13 2006, 16:48 ET)
What to do with them.
Lathe question  (Started: Sep. 3 2006, 08:10 ET, Last post: Sep. 13 2006, 14:55 ET)
Lathe and vfd  (Started: Sep. 8 2006, 15:54 ET, Last post: Sep. 11 2006, 09:05 ET)
Anyone ever done it
Milling machine grease  (Started: Aug. 22 2006, 21:43 ET, Last post: Sep. 11 2006, 04:45 ET)
What best to use?
Lathe finaly on the way  (Started: Sep. 9 2006, 01:06 ET, Last post: Sep. 10 2006, 17:54 ET)
Dro repair  (Started: Sep. 8 2006, 12:26 ET, Last post: Sep. 8 2006, 12:26 ET)
Good trick
Qctp  (Started: Sep. 7 2006, 05:19 ET, Last post: Sep. 8 2006, 00:32 ET)
Mini-lathe and general ?s
I've sinned  (Started: Aug. 31 2006, 21:12 ET, Last post: Sep. 7 2006, 07:20 ET)
Watch me drill  (Started: Aug. 30 2006, 02:05 ET, Last post: Sep. 5 2006, 08:26 ET)
Fixing wife's watch
Azteca lathe  (Started: Sep. 3 2006, 22:40 ET, Last post: Sep. 4 2006, 23:06 ET)
Knurling  (Started: Jul. 31 2006, 13:35 ET, Last post: Sep. 1 2006, 06:20 ET)
Horizontal edge grinder  (Started: Aug. 15 2006, 23:36 ET, Last post: Aug. 28 2006, 22:19 ET)
Built this to grind marksman receiver
Interior threading on mini lathe  (Started: Aug. 11 2006, 16:33 ET, Last post: Aug. 23 2006, 09:14 ET)
Pictures please!
Got a used edm  (Started: Aug. 15 2006, 20:04 ET, Last post: Aug. 22 2006, 08:18 ET)
E-bay find
Ldpe or steel blaster cabinet ?  (Started: Aug. 21 2006, 16:37 ET, Last post: Aug. 21 2006, 22:37 ET)
Concrete lathe bench  (Started: Aug. 1 2006, 06:38 ET, Last post: Aug. 21 2006, 22:04 ET)
Drilling holes top dead center  (Started: Aug. 15 2006, 18:16 ET, Last post: Aug. 18 2006, 22:24 ET)
Ebay museum piece  (Started: Aug. 17 2006, 12:38 ET, Last post: Aug. 18 2006, 10:30 ET)
Horizontal edge grinder  (Started: Aug. 15 2006, 23:43 ET, Last post: Aug. 17 2006, 18:15 ET)
Built this to grind my marksman receiver
Lathe setup question  (Started: Aug. 15 2006, 16:50 ET, Last post: Aug. 17 2006, 10:01 ET)
Leveling a lathe  (Started: Aug. 2 2006, 11:20 ET, Last post: Aug. 16 2006, 18:27 ET)
Driving me crazy!
Trash to treasure  (Started: Jul. 31 2006, 07:30 ET, Last post: Aug. 14 2006, 23:19 ET)
Making something from nothing
Milling machine parts  (Started: Jul. 18 2006, 01:21 ET, Last post: Aug. 14 2006, 14:48 ET)
Need custom pieces cut
Need advice on mills  (Started: Aug. 11 2006, 09:51 ET, Last post: Aug. 14 2006, 09:07 ET)
And other machines
Automatic filing machine  (Started: Aug. 10 2006, 10:02 ET, Last post: Aug. 12 2006, 00:55 ET)
What do ya'll think about this mill?  (Started: Jul. 29 2006, 12:36 ET, Last post: Aug. 11 2006, 07:51 ET)
Budget abrasive blaster recommendations?  (Started: Jul. 30 2006, 20:15 ET, Last post: Jul. 30 2006, 23:37 ET)
Hydraulic/pneumatic follower  (Started: Jul. 16 2006, 10:26 ET, Last post: Jul. 30 2006, 15:38 ET)
I need help finding parts for a belt sander  (Started: Jul. 29 2006, 15:01 ET, Last post: Jul. 29 2006, 19:48 ET)
Tooling for lathe  (Started: Jul. 18 2006, 23:00 ET, Last post: Jul. 25 2006, 08:04 ET)
Scope/sight mounting  (Started: Jul. 24 2006, 12:27 ET, Last post: Jul. 25 2006, 01:00 ET)
Non-commercial sale  (Started: Jul. 21 2006, 16:17 ET, Last post: Jul. 24 2006, 17:13 ET)
My clausing rebuild  (Started: Dec. 17 2005, 18:18 ET, Last post: Jul. 23 2006, 01:11 ET)
Yup i'm crazy
V-belt  (Started: Jul. 18 2006, 11:58 ET, Last post: Jul. 18 2006, 23:49 ET)
Surface grinding  (Started: Jul. 14 2006, 16:03 ET, Last post: Jul. 18 2006, 22:05 ET)
Home built lathe  (Started: Feb. 4 2006, 17:40 ET, Last post: Jul. 17 2006, 19:11 ET)
Building a bolt together lathe
Mini mill  (Started: Jul. 16 2006, 22:44 ET, Last post: Jul. 17 2006, 15:10 ET)
Precision measuring site  (Started: Jul. 15 2006, 09:16 ET, Last post: Jul. 15 2006, 15:26 ET)
Lathe leveling  (Started: Jul. 15 2006, 12:17 ET, Last post: Jul. 15 2006, 14:25 ET)
It really helped
Cold air gun coolant systemsystems  (Started: Jul. 9 2006, 00:17 ET, Last post: Jul. 13 2006, 19:29 ET)
Building from scratch  (Started: Jul. 9 2006, 09:50 ET, Last post: Jul. 11 2006, 23:31 ET)
Where can i learn more about machining
Safety in machining  (Started: Jul. 10 2006, 06:58 ET, Last post: Jul. 11 2006, 22:11 ET)
Cutting mortises  (Started: Jun. 28 2006, 21:22 ET, Last post: Jul. 11 2006, 00:10 ET)
Gas spring _ swede????  (Started: Jul. 6 2006, 06:31 ET, Last post: Jul. 9 2006, 21:16 ET)
Gas spring for mill head
Lathe question...  (Started: Jul. 5 2006, 23:55 ET, Last post: Jul. 6 2006, 01:08 ET)
Reamers  (Started: Jul. 2 2006, 09:11 ET, Last post: Jul. 2 2006, 13:12 ET)
I just bought some new machine tools  (Started: Apr. 1 2006, 00:29 ET, Last post: Jul. 2 2006, 12:38 ET)
Mini mill & lathe, metal cuttin band saw
D series spindle or threaded spindle  (Started: Jun. 29 2006, 17:08 ET, Last post: Jul. 1 2006, 15:56 ET)
Choosing a lathe  (Started: Jun. 29 2006, 01:07 ET, Last post: Jul. 1 2006, 08:53 ET)
Collet closer  (Started: Jun. 30 2006, 10:14 ET, Last post: Jun. 30 2006, 20:03 ET)
Warning:  not for dial-up connectins!
Finishing a barrel blank  (Started: Jun. 20 2006, 09:13 ET, Last post: Jun. 29 2006, 21:27 ET)
Which operation first?
Broaching machine  (Started: Jun. 24 2006, 11:51 ET, Last post: Jun. 28 2006, 04:25 ET)
Home/small shop broaching
Single stage and single stage regulators  (Started: Jun. 24 2006, 08:25 ET, Last post: Jun. 27 2006, 07:41 ET)
How to tell the difference
Edm on ebone  (Started: Jun. 21 2006, 09:55 ET, Last post: Jun. 24 2006, 09:27 ET)
Are these taps used in gunsmithing?  (Started: Jun. 22 2006, 12:28 ET, Last post: Jun. 23 2006, 18:17 ET)
Milling atachment  (Started: Jun. 21 2006, 17:38 ET, Last post: Jun. 23 2006, 08:28 ET)
For the drill press
Dimensiones of bridgeport mill  (Started: Jun. 21 2006, 23:18 ET, Last post: Jun. 23 2006, 02:09 ET)
Wire for mig welder  (Started: Jun. 23 2006, 01:43 ET, Last post: Jun. 23 2006, 01:43 ET)
New to machining  (Started: Jun. 5 2006, 15:20 ET, Last post: Jun. 22 2006, 12:00 ET)
Cutts comp  (Started: Jun. 21 2006, 19:04 ET, Last post: Jun. 21 2006, 22:13 ET)
Cutts drawing
Sine bar help needed  (Started: Jun. 13 2006, 09:02 ET, Last post: Jun. 15 2006, 23:36 ET)
My new saw, a neat little oldtimer!  (Started: Jun. 13 2006, 07:47 ET, Last post: Jun. 14 2006, 07:26 ET)
Couldn't resist.
Colt saa receiver how are they made??  (Started: Jun. 13 2006, 14:23 ET, Last post: Jun. 13 2006, 19:23 ET)
Flat bottom counterbore w/ drill press  (Started: Jun. 12 2006, 05:26 ET, Last post: Jun. 12 2006, 08:08 ET)
What kind of bit do i need
Drill press sugestions  (Started: Jun. 8 2006, 22:20 ET, Last post: Jun. 11 2006, 20:33 ET)
Tramming a bridgeport  (Started: Jun. 6 2006, 19:30 ET, Last post: Jun. 10 2006, 10:16 ET)
The brake disk idea...
My new lathe stopped working  (Started: Jun. 4 2006, 01:04 ET, Last post: Jun. 10 2006, 07:43 ET)
A pop, a flash, then nothing
Mini lathes  (Started: Jun. 5 2006, 18:37 ET, Last post: Jun. 8 2006, 15:33 ET)
Plastic gears
Barell source...  (Started: Jun. 2 2006, 21:50 ET, Last post: Jun. 7 2006, 21:42 ET)
Cheap aluminum  (Started: Jun. 6 2006, 22:19 ET, Last post: Jun. 7 2006, 19:09 ET)
What type?
Virtual tour of machining plant  (Started: Jun. 5 2006, 10:07 ET, Last post: Jun. 7 2006, 14:20 ET)
For sti guns including 2011 pistols
Mini lathe broken gear change  (Started: Jun. 1 2006, 02:03 ET, Last post: Jun. 6 2006, 07:35 ET)
Any pics of how?
Yucky stuff from grinder  (Started: May 25 2006, 11:03 ET, Last post: Jun. 2 2006, 17:22 ET)
Milling attachment  (Started: May 15 2006, 06:55 ET, Last post: Jun. 2 2006, 17:17 ET)
For lathe?
Best mill for 500 to 800  (Started: Feb. 21 2006, 23:04 ET, Last post: May 30 2006, 21:47 ET)
Lathemaster or smith mill?  (Started: Jan. 31 2006, 23:33 ET, Last post: May 30 2006, 16:22 ET)
Dro g3103  (Started: May 20 2006, 01:46 ET, Last post: May 26 2006, 01:57 ET)
Sizing mill for gunsmithing work  (Started: May 19 2006, 02:32 ET, Last post: May 25 2006, 09:20 ET)
Garage sale find!  (Started: May 2 2006, 01:01 ET, Last post: May 19 2006, 10:13 ET)
Sieg x3 mill/drills  (Started: May 10 2006, 01:48 ET, Last post: May 17 2006, 12:41 ET)
Anyone here seen/have one
Basement machine shop ?  (Started: Apr. 25 2006, 10:46 ET, Last post: May 15 2006, 08:55 ET)
Dealing with humidity?
Cheap starter mill  (Started: May 14 2006, 22:21 ET, Last post: May 15 2006, 08:47 ET)
What are some good ones?
? on flycutter and minimill  (Started: May 8 2006, 22:14 ET, Last post: May 13 2006, 17:26 ET)
Good mill?  (Started: May 12 2006, 10:29 ET, Last post: May 13 2006, 01:13 ET)
Micromark mini-mills & mini-lathes  (Started: May 10 2006, 16:03 ET, Last post: May 12 2006, 07:52 ET)
Help with 1911 barrel  (Started: Feb. 28 2006, 10:23 ET, Last post: May 10 2006, 20:59 ET)
Getting the mill....now moving it???  (Started: Apr. 28 2006, 09:26 ET, Last post: May 10 2006, 20:21 ET)
These suckers are huge
Mill or lathe first  (Started: Apr. 26 2006, 21:54 ET, Last post: May 10 2006, 04:17 ET)
Your opinions or experience
Got a used surface grinder  (Started: Apr. 20 2006, 23:36 ET, Last post: May 8 2006, 18:30 ET)
Small & needs work
Auction find!  (Started: May 3 2006, 10:04 ET, Last post: May 7 2006, 01:37 ET)
Smithy 3 in 1  (Started: Apr. 14 2006, 22:31 ET, Last post: May 4 2006, 23:29 ET)
Mini mill belt drive conversion  (Started: May 1 2006, 22:04 ET, Last post: May 4 2006, 04:37 ET)
Anyone else have one?
Surplus lathe question  (Started: Apr. 21 2006, 13:42 ET, Last post: Apr. 24 2006, 13:39 ET)
Combo machines?  (Started: Apr. 4 2006, 01:10 ET, Last post: Apr. 21 2006, 22:56 ET)
Vintage projects plans  (Started: Apr. 15 2006, 21:06 ET, Last post: Apr. 21 2006, 08:28 ET)
Try it, you might like it.
Ebay lathe in maryland  (Started: Apr. 19 2006, 17:51 ET, Last post: Apr. 20 2006, 01:12 ET)
Rifling a barrel??  (Started: Apr. 6 2006, 13:27 ET, Last post: Apr. 18 2006, 23:53 ET)
"tool room" designation means what?  (Started: Apr. 14 2006, 15:20 ET, Last post: Apr. 17 2006, 09:59 ET)
Cnc bridgeport series 1  (Started: Apr. 15 2006, 23:21 ET, Last post: Apr. 15 2006, 23:21 ET)
New addition to my family  (Started: Apr. 10 2006, 02:04 ET, Last post: Apr. 14 2006, 16:15 ET)
Accuracy of a 50 year old bridgeport  (Started: Apr. 11 2006, 18:50 ET, Last post: Apr. 11 2006, 23:40 ET)
Collet adapter needed  (Started: Apr. 10 2006, 16:19 ET, Last post: Apr. 10 2006, 16:19 ET)
Complete mini shop!  (Started: Apr. 9 2006, 16:12 ET, Last post: Apr. 10 2006, 07:02 ET)
If you live in fla
Mini mill opinions  (Started: Apr. 9 2006, 18:10 ET, Last post: Apr. 9 2006, 18:10 ET)
Suggestions on a mill  (Started: Mar. 21 2006, 19:16 ET, Last post: Apr. 9 2006, 14:34 ET)
Need some suggestions please
Info on central machinery lathe  (Started: Mar. 26 2006, 00:28 ET, Last post: Apr. 9 2006, 09:31 ET)
Lathe selection
Shaper tool sort of  (Started: Apr. 1 2006, 15:13 ET, Last post: Apr. 7 2006, 22:09 ET)
Anyone try this?
Spindle bore?  (Started: Apr. 4 2006, 23:49 ET, Last post: Apr. 6 2006, 09:27 ET)
Has anybody used the taig mimi mill  (Started: Mar. 8 2006, 18:54 ET, Last post: Mar. 31 2006, 01:13 ET)
Link in side
Scraping to fit  (Started: Jan. 5 2006, 22:36 ET, Last post: Mar. 30 2006, 18:50 ET)
Scraping high strength steel to fit
Buttress thread  (Started: Mar. 22 2006, 22:06 ET, Last post: Mar. 29 2006, 16:28 ET)
Can anyone help me with this
End mills in a drill press  (Started: Mar. 28 2006, 17:36 ET, Last post: Mar. 29 2006, 12:31 ET)
Flat belt  (Started: Mar. 7 2006, 16:25 ET, Last post: Mar. 22 2006, 17:35 ET)
Help on how to make a part.  (Started: Mar. 20 2006, 22:49 ET, Last post: Mar. 22 2006, 13:52 ET)
Equipment selection help.  (Started: Mar. 21 2006, 16:52 ET, Last post: Mar. 22 2006, 02:54 ET)
Bullet mold vise  (Started: Mar. 19 2006, 14:47 ET, Last post: Mar. 20 2006, 14:35 ET)
Build a vise to center molds to cut hole
Combo machine  (Started: Mar. 14 2006, 10:16 ET, Last post: Mar. 19 2006, 11:22 ET)
I could live with this
Harbor freight sale  (Started: Mar. 3 2006, 14:56 ET, Last post: Mar. 13 2006, 15:19 ET)
Tool grinder
Making cuts/boring with a mill?  (Started: Mar. 6 2006, 16:33 ET, Last post: Mar. 13 2006, 11:39 ET)
Advice needed with lathe tooling  (Started: Mar. 4 2006, 09:53 ET, Last post: Mar. 11 2006, 22:58 ET)
Heat treatment of o-1  (Started: Mar. 10 2006, 08:10 ET, Last post: Mar. 11 2006, 20:21 ET)
It's handy stuff
First crack at scraping  (Started: Mar. 4 2006, 17:26 ET, Last post: Mar. 9 2006, 15:19 ET)
Lathe oil  (Started: Mar. 3 2006, 20:11 ET, Last post: Mar. 8 2006, 21:25 ET)
Reverse  (Started: Mar. 6 2006, 09:44 ET, Last post: Mar. 8 2006, 01:03 ET)
Information on mills  (Started: Mar. 6 2006, 17:02 ET, Last post: Mar. 6 2006, 17:02 ET)
Cummins min-lathe?  (Started: Feb. 22 2006, 22:11 ET, Last post: Mar. 6 2006, 15:00 ET)
Thinking about buying one
Broaching with log splitter?  (Started: Mar. 1 2006, 15:36 ET, Last post: Mar. 5 2006, 02:32 ET)
Tig welder selection  (Started: Jan. 10 2006, 22:59 ET, Last post: Mar. 4 2006, 23:54 ET)
Metal bending and tolerances  (Started: Mar. 4 2006, 20:35 ET, Last post: Mar. 4 2006, 23:50 ET)
I need a little help
Abrasive blasting gun  (Started: Feb. 28 2006, 22:36 ET, Last post: Mar. 3 2006, 15:24 ET)
Learning to use a mini mill  (Started: Feb. 28 2006, 23:35 ET, Last post: Mar. 1 2006, 12:07 ET)
Bead blaster gloves  (Started: Feb. 25 2006, 09:33 ET, Last post: Feb. 28 2006, 22:33 ET)
For cheapo harbor freight unit
New lathe in the garage  (Started: Feb. 13 2006, 23:21 ET, Last post: Feb. 24 2006, 23:14 ET)
Did i mention my wife's a keeper?
Lost prior post  (Started: Feb. 20 2006, 13:51 ET, Last post: Feb. 24 2006, 09:26 ET)
Inside the spindle self centering center
Parting safely  (Started: Feb. 23 2006, 00:28 ET, Last post: Feb. 23 2006, 23:07 ET)
Or, i'd like to keep all of my fingers
New to metal machining  (Started: Feb. 21 2006, 21:18 ET, Last post: Feb. 23 2006, 07:53 ET)
Too much white?  (Started: Feb. 22 2006, 01:16 ET, Last post: Feb. 23 2006, 01:17 ET)
Torquing bolts ?  (Started: Feb. 16 2006, 01:12 ET, Last post: Feb. 22 2006, 23:19 ET)
Mini mill question  (Started: Feb. 19 2006, 00:35 ET, Last post: Feb. 20 2006, 00:55 ET)
Should i buy this?
Rotary files  (Started: Feb. 14 2006, 22:45 ET, Last post: Feb. 18 2006, 19:43 ET)
Supply needed
Depth micro meter  (Started: Feb. 6 2006, 23:35 ET, Last post: Feb. 17 2006, 02:39 ET)
Grizzly milling machines  (Started: Feb. 14 2006, 09:45 ET, Last post: Feb. 15 2006, 09:45 ET)
Speed adjustment
Enco lathe need help  (Started: Feb. 1 2006, 20:25 ET, Last post: Feb. 13 2006, 03:40 ET)
Glad i didn't brag on it
Any thoughts on the sieg x3  (Started: Feb. 4 2006, 10:15 ET, Last post: Feb. 12 2006, 12:37 ET)
Duracoat for machinery?  (Started: Feb. 6 2006, 21:36 ET, Last post: Feb. 6 2006, 23:06 ET)
Getting decent finish on barrel  (Started: Jan. 31 2006, 21:48 ET, Last post: Feb. 5 2006, 23:01 ET)
Best mini-lathe for threading & knurling?  (Started: Feb. 3 2006, 19:26 ET, Last post: Feb. 4 2006, 04:41 ET)
Brass aluminum, & steel small parts work
I know your not to keen on harbor freight welders  (Started: Jan. 31 2006, 17:14 ET, Last post: Feb. 1 2006, 14:34 ET)
But what about lathes?
Help with mist cooling setup  (Started: Jan. 29 2006, 23:35 ET, Last post: Jan. 31 2006, 22:37 ET)
Hardness tester  (Started: Jan. 30 2006, 01:57 ET, Last post: Jan. 31 2006, 01:01 ET)
Selecting a machine  (Started: Jan. 19 2006, 15:02 ET, Last post: Jan. 30 2006, 23:45 ET)
For newbies - my experience shared
Knurling  (Started: Jan. 29 2006, 22:23 ET, Last post: Jan. 30 2006, 21:33 ET)
Learning machining  (Started: Jan. 28 2006, 19:33 ET, Last post: Jan. 29 2006, 15:54 ET)
Resources for beginners
Steady rest  (Started: Dec. 20 2005, 17:40 ET, Last post: Jan. 28 2006, 08:26 ET)
Finally
Opinions on craftsman lathes  (Started: Jan. 25 2006, 20:51 ET, Last post: Jan. 28 2006, 02:21 ET)
Been offered a deal on a craftsman lathe
Unimat lathe/mill  (Started: Jan. 13 2006, 20:03 ET, Last post: Jan. 25 2006, 22:23 ET)
Bridgeport gadgets  (Started: Jan. 15 2006, 05:31 ET, Last post: Jan. 18 2006, 12:31 ET)
Convenient to have
Mini lathe?  yes or no?  (Started: Jan. 4 2006, 22:42 ET, Last post: Jan. 18 2006, 09:24 ET)
Lathe face plate  (Started: Jan. 7 2006, 21:24 ET, Last post: Jan. 18 2006, 01:39 ET)
From scratch, lots of pics.
Dro accuracy  (Started: Jan. 17 2006, 18:02 ET, Last post: Jan. 17 2006, 19:47 ET)
How do you check um?
Show  (Started: Jan. 17 2006, 16:38 ET, Last post: Jan. 17 2006, 16:38 ET)
How often do you really clean your machines?  (Started: Jan. 14 2006, 18:33 ET, Last post: Jan. 17 2006, 11:20 ET)
New tool post and lathe dog  (Started: Jan. 16 2006, 00:40 ET, Last post: Jan. 17 2006, 02:35 ET)
Madjack helped me out
Welders  (Started: Jan. 13 2006, 11:41 ET, Last post: Jan. 14 2006, 01:12 ET)
Score!  (Started: Jan. 2 2006, 08:38 ET, Last post: Jan. 13 2006, 18:27 ET)
Metal lathe
Variable frequency drive  (Started: Jan. 7 2006, 11:58 ET, Last post: Jan. 13 2006, 15:15 ET)
For g3103 mill
Machining book  (Started: Jan. 2 2006, 18:39 ET, Last post: Jan. 10 2006, 17:58 ET)
Tight r8 boring head arbor  (Started: Jan. 7 2006, 01:13 ET, Last post: Jan. 8 2006, 15:41 ET)
Get what you pay for
3 phase power  (Started: Dec. 29 2005, 20:05 ET, Last post: Jan. 8 2006, 11:10 ET)
3 phase to single phase
Edm plans  (Started: Oct. 3 2005, 21:05 ET, Last post: Jan. 7 2006, 11:41 ET)
Simple setup
Mill/late combo  (Started: Jan. 6 2006, 15:29 ET, Last post: Jan. 7 2006, 00:12 ET)
New subscriber question
Newbee 37mm launcher modifacations  (Started: Jan. 1 2006, 10:42 ET, Last post: Jan. 5 2006, 10:03 ET)
37mm project help
Grizzly 3616- any good?  need smaller mill  (Started: Dec. 30 2005, 22:25 ET, Last post: Jan. 1 2006, 00:56 ET)
Cutting the slide rails on a 1911 with a dremel  (Started: Dec. 31 2005, 16:10 ET, Last post: Dec. 31 2005, 16:10 ET)
Practicing with my dro and mill head angles  (Started: Dec. 26 2005, 19:48 ET, Last post: Dec. 31 2005, 15:44 ET)
Non gun wall hanger
Threading madness  (Started: Dec. 18 2005, 16:35 ET, Last post: Dec. 29 2005, 20:37 ET)
Interrupted cut hints  (Started: Dec. 5 2005, 13:58 ET, Last post: Dec. 29 2005, 15:19 ET)
Boring out a savage action
Time to tool up  (Started: Dec. 28 2005, 02:02 ET, Last post: Dec. 29 2005, 09:19 ET)
Quick change tool holder
New lathe  (Started: Dec. 28 2005, 00:21 ET, Last post: Dec. 29 2005, 00:47 ET)
Smithy or grizzly
I got my lathe for christmas!  (Started: Dec. 18 2005, 00:46 ET, Last post: Dec. 28 2005, 21:39 ET)
Need some help  (Started: Dec. 27 2005, 00:14 ET, Last post: Dec. 27 2005, 00:46 ET)
Tool post mount
Indicating a barrel for 4 jaw chuck  (Started: Dec. 24 2005, 21:09 ET, Last post: Dec. 25 2005, 02:54 ET)
Follow rest -- for what purpose  (Started: Dec. 20 2005, 22:06 ET, Last post: Dec. 22 2005, 18:10 ET)
Getting a mill  (Started: Dec. 16 2005, 21:15 ET, Last post: Dec. 20 2005, 22:04 ET)
Wiring your workshop  (Started: Dec. 16 2005, 21:31 ET, Last post: Dec. 18 2005, 16:33 ET)
Lathe mandrel  (Started: Dec. 18 2005, 14:22 ET, Last post: Dec. 18 2005, 14:41 ET)
Questions
Grizzly g1005z mill/drill ??  (Started: Dec. 17 2005, 17:11 ET, Last post: Dec. 17 2005, 20:45 ET)
Small milling table  (Started: Dec. 16 2005, 17:16 ET, Last post: Dec. 17 2005, 16:15 ET)
Just scored a free treadmill, for the motor  (Started: Dec. 14 2005, 20:03 ET, Last post: Dec. 15 2005, 20:30 ET)
Anyone conver thier lathe to dc?
Lathe transposing gears??  (Started: Dec. 1 2005, 18:29 ET, Last post: Dec. 14 2005, 10:59 ET)
Imperial xj9510  (Started: Dec. 12 2005, 18:53 ET, Last post: Dec. 12 2005, 18:53 ET)
Has anyone seen this mill before?
Dro for grizzly g3103 mill  (Started: Nov. 26 2005, 12:16 ET, Last post: Dec. 11 2005, 23:58 ET)
3 axis
Power feed  (Started: Dec. 11 2005, 11:36 ET, Last post: Dec. 11 2005, 22:03 ET)
Homemade
Gearing up  (Started: Dec. 8 2005, 22:21 ET, Last post: Dec. 10 2005, 23:10 ET)
So to speak
Rockwell screw lathe  (Started: Dec. 10 2005, 21:19 ET, Last post: Dec. 10 2005, 21:19 ET)
Cad plasama tables  (Started: Dec. 9 2005, 06:20 ET, Last post: Dec. 9 2005, 17:22 ET)
Your opinions please
Steady rest  (Started: Nov. 9 2005, 22:11 ET, Last post: Dec. 8 2005, 11:41 ET)
G9249 12" x 37" belt drive gap bed lathe  (Started: Sep. 17 2005, 01:16 ET, Last post: Dec. 8 2005, 11:27 ET)
Questions about available mills  (Started: Nov. 27 2005, 23:14 ET, Last post: Dec. 8 2005, 11:08 ET)
Mill heads  (Started: Dec. 6 2005, 23:36 ET, Last post: Dec. 8 2005, 02:08 ET)
Grizzly g3103 milling machine  (Started: Dec. 4 2005, 11:35 ET, Last post: Dec. 4 2005, 15:27 ET)
Spindle bearing lube
Acme verus sae thread  (Started: Dec. 4 2005, 00:33 ET, Last post: Dec. 4 2005, 00:53 ET)
Hoisting grizzly g3103  (Started: Nov. 30 2005, 22:05 ET, Last post: Dec. 2 2005, 07:14 ET)
Proper hoisting of this mill
Lathe headstock  (Started: Nov. 23 2005, 13:07 ET, Last post: Nov. 30 2005, 11:21 ET)
Milling machine  (Started: Nov. 27 2005, 18:59 ET, Last post: Nov. 29 2005, 06:18 ET)
Milling lubrication  (Started: Nov. 21 2005, 07:56 ET, Last post: Nov. 28 2005, 22:20 ET)
New tool  (Started: Jun. 17 2005, 19:55 ET, Last post: Nov. 27 2005, 23:21 ET)
Just showing off
Shop fox m1009  (Started: Nov. 26 2005, 03:50 ET, Last post: Nov. 27 2005, 04:25 ET)
Worth getting?
Fixing runout on a jacobs keyless chuck?  (Started: Nov. 26 2005, 15:02 ET, Last post: Nov. 26 2005, 15:16 ET)
Entry level mill  (Started: Oct. 28 2005, 08:47 ET, Last post: Nov. 26 2005, 11:39 ET)
Is this a good price?
Machining video clips  (Started: Nov. 26 2005, 09:55 ET, Last post: Nov. 26 2005, 11:34 ET)
Bridgeport in the garage  (Started: Nov. 19 2005, 16:36 ET, Last post: Nov. 22 2005, 00:21 ET)
Watch the chips fly now!
Shop made tooling  (Started: Nov. 19 2005, 19:06 ET, Last post: Nov. 20 2005, 01:41 ET)
Link
Sheet metal cutting tools  (Started: Nov. 15 2005, 23:22 ET, Last post: Nov. 16 2005, 22:26 ET)
What do i need to make my own flats?
What mill and lathe?  (Started: Oct. 11 2005, 19:48 ET, Last post: Nov. 15 2005, 23:30 ET)
No... not a 3-in-1...
Your machinery -- good or bad?  (Started: Oct. 18 2005, 06:46 ET, Last post: Nov. 12 2005, 14:54 ET)
Sound off!
Harbor freights lovely price matching guarentee...  (Started: Nov. 9 2005, 16:52 ET, Last post: Nov. 10 2005, 11:46 ET)
Mini mills  (Started: Nov. 4 2005, 20:31 ET, Last post: Nov. 7 2005, 01:54 ET)
Gases for hardening metal  (Started: Nov. 6 2005, 23:06 ET, Last post: Nov. 6 2005, 23:16 ET)
How big a lathe?  (Started: Oct. 12 2005, 01:07 ET, Last post: Nov. 6 2005, 17:59 ET)
Chicago electric  (Started: Oct. 25 2005, 12:25 ET, Last post: Nov. 4 2005, 15:48 ET)
Metric threads  (Started: Nov. 1 2005, 19:58 ET, Last post: Nov. 2 2005, 19:07 ET)
Good source for cutters, etc.  (Started: Oct. 9 2005, 18:39 ET, Last post: Oct. 28 2005, 02:08 ET)
Where should i get these?
H/f spot welder ????'s  (Started: Oct. 12 2005, 09:56 ET, Last post: Oct. 13 2005, 01:52 ET)
Where to start  (Started: Oct. 2 2005, 04:08 ET, Last post: Oct. 10 2005, 17:38 ET)
Newbie, absolute newbie
Hmm… funny how things work out  (Started: Oct. 8 2005, 15:50 ET, Last post: Oct. 8 2005, 16:59 ET)
California - great deal !!  (Started: Sep. 30 2005, 20:42 ET, Last post: Oct. 8 2005, 16:43 ET)
Lathe for sale
Runout  (Started: Oct. 3 2005, 02:20 ET, Last post: Oct. 5 2005, 17:39 ET)
What is acceptable?
Arbor stuck  (Started: Sep. 30 2005, 10:33 ET, Last post: Oct. 4 2005, 07:44 ET)
Welding a blind area with a mirror  (Started: Oct. 1 2005, 14:42 ET, Last post: Oct. 4 2005, 02:17 ET)
Don't laugh, it worked
Mill options  (Started: Aug. 30 2005, 20:29 ET, Last post: Sep. 24 2005, 20:30 ET)
Which to get?
Used machines  (Started: Sep. 20 2005, 21:53 ET, Last post: Sep. 21 2005, 01:55 ET)
Big stuff on the cheap
Grizzly millhttp://www.grizzly.com/products/item.c  (Started: Sep. 13 2005, 14:38 ET, Last post: Sep. 19 2005, 04:19 ET)
Should i replace my mill?
H.f handheld bandsaw stand  (Started: Sep. 19 2005, 00:59 ET, Last post: Sep. 19 2005, 00:59 ET)
Harber freight mini lathe/mill  (Started: Sep. 14 2005, 10:50 ET, Last post: Sep. 16 2005, 10:23 ET)
Good buy? junk?
Ar15 reaming the buffer tube  (Started: Sep. 2 2005, 00:54 ET, Last post: Sep. 16 2005, 07:10 ET)
Whats the best way?
Harbor freight mill  (Started: Sep. 12 2005, 23:36 ET, Last post: Sep. 13 2005, 22:52 ET)
Blasting cabinet  (Started: Aug. 29 2005, 04:08 ET, Last post: Sep. 12 2005, 21:46 ET)
Is this one alright?
Help... tiag mill not working  (Started: Sep. 7 2005, 02:24 ET, Last post: Sep. 12 2005, 19:56 ET)
Screw nut mod  (Started: Sep. 3 2005, 07:44 ET, Last post: Sep. 8 2005, 18:08 ET)
Best metal  (Started: Sep. 6 2005, 01:07 ET, Last post: Sep. 7 2005, 14:37 ET)
What would be the best metal to practice
Wood carving on a mill  (Started: Jul. 12 2005, 19:05 ET, Last post: Sep. 7 2005, 02:12 ET)
Metal spinning lathe  (Started: Sep. 4 2005, 16:01 ET, Last post: Sep. 4 2005, 16:01 ET)
Plans online
CNC mill capacity ?  (Started: Mar. 16 2004, 11:13 ET, Last post: Sep. 3 2005, 07:40 ET)
dumb (but really dumb) question
Old drawings (popular machanics?)  (Started: Aug. 31 2005, 18:11 ET, Last post: Sep. 1 2005, 10:12 ET)
Problem with chamber reamer  (Started: Aug. 31 2005, 11:50 ET, Last post: Aug. 31 2005, 20:21 ET)
Cleaning up an old index head  (Started: Jul. 10 2005, 19:07 ET, Last post: Aug. 27 2005, 20:34 ET)
Barrel chambering  (Started: Aug. 23 2005, 17:45 ET, Last post: Aug. 26 2005, 12:14 ET)
How expensive is one and a half thou.?  (Started: Aug. 13 2005, 13:33 ET, Last post: Aug. 26 2005, 11:55 ET)
Building a spider  (Started: Aug. 21 2005, 13:07 ET, Last post: Aug. 25 2005, 19:17 ET)
Discount machine shop on ebay  (Started: Aug. 25 2005, 02:09 ET, Last post: Aug. 25 2005, 15:44 ET)
Help-new mini-mill  (Started: Aug. 21 2005, 16:42 ET, Last post: Aug. 25 2005, 07:44 ET)
Reaming question  (Started: Aug. 19 2005, 12:09 ET, Last post: Aug. 22 2005, 04:06 ET)
Working with stainless steel  (Started: Aug. 18 2005, 16:47 ET, Last post: Aug. 21 2005, 23:14 ET)
Cast iron and end mills  (Started: Aug. 15 2005, 11:42 ET, Last post: Aug. 19 2005, 11:49 ET)
Where do i start?  (Started: Aug. 9 2005, 09:51 ET, Last post: Aug. 18 2005, 18:06 ET)
Finally!  (Started: May 7 2005, 20:48 ET, Last post: Aug. 18 2005, 00:18 ET)
Lathe emerged from crate.
Lathe  (Started: Aug. 15 2005, 11:18 ET, Last post: Aug. 17 2005, 22:46 ET)
What size
Headspace gauges  (Started: Jul. 13 2005, 16:26 ET, Last post: Aug. 15 2005, 00:47 ET)
Adding 5c collet capability to grizzly g9036 lathe  (Started: Aug. 8 2005, 02:40 ET, Last post: Aug. 14 2005, 01:55 ET)
What is this?  (Started: Aug. 10 2005, 17:47 ET, Last post: Aug. 12 2005, 18:29 ET)
And why would i want one?
Mill backlash controle  (Started: Aug. 10 2005, 08:00 ET, Last post: Aug. 12 2005, 01:43 ET)
Harbor freigth lathe  (Started: Aug. 10 2005, 12:37 ET, Last post: Aug. 12 2005, 00:41 ET)
Need help deciding on new lathe  (Started: Aug. 10 2005, 19:09 ET, Last post: Aug. 11 2005, 23:43 ET)
Choosing a mill/drill  (Started: Aug. 8 2005, 18:02 ET, Last post: Aug. 10 2005, 05:44 ET)
Grizzly g1005z vs wholesaletool 3006
New vice  (Started: Aug. 2 2005, 21:48 ET, Last post: Aug. 5 2005, 23:56 ET)
Anyone used a milling attachment on their lathe?  (Started: Jul. 26 2005, 13:26 ET, Last post: Aug. 4 2005, 14:53 ET)
That elusive smooth finish  (Started: Jul. 1 2005, 23:39 ET, Last post: Aug. 3 2005, 06:56 ET)
Broaching machines  (Started: Aug. 2 2005, 02:24 ET, Last post: Aug. 2 2005, 16:54 ET)
Small shop broaching
My mill is too small  (Started: Jul. 28 2005, 08:47 ET, Last post: Aug. 1 2005, 06:06 ET)
How can i get this done?
Lathe carriage stop  (Started: Jul. 15 2005, 05:34 ET, Last post: Jul. 27 2005, 21:50 ET)
Guaranteed to stop it!
Mill-drill combo overview  (Started: Jun. 8 2005, 12:55 ET, Last post: Jul. 27 2005, 10:20 ET)
Knurling  (Started: Jul. 24 2005, 09:50 ET, Last post: Jul. 25 2005, 23:21 ET)
Free float tube
Help a newbie w/ a lath setup.  (Started: Jul. 20 2005, 18:58 ET, Last post: Jul. 25 2005, 08:33 ET)
Help with my compressor  (Started: Jul. 12 2005, 01:08 ET, Last post: Jul. 23 2005, 00:15 ET)
Do i need a new one?
How do you cut a semi-circle on a lathe  (Started: Jul. 20 2005, 18:27 ET, Last post: Jul. 21 2005, 16:54 ET)
Double-barrelled rocker toolpost  (Started: Jul. 15 2005, 06:09 ET, Last post: Jul. 20 2005, 04:21 ET)
To hell with shims!
Need help rebarreling my savage model 10  (Started: Jul. 9 2005, 18:21 ET, Last post: Jul. 18 2005, 00:24 ET)
Lathe workpiece stoppers  (Started: Apr. 8 2005, 05:40 ET, Last post: Jul. 15 2005, 05:28 ET)
Highly adjustable
Traming plate  (Started: Jun. 3 2005, 01:34 ET, Last post: Jul. 12 2005, 00:15 ET)
What mill accy's do i need, 0% 1911 frame  (Started: Jul. 1 2005, 18:44 ET, Last post: Jul. 2 2005, 17:56 ET)
Can dro's be added to a grizzly mini-mill?  (Started: Jul. 1 2005, 09:42 ET, Last post: Jul. 2 2005, 11:18 ET)
How to use a rotary table  (Started: Jun. 19 2005, 11:27 ET, Last post: Jun. 28 2005, 18:07 ET)
Pdf from another machinist
3 jaw chuck problems  (Started: May 25 2005, 21:27 ET, Last post: Jun. 26 2005, 12:30 ET)
More powerful motor for 7 x 14 lathe  (Started: Jun. 8 2005, 14:41 ET, Last post: Jun. 25 2005, 16:10 ET)
Books to further my knowledge of milling?  (Started: Jun. 24 2005, 17:37 ET, Last post: Jun. 24 2005, 17:37 ET)
Minimill power feed  (Started: Jun. 22 2005, 04:35 ET, Last post: Jun. 23 2005, 02:30 ET)
Stripped my pinion gear  (Started: Jun. 13 2005, 12:18 ET, Last post: Jun. 15 2005, 06:57 ET)
Tool post grinder  (Started: Jun. 5 2005, 12:08 ET, Last post: Jun. 9 2005, 18:03 ET)
Build you'r own ??
Jet mill  (Started: Jun. 9 2005, 15:00 ET, Last post: Jun. 9 2005, 15:00 ET)
Panic in lathe city  (Started: Jun. 4 2005, 13:50 ET, Last post: Jun. 9 2005, 07:35 ET)
Water jet or abrassive jet machining  (Started: Jun. 2 2005, 20:42 ET, Last post: Jun. 8 2005, 18:55 ET)
Just some info
Cutting special motion transfer thread help  (Started: Jun. 8 2005, 14:06 ET, Last post: Jun. 8 2005, 14:06 ET)
3 in 1 metalworking multipurpose machine  (Started: May 24 2005, 18:16 ET, Last post: Jun. 3 2005, 08:29 ET)
Mill drill lathe
Oxy-acetylene torch kit  (Started: May 28 2005, 08:55 ET, Last post: Jun. 1 2005, 22:36 ET)
Remington bolt diameter  (Started: May 30 2005, 00:37 ET, Last post: May 31 2005, 11:17 ET)
Remington bolt diameter
??tuning up a well  (Started: May 19 2005, 13:27 ET, Last post: May 31 2005, 10:10 ET)
Used 7x minilathe
Cross slides  (Started: May 30 2005, 14:47 ET, Last post: May 30 2005, 16:08 ET)
Drill sharpener  (Started: May 27 2005, 14:14 ET, Last post: May 30 2005, 12:22 ET)
Got my new lathe  (Started: May 28 2005, 11:29 ET, Last post: May 30 2005, 09:38 ET)
Spindle bearing adjustment  (Started: May 21 2005, 13:39 ET, Last post: May 30 2005, 02:32 ET)
Now it gets warm
Z axis , my solution on a 7x12  (Started: May 22 2005, 14:01 ET, Last post: May 23 2005, 02:36 ET)
Modification for an indicator ,z  axis
Finally got a z axis dro  (Started: May 18 2005, 23:18 ET, Last post: May 23 2005, 00:21 ET)
Cheap hf caliper to the rescue
Extending drill press  (Started: May 20 2005, 12:11 ET, Last post: May 21 2005, 00:50 ET)
How to make a longer column?
Harbor freight sale  (Started: May 18 2005, 11:35 ET, Last post: May 20 2005, 16:17 ET)
Lathe question
Dro for z axis  (Started: May 19 2005, 15:47 ET, Last post: May 19 2005, 18:53 ET)
Cutting
Grizzly 4003  (Started: May 18 2005, 20:31 ET, Last post: May 19 2005, 16:03 ET)
2d cad  (Started: Feb. 6 2005, 22:41 ET, Last post: May 19 2005, 10:09 ET)
What do you recomend
Portable machine shop co-op  (Started: Mar. 21 2005, 19:29 ET, Last post: May 19 2005, 09:58 ET)
Came up with this idea the other day
Thread depth  (Started: May 17 2005, 08:41 ET, Last post: May 17 2005, 15:06 ET)
Welder opinion  (Started: May 7 2005, 18:40 ET, Last post: May 16 2005, 12:24 ET)
Lincoln square wave 175 tig
Which welding helmet should i buy?  (Started: May 2 2005, 20:25 ET, Last post: May 14 2005, 17:20 ET)
Low amp tig
Follower rest  (Started: Apr. 20 2005, 03:07 ET, Last post: May 12 2005, 10:11 ET)
For tappered barrel
Rutland 2649-1190 lathe  (Started: May 8 2005, 08:14 ET, Last post: May 10 2005, 19:25 ET)
Tips  (Started: May 8 2005, 22:19 ET, Last post: May 8 2005, 22:19 ET)
From rondexter.com
Maching books  (Started: May 6 2005, 10:28 ET, Last post: May 6 2005, 10:28 ET)
Book source
Bad pot?  (Started: Apr. 27 2005, 16:23 ET, Last post: May 4 2005, 12:21 ET)
Made my own tap  (Started: Apr. 1 2005, 17:22 ET, Last post: May 2 2005, 00:32 ET)
Contimuatio of  "tap costs what?"
Depth mic  (Started: Apr. 16 2005, 17:49 ET, Last post: May 2 2005, 00:21 ET)
Calibration
Rethreading barrel  (Started: Apr. 27 2005, 23:07 ET, Last post: Apr. 29 2005, 15:17 ET)
Micrometer type  (Started: Apr. 2 2005, 22:50 ET, Last post: Apr. 28 2005, 10:21 ET)
Friction thimble or ratchet stop
Doctor, heal thyself!  (Started: Apr. 7 2005, 06:37 ET, Last post: Apr. 27 2005, 10:13 ET)
Improvised machinery repair
Axle shaft welding?  (Started: Apr. 7 2005, 00:07 ET, Last post: Apr. 25 2005, 09:18 ET)
Heads-up all you socal smith's . . . .  (Started: Apr. 19 2005, 01:41 ET, Last post: Apr. 22 2005, 00:29 ET)
Nice "little" surface grinder . . . .
Smallest tig, mig welder  (Started: Apr. 4 2005, 22:23 ET, Last post: Apr. 20 2005, 22:51 ET)
Worlds smallest welder...question?  (Started: Apr. 12 2005, 23:34 ET, Last post: Apr. 20 2005, 22:43 ET)
Edge-finder embarassment  (Started: Sep. 7 2004, 11:34 ET, Last post: Apr. 14 2005, 02:31 ET)
Time to set up shop  (Started: Apr. 11 2005, 21:19 ET, Last post: Apr. 13 2005, 03:52 ET)
Help me spend some money
Drill chuck come apart?  (Started: Apr. 8 2005, 16:42 ET, Last post: Apr. 11 2005, 09:04 ET)
Torque wrenches  (Started: Apr. 8 2005, 17:47 ET, Last post: Apr. 11 2005, 00:35 ET)
Molly dee--where to buy ?  (Started: Apr. 4 2005, 21:34 ET, Last post: Apr. 7 2005, 01:28 ET)
Buying cutting oil
Milling cast iron help needed  (Started: Apr. 4 2005, 12:38 ET, Last post: Apr. 5 2005, 22:25 ET)
This is not related to firearms.....
Mounting dro's on mill  (Started: Apr. 4 2005, 21:41 ET, Last post: Apr. 5 2005, 18:31 ET)
Grizzly 3102
- dro -report on grizzly dro installation on mill  (Started: Mar. 27 2005, 20:37 ET, Last post: Apr. 5 2005, 07:22 ET)
Installation report
Anyone with a jet 13x40 lathe  (Started: Mar. 22 2005, 00:11 ET, Last post: Apr. 3 2005, 19:37 ET)
Need book
power feeds for a mini-mill  (Started: Oct. 28 2002, 11:39 ET, Last post: Apr. 3 2005, 19:29 ET)
talk about over kill....
Photos of my workshop  (Started: Aug. 25 2002, 14:49 ET, Last post: Apr. 3 2005, 14:43 ET)
Not a virtual tour, but close
Hardness testing  (Started: Apr. 2 2005, 22:56 ET, Last post: Apr. 3 2005, 13:32 ET)
Stock duplicator  (Started: Apr. 1 2005, 18:07 ET, Last post: Apr. 3 2005, 12:42 ET)
The LIFEof an Endmill  (Started: Mar. 1 2003, 08:14 ET, Last post: Apr. 2 2005, 18:18 ET)
Which welders can be converted for tig use?  (Started: Mar. 8 2005, 18:32 ET, Last post: Apr. 2 2005, 12:24 ET)
Aligning work with a steady rest  (Started: Mar. 31 2005, 08:36 ET, Last post: Apr. 1 2005, 13:37 ET)
Using pre-hardened stock  (Started: Mar. 29 2005, 22:46 ET, Last post: Apr. 1 2005, 02:15 ET)
4140 @ 30rc
How do i drill out a 7/8 x 2" bolt ?  (Started: Mar. 31 2005, 01:55 ET, Last post: Mar. 31 2005, 16:43 ET)
Bend allowance  (Started: Mar. 30 2005, 13:34 ET, Last post: Mar. 30 2005, 22:57 ET)
Sheet metal
Ordered up a grizzly g3102  (Started: Mar. 24 2005, 17:22 ET, Last post: Mar. 30 2005, 21:27 ET)
Any gotchas for new machine setup?
Will it fit  (Started: Feb. 25 2005, 18:23 ET, Last post: Mar. 29 2005, 18:54 ET)
Kurt vise
New mill  (Started: Sep. 4 2004, 00:15 ET, Last post: Mar. 29 2005, 18:12 ET)
Starting out questions
Fly cutters ? ? ? ?  (Started: Mar. 10 2005, 15:33 ET, Last post: Mar. 29 2005, 17:02 ET)
Speeds and feeds ? ? ? ?
Threading in a lathe . . .  (Started: Mar. 22 2005, 20:54 ET, Last post: Mar. 28 2005, 02:07 ET)
Kurt vice  (Started: Mar. 26 2005, 18:55 ET, Last post: Mar. 28 2005, 01:54 ET)
The tap costs what???  (Started: Mar. 18 2005, 19:44 ET, Last post: Mar. 27 2005, 14:27 ET)
Optical center punch  (Started: Mar. 26 2005, 03:00 ET, Last post: Mar. 26 2005, 09:35 ET)
Very informative site for machinging newbs  (Started: Mar. 20 2005, 09:50 ET, Last post: Mar. 25 2005, 03:31 ET)
Info is power....and it saves on tools
Microlux mill  (Started: Mar. 22 2005, 15:59 ET, Last post: Mar. 24 2005, 12:46 ET)
Something is crooked!  (Started: Mar. 22 2005, 00:54 ET, Last post: Mar. 24 2005, 01:06 ET)
Now what?
Just cut my first chips :)  (Started: Mar. 11 2005, 19:00 ET, Last post: Mar. 24 2005, 00:31 ET)
It does work! (mill in a dp w/crosslide)
Tailstock alignment  (Started: Feb. 13 2005, 17:44 ET, Last post: Mar. 23 2005, 22:53 ET)
Advice on milling machine  (Started: Mar. 17 2005, 02:51 ET, Last post: Mar. 23 2005, 17:48 ET)
Molded grips  (Started: Mar. 22 2005, 18:49 ET, Last post: Mar. 22 2005, 21:39 ET)
Milling an octogon barrel question  (Started: Mar. 16 2005, 23:20 ET, Last post: Mar. 18 2005, 21:59 ET)
Cheap dro  (Started: Mar. 1 2005, 00:53 ET, Last post: Mar. 18 2005, 01:44 ET)
Where to get?
Where can i find a cheap milling machine  (Started: Jan. 16 2005, 11:25 ET, Last post: Mar. 15 2005, 18:34 ET)
"e" drill is .250..so is 1/4"..why 2 drills?  (Started: Mar. 12 2005, 19:04 ET, Last post: Mar. 12 2005, 20:29 ET)
Any way to make a barrel without a lathe???  (Started: Mar. 10 2005, 15:37 ET, Last post: Mar. 12 2005, 00:29 ET)
Umm im desperate
Drill chuck confusion  (Started: Mar. 8 2005, 14:15 ET, Last post: Mar. 10 2005, 14:20 ET)
Jt33, mt3?
Measuring tools  (Started: Mar. 9 2005, 15:10 ET, Last post: Mar. 9 2005, 17:05 ET)
How to drill flat bottom hole w/dp??  (Started: Mar. 4 2005, 22:55 ET, Last post: Mar. 6 2005, 18:21 ET)
Small mill for plunge cut/drill only??
Cheap drill source  (Started: Mar. 4 2005, 20:46 ET, Last post: Mar. 4 2005, 20:46 ET)
Hf wasp belt sader for dp...anygood?  (Started: Mar. 3 2005, 20:54 ET, Last post: Mar. 4 2005, 13:36 ET)
Compact and cheap....
Remember safety first....  (Started: Mar. 2 2005, 23:38 ET, Last post: Mar. 3 2005, 23:00 ET)
Your $$$...lathe or mill (hf)  (Started: Jan. 28 2005, 17:01 ET, Last post: Mar. 3 2005, 16:16 ET)
Looking for atlas gear covers  (Started: Jan. 31 2005, 10:57 ET, Last post: Mar. 2 2005, 18:34 ET)
Foredom tool  (Started: Feb. 24 2005, 00:39 ET, Last post: Mar. 1 2005, 20:34 ET)
Which one?
Metric machining book?  (Started: Feb. 22 2005, 07:40 ET, Last post: Feb. 24 2005, 06:38 ET)
What tool to use for curved "t-slot"?  (Started: Feb. 22 2005, 13:36 ET, Last post: Feb. 23 2005, 12:25 ET)
Collets  (Started: Feb. 3 2005, 15:27 ET, Last post: Feb. 19 2005, 22:16 ET)
And machineability
AGI Machine Shop Courses  (Started: May 28 2003, 15:49 ET, Last post: Feb. 16 2005, 21:04 ET)
Wanted to buy,rent, trade
Where in god's name can i find some steel?l?  (Started: Jan. 18 2005, 06:57 ET, Last post: Feb. 12 2005, 20:30 ET)
First of many...  (Started: Feb. 4 2005, 20:29 ET, Last post: Feb. 12 2005, 20:18 ET)
Home-made machines (expedient type)  (Started: Jan. 22 2005, 20:49 ET, Last post: Feb. 7 2005, 16:44 ET)
Mini mill control box plate  (Started: Feb. 7 2005, 16:13 ET, Last post: Feb. 7 2005, 16:13 ET)
Need a pic of the plate
Can this be done?  (Started: Feb. 4 2005, 02:53 ET, Last post: Feb. 4 2005, 12:05 ET)
Lubricant  (Started: Feb. 2 2005, 17:25 ET, Last post: Feb. 3 2005, 12:33 ET)
Rotary table
Taig milling access. on hf 7x10?  (Started: Jan. 30 2005, 18:57 ET, Last post: Feb. 2 2005, 22:18 ET)
Tig welder  (Started: Jan. 27 2005, 19:16 ET, Last post: Feb. 2 2005, 22:12 ET)
Hf mini mill reliability  (Started: Jan. 27 2005, 13:19 ET, Last post: Feb. 1 2005, 11:33 ET)
Extended service protection for the mini
Help with 12 ga metal bending  (Started: Jan. 31 2005, 15:53 ET, Last post: Jan. 31 2005, 21:29 ET)
Stupid ?.... wood lathe conversions?  (Started: Jan. 30 2005, 19:48 ET, Last post: Jan. 31 2005, 11:52 ET)
Can you hep' a brother out?  (Started: Jan. 14 2005, 08:09 ET, Last post: Jan. 29 2005, 14:53 ET)
Bridgeport questons  (Started: Jan. 21 2005, 16:17 ET, Last post: Jan. 28 2005, 18:46 ET)
Try #2... dp as mill, rotary table (?)s  (Started: Jan. 26 2005, 16:22 ET, Last post: Jan. 28 2005, 18:09 ET)
Vfd bridgeport 3 phase  (Started: Jan. 11 2005, 19:14 ET, Last post: Jan. 28 2005, 16:44 ET)
Is this a good idea?
Machine Tooling Store  (Started: Feb. 16 2004, 13:39 ET, Last post: Jan. 28 2005, 15:03 ET)
where I can touch stuff
Wtb: used hf mini socal/nv area  (Started: Jan. 26 2005, 18:48 ET, Last post: Jan. 27 2005, 13:26 ET)
Atlas mod ???'s  (Started: Jan. 5 2005, 23:56 ET, Last post: Jan. 25 2005, 15:42 ET)
Hf mini mill modifications  (Started: Dec. 22 2004, 16:23 ET, Last post: Jan. 25 2005, 14:17 ET)
Becoming a better metalworker...  (Started: Jan. 21 2005, 23:27 ET, Last post: Jan. 25 2005, 14:16 ET)
Despite my learning environment.
Emachineshop.com anyone use i have  (Started: Jan. 22 2005, 03:53 ET, Last post: Jan. 23 2005, 06:25 ET)
Emachineshop.com anyone use i have
1959 craftsman vari-speed w/rotary table..help  (Started: Jan. 22 2005, 20:19 ET, Last post: Jan. 22 2005, 20:19 ET)
Turn wood on metal lathe  (Started: May 12 2002, 22:47 ET, Last post: Jan. 22 2005, 06:46 ET)
Can you do it?
Vfd drives  (Started: Jan. 19 2005, 11:12 ET, Last post: Jan. 20 2005, 22:01 ET)
Knee mill substitute  (Started: Jan. 15 2005, 12:19 ET, Last post: Jan. 19 2005, 09:50 ET)
3-1  machines  (Started: Jan. 18 2005, 13:43 ET, Last post: Jan. 18 2005, 13:43 ET)
Welder help needed!  (Started: Jan. 17 2005, 15:21 ET, Last post: Jan. 17 2005, 22:15 ET)
Jumped in with two left feet!  (Started: Jan. 4 2005, 11:51 ET, Last post: Jan. 17 2005, 20:45 ET)
What is the best vise to start with?  (Started: Jan. 14 2005, 18:19 ET, Last post: Jan. 17 2005, 18:15 ET)
I can now buy a vise
Sandblasting at home  (Started: Dec. 12 2004, 20:18 ET, Last post: Jan. 17 2005, 15:28 ET)
Roller bearings  (Started: Jan. 17 2005, 00:55 ET, Last post: Jan. 17 2005, 04:46 ET)
Size chart
7075 aluminium  (Started: Jan. 6 2005, 23:16 ET, Last post: Jan. 15 2005, 10:07 ET)
On ebay
Lathe for rifle work  (Started: Jan. 8 2005, 23:57 ET, Last post: Jan. 14 2005, 09:00 ET)
Recommendations on a lathe/specs.
Tap question.  (Started: Jan. 3 2005, 00:05 ET, Last post: Jan. 13 2005, 22:32 ET)
Tap question.
Air compressors  (Started: Dec. 31 2004, 22:11 ET, Last post: Jan. 13 2005, 12:30 ET)
Quality of various makes
Slotter  (Started: Dec. 30 2004, 09:32 ET, Last post: Jan. 12 2005, 01:15 ET)
Vertical shaper
Rewelded rcvr help, any welders out there  (Started: Jan. 1 2005, 07:24 ET, Last post: Jan. 11 2005, 23:27 ET)
Smithing
How to make a perfect 1/2"diam 16" deep bore?  (Started: Jan. 4 2005, 06:19 ET, Last post: Jan. 7 2005, 13:35 ET)
A barrel for a paintball gun
Rifling machine  (Started: Jan. 2 2005, 04:14 ET, Last post: Jan. 5 2005, 21:34 ET)
How to build
Childs milling machine  (Started: Jan. 4 2005, 16:05 ET, Last post: Jan. 4 2005, 16:05 ET)
What have i got
Should i buy a south bend heavy 10?  (Started: Dec. 28 2004, 11:11 ET, Last post: Jan. 1 2005, 14:36 ET)
Is this a good deal?
Belated christmas present to self  (Started: Jan. 1 2005, 00:42 ET, Last post: Jan. 1 2005, 00:42 ET)
New (old) toy
Which one should i buy  (Started: Dec. 22 2004, 20:23 ET, Last post: Dec. 31 2004, 23:56 ET)
Books/Instruction for Complete Metalworking Newbie  (Started: Oct. 14 2004, 15:24 ET, Last post: Dec. 30 2004, 15:11 ET)
Dro time  (Started: Dec. 30 2004, 01:50 ET, Last post: Dec. 30 2004, 02:56 ET)
Has anyone used this company
Making reloading dies  (Started: Dec. 22 2004, 06:11 ET, Last post: Dec. 27 2004, 20:46 ET)
Any suggestions?
R-8 quick change tool system for sale  (Started: Dec. 22 2004, 07:47 ET, Last post: Dec. 22 2004, 07:47 ET)
For sale
Big ball end mill  (Started: Dec. 11 2004, 14:26 ET, Last post: Dec. 22 2004, 07:29 ET)
Runout  (Started: Dec. 9 2004, 01:27 ET, Last post: Dec. 21 2004, 13:14 ET)
If you have a lathe or mill  (Started: Dec. 20 2004, 22:11 ET, Last post: Dec. 20 2004, 22:11 ET)
You may be interested in this.
How about some show and tell?  (Started: Nov. 9 2004, 20:49 ET, Last post: Dec. 20 2004, 17:19 ET)
What machines do you have?
Grinding compound questions  (Started: Dec. 14 2004, 08:09 ET, Last post: Dec. 16 2004, 04:59 ET)
Just some basic questions...
Wire gauge tap & drill question  (Started: Dec. 14 2004, 08:45 ET, Last post: Dec. 16 2004, 04:16 ET)
This has been bugging me...
Grizzly/Central Machinery  (Started: Oct. 29 2004, 22:51 ET, Last post: Dec. 9 2004, 07:10 ET)
which one
Lathe tools  (Started: Dec. 6 2004, 09:54 ET, Last post: Dec. 6 2004, 15:05 ET)
Homemade machines  (Started: Nov. 20 2004, 13:30 ET, Last post: Dec. 5 2004, 12:06 ET)
What machine?  (Started: Nov. 30 2004, 18:21 ET, Last post: Nov. 30 2004, 21:59 ET)
Ames hardness tester  (Started: Nov. 30 2004, 15:33 ET, Last post: Nov. 30 2004, 15:33 ET)
Removing welding  (Started: Nov. 22 2004, 14:09 ET, Last post: Nov. 28 2004, 23:49 ET)
Remove welded fsb off a colt ar15 barrel
aaargh! learn at my expense  (Started: Oct. 30 2004, 02:12 ET, Last post: Nov. 28 2004, 17:05 ET)
Broke the compound on my 10" atlas
Anyone need a stong motor?  (Started: Nov. 27 2004, 12:51 ET, Last post: Nov. 27 2004, 12:51 ET)
Lathe motor  (Started: Nov. 19 2004, 22:46 ET, Last post: Nov. 25 2004, 03:18 ET)
One machine first?  (Started: Nov. 8 2004, 01:42 ET, Last post: Nov. 25 2004, 03:08 ET)
Big truck with big box came today  (Started: Nov. 23 2004, 20:13 ET, Last post: Nov. 25 2004, 02:28 ET)
1000 pounds of lathe in my pickup now
Made some chips today!  (Started: Nov. 21 2004, 20:42 ET, Last post: Nov. 22 2004, 21:03 ET)
But not a project
Sherline machines  (Started: Nov. 20 2004, 19:32 ET, Last post: Nov. 22 2004, 14:01 ET)
Heat oven  (Started: Nov. 17 2004, 19:03 ET, Last post: Nov. 19 2004, 22:55 ET)
Water jet operation  (Started: Nov. 16 2004, 22:38 ET, Last post: Nov. 17 2004, 14:56 ET)
Question
What kind of coolant system do you run?  (Started: Nov. 16 2004, 08:01 ET, Last post: Nov. 17 2004, 03:45 ET)
Need one for my mill, lathe too
Cbx shooting star  (Started: Nov. 11 2004, 17:59 ET, Last post: Nov. 14 2004, 09:02 ET)
Mounting malfunctions
Lathe grinder  (Started: Nov. 10 2004, 21:50 ET, Last post: Nov. 11 2004, 01:29 ET)
Tool storage  (Started: Oct. 26 2004, 06:31 ET, Last post: Nov. 10 2004, 01:36 ET)
$$$$$
3-phase newbie questions  (Started: Nov. 6 2004, 10:51 ET, Last post: Nov. 9 2004, 21:25 ET)
Need to convert g-m code into a saveable format  (Started: Nov. 5 2004, 21:04 ET, Last post: Nov. 9 2004, 20:02 ET)
Mini-mill mounting  (Started: Nov. 1 2004, 00:38 ET, Last post: Nov. 9 2004, 10:23 ET)
Adj lathe spindle bearings  (Started: Nov. 4 2004, 17:32 ET, Last post: Nov. 8 2004, 20:22 ET)
Enco lathe
website with plans... going out of business  (Started: Sep. 20 2004, 20:12 ET, Last post: Nov. 8 2004, 13:35 ET)
free stuff, get it while you can
Reference book on heat-treating  (Started: Nov. 7 2004, 16:07 ET, Last post: Nov. 7 2004, 21:00 ET)
Who's made there own threading tools?  (Started: Nov. 3 2004, 23:28 ET, Last post: Nov. 5 2004, 17:11 ET)
My indexable internal threading tool
Question for people with bigger machinery at home  (Started: Nov. 2 2004, 00:55 ET, Last post: Nov. 4 2004, 23:17 ET)
What do you do for 3 phase power?
Shop update  (Started: Nov. 4 2004, 13:19 ET, Last post: Nov. 4 2004, 14:07 ET)
3 & 1 tools
Broaches  (Started: Oct. 22 2004, 18:42 ET, Last post: Nov. 3 2004, 21:43 ET)
How to make broaches
What can a surface grinder do for my gunsbuilding?  (Started: Oct. 25 2004, 16:44 ET, Last post: Nov. 2 2004, 01:00 ET)
I have an oportunity to buy one.
edge finders  (Started: Oct. 29 2004, 15:34 ET, Last post: Nov. 1 2004, 21:38 ET)
Lathe  (Started: Oct. 20 2004, 15:27 ET, Last post: Nov. 1 2004, 21:29 ET)
The old Atlas has come a long way!
Holding a big Tap in a Mini Mill  (Started: Oct. 18 2004, 21:26 ET, Last post: Oct. 29 2004, 21:46 ET)
heat treating AK lower rails  (Started: Oct. 22 2004, 13:42 ET, Last post: Oct. 29 2004, 20:24 ET)
Am I doing it correctly?
new vise question  (Started: Oct. 27 2004, 21:35 ET, Last post: Oct. 28 2004, 00:54 ET)
A lot of information  (Started: Oct. 27 2004, 02:28 ET, Last post: Oct. 27 2004, 20:31 ET)
is brazing strong enough?  (Started: Oct. 18 2004, 14:14 ET, Last post: Oct. 20 2004, 23:21 ET)
break open design
Boring Bars on a Mill?  (Started: Sep. 30 2004, 15:03 ET, Last post: Oct. 15 2004, 17:19 ET)
Help with jeweling  (Started: Oct. 3 2004, 20:07 ET, Last post: Oct. 14 2004, 19:34 ET)
Jeweling brass
WTK: Sine Plate? Sine Bar?  (Started: Oct. 4 2004, 14:25 ET, Last post: Oct. 4 2004, 19:45 ET)
Flat 'test' plate for the mini-mill  (Started: Sep. 20 2004, 08:32 ET, Last post: Oct. 3 2004, 18:03 ET)
Couple of questions about heattreating  (Started: Sep. 27 2004, 21:07 ET, Last post: Sep. 29 2004, 08:50 ET)
Electric motors  (Started: Sep. 24 2004, 14:36 ET, Last post: Sep. 24 2004, 17:23 ET)
45 deg end mill  (Started: Sep. 24 2004, 02:13 ET, Last post: Sep. 24 2004, 11:31 ET)
Machine Tool Auction  (Started: Sep. 24 2004, 01:25 ET, Last post: Sep. 24 2004, 02:49 ET)
Interesting Prices
I'm looking into this  (Started: Sep. 18 2004, 22:26 ET, Last post: Sep. 23 2004, 00:28 ET)
Need to look before I jump
My first metal lathe!  (Started: Sep. 21 2004, 09:09 ET, Last post: Sep. 22 2004, 23:50 ET)
Chucking a lathe... how to use gauges to center?  (Started: Sep. 20 2004, 13:47 ET, Last post: Sep. 22 2004, 14:17 ET)
problems with new lathe  (Started: Aug. 16 2004, 09:10 ET, Last post: Sep. 21 2004, 09:33 ET)
HELP!  Need set-up advice  (Started: Sep. 17 2004, 18:59 ET, Last post: Sep. 20 2004, 08:26 ET)
chucking tapered barrel in lathe  (Started: Sep. 18 2004, 00:20 ET, Last post: Sep. 19 2004, 19:09 ET)
need advise
Plasma Cutter  (Started: Sep. 17 2004, 13:23 ET, Last post: Sep. 17 2004, 22:52 ET)
Have to spend $10K on a mill?  (Started: Sep. 8 2004, 16:27 ET, Last post: Sep. 17 2004, 17:34 ET)
or will mini mill do most jobs
Ball Turning  (Started: Sep. 10 2004, 20:25 ET, Last post: Sep. 15 2004, 20:18 ET)
for a bolt handle
Offset center  (Started: Aug. 22 2004, 21:40 ET, Last post: Sep. 11 2004, 19:46 ET)
insted of off set tail stock
Use of a Steady Rest  (Started: Sep. 2 2004, 07:54 ET, Last post: Sep. 10 2004, 17:58 ET)
Belt drive Mini-mill  (Started: Sep. 2 2004, 23:47 ET, Last post: Sep. 3 2004, 23:37 ET)
Center finder.  (Started: Aug. 12 2004, 12:44 ET, Last post: Sep. 3 2004, 12:23 ET)
TIG Welding  (Started: Aug. 12 2004, 08:35 ET, Last post: Sep. 3 2004, 11:30 ET)
Opening up the Center Bore on my Mini  (Started: Aug. 23 2004, 08:53 ET, Last post: Sep. 2 2004, 10:04 ET)
7.7 jap shoot 7.62x39  (Started: Aug. 27 2004, 21:47 ET, Last post: Sep. 1 2004, 08:56 ET)
with a chamber adapter
Anyone have a plasma cutter?  (Started: Aug. 24 2004, 07:59 ET, Last post: Sep. 1 2004, 08:50 ET)
What size compressor are you using?
Universal tig footswitch??  (Started: Aug. 25 2004, 21:04 ET, Last post: Aug. 28 2004, 01:05 ET)
rotary or vfd  (Started: Aug. 8 2004, 23:22 ET, Last post: Aug. 26 2004, 12:44 ET)
help me decide please
Machine Octagon Barrel to Half-Round  (Started: Jul. 24 2004, 18:32 ET, Last post: Aug. 25 2004, 16:45 ET)
Machine Octagon barrel to half-Round
cheap import DRO scales source  (Started: Aug. 23 2004, 07:15 ET, Last post: Aug. 24 2004, 21:27 ET)
New Lathe and Mill  (Started: Aug. 16 2004, 00:32 ET, Last post: Aug. 21 2004, 11:58 ET)
3 Jaw Chuck Problems  (Started: Aug. 15 2004, 11:14 ET, Last post: Aug. 20 2004, 18:12 ET)
Need a Scale for my Pathfinder -5 DRO  (Started: Aug. 18 2004, 18:18 ET, Last post: Aug. 20 2004, 02:17 ET)
Grizzly's "Z" series...differences?  (Started: Jul. 23 2004, 19:55 ET, Last post: Aug. 17 2004, 14:58 ET)
Whats the difference from standard?
Older Lathes and Tolerances  (Started: Aug. 8 2004, 12:54 ET, Last post: Aug. 15 2004, 12:32 ET)
How much slop is acceptable?
Blast Cabinet Screen  (Started: Aug. 10 2004, 19:43 ET, Last post: Aug. 13 2004, 16:33 ET)
Drill press precision chuck?  (Started: Jul. 8 2004, 16:51 ET, Last post: Aug. 9 2004, 17:47 ET)
What Kind?
Enco mill/drillpress for sale Atlanta  (Started: Jul. 26 2004, 21:13 ET, Last post: Aug. 8 2004, 20:07 ET)
Atlas lathe  (Started: May 22 2004, 21:08 ET, Last post: Aug. 8 2004, 19:49 ET)
Home built surface grinder?  (Started: Aug. 6 2004, 10:52 ET, Last post: Aug. 7 2004, 15:20 ET)
Anyone made one?
Taper Attachment?  (Started: Aug. 5 2004, 21:43 ET, Last post: Aug. 6 2004, 19:21 ET)
Makita, DeWalt, Milwaukee  (Started: Aug. 6 2004, 08:37 ET, Last post: Aug. 6 2004, 17:03 ET)
Differences  other than the color
Graingers  (Started: Aug. 4 2004, 18:28 ET, Last post: Aug. 6 2004, 15:03 ET)
home shop  (Started: Jul. 25 2004, 13:37 ET, Last post: Aug. 4 2004, 16:13 ET)
new to this forum . pics of my home shop
Subscribe Now before the change  (Started: Aug. 3 2004, 14:26 ET, Last post: Aug. 3 2004, 14:26 ET)
Blast Cabinet spray gun  (Started: Aug. 3 2004, 07:24 ET, Last post: Aug. 3 2004, 13:42 ET)
Broken tap removal  (Started: Jul. 21 2004, 16:01 ET, Last post: Aug. 2 2004, 19:46 ET)
Hellppppppp meeeeee!
Nother mill question  (Started: Jul. 21 2004, 07:49 ET, Last post: Jul. 28 2004, 21:21 ET)
should I get it or no?
New toy  (Started: Jun. 15 2004, 10:00 ET, Last post: Jul. 26 2004, 22:07 ET)
An atlas lathe
Nikole Mini-systems tools!  (Started: Jul. 21 2004, 01:27 ET, Last post: Jul. 25 2004, 14:54 ET)
Need help Finding them! :(
Drilling Problems  (Started: Jul. 14 2004, 21:46 ET, Last post: Jul. 24 2004, 17:55 ET)
Need info about welding???  (Started: Jul. 16 2004, 20:01 ET, Last post: Jul. 23 2004, 22:00 ET)
Can I arc-weld a pistol messed up rails?
Best Mill?  (Started: Jul. 23 2004, 08:58 ET, Last post: Jul. 23 2004, 17:40 ET)
Loking to buy a mill....
roll pin removal advice  (Started: Jul. 23 2004, 01:30 ET, Last post: Jul. 23 2004, 05:12 ET)
Watch making site  (Started: Jul. 22 2004, 12:02 ET, Last post: Jul. 22 2004, 12:02 ET)
Interesting antique and modern lathes
tooling and work holding suggestions  (Started: Jul. 20 2004, 07:57 ET, Last post: Jul. 21 2004, 20:15 ET)
Mill questions  (Started: Jul. 7 2004, 16:11 ET, Last post: Jul. 17 2004, 14:39 ET)
Please help!
Got my new Mill and Lathe set up  (Started: Jul. 7 2004, 12:59 ET, Last post: Jul. 17 2004, 13:46 ET)
Taig Micro Mill  (Started: Mar. 31 2004, 08:37 ET, Last post: Jul. 17 2004, 13:19 ET)
Opinions on this mill
Threading problems; Galling  (Started: Jun. 27 2004, 18:17 ET, Last post: Jul. 13 2004, 23:53 ET)
New to threading.
don't throw that old printer away  (Started: Jul. 8 2004, 21:38 ET, Last post: Jul. 9 2004, 01:07 ET)
until you strip the parts...
Tent Sale at Grizzly Springfield Mo.  (Started: Jul. 8 2004, 21:36 ET, Last post: Jul. 8 2004, 21:36 ET)
Small Knee Milling Machines  (Started: May 28 2004, 13:18 ET, Last post: Jul. 4 2004, 20:39 ET)
Anyone have links for what's out there?
Welder for the home shop?  (Started: Jun. 29 2004, 08:14 ET, Last post: Jul. 2 2004, 16:47 ET)
What house wiring issues will I have?
Any suggestions on a good CNC mill?  (Started: Mar. 6 2004, 23:22 ET, Last post: Jun. 25 2004, 18:23 ET)
new member
Help in mill  (Started: Mar. 17 2004, 12:31 ET, Last post: Jun. 24 2004, 07:35 ET)
help
Noise Level  (Started: May 28 2004, 18:44 ET, Last post: Jun. 24 2004, 07:27 ET)
Never used any machine tools....yet
What shank size endmills???  (Started: Jun. 18 2004, 08:24 ET, Last post: Jun. 20 2004, 09:11 ET)
are used to build a 1911???
Yahoo group for metalwork projects  (Started: Jun. 17 2004, 13:34 ET, Last post: Jun. 17 2004, 15:03 ET)
Site for sharing project info
Opinions on HF milling machine?  (Started: Feb. 2 2003, 17:35 ET, Last post: Jun. 17 2004, 13:43 ET)
1/4 scale bridgeport  (Started: Apr. 20 2002, 12:19 ET, Last post: Jun. 16 2004, 20:29 ET)
New product
Nibblers versus Shears  (Started: May 27 2004, 21:08 ET, Last post: Jun. 16 2004, 01:51 ET)
Which is better?
Barrel Broaching????  (Started: Jun. 5 2004, 08:06 ET, Last post: Jun. 15 2004, 17:03 ET)
Anyone knows about broaching machine?
Heat treating ovens?  (Started: Jun. 14 2004, 22:21 ET, Last post: Jun. 15 2004, 08:25 ET)
grizzly knee mill vs. rong fu mill drill  (Started: Jun. 6 2004, 13:00 ET, Last post: Jun. 14 2004, 04:01 ET)
need help deciding which way to go
WTK: Grizzly G3102 vs G3103  (Started: May 29 2004, 18:46 ET, Last post: Jun. 14 2004, 01:08 ET)
Is power feed worth $300.00?
Building A workbench  (Started: Feb. 11 2003, 22:32 ET, Last post: Jun. 13 2004, 09:27 ET)
Bridgeports on Ebay (rust, cleaning, wear, etc.)  (Started: Jun. 12 2004, 10:28 ET, Last post: Jun. 13 2004, 01:56 ET)
Not that I advocate abandoning this fine place...  (Started: Jun. 11 2004, 16:50 ET, Last post: Jun. 12 2004, 11:33 ET)
Drill press table recommendations  (Started: Jun. 6 2004, 12:16 ET, Last post: Jun. 8 2004, 14:57 ET)
Advice
Shop Built test function box  (Started: Mar. 24 2004, 17:10 ET, Last post: Jun. 2 2004, 21:15 ET)
How to
boring tools  (Started: May 28 2004, 10:06 ET, Last post: Jun. 2 2004, 10:20 ET)
boring tools
Phase Converter for 3 Phase Surface Grinder  (Started: Apr. 15 2004, 02:08 ET, Last post: Jun. 1 2004, 13:33 ET)
Looking for info on phase converters
Ameritech Mini-Mill/1???  (Started: May 24 2004, 15:13 ET, Last post: May 28 2004, 05:39 ET)
Heat treating options  (Started: May 17 2004, 21:29 ET, Last post: May 22 2004, 22:49 ET)
Advice on heat treating
Blasting cabinet set-up.  (Started: May 21 2004, 01:51 ET, Last post: May 22 2004, 21:14 ET)
mini-mill crushed gear  (Started: May 18 2004, 01:12 ET, Last post: May 18 2004, 11:39 ET)
how to prevent it?
Workshop Techniques  (Started: May 16 2004, 19:56 ET, Last post: May 16 2004, 21:53 ET)
Thread Cutting & the compound  (Started: Mar. 8 2004, 15:56 ET, Last post: May 12 2004, 23:12 ET)
Homemade Welding Positioner  (Started: Apr. 26 2004, 00:46 ET, Last post: May 9 2004, 13:30 ET)
Welder's Assistant  - A Weekend Project
AGI Machine Course Videos for sale  (Started: Apr. 22 2004, 09:56 ET, Last post: May 9 2004, 13:09 ET)
Selling all 3 courses
Any good books on CNC programming?  (Started: Apr. 19 2004, 19:54 ET, Last post: May 8 2004, 11:51 ET)
Hand scraping  (Started: May 4 2004, 20:02 ET, Last post: May 5 2004, 22:15 ET)
I wish I had a surface grinder
DRO option for mini-mill...  (Started: Apr. 14 2004, 14:42 ET, Last post: May 4 2004, 15:41 ET)
Center Drilling/reaming  (Started: Apr. 30 2004, 13:49 ET, Last post: May 2 2004, 21:33 ET)
For a FL die
Discount tools.  (Started: Apr. 24 2004, 13:51 ET, Last post: May 1 2004, 23:45 ET)
A place you may not know about.
Threading  (Started: Apr. 12 2004, 08:55 ET, Last post: Apr. 29 2004, 10:45 ET)
Edge Finder  (Started: Apr. 26 2004, 19:45 ET, Last post: Apr. 28 2004, 21:26 ET)
Edge Finder
trammingmini mill  (Started: Apr. 26 2004, 08:32 ET, Last post: Apr. 26 2004, 18:38 ET)
HF blast cabinet  (Started: Apr. 26 2004, 05:57 ET, Last post: Apr. 26 2004, 05:57 ET)
turning between centers  (Started: Apr. 20 2004, 22:39 ET, Last post: Apr. 24 2004, 09:08 ET)
Allen keys  (Started: Apr. 15 2004, 09:19 ET, Last post: Apr. 24 2004, 08:11 ET)
Dish Wheels  (Started: Apr. 4 2004, 11:14 ET, Last post: Apr. 24 2004, 02:47 ET)
Lathe bearings  (Started: Apr. 3 2004, 11:38 ET, Last post: Apr. 24 2004, 02:38 ET)
Combing with four brushes  (Started: Apr. 19 2004, 11:36 ET, Last post: Apr. 19 2004, 14:33 ET)
Is this DC motor OK
Unimat  (Started: Apr. 17 2004, 01:40 ET, Last post: Apr. 18 2004, 11:51 ET)
DRO's  (Started: Apr. 12 2004, 11:54 ET, Last post: Apr. 16 2004, 20:48 ET)
Harbor Freight Micro Mill
corelock  (Started: Apr. 14 2004, 19:21 ET, Last post: Apr. 15 2004, 00:44 ET)
Chuch jaws
Metric Threads  (Started: Apr. 12 2004, 19:23 ET, Last post: Apr. 14 2004, 23:37 ET)
To tram or not to tram.  (Started: Mar. 26 2004, 21:46 ET, Last post: Apr. 11 2004, 00:13 ET)
How do you really tram the mill for?
Smithy  (Started: Apr. 5 2004, 20:39 ET, Last post: Apr. 6 2004, 17:12 ET)
3-in-1
cncgunsmithing.com  (Started: Apr. 2 2004, 07:58 ET, Last post: Apr. 5 2004, 00:40 ET)
Grizzly G9972, any users out there?  (Started: Apr. 4 2004, 16:46 ET, Last post: Apr. 4 2004, 16:46 ET)
Anyone have this lathe? Comments?
Benchdrill to Mill  (Started: Mar. 31 2004, 21:11 ET, Last post: Apr. 1 2004, 22:57 ET)
CONVERSION?
Cup Wheel Arbor  (Started: Mar. 31 2004, 08:36 ET, Last post: Apr. 1 2004, 15:27 ET)
Gunsmithing Career..need advice  (Started: Mar. 24 2004, 00:16 ET, Last post: Apr. 1 2004, 14:46 ET)
Mini-Mill Spindle Bore  (Started: Mar. 31 2004, 08:32 ET, Last post: Mar. 31 2004, 08:32 ET)
WTB Die with thread pitch = 5/16 X 36 NS  (Started: Mar. 30 2004, 22:28 ET, Last post: Mar. 31 2004, 00:11 ET)
Harbor Freight sale  (Started: Mar. 28 2004, 10:00 ET, Last post: Mar. 28 2004, 10:00 ET)
Amazing prices until April 10.
Improvement on the Mini-Lathe  (Started: Mar. 13 2004, 12:51 ET, Last post: Mar. 27 2004, 21:41 ET)
Band Saw -- Which Blade?  (Started: Mar. 23 2004, 16:57 ET, Last post: Mar. 26 2004, 06:39 ET)
Fireproofing?  (Started: Mar. 24 2004, 12:30 ET, Last post: Mar. 25 2004, 14:44 ET)
Need Info on Fireproofing a welding area
Managing with a heavy chuck on the lathe  (Started: Mar. 7 2004, 04:16 ET, Last post: Mar. 23 2004, 16:07 ET)
vaccum chuck  (Started: Mar. 22 2004, 17:09 ET, Last post: Mar. 23 2004, 06:36 ET)
how to
Metric-to-TPI Conversion  (Started: Mar. 19 2004, 16:07 ET, Last post: Mar. 22 2004, 15:16 ET)
BOOKS FOR MINI-MILL?  (Started: Mar. 13 2004, 14:59 ET, Last post: Mar. 20 2004, 11:03 ET)
need some info
Making a Dovetail Cutter  (Started: Mar. 9 2004, 07:50 ET, Last post: Mar. 19 2004, 21:03 ET)
Bolt facing with end mill?  (Started: Mar. 8 2004, 15:02 ET, Last post: Mar. 19 2004, 11:31 ET)
JB weld to attach DRO?  (Started: Mar. 15 2004, 07:40 ET, Last post: Mar. 17 2004, 17:31 ET)
machine kits?  (Started: Mar. 10 2004, 20:26 ET, Last post: Mar. 10 2004, 21:07 ET)
R8 vs B&S no9  (Started: Mar. 9 2004, 03:02 ET, Last post: Mar. 9 2004, 13:25 ET)
HF versus Grizzly ?  (Started: Mar. 4 2004, 16:09 ET, Last post: Mar. 8 2004, 23:38 ET)
Whats the differance?
Atlas lathe speeds  (Started: Mar. 7 2004, 21:55 ET, Last post: Mar. 8 2004, 18:50 ET)
Help with Index Plates  (Started: Mar. 2 2004, 20:55 ET, Last post: Mar. 7 2004, 23:26 ET)
Home Foundry  (Started: Mar. 5 2004, 22:04 ET, Last post: Mar. 6 2004, 20:10 ET)
Where to buy cheap end mill sets?  (Started: Mar. 3 2004, 21:20 ET, Last post: Mar. 6 2004, 07:43 ET)
U-Build Machine & Power Tools Catalog  (Started: Jan. 19 2004, 21:23 ET, Last post: Mar. 5 2004, 21:24 ET)
New web catalog
Go Broke Slowly  (Started: Mar. 5 2004, 19:11 ET, Last post: Mar. 5 2004, 21:10 ET)
Build Your own Machine Tools
Tig Torch Plans  (Started: Mar. 4 2004, 09:31 ET, Last post: Mar. 4 2004, 23:50 ET)
Roughing End Mills  (Started: Mar. 4 2004, 07:27 ET, Last post: Mar. 4 2004, 21:03 ET)
benchtop mills???  (Started: Mar. 4 2004, 10:29 ET, Last post: Mar. 4 2004, 20:18 ET)
recomedations???
Brown & Sharpe No 9 Collets  (Started: Mar. 4 2004, 00:39 ET, Last post: Mar. 4 2004, 16:57 ET)
Enco Mill/Drill  (Started: Mar. 1 2004, 14:04 ET, Last post: Mar. 4 2004, 08:40 ET)
Dro's
Carbide Inserts  (Started: Feb. 25 2004, 09:28 ET, Last post: Mar. 3 2004, 20:14 ET)
An absolutely vexing threading problem...  (Started: Feb. 17 2004, 20:07 ET, Last post: Mar. 3 2004, 12:02 ET)
loading beta mag with SS109...........
Inexpensive parallels  (Started: Mar. 2 2004, 16:25 ET, Last post: Mar. 3 2004, 10:51 ET)
ADVICE/OPINIONS  (Started: Feb. 24 2004, 19:39 ET, Last post: Mar. 2 2004, 06:27 ET)
Just bought a new milling machine
Metal strengths  (Started: Mar. 2 2004, 02:10 ET, Last post: Mar. 2 2004, 03:33 ET)
rockwell conversion
Birmingham YCL1236GH  (Started: Mar. 1 2004, 16:28 ET, Last post: Mar. 1 2004, 19:39 ET)
Identify the origin  (Started: Feb. 20 2004, 10:12 ET, Last post: Mar. 1 2004, 13:45 ET)
Grizzly Lathe
lathes  (Started: Feb. 21 2004, 12:07 ET, Last post: Feb. 29 2004, 21:31 ET)
Harbor Freight autodarkening helmet sale  (Started: Jun. 15 2003, 11:40 ET, Last post: Feb. 29 2004, 17:43 ET)
(aka: Welding newbie needs help)
HF 47158-1VGA  (Started: Feb. 28 2004, 21:11 ET, Last post: Feb. 29 2004, 16:07 ET)
Harbor Freight Mill
need help on HF mill/drill?  (Started: Feb. 20 2004, 20:29 ET, Last post: Feb. 28 2004, 13:01 ET)
Boring Tools & Lathes  (Started: Feb. 22 2004, 17:16 ET, Last post: Feb. 27 2004, 01:59 ET)
Total newbe mistake  (Started: Feb. 25 2004, 18:59 ET, Last post: Feb. 25 2004, 20:13 ET)
Internal Thread Cutting  (Started: Feb. 20 2004, 16:16 ET, Last post: Feb. 23 2004, 18:43 ET)
Newbie bought a mill  (Started: Feb. 20 2004, 19:03 ET, Last post: Feb. 21 2004, 16:59 ET)
Milling vise?  (Started: Feb. 17 2004, 20:45 ET, Last post: Feb. 20 2004, 14:03 ET)
Newbie alert!
Griz Mini-Mill - Converting to R8 Spindle  (Started: Feb. 18 2004, 23:29 ET, Last post: Feb. 19 2004, 19:55 ET)
My FIRST THREAD CUTTING  (Started: Feb. 17 2004, 19:08 ET, Last post: Feb. 18 2004, 15:22 ET)
Size questions regarding mill/drills.  (Started: Feb. 15 2004, 19:50 ET, Last post: Feb. 16 2004, 10:37 ET)
New to Miling. Have some Questions  (Started: Jan. 25 2004, 19:33 ET, Last post: Feb. 15 2004, 16:48 ET)
I've decided on a Grizzly :-)  (Started: Dec. 4 2003, 19:36 ET, Last post: Feb. 15 2004, 16:42 ET)
mini mill for newbe  (Started: Feb. 8 2004, 14:51 ET, Last post: Feb. 15 2004, 16:37 ET)
grizzly mini mill  (Started: Feb. 10 2004, 20:48 ET, Last post: Feb. 15 2004, 16:34 ET)
tramming
Drilling in at an Angle  (Started: Jan. 23 2004, 15:58 ET, Last post: Feb. 15 2004, 08:10 ET)
Chucker vs Engine  (Started: Feb. 9 2004, 00:11 ET, Last post: Feb. 12 2004, 00:00 ET)
It's a Bridgeport mill...  (Started: Sep. 2 2003, 00:08 ET, Last post: Feb. 5 2004, 22:51 ET)
But what else can you tell about it?
Minimum Spindle Bore needed question  (Started: Jan. 3 2004, 10:33 ET, Last post: Feb. 5 2004, 08:34 ET)
HF Mini-80 Tig  Pedal  (Started: Feb. 3 2004, 08:02 ET, Last post: Feb. 3 2004, 12:09 ET)
Types of CNC Machines  (Started: Jan. 15 2004, 01:15 ET, Last post: Feb. 3 2004, 05:15 ET)
falling block action  (Started: Jan. 26 2004, 19:49 ET, Last post: Feb. 2 2004, 16:12 ET)
building your own
Ahh something went clunk!!!  (Started: Jan. 31 2004, 15:41 ET, Last post: Feb. 2 2004, 01:28 ET)
Lathe Review  (Started: Jan. 31 2004, 08:34 ET, Last post: Feb. 1 2004, 02:28 ET)
Birmingham
Need Picatinny Rail Help  (Started: Jan. 19 2004, 16:07 ET, Last post: Jan. 24 2004, 04:25 ET)
Blasting  (Started: Jan. 20 2004, 20:34 ET, Last post: Jan. 22 2004, 18:05 ET)
Tig Question  (Started: Dec. 26 2003, 20:23 ET, Last post: Jan. 21 2004, 12:46 ET)
Grizzly Vs Smithy  (Started: Jan. 6 2004, 09:49 ET, Last post: Jan. 21 2004, 12:25 ET)
What do you guys Think?
Micro Kinetics CNC  (Started: Jan. 18 2004, 15:41 ET, Last post: Jan. 18 2004, 22:29 ET)
HF Mini-80 Invertor Welder... Made By...  (Started: Jan. 17 2004, 19:11 ET, Last post: Jan. 18 2004, 19:47 ET)
soggy  (Started: Jan. 14 2004, 10:27 ET, Last post: Jan. 15 2004, 08:06 ET)
Three-wire method  (Started: Jan. 14 2004, 06:58 ET, Last post: Jan. 14 2004, 21:26 ET)
what is it?
Chuck back plate  (Started: Jan. 14 2004, 16:51 ET, Last post: Jan. 14 2004, 16:51 ET)
blasting medium and spot welding  (Started: Jan. 8 2004, 22:14 ET, Last post: Jan. 8 2004, 22:14 ET)
Dovetails  (Started: Jan. 6 2004, 17:37 ET, Last post: Jan. 8 2004, 09:59 ET)
How to ?
What type of dremel?  (Started: Jan. 6 2004, 23:18 ET, Last post: Jan. 7 2004, 19:11 ET)
Lathe threading  (Started: Jan. 2 2004, 20:10 ET, Last post: Jan. 7 2004, 18:08 ET)
AGI machine shop courses...anyone interested??  (Started: Jan. 2 2004, 03:57 ET, Last post: Jan. 5 2004, 20:59 ET)
may sell mine...like new
Truing Mill Table  (Started: Jan. 2 2004, 18:54 ET, Last post: Jan. 5 2004, 15:48 ET)
sharpening end mills  (Started: Dec. 27 2003, 14:32 ET, Last post: Jan. 4 2004, 12:19 ET)
with a 5C spin fixture?
Mirror finish on Steel  (Started: Dec. 30 2003, 19:53 ET, Last post: Jan. 4 2004, 12:05 ET)
9" Ryobi band saw  (Started: Dec. 23 2003, 22:00 ET, Last post: Jan. 1 2004, 18:09 ET)
Where to get a cheap slide table?  (Started: Dec. 24 2003, 21:54 ET, Last post: Dec. 25 2003, 23:22 ET)
for my drill press.
I want to get a drill press  (Started: Dec. 12 2003, 21:17 ET, Last post: Dec. 25 2003, 22:16 ET)
bench top drill press's
Useful project advice/recommendations  (Started: Dec. 16 2003, 16:37 ET, Last post: Dec. 22 2003, 00:44 ET)
plunge cut chatter, is that normal?  (Started: Dec. 19 2003, 13:30 ET, Last post: Dec. 21 2003, 22:12 ET)
Question on using bigger end mills  (Started: Nov. 29 2003, 15:43 ET, Last post: Dec. 21 2003, 19:40 ET)
using a digital vernier gauge on a shumatec  (Started: Dec. 17 2003, 23:53 ET, Last post: Dec. 21 2003, 15:51 ET)
Counter sink  (Started: Dec. 19 2003, 08:15 ET, Last post: Dec. 19 2003, 10:49 ET)
Can it be used to mill?
Got my Homier Mini-Mill in :-)  (Started: Dec. 17 2003, 22:37 ET, Last post: Dec. 18 2003, 11:39 ET)
wandering deep hole drilling titanium  (Started: Nov. 20 2003, 13:13 ET, Last post: Dec. 17 2003, 18:06 ET)
mini mill, cheap DRO's, and remote display  (Started: Dec. 6 2003, 09:08 ET, Last post: Dec. 13 2003, 22:45 ET)
Help me with my shop  (Started: Sep. 28 2003, 12:08 ET, Last post: Dec. 12 2003, 14:23 ET)
HF Mini-Mill Tramming  (Started: Dec. 7 2003, 13:53 ET, Last post: Dec. 8 2003, 19:10 ET)
Internal Tapers  (Started: Dec. 7 2003, 01:12 ET, Last post: Dec. 7 2003, 03:21 ET)
How do you do it?
What do I need for a new mill?  (Started: Dec. 4 2003, 21:45 ET, Last post: Dec. 5 2003, 17:18 ET)
Palmgren Rotary table and ??  (Started: Dec. 4 2003, 13:57 ET, Last post: Dec. 4 2003, 14:48 ET)
indexing plates
horizontal or vertical mill?  (Started: Dec. 3 2003, 21:07 ET, Last post: Dec. 4 2003, 13:39 ET)
horizontal or vertical mill?
I have access to a relatively new bridgeport clone  (Started: Dec. 2 2003, 15:19 ET, Last post: Dec. 3 2003, 11:16 ET)
Newbie needs advice
Homier mill/drill  (Started: Nov. 19 2003, 20:42 ET, Last post: Dec. 1 2003, 12:46 ET)
Experience?
Bargain Sandblast cabinet at Homier  (Started: Nov. 22 2003, 15:38 ET, Last post: Nov. 27 2003, 21:04 ET)
Back in stock
Comments on Grizzly 3616 Vert mill  (Started: Nov. 17 2003, 14:40 ET, Last post: Nov. 20 2003, 22:33 ET)
New guy seeking advice on Mill  (Started: Nov. 20 2003, 08:56 ET, Last post: Nov. 20 2003, 12:26 ET)
Central Machinery Mill/Drill From HF
Rotary table vs. Dividing head  (Started: Nov. 13 2003, 15:08 ET, Last post: Nov. 19 2003, 15:28 ET)
What's the difference?
Atlas Lathe worth the price  (Started: Nov. 15 2003, 14:34 ET, Last post: Nov. 16 2003, 13:37 ET)
KDN Tool Mini-Mill CNC Conversion  (Started: Nov. 12 2003, 16:43 ET, Last post: Nov. 16 2003, 02:59 ET)
Scope buy on Ebay.  (Started: Oct. 7 2003, 23:12 ET, Last post: Nov. 15 2003, 13:10 ET)
Ha Ha HA
Need help to make large hole  (Started: Nov. 14 2003, 06:09 ET, Last post: Nov. 14 2003, 21:24 ET)
making a reciever wrench
MicroMark inch conversion for Mini-mill  (Started: Oct. 31 2003, 01:38 ET, Last post: Nov. 13 2003, 00:54 ET)
Need tap & die size for Lyman 310 die threads  (Started: Nov. 9 2003, 13:01 ET, Last post: Nov. 12 2003, 14:10 ET)
Want to make adapter for Lyman No.55 PM
Building a mount for DRO's  (Started: Nov. 1 2003, 21:41 ET, Last post: Nov. 11 2003, 20:41 ET)
CBX 3d by Shooting Star Technology
Enco  (Started: Nov. 10 2003, 20:49 ET, Last post: Nov. 10 2003, 20:49 ET)
free shipping
Question about vise keys  (Started: Nov. 9 2003, 08:46 ET, Last post: Nov. 9 2003, 22:57 ET)
Wilton Lathes  (Started: Nov. 5 2003, 01:18 ET, Last post: Nov. 8 2003, 10:54 ET)
Retrieving small broken drill bits  (Started: Oct. 12 2003, 15:31 ET, Last post: Nov. 4 2003, 18:32 ET)
Broken drill bit
Motor on Jet mill went south  (Started: Oct. 7 2003, 13:36 ET, Last post: Nov. 2 2003, 00:52 ET)
Homemade Heat treat Furnace  (Started: Oct. 30 2003, 22:06 ET, Last post: Oct. 31 2003, 14:33 ET)
Help my memory!
Spring collets rule  (Started: Oct. 6 2003, 00:15 ET, Last post: Oct. 29 2003, 15:22 ET)
A little indulgence that made me happy.
Mill question  (Started: Oct. 26 2003, 21:29 ET, Last post: Oct. 27 2003, 05:58 ET)
Which mini/benchtop mill
agi milling course  (Started: Oct. 21 2003, 22:07 ET, Last post: Oct. 25 2003, 20:44 ET)
Rust prevenitive on mill table??  (Started: Oct. 12 2003, 17:27 ET, Last post: Oct. 22 2003, 22:11 ET)
Rust
Buy and Sell Machine Parts.  (Started: Oct. 20 2003, 07:40 ET, Last post: Oct. 20 2003, 07:40 ET)
Where to find it.
cnc programs  (Started: Sep. 1 2003, 22:12 ET, Last post: Oct. 19 2003, 21:10 ET)
mastercam or ???
HF mini-lathe--Shipped with grease?  (Started: Oct. 12 2003, 18:03 ET, Last post: Oct. 18 2003, 07:53 ET)
M228 FUSE  (Started: Oct. 17 2003, 13:53 ET, Last post: Oct. 17 2003, 15:29 ET)
HOW TO
Specs on chrome moly  (Started: Oct. 6 2003, 22:28 ET, Last post: Oct. 7 2003, 22:16 ET)
dwg files  (Started: Sep. 26 2003, 05:48 ET, Last post: Oct. 7 2003, 18:53 ET)
CNC machining software  (Started: Sep. 3 2003, 07:10 ET, Last post: Oct. 7 2003, 17:48 ET)
Mig or Stick, Tig which ot buy?  (Started: Oct. 5 2003, 20:41 ET, Last post: Oct. 6 2003, 18:58 ET)
EDM machines....  (Started: Oct. 5 2003, 20:09 ET, Last post: Oct. 5 2003, 23:50 ET)
a hairbrained idea.....
The Great Smithy Debate  (Started: Sep. 29 2003, 20:11 ET, Last post: Oct. 5 2003, 02:11 ET)
Squaring the vise in mill  (Started: Sep. 27 2003, 09:05 ET, Last post: Oct. 4 2003, 19:54 ET)
Slowing down a 9x20 lathe  (Started: Oct. 3 2003, 01:18 ET, Last post: Oct. 3 2003, 19:14 ET)
Best method?
GrindingWheels & Carbide  (Started: Oct. 3 2003, 07:47 ET, Last post: Oct. 3 2003, 11:07 ET)
Can milling operatiosn be done with a lathe?  (Started: Oct. 1 2003, 12:33 ET, Last post: Oct. 2 2003, 23:55 ET)
10" Drill Press for Milling?  (Started: Oct. 1 2003, 00:40 ET, Last post: Oct. 2 2003, 09:23 ET)
safe or not?
Holy Schmokes - Vibration city  (Started: Sep. 29 2003, 11:24 ET, Last post: Oct. 1 2003, 19:54 ET)
minitech cnc mill  (Started: Sep. 27 2003, 20:54 ET, Last post: Oct. 1 2003, 18:42 ET)
Hows This Milling Machine  (Started: Sep. 28 2003, 12:35 ET, Last post: Sep. 29 2003, 12:25 ET)
Grizzly G3102/G3103  (Started: Sep. 27 2003, 12:57 ET, Last post: Sep. 27 2003, 12:57 ET)
opinions
Lathe Oil  (Started: Aug. 21 2003, 20:38 ET, Last post: Sep. 26 2003, 15:12 ET)
What are you useing?
Mini-Mill chuck removal  (Started: Sep. 25 2003, 22:42 ET, Last post: Sep. 26 2003, 06:46 ET)
Socom mag block  (Started: Sep. 22 2003, 12:39 ET, Last post: Sep. 23 2003, 16:34 ET)
New Mill (Grizzly G3616)... What do you think?  (Started: Sep. 21 2003, 00:45 ET, Last post: Sep. 23 2003, 01:10 ET)
HELP! Lathe question  (Started: Sep. 22 2003, 22:29 ET, Last post: Sep. 22 2003, 22:29 ET)
Would this mill be worth looking into?  (Started: Sep. 15 2003, 15:12 ET, Last post: Sep. 22 2003, 16:20 ET)
Dividing head\spiral milling ?  (Started: Sep. 18 2003, 18:48 ET, Last post: Sep. 21 2003, 20:51 ET)
Advice on mounting Mill and Lathe  (Started: Sep. 20 2003, 15:16 ET, Last post: Sep. 21 2003, 15:18 ET)
New toys and I want them mounted right
Is this the Harbor Freight mill everyone mentions?  (Started: Sep. 21 2003, 00:13 ET, Last post: Sep. 21 2003, 09:47 ET)
Best blueprints for milling 0% 1911 slides  (Started: Sep. 20 2003, 05:42 ET, Last post: Sep. 20 2003, 05:42 ET)
Grinding Wheels  (Started: Sep. 19 2003, 07:48 ET, Last post: Sep. 20 2003, 02:10 ET)
Which one?
Making a 1911 magwell insert  (Started: Sep. 19 2003, 11:40 ET, Last post: Sep. 19 2003, 22:58 ET)
lathe or combo  (Started: Sep. 14 2003, 10:48 ET, Last post: Sep. 16 2003, 08:50 ET)
FAL Guages  (Started: Apr. 24 2003, 07:35 ET, Last post: Sep. 14 2003, 11:37 ET)
Mini-Mill must have accesories?  (Started: Sep. 14 2003, 11:01 ET, Last post: Sep. 14 2003, 11:22 ET)
Craftsmen Atlas lathe  (Started: Dec. 16 2002, 11:10 ET, Last post: Sep. 14 2003, 09:39 ET)
anyone heard of one?
Case hardened tap ?  (Started: Sep. 13 2003, 08:11 ET, Last post: Sep. 13 2003, 18:01 ET)
Can it be done?
minitech cnc mini mill/1...pros/cons???  (Started: Sep. 13 2003, 00:52 ET, Last post: Sep. 13 2003, 17:04 ET)
is it worth it,an how user friendly
Lathe question  (Started: Sep. 6 2003, 15:46 ET, Last post: Sep. 7 2003, 09:07 ET)
Sieg C5 Lathe, any good?
The joys of garage sales  (Started: Sep. 5 2003, 00:37 ET, Last post: Sep. 6 2003, 00:35 ET)
tooling found!
what mini mill best to buy??  (Started: Sep. 1 2003, 02:59 ET, Last post: Sep. 5 2003, 18:41 ET)
newbie question
tungsten  (Started: Sep. 1 2003, 22:18 ET, Last post: Sep. 3 2003, 18:28 ET)
how to machine
Who has the oldest lathe??  (Started: Sep. 1 2003, 00:17 ET, Last post: Sep. 1 2003, 23:57 ET)
Can anybody tell me what it is?
DRO  (Started: Aug. 20 2003, 19:06 ET, Last post: Aug. 30 2003, 20:01 ET)
DROs for Enco Mill/Drill: Making progress!  (Started: Aug. 1 2003, 09:41 ET, Last post: Aug. 30 2003, 12:10 ET)
Budget of $400, using linear scales
Anyone have an Atlas Lathe instruction book  (Started: Aug. 18 2003, 00:04 ET, Last post: Aug. 27 2003, 10:24 ET)
Need info from it
Gear Lubication on an Atlas  (Started: Aug. 26 2003, 07:08 ET, Last post: Aug. 26 2003, 07:08 ET)
chambering problems  (Started: Aug. 17 2003, 22:47 ET, Last post: Aug. 24 2003, 14:38 ET)
does this make sense
Gear Lubrication?  (Started: Aug. 23 2003, 15:43 ET, Last post: Aug. 23 2003, 15:43 ET)
Dis-Assemby of a Craftman/Atlas 6x24  (Started: Aug. 21 2003, 09:46 ET, Last post: Aug. 22 2003, 16:54 ET)
Z-Axis DRO install on Mini Mill  (Started: Aug. 18 2003, 15:55 ET, Last post: Aug. 20 2003, 00:26 ET)
In case anybody is wanting to add one
Value of an old Craftsman  (Started: Aug. 3 2003, 14:54 ET, Last post: Aug. 19 2003, 17:10 ET)
the Lathe, not the man...
Cleaning up Files  (Started: Jul. 25 2003, 08:08 ET, Last post: Aug. 19 2003, 16:42 ET)
the METAL kind
Please Read: Nearly new CNC mill & computer  (Started: Aug. 4 2003, 23:03 ET, Last post: Aug. 14 2003, 20:16 ET)
Joe Melice's machine
Splain too me.....  (Started: Aug. 9 2003, 21:35 ET, Last post: Aug. 14 2003, 16:24 ET)
Just got a  20 ton Press  (Started: Aug. 10 2003, 20:44 ET, Last post: Aug. 12 2003, 19:54 ET)
How to build spot welder  (Started: Jun. 26 2003, 11:20 ET, Last post: Aug. 10 2003, 00:15 ET)
Identity?  (Started: Aug. 8 2003, 10:22 ET, Last post: Aug. 9 2003, 14:06 ET)
Name that part...
stainless tubing  (Started: Aug. 5 2003, 20:07 ET, Last post: Aug. 7 2003, 20:01 ET)
anyone have a good source
Quick Setting Toolmaker's Vise  (Started: Aug. 3 2003, 15:00 ET, Last post: Aug. 6 2003, 13:04 ET)
Re powering a 3 phase motor with a single phase  (Started: May 29 2003, 09:58 ET, Last post: Aug. 4 2003, 15:02 ET)
Anyone done this?
Advice on buying an Atlas 12x48 lathe...  (Started: Jul. 29 2003, 19:00 ET, Last post: Aug. 1 2003, 20:44 ET)
Newbie is going to get a mill.  (Started: Jul. 20 2003, 23:14 ET, Last post: Aug. 1 2003, 09:15 ET)
How bout an electric induction welders ???  (Started: Jul. 29 2003, 08:01 ET, Last post: Jul. 29 2003, 08:01 ET)
Turning barrels  (Started: Jul. 10 2003, 11:39 ET, Last post: Jul. 20 2003, 22:55 ET)
Who what where why when and how?
#30 Taper tool holders  (Started: Jul. 13 2003, 02:22 ET, Last post: Jul. 20 2003, 03:00 ET)
Working on a budget!I
gingery shop tools?  (Started: Jul. 6 2003, 06:55 ET, Last post: Jul. 17 2003, 00:46 ET)
any experience?
Lathe on Ebay  (Started: Jul. 12 2003, 12:03 ET, Last post: Jul. 13 2003, 01:30 ET)
probably wouldn't turn barrels very well
Turning Hard Tool Steel  (Started: Jul. 5 2003, 13:21 ET, Last post: Jul. 10 2003, 09:33 ET)
Indicator Stem  (Started: Jul. 5 2003, 13:03 ET, Last post: Jul. 10 2003, 09:29 ET)
Welders  (Started: Jun. 17 2003, 14:57 ET, Last post: Jul. 8 2003, 10:22 ET)
A question on what to get
Need some help mounting a countershaft  (Started: Jun. 14 2003, 15:49 ET, Last post: Jul. 1 2003, 22:28 ET)
pulley housing, on 6" Craftsman lathe
How to Set Taper  (Started: Jun. 30 2003, 22:19 ET, Last post: Jul. 1 2003, 22:04 ET)
Hold-Down Panic Attack!  (Started: Jun. 24 2003, 18:33 ET, Last post: Jun. 25 2003, 20:41 ET)
Free steel shim stock!  (Started: Jun. 14 2003, 16:17 ET, Last post: Jun. 23 2003, 16:57 ET)
Dumb Lathe Question  (Started: Jun. 4 2003, 23:45 ET, Last post: Jun. 23 2003, 00:24 ET)
Definition?
DIY CNC  (Started: May 28 2003, 21:40 ET, Last post: Jun. 13 2003, 11:19 ET)
Build it yourself
Grizzly Mini-Mill CNC conversion?  (Started: Jun. 3 2003, 17:50 ET, Last post: Jun. 13 2003, 02:00 ET)
Has anyone made this conv?
Need info on machining and customizing 1911 slides  (Started: Jun. 2 2003, 05:51 ET, Last post: Jun. 12 2003, 21:34 ET)
Using 3 in 1 machinery for home shop  (Started: Jun. 5 2003, 08:14 ET, Last post: Jun. 5 2003, 10:02 ET)
Multi-purpose machines Mill+Lathe+Drill
anyone willing to show a newbie  (Started: May 31 2003, 12:42 ET, Last post: Jun. 4 2003, 13:53 ET)
actually a newbie in Tucson Az
Clamping to a vise  (Started: May 28 2003, 08:37 ET, Last post: Jun. 2 2003, 08:38 ET)
Free CNC Software  (Started: May 30 2003, 23:56 ET, Last post: May 31 2003, 11:38 ET)
Knee type benchtop mills?  (Started: May 6 2003, 16:21 ET, Last post: May 29 2003, 05:48 ET)
gnats a$$ to a mini mill  (Started: May 28 2003, 17:04 ET, Last post: May 28 2003, 18:40 ET)
Build a center steady ?  (Started: May 13 2003, 19:13 ET, Last post: May 28 2003, 07:50 ET)
Have any of you clever folks ever tried?
Combination Machines  (Started: May 22 2003, 11:37 ET, Last post: May 26 2003, 10:48 ET)
Do they work?
Anyone learn to run a mill at Community Collage  (Started: May 16 2003, 23:53 ET, Last post: May 24 2003, 23:59 ET)
New lathe found  (Started: May 20 2003, 21:59 ET, Last post: May 23 2003, 23:01 ET)
CNC Machining Centers  (Started: May 21 2003, 18:21 ET, Last post: May 23 2003, 21:02 ET)
Small Affordable Machines
5C collet attachment?  (Started: May 22 2003, 20:28 ET, Last post: May 22 2003, 23:56 ET)
Need info on one for an MT-5 headstock
Floor Covering  (Started: May 18 2003, 02:00 ET, Last post: May 21 2003, 00:53 ET)
Keeping oil off the cement
Lathe Question  (Started: May 12 2003, 18:48 ET, Last post: May 20 2003, 23:29 ET)
Ever hear of Star manufacturing.
Finally!  (Started: Feb. 8 2003, 01:05 ET, Last post: May 20 2003, 23:21 ET)
small mill finds a new home.
Belt Sanders and you...  (Started: May 20 2003, 04:54 ET, Last post: May 20 2003, 04:54 ET)
..and how I broke mine (really long)
New to me mill  (Started: May 18 2003, 18:06 ET, Last post: May 19 2003, 14:10 ET)
M head bridgeport
Metal Working tips  (Started: May 19 2003, 13:21 ET, Last post: May 19 2003, 13:21 ET)
lathe help  (Started: May 14 2003, 20:21 ET, Last post: May 17 2003, 14:29 ET)
looking for good lathe
Lathe Gears  (Started: May 11 2003, 12:41 ET, Last post: May 14 2003, 22:50 ET)
My mini mill  (Started: May 12 2003, 17:00 ET, Last post: May 12 2003, 17:02 ET)
works well
Cintiversal Manual  (Started: May 12 2003, 09:13 ET, Last post: May 12 2003, 09:13 ET)
Need a Manual
bridgeport manual  (Started: May 3 2003, 11:00 ET, Last post: May 10 2003, 21:44 ET)
who else needs one
Barker Engineering Co. Milling Mach.?  (Started: Apr. 30 2003, 23:08 ET, Last post: May 9 2003, 23:45 ET)
Manual & Pic's.
Information  (Started: May 8 2003, 21:32 ET, Last post: May 9 2003, 07:46 ET)
Drill Rod
Tiny Slots?  (Started: May 2 2003, 16:28 ET, Last post: May 6 2003, 07:29 ET)
Tip angle of standard drill bits?  (Started: May 4 2003, 15:54 ET, Last post: May 5 2003, 19:15 ET)
Adustable Endmill.???  (Started: Apr. 29 2003, 07:33 ET, Last post: May 5 2003, 03:17 ET)
Question: M-head Collets?  (Started: May 1 2003, 14:05 ET, Last post: May 4 2003, 23:53 ET)
Bridgeport Collets
AutoCAD Q: Section Lines?  (Started: May 2 2003, 14:30 ET, Last post: May 3 2003, 12:58 ET)
fiber washer source ?  (Started: Apr. 28 2003, 20:25 ET, Last post: May 2 2003, 22:44 ET)
metal question  (Started: Apr. 24 2003, 12:06 ET, Last post: Apr. 30 2003, 23:58 ET)
Power feed on mini-lathe  (Started: Apr. 27 2003, 23:34 ET, Last post: Apr. 29 2003, 12:23 ET)
WTK: "back gear"  (Started: Apr. 28 2003, 02:47 ET, Last post: Apr. 28 2003, 22:28 ET)
Drill Sharpening Jig?  (Started: Apr. 27 2003, 23:15 ET, Last post: Apr. 28 2003, 10:45 ET)
Home Grown Jig
Yavapai slide  holder  (Started: Apr. 27 2003, 19:07 ET, Last post: Apr. 27 2003, 19:07 ET)
I would like spec.'s for slide holder
New Mill  (Started: Apr. 26 2003, 01:00 ET, Last post: Apr. 27 2003, 07:37 ET)
I finally bought a mill
Bridgeport unloading advice PLEASE  (Started: Apr. 24 2003, 18:58 ET, Last post: Apr. 26 2003, 20:42 ET)
VFD  (Started: Apr. 14 2003, 14:24 ET, Last post: Apr. 26 2003, 16:11 ET)
On a 3 phase motor
Turning vs. Grinding  (Started: Apr. 25 2003, 09:27 ET, Last post: Apr. 25 2003, 13:05 ET)
Finding the center  (Started: Apr. 17 2003, 07:30 ET, Last post: Apr. 24 2003, 21:18 ET)
Lathe Crazy!  (Started: Apr. 14 2003, 17:12 ET, Last post: Apr. 24 2003, 19:02 ET)
LATHE Tailstock HELP!!  (Started: Apr. 24 2003, 10:11 ET, Last post: Apr. 24 2003, 14:15 ET)
Resizing Bullets  (Started: Mar. 20 2003, 23:29 ET, Last post: Apr. 24 2003, 09:46 ET)
Trump lathe?  (Started: Apr. 21 2003, 11:36 ET, Last post: Apr. 23 2003, 17:39 ET)
how are they?(need to know today)
Backlash  (Started: Apr. 17 2003, 07:09 ET, Last post: Apr. 21 2003, 09:26 ET)
Identify please  (Started: Apr. 18 2003, 03:02 ET, Last post: Apr. 18 2003, 15:39 ET)
Mill Quill PULLS when tightened  (Started: Apr. 17 2003, 07:07 ET, Last post: Apr. 17 2003, 17:16 ET)
Lines in the finish  (Started: Apr. 8 2003, 23:10 ET, Last post: Apr. 17 2003, 15:24 ET)
Lathe turning stuff
Can't stop the chatter!!!!  (Started: Apr. 15 2003, 02:33 ET, Last post: Apr. 16 2003, 21:00 ET)
Mini-Mill Quill Leadscrew  (Started: Apr. 15 2003, 17:03 ET, Last post: Apr. 15 2003, 17:03 ET)
double post  (Started: Apr. 15 2003, 12:08 ET, Last post: Apr. 15 2003, 12:08 ET)
Can't stop the chatter!!!!  (Started: Apr. 15 2003, 02:32 ET, Last post: Apr. 15 2003, 02:32 ET)
Interfacing cheap DRO's  (Started: Sep. 28 2002, 08:56 ET, Last post: Apr. 13 2003, 12:55 ET)
formerly CALERO supply
First Mill  (Started: Mar. 19 2003, 23:02 ET, Last post: Apr. 11 2003, 21:50 ET)
Looking for opinions/advice
HF Mini-Mill Quill Dial  (Started: Apr. 11 2003, 10:39 ET, Last post: Apr. 11 2003, 14:16 ET)
Mini Mill for Gun Projects  (Started: Apr. 10 2003, 23:32 ET, Last post: Apr. 11 2003, 10:36 ET)
Good Choice for Beginner
Where to start?  (Started: Apr. 3 2003, 22:37 ET, Last post: Apr. 10 2003, 21:27 ET)
wanna build a 1911
where to get a good, small lathe,used  (Started: Apr. 9 2003, 23:47 ET, Last post: Apr. 9 2003, 23:47 ET)
preferably with all the tooling. I have
Bison Lathe Chuck if anyone is interested over  (Started: Apr. 9 2003, 22:40 ET, Last post: Apr. 9 2003, 22:40 ET)
on the trade board....or contact me.Thnx
magnetized milling vise?  (Started: Apr. 9 2003, 16:03 ET, Last post: Apr. 9 2003, 17:21 ET)
magnetized milling vise?
Lathe Cutting Tools  (Started: Mar. 31 2003, 08:17 ET, Last post: Apr. 9 2003, 14:02 ET)
Enlarge 3-Jaw Chuck Center  (Started: Apr. 6 2003, 17:11 ET, Last post: Apr. 8 2003, 01:47 ET)
New handles for mill?  (Started: Mar. 31 2003, 07:26 ET, Last post: Apr. 7 2003, 12:46 ET)
AutoCAD help please?!  (Started: Mar. 30 2003, 13:02 ET, Last post: Apr. 5 2003, 10:25 ET)
weird selection problem
Cutting bar stock w/o a Bandsaw  (Started: Mar. 20 2003, 21:23 ET, Last post: Apr. 4 2003, 19:17 ET)
New Harbor Freight store  (Started: Apr. 1 2003, 20:27 ET, Last post: Apr. 3 2003, 13:53 ET)
Depth of cut Dimensions on a lathe  (Started: Mar. 31 2003, 18:11 ET, Last post: Apr. 3 2003, 10:34 ET)
help me choose a lathe  (Started: Mar. 30 2003, 11:54 ET, Last post: Apr. 3 2003, 10:03 ET)
need shop equipment advice  (Started: Apr. 2 2003, 23:57 ET, Last post: Apr. 3 2003, 00:44 ET)
Should I get this mill/drill?  (Started: Apr. 1 2003, 14:48 ET, Last post: Apr. 2 2003, 16:05 ET)
Steel letter/number Stamping set  (Started: Apr. 1 2003, 08:06 ET, Last post: Apr. 2 2003, 11:08 ET)
I bought this, now how do I use it. . .
Measuring round stock  (Started: Mar. 31 2003, 18:24 ET, Last post: Apr. 1 2003, 10:36 ET)
Final finish cut on a lathe  (Started: Mar. 31 2003, 18:07 ET, Last post: Apr. 1 2003, 08:06 ET)
New 7x14 Problems  (Started: Mar. 28 2003, 12:17 ET, Last post: Mar. 31 2003, 03:07 ET)
#2 Morse Tapers  (Started: Mar. 27 2003, 20:54 ET, Last post: Mar. 30 2003, 22:45 ET)
Brass?  (Started: Mar. 28 2003, 17:52 ET, Last post: Mar. 29 2003, 12:45 ET)
Tap and drill chart...Die chart???  (Started: Mar. 26 2003, 23:41 ET, Last post: Mar. 29 2003, 10:11 ET)
Lathe Centers Off!  (Started: Mar. 26 2003, 15:45 ET, Last post: Mar. 28 2003, 00:19 ET)
Homier Show this weekend in norcal  (Started: Mar. 27 2003, 05:14 ET, Last post: Mar. 27 2003, 05:14 ET)
Antioch, to be precise...
FAL from a Block?  (Started: Mar. 26 2003, 09:19 ET, Last post: Mar. 26 2003, 15:57 ET)
7x14 has Arrived!!!  (Started: Mar. 22 2003, 17:09 ET, Last post: Mar. 23 2003, 16:23 ET)
Time for a sewing class, kids...  (Started: Mar. 20 2003, 16:16 ET, Last post: Mar. 22 2003, 15:02 ET)
Indexable endmills are sweet!  (Started: Mar. 19 2003, 00:39 ET, Last post: Mar. 20 2003, 21:13 ET)
Is this useful?  (Started: Mar. 20 2003, 18:07 ET, Last post: Mar. 20 2003, 18:07 ET)
PDF file on some milling basics.
Bullet moulds  (Started: Mar. 7 2003, 07:04 ET, Last post: Mar. 20 2003, 05:08 ET)
..anyone making their own??
Varmint Al's Mini Lathe Website  (Started: Mar. 17 2003, 02:22 ET, Last post: Mar. 19 2003, 18:29 ET)
Center Drills  (Started: Mar. 13 2003, 08:03 ET, Last post: Mar. 19 2003, 08:07 ET)
Dumb question of the day, Part II  (Started: Mar. 19 2003, 00:03 ET, Last post: Mar. 19 2003, 08:00 ET)
Radial arm saw with metal cutting blade.
My mill tooling webpage  (Started: Feb. 17 2003, 17:35 ET, Last post: Mar. 18 2003, 19:09 ET)
Left-hand taps  (Started: Mar. 17 2003, 18:11 ET, Last post: Mar. 18 2003, 13:08 ET)
What's the best Shop apron to use?  (Started: Mar. 14 2003, 14:29 ET, Last post: Mar. 16 2003, 14:14 ET)
Caliper-style DRO's  (Started: Mar. 7 2003, 16:27 ET, Last post: Mar. 15 2003, 17:39 ET)
(looking for feedback from users)
How do you aneal and heat treat 6061 aluminum?  (Started: Mar. 12 2003, 15:00 ET, Last post: Mar. 12 2003, 17:15 ET)
Metal working
Lathe question...  (Started: Feb. 28 2003, 22:32 ET, Last post: Mar. 12 2003, 10:03 ET)
a fouple of machinist terms  (Started: Dec. 31 2002, 16:28 ET, Last post: Mar. 11 2003, 16:30 ET)
what do they mean
Dumv question for the day  (Started: Mar. 7 2003, 14:38 ET, Last post: Mar. 11 2003, 10:03 ET)
Routers and gunsmithing. . .
metal source  (Started: Mar. 1 2003, 09:56 ET, Last post: Mar. 9 2003, 21:05 ET)
findind the right stuff
Decent Cheap Vise?  (Started: Mar. 8 2003, 14:29 ET, Last post: Mar. 8 2003, 17:05 ET)
Looking for something to start out with.
Can someone say anthing about this mill on ebay??  (Started: Mar. 6 2003, 23:45 ET, Last post: Mar. 8 2003, 11:22 ET)
and don't try and steal my auction!!!
jet mill  (Started: Mar. 7 2003, 01:46 ET, Last post: Mar. 7 2003, 17:03 ET)
just addin my 2cts.
Free CAD/CAM Program  (Started: Mar. 5 2003, 16:49 ET, Last post: Mar. 6 2003, 22:05 ET)
Download this program
Square Holes?  (Started: Feb. 22 2003, 10:56 ET, Last post: Mar. 6 2003, 07:12 ET)
Copper Vise Jaw thingys  (Started: Feb. 26 2003, 03:25 ET, Last post: Mar. 5 2003, 07:23 ET)
carbide boring bars  (Started: Mar. 2 2003, 21:03 ET, Last post: Mar. 4 2003, 02:24 ET)
on sale at MSC
What a Mess!  (Started: Feb. 21 2003, 07:21 ET, Last post: Mar. 3 2003, 00:59 ET)
More HF mill accurizing  (Started: Feb. 28 2003, 13:06 ET, Last post: Feb. 28 2003, 13:23 ET)
pics galore
Gears  (Started: Feb. 27 2003, 16:52 ET, Last post: Feb. 27 2003, 16:52 ET)
Found a place for lathe gears
Homier vs. Harbor Freight  (Started: Feb. 14 2003, 09:34 ET, Last post: Feb. 26 2003, 14:14 ET)
Is there a diff?
My future Machine Shop  (Started: Feb. 25 2003, 15:53 ET, Last post: Feb. 26 2003, 02:12 ET)
Heat treating oven revisited  (Started: Feb. 21 2003, 23:04 ET, Last post: Feb. 26 2003, 02:03 ET)
Just bought a mill  (Started: Feb. 14 2003, 22:37 ET, Last post: Feb. 25 2003, 19:43 ET)
Got my HF MILL- - Questions..  (Started: Feb. 13 2003, 09:21 ET, Last post: Feb. 24 2003, 13:22 ET)
T-Nuts- - My 1st Project  (Started: Feb. 21 2003, 13:23 ET, Last post: Feb. 24 2003, 08:39 ET)
Setting up...  (Started: Feb. 23 2003, 08:02 ET, Last post: Feb. 24 2003, 08:15 ET)
metal numbers  (Started: Feb. 11 2003, 15:20 ET, Last post: Feb. 21 2003, 18:21 ET)
what do they mean
Hold Downs...what thread?  (Started: Feb. 20 2003, 16:54 ET, Last post: Feb. 21 2003, 17:29 ET)
Sherline mills?  (Started: Feb. 19 2003, 07:32 ET, Last post: Feb. 21 2003, 10:46 ET)
Shop Report on Enco Collets  (Started: Feb. 21 2003, 07:27 ET, Last post: Feb. 21 2003, 10:42 ET)
RPM's Revisited  (Started: Feb. 21 2003, 07:15 ET, Last post: Feb. 21 2003, 10:05 ET)
Shell Mill vs. Endmill  (Started: Feb. 18 2003, 13:38 ET, Last post: Feb. 20 2003, 10:19 ET)
Blast Cabinets  (Started: Dec. 26 2002, 10:25 ET, Last post: Feb. 19 2003, 20:41 ET)
How would I go about...  (Started: Feb. 19 2003, 00:02 ET, Last post: Feb. 19 2003, 12:50 ET)
Please Identify this mill  (Started: Feb. 14 2003, 12:37 ET, Last post: Feb. 19 2003, 11:18 ET)
Good deal?
Heat Treat Furnace  (Started: Feb. 11 2003, 08:02 ET, Last post: Feb. 18 2003, 23:23 ET)
roll your own?
Bushing a 700 bolt  (Started: Feb. 15 2003, 22:59 ET, Last post: Feb. 18 2003, 17:48 ET)
Logan lathe  (Started: Feb. 18 2003, 11:39 ET, Last post: Feb. 18 2003, 17:40 ET)
repairing gears
New to list..........Photos in my photo album  (Started: Feb. 16 2003, 07:25 ET, Last post: Feb. 16 2003, 07:25 ET)
Cutting Metal Chunks  (Started: Dec. 26 2002, 10:23 ET, Last post: Feb. 15 2003, 10:05 ET)
where can i find this?  (Started: Feb. 5 2003, 15:39 ET, Last post: Feb. 15 2003, 10:05 ET)
Shop Almost Completed!!!!!  (Started: Feb. 10 2003, 22:15 ET, Last post: Feb. 15 2003, 00:49 ET)
Finally getting Somewhere
Government auction  (Started: Feb. 12 2003, 19:39 ET, Last post: Feb. 14 2003, 10:16 ET)
Milling machines
machinery handbook  (Started: Feb. 14 2003, 09:54 ET, Last post: Feb. 14 2003, 09:54 ET)
$59.99 Enco sale
pictures of a crown job  (Started: Feb. 12 2003, 20:07 ET, Last post: Feb. 12 2003, 20:51 ET)
10EE  (Started: Feb. 10 2003, 00:30 ET, Last post: Feb. 12 2003, 19:51 ET)
anyone use one for barrel work
TableTop Covering  (Started: Feb. 10 2003, 09:11 ET, Last post: Feb. 11 2003, 22:36 ET)
some barreling picts  (Started: Feb. 11 2003, 00:27 ET, Last post: Feb. 11 2003, 22:29 ET)
Mini Lathe & Rifle Barrels?  (Started: Dec. 12 2002, 18:58 ET, Last post: Feb. 11 2003, 00:18 ET)
Which Mini-Mill to Get?  (Started: Feb. 10 2003, 14:12 ET, Last post: Feb. 10 2003, 16:46 ET)
8" Rotary Table  (Started: Feb. 9 2003, 11:34 ET, Last post: Feb. 9 2003, 11:34 ET)
finally tried it out
vises for my new mill  (Started: Feb. 6 2003, 18:56 ET, Last post: Feb. 9 2003, 09:39 ET)
Upgrading machine power  (Started: Jan. 30 2003, 13:51 ET, Last post: Feb. 8 2003, 19:29 ET)
3phase, and VFD's
can you buy...?  (Started: Feb. 8 2003, 07:09 ET, Last post: Feb. 8 2003, 08:45 ET)
New Mill Woes and a Thumbs Up to HF  (Started: Feb. 3 2003, 18:12 ET, Last post: Feb. 6 2003, 10:51 ET)
I gots to have a mill ! ! ! ! ! !  (Started: Feb. 3 2003, 14:26 ET, Last post: Feb. 5 2003, 13:44 ET)
Is this the machine for me?
Source for Delrin  (Started: Feb. 3 2003, 17:39 ET, Last post: Feb. 4 2003, 07:02 ET)
Can anyone help?
figuring out how many rpms  (Started: Oct. 8 2001, 02:28 ET, Last post: Feb. 3 2003, 18:31 ET)
math stuff
Milling Machine Controls Help Needed  (Started: Jan. 31 2003, 17:27 ET, Last post: Feb. 3 2003, 17:32 ET)
Miller Help
1934 beretta  (Started: Feb. 2 2003, 14:58 ET, Last post: Feb. 2 2003, 17:06 ET)
Buying carbide endmills  (Started: Feb. 1 2003, 23:32 ET, Last post: Feb. 2 2003, 04:01 ET)
What type of mill to buy??  (Started: Jan. 18 2003, 12:51 ET, Last post: Jan. 30 2003, 14:39 ET)
looking to buy mill
Advice Please: "Index" Vertical Knee Mill  (Started: Jan. 21 2003, 19:09 ET, Last post: Jan. 29 2003, 22:11 ET)
A new mill  (Started: Dec. 23 2002, 14:42 ET, Last post: Jan. 29 2003, 22:08 ET)
used mill that is
Engraving w/CNC?  (Started: Jan. 28 2003, 10:27 ET, Last post: Jan. 29 2003, 12:30 ET)
or is a pantograph necessary
slitting the noses of hp pistol bullets.  (Started: Jan. 27 2003, 10:10 ET, Last post: Jan. 29 2003, 10:57 ET)
The way I do this on a friend's horizon-
Tannery Shop update  (Started: Jan. 23 2003, 07:51 ET, Last post: Jan. 27 2003, 23:19 ET)
endmill sharping  (Started: Jan. 2 2003, 16:37 ET, Last post: Jan. 24 2003, 21:03 ET)
Machining 4130 steel, what tooling to use?  (Started: Jan. 24 2003, 09:04 ET, Last post: Jan. 24 2003, 19:22 ET)
Machining Titanium  (Started: Jan. 5 2003, 18:29 ET, Last post: Jan. 24 2003, 10:45 ET)
Bandsaw at HArbor Freight  (Started: Jan. 9 2003, 02:11 ET, Last post: Jan. 21 2003, 13:20 ET)
Source needed for used, portable generators  (Started: Nov. 20 2002, 16:49 ET, Last post: Jan. 18 2003, 11:50 ET)
over 3000 w, but dont need over 5000w
Automated Mini-Mill  (Started: Jan. 13 2003, 20:41 ET, Last post: Jan. 17 2003, 17:33 ET)
CNC
Harbor Freight Mini Multipurpose  (Started: Jan. 14 2003, 10:44 ET, Last post: Jan. 17 2003, 11:02 ET)
ooh ooh ooh...Homier is coming!!  (Started: Jan. 15 2003, 10:38 ET, Last post: Jan. 16 2003, 08:40 ET)
More Blasting Questions  (Started: Jan. 10 2003, 07:21 ET, Last post: Jan. 15 2003, 10:23 ET)
Let's Talk Blasting...  (Started: Dec. 31 2002, 12:34 ET, Last post: Jan. 13 2003, 23:42 ET)
Clamping kit  (Started: Jan. 10 2003, 23:47 ET, Last post: Jan. 13 2003, 21:38 ET)
Help
Got Lucky Last night - Compressor!!  (Started: Jan. 8 2003, 03:09 ET, Last post: Jan. 13 2003, 17:11 ET)
Patience Pays
3 phase rotary converted FS  (Started: Jan. 10 2003, 16:21 ET, Last post: Jan. 10 2003, 16:21 ET)
Apartment machine shop  (Started: Jan. 7 2003, 07:12 ET, Last post: Jan. 10 2003, 13:11 ET)
Finally used my mini-lathe for threading  (Started: Nov. 11 2002, 10:03 ET, Last post: Jan. 10 2003, 01:08 ET)
Need help with mini mill selection  (Started: Dec. 30 2002, 17:13 ET, Last post: Jan. 9 2003, 02:18 ET)
2 Flute or 4  (Started: Jan. 4 2003, 11:39 ET, Last post: Jan. 6 2003, 11:31 ET)
whats the difference
Emachineshop  (Started: Jan. 5 2003, 11:17 ET, Last post: Jan. 5 2003, 19:34 ET)
Check this out!
Novak sight dovetails in Browning hi-power  (Started: Dec. 28 2002, 20:44 ET, Last post: Jan. 4 2003, 15:09 ET)
How do you get pretty turnings?  (Started: Dec. 9 2002, 08:05 ET, Last post: Jan. 1 2003, 08:32 ET)
Mine look like crap
Mini Mill Power Feed  (Started: Dec. 31 2002, 07:33 ET, Last post: Dec. 31 2002, 17:18 ET)
DIY Article
New Toys  (Started: Dec. 30 2002, 18:08 ET, Last post: Dec. 31 2002, 17:05 ET)
Y'all seen this yet?  (Started: Dec. 21 2002, 15:46 ET, Last post: Dec. 31 2002, 02:19 ET)
Power feed for mini mill
Newbie Questions  (Started: Dec. 30 2002, 15:32 ET, Last post: Dec. 30 2002, 16:48 ET)
Source for metal  (Started: Nov. 15 2002, 01:41 ET, Last post: Dec. 30 2002, 13:21 ET)
Where do you get yours?
Rotary Table Question  (Started: Nov. 25 2002, 10:54 ET, Last post: Dec. 26 2002, 20:42 ET)
Could I use a radial arm saw for a alloy frame?  (Started: Dec. 25 2002, 13:47 ET, Last post: Dec. 25 2002, 19:10 ET)
Metal ID  (Started: Dec. 23 2002, 15:24 ET, Last post: Dec. 23 2002, 22:53 ET)
Turning Tapers  (Started: Dec. 8 2002, 18:48 ET, Last post: Dec. 23 2002, 13:54 ET)
or, what to do with the wrong taper...
Mounting DRO  (Started: Dec. 10 2002, 19:01 ET, Last post: Dec. 17 2002, 23:07 ET)
lathe
Homier or Grizzly 7 x 12  (Started: Dec. 10 2002, 18:33 ET, Last post: Dec. 17 2002, 22:55 ET)
"reading chips" from your turnings  (Started: Dec. 13 2002, 02:49 ET, Last post: Dec. 16 2002, 22:14 ET)
lathe info for y'all to check out.
Could a dremel with a router atachment be used to  (Started: Dec. 9 2002, 20:21 ET, Last post: Dec. 16 2002, 11:05 ET)
cut 1911 rails?
Here lil' doggy....  (Started: Dec. 11 2002, 21:50 ET, Last post: Dec. 12 2002, 07:28 ET)
or, adventures in machining
Fixing the mini mill metric inch problem  (Started: Nov. 17 2002, 00:18 ET, Last post: Dec. 10 2002, 19:00 ET)
Carriage before the Horse  (Started: Dec. 2 2002, 22:44 ET, Last post: Dec. 10 2002, 15:17 ET)
tooling
Is this a fair price?  (Started: Dec. 6 2002, 17:24 ET, Last post: Dec. 8 2002, 16:47 ET)
Need a machinist to build something for me  (Started: Dec. 5 2002, 10:03 ET, Last post: Dec. 8 2002, 15:07 ET)
Brass Machined parts needed cheap
Getting started  (Started: Dec. 2 2002, 13:01 ET, Last post: Dec. 3 2002, 21:41 ET)
new to metal working
Ever heard of this company?  (Started: Nov. 24 2002, 20:27 ET, Last post: Dec. 3 2002, 20:58 ET)
Acme threading?  (Started: Dec. 3 2002, 03:16 ET, Last post: Dec. 3 2002, 12:31 ET)
Mill and Machining Questions  (Started: Dec. 1 2002, 21:40 ET, Last post: Dec. 3 2002, 09:12 ET)
Acme threading?  (Started: Dec. 3 2002, 03:11 ET, Last post: Dec. 3 2002, 03:11 ET)
new guy here, getting more tooling...need advice..  (Started: Nov. 20 2002, 21:36 ET, Last post: Dec. 2 2002, 09:14 ET)
Unusual Bridgeport  (Started: Nov. 22 2002, 11:44 ET, Last post: Dec. 1 2002, 19:28 ET)
link to strange mill for sale in OH
Hey Pvt. Ryan!  (Started: Jan. 5 2002, 01:48 ET, Last post: Dec. 1 2002, 13:29 ET)
Why'd you buy a second Mill?
Fabricating A Reloading Press?  (Started: Nov. 21 2002, 03:08 ET, Last post: Nov. 30 2002, 12:14 ET)
Homier mini mill  (Started: Nov. 9 2002, 07:01 ET, Last post: Nov. 27 2002, 20:37 ET)
Got my X-axis DRO installed  (Started: Nov. 26 2002, 23:55 ET, Last post: Nov. 27 2002, 19:58 ET)
a few photos
This guy did it all by eye and hand, man  (Started: Nov. 21 2002, 16:23 ET, Last post: Nov. 27 2002, 12:28 ET)
has a speed control box for the Dremel
1911 grooving  (Started: Mar. 26 2002, 21:15 ET, Last post: Nov. 27 2002, 12:24 ET)
broken mill and lathe  (Started: Nov. 17 2002, 02:29 ET, Last post: Nov. 27 2002, 09:38 ET)
1911 80% rail slot cutting  (Started: Nov. 26 2002, 16:33 ET, Last post: Nov. 26 2002, 16:34 ET)
Sorry, was in a hurry, thought I'd
Sandblast Cabinet  (Started: Nov. 21 2002, 19:12 ET, Last post: Nov. 23 2002, 10:17 ET)
Great Deal!
A few quick questions about different steels  (Started: Nov. 15 2002, 01:50 ET, Last post: Nov. 23 2002, 01:38 ET)
4130CM, 303Stainless, 416Stainless
Digital dial indicator as cheap DRO?  (Started: Nov. 16 2002, 19:34 ET, Last post: Nov. 20 2002, 22:11 ET)
Harbor Freights "new" micro mill/drill  (Started: Nov. 15 2002, 10:19 ET, Last post: Nov. 20 2002, 20:07 ET)
for $299
I guess you need a mill to cut frame rails right?  (Started: Nov. 17 2002, 20:21 ET, Last post: Nov. 17 2002, 23:34 ET)
Frank's new mill  (Started: Nov. 15 2002, 12:17 ET, Last post: Nov. 15 2002, 20:20 ET)
How do they cut the breech face in a slide?  (Started: Nov. 12 2002, 02:10 ET, Last post: Nov. 12 2002, 21:11 ET)
That is one tight corner to get at!
Tooling / Bits Identified?  (Started: Nov. 11 2002, 20:32 ET, Last post: Nov. 12 2002, 14:02 ET)
Check these out, whatever they are...
Do I need a lathe?  (Started: Nov. 12 2002, 12:33 ET, Last post: Nov. 12 2002, 13:01 ET)
and if so how big?
Grizzly G1005  (Started: Nov. 7 2002, 12:05 ET, Last post: Nov. 8 2002, 18:54 ET)
Roughing endmill  (Started: Oct. 13 2002, 13:51 ET, Last post: Nov. 6 2002, 22:35 ET)
Small tooling  (Started: Nov. 6 2002, 21:59 ET, Last post: Nov. 6 2002, 21:59 ET)
A Good Experience  (Started: Nov. 5 2002, 10:27 ET, Last post: Nov. 5 2002, 10:27 ET)
JTS Machinery are "good people"
cutting fluids  (Started: Oct. 12 2002, 23:24 ET, Last post: Nov. 5 2002, 01:21 ET)
what do you use?
Question for Pvt. Ryan  (Started: Nov. 2 2002, 22:04 ET, Last post: Nov. 4 2002, 16:37 ET)
fast endmill question  (Started: Nov. 2 2002, 23:10 ET, Last post: Nov. 4 2002, 11:02 ET)
mini-mill vibration  (Started: Nov. 2 2002, 23:08 ET, Last post: Nov. 3 2002, 21:17 ET)
can this be tamed?
Mini-Contest for Machine Shop Guys...  (Started: Oct. 7 2002, 14:06 ET, Last post: Nov. 1 2002, 12:22 ET)
Easy to win, no big prizes though...
Resolution for Z axis?  (Started: Oct. 30 2002, 17:34 ET, Last post: Oct. 31 2002, 08:57 ET)
Super critical?
home engraving???  (Started: Oct. 28 2002, 00:36 ET, Last post: Oct. 30 2002, 19:54 ET)
building a ram EDM for mag well?  (Started: Oct. 16 2002, 12:35 ET, Last post: Oct. 27 2002, 14:53 ET)
First Equipment buys  (Started: Oct. 26 2002, 14:14 ET, Last post: Oct. 27 2002, 14:31 ET)
Homier shows in Turlock  (Started: Sep. 25 2002, 02:26 ET, Last post: Oct. 22 2002, 15:57 ET)
Metal fasteners, (screws, bolts)  (Started: Oct. 22 2002, 15:10 ET, Last post: Oct. 22 2002, 15:10 ET)
New house  (Started: Oct. 16 2002, 17:59 ET, Last post: Oct. 21 2002, 01:58 ET)
I'll probably catch a little flak, but..  (Started: Oct. 14 2002, 10:26 ET, Last post: Oct. 20 2002, 23:32 ET)
I'll probably catch a little flak, but..
any one got a decimal conversion chart?  (Started: Oct. 16 2002, 12:29 ET, Last post: Oct. 20 2002, 21:13 ET)
covert fractions into decimals
Metal cutting band saw  (Started: Oct. 20 2002, 15:52 ET, Last post: Oct. 20 2002, 15:52 ET)
Looking for plans/blueprints
Dremel Router  (Started: Oct. 20 2002, 02:10 ET, Last post: Oct. 20 2002, 10:29 ET)
Milling machine tips...  (Started: Sep. 27 2002, 11:25 ET, Last post: Oct. 19 2002, 20:03 ET)
Cutting the mainspring slot?  (Started: Oct. 15 2002, 03:30 ET, Last post: Oct. 16 2002, 22:08 ET)
Inidcating a vise  (Started: Sep. 29 2002, 19:01 ET, Last post: Oct. 13 2002, 11:14 ET)
A pictorial
Hey PVT RYAN where did you get...  (Started: Oct. 9 2002, 14:54 ET, Last post: Oct. 9 2002, 22:49 ET)
magnetic holders for dial indicators
Cnc machines  (Started: Jul. 3 2002, 19:42 ET, Last post: Oct. 8 2002, 12:33 ET)
For 3 grand?
Aluminium/Alloy  (Started: Sep. 28 2002, 18:31 ET, Last post: Oct. 8 2002, 05:20 ET)
Casting Blanks
Should I be getting sparks?  (Started: Oct. 7 2002, 20:54 ET, Last post: Oct. 7 2002, 22:40 ET)
Cutting steel on a mini mill
Arrrgh!!!! Kurt style vise for mini mill?  (Started: Oct. 6 2002, 21:23 ET, Last post: Oct. 7 2002, 17:36 ET)
But the turn table will work out well
Magnet  (Started: Sep. 23 2002, 16:47 ET, Last post: Oct. 7 2002, 16:26 ET)
US-Made home mill any closer?  (Started: Oct. 1 2002, 19:56 ET, Last post: Oct. 2 2002, 12:07 ET)
being a pest....
Best fly cutters  (Started: Sep. 26 2002, 17:37 ET, Last post: Sep. 30 2002, 15:33 ET)
One of our own
Heat treating aluminum to T6  (Started: Sep. 18 2002, 23:30 ET, Last post: Sep. 30 2002, 10:14 ET)
home furnaces?
mill problem?  To slow?  (Started: Sep. 14 2002, 12:19 ET, Last post: Sep. 28 2002, 23:34 ET)
anybody ever tried Gingery books?  (Started: Sep. 25 2002, 14:06 ET, Last post: Sep. 27 2002, 19:18 ET)
How about this thing?  (Started: Sep. 26 2002, 11:06 ET, Last post: Sep. 26 2002, 20:22 ET)
A micro mill I found on ebay.
Grizzly mini mill problems  (Started: Sep. 24 2002, 22:03 ET, Last post: Sep. 25 2002, 12:19 ET)
How do you remove the taper shank?
Where do you get good deals on end mills?  (Started: Sep. 24 2002, 20:58 ET, Last post: Sep. 24 2002, 22:47 ET)
And do you buy HSS or cobalt?
Making a Blueprint from a Gun  (Started: Sep. 8 2002, 11:42 ET, Last post: Sep. 24 2002, 05:06 ET)
Where to Start
HSM back issue articles?  (Started: Sep. 23 2002, 16:34 ET, Last post: Sep. 23 2002, 17:26 ET)
Need help getting two articles from HSM
Poor man's dro  (Started: Aug. 27 2002, 22:42 ET, Last post: Sep. 21 2002, 08:38 ET)
Dro using computer and old mouse
Good place to obtain guages, etc.  (Started: Sep. 2 2002, 11:26 ET, Last post: Sep. 16 2002, 18:56 ET)
Where do you buy?
Rust protection for machine tools  (Started: Sep. 12 2002, 12:29 ET, Last post: Sep. 13 2002, 00:56 ET)
What's a dividing head?  (Started: Aug. 15 2002, 23:53 ET, Last post: Sep. 12 2002, 19:53 ET)
And what is it used for?
Chinese 7 x 12 mini lathe for $299  (Started: Sep. 8 2002, 22:29 ET, Last post: Sep. 9 2002, 04:42 ET)
Looking for Rubber Caps  (Started: Sep. 4 2002, 16:22 ET, Last post: Sep. 4 2002, 20:31 ET)
Where to get in small quantities?
Milling machine help  (Started: Sep. 1 2002, 08:39 ET, Last post: Sep. 4 2002, 19:33 ET)
R8 VS MT2
Blueprint reading  (Started: Aug. 31 2002, 02:30 ET, Last post: Sep. 2 2002, 10:57 ET)
Geometric Dimensioning and Tolerancing
building a mini mill  (Started: Aug. 31 2002, 04:33 ET, Last post: Aug. 31 2002, 22:30 ET)
Cnc plans for those interested  (Started: Aug. 29 2002, 14:01 ET, Last post: Aug. 29 2002, 17:55 ET)
Harbor bay products  (Started: Aug. 27 2002, 21:22 ET, Last post: Aug. 28 2002, 21:52 ET)
Mini mills
Hobbiest cnc router  (Started: Aug. 27 2002, 22:19 ET, Last post: Aug. 27 2002, 22:19 ET)
Dremel router table for cutting 1911 rails?  (Started: Aug. 25 2002, 22:34 ET, Last post: Aug. 27 2002, 16:44 ET)
Cnc wire edm plans  (Started: Jul. 12 2002, 13:21 ET, Last post: Aug. 24 2002, 17:07 ET)
What to do with a titanium rod....  (Started: Aug. 22 2002, 17:24 ET, Last post: Aug. 23 2002, 05:33 ET)
Cutting screw slots  (Started: Aug. 19 2002, 17:11 ET, Last post: Aug. 19 2002, 22:08 ET)
A quick and dirty shortcut
Drill chart for those that don't already have one  (Started: Aug. 19 2002, 14:54 ET, Last post: Aug. 19 2002, 22:00 ET)
Sae, metric, & decimal drill chart
Mini mill questions????  (Started: Aug. 7 2002, 09:27 ET, Last post: Aug. 19 2002, 19:07 ET)
Small endmills in dremel tool  (Started: Aug. 16 2002, 01:20 ET, Last post: Aug. 17 2002, 00:51 ET)
Is it safe?
Home-made power-feed?  (Started: Aug. 8 2002, 13:15 ET, Last post: Aug. 10 2002, 00:44 ET)
Using a drill to move the table...
Which hydraulic press  (Started: Jul. 15 2002, 08:55 ET, Last post: Aug. 3 2002, 15:00 ET)
Standard design or "a" frame
Air or electric spindle  (Started: Aug. 3 2002, 00:54 ET, Last post: Aug. 3 2002, 00:54 ET)
Could be a good deal  (Started: Aug. 1 2002, 08:00 ET, Last post: Aug. 1 2002, 08:38 ET)
For someone looking for a gunsmithing la
Bridgeport ball screws  (Started: Jul. 8 2002, 17:04 ET, Last post: Jul. 31 2002, 20:45 ET)
Time to tighten up the backlash
More on edm  (Started: Jun. 11 2002, 03:51 ET, Last post: Jul. 31 2002, 18:55 ET)
Home built edm is possible
Surface grinder / toolpost grinder  (Started: Jul. 4 2002, 00:53 ET, Last post: Jul. 29 2002, 22:33 ET)
Interesting site for home foundry  (Started: Jul. 13 2002, 11:40 ET, Last post: Jul. 14 2002, 22:38 ET)
Powdercoating frames?  (Started: Jul. 12 2002, 23:59 ET, Last post: Jul. 13 2002, 14:56 ET)
Hotcoat gun any good?
Home shop wiring  (Started: Jul. 8 2002, 22:35 ET, Last post: Jul. 12 2002, 17:38 ET)
Amps schmamps
Just back from the promised land....  (Started: Jul. 11 2002, 20:15 ET, Last post: Jul. 11 2002, 22:19 ET)
Took a drive to the grizzly showroom
Site for machining  (Started: Jul. 5 2002, 15:40 ET, Last post: Jul. 6 2002, 17:37 ET)
Models and aids
Mill sale at enco  (Started: Jul. 3 2002, 02:04 ET, Last post: Jul. 5 2002, 01:58 ET)
Vertical mills on sale
My home shop  (Started: Jun. 16 2002, 20:35 ET, Last post: Jul. 4 2002, 17:58 ET)
Almost ready
Major development - 1/4 scale mill  (Started: May 1 2002, 15:36 ET, Last post: Jul. 4 2002, 16:03 ET)
...you aint gonna believe this
Good source for 1/4" lathe bits?  (Started: Jul. 3 2002, 17:04 ET, Last post: Jul. 3 2002, 19:27 ET)
To fit my new tool holder
Interesting looking vertical mill  (Started: Jul. 3 2002, 17:12 ET, Last post: Jul. 3 2002, 17:12 ET)
On ebay right now
Well, i'm official now  (Started: Jul. 2 2002, 02:56 ET, Last post: Jul. 3 2002, 00:43 ET)
I'm a mill owner!
Toyo mini lathe?  junk or toy?  (Started: Jun. 20 2002, 15:10 ET, Last post: Jul. 2 2002, 03:54 ET)
Your lighting...  (Started: Jun. 28 2002, 19:14 ET, Last post: Jul. 1 2002, 09:31 ET)
I think this works pretty well...
I wonder if this is possible  (Started: Jun. 28 2002, 05:39 ET, Last post: Jun. 29 2002, 08:40 ET)
Gunsmithing lathe
Hibord tool??  (Started: Jun. 28 2002, 23:42 ET, Last post: Jun. 29 2002, 00:26 ET)
Reasonably priced dros
Newbie here  (Started: Jun. 27 2002, 02:27 ET, Last post: Jun. 28 2002, 23:57 ET)
Dro system at penn tool co.  (Started: Jun. 27 2002, 22:42 ET, Last post: Jun. 28 2002, 17:41 ET)
What do you think of this system?
Praise for littlemachineshop.com  (Started: Jun. 26 2002, 05:31 ET, Last post: Jun. 26 2002, 19:47 ET)
Great customer service!
Inspiration  (Started: Jun. 26 2002, 16:44 ET, Last post: Jun. 26 2002, 17:51 ET)
(check this guy out!)
Drill chuck adapting  (Started: Jun. 25 2002, 17:06 ET, Last post: Jun. 26 2002, 13:18 ET)
Stupid newbie question
Woohoo!  (Started: Jun. 20 2002, 15:40 ET, Last post: Jun. 25 2002, 23:09 ET)
Homier mini-mill
Question about the grizzly mini mill  (Started: Jun. 24 2002, 13:20 ET, Last post: Jun. 25 2002, 00:45 ET)
Taper shank
Support you site  (Started: Jun. 24 2002, 22:14 ET, Last post: Jun. 24 2002, 22:14 ET)
Harbor freight mini mill on sale!  (Started: Jun. 13 2002, 22:08 ET, Last post: Jun. 23 2002, 22:46 ET)
Bison vises  (Started: Jun. 22 2002, 12:26 ET, Last post: Jun. 23 2002, 17:31 ET)
Any opinions?
Potential home gunsmith lathe  (Started: Jun. 22 2002, 16:04 ET, Last post: Jun. 22 2002, 22:47 ET)
Lathemaster - good guys!
New homier mill owner with some questions  (Started: Jun. 15 2002, 04:00 ET, Last post: Jun. 20 2002, 16:44 ET)
Did i ruin my end mill holder already?
Glorious, glorious red goo  (Started: Jun. 19 2002, 22:09 ET, Last post: Jun. 20 2002, 09:51 ET)
How do you cut metal stock to size?  (Started: Jun. 13 2002, 16:59 ET, Last post: Jun. 20 2002, 01:03 ET)
Bandsaw, sawzall, hacksaw?
Today is the big day  (Started: Jun. 11 2002, 00:55 ET, Last post: Jun. 11 2002, 23:16 ET)
Well tomorrow actually
Diy cnc  (Started: Jun. 8 2002, 23:53 ET, Last post: Jun. 11 2002, 11:51 ET)
Anybody done it?
End mills in short supply?  (Started: Jun. 10 2002, 12:12 ET, Last post: Jun. 10 2002, 17:47 ET)
Loud squaking noise when milling...  (Started: Jun. 9 2002, 05:41 ET, Last post: Jun. 9 2002, 22:13 ET)
Need some help  (Started: Jun. 8 2002, 00:41 ET, Last post: Jun. 8 2002, 19:31 ET)
New toy  (Started: Apr. 24 2002, 22:24 ET, Last post: Jun. 7 2002, 22:06 ET)
Crappy pictures
Mini mill spindle kits  (Started: Jun. 7 2002, 11:44 ET, Last post: Jun. 7 2002, 17:50 ET)
Is it worth it?
Grizzly let me down!  (Started: May 28 2002, 12:04 ET, Last post: Jun. 7 2002, 02:00 ET)
My mill misadventures
Mill picture  (Started: Jun. 5 2002, 23:50 ET, Last post: Jun. 7 2002, 01:51 ET)
In full color 3d!
Web address for msc corp.? ntxt  (Started: Jun. 5 2002, 16:27 ET, Last post: Jun. 6 2002, 10:44 ET)
My head is about to explode  (Started: Jun. 3 2002, 17:07 ET, Last post: Jun. 6 2002, 10:01 ET)
Or what do i need to get started?
100 bucks burning a hole in my pocket need mill!!  (Started: May 31 2002, 20:09 ET, Last post: Jun. 3 2002, 14:28 ET)
Mills??????
Mill drills  (Started: May 30 2002, 14:29 ET, Last post: Jun. 1 2002, 08:40 ET)
Harbor freight geared head mill/drill  (Started: May 23 2002, 17:24 ET, Last post: May 31 2002, 10:42 ET)
Just ordered a hf mini-lathe  (Started: May 30 2002, 11:37 ET, Last post: May 30 2002, 11:37 ET)
How do you measure---  (Started: May 30 2002, 01:28 ET, Last post: May 30 2002, 10:16 ET)
Question on tools...  (Started: May 29 2002, 17:03 ET, Last post: May 30 2002, 10:08 ET)
Ok, i give up-???
Im back  (Started: May 28 2002, 22:54 ET, Last post: May 30 2002, 09:35 ET)
Hopefully
Hydrauilc trace mill?  (Started: May 17 2002, 17:00 ET, Last post: May 28 2002, 16:20 ET)
Does homier post their tent sale schedule?  (Started: May 20 2002, 21:02 ET, Last post: May 23 2002, 23:09 ET)
That tingling feeling when i touch my lathe...  (Started: May 18 2002, 13:37 ET, Last post: May 23 2002, 21:24 ET)
Center and edge finders  (Started: Apr. 8 2002, 20:57 ET, Last post: May 21 2002, 19:17 ET)
Looking for detailed instructions
Know anything about atlas lathes?  (Started: Apr. 23 2002, 13:12 ET, Last post: May 20 2002, 23:08 ET)
Test indicator holder  (Started: May 14 2002, 21:41 ET, Last post: May 16 2002, 17:35 ET)
Mini-review...
I need air!  (Started: May 13 2002, 03:05 ET, Last post: May 15 2002, 14:53 ET)
Sears has some good deals going...
3 square file  (Started: May 7 2002, 21:06 ET, Last post: May 13 2002, 16:26 ET)
Sight cutting help  (Started: May 10 2002, 21:56 ET, Last post: May 12 2002, 21:48 ET)
How blind hog helped me with this sight
Where do you guys find metals for cheap?  (Started: Apr. 11 2002, 20:26 ET, Last post: May 10 2002, 12:05 ET)
Some of you will find this interesting  (Started: Apr. 30 2002, 19:57 ET, Last post: May 5 2002, 20:23 ET)
Small cnc and milling machines
Shopmaster or shoptask machines.  (Started: Apr. 30 2002, 17:57 ET, Last post: May 2 2002, 10:10 ET)
Grizzly g8689 mini-mill  (Started: Apr. 28 2002, 10:13 ET, Last post: May 2 2002, 03:19 ET)
On sale now!
Toolmaker screwless vise  (Started: Apr. 26 2002, 19:21 ET, Last post: May 1 2002, 11:35 ET)
Mounting
Need advice on a soft bite chuck for turning brass  (Started: Apr. 25 2002, 10:09 ET, Last post: Apr. 30 2002, 17:55 ET)
Got mini-mill from homier.  (Started: Apr. 29 2002, 20:53 ET, Last post: Apr. 30 2002, 17:23 ET)
Its hella cool
Anyone use combination mill/lathe?  (Started: Apr. 23 2002, 20:35 ET, Last post: Apr. 30 2002, 05:34 ET)
Mini-lathe vs. mini-mill  (Started: Apr. 26 2002, 10:11 ET, Last post: Apr. 29 2002, 14:07 ET)
How to polish a round cylinder?  (Started: Apr. 25 2002, 20:23 ET, Last post: Apr. 26 2002, 00:14 ET)
(without a lathe)
Golmatic md23-l  (Started: Apr. 25 2002, 14:14 ET, Last post: Apr. 25 2002, 16:42 ET)
Anyone want to buy me one of these?
For those on a limited budget  (Started: Apr. 11 2002, 15:52 ET, Last post: Apr. 24 2002, 08:03 ET)
Think this will work for me?
Cutting fluids  (Started: Apr. 5 2002, 18:18 ET, Last post: Apr. 22 2002, 00:49 ET)
Mini-Lathe 7X10  (Started: Jan. 9 2002, 18:41 ET, Last post: Apr. 20 2002, 12:50 ET)
Tramming mini mill's  (Started: Apr. 19 2002, 15:46 ET, Last post: Apr. 19 2002, 19:50 ET)
Tram about 3 axis?
I got my mill today  (Started: Apr. 12 2002, 12:33 ET, Last post: Apr. 19 2002, 14:49 ET)
Rotary phase converter  (Started: Apr. 18 2002, 11:17 ET, Last post: Apr. 18 2002, 23:01 ET)
Mini mill vibrations...  (Started: Apr. 16 2002, 19:50 ET, Last post: Apr. 16 2002, 23:24 ET)
Diy dro conversion?  (Started: Apr. 6 2002, 21:54 ET, Last post: Apr. 15 2002, 10:27 ET)
On an enco 16 3/8" mill/drill
Mill set up...  (Started: Apr. 13 2002, 23:55 ET, Last post: Apr. 14 2002, 22:18 ET)
How do i mount dial indicators to a mill???  (Started: Apr. 14 2002, 00:20 ET, Last post: Apr. 14 2002, 10:52 ET)
I cant wait...  (Started: Apr. 11 2002, 10:48 ET, Last post: Apr. 11 2002, 22:30 ET)
Firing pin spring  (Started: Apr. 11 2002, 18:05 ET, Last post: Apr. 11 2002, 18:05 ET)
What works with the titanium firing pins
Photosensor tachometer  (Started: Apr. 9 2002, 17:09 ET, Last post: Apr. 10 2002, 18:42 ET)
A great harbor freight find!
Another good website...  (Started: Apr. 9 2002, 14:44 ET, Last post: Apr. 9 2002, 14:44 ET)
Upgraded Mill....  (Started: Mar. 19 2002, 22:31 ET, Last post: Apr. 6 2002, 19:41 ET)
thinking about this one
1/16 keyway cutter??  (Started: Apr. 6 2002, 14:41 ET, Last post: Apr. 6 2002, 15:58 ET)
What should i get first?  (Started: Mar. 27 2002, 07:50 ET, Last post: Apr. 6 2002, 15:27 ET)
Whats the difference?  (Started: Apr. 4 2002, 00:07 ET, Last post: Apr. 6 2002, 01:45 ET)
2 mini mills at harbor freight.
Machining terms  (Started: Apr. 5 2002, 00:54 ET, Last post: Apr. 5 2002, 13:28 ET)
Sherline mills -big enough?  (Started: Apr. 3 2002, 11:33 ET, Last post: Apr. 4 2002, 19:38 ET)
Is the sherline practical for gunsmiths?
Where to get x-y tables??  (Started: Mar. 31 2002, 04:39 ET, Last post: Apr. 3 2002, 22:24 ET)
Is a coolant system necessary?  (Started: Mar. 28 2002, 20:55 ET, Last post: Apr. 3 2002, 20:45 ET)
Milling with a lathe  (Started: Apr. 1 2002, 01:04 ET, Last post: Apr. 1 2002, 20:17 ET)
1903 hendley  (Started: Mar. 29 2002, 18:03 ET, Last post: Mar. 29 2002, 23:13 ET)
Definately not new, but new to me.....
"Number" drills?  (Started: Feb. 13 2002, 01:18 ET, Last post: Mar. 26 2002, 21:21 ET)
What's the conversion?
Broaching a keyway question  (Started: Mar. 19 2002, 14:32 ET, Last post: Mar. 22 2002, 10:53 ET)
.....help please
David Gingery's books  (Started: Jan. 14 2002, 03:21 ET, Last post: Mar. 11 2002, 19:32 ET)
"Build your own machine shop from scrap"
Griz....details posted Now  (Started: Sep. 12 2001, 14:07 ET, Last post: Mar. 10 2002, 12:59 ET)
for those of you who want to know.
What does "indexable" mean?  (Started: Feb. 16 2002, 13:50 ET, Last post: Mar. 7 2002, 10:36 ET)
measuring tool basics  (Started: Jan. 20 2002, 01:40 ET, Last post: Feb. 28 2002, 18:34 ET)
care and feeding
.575 x 40 die source  (Started: Feb. 13 2002, 21:20 ET, Last post: Feb. 22 2002, 13:34 ET)
shadetree solutions
Question for mikey  (Started: Feb. 10 2002, 09:35 ET, Last post: Feb. 12 2002, 00:29 ET)
...rust and lube.....
what drill to use for what tap  (Started: Jan. 28 2002, 22:38 ET, Last post: Feb. 10 2002, 23:09 ET)
figuring tap drill size without chart.
Tabletop Milling Machines  (Started: Jan. 6 2002, 01:10 ET, Last post: Jan. 24 2002, 13:42 ET)
Use, accuracy and shortcomings
AGI's "Machine Shop Course"?  (Started: Jan. 18 2002, 06:19 ET, Last post: Jan. 21 2002, 21:53 ET)
Anyone have it/them?
thoughts on carbide  (Started: Oct. 8 2001, 02:00 ET, Last post: Jan. 13 2002, 23:01 ET)
watch out ,ive been thinking
New forum area added  (Started: Jan. 12 2002, 00:10 ET, Last post: Jan. 13 2002, 16:23 ET)
might be fun...
Mini-Mill DRO's ON SALE !!  (Started: Dec. 13 2001, 23:38 ET, Last post: Jan. 12 2002, 00:33 ET)
Mill owners check this out...